Grade XI. Physics Exam Preparation Booklet. Chapter-wise Important Questions. #GrowWithGreen

Size: px
Start display at page:

Download "Grade XI. Physics Exam Preparation Booklet. Chapter-wise Important Questions. #GrowWithGreen"

Transcription

1 Grade XI Physics Exam Preparation Booklet Chapter-wise Important Questions #GrowWithGreen

2 Units and Measurements Q1. After reading the physics book, Anamika recalled and noted down the expression for the speed of efflux of a liquid of density ρ as (3 marks) However, he forgot to write ρ in the relation. Where should Anamika put the missing ρ? Q2. Three capacitors C 1, C 2 and C 3 are connected in series and its equivalent capacitance is C eq. If C eq = 0.15 ± 0.02 µf C 1 = 0.35 ± 0.07 µf and C 3 = 0.78 ± 0.13 µf Find capacitance of C 2 with error limits. (3 marks) Motion in a Straight Line Q1. The acceleration-time graph of a car is represented in the given figure. (2 marks) Write the time intervals for which the car has moved with (i) constant acceleration (ii) zero acceleration Q2. A body starts from rest with varying acceleration,. Obtain the change in position of the body. (2 marks) Q3. The minimum distance required by a truck, moving at a speed of 35 km/h, to stop is 40 m. Initially, if the truck was travelling at a speed of 70 km/h, then what would have been the minimum stopping distance? (2 marks) Q4. Derive the equations of motion for uniformly accelerated motion. (3 marks)

3 Motion in a Plane Q1. A particle undergoes uniform circular motion along a radius of 5 cm and with a speed given as v = 2 t t cm/s. Calculate: (a) the tangential acceleration at t = 2 seconds (b) the total acceleration at t = 2 seconds Q2. Find the value of α so that vector. is perpendicular to the vector Q3. A projectile is fired at an inclination so as to have maximum horizontal range. Show that the maximum horizontal range is four time the maximum height attained by the projectile. Q4. A man is walking with a speed 2m/s from east to west. Rain falls vertically with a speed of 10m/s. What is the direction in which he should hold his umbrella? (3 marks) (2 marks) (2 marks) (2 marks) Laws of Motion Q1. A block of mass 5 kg is placed on an adjustable inclined plane. The block just begins to slide down if the angle of inclination is made 60 with the ground. Calculate: (a) the coefficient of static friction (b) the force of static friction Q2. Three blocks of different masses, connected by light and inextensible strings, are pulled by a force F = 20 N as shown below. (3 marks) (5 marks) Calculate: 1. acceleration of each block. 2. tension in each string. Q3. Find the mass of the object in the following arrangement. (3 marks)

4 Q4. Newton s second law of motion is the basic law of motion. Explain (1 mark) Q5. A gun containing a bullet weighs M. The mass of each bullet is m. What will be the recoil velocity of the gun, if the bullet is fired will speed v? Q6. Calculate the value of the banking angle of a curved road of radius 350 m if it has a top speed of 20 m/s. (Ignore the effect of friction) (2 marks) (3 marks) Work, Energy and Power Q1. A particle is subjected to force F x that varies with position as shown in the figure. Find the work done by the force on the particle as it moves (a) from x = 0 m to x = 4 m (b) from x = 4 m to x = 8 m (c) from x = 8 m to x = 12 m (d) What is the total work done by the force over distance x = 0 m to x = 12 m. (2 marks) Q2. (i) Define conservative force. (ii) What is the equivalence of mass and energy? (iii) An electron is moving through a potential of 15 ev. What is the mass of the electron? (3 marks) Q3. State and prove the work energy theorem. (2 marks) Q4. A variable force, F acts on an object where: F = (3 x 2 2 x + 4) N How much work is done by this force in moving the object form x = 2 m to x = 4 m? Q5. Derive an expression for final velocities of two point objects colliding elastically with each other. (2 marks) (3 marks)

5 System of particles and Rotational motion Q1. Three identical thin rods, each of length L and mass M are welded perpendicular to each other as shown in the figure. The system is rotated about an axis passing through the end of one rod and is parallel to another. Find the moment of inertia of the system. (3 marks) Q2. A wheel starts with 3 rad/s and rotates with a constant angular acceleration 4 rad/s 2. Find (a) its angular displacement at t = 2s (b) its angular speed at t = 3s (c) number of revolutions in 2s Q3. Consider a seesaw of length l as shown in the figure. It has two blocks at the end points of masses m and M ( M > m ) respectively. At a moment, system rotates with an angular speed ω. Find an expression for the magnitude of the system s angular momentum. (Rod of seesaw is mass less). (3 marks) (2 marks) Q4. Two particles A and B of mass 3 kg and 5 kg respectively are projected from same ground level as show in the figure. Find the velocity of the centre of mass of the system. (5 marks)

6 Q5. Obtain an expression for the position vector of the centre of mass of a system of two particles of masses m 1 and m 2. r 1 and r 2 are the position vectors of the two masses. Q6. Prove that the radii of gyration of a hollow sphere and a solid sphere having the same radius ' r ' about an axis passing through their centers and perpendicular to their plane are in the ratio (3 marks) (2 marks) Gravitation Q1. The ratio of time periods of two satellites orbiting a planet is 2 : 3. Calculate the ratio of their orbital velocities. Q2. A planet made entirely of iron has a radius of m. What would be the value of acceleration due to gravity on its surface? [Density of iron = 7850 km/m 3 ] Q3. Show that the escape speed from the moon is about five times smaller than that from the earth. The radii of earth and moon are 6370 km and 1737 km respectively. Q4. Deduce the total energy expression of the satellite of mass m moving in a circular orbit around the Earth? Explain the significance of this energy being negative. (2 marks) (2 marks) (2 marks) (3 marks) Mechanical Properties of Solids Q1. Label the given stress-strain curve for a metal wire. (1 mark) Q2. How much pressure should be applied on a litre of water to compress it by 0.2%? (2 marks)

7 (Given that: Bulk modulus of water = N/m 2 ) Q3. State Hooke's law. What are the conditions in which this law is valid? Find the expression for young's modulus of material of a wire of length l, radius of cross-section r loaded with a body of mass M producing an extension l in it. Q4. Find the tensile stress and elongation in a metal wire of length 6 m and the diameter of cross- section is 28 mm on which a load of 20 kg is suspended. (Young's modulus of the metal = N/m 2, take g = 10 ms 2 ) (2 marks) (2 marks) Mechanical Properties of Fluids Q1. An insect walks on water surface with the help of its legs. Each leg has an approximately spherical shape of radius m. The mass of the insect is kg. Find the angle at which its six legs are supported on the surface of water. Assume the water temperature is 20 C. Surface tension of water is N/m. Q2. (i) Name the principle which helps us to determine the speed of efflux. (ii) A water tank has a small hole in its side at a height 25 cm from the bottom. The height of the water column in the tank is 1 m. The air pressure inside the tank above the water column is Pa. Calculate the velocity with which water will come out from the small hole. Q3. A hydraulic lift has two pistons of radii 10 cm and 25 cm each. How much force should one exert on the piston with a smaller radius in order to use the machine to lift a car of mass 2310 kg? Q4. Using the law of conservation of energy, derive Bernoulli s equation for steady fluid flow? (3 marks) (1+2 marks) (2 marks) (5 marks) Thermal Properties of Matter Q1. What is the relation between the coefficients of linear expansion, area expansion and volume expansion. What would be the change in volume of a glass rod, which is initially 75 cm long and 2 cm thick, if its temperature is increased by 50 C. [ glass = C 1 ] (2 marks) Q2. What do the flat portions in the given graph signify? (2 marks)

8 Q g of ice at 10 C is supplied with heat energy of 210 kj. What will be its final state and temperature? (Heat of fusion of ice = 333 kj/kg; specific heat capacity of ice = 2220 J/kg/k) Q4. The given figure shows a pine wall of thickness d p and a brick wall of thickness d b (= 3 d p ). The pine wall and brick wall sandwich two layers of unknown material having identical thicknesses and thermal conductivities. The thermal conductivity of pine is kp and that of brick is k b (= 15 k p ). After the steady state is reached, the following measurements of interface temperatures are obtained. T 1 = 25 C T 2 = 20 C T 5 = 10 C Find the value of T 4. (3 marks) (2 marks) Thermodynamics Q1. Calculate the total work done by a sample of an ideal gas if it is heated by applying an energy of 200 J. [Take γ = 1.5] Q2. (i) Establish the relation, (ii) Why is greater than? Q3. What is Carnot theorem? Describe Carnot cycle and derive an expression for efficiency of the Carnot engine. Q4. Derive the expressions for the work done in an adiabatic and isothermal process and show that the p-v curve of adiabatic process is always steeper than the isothermal process. Kinetic Theory Q1. Calculate the specific heat capacity of one gram mole of a solid containing number of atoms. Q2. Using, explain the rise in temperature on heating a gas with the help (2 marks) (2+1 marks) (5 marks) (5 marks) (3 marks) (2 marks)

9 of the kinetic theory of gases. Oscillations Q1. The cone of the loudspeaker of a music player vibrates in SHM at a frequency of 300 Hz where the amplitude of the cone is m and x = A at t = 0. (A) Find the velocity and acceleration as a function of time. (B) Find the velocity and acceleration at t = 2.4 ms Q2. A block of mass 2 kg is attached to the ceiling by two springs parallel to each other of same spring constant 30 N/m. Find the frequency of the vibration. Q3. A spring gets stretched by 0.16 m when a block of mass 0.4 kg is hanged on it. The spring block system is then placed on a horizontal frictionless table and the block is then pulled so that the spring is stretched by 0.2 m from the equilibrium point and then released. Find (3 marks) (2 marks) (5 marks) (A) spring constant (B) magnitude of maximum velocity (C) magnitude of maximum acceleration Q4. A block of mass 700 g is fastened to a spring whose spring constant is k = 56 N/m. The block is kept on a frictionless table and pulled to a displacement of x = 15 cm from its equilibrium position and released from rest at t = 0. (i) What is the amplitude of oscillation? (ii) What is the initial phase of motion? (iii) What is the displacement function x ( t ) for the spring-block system? (3 marks) Waves Q1. Two guitar strings having identical wavelengths of m are tuned to 450 Hz. The tension in one of the strings is increased by 2.5% when they are stuck. Find the beat frequency between the fundamentals of the two strings. Q2. A firehouse has a siren on the roof which makes sound of frequency of 802 Hz. The air near the siren is blowing with speed of 10 ms 1. (a) Find the wavelength of the sound travelling in the medium. (b) Fire-fighters are approaching near the siren at speed of 10 ms 1. What frequency do they hear? Speed of sound in still air = 343 ms 1. Q3. The function of a transverse pulse in a string at t = 0 is given by The pulse is travelling in the positive x -direction with a speed of 5ms 1. Write the function. (2 marks) (2 marks) (1 mark)

10 Q4. A travelling harmonic wave on a string is expressed as (5 marks) Calculate: (i) amplitude, frequency, and wavelength of the wave (ii) displacement and velocity of the wave at x = 2 cm and t = 1 s Q5. When a speeding car goes past a police radar van, it measures a drop of 14% in the pitch of the sound produced by the horn. The velocity of sound in air is 325 m/s. Calculate the speed of the car. (3 marks) Q6. Describe standing wave and normal modes in a stretched spring. (5 marks) Ray Optics Q1. (i) Show that a converging lens of focal length f, placed between an object and a screen fixed at a distance D, will form a real image on the screen for two lens (2+3 marks) positions separated by a distance d, given by. (ii) Show that the ratio of the image sizes at these two positions is. Q2. How does the material of a prism affect the deviation it produces in the path of light through it? Q3. (i) A ray of light is incident on a prism having an angle of 60. If it deviates by an angle of 30, then what limit can one put on the refractive index from this data? (1 mark) (2+1 marks) (ii) How will a red object look under a sodium lamp light? Q4. The power of a system of two convex lenses placed in contact is +2 D. If one of the lenses is replaced by a concave lens of same focal length, then the power of the system becomes +1.5 D. What is the focal length of the two convex lenses? Q5. What is the critical angle for a glass air surface, if a ray of light incident in air on the glass surface at an angle of 45 is deviated by 10? Q6. A combination of a flint glass prism and a crown glass prism ( μ v = 1.523, μ r = 1.515) produces dispersion of light without deviation. The (3 marks) (2 marks) (2 marks)

11 angle of prism of the crown glass prism is 6. What should be the angle of prism in the flint glass prism?

12 Grade XI Physics Exam Preparation Booklet Chapter-wise Solutions of Important Questions #GrowWithGreen

13 Ans 1. The given relation is Units and Measurements Physical relations should be dimensionally correct. Also, two physical quantities add only when their dimensions are the same. If we divide 2(P P a ) by density ρ, then dimension of both the quantity will become the same. This can be shown as Also, dimension of v = [M 0 L 1 T 1 ] And dimension of Hence, the correct expression for the speed of efflux is Ans 2. We can rearrange the given equation to ascertain the value of C 2. And the corresponding error equation would be

14 Now, equation (1) can be used to calculate the capacitance C 2, so or the capacitance C 2 would be, C 2 = 0.39 µf...(3) Now, the error in measurement of C 2 can be calculated using (2), so So, the required value of C 2 is 0.39 ± 0.19 µf Ans 1. Ans 2. Motion in a Straight Line (i) The motion of a car with constant acceleration is represented by a straight line parallel to the t -axis on an acceleration-time graph. It can be observed in the given graph that a - t curve is parallel to the t -axis in the intervals 18 s 20 s. Hence, the car has moved with constant acceleration in the interval 18 s 20 s. (ii) When a car is moving with zero acceleration, its motion can be represented by a straight line on the t -axis in an acceleration-time graph. It can be observed that the curve is a straight line on the t -axis itself in the interval 10 s 18 s. Hence, the car has moved with zero acceleration between the interval 10 s 18 s. Given that, varying acceleration, For velocity v, it can be written as

15 For displacement dx, it can be written as Ans 3. From the third equation of motion, we have: If, u = 70 km/h, s =? Again, we have, Ans 4. Hence, the minimum stopping distance would have been 160 m. For uniformly accelerated motion,

16 If initial velocity is taken as v 0, final velocity as v, and t 1 t 2 = t, then. Or, (First equation of motion) This relation can be represented graphically as shown below: The area under the curve of this graph gives displacement x. Total Area = Area of triangle QRT + Area of OPQT But, v = v 0 + at. Thus, equation (i) can also be written as:

17 Ans 1. (a) The tangential acceleration is given as Motion in a Plane or So, a t = 4 t Now, at t = 2 s. a t = So, tangential acceleration will be a t = 15.5 cm/s 2 (b) Now, the radial acceleration is given as Now, at t = 2 seconds

18 Thus, a T = cm/s 2 Thus, the total acceleration will be Ans 2. Suppose Given, So, = AB cos α = 2 = 0 5 2α = 0 Ans 3. Horizontal range, The maximum height attained, for θ = 45

19 Ans 4. From (i) and (ii), R max = 4H max Velocity of man, Velocity of rain Man should hold the umbrella at angle θ as shown in figure. Negative sign show that angle is made with negative x -axis, and slope is downward. Ans 1. Laws of Motion Let us construct an appropriate diagram illustrating the concerned situation.

20 (a) Now, under equilibrium condition along the y direction N mg cos θ...(1) = cos 60 or N = 24.5 N...(2) Now, along the x direction f s = mg sin 60 Now as f = μ s s N, we have μ s N = mg sin 60 or Thus, the coefficient of static friction is μ s = (b) The force of static friction will be f s = μ s N = Or f s = N Ans 2. We shall construct a free body diagram for the given situation (forces are considered only along x axis)

21 (a) Now, each block will undergo same acceleration as they are imparted with the same force. According to Newton s second law, F = ma Or Here, m = m 1 + m 2 + m 3 = 2kg +5kg + 7kg = 14kg F = 20 N Thus, acceleration Or a = 1.43 m/s 2 Now, let us break up the free body diagram to find individual tensions Now, from the above figure, we get For block 3, F T 1 = m 3 a or T 1 = F m 3 a = 20 (7 1.43) Thus, T 1 = 9.99 N For block 2 Ans (5 1.43) Thus, T 2 = 2.84 N Here, we shall draw a free body diagram of the given situation.

22 Now, under equilibrium condition along x- axis T = T 2 cos 60 = 30 N Or and along y- axis W = T 2 sin 60 = mg or Ans 4. Ans 5. Thus, the mass of the object will be m = 5.30 kg Newton s second law of motion gives the magnitude of force. According to this law, force is the rate of change of momentum. The law expresses the requirement for a force to accelerate an object. Also, it gives an estimate of force and its output. Hence, the law is the basic law of motion. Let the recoil velocity of the gun be V. Initial momentum = 0 (before firing) Final momentum = 0 (after firing) Final momentum of gun = ( M m ) V Final momentum of bullet = mv

23 Final momentum of gun and bullet = (M m) V + mv (M m) V + mv = 0 Ans 6. (a) From the free body diagram of the banked road and the car, we can see that: Thus, Minimum force of friction = 0 Then, On dividing equation (3) by (2), we obtain: Hence, the track must be banked at an angle of. (b) Let the mass of the car be m.

24 The centripetal force acting on the car will be. Hence, the frictional force is zero. Ans 1. Work, Energy and Power = Area under force displacement curve (a) For the region 0 x 4 m (b) For the region 4m x 8 m W = 3 4 = 12 J (c) For the region 8 m x 12 m Ans 2. (d) For the region 0 x 12 m W = 6 J + 12 J + 6 J = 24 J (i) If the work done by a force on an object is independent of the path taken, then the force is known as conservative force. Spring force and gravitational force are the conservative forces. (ii) The equivalence of mass and energy suggests that mass is equivalent to energy and energy is equivalent to mass. Mass ( m ) and energy ( E ) are related as (ii) It is given that, Energy possessed by the electron, E = 15 ev = J Speed of light, c = m/s

25 The mass-energy equivalence relation is given as Ans 3. According to the work-energy theorem, if an external force acts on a rigid object, then the mechanical work done by the external force is equal to the change in the kinetic energy of the object. On using the third equation of motion, we obtain: v 2 u 2 = 2 as On multiplying both sides by Ans 4. Hence, Work done = Final kinetic energy Initial kinetic energy. Work done in producing infinitesimal displacement, dw = Fdx Ans 5. Hence, 40 J of work is done. We know that linear momentum and kinetic energy are conserved in an elastic collision,

26 m 1 v 1 + m 2 v 2 = m 1 u 1 + m 2 u 2 m 2 ( v 2 u 2 ) = m 1 ( u 1 v 1 )... (1) Also, On dividing equation (2) by (1), Now, on solving, we obtain: Similarly, Ans 1. System of Particles and Rotational Motion

27 For the rod along x-axis For the rod (along y-axis) parallel to the axis of rotation For the rod along z-axis Consider a infinitesimal amount of material between z and z + dz has mass and is at distance So, from the axis of rotation.

28 Ans 2. Given that, ω 0 = 3 rad/s α = 4 rad/s 2 (a) t = 20 s Using θ = 14 rad (b) t = 3 s Using ω = ω 0 + α t, we get, = = 15 rad/s ω =15 rad/s (c) Number revolutions in 2 s, Ans 3. Moment of inertia of system about point 0

29 Given angular speed of system = ω Angular momentum of the system is given by L = Iω Ans 4. Angle with x -axis

30 Ans 5. The given situation can be represented as r cm = Position vector of the centre of mass of the system The net force experienced by the system is equal to the vector sum of the forces experienced by two masses. Total mass of the system = m 1 + m 2 Let a 1, a 2, and a cm are the accelerations of mass m 1, mass m 2, and centre of mass respectively. Hence, it can be written Substituting Ans 6. Thus the position vector of the centre of mass of the given system. We know that, the moment of inertia a given as I = MR 2 = MK 2

31 Here, K is the radius of gyration Now, for a hollow sphere, the momentum of inertia is and for a solid sphere, the moment of inertia is Now, the ratio of the two radii of gyration will be Ans 1. According to Kepler s third law, Where, T time period R orbital radius Now, we have Gravitation We are given that T 1 : T 2 = 2 : 3 So, Now, we know that the orbital velocity can be written as So,

32 So, the ratio of orbital velocities will be Ans 2. The acceleration due to gravity is given as Where, M and R are the mass and radius of the planet respectively. Now, we now that mass (M) = density (D) volume (V) or Or M = kg Now, Ans 3. Thus, the value of acceleration due to gravity will be g = m/s 2 Escape speed from the surface of a planet is given by the relation,

33 For the Earth, = 9.8 m/s 2 = R E = 6370 km Escape speed of the earth, Ans 4. Consider a satellite in a circular orbit of radius (R E + h) from center of the earth. where, R E = radius of the earth and, h = distance of satellite from surface of the earth. If m is the mass and v is speed of the satellite. Then the centripetal force required for the orbit is, directed towards the center. This centripetal force is provided by the gravitational force, i.e. Comparing equation (1) and (2). We get, Now kinetic energy of the satellite, Now potential energy from the center of the earth is, where, M E = mass of the earth The negative total energy indicates that the motion of the satellite is bound towards the Earth.

34 Ans 1. Mechanical Properties of Solids Ans 2. Change in volume = 0.2% = l Ans 3. Hence, N/m 2 pressure should be applied on a litre of water to compress it by 0.2%. Hooke s law states that strain produced on a string is directly proportional to the stress applied to it. This law is obeyed by many materials as long as the load doesn t exceed the material's elastic limit. This implies Hooke s law is applicable until the stress-strain curve is linear (i.e. when they are directly proportional to each other). Stress α strain Stress = k strain Where, k is the proportionality constant, and is known as the modulus of elasticity Following are the three different types of moduli: 1. Young s Modulus of Elasticity : It is the ratio of the normal stress to the longitudinal strain given by:

35 Ans 4. Where, F - Force applied here F = mg r - Radius of the wire l - Original length l - Change in length Unit Nm 2 or Pascal (denoted by Pa) Here the restoring force will have magnitude equal to the weight of the load that is F = mg so, F = mg = Nm -2 Elongation. Ans 1. Mechanical Properties of Fluids The upward surface tension force is equal to the downward gravitational pull. Now, the surface tension force acts all around a circle of radius r, at angle θ. The weight mg is balanced by the vertical components of force. Now, the length which is in contact with the water, L 2π r (as the circumference is very small) So, the net upward force due to surface tension is F y (S cos θ ) L F y 2π r S cos θ (1) The insect has six legs to support its balance, each supports one-sixth of the weight of the insect. So,

36 Ans 2. (i) The speed of efflux from the side of a container is given by the application of the Bernoulli s principle. (ii) It is given that, Height of the small hole from the bottom = 25 cm = 0.25 m Height of the water column = 1 m Hence, depth at which small hole is located, h = = 0.75 m Water density, ρ = 10 3 kg/m 3 Air pressure inside the tank above the water column, P = Pa Atmospheric pressure, P a = Pa Acceleration due to gravity, g = 9.8 m/s 2 Speed of efflux, v, is given as Ans 3. Hence, the speed of efflux of water is 3.94 m/s. According to Pascal s law, the pressure on the smaller piston due to the force exerted is transmitted undiminished throughout the liquid. Let the magnitude of force applied on the smaller piston be F 1. Let the magnitude of force obtained for lifting the car be F 2. Thus, where, A 1 = π (10) 2 cm 2 A 2 = π (25) 2 cm 2 F 2 = Weight of the car = = N. Or, Hence, one needs to exert a force of N to lift the car.

37 Ans 4. Let us consider steady flow of a liquid from region 1 to region 2: Here, P 1 = Pressure at region 1 on entry of liquid A 1 = Area of cross-section in region1 h 1= Height of region 1 from zero level v 1 = Velocity with which liquid enters region1 P 2 = Pressure at region 2 on exit of liquid A 2 = Area of cross-section in region 2 h 2 = Height of region 2 from zero level v 2 = Velocity with which liquid exits region 2 Now, let us consider the flow of liquid for an infinitesimal time interval, Work done on fluid at region1 From the equation of continuity of steady fluid flow, It is the same volume of fluid that exits region 2 in the same time internal Therefore, work done on fluid at region 2 Total work done on fluid = W 1 W 2 = ( P 1 P 2 ) V From the law of conservation of energy, part of this work done goes in increasing the gravitational potential energy of the fluid as it flows from height h 1 to height h 2, and a part of it is used in changing its kinetic energy. Also, we assume that there is no dissipation of energy. Increase in gravitational potential energy and g = Acceleration due to gravity where, ρ = Density of fluid Change in kinetic energy Thus, or,

38 This is Bernoulli s equation for steady fluid flow. Ans 1. Thermal Properties of Matter If a body has the coefficient of linear expansion α, coefficient of area expansion β and coefficient of volume expansion γ then ß= 2α and γ = 3α We shall use the following equation for superficial expansion. ΔV = 3 V 0 ΔT Here, ΔV change in volume V 0 original volume and ΔT = 50 C Now, by plugging in the values, we get Ans 2. Ans 3. So, the change in volume of the glass rod will be ΔV = cm 3 The flat portions in the given graph occur during the melting or boiling of water. During melting, the heat supplied to ice is used for overcoming the force of attraction between the molecules of ice. Owing to this, the heat supplied to ice does not cause any rise in temperature. As a result, we get a flat-shaped graph during melting. Similarly, during evaporation, the heat supplied to water is used for overcoming the force of attraction between the molecules of water. Owing to this, the heat supplied to water does not cause any rise in temperature. As a result, we get a flat-shaped graph during boiling. Heat required by 720 g of ice at 10 C to raise its temperature to 0 C, Q 1 = C ice m ( T f T i ) Where C ice = Specific heat capacity of ice = 2220 J/kg/k m = Mass of ice = 0.72 kg

39 T f = Final temperature = 0 C T i = Initial temperature = 10 C Therefore, Q 1 = = J = kj Since the ice is supplied 210 kj of heat, it has ( ) kj of energy left for it to melt. Q rem = Remaining heat energy = = kj Mass of ice that can melt using this energy ice Where L F = Heat of fusion of Ans 4. Or, Thus, we see that all the ice cannot melt with only 210 kj of energy. What we obtain is a freezing mixture of ice and water, whose temperature is 0 C. Mass of ice remaining = = g The final state thus consists of g of water and g of ice at 0 C. Let the area of the walls be A. Rate of heat conduction through pine wall, H p = k p A ( T 1 T 2 ) = k p A (25 20) = 5 k p A Rate of heat conduction through brick wall, H b = k b A ( T 4 T 5 ) = 15 k p A ( T ) Since the conduction is said to be steady, H p = H b. Or, 5 k p A = 15 k p A ( T ) 1 = 3 ( T ) Or, Ans 1. Thermodynamics Now, we calculate the total work done ( d W) by using the first law of thermodynamics shown below d W = d Q d U Here, d Q = n C P (T 2 T 1 ) and du = n CV (T 2 T 1 ) or Thus, Now, dw = dq du

40 Ans 2. Or by plugging in the values, we get, Thus, total work done will be d W = J (i) First law of thermodynamics is given as Where, = Amount of heat supplied to a system = Change in internal energy of the system = Work done = p = Specific heat capacity at constant volume = Specific heat capacity at constant pressure Specific heat is given by the relation, At constant pressure p, specific heat is given as

41 Ans 3. (ii) A part of C P goes on increasing the volume of the gas and the remaining increases the temperature of the gas while C V increases only the temperature of the gas. Hence, C P is greater than C V. Carnot's theorem states that No heat engine working at a given temperature has greater efficiency than that of a reversible engine working at the same temperature under same conditions. 1) Working between the two given temperatures of the hot ( T 1 ) and cold ( T 2 ) reservoirs, efficiency of no engine can be more than that of a Carnot engine. 2) Efficiency of the Carnot engine is independent of the nature of the working substance 3) For a Carnot cycle The sequence of steps constituting one cycle of a Carnot engine is called a Carnot cycle. It consists of four steps Isothermal expansion Adiabatic expansion Isothermal compression Adiabatic compression The p-v curve describing the carnot cycle is shown as: The initial pressure, volume and temperature of the ideal gas enclosed in the cylinder P 1,V 1 and T 1. From the curve it is observed that the gas first expands isothermally to the state having pressure, volume and temperature to be P 2, V 2 and T 1. From this state it compressed isothermally to the state having pressure, volume and temperature to be P 3, V 3 and T 2.From this state it is compressed adiabatically to the state having pressure, volume and temperature to be P 1, V 1 and T 1. The efficiency of the carnot engine can be found by calculating the work done in individual cycle. Isothermal expansion of gas Heat absorbed ( Q 1 ) by the gas from the reservoir is the work done. ( W 1 2 ) by the gas,

42 Step 2 3 Adiabatic expansion of gas Work done by the gas, Step 3 4 Isothermal compression Heat released (Q 2) by the gas to the reservoir is the work done (W 3 4 ) on the gas by the environment. Adiabatic compression Step 4 1 Work done on the gas, Total work done, W Efficiency (η) of a Carnot engine,

43 From the adiabatic processes in equations (2) and (4), we get On putting the values of equation (6) in equation (5), we get Ans 4. Isothermal Process It is the process that occurs at a constant temperature that is PV = Constant Isothermal changes take place in an ideal gas (at temperature T) Consider μ moles of an ideal gas enclosed in a cylinder with perfectly conducting walls and the piston that is perfectly frictionless and conducting Initially, Pressure = P1 Volume = V1 Finally, Pressure = P2 Volume = V2 At the intermediate stage, Pressure = P Work done for the entire process There is no change in the internal energy of an ideal gas in isothermal process. In isothermal expansion (V2 > V1), the gas absorbs heat and does work (W > 0) In isothermal compression (V2 < V1), work is done on the gas by the environment and heat is released.

44 Adiabatic Process During this process, no heat enters or leaves the thermodynamic system during the change. System is insulated from its surroundings. PVγ = Constant (1) γ = Ratio of specific heats f an ideal gas undergoes a change adiabatically, Initial state = P1, V1 Final state = P2, V2 Then, The following graph shows the P-V curves of an ideal gas for two adiabatic processes connecting two isotherms. Work done, From equation (1), we get = Constant is a constant

45 Work done by the gas (W > 0); so T2 < T1 Work done on the gas (W < 0); so T2 > T1 The slope of an isothermal or adiabatic curve is given by. For an isothermal change, PV= C Differentiating both sides P.dV + V.dP = 0 V.dP = PdV For adiabatic process, PVγ = C Differentiating both sides Pγ V(γ 1) dv + Vγ.dP = 0 Vγ dp = PV(γ 1) dv comparing the slopes of both the curves for adiabatic process for isothermal process we know that γ >1 so the p-v curve for adiabatic process will be more steeper than that of isothermal curve. Ans 1. Kinetic Theory We know that from the law of equi-partition of energy the total internal energy will be in a three dimensional consideration. U = 3 K B T N A = 3 RT So, according to the first law of thermodynamics ΔQ = ΔU + ΔW or ΔQ = ΔU + PΔV Now, if the substance is a solid, it is considered that its physical dimensions will not change. So, ΔV = 0 Thus ΔQ = ΔU or ΔQ = (3RT) = 3RΔT Now, the specific heat is given as

46 or Ans 2. So C = 3R Now, as R = 8.31 J/K/mole The specific heat of solids will be C = = J/K/mole According to the kinetic theory of gases, pressure and volume are related as: Thus, we see that temperature is a measure of the total kinetic energy of the gas i.e., when a gas is heated, the heat causes the gas particles to move more rapidly, thereby increasing their average kinetic energy. This rise in the kinetic energy is causes a rise in the temperature of the gas. Ans 1. Oscillations As sold in precious example Angular frequency of motion, ω = 2π f = 1884 rad s 1 So x = ( m) cos (1884t) (A) Velocity,

47 Ans 2. Acceleration, a (1.1304) (1884) cos (1884t) = cos (1884t) (B) At t = s, we have Velocity, v = sin ( rad) ms ms 1 Acceleration, a = cos ( rod) = 404 ms 2 Suppose the block is initially at equilibrium, then F 1 + F 2 = mg Now the spring is lowered by a distance x from the equilibrium, then F 1 + F 2 = mg kx kx F 1 + F 2 = mg 2kx Comparing this equation with the general form of SHM, we get that the effective spring constant of this system is 2k. Thus, frequency of vibration Ans 3. (A) Spring constant (B) When the mass passes through the equilibrium, all the energy is kinetic energy and hence, we get maximum velocity at this point. So, according to of conservation of energy

48 Now, A = 0.2 m, So, (C) The maximum acceleration occurs where the force is greatest ie, at x = A = 0.2 m According to Newton s second law, F = ma Ans 4. (i) The time-varying quantity of displacement function, (ωt + Φ) is called the 'phase' of a motion. Since the surface is frictionless and the block is released at 15 cm from it's equilibrium position with zero kinetic energy and maximum elastic potential energy, the block will have zero kinetic energy, whenever it is 15 cm from the equilibrium position. This means that the displacement will never be greater than 15 cm. Thus, the amplitude is 15 cm. (ii) At time t = 0, the block is located at x = x0. On substituting these values in the equation, x(t) = x0 sin (ωt + Φ) We have, 1 = sin Φ Or, Φ rad Hence, the initial phase of the motion is Φ rad.

49 (iii) Displacement function x(t) = x0 sin (ω t + Φ), where, Φ rad and, therefore, x ( t ) = 15 sin (8.94 t )

50 Ans 1. We have Waves Ans 2. Thus, f 2 = f 1 = Hz Thus, the beat frequency is f beat = Hz 450 Hz f beat = 5.59 Hz Sound moving upwind with speed = 333 ms 1 Similarly, sound moving downwind with speed vd = 343 ms 1 10 ms 1 = 353 ms 1 When the fire-fighters come from upwind direction, the relative speed of the source is zero. So, When the fire-fighters come from downwind direction, the relative speed of source is 20 ms 1. Ans 3. So, After time t, the displacement Thus, putting the expression for x, in the given equation, we get

51 Ans 4. This is a required function y(x, t) (i) The general equation of a travelling wave is given as Where, y (x, t) = Displacement of the wave at distance x and time t A = Amplitude of the wave ω = Angular frequency = 2πν ν = Frequency of oscillation k = Propagation constant = ʎ = Wavelength of the wave Φ = Phase angle Comparing equation (1) with the given equation, we obtain A = 1 m ω = 2πν = 10 rad/s k = = m 1 (ii) The travelling harmonic wave on a string is expressed as For x = 0.02 m and t = 1 s, the given equation reduces to Negative sign indicates that the point is below the x-axis. Velocity of the wave is given as

52 Ans 5. When the car is moving towards the van, the change in horn frequency is given as When the car crosses the van, the change in horn frequency is given as On dividing these relations, we obtain Where, v 0 = Velocity of sound in air = 325 m/s v s = Velocity of the car The pitch (frequency) of the horn sound has dropped by 14% i.e. Ans 6. Standing Wave and Normal Modes in a Stretched String Steady wave pattern in a string is called stationary wave. Incident and reflected waves are represented as y = a sin (ωt kx) (1) y = a sin (ωt+ kx) (2) Applying principle of superposition, y = y 1 + y 2

53 Amplitude = 2a sin kx (varies from point to point) String vibrates in phase with different amplitudes at different points. They give rise to standing waves. Nodes points of zero amplitude Antinodes points of largest amplitude System has a fixed set of natural frequencies called normal modes of oscillation. Positions of nodes is given as, Distance between two successive nodes Position of antinodes is given as, Boundary condition of string L = Length of string From equation (3), Corresponding frequencies,

54 Fundamental mode Lowest possible natural frequency of a system Ans 1. Ray Optics (i) Let the object be at a distance u from the screen. The image distance is then given by D u (since, u is negative). On substituting the value in the lens equation, we obtain

55 This is quadratic in u. The two values of u are thus, The difference between u 1 and u 2 gives the distance of separation between them, d. Thus, (ii) When the object is at u 1 (lateral magnification)

56 When the object is of u 2 (lateral magnification) Ans 2. Deviation produced by a prism in the path of light through it, D = ( n 1) A Here, n is the refractive index of the material. Thus, a material with higher optical density (refractive index) will deviate light through a larger angle. Ans 3. (i) We know In general,

57 (ii) A Red object absorbs all wavelengths of incident light (other than red). It reflects only red and thus, appears red. Since a sodium lamp provides only yellow light, the object absorbs all light incident on it and reflects nothing. Hence, it appears black under sodium vapour light. Ans 4. Power of the system of two convex lenses, P = +2 D Hence, length of the system of two lenses, Power of the system of one convex lens and one concave lens, P = +1.5 D Hence, length of the system of two lenses, Let x and y are the focal lengths of the two convex lenses. The relation connecting two focal lengths with the equivalent focal length is given by, And, On adding two equations, we obtain By subtracting equation (2) from equation (1), we obtain

58 Hence, the focal lengths of the two convex lenses are cm and 400 cm respectively. Ans 5. Angle of refraction, r = = 35 Let μ be the refractive index of glass with respect to air. Thus, Let the critical angle be i C. We know, Thus, Or, Hence, the critical angle for a interface is

59 Ans 6. In order for no deviation to be produced, (Deviation by flint glass) = (Deviation by crown glass). The negative sign indicates that the two prisms must be oriented oppositely.

Grade XI. Physics Exam Preparation Booklet. Chapter-wise Important Questions. #GrowWithGreen

Grade XI. Physics Exam Preparation Booklet. Chapter-wise Important Questions. #GrowWithGreen Grade XI Physics Exam Preparation Booklet Chapter-wise Important Questions #GrowWithGreen Units and Measurements Q1. After reading the physics book, Anamika recalled and noted down the expression for the

More information

Grade XI. Physics Mock Test. #GrowWithGreen

Grade XI. Physics Mock Test. #GrowWithGreen Grade XI Physics Mock Test #GrowWithGreen Mock Test Physics Questions General Instructions: (i) (ii) (iii) (iv) (v) (vi) (vii) The question paper comprises 4 Sections, A, B, C and D. You are to attempt

More information

MODEL PAPER CLASS XI PHYSICS (GROUP 1) BLUEPRINT Name of chapter (1)

MODEL PAPER CLASS XI PHYSICS (GROUP 1) BLUEPRINT Name of chapter (1) sr. no. MODEL PAPER CLASS XI PHYSICS (GROUP ) BLUEPRINT Name of chapter VSAQ () SA-I (2) SA-II (3) Value based (4) LA(5) Total 70 Physical world and measurement 3 2 Kinematics 2 3,3 5 3 Laws of motion

More information

PHYSICS. Course Structure. Unit Topics Marks. Physical World and Measurement. 1 Physical World. 2 Units and Measurements.

PHYSICS. Course Structure. Unit Topics Marks. Physical World and Measurement. 1 Physical World. 2 Units and Measurements. PHYSICS Course Structure Unit Topics Marks I Physical World and Measurement 1 Physical World 2 Units and Measurements II Kinematics 3 Motion in a Straight Line 23 4 Motion in a Plane III Laws of Motion

More information

PHYS 1303 Final Exam Example Questions

PHYS 1303 Final Exam Example Questions PHYS 1303 Final Exam Example Questions (In summer 2014 we have not covered questions 30-35,40,41) 1.Which quantity can be converted from the English system to the metric system by the conversion factor

More information

Force, Energy & Periodic Motion. Preparation for unit test

Force, Energy & Periodic Motion. Preparation for unit test Force, Energy & Periodic Motion Preparation for unit test Summary of assessment standards (Unit assessment standard only) In the unit test you can expect to be asked at least one question on each sub-skill.

More information

D.A.V. PUBLIC SCHOOL, UPPAL S SOUTHEND, SECTOR 49, GURUGRAM CLASS XI (PHYSICS) Academic plan for

D.A.V. PUBLIC SCHOOL, UPPAL S SOUTHEND, SECTOR 49, GURUGRAM CLASS XI (PHYSICS) Academic plan for D.A.V. PUBLIC SCHOOL, UPPAL S SOUTHEND, SECTOR 49, GURUGRAM CLASS XI (PHYSICS) Academic plan for 2017-2018 UNIT NAME OF UNIT WEIGHTAGE 1. 2. 3. Physical World and Measurement Kinemetics Laws of Motion

More information

Class XI Physics Syllabus One Paper Three Hours Max Marks: 70

Class XI Physics Syllabus One Paper Three Hours Max Marks: 70 Class XI Physics Syllabus 2013 One Paper Three Hours Max Marks: 70 Class XI Weightage Unit I Physical World & Measurement 03 Unit II Kinematics 10 Unit III Laws of Motion 10 Unit IV Work, Energy & Power

More information

ANSWERS 403 INDEX. Bulk modulus 238 Buoyant force 251

ANSWERS 403 INDEX. Bulk modulus 238 Buoyant force 251 ANSWERS 403 INDEX A Absolute scale temperature 276 Absolute zero 276 Acceleration (linear) 45 Acceleration due to gravity 49,189 Accuracy 22 Action-reaction 97 Addition of vectors 67 Adiabatic process

More information

DIVIDED SYLLABUS ( ) - CLASS XI PHYSICS (CODE 042) COURSE STRUCTURE APRIL

DIVIDED SYLLABUS ( ) - CLASS XI PHYSICS (CODE 042) COURSE STRUCTURE APRIL DIVIDED SYLLABUS (2015-16 ) - CLASS XI PHYSICS (CODE 042) COURSE STRUCTURE APRIL Unit I: Physical World and Measurement Physics Need for measurement: Units of measurement; systems of units; SI units, fundamental

More information

UNIVERSITY OF MALTA G.F. ABELA JUNIOR COLLEGE

UNIVERSITY OF MALTA G.F. ABELA JUNIOR COLLEGE UNIVERSITY OF MALTA G.F. ABELA JUNIOR COLLEGE FIRST YEAR END-OF-YEAR EXAMINATION SUBJECT: PHYSICS DATE: JUNE 2010 LEVEL: INTERMEDIATE TIME: 09.00h to 12.00h Show ALL working Write units where appropriate

More information

TERM WISE SYLLABUS SESSION CLASS-XI SUBJECT: PHYSICS MID TERM

TERM WISE SYLLABUS SESSION CLASS-XI SUBJECT: PHYSICS MID TERM TERM WISE SYLLABUS SESSION-2018-19 CLASS-XI SUBJECT: PHYSICS MID TERM MONTH April 2018 To September 2018 CONTENTS UNIT -I: PHYSICAL WORLD AND MEASURMENT Chapter-1 : Physical World Physics - Scope and excitement,

More information

PHYSICS 221, FALL 2011 EXAM #2 SOLUTIONS WEDNESDAY, NOVEMBER 2, 2011

PHYSICS 221, FALL 2011 EXAM #2 SOLUTIONS WEDNESDAY, NOVEMBER 2, 2011 PHYSICS 1, FALL 011 EXAM SOLUTIONS WEDNESDAY, NOVEMBER, 011 Note: The unit vectors in the +x, +y, and +z directions of a right-handed Cartesian coordinate system are î, ĵ, and ˆk, respectively. In this

More information

UNIVERSITY OF MANITOBA. All questions are of equal value. No marks are subtracted for wrong answers.

UNIVERSITY OF MANITOBA. All questions are of equal value. No marks are subtracted for wrong answers. (3:30 pm 6:30 pm) PAGE NO.: 1 of 7 All questions are of equal value. No marks are subtracted for wrong answers. Record all answers on the computer score sheet provided. USE PENCIL ONLY! Black pen will

More information

Summary PHY101 ( 2 ) T / Hanadi Al Harbi

Summary PHY101 ( 2 ) T / Hanadi Al Harbi الكمية Physical Quantity القانون Low التعريف Definition الوحدة SI Unit Linear Momentum P = mθ be equal to the mass of an object times its velocity. Kg. m/s vector quantity Stress F \ A the external force

More information

NEW HORIZON PRE UNIVERSITY COLLEGE LESSON PLAN FOR THE ACADEMIC YEAR Department of PHYSICS ( I PUC)

NEW HORIZON PRE UNIVERSITY COLLEGE LESSON PLAN FOR THE ACADEMIC YEAR Department of PHYSICS ( I PUC) NEW HORIZON PRE UNIVERSITY COLLEGE LESSON PLAN FOR THE ACADEMIC YEAR 017 018 Department of PHYSICS ( I PUC) Week --------------------- Month: June Chapter (Physical world) Scope and excitement of Physics

More information

CHAPTER 1: PHYSICAL QUANTITIES AMD MEASUREMENT

CHAPTER 1: PHYSICAL QUANTITIES AMD MEASUREMENT CHAPTER 1: PHYSICAL UANTITIES AMD MEASUREMENT 11 Physical uantities and Units a) State basic quantities and their respective SI units: length (m), time (s), mass (kg), electrical current (A), temperature

More information

Department of Physics

Department of Physics Department of Physics PHYS101-051 FINAL EXAM Test Code: 100 Tuesday, 4 January 006 in Building 54 Exam Duration: 3 hrs (from 1:30pm to 3:30pm) Name: Student Number: Section Number: Page 1 1. A car starts

More information

Solution to phys101-t112-final Exam

Solution to phys101-t112-final Exam Solution to phys101-t112-final Exam Q1. An 800-N man stands halfway up a 5.0-m long ladder of negligible weight. The base of the ladder is.0m from the wall as shown in Figure 1. Assuming that the wall-ladder

More information

Figure 1 Answer: = m

Figure 1 Answer: = m Q1. Figure 1 shows a solid cylindrical steel rod of length =.0 m and diameter D =.0 cm. What will be increase in its length when m = 80 kg block is attached to its bottom end? (Young's modulus of steel

More information

AIPMT 2015 (Code: E) DETAILED SOLUTION

AIPMT 2015 (Code: E) DETAILED SOLUTION AIPMT 2015 (Code: E) DETAILED SOLUTION Physics 1. If energy (E), velocity (V) and time (T) are chosen as the fundamental quantities, the dimensional formula of surface tension will be: (1) [EV 2 T 1 ]

More information

ITL Public School Annual Examination ( ) Physics(042) (Set -A)

ITL Public School Annual Examination ( ) Physics(042) (Set -A) ITL Public School Annual Examination (0-4) Physics(04) (Set -A) ANSWER KEY Date:.0. Time: hrs 4 6 7 Section - A A cubical block rests on an inclined plane of coefficient of friction /. Determine the angle

More information

PHYSICS. 2. A force of 6 kgf and another force of 8 kg f can be applied to produce the effect of a single force equal to

PHYSICS. 2. A force of 6 kgf and another force of 8 kg f can be applied to produce the effect of a single force equal to PHYSICS 1. A body falls from rest, in the last second of its fall, it covers half of the total distance. Then the total time of its fall is (A) 2 + 2 sec (B) 2-2 sec (C) 2 2 (D) 4 sec 2. A force of 6 kgf

More information

is acting on a body of mass m = 3.0 kg and changes its velocity from an initial

is acting on a body of mass m = 3.0 kg and changes its velocity from an initial PHYS 101 second major Exam Term 102 (Zero Version) Q1. A 15.0-kg block is pulled over a rough, horizontal surface by a constant force of 70.0 N acting at an angle of 20.0 above the horizontal. The block

More information

Q1. Which of the following is the correct combination of dimensions for energy?

Q1. Which of the following is the correct combination of dimensions for energy? Tuesday, June 15, 2010 Page: 1 Q1. Which of the following is the correct combination of dimensions for energy? A) ML 2 /T 2 B) LT 2 /M C) MLT D) M 2 L 3 T E) ML/T 2 Q2. Two cars are initially 150 kilometers

More information

i.e. the tighter the curve, the larger the radial acceleration. 56) Which of the following is an accurate statement about circular motion?

i.e. the tighter the curve, the larger the radial acceleration. 56) Which of the following is an accurate statement about circular motion? 55) If a particle travels at a constant speed along the track shown, what is the correct ordering of the magnitudes of the acceleration at the labeled points? Let a P be the acceleration at point P, etc.

More information

Physics in Faculty of

Physics in Faculty of Why we study Physics in Faculty of Engineering? Dimensional analysis Scalars and vector analysis Rotational of a rigid body about a fixed axis Rotational kinematics 1. Dimensional analysis The ward dimension

More information

9 MECHANICAL PROPERTIES OF SOLIDS

9 MECHANICAL PROPERTIES OF SOLIDS 9 MECHANICAL PROPERTIES OF SOLIDS Deforming force Deforming force is the force which changes the shape or size of a body. Restoring force Restoring force is the internal force developed inside the body

More information

King Fahd University of Petroleum and Minerals Department of Physics. Final Exam 041. Answer key - First choice is the correct answer

King Fahd University of Petroleum and Minerals Department of Physics. Final Exam 041. Answer key - First choice is the correct answer King Fahd University of Petroleum and Minerals Department of Physics MSK Final Exam 041 Answer key - First choice is the correct answer Q1 A 20 kg uniform ladder is leaning against a frictionless wall

More information

Q1. A) 46 m/s B) 21 m/s C) 17 m/s D) 52 m/s E) 82 m/s. Ans: v = ( ( 9 8) ( 98)

Q1. A) 46 m/s B) 21 m/s C) 17 m/s D) 52 m/s E) 82 m/s. Ans: v = ( ( 9 8) ( 98) Coordinator: Dr. Kunwar S. Wednesday, May 24, 207 Page: Q. A hot-air balloon is ascending (going up) at the rate of 4 m/s and when the balloon is 98 m above the ground a package is dropped from it, vertically

More information

Delhi Public School, Jammu Question Bank ( )

Delhi Public School, Jammu Question Bank ( ) Class : XI Delhi Public School, Jammu Question Bank (2017 18) Subject : Physics 1. When real gases obey the ideal gas equation pv = RT? Ans. a) Low pressure b) High temperature 2. Give reason: Though earth

More information

PHYSICS PAPER 1. (THEORY) (Three hours)

PHYSICS PAPER 1. (THEORY) (Three hours) PHYSICS PAPER 1 (THEY) (Three hours) (Candidates are allowed additional 15 minutes for only reading the paper. They must NOT start writing during this time.) All questions are compulsory. Question number

More information

AP Physics B Summer Assignment

AP Physics B Summer Assignment BERGEN COUNTY TECHNICAL SCHOOL AP Physics B Summer Assignment 2011 Solve all problems on separate paper. This will be due the first week of school. If you need any help you can e-mail Mr. Zavorotniy at

More information

Chapter 13. Hooke s Law: F = - kx Periodic & Simple Harmonic Motion Springs & Pendula Waves Superposition. Next Week!

Chapter 13. Hooke s Law: F = - kx Periodic & Simple Harmonic Motion Springs & Pendula Waves Superposition. Next Week! Chapter 13 Hooke s Law: F = - kx Periodic & Simple Harmonic Motion Springs & Pendula Waves Superposition Next Week! Review Physics 2A: Springs, Pendula & Circular Motion Elastic Systems F = kx Small Vibrations

More information

PRACTICE QUESTION PAPER WITH SOLUTION CLASS XI PHYSICS

PRACTICE QUESTION PAPER WITH SOLUTION CLASS XI PHYSICS PRACTICE QUESTION PAPER WITH SOLUTION CLASS XI PHYSICS. A given quantity has both magnitude and direction. Is it necessarily a vector? Justify your answer.. What is the rotational analogue of the force?.

More information

Center of Mass & Linear Momentum

Center of Mass & Linear Momentum PHYS 101 Previous Exam Problems CHAPTER 9 Center of Mass & Linear Momentum Center of mass Momentum of a particle Momentum of a system Impulse Conservation of momentum Elastic collisions Inelastic collisions

More information

Oscillations - AP Physics B 1984

Oscillations - AP Physics B 1984 Oscillations - AP Physics B 1984 1. If the mass of a simple pendulum is doubled but its length remains constant, its period is multiplied by a factor of (A) 1 2 (B) (C) 1 1 2 (D) 2 (E) 2 A block oscillates

More information

Physics 2101, Final Exam, Form A

Physics 2101, Final Exam, Form A Physics 2101, Final Exam, Form A December 11, 2007 Name: SOLUTIONS Section: (Circle one) 1 (Rupnik, MWF 7:40am) 2 (Rupnik, MWF 9:40am) 3 (González, MWF 2:40pm) 4 (Pearson, TTh 9:10am) 5 (Pearson, TTh 12:10pm)

More information

Physics for Scientists and Engineers 4th Edition, 2017

Physics for Scientists and Engineers 4th Edition, 2017 A Correlation of Physics for Scientists and Engineers 4th Edition, 2017 To the AP Physics C: Mechanics Course Descriptions AP is a trademark registered and/or owned by the College Board, which was not

More information

SIR MICHELANGELO REFALO CENTRE FOR FURTHER STUDIES VICTORIA GOZO

SIR MICHELANGELO REFALO CENTRE FOR FURTHER STUDIES VICTORIA GOZO SIR MICHELANGELO REFALO CENTRE FOR FURTHER STUDIES VICTORIA GOZO Half-Yearly Exam 2013 Subject: Physics Level: Advanced Time: 3hrs Name: Course: Year: 1st This paper carries 200 marks which are 80% of

More information

1. The y-component of the vector A + B is given by

1. The y-component of the vector A + B is given by Name School PHYSICS CONTEST EXAMINATION 2015 January 31, 2015 Please use g as the acceleration due to gravity at the surface of the earth unless otherwise noted. Please note that i^, j^, and k^ are unit

More information

3. The displacement of the particle along a straight line at time t is given 2. are constants. The acceleration of the particle is

3. The displacement of the particle along a straight line at time t is given 2. are constants. The acceleration of the particle is +1 PHYSICS BOOK BACK ONE WORD UNIT 1 1. Which of the following are equivalent? (a) 6400 km and 6.4 x 10 8 cm (b) 2 x 10 4 cm and 2 x 10 6 mm (c) 800 m and 80 x 10 2 m (d) 100 μm and 1 mm 2. Red light has

More information

8. A stone is dropped from the window of a train moving along a 7. The dimensional formula for gravitational constant is

8. A stone is dropped from the window of a train moving along a 7. The dimensional formula for gravitational constant is +1 PHYSICS BOOK BACK ONE WORD UNIT 1 1. Which of the following are equivalent? (a) 6400 km and 6.4 x 10 8 cm (b) 2 x 10 4 cm and 2 x 10 6 mm (c) 800 m and 80 x 10 2 m (d) 100 μm and 1 mm 2. Red light has

More information

2007 Problem Topic Comment 1 Kinematics Position-time equation Kinematics 7 2 Kinematics Velocity-time graph Dynamics 6 3 Kinematics Average velocity

2007 Problem Topic Comment 1 Kinematics Position-time equation Kinematics 7 2 Kinematics Velocity-time graph Dynamics 6 3 Kinematics Average velocity 2007 Problem Topic Comment 1 Kinematics Position-time equation Kinematics 7 2 Kinematics Velocity-time graph Dynamics 6 3 Kinematics Average velocity Energy 7 4 Kinematics Free fall Collisions 3 5 Dynamics

More information

v (m/s) 10 d. displacement from 0-4 s 28 m e. time interval during which the net force is zero 0-2 s f. average velocity from 0-4 s 7 m/s x (m) 20

v (m/s) 10 d. displacement from 0-4 s 28 m e. time interval during which the net force is zero 0-2 s f. average velocity from 0-4 s 7 m/s x (m) 20 Physics Final Exam Mechanics Review Answers 1. Use the velocity-time graph below to find the: a. velocity at 2 s 6 m/s v (m/s) 1 b. acceleration from -2 s 6 c. acceleration from 2-4 s 2 m/s 2 2 4 t (s)

More information

Pre-AP Physics Review Problems

Pre-AP Physics Review Problems Pre-AP Physics Review Problems SECTION ONE: MULTIPLE-CHOICE QUESTIONS (50x2=100 points) 1. The graph above shows the velocity versus time for an object moving in a straight line. At what time after t =

More information

1. For which of the following motions of an object must the acceleration always be zero?

1. For which of the following motions of an object must the acceleration always be zero? 1. For which of the following motions of an object must the acceleration always be zero? I. Any motion in a straight line II. Simple harmonic motion III. Any motion in a circle I only II only III that

More information

Oscillations. PHYS 101 Previous Exam Problems CHAPTER. Simple harmonic motion Mass-spring system Energy in SHM Pendulums

Oscillations. PHYS 101 Previous Exam Problems CHAPTER. Simple harmonic motion Mass-spring system Energy in SHM Pendulums PHYS 101 Previous Exam Problems CHAPTER 15 Oscillations Simple harmonic motion Mass-spring system Energy in SHM Pendulums 1. The displacement of a particle oscillating along the x axis is given as a function

More information

CHAPTER 11 VIBRATIONS AND WAVES

CHAPTER 11 VIBRATIONS AND WAVES CHAPTER 11 VIBRATIONS AND WAVES http://www.physicsclassroom.com/class/waves/u10l1a.html UNITS Simple Harmonic Motion Energy in the Simple Harmonic Oscillator The Period and Sinusoidal Nature of SHM The

More information

SPRING GROVE AREA SCHOOL DISTRICT. Course Description. Instructional Strategies, Learning Practices, Activities, and Experiences.

SPRING GROVE AREA SCHOOL DISTRICT. Course Description. Instructional Strategies, Learning Practices, Activities, and Experiences. SPRING GROVE AREA SCHOOL DISTRICT PLANNED COURSE OVERVIEW Course Title: Advanced Placement Physics 1 Grade Level(s): 10-12 Units of Credit: 1.5 credits Classification: Elective Length of Course: 30 cycles

More information

e h /

e h / TOPPER SAMPLE PAPER 3 XI PHYSICS Time: Three Hours Maximum Marks: 70 General Instructions (a) All questions are compulsory. (b)there are 30 questions in total. Questions 1 to 8 carry one mark each, questions

More information

INTERNATIONAL INDIAN SCHOOL DAMMAM

INTERNATIONAL INDIAN SCHOOL DAMMAM INTERNATIONAL INDIAN SCHOOL DAMMAM SECOND TERMINAL EXAMINATION 2011 Class - XI Subject - Physics (Theory) Time: 3 hours Max. Marks 70 General Instructions 1. All questions are compulsory. Symbols have

More information

Physics 121, Final Exam Do not turn the pages of the exam until you are instructed to do so.

Physics 121, Final Exam Do not turn the pages of the exam until you are instructed to do so. , Final Exam Do not turn the pages of the exam until you are instructed to do so. You are responsible for reading the following rules carefully before beginning. Exam rules: You may use only a writing

More information

PHYS 101 Previous Exam Problems. Kinetic Energy and

PHYS 101 Previous Exam Problems. Kinetic Energy and PHYS 101 Previous Exam Problems CHAPTER 7 Kinetic Energy and Work Kinetic energy Work Work-energy theorem Gravitational work Work of spring forces Power 1. A single force acts on a 5.0-kg object in such

More information

SRI LANKAN PHYSICS OLYMPIAD COMPETITION 2008

SRI LANKAN PHYSICS OLYMPIAD COMPETITION 2008 SRI LANKAN PHYSICS OLYMPIAD COMPETITION 008 Time Allocated : 0 Hours Calculators are not allowed to use. Date of Examination : 1 07 008 Index No. :. Time : 9.30 a.m. - 11.30 a.m. INSTRUCTIONS Answer all

More information

Today s lecture. WEST VIRGINIA UNIVERSITY Physics

Today s lecture. WEST VIRGINIA UNIVERSITY Physics Today s lecture Review of chapters 1-14 Note: I m taking for granted that you ll still know SI/cgs units, order-of-magnitude estimates, etc., so I m focusing on problems. Velocity and acceleration (1d)

More information

PHYSICS 111 SPRING FINAL EXAM: May 2, 2017; 2:15pm - 4:15pm

PHYSICS 111 SPRING FINAL EXAM: May 2, 2017; 2:15pm - 4:15pm PHYSICS 111 SPRING 2017 FINAL EXAM: May 2, 2017; 2:15pm - 4:15pm Name (printed): Recitation Instructor: Section # INSTRUCTIONS: This exam contains 30 multiple-choice question, each worth 3 points, for

More information

SPRING 2003 Final Exam, Part A

SPRING 2003 Final Exam, Part A Physics 151 SPRING 2003 Final Exam, Part A Roster No.: Score: 17 pts. possible Exam time limit: 2 hours. You may use calculators and both sides of 2 sheets of notes, handwritten only. Closed book; no collaboration.

More information

PHYSICS BOOK BACK ONE MARKS 1. NATURE OF THE PHYSICAL WORLD AND MEASUREMENT

PHYSICS BOOK BACK ONE MARKS 1. NATURE OF THE PHYSICAL WORLD AND MEASUREMENT PHYSICS BOOK BACK ONE MARKS 1. NATURE OF THE PHYSICAL WORLD AND MEASUREMENT 1.1 Which of the following are equivalent? a) 6400 km and 6.4 x 10 8 cm b) 2 x 10 4 cm and 2 x 10 6 mm c) 800 m and 80 x 10 2

More information

r1 (D) r 2 = 2 r 1 (E) r 2 = 4r 1 2

r1 (D) r 2 = 2 r 1 (E) r 2 = 4r 1 2 April 24, 2013; Page 2 PART A FOR EACH OF THE FOLLOWING QUESTIONS IN PART A, ENTER THE MOST APPROPRIATE RESPONSE ON THE OMR SHEET. A1. A thin rod of mass M and length L is initially able to rotate through

More information

General Physics Contest 2010

General Physics Contest 2010 General Physics Contest 2010 May 22, 2010 (9:10-10:50), Total 6 pages Part I : Choice Questions (20 single-choice questions of 3% each. Use 2B pencil to mark the answer.) 1. A particle moving along the

More information

Chapter 13, Vibrations and Waves. 1. A large spring requires a force of 150 N to compress it only m. What is the spring constant of the spring?

Chapter 13, Vibrations and Waves. 1. A large spring requires a force of 150 N to compress it only m. What is the spring constant of the spring? CHAPTER 13 1. A large spring requires a force of 150 N to compress it only 0.010 m. What is the spring constant of the spring? a. 125 000 N/m b. 15 000 N/m c. 15 N/m d. 1.5 N/m 2. A 0.20-kg object is attached

More information

PHYSICS 221 SPRING FINAL EXAM: May 4, :30pm - 6:30pm

PHYSICS 221 SPRING FINAL EXAM: May 4, :30pm - 6:30pm PHYSICS 221 SPRING 2015 FINAL EXAM: May 4, 2015 4:30pm - 6:30pm Name (printed): Recitation Instructor: Section # INSTRUCTIONS: This exam contains 25 multiple-choice questions plus 2 extra credit questions,

More information

- 1 -APPH_MidTerm. Mid - Term Exam. Part 1: Write your answers to all multiple choice questions in this space. A B C D E A B C D E

- 1 -APPH_MidTerm. Mid - Term Exam. Part 1: Write your answers to all multiple choice questions in this space. A B C D E A B C D E Name - 1 -APPH_MidTerm AP Physics Date Mid - Term Exam Part 1: Write your answers to all multiple choice questions in this space. 1) 2) 3) 10) 11) 19) 20) 4) 12) 21) 5) 13) 22) 6) 7) 14) 15) 23) 24) 8)

More information

General Physics 1. School of Science, University of Tehran Fall Exercises (set 07)

General Physics 1. School of Science, University of Tehran Fall Exercises (set 07) General Physics 1 School of Science, University of Tehran Fall 1396-97 Exercises (set 07) 1. In Fig., wheel A of radius r A 10cm is coupled by belt B to wheel C of radius r C 25 cm. The angular speed of

More information

The graph shows how an external force applied to an object of mass 2.0 kg varies with time. The object is initially at rest.

The graph shows how an external force applied to an object of mass 2.0 kg varies with time. The object is initially at rest. T2-2 [195 marks] 1. The graph shows how an external force applied to an object of mass 2.0 kg varies with time. The object is initially at rest. What is the speed of the object after 0.60 s? A. 7.0 ms

More information

MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question.

MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question. Common Quiz Mistakes / Practice for Final Exam Name MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question. 1) A ball is thrown directly upward and experiences

More information

Chapter 15 Periodic Motion

Chapter 15 Periodic Motion Chapter 15 Periodic Motion Slide 1-1 Chapter 15 Periodic Motion Concepts Slide 1-2 Section 15.1: Periodic motion and energy Section Goals You will learn to Define the concepts of periodic motion, vibration,

More information

Wiley Plus. Final Assignment (5) Is Due Today: Before 11 pm!

Wiley Plus. Final Assignment (5) Is Due Today: Before 11 pm! Wiley Plus Final Assignment (5) Is Due Today: Before 11 pm! Final Exam Review December 9, 009 3 What about vector subtraction? Suppose you are given the vector relation A B C RULE: The resultant vector

More information

Name (LAST, First):, Block (circle): Date: / /

Name (LAST, First):, Block (circle): Date: / / Name (LAST, First):, Block (circle): 1 2 3 4 5 6 7 8 Date: / / MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question. 1) A new car manufacturer advertises

More information

Physics-MC Page 1 of 29 Inertia, Force and Motion 1.

Physics-MC Page 1 of 29 Inertia, Force and Motion 1. Physics-MC 2006-7 Page 1 of 29 Inertia, Force and Motion 1. 3. 2. Three blocks of equal mass are placed on a smooth horizontal surface as shown in the figure above. A constant force F is applied to block

More information

AP PHYSICS 1 Learning Objectives Arranged Topically

AP PHYSICS 1 Learning Objectives Arranged Topically AP PHYSICS 1 Learning Objectives Arranged Topically with o Big Ideas o Enduring Understandings o Essential Knowledges o Learning Objectives o Science Practices o Correlation to Knight Textbook Chapters

More information

Physics 121, Sections 1 and 2, Winter 2011 Instructor: Scott Bergeson Exam #3 April 16 April 21, 2011 RULES FOR THIS TEST:

Physics 121, Sections 1 and 2, Winter 2011 Instructor: Scott Bergeson Exam #3 April 16 April 21, 2011 RULES FOR THIS TEST: Physics 121, Sections 1 and 2, Winter 2011 Instructor: Scott Bergeson Exam #3 April 16 April 21, 2011 RULES FOR THIS TEST: This test is closed book. You may use a dictionary. You may use your own calculator

More information

PHYS 1114, Lecture 33, April 10 Contents:

PHYS 1114, Lecture 33, April 10 Contents: PHYS 1114, Lecture 33, April 10 Contents: 1 This class is o cially cancelled, and has been replaced by the common exam Tuesday, April 11, 5:30 PM. A review and Q&A session is scheduled instead during class

More information

Physics 161 Lecture 17 Simple Harmonic Motion. October 30, 2018

Physics 161 Lecture 17 Simple Harmonic Motion. October 30, 2018 Physics 161 Lecture 17 Simple Harmonic Motion October 30, 2018 1 Lecture 17: learning objectives Review from lecture 16 - Second law of thermodynamics. - In pv cycle process: ΔU = 0, Q add = W by gass

More information

Physics. Student Materials Advanced Higher. Tutorial Problems Mechanics HIGHER STILL. Spring 2000

Physics. Student Materials Advanced Higher. Tutorial Problems Mechanics HIGHER STILL. Spring 2000 Spring 2000 HIGHER STILL Physics Student Materials Advanced Higher Tutorial Problems Mechanics TUTORIAL 1 You will find tutorials on each topic. The fully worked out answers are available. The idea is

More information

A B = AB cos θ = 100. = 6t. a(t) = d2 r(t) a(t = 2) = 12 ĵ

A B = AB cos θ = 100. = 6t. a(t) = d2 r(t) a(t = 2) = 12 ĵ 1. A ball is thrown vertically upward from the Earth s surface and falls back to Earth. Which of the graphs below best symbolizes its speed v(t) as a function of time, neglecting air resistance: The answer

More information

Name (please print): UW ID# score last first

Name (please print): UW ID# score last first Name (please print): UW ID# score last first Question I. (20 pts) Projectile motion A ball of mass 0.3 kg is thrown at an angle of 30 o above the horizontal. Ignore air resistance. It hits the ground 100

More information

UNIVERSITY OF SASKATCHEWAN Department of Physics and Engineering Physics

UNIVERSITY OF SASKATCHEWAN Department of Physics and Engineering Physics UNIVERSITY OF SASKATCHEWAN Department of Physics and Engineering Physics Physics 111.6 MIDTERM TEST #2 November 15, 2001 Time: 90 minutes NAME: STUDENT NO.: (Last) Please Print (Given) LECTURE SECTION

More information

PHYS 1303 Final Exam Example Questions

PHYS 1303 Final Exam Example Questions PHYS 1303 Final Exam Example Questions 1.Which quantity can be converted from the English system to the metric system by the conversion factor 5280 mi f 12 f in 2.54 cm 1 in 1 m 100 cm 1 3600 h? s a. feet

More information

Quantitative Skills in AP Physics 1

Quantitative Skills in AP Physics 1 This chapter focuses on some of the quantitative skills that are important in your AP Physics 1 course. These are not all of the skills that you will learn, practice, and apply during the year, but these

More information

2. For a S.H.O. determine, (a) the total energy (E), the kinetic and potential energies. of half amplitude:

2. For a S.H.O. determine, (a) the total energy (E), the kinetic and potential energies. of half amplitude: The amplitude of vibration and hence, the energy transferred into the vibrating system is found to depend on the difference between f and, its maximum when the frequency of the external force is equal

More information

Mock Exam III PH 201, PH 221

Mock Exam III PH 201, PH 221 Mock Exam III PH 201, PH 221 April 12, 2015 You will have 1 hour to complete this exam, and must answer 7 of the problems correctly to make a perfect score. 1 Chapter Concept Summary Equations: Cutnell

More information

1. For a simple harmonic motion governed by Hooke s Law, F = kx, if T is the period then the quantity T/2π is equal to

1. For a simple harmonic motion governed by Hooke s Law, F = kx, if T is the period then the quantity T/2π is equal to 1. For a simple harmonic motion governed by Hooke s Law, F = kx, if T is the period then the quantity T/2π is equal to (a) m (b) (c) m k k k m (d) k m (e) the angular frequency ω 2. If the mass of a simple

More information

BLUE PRINT FOR MODEL QUESTION PAPER 3 BLUE PRINT

BLUE PRINT FOR MODEL QUESTION PAPER 3 BLUE PRINT Unit Chapter Number Number of teaching Hours Weightage of marks Mark Marks 3 Marks 5 Marks (Theory) 5 Marks (Numerica l Problem) BLUE PRINT FOR MODEL QUESTION PAPER 3 Class : I PUC Subject : PHYSICS (33)

More information

Personalised Learning Checklists AQA Physics Paper 2

Personalised Learning Checklists AQA Physics Paper 2 4.5.1 Forces and their interactions 4.5.2 Work done and energy AQA Physics (8463) from 2016 Topics P4.5. Forces Topic Student Checklist R A G Identify and describe scalar quantities and vector quantities

More information

PHYSICS 221, FALL 2009 EXAM #1 SOLUTIONS WEDNESDAY, SEPTEMBER 30, 2009

PHYSICS 221, FALL 2009 EXAM #1 SOLUTIONS WEDNESDAY, SEPTEMBER 30, 2009 PHYSICS 221, FALL 2009 EXAM #1 SOLUTIONS WEDNESDAY, SEPTEMBER 30, 2009 Note: The unit vectors in the +x, +y, and +z directions of a right-handed Cartesian coordinate system are î, ĵ, and ˆk, respectively.

More information

Physics 117A Final Exam Fall 2006

Physics 117A Final Exam Fall 2006 Physics 117A Final Exam Fall 2006 Only calculators and pens/pencils are allowed on your desk. No cell phones or additional scrap paper. You have 1.5 hours to complete the exam. Name Section (Circle): Hutson

More information

cos(θ)sin(θ) Alternative Exercise Correct Correct θ = 0 skiladæmi 10 Part A Part B Part C Due: 11:59pm on Wednesday, November 11, 2015

cos(θ)sin(θ) Alternative Exercise Correct Correct θ = 0 skiladæmi 10 Part A Part B Part C Due: 11:59pm on Wednesday, November 11, 2015 skiladæmi 10 Due: 11:59pm on Wednesday, November 11, 015 You will receive no credit for items you complete after the assignment is due Grading Policy Alternative Exercise 1115 A bar with cross sectional

More information

Periodic Motion. Periodic motion is motion of an object that. regularly repeats

Periodic Motion. Periodic motion is motion of an object that. regularly repeats Periodic Motion Periodic motion is motion of an object that regularly repeats The object returns to a given position after a fixed time interval A special kind of periodic motion occurs in mechanical systems

More information

ASSOCIATE DEGREE IN ENGINEERING TECHNOLOGY RESIT EXAMINATIONS. Semester 1 July 2012

ASSOCIATE DEGREE IN ENGINEERING TECHNOLOGY RESIT EXAMINATIONS. Semester 1 July 2012 ASSOCIATE DEGREE IN ENGINEERING TECHNOLOGY RESIT EXAMINATIONS Semester 1 July 2012 COURSE NAME: ENGINEERING PHYSICS I CODE: PHS 1005 GROUP: ADET 2 DATE: July 4, 2012 TIME: DURATION: 9:00 am 2 HOURS INSTRUCTIONS:

More information

Course Name: AP Physics. Team Names: Jon Collins. Velocity Acceleration Displacement

Course Name: AP Physics. Team Names: Jon Collins. Velocity Acceleration Displacement Course Name: AP Physics Team Names: Jon Collins 1 st 9 weeks Objectives Vocabulary 1. NEWTONIAN MECHANICS and lab skills: Kinematics (including vectors, vector algebra, components of vectors, coordinate

More information

Miami-Dade Community College PHY 2053 College Physics I

Miami-Dade Community College PHY 2053 College Physics I Miami-Dade Community College PHY 2053 College Physics I PHY 2053 3 credits Course Description PHY 2053, College physics I, is the first semester of a two semester physics-without-calculus sequence. This

More information

Sample Physics Placement Exam

Sample Physics Placement Exam Sample Physics 130-1 Placement Exam A. Multiple Choice Questions: 1. A cable is used to take construction equipment from the ground to the top of a tall building. During the trip up, when (if ever) is

More information

Exam #2, Chapters 5-7 PHYS 101-4M MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question.

Exam #2, Chapters 5-7 PHYS 101-4M MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question. Exam #2, Chapters 5-7 Name PHYS 101-4M MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question. 1) The quantity 1/2 mv2 is A) the potential energy of the object.

More information

PHYSICS 1 Simple Harmonic Motion

PHYSICS 1 Simple Harmonic Motion Advanced Placement PHYSICS 1 Simple Harmonic Motion Student 014-015 What I Absolutely Have to Know to Survive the AP* Exam Whenever the acceleration of an object is proportional to its displacement and

More information

1. A train moves at a constant velocity of 90 km/h. How far will it move in 0.25 h? A. 10 km B km C. 25 km D. 45 km E. 50 km

1. A train moves at a constant velocity of 90 km/h. How far will it move in 0.25 h? A. 10 km B km C. 25 km D. 45 km E. 50 km Name: Physics I Mid Term Exam Review Multiple Choice Questions Date: Mr. Tiesler 1. A train moves at a constant velocity of 90 km/h. How far will it move in 0.25 h? A. 10 km B. 22.5 km C. 25 km D. 45 km

More information

Quiz 3 July 31, 2007 Chapters 16, 17, 18, 19, 20 Phys 631 Instructor R. A. Lindgren 9:00 am 12:00 am

Quiz 3 July 31, 2007 Chapters 16, 17, 18, 19, 20 Phys 631 Instructor R. A. Lindgren 9:00 am 12:00 am Quiz 3 July 31, 2007 Chapters 16, 17, 18, 19, 20 Phys 631 Instructor R. A. Lindgren 9:00 am 12:00 am No Books or Notes allowed Calculator without access to formulas allowed. The quiz has two parts. The

More information

PHYSICS 221, FALL 2010 FINAL EXAM MONDAY, DECEMBER 13, 2010

PHYSICS 221, FALL 2010 FINAL EXAM MONDAY, DECEMBER 13, 2010 PHYSICS 221, FALL 2010 FINAL EXAM MONDAY, DECEMBER 13, 2010 Name (printed): Nine-digit ID Number: Section Number: Recitation Instructor: INSTRUCTIONS: i. Put away all materials except for pens, pencils,

More information

BLOW UP SYLLABUS I PUC PHYSICS - 33 (THEORY)

BLOW UP SYLLABUS I PUC PHYSICS - 33 (THEORY) BLOW UP SYLLABUS I PUC PHYSICS - 33 (THEORY) UNIT-I Chapter 1: PHYSICAL WORLD (2 hours) Physics: Scope and excitement of physics - Physics, technology and society - Mention of fundamental forces in nature

More information