Siemens AG Rated Rated current 1FK7 Compact. I rated (15.4) 11.5 (25.4) (2.9) 3.3 (4.4)
|
|
- Cynthia Wiggins
- 6 years ago
- Views:
Transcription
1 Synchronous motors Siemens FK7 Compact motors Nural cooling Selection and ordering da Red speed Shaft height Red Stic torque Red Red FK7 Compact torque ) synchronous motor Nural cooling Number of pole pairs Rotor moment of inertia (out brake) Weight (out brake) n red S P red T= K rpm kw (P) M T= K M red T= K I red T= K Order No. - kgm ( - lb f -in-s ) m kg (lb). (.7) 7 (.). (.).6 FK7-C (7.7) (6.). (7.) 6 (6. (.). FK7-C (.) (6.) 7.7 (.) (.) 7 (7.) 6 FK7-C () (6.). (.). (.).6 (.). FK7-F (.6. (.) 6. (.). (.) 6. (.) (.).7 (.) 7. (.).7.6 FK76-F FK76-F (7.). (.) 7. (.). (.). (.). (.). (.) 6 (.) 6. (.). (7.7). 7. FK7-F FK7-F (.) 7. (.) (.) (.).77 (.).7 (6.).7 (7.) ).7 (.) (.) 7 (.) 6 (6. (.). (.). (.). (.) ) 6. (.).. 6. ) FK7-F FK7-F FK7-F FK7-F (.) 7. (7.7) (.) 6 () (.) (6.) (6.) (6.) 6.7 (.). (.) ) 6. (.) (.).7 (.7). (.7) ). 6. ) FK FK (7.). (.) 7. (.). (.). (.) ). (.) ). (.) 6 (.).7 (.) ). (6.) ).6 ) ) FK FK (.) 7. (.) (.) (.) 6. (.). (.). (.). (.). (.).6 (.).. FK7-K7-7 7 FK7-K (.. (.). (.). (.). (.. (..6 (.). FK7-K (.). (.) 6. (.7).6 (.). (.).6 (.). (.. (.7).. FK7-K FK7-K (.). (.).7 (6.).7 (.).6 (.). (.) ).6 (.). (.). (.). (.) ).7. ) FK7-K FK7-K (.). (.6. (7.7). (.) out RIVE-CLiQ interface: Incremental encoder sin/cos V pp S/R bsolute encoder En S/R ) (not for FK7 to FK7) bsolute encoder En S/R ) (only for FK7 to FK7) bsolute encoder En S/R ) (not for FK7 to FK7) bsolute encoder En 6 S/R ) (only for FK7 to FK7) Multi-pole resolver -pole resolver E S T RIVE-CLiQ interface ) : bit incremental encoder (not for FK7) bit absolute encoder, single-turn + bit multi-turn ) (not for FK7 to FK7) bit absolute encoder, single-turn + bit multi-turn ) (only for FK7/FK7) 6 bit absolute encoder, single-turn + bit multi-turn ) (not for FK7 to FK7) bit absolute encoder, single-turn + bit multi-turn ) (only for FK7/FK7) bit resolver (not for FK7) bit resolver (not for FK7) F L K V U P Shaft extension: Shaft and flange accuracy: olding brake: out out B egree of protection: IP6 (not for FK7) IP6 and E flange IP67 (not for FK7) IP6 (IP for FK7) and anthracite paint finish IP6 and E flange IP67, anthracite paint finish (not for FK7) IP6 and E flange IP67, anthracite paint finish and metal ring ple on motor (not for FK7) To select the degree of protection and type of construction, see selection guides.
2 Siemens Synchronous motors FK7 Compact motors Nural cooling Selection and ordering da Motor type (continued) Stic Calculed P calc ) I P calc M for M T= K T= K SINMICS S Motor Module Red Booksize form output ) I red Power cable complete shield Motor connection (and brake connection) via connector Power connector Cable crosssection 7) kw (P) Order No. Size mm Order No. Pre-assembled cable FK7-C (7. 6SL7-7TE-. x. 6FX7-7S-... FK7-C (.) 6SL7-7TE-. x. 6FX7-7S-... FK7-C7... (.) 6SL7-7TE-. x. 6FX7-7S-... FK7-F (.) 6SL7-7TE- x. 6FX7-7S-... FK76-F7... FK76-F (.. (.7) 6SL7-7TE- 6SL7-7TE- x. x. 6FX7-7S-... 6FX7-7S-... FK7-F7... FK7-F (.). (6.7) 6SL7-7TE- 6SL7-7TE- x. x. 6FX7-7S-... 6FX7-7S-... FK7-F7... FK7-F7... FK7-F7... FK7-F (7.. (.). (.) (.) 6SL7-7TE- 6SL7-7TE- 6SL7 - TE- 6SL7 - TE-... x. x. x x 6FX7-7S-... 6FX7-7S-... 6FX7-7S-... 6FX7-7S6-... FK FK (.). (7.) 6SL7-7TE- 6SL7-7TE- x. x. 6FX7-7S-... 6FX7-7S-... FK FK (.) 7. (.) 6SL7-7TE- 6SL7-7TE- x. x. 6FX7-7S-... 6FX7-7S-... FK7-K7... FK7-K (.). (.) 6SL7-7TE- 6SL7-7TE-.. x. x. 6FX FX--... FK7-K (.7) 6SL7-7TE- x. 6FX7-7S-... FK7-K7... FK7-K (.). (.) 6SL7-7TE- 6SL7-7TE- x. x. 6FX7-7S-... 6FX7-7S-... FK7-K7... FK7-K (.). (. 6SL7-7TE- 6SL7-7TE- x. x. 6FX7-7S-... 6FX7-7S-... Cooling: Internal air cooling External air cooling Motor Module: Single Motor Module ouble Motor Module Type of cable: MOTION-CONNECT MOTION-CONNECT Without brake cores With brake cores C For length code as well as and signal cables, see Connection system MOTION-CONNECT.... ) If the absolute encoder is used, M red is reduced by %. ) These values refer to n = rpm. ) These values refer to n = rpm. ) These values refer to n = rpm. ) These values refer to n = rpm. With the specified Motor Module, the motor cannot be fully utilized M T = K winding temperure rise. If a Motor Module a higher ring is used, you must check whether the specified cable can be connected to it. 7) The carrying capacity of the cables complies EN 6- for installion type C, for continuous duty an ambient air temperure of C ( F). ) Motors shaft height are not available a RIVE-CLiQ interface. The encoder systems are connected via the SMC (Sensor Module Cabinet-Mounted). ) With default setting of the pulse frequency. ) Pcalc [kw] = M [] x n red P calc [P] = M [Ib f -in] x n red 6
3 Synchronous motors Siemens FK7 igh ynamic motors Nural cooling Selection and ordering da Red speed Shaft height Red Stic torque Red torque ) Red FK7 igh ynamic synchronous motor Nural cooling Number of pole pairs Rotor moment of inertia (out brake) Weight (out brake) n red S P red T= K rpm kw (P) M T= K M red T= K I red T= K Order No. - kgm ( - lb f -in-s ) m kg (lb). (.). (.). (. FK7-7F (.) 7.7 (7) 6.7 (.). (.7) 6. (.7) (.). (.). (.). 7. FK76-7F FK76-7F (.) 6. (.7) (.). (.). (.) ).77 (. ) (6.) (. (.) ) (.) ). ). ) FK7-7F FK76-7F (.) (.). (.). (.). (.. (.). (.). (.).6 (.). (.). FK FK (.). (.) 6. (.) 7.7 (7) 6. (.7).6 (. 6. (.7) (.). (.). (.7). 7 FK FK (.) 6. (.7) (.). (.) (.7. (.). (.7). FK7-7K (.). (6.).6 (.. (.). (.). FK7-7K (.) 6. (.) out RIVE-CLiQ interface: Incremental encoder sin/cos V pp S/R bsolute encoder En S/R ) (not for FK7) bsolute encoder En S/R ) (only for FK7) bsolute encoder En S/R ) (not for FK7) bsolute encoder En 6 S/R ) (only for FK7) Multi-pole resolver -pole resolver E S T RIVE-CLiQ interface: bit incremental encoder bit absolute encoder, single-turn + bit multi-turn ) (not for FK7) bit absolute encoder, single-turn + bit multi-turn ) (only for FK7) 6 bit absolute encoder, single-turn + bit multi-turn ) (not for FK7) bit absolute encoder, single-turn + bit multi-turn ) (only for FK7) bit resolver bit resolver F L K V U P Shaft extension: Shaft and flange accuracy: olding brake: out out B egree of protection: IP6 IP6 and E flange IP67 IP6 and anthracite paint finish IP6 and E flange IP67, anthracite paint finish IP6 and E flange IP67, anthracite paint finish and metal ring ple on motor To select the degree of protection and type of construction, see selection guides.
4 Siemens Synchronous motors FK7 igh ynamic motors Nural cooling Selection and ordering da Motor type (continued) Stic Calculed P calc SINMICS S Motor Module Red Booksize form output ) Power cable complete shield Motor connection (and brake connection) via connector I P calc M for M T= K T= K I red Power connector Cable crosssection ) Pre-assembled cable kw (P) Order No. Size mm Order No. FK7-7F (.7) 6SL7-7TE- x. 6FX7-7S-... FK76-7F7... FK76-7F (.7). (.) 6SL7-7TE- 6SL7-7TE- x. x. 6FX7-7S-... 6FX7-7S-... FK7-7F7... FK76-7F (.). (.) 6SL7 - TE- 6SL7 - TE-.. x x 6FX7-7S-... 6FX7-7S-... FK FK (.). (. 6SL7-7TE- 6SL7-7 TE- x. x. 6FX7-7S-... 6FX7-7S-... FK FK (.).7 (7. 6SL7-7TE- 6SL7-7TE- x. x. 6FX7-7S-... 6FX7-7S-... FK7-7K (.) 6SL7-7TE- x. 6FX7-7S-... FK7-7K (. 6SL7-7TE- x. 6FX7-7S-... Cooling: Internal air cooling External air cooling Motor Module: Single Motor Module ouble Motor Module Type of cable: MOTION-CONNECT MOTION-CONNECT Without brake cores With brake cores C For length code as well as and signal cables, see Connection system MOTION-CONNECT.... ) If the absolute encoder is used, M red is reduced by %. ) These values refer to n = rpm. ) These values refer to n = rpm. ) The carrying capacity of the cables complies EN 6- for installion type C, for continuous duty an ambient. ) With default setting of the pulse frequency. P calc [kw] = M [] x n red P calc [P] = M [Ib f -in] x n red 6
5 Synchronous motors Siemens FK7 Compact/FK7 igh ynamic motors Nural cooling for Power Modules Selection and ordering da Red speed Shaft height Red Stic torque Red torque Red FK7 Compact/igh ynamic synchronous motor Nural cooling Connection to SINMICS V C Number of pole pairs Rotor moment of inertia (out brake) Weight (out brake) n red S P red T= K M T= K M red T= K I red T= K m rpm kw (P) Order No. - kgm ( - lb f -in-s ) kg (lb) 6. (.). (.).6 (.6). (.). (.).6 (.). (.7). (.). (.).6.. FK7-F FK7-7F FK7-F (.).7 (.). (.).7 (.). (6.).7 (.). (.).7 (.. (.).7 (.).6 (.). (.).. FK7-F FK7-7F (.6. (.). (.) 6. (.) 6. (.). (.). (.). (.). (.).6 (.).. FK7-K-7 7 FK7-K (.. (.). (.). (.). (.). (..6 (.). FK7-K (.). (.) Synchronous motor: FK7 Compact FK7 igh ynamic 7 out RIVE-CLiQ interface: Incremental encoder sin/cos V pp S/R bsolute encoder En S/R ) (only for FK7) bsolute encoder En S/R ) (not for FK7) bsolute encoder En S/R ) (only for FK7) bsolute encoder En 6 S/R ) (not for FK7) Multi-pole resolver -pole resolver E S T RIVE-CLiQ interface: ) bit incremental encoder (not for FK7) bit absolute encoder, single-turn + bit multi-turn ) (only for FK7) bit absolute encoder, single-turn + bit multi-turn ) (only for FK7/FK7) 6 bit absolute encoder, single-turn + bit multi-turn ) (only for FK7) bit single-turn absolute encoder + bit multi-turn ) (only for FK7/FK7) bit resolver (not for FK7) bit resolver (not for FK7) F L K V U P Shaft extension: Shaft and flange accuracy: olding brake: out out B egree of protection: IP6 (not for FK7) IP6 and E flange IP67 (not for FK7) IP6 (IP for FK7) and anthracite paint finish IP6 and E flange IP67, anthracite paint finish (not for FK7) IP6 and E flange IP67, anthracite paint finish and metal ring ple on motor (not for FK7) To select the degree of protection and type of construction, see selection guides.
6 Siemens Synchronous motors FK7 Compact/igh ynamic motors Nural cooling for Power Modules Selection and ordering da Motor type (continued) Stic Calculed P calc SINMICS S Power Module Red output ) Booksize form out line filter Power cable complete shield Motor connection (and brake connection) via connector I P calc M for M T= K T= K I red M T= K Power connector Cable crosssection ) Pre-assembled cable kw (P) Order No. Size mm Order No. FK7-F... FK7-7F... FK7-F (.). (.. (.7)... 6SL - SB-U 6SL - SB-U 6SL - SB-U x. x. x. 6FX FX FX FK7-F... FK7-7F (.). (.).. 6SL - SB-U 6SL - SB-U x. x. 6FX FX FK7-K... FK7-K (.). (.).. 6SL - SB-U 6SL - SB-U.. x. x. 6FX--... ) 6FX--... ) FK7-K..... (.7). 6SL - SB-U x. 6FX Cooling: Internal air cooling Motor Module: Single Motor Module Type of cable: MOTION-CONNECT MOTION-CONNECT Without brake cores With brake cores C For length code as well as and signal cables, see Connection system MOTION-CONNECT.... ) If the absolute encoder is used, M red is reduced by %. ) This cable is fitted a connector M7 thread the motor end and brake cores as standard ( x. mm + x. mm ). ) The carrying capacity of the cables complies EN 6- for installion type C, for continuous duty an ambient air temperure of C ( F). ) Motors of shaft height are not available a RIVE-CLiQ interface. The encoder systems are connected via the SMC (Sensor Module Cabinet-Mounted). ) With default setting of the pulse frequency. P calc [kw] = M [] x n red P calc [P] = M [Ib f -in] x n red 6
EC 60 TM 200W 48V. with brushless drive. brushless small & compact maintenance-free Protection IP65. Ordering Data
EC-Servo motors with brushless drive EC 0 TM 200W 48V brushless small & compact maintenance-free Protection IP Ordering Data characteristics permanently energized -phase synchronous motor incremental position
More informationDigital AC Motors MHD
Digital AC Motors MHD090 8-1 8 MHD090 8.1 Technical Data Description Symbol Unit MHD090B-035 Type of cooling Natural Natural Surface Liquid Motor overtemperature 60 K 100 K 60 K/100 K 60 K/100 K Electric
More informationTETRA COMPACT. PreliminarY
TETRA COMPACT PreliminarY TETRA COMPACT HOW TO ORDER A BRUSHLESS SERVOMOTOR TETRA COMPACT 40 SR 0.16 E 01 001 A 00.02 TETRA COMPACT TYPE WAVEFORM RATED STALL TORQUE TETRA COMPACT 40 60 80 SR = sinusoidal
More informationSingle Phase Motors Technical Datasheets
Single Phase Motors Technical Datasheets EN A dynamic, strong and ambitious Group: Orange1 Holding is an international renown Group, one of the most important European manufacturers of single-phase and
More informationTPM(A) Quick Startup Guide SIEMENS SINAMICS S120
Quick Startup Guide TPM(A) 00 110 SIEMENS SINAMICS S120 Version : 1.2 Date : 1 th December 200 File : 091_D012_0.doc Doc.No. : 091-D012-0 Technical changes reserved! Table of Contents TABLE OF CONTENTS...
More informationServomotors Order Catalog. LSP-Servomotors with optional planetary gearbox Stall torque 0.18 to 110 Nm
Servomotors Order Catalog LSP-Servomotors with optional planetary gearbox Stall torque 0.8 to 0 Nm Order Catalogue LSP Servomotors ID no.: 08.8B.-0 Date: 0/07 Subject to technical change without notice.
More informationDimensional drawing face mount flange radial. R = bending radius min. 40 mm. Dimensional drawing face mount flange axial
Incremental Encoder DRS/DRS, face mount flange up to 8,2 Dimensional drawing face mount flange radial Incremental Encoder Connector or cable outlet Protection class up to IP s TTL and HTL Zero-Pulse-Teach
More informationProduct Description. Further highlights. Outstanding features. 4 Bosch Rexroth Corporation Miniature Linear Modules R310A 2418 (2009.
4 Bosch Rexroth orporation Miniature Linear Modules R310A 2418 (2009.05) Product Description Outstanding features Rexroth Miniature Linear Modules are precise, ready-to-install linear motion systems that
More informationSystem Components. Electric Motors.
System Components Electric Motors www.powerjacks.com Contents.1. Electric Motors.1.1. AC Motors.1.. AC Motor Performance 0 rpm ( pole).1.. AC Motor Performance 00 rpm ( pole).1.. AC Motors with Integral
More informationDRS 61: Incremental encoders, number of lines and zero pulse width freely programmable DRS 60: Incremental Encoders with Zero-Pulse-Teach
NEW DRS : Incremental encoders, number of lines and zero pulse width freely programmable DRS : s with Zero-Pulse-Teach Further highlights of this generation of encoders: Simple zero-pulse-teach by pressing
More informationCompendium Screw Jacks
Compendium Screw Jacks Screw Jack Technology Overview of chapters Useful information Project planning Screw jacks Bevel gear boxes Lifting screw protective covers Couplings and connecting shafts Accessories
More informationSingle Phase Motors Technical Datasheets
Single Phase Motors Technical Datasheets EN A dynamic, strong and ambitious Group: Orange1 Holding is an international renown Group, one of the most important European manufacturers of single-phase and
More informationProduct description. Compact Modules. Characteristic features. Further highlights
4 Compact Modules Product description Characteristic features Five fine-tuned sizes based on a compact precision aluminum profile with two integrated pre-tensioned ball rail systems Identical external
More informationElectroMechanical Cylinder LEMC
www.lmotion.ru lmotionmail@ya.ru.: (9)9160 ElectroMechanical Cylinder LEMC THE POWER OF KNOWLEDGE ENGINEERING www.lmotion.ru lmotionmail@ya.ru.: (9)9160 ElectroMechanical Cylinder LEMC enefits High efficiency
More informationElectroMechanical Cylinder LEMC
ElectroMechanical Cylinder EMC ElectroMechanical Cylinder EMC enefits High eficiency ong service life from use of SKF planetary roller screw Compact and robust structural design Modular concept with multiple
More informationROTRONICS OPERATING PRINCIPLE. ROTRONICS, specialists in engine test beds, offers a range of industrial Eddy current dynamometers.
Eddy Current Dyno Frein à courant de Foucault Water cooled Eddy current dynamometer A range of products rated from 5 to 3200 kw. 1,2,3 or 4 rotor technology. Full Digital control panel. Extended safeties
More informationMulti-Speed Three-Phase Induction Motors
Multi-Speed Three-Phase Induction Motors Including Motors for Fan Applications Product Catalogue Multi-Speed Three-Phase Induction Motors Certificates Cantoni Motor SA ISO 0 KEMA Since September 0, 999
More informationZF Maschinenantriebe GmbH Industrial Drives. Planetary gearboxes Economy Series for Servomotors
ZF Maschinenantriebe GmbH Industrial rives Planetary gearboxes Economy Series for Servomotors 2 ZF-uoplan 2K Two-speed Gearboxes ZF-Ecolift Elevator Gearboxes ZF-Servoplan G ompact Gearbox ZF-Tiratron
More informationMotion Solutions that Change the Game. HMP10 Servo Motors
Motion Solutions that hange the Game HMP0 Servo Motors Introduction The HeiMotion Premium series of brushless A servo motors are engineered to meet the most demanding application requirements. Five frame
More informationE6C-N. Ideal for Out-of-step Detection of Stepping Motors and Position Control of Rotors and Unloaders
Multi-turn High-precision Encoder Ideal for Out-of-step Detection of Stepping Motors and Position Control of Rotors and Unloaders Reset function for easy origin alignment when built-into equipment. Multi-turn
More informationuser's manual nx frequency converters resolver option board opt-bc
user's manual nx frequency converters resolver option board opt-bc INDEX Document code: ud01039d Date: 18.2.2011 1. Resolver option board OPT-BC... 3 1.1 Resolver basics... 3 1.2 Resolver board features...
More informationGeneral specification
SC hree Phase IC ow Voltage Product Catalogue iti o n hree phase sychronous rd d SC Series Motors nhanced performance cast iron units eneral specification Introduction Specification SC motors are suitable
More informationEngineering Data AC Servo Actuators LynxDrive
Engineering Data AC Servo Actuators LynxDrive More information on our servo products can be found HERE! Contact us today! Contents 1. General... 4 1.1 Description of Safety Alert Symbols...5 1.2 Disclaimer
More informationFront flange FLV. Max. [knm/stroke]
SDN 45 Safety shock absorbers SDN are a low cost alternative to industrial shock absorbers appropriate to customers requirements. Typical applications: cranes, storage and retrieval unit for highbay warehouse,
More informationEngineering Data AC Servo Actuators FHA-C
Engineering Data AC Servo Actuators FHA-C QUICKLINK www.harmonicdrive.de/12 Contents 1. General... 3 1.1 Description of Safety Alert Symbols...4 1.2 Disclaimer and Copyright...4 2. Safety and Installation
More informationAbsolute encoders multiturn
elektronischer electronic multiturn, Multiturn, magnetic magnetisch Sendix M66 / M68 (shaft / hollow shaft) The Sendix M6 with Energy Harvesting Technology is an electronic multiturn encoder in miniature
More informationHPG xxx 030 C1 C2 C3. High performance angle gearboxes. Output. Input. Drawings. C with option motor flange. View x. Centering View y.
HPG 030 1 2 3 Input Output 1 View M6 ( deep) 0 Ø4 H (2.2 deep) 18.0 M6 ( deep) 0 2 3 M6 ( deep) 2 13.0 4 2.0 18.0 24.0 M Ø12 k6 6 M6 ( deep) M6 ( deep) 3 Eample HPG 030 2 with option motor flange 0 M6
More informationLexium integrated drives
Presentation GBX planetary gearbox Presentation In many cases the axis controller requires the use of a planetary gearbox for adjustment of speed of rotation and torque; the accuracy required by the application
More informationTwinCAT Motion Designer Report. Project Name: TwinCAT Motion Designer Project1. Customer. Application Engineer. Project Description
TwinCAT Motion Designer Report Project Name: Customer Company: Name: Department: Street: City: Country: Application Engineer Company: Name: Department: Street: City: Country: Project Description Exclusion
More informationR310EN 2403 ( ) The Drive & Control Company
Feed Modules VKK R310EN 2403 (2008.09) The Drive & Control Company Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts Ball Screw Drives Linear Motion
More informationEngineering Data AC Servo Actuators LynxDrive
Engineering Data AC Servo Actuators LynxDrive More information on our servo products can be found HERE! Contact us today! Contents 1. General... 3 1.1 Description of Safety Alert Symbols...4 1.2 Disclaimer
More informationEngineering Data CanisDrive
Engineering Data CanisDrive More information on our servo products can be found HERE! Contact us today! Content 1. General... 5 1.1 Description of Safety Alert Symbols...6 1.2 Disclaimer and Copyright...6
More informationPrecision Ball Screw/Spline
58-2E Models BNS-A, BNS, NS-A and NS Seal Outer ring Shim plate Seal Spline nut Seal Collar Shim plate Seal End cap Ball Outer ring Ball screw nut Outer ring Ball Retainer Retainer Outer ring Point of
More informationI/IN (D) Kriva momenta i struje Torque and current curves Moment und Strom Kurven. - a / r
I/IN (D) 4.5 M/M N Kriva momenta i struje Torque and current curves Moment und Strom Kurven 1459-69V,D/4 5kW/ 5Hz - a / r I/I N 9. I/I N (D) 4. 8. 3.5 7. 3. 6. 2.5 5. 2. 4. M/M N (D) 1.5 3. I/I N (Y) 1.
More informationLinear guide drives. Synchronous shafts The use of synchronous shafts enables several linear axes to be operated with one drive.
Linear guide drives Drive concept The linear guides are driven via the hollow shaft in the drive head. The drive head is used to directly install a motor or alternatively (in connection with a center shaft)
More informationAccurate Determination of the Thermal Model Time Constant for the Electrical Servomotors
Transilvania University of Brasov, Romania 13 th INTERNATIONAL CONFERENCE STANDARDIZATION, PROTYPES AND QUALITY: A MEANS OF BALKAN COUNTRIES COLLABORATION Brasov, Romania, November 3-4, 2016 Accurate Determination
More informationUNI EN ISO 9001:2008 UNI EN ISO 14001:2004 BS OHSAS 18001:2007 EC DIRECTIVE 2014/34/EU (ATEX) CERTIFIED MANAGEMENT SYSTEM
EN ISM-BSM CERTIFIED Technology Made in Italy Since 1955 the Varvel Group has been making speed reducers and variators for light industry applications. Reliable partner in power transmission equipment
More informationEngineering Data AC Servo Actuators FHA-C Mini
Engineering Data AC Servo Actuators FHA-C Mini More information on our servo products can be found HERE! Contact us today! Contents 1. General... 3 1.1 Description of Safety Alert Symbols...4 1. Disclaimer
More informationSKA DDL IRON CORE LINEAR MOTORS. Direct Drive Technology
Direct Drive Technology SKA DDL IRON CORE LINEAR MOTORS Copyright 2007 Motor Power Company. All rights reserved. Contents are subjected to change without any notice. Edition 05/12 SKA DDL LINEAR MOTOR
More informationLoad Washers. Force. for Forces of 7, kn. F z. Type 9001A A 9081B, 9091B
Force Load Washers for Forces of 7,5... 1 200 kn Type 9001A... 9071A 9081B, 9091B 1-component force sensor for measuring dynamic and quasistatic forces in z direction. F z Calibrated measuring range 100
More informationAir distribution systems. Adjustable radial outlet RA-V...
Air distribution systems Adjustable radial outlet RA-V... DS E 0.2013 Construction design Preliminary remarks KRANTZ KOMPONENTEN has developed its wellknown, successful radial outlet into an adjustable
More informationX-LSM-E Series: Miniature motorized linear stages with built-in motor encoder and controllers
X-LSM-E Series: Miniature motorized linear stages with built-in motor encoder and controllers 25, 50, 100, 150, 200 mm travel 10 kg load capacity Up to 104 mm/s speed and up to 55 N thrust Built-in controller;
More informationLINE TECH Linear Modules. Ready to built-in linear modules with drive
Ready to built-in linear modules with drive Anodized profile, produced in extrusion molding method Linear rail guiding system (LM3 LM5) Actuation by ball screw, high-helix lead _ screw or toothed belt
More informationStandard specifications ZX165UFE02001
Standard specifications ZXUF000 May, 0 KAWASAKI HAVY INDUSTRIS, LTD. ROBOT DIVISION Materials and specifications are subject to change without notice. Specification : (Arm): (Controller): 00-DA 0-00DA
More informationEngineering Data AC Servo Actuators CHA-C
Engineering Data AC Servo Actuators CHA-C More information on our servo products can be found HERE! Contact us today! Contents 1. General... 4 1.1 Description of Safety Alert Symbols...5 1.2 Disclaimer
More informationAIR PREPARATION. ELECTRONICALLY CONTROLLED PRESSURE REGULATING VALVE (PROPORTIONAL PRESSURE REGULATING VALVE) SERIES control
AIR PREPARATION ELECTRONICALLY CONTROLLED PRESSRE REGLATING ALE (PROPORTIONAL PRESSRE REGLATING ALE) SERIES control Description Abb. Port size Recommended Type Data Sheet No. flow (l/min)* airfit tecno
More informationDrive Units with Ball Screw Drives R310EN 3304 ( ) The Drive & Control Company
Drive Units with Ball Screw Drives R310EN 3304 (2007.05) The Drive & Control Company Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts Precision Ball
More informationMECHATRONICS ENGINEERING TECHNOLOGY. Modeling a Servo Motor System
Modeling a Servo Motor System Definitions Motor: A device that receives a continuous (Analog) signal and operates continuously in time. Digital Controller: Discretizes the amplitude of the signal and also
More informationRotary modules.
Rotary modules www.comoso.com www.comoso.com Rotary modules ROTARY MODULES Series Size Page Rotary modules RM swivel unit 156 RM 08 160 RM 10 162 RM 12 164 RM 15 168 RM 21 172 RM rotor 176 RM 50 180 RM
More informationRail Guide Modular Linear Actuators DSM
Roller Guide Modular Linear Actuators DLM, DLVM Rail Guide Modular Linear Actuators DSM nookindustries.com toll-free (800) 32-7800 25 DLM 20, 60, 200 Linear Motor Drive Specifications Function: This unit
More informationAC Synchronous Motors
AC Synchronous Motors A C S Y N C H R O N O U S M O T O R S AC Synchronous Motors Kollmorgen AC synchronous motors are high pole count motors that naturally turn at slower speeds (72 or 60 rpm). at 72
More informationYUNSHENG PERMANENT MAGNET SYNCHRONOUS MOTOR. YUNSHENG GROUP Ningbo YunSheng Co.,Ltd. Servo Control Division
YUNSHNG PRMANNT MAGNT SYNCHRONOUS MOTOR YUNSHNG GROUP Ningbo YunSheng Co.,Ltd. Servo Control Division Add:No. 1 Yangfan Road, National Hi-Tech Zone,Ningbo, China Tel:0-21 26 261 Fax:0-269 mail:ys-sem@ysweb.com
More informationSECTION 1 - WHAT IS A BTU METER? BTU's = Flow x ΔT Any ISTEC BTU Meter System consists of the following main components:
SECTION 1 - WHAT IS A BTU METER? ISTEC BTU Meters measure energy usage by multiplying flow rate and temperature difference. As the water (or other liquid) passes through these lines, the multi-wing turbine
More informationLO-COG DC Gearmotors. Series GM8000. Series GM9000. Series GM BULLETIN LCG Series GM8000, GM9000, GM Power Your Ideas
BULLETIN LCG Series GM8, GM9, GM149 LO-COG DC Gearmotors Pittman brand LO-COG brush-commutated DC gearmotors offer smooth, quiet operation and long life. LO-COG gearmotors feature sintered steel spur gears
More informationMotor-CAD combined electromagnetic and thermal model (January 2015)
Motor-CAD combined electromagnetic and thermal model (January 2015) Description The Motor-CAD allows the machine performance, losses and temperatures to be calculated for a BPM machine. In this tutorial
More informationDoubly salient reluctance machine or, as it is also called, switched reluctance machine. [Pyrhönen et al 2008]
Doubly salient reluctance machine or, as it is also called, switched reluctance machine [Pyrhönen et al 2008] Pros and contras of a switched reluctance machine Advantages Simple robust rotor with a small
More informationINDUCTION MOTOR MODEL AND PARAMETERS
APPENDIX C INDUCTION MOTOR MODEL AND PARAMETERS C.1 Dynamic Model of the Induction Motor in Stationary Reference Frame A three phase induction machine can be represented by an equivalent two phase machine
More informationInternational Journal of Advance Engineering and Research Development SIMULATION OF FIELD ORIENTED CONTROL OF PERMANENT MAGNET SYNCHRONOUS MOTOR
Scientific Journal of Impact Factor(SJIF): 3.134 e-issn(o): 2348-4470 p-issn(p): 2348-6406 International Journal of Advance Engineering and Research Development Volume 2,Issue 4, April -2015 SIMULATION
More informationNR ROTARY RING TABLE: FLEXIBLE IN EVERY RESPECT
NR FREELY PROGRAMMABLE ROTARY TABLES NR ROTARY RING TABLE All NR rings allow customer-specific drive motors to be connected NR ROTARY RING TABLE: FLEXIBLE IN EVERY RESPECT WHEN IT S GOT TO BE EXACT We
More informationVariable Displacement Plug-In Motor A6VE. Series 6, for open and closed circuits Axial tapered piston, bent axis design
rueninghaus Hydromatik Series 6, for open and closed circuits xial tapered piston, bent axis design Size 28...20 Nom. pressure up to 400 bar Peak pressure up to 40 bar RE 9606/0.97 RE 9606/0.97 replaces
More informationTechnical Data Sheet for AvK-Alternators
Technical Data Sheet for AvK-Alternators FM 7.3-5 Date: 2/1/14 Customer: GENERIC DATASHEET only Project No.: AvK Reference: dsg74l1_6_6_69_a48m965 Object data: Site: Prime Mover: Application: Stationary
More informationTechnical Data Sheet for AvK-Alternators
Technical Data Sheet for AvK-Alternators FM 7.3-5 Date: 3/1/13 Customer: GENERIC DATASHEET only Project No.: AvK Reference: dig12i_4_6_416 Object data: Site: Prime Mover: Application: Stationary Power
More informationManufacturing Equipment Control
QUESTION 1 An electric drive spindle has the following parameters: J m = 2 1 3 kg m 2, R a = 8 Ω, K t =.5 N m/a, K v =.5 V/(rad/s), K a = 2, J s = 4 1 2 kg m 2, and K s =.3. Ignore electrical dynamics
More informationSKA COMPACT. ALL IN ONE Linear Axes
SKA COMPACT ALL IN ONE Linear Axes Cutting-edge all in one linear axis based on iron core technology. A range of three sizes with aluminium carrying structure. The power components, moving coil and magnetic
More informationChapter 3: Fundamentals of Mechanics and Heat. 1/11/00 Electromechanical Dynamics 1
Chapter 3: Fundamentals of Mechanics and Heat 1/11/00 Electromechanical Dynamics 1 Force Linear acceleration of an object is proportional to the applied force: F = m a x(t) F = force acting on an object
More informationDGS 20, DGS 25, DGS 21/22 and DGS 35/34: Incremental Encoders for rough environmental conditions
,, 1/ and 3/34: Incremental Encoders for rough environmental conditions elect your individual encoder! Possible product variations: 1/4 and 3/8 in solid shafts with square flange or servo mount, through
More informationAPEX DYNAMICS, INC. Staianless
APEX DYNAMICS, INC. HIGH PRECISION PLANETARY GEARBOXES AE / AER Series Staianless High precision high speed planetary gearboxes AE / AER series Apex Dynamics, Inc. is the world s most productive manufacturer
More informationCHAPTER 6 FRICTION AND WEAR ANALYSIS FOR BUSHING
CHAPTER 6 FRICTION AND WEAR ANALYSIS FOR BUSHING 6.1 TEST RIG SETUP FOR THE FRICTION AND WEAR ANALYSIS Knowing the frictional coefficient is important for the determination of wear loss and power loss
More informationMatlab Sheet 2. Arrays
Matlab Sheet 2 Arrays 1. a. Create the vector x having 50 logarithmically spaced values starting at 10 and ending at 1000. b. Create the vector x having 20 logarithmically spaced values starting at 10
More informationThird harmonic current injection into highly saturated multi-phase machines
ARCHIVES OF ELECTRICAL ENGINEERING VOL. 66(1), pp. 179-187 (017) DOI 10.1515/aee-017-001 Third harmonic current injection into highly saturated multi-phase machines FELIX KLUTE, TORBEN JONSKY Ostermeyerstraße
More informationGurley Model A58 Absolute Encoder
Gurley Model Absolute Encoder Motion Type: Rotary Usage Grade: Industrial Output: Absolute Resolution: - Bit The model encoder is a single-turn absolute rotary encoder with opto-electronic technology This
More information6) Motors and Encoders
6) Motors and Encoders Electric motors are by far the most common component to supply mechanical input to a linear motion system. Stepper motors and servo motors are the popular choices in linear motion
More informationElectric Vehicle Performance Power and Efficiency
Electric Vehicle Performance Power and Efficiency 1 Assignment a) Examine measurement guide and electric vehicle (EV) arrangement. b) Drive the route according to teacher s instruction and download measured
More informationDBS315 1-phase SIDE CHANNEL BLOWERS
DBS15/ 1-phase DESCRIPTION Dutair blowers for pressure and vacuum are compact machines consisting of an electric motor with a built-on pump housing. The rotational speed of the impeller creates a high
More informationMSBCCL Series Asynchronous Three-Phase Brake Motors With Squirrel Cage Rotor Direct Current Brake
NEMA MOTOR GOST MOTOR IEC MOTOR MSBCCL Series Asynchronous Three-Phase Motors ith Squirrel Cage Rotor Direct Current PUMP D.C. MOTOR GENERATOR MSBCCL series-enclosed construction externally ventilated-sizes
More informationX-LSM-SV1 Series: Low vacuum miniature motorized linear stages with built-in controllers
X-LSM-SV1 Series: Low vacuum miniature motorized linear stages with built-in controllers Vacuum compatible to 10-3 Torr 25, 50, 100, 150, 200 mm travel 10 kg load capacity Up to 100 mm/s speed and up to
More informationBall Reverser. Ball Reverser Actuator. FLENNOR Power Transmission Products. Patented
Ball Reverser FLENNOR Power Transmission Products Ball Reverser Actuator Patented Ball Reverser Principle General Information NORCO'S Ball Reverser Actuator is a unique actuator which provides automatic
More informationDesign and analysis of Axial Flux Permanent Magnet Generator for Direct-Driven Wind Turbines
Design and analysis of Axial Flux Permanent Magnet Generator for Direct-Driven Wind Turbines Sung-An Kim, Jian Li, Da-Woon Choi, Yun-Hyun Cho Dep. of Electrical Engineering 37, Nakdongdae-ro, 55beon-gil,
More informationECE 5670/6670 Lab 8. Torque Curves of Induction Motors. Objectives
ECE 5670/6670 Lab 8 Torque Curves of Induction Motors Objectives The objective of the lab is to measure the torque curves of induction motors. Acceleration experiments are used to reconstruct approximately
More informationCHAPTER 5 SIMULATION AND TEST SETUP FOR FAULT ANALYSIS
47 CHAPTER 5 SIMULATION AND TEST SETUP FOR FAULT ANALYSIS 5.1 INTRODUCTION This chapter describes the simulation model and experimental set up used for the fault analysis. For the simulation set up, the
More informationThe perfect Torque Limiting Clutch for
The perfect Torque Limiting Clutch for Machine Tools Packaging Machinery Printing and Paper Machinery Automated Systems Power Transmission compact, backlash-free torque limiting clutch Immediate disengagement
More informationBrushless DC Variable Speed Compressor Technical Data Sheet
R134a V DC VARIABLE SPEED Brushless DC Variable Speed Compressor Technical Data Sheet General Information Compressor Part Number (Stationary) CASCADE0005 (140 per pallet) Compressor Part Number (Mobile)
More informationOur classic for extreme parallel offset: Standard S series. The Schmidt-Kupplung compensates variable parallel Symbiosis of performance, com-
Schmidt-Kupplung Power Plus SK_PP_/0 The Schmidt-Kupplung series Schmidt-Kupplung Our classic for extreme parallel offset: Standard S series The Schmidt-Kupplung compensates variable parallel Symbiosis
More informationEVOTRON WET ROTOR ELECTRONIC CIRCULATORS TECHNICAL DATA APPLICATIONS ADVANTAGES
TECNICAL DATA EVOTRON Operating range: from, -, m3/h with head of up to metres. Pumped liquid temperature range: from - C to + C. Working pressure: bar ( kpa). Protection class: IP X. Insulation class:
More informationADD:2F,Building B,Jintai Industrial Park,Hangcheng. Website:
ADD:F,Building B,Jintai Industrial Park,Hangcheng Website:www.hubridservo.com 01 0 Universal Servo G Series Servo Drive Universal Servo G Series Servo Drive Technical Indexes Power Range: 50W~.0KW Input
More informationStudy Effect of Pads shapes on Temperature Distribution for Disc Brake Contact Surface
International Journal of Engineering Research and Development e-issn: 2278-067X, p-issn: 2278-800X, www.ijerd.com Volume 8, Issue 9 (September 2013), PP. 62-67 Study Effect of Pads shapes on Temperature
More informationEXPERIMENTAL INVESTIGATION OF THE EFFECTS OF TORSIONAL EXCITATION OF VARIABLE INERTIA EFFECTS IN A MULTI-CYLINDER RECIPROCATING ENGINE
International Journal of Mechanical Engineering and Technology (IJMET) Volume 6, Issue 8, Aug 2015, pp. 59-69, Article ID: IJMET_06_08_006 Available online at http://www.iaeme.com/ijmet/issues.asp?jtypeijmet&vtype=6&itype=8
More informationBrushless DC Variable Speed Compressor Technical Data Sheet
R134a V DC VARIABLE SPEED Brushless DC Variable Speed Compressor Technical Data Sheet General Information Compressor Part Number (Stationary) CASCADE0006 (140 per pallet) Compressor Part Number (Mobile)
More informationSlimLine Sensors (SLS)
Force SlimLine Sensors (SLS) Measurement of Dynamic and Quasistatic Forces, 0 3 kn up to 0 80 kn Quartz sensor series with extremely flat design for measuring dynamic and quasistatic forces. High resolution,
More informationX-LRQ-SV2 Series: High vacuum motorized linear stages with built-in controllers
X-LRQ-SV2 Series: High vacuum motorized linear stages with built-in controllers Vacuum compatible to 10-6 torr 75, 150, 300, 450, 600 mm travel 100 kg load capacity Up to 205 mm/s speed and up to 100 N
More informationPerformance. Standards. Technical data
ilos Loadbreak disconnectors for INrail and wall mounting ilos up to ilos 2 up to los up to Order codes pplications pprovals / Marking ddon devices Performance INrail type and wall mounting type Main disconnector,
More informationDRUM MOTOR DM 0080 DRUM MOTOR DM Technical data. Design variants and accessories
Practice-iented, scalable and thought out in detail: The new drum mot makes it easy to ild a completely indidual convey system and is dimensioned f the higher requirements f permissible belt tension from
More informationAN EXPERIMENTAL WEB TENSION CONTROL SYSTEM: SYSTEM SET-UP
Advances in Production Engineering & Management 2 (2007) 4, 185-193 ISSN 1854-6250 Professional paper AN EXPERIMENTAL WEB TENSION CONTROL SYSTEM: SYSTEM SET-UP Giannoccaro, N.I. * ; Oishi, K. ** & Sakamoto,
More informationTechnical Description
Overview It is being digitalized and accelerated with builtin micro processor because of development of computer. It is widely used in industrial NC, ROBOT, servo motors and OA equipment in order to detect
More informationSingle cam type. Double cam type. Grip force N. Type Model/size Stroke Screw type straight style. Screw type tee style
Type Model/size Stroke -SS-0-N. -SS-0-N. Single cam type -SS- 7. -SS-. -SS-4. -SD-0 Double cam type -SD- -SD-4. Screw type straight style Screw type tee style -FS- -FT- -FS- -FT- 0.9 1. 1.. 1. 4 Grip forcen
More informationMotor Specifications and Ratings 200V MDMA
Motor Specifications and Ratings 2V 1.kW to 1.kW Low inertia, Medium Capacity AC2V Motor model Applicable driver Model No. A4 A4F Frame symbol 121 12S1 121 12S1 MDDDT33 MDDDT4 MDDDT33F MDDDT4F MDDDT33
More informationSingle point load cells
SP4M Single point load cells Special features Maximum capacities: kg 200 kg Aluminum High ratio of minimum verification Offcenter load compensation Shielded connection cable Explosion protection and other
More informationcompact ejector, Series ECS with release valve with silencer with non-return valve, With filter vacuum switch: electronic 1x PNP and 1x analog
with release valve with silencer with non-return valve, With filter vacuum switch: electronic x PNP and x analog Ambient temperature min./max. +0 C / +0 C Medium temperature min./max. +0 C / + C Working
More informationThese two values are determined by the application (see calculation example on pages 52-53).
Tension brake sizing Two important parameters are used in brake selecting: Max. torque requirement Max. thermal power to be dissipated These two values are determined by the application (see calculation
More informationAutomatic Control Systems. -Lecture Note 15-
-Lecture Note 15- Modeling of Physical Systems 5 1/52 AC Motors AC Motors Classification i) Induction Motor (Asynchronous Motor) ii) Synchronous Motor 2/52 Advantages of AC Motors i) Cost-effective ii)
More information