X42182 X Features. Applications. Z-Power series is designed for high current operation and high flux output applications.

Transcription

1 X42182 ZPower series is designed for high current operation and high flux output applications. ZPower LED's thermal management perform exceeds other power LED solutions. It incorporates state of the art SMD design and Thermal emission material. Z Power LED is ideal light sources for general illumination applications, custom designed solutions, automotive large LCD backlights X42182 Features Super high flux output and high luminance Designed for high current operation Low thermal resistance SMT solderability Lead free product RoHS compliant Applications Mobile phone flash Automotive interior / Exterior lighting Automotive signal lighting Automotive forward lighting Torch Architectural lighting LCD TV / Monitor backlight Projector light source Traffic signals Task lighting Decorative / Pathway lighting Remote / Solar powered lighting Household appliances *The appearance and specifications of the product may be changed for improvement without notice. 1

2 Characteristics for ZPower LED 4. Natural White (S42182) 41 ElectroOptical characteristics at I F =35mA, T A =25 Min Typ Max Luminous Flux [1] [2] Ф V 72 lm Correlated Color Temperature [3] CCT 4 K CRI R a 93 Forward Voltage [4] V F V View Angle 2Θ 1/2 124 deg. Thermal resistance [5] Rθ JB 8.8 /W Thermal resistance [6] Rθ JC 7.2 /W 42 Absolute Maximum Ratings Forward Current I F 8 ma Power Dissipation P d 3.2 W Junction Temperature T j 145 Operating Temperature T opr 4 ~ +85 Storage Temperature T stg 4 ~ +1 ESD Sensitivity [8] ±1,V HBM *Notes : [1] SSC maintains a tolerance of ±1% on flux and power measurements. [2] Ф V is the total luminous flux output as measured with an integrated sphere. [3] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram. CCT ±5% tester tolerance. [4] A tolerance of ±6V on forward voltage measurements [5], [6] Rθ JB is measured with a SSC metal core pcb.(25 T J 11 ) Rθ JC is measured with only emitter. (25 T J 11 ) Break voltage of Metal PCB is 6.5kVAC. [7] It is included the zener chip to protect the product from ESD. Caution 1. Please do not drive at rated current more than 5 sec. without proper heat sink 8

3 Characteristics for ZPower LED 6. Blue (B42182) 61 ElectroOptical characteristics at I F =35mA, T A =25 Min Typ Max Luminous Flux [1] [2] Ф V 22 lm Dominant Wavelength [3] λ D nm Forward Voltage [4] V F V View Angle 2Θ 1/2 13 deg. Thermal resistance [5] Rθ JB 8.8 /W Thermal resistance [6] Rθ JC 7.2 /W 62 Absolute Maximum Ratings Forward Current I F 1 ma Power Dissipation P d 4 W Junction Temperature T j 145 Operating Temperature T opr 4 ~ +85 Storage Temperature T stg 4 ~ +1 ESD Sensitivity [7] ±1,V HBM *Notes : [1] SSC maintains a tolerance of ±1% on flux and power measurements. [2] Ф V is the total luminous flux output as measured with an integrated sphere. [3] Dominant wavelength is derived from the CIE 1931 Chromaticity diagram. A tolerance of ±.5nm for dominant wavelength [4] A tolerance of ±6V on forward voltage measurements [5], [6] Rθ JB is measured with a SSC metal core pcb.(25 T J 11 ) Rθ JC is measured with only emitter..(25 T J 11 ) Break voltage of Metal PCB is 6.5kVAC [7] It is included the zener chip to protect the product from ESD. Caution 1. Please do not drive at rated current more than 5 sec. without proper heat sink 2. Blue power light sources represented here are IEC825 Class 2 for eye safety 1

4 Characteristics for ZPower LED 8. Green (G42182) 81 ElectroOptical characteristics at I F =35mA, T A =25 Min Typ Max Luminous Flux [1] [2] Ф V 7 lm Dominant Wavelength [3] λ D nm Forward Voltage [4] V F V View Angle 2Θ 1/2 13 deg. Thermal resistance [5] Rθ JB 9.5 /W Thermal resistance [6] Rθ JC 8. /W 82 Absolute Maximum Ratings Forward Current I F 1 ma Power Dissipation P d 4 W Junction Temperature T j 145 Operating Temperature T opr 4 ~ +85 Storage Temperature T stg 4 ~ +1 ESD Sensitivity [7] ±1,V HBM *Notes : [1] SSC maintains a tolerance of ±1% on flux and power measurements. [2] Ф V is the total luminous flux output as measured with an integrated sphere. [3] Dominant wavelength is derived from the CIE 1931 Chromaticity diagram. A tolerance of ±.5nm for dominant wavelength [4] A tolerance of ±6V on forward voltage measurements [5], [6] Rθ JB is measured with a SSC metal core pcb.(25 T J 11 ) Rθ JC is measured with only emitter..(25 T J 11 ) Break voltage of Metal PCB is 6.5kVAC [7] It is included the zener chip to protect the product from ESD. Caution 1. Please do not drive at rated current more than 5 sec. without proper heat sin 12

5 Characteristics for ZPower LED 9. Red (R42182) 91 ElectroOptical characteristics at I F =35mA, T A =25 Min Typ Max Luminous Flux [1] [2] Ф V 48 lm Dominant Wavelength [3] λ D nm Forward Voltage [4] V F V View Angle 2Θ 1/2 13 deg. Thermal resistance [5] Rθ JB 9 /W Thermal resistance [6] Rθ JC 7.8 /W 92 Absolute Maximum Ratings Forward Current I F 8 ma Power Dissipation P d 2.4 W Junction Temperature T j 145 Operating Temperature T opr 4 ~ +85 Storage Temperature T stg 4 ~ +1 ESD Sensitivity [7] ±1,V HBM *Notes : [1] SSC maintains a tolerance of ±1% on flux and power measurements. [2] Ф V is the total luminous flux output as measured with an integrated sphere. [3] Dominant wavelength is derived from the CIE 1931 Chromaticity diagram. A tolerance of ±.5nm for dominant wavelength [4] A tolerance of ±6V on forward voltage measurements [5], [6] Rθ JB is measured with a SSC metal core pcb.(25 T J 11 ) Rθ JC is measured with only emitter..(25 T J 11 ) Break voltage of Metal PCB is 6.5kVAC [7] It is included the zener chip to protect the product from ESD. Caution 1. Please do not drive at rated current more than 5 sec. without proper heat sink 13

6 Characteristics for ZPower LED 1. Amber (A42182) 11 ElectroOptical characteristics at I F =35mA, T A =25 Min Typ Max Luminous Flux [1] [2] Ф V 48 lm Dominant Wavelength [3] λ D nm Forward Voltage [4] V F V View Angle 2Θ 1/2 13 deg. Thermal resistance [5] Rθ JB 9 /W Thermal resistance [6] Rθ JC 7.8 /W 12 Absolute Maximum Ratings Forward Current I F 8 ma Power Dissipation P d 2.4 W Junction Temperature T j 145 Operating Temperature T opr 4 ~ +85 Storage Temperature T stg 4 ~ +1 ESD Sensitivity [7] ±1,V HBM *Notes : [1] SSC maintains a tolerance of ±1% on flux and power measurements. [2] Ф V is the total luminous flux output as measured with an integrated sphere. [3] Dominant wavelength is derived from the CIE 1931 Chromaticity diagram. A tolerance of ±.5nm for dominant wavelength [4] A tolerance of ±6V on forward voltage measurements [5], [6] Rθ JB is measured with a SSC metal core pcb.(25 T J 11 ) Rθ JC is measured with only emitter..(25 T J 11 ) Break voltage of Metal PCB is 6.5kVAC [7] It is included the zener chip to protect the product from ESD. Caution 1. Please do not drive at rated current more than 5 sec. without proper heat sink 14

7 Color Spectrum, T A =25 1. Pure White Relative Spectral Power Distribution Standard eye response curve W avelen g th (n m ) 2. Warm White (N42182) Relative Spectral Power Wavelength 15

8 Color Spectrum, T A =25 3. Warm White (N42182H) Relative Spectral Power W avelength 4. Natural White (S42182) Relative Spectral Power W avelength 16

9 Color Spectrum, T A =25 5. Natural White (S42182H) Relative Spectral Power W avelength 5. Red, Amber, Green, Blue(Royal Blue) Relative Spectral Power Distribution W avelen g th (n m ) 17

10 Junction Temperature Characteristics 1. Relative Light Output vs. Junction Temperature at I F =35mA Relative Light Output(%) Natural White, Warm White Pure White Blue(Royal Blue) Green Junction Temperature( O C) 1 Relative Light Output [%] Red Amber Junction Temperature [ o C] 18

11 Forward Voltage Shift[V] Junction Temperature Characteristics 2. Forward Voltage Shift vs. Junction Temperature at I F =35mA Pure White, Warm White, Natural White, Blue(Royal Blue) Red Amber Green Junction Temperature [ O C] 3. Wavelength Shift vs Junction Temperature at I F =35mA 12 Dominant Wavelength Shift[nm] Red Green Blue(Royal Blue) Amber Junction Temperature[ o C] 19

12 Forward Current Characteristics 1. Forward Voltage vs. Forward Current, T A =25 ºc Average Forward Current [ma] Blue(Royal Blue), Green, Pure White Warm White, Natural White Forward Voltage [V] 8 Red, Amber Average Forward Current [ma] Forward Voltage [V] 2

13 Forward Current Characteristics 2. Forward Current vs. Normalized Relative Luminous Flux, T A =25 ºc Relative Lumious Flux(a.U) Blue(Royal Blue), Green, Pure White Warm White, Natural White Forward Current [ma] 2.5 Red, Amber Relative Lumious Flux(a.U) Forward Current [ma] 21

14 Forward Current Characteristics 3. Forward Current vs Wavelength Shift, T A =25 ºc Dominant Wavelength Shift[nm] Red Green Blue(Royal Blue) Amber Forward current(ma) 22

15 Relative luminous flux 1. Pure White Typical Dome Type Radiation pattern Angle(deg.) 9 2. Warm White, Natural White 3.8 Relative Luminous Flux Angle(deg.) 9 26