Errata to LINEAR CIRCUITS, VOL1 DECARLO/LIN, EDITION 3 CHAPTERS 1 11 (updated 8/23/10)

Size: px
Start display at page:

Download "Errata to LINEAR CIRCUITS, VOL1 DECARLO/LIN, EDITION 3 CHAPTERS 1 11 (updated 8/23/10)"

Transcription

1 Errata to LINEAR CIRCUITS, VOL1 DECARLO/LIN, EDITION 3 CHAPTERS 1 11 (updated 8/23/10) page location correction 42 Ch1, P1, statement (e) Figure P.1.3b should be Figure P.1.1b 46 Ch1, P19, statement (c) 500 feet should be 1000 feet 97 Ch2, P35, ANSWER (c) should be (d) 98 Ch2, P39, statement Figure P2.38 should be Figure P Ch2, P40, CHECK V in =120 V should be V in =360 V 100 Ch2, P48, figure In Circuit 1, R eq be R eq1 102 Ch2, P56, figure Change 5Ω to R s 103 Ch3, P5, statement (c) should be (d); (d) should be (e) 143 Ch3, P7, statement Figure P3.6 should be Figure P Ch3, P15, statement (e) 0.4S should G Ch4, P13, ANSWERS 2R should be 6R; 1.5R should be 3R 185 Ch4, P26, ANSWERS V should V s 218 Ch5, P13, statement (a) Remove (t) 218 Ch5, P13, figure Mark i out at the 10Ω resistor, left to right 218 Ch5, P14, ANSWER 0.6A should be 90 watts 219 Ch5, P18, figure Change i s3 to i s4 ; Marki s3 at top source 260 Ch6, P13, ANSWER 10 should Ch6, P22, statement Delete (b) 263 Ch6, P33, figure Change 100 kω to 100Ω; 900 kω to 900Ω 268 Ch6, P53, figure V-source is I-source with up arrow 268 Ch6, P56, figure (b) left 0.2 should be Ch7, P15, statement (b) 0.25 should be Ch7, P21, statement (b) (c) should be (d); second (b) should be (c) 367 Ch8, P7, statement (a) i L should be v C 373 Ch8, P38, statement 0.5 should be Ch8, P39, statement Add: But plot from 0 to 6 seconds 374 Ch8, P43, statement a capacitor should be an inductor 375 Ch8, P48, statement Unit for V in is mv 420 Ch9, P14, figure Replace 100 nf by the letter C 423 Ch9, P30, statement Change 40 ms to 400 ms 424 Ch9, P35, statement (a) Change 20 Ω to 2Ω

2 424 Ch9, P36, figure and statement (d) Reverse the direction of the arrow for i L (t); Delete The sum. Why? 425 Ch9, P45, statement (a) ma should be A 425 Ch9, P47, statement (a) ma should A 426 Ch9, P49, figure Replace 5V by the letters V s2 426 Ch9, P50, statement Add: Plot for 0 t 10 ms 426 Ch9, P52, statement Change values: L = 5/12 H, C = 25 mf 426 Ch9, P53, statement (d) For (b), plot for 0 t 2 s 426 Ch9, P49, figure Replace: 5V by V s2 ; i s (t) by i s1 (t). Also replace element values by R, C and L. 427 Ch9, P55, statement (g) For t 2 should be for t Ch9, P67, statement (a) Delete and ω n 485 Ch10, P13, figure i s should be i s1 ; v s should be v s2 485 Ch10, P16, figure i in should be i Ch10, P24, statement (b) 0.25 H should be 0.2 H 490 Ch10, P43, statement Add v s (t)= 12 cos(400t) V 490 Ch10, P44, ANSWER 100t should be 1000t 490 Ch10, P45, ANSWER 2000t should be 1000t 490 Ch10, P46, ANSWER 8 2cos(100πt+135 o ) should be -16 cos(100πt) 494 Ch10, P64, statement Delete and determine.. maximum value 497 Ch10, P77, statement Delete (a) 516 Ch11, Example j5.6 should be 13.1 j Ch11, P26, statement 0.8 should be Ch11, P28, answer Change to ; to Ch11, P29, statement (h)(ii) 0.94 should be Ch11, P32, answer 250 W should be 4000W 541 Ch11, P37, statement (b) Change transfer to transfer and find P max 541 Ch11, P38, statement j1000 should be j1000

3 Errata to LINEAR CIRCUITS (updated 10/29/10) DECARLO/LIN, edition 3, Chapters (errata to be completed) page location correction 546 Equations ,3 Lowes case c should be upper case C 564 Table 12.1 item 3 r(t) should be Kr(t) 564 Table 12.1 item 5 1/s + a should be 1/(s + a) 573 Equation Rectangle should be = 581 Line 5 should be = 585 Line and should be and 589 Figure Add right arrow to i s ; add left arrow to i f 597 Ch12, P26, statement exp(-t)u(-t) should be exp(t)u(-t) 598 Ch12, P32 Inadvertently left out by the authors 599 Ch12, P36, CHECK (a) -3 should be Ch12, P41, statement (b) should be s 602 Ch12, P50, statement (c) v C (0 - )= C (0 - )= 0 should be v C (0 - )=v C (0 - )= Ch13, P35, statement (b) L s should be Y s 667 Ch13, P38, statement(c) "dt" should be "t, H" 671 C13, P52, statement (c) second V C (s) and V in (s) should be V s (s) 673 Ch13, P56, figure 20 mh should be 0.3 H 674 Ch13, P63, statement 12 V dc should be 12 V for t Ch13, P63, check Second term should be K 2 u(t) 676 Ch13, P69, statement R s = 8Ω should be R s = 2Ω 677 Ch13, P74, statement R o should be V o 678 Ch13, P77, Check CHECK: Should be v out (t) = [1.846exp(-2.5t) exp(-t/3)]u(t) 678 Ch13, P80, statement (b) 10 mf should be 10 µf 679 Ch13, P83, check 7.5 should be Ch14, P9, statement s = 2 should be s = Ch14, P30, answer Should be 0

4 750 Ch14, P33, statement Replace by 2 in parts (a) and (b) 751 Ch14, P39, statement Part (f), H 4 should be H Ch14, P60, answer w=0:0.01:1; should be w=[0:0.01:1]*2*pi; 758 Ch14, P65, statement (b) R B = 1.8 should be R B = Ch15, P8, statement With y(t)= should be with v(t)= 801 Ch15, P15, statement (b) f 2 (t) should be f 1 (t) 801 Ch15, P18, statement Change a > 0 to a > 0 and a b 801 Ch15, P19, statement 19.(a) should be Ch15, P20, statement (b) u(t) should be v(t); should be Ch15, P20,statement (d) Replace If by repeat (c) if 804 Ch15, P28, figure (b) Vertical axis should be labeled f 2 (t) 805 Ch15, P29, statement Replace 28 by 28(a) 807 Ch15, P39, answer Delete the answer 868 Ch16, P27, statement (c) should be (b) 868 Ch16, P29, statement Second (d) should be (e) 876 Ch16, P64, statement 0.25 should be Ch17, P12(c), statement i out (t) should be v out (t) 946 Ch17, P34, statement Second (b) should be (d) 1011 Ch18, P3, check 10 kω should be 11 kω 1011 Ch18, P4, check 1 mh should be 1 H 1011 Ch18, P5, statement (c) 200 should be Ch18, P19, statement Change 16 Ω to 32 Ω 1015 Ch18, P21, statement 0.8 should be 0.8 F 1016 Ch18, P24 statement (g) t 1 should be t Ch18, P31, statement Delete the second (repeated) label (b) 1021 Ch18, P42, satement Labels (c)(d) (e) should be (b)(c) (d) 1023 Ch18, P47, statement Combine (c) &(d) into (c); change (e) to (d); change (f) to (e); to RL should be to the amplifier 1023 Ch18, P48, answer Change: 2.4 to 2; to ; to Ch18, P52, answer Delete all minus signs 1025 Ch18, P56, answers Change: 0.2 to 0.02; -1.0 to -0.1; to ; and the 3 rd matrix to

5 [0.001s s-0.1; ] 1028 Ch18, P73, statement h 12 =1 should be h 12 = Ch18, P75, statement Change resistances to R 1 =1Ω and R 2 =4Ω

6 Errata to LINEAR CIRCUITS DECARLO/LIN, EDITION 3, third printing (updated 12/22/10) Page Location Correction 743 Ch14, P8, statement (b) then v out (s) should be then v out (t) 749 Ch14, P30, statement Replace V. by V. Also find the zreostate response. 750 Ch14, P33, statement (a) Replace. by, and ω = 2 rad/sec. 753 Ch14, P44, answer should be Ch14, P60, answer 0: 0.01 : 1 should be 0: 0.01: π 758 Ch 14, P65, statement (b) 1.8 should be Ch14, P81, statement (d) armature should be armature current 1015 Ch18, P23, statement Delete ms and then change Suppose to Suppose, in ms 1016 Ch18, P24, statement (e) 0.25 should be 0.25 sec 1016 Ch18, P24, statement (g) 1 should be 0.25 sec 1017 Ch18, P27, figure 1:4 should be 1:a 1017 Ch18, P31, statement (c) should be (d); 2 nd (b) should be (c) 1021 Ch18, P42, statement P18.32 should be P18.42; Labels (a) (c) (d) (e) should be (a) (b) (c) (d) 1023 Ch18, P47, statement (f) the load should be R L ; to R L should be the amplifier, V 1 I Ch18, P48, answer Change: 2.4 to 2; to ; to Ch18, P56, statement -0.5 H should be 0.5 H 1025 Ch18, P56, answer (a) In the 1st matrix, change 0.2 to 0.02; In the 2nd matrix, change 1.0 to 0.1; and 0.01 to In the 3rd matrix, change 4 to 1; to ; 0.01 to Ch18, P56, answer (b) Replace the original answer (b) by (b) i 1a (t) = cos(100t o ) A.

7 i 1b (t) = cos(100t o ) A Ch18, P74, statement P18.74 should be P18.74a 1029 Ch18, P74, answer Replace the original answer (b) by (b) v 1,ss (t) = cos(500t! 90 o ) = sin(500t)!V 1112 Ch 20, P14, statement 5000 should be 10, Ch20, P22, statement (a) 8(0.5) t should be 8(0.5 )(t-1) 1117 Ch20, P23, statement (b) should be 20.4

Figure Circuit for Question 1. Figure Circuit for Question 2

Figure Circuit for Question 1. Figure Circuit for Question 2 Exercises 10.7 Exercises Multiple Choice 1. For the circuit of Figure 10.44 the time constant is A. 0.5 ms 71.43 µs 2, 000 s D. 0.2 ms 4 Ω 2 Ω 12 Ω 1 mh 12u 0 () t V Figure 10.44. Circuit for Question

More information

Physics 116A Notes Fall 2004

Physics 116A Notes Fall 2004 Physics 116A Notes Fall 2004 David E. Pellett Draft v.0.9 Notes Copyright 2004 David E. Pellett unless stated otherwise. References: Text for course: Fundamentals of Electrical Engineering, second edition,

More information

Circuits Practice Websheet 18.1

Circuits Practice Websheet 18.1 Circuits Practice Websheet 18.1 Multiple Choice Identify the choice that best completes the statement or answers the question. 1. How much power is being dissipated by one of the 10-Ω resistors? a. 24

More information

UNIVERSITY OF UTAH ELECTRICAL & COMPUTER ENGINEERING DEPARTMENT. 10k. 3mH. 10k. Only one current in the branch:

UNIVERSITY OF UTAH ELECTRICAL & COMPUTER ENGINEERING DEPARTMENT. 10k. 3mH. 10k. Only one current in the branch: UNIVERSITY OF UTAH ELECTRICAL & COMPUTER ENGINEERING DEPARTMENT ECE 1270 HOMEWORK #6 Solution Summer 2009 1. After being closed a long time, the switch opens at t = 0. Find i(t) 1 for t > 0. t = 0 10kΩ

More information

EE105 Fall 2014 Microelectronic Devices and Circuits

EE105 Fall 2014 Microelectronic Devices and Circuits EE05 Fall 204 Microelectronic Devices and Circuits Prof. Ming C. Wu wu@eecs.berkeley.edu 5 Sutardja Dai Hall (SDH) Terminal Gain and I/O Resistances of BJT Amplifiers Emitter (CE) Collector (CC) Base (CB)

More information

Sinusoidal Response of RLC Circuits

Sinusoidal Response of RLC Circuits Sinusoidal Response of RLC Circuits Series RL circuit Series RC circuit Series RLC circuit Parallel RL circuit Parallel RC circuit R-L Series Circuit R-L Series Circuit R-L Series Circuit Instantaneous

More information

EE313 Fall 2013 Exam #1 (100 pts) Thursday, September 26, 2013 Name. 1) [6 pts] Convert the following time-domain circuit to the RMS Phasor Domain.

EE313 Fall 2013 Exam #1 (100 pts) Thursday, September 26, 2013 Name. 1) [6 pts] Convert the following time-domain circuit to the RMS Phasor Domain. Name If you have any questions ask them. Remember to include all units on your answers (V, A, etc). Clearly indicate your answers. All angles must be in the range 0 to +180 or 0 to 180 degrees. 1) [6 pts]

More information

Solved Problems. Electric Circuits & Components. 1-1 Write the KVL equation for the circuit shown.

Solved Problems. Electric Circuits & Components. 1-1 Write the KVL equation for the circuit shown. Solved Problems Electric Circuits & Components 1-1 Write the KVL equation for the circuit shown. 1-2 Write the KCL equation for the principal node shown. 1-2A In the DC circuit given in Fig. 1, find (i)

More information

Analog Circuit Design Discrete & Integrated

Analog Circuit Design Discrete & Integrated This document contains the Errata for the textbook Analog Circuit Design Discrete & Integrated The Hardcover Edition (shown below at the left and published by McGraw-Hill Education) was preceded by a Spiral-Bound

More information

ENGG Fundamentals of Electrical Circuits and Machines Final Examination

ENGG Fundamentals of Electrical Circuits and Machines Final Examination Name: Lecture Section: ID#: ENGG 225 - Fundamentals of Electrical Circuits and Machines Final Examination Thursday, April 17, 2014 Time: 8:00-11:00 AM Red Gymnasium (L01-L03) Auxiliary Gymnasium (L04)

More information

ECE Circuit Theory. Final Examination. December 5, 2008

ECE Circuit Theory. Final Examination. December 5, 2008 ECE 212 H1F Pg 1 of 12 ECE 212 - Circuit Theory Final Examination December 5, 2008 1. Policy: closed book, calculators allowed. Show all work. 2. Work in the provided space. 3. The exam has 3 problems

More information

ECE-202 FINAL April 30, 2018 CIRCLE YOUR DIVISION

ECE-202 FINAL April 30, 2018 CIRCLE YOUR DIVISION ECE 202 Final, Spring 8 ECE-202 FINAL April 30, 208 Name: (Please print clearly.) Student Email: CIRCLE YOUR DIVISION DeCarlo- 7:30-8:30 DeCarlo-:30-2:45 2025 202 INSTRUCTIONS There are 34 multiple choice

More information

8 sin 3 V. For the circuit given, determine the voltage v for all time t. Assume that no energy is stored in the circuit before t = 0.

8 sin 3 V. For the circuit given, determine the voltage v for all time t. Assume that no energy is stored in the circuit before t = 0. For the circuit given, determine the voltage v for all time t. Assume that no energy is stored in the circuit before t = 0. Spring 2015, Exam #5, Problem #1 4t Answer: e tut 8 sin 3 V 1 For the circuit

More information

Experiment 9 Equivalent Circuits

Experiment 9 Equivalent Circuits Experiment 9 Equivalent Circuits Name: Jason Johnson Course/Section: ENGR 361-04 Date Performed: November 15, 2001 Date Submitted: November 29, 2001 In keeping with the honor code of the School of Engineering,

More information

EECE 2150 Circuits and Signals Final Exam Fall 2016 Dec 16

EECE 2150 Circuits and Signals Final Exam Fall 2016 Dec 16 EECE 2150 Circuits and Signals Final Exam Fall 2016 Dec 16 Instructions: Write your name and section number on all pages Closed book, closed notes; Computers and cell phones are not allowed You can use

More information

Possible

Possible Department of Electrical Engineering and Computer Science ENGR 21. Introduction to Circuits and Instruments (4) ENGR 21 SPRING 24 FINAL EXAMINATION given 5/4/3 Possible 1. 1 2. 1 3. 1 4. 1 5. 1 6. 1 7.

More information

Basic RL and RC Circuits R-L TRANSIENTS: STORAGE CYCLE. Engineering Collage Electrical Engineering Dep. Dr. Ibrahim Aljubouri

Basic RL and RC Circuits R-L TRANSIENTS: STORAGE CYCLE. Engineering Collage Electrical Engineering Dep. Dr. Ibrahim Aljubouri st Class Basic RL and RC Circuits The RL circuit with D.C (steady state) The inductor is short time at Calculate the inductor current for circuits shown below. I L E R A I L E R R 3 R R 3 I L I L R 3 R

More information

ECE 201 Fall 2009 Final Exam

ECE 201 Fall 2009 Final Exam ECE 01 Fall 009 Final Exam December 16, 009 Division 0101: Tan (11:30am) Division 001: Clark (7:30 am) Division 0301: Elliott (1:30 pm) Instructions 1. DO NOT START UNTIL TOLD TO DO SO.. Write your Name,

More information

EE-201 Review Exam I. 1. The voltage Vx in the circuit below is: (1) 3V (2) 2V (3) -2V (4) 1V (5) -1V (6) None of above

EE-201 Review Exam I. 1. The voltage Vx in the circuit below is: (1) 3V (2) 2V (3) -2V (4) 1V (5) -1V (6) None of above EE-201, Review Probs Test 1 page-1 Spring 98 EE-201 Review Exam I Multiple Choice (5 points each, no partial credit.) 1. The voltage Vx in the circuit below is: (1) 3V (2) 2V (3) -2V (4) 1V (5) -1V (6)

More information

Test II Michael R. Gustafson II

Test II Michael R. Gustafson II 'XNH8QLYHUVLW\ (GPXQG73UDWW-U6FKRRORI(QJLQHHULQJ EGR 224 Spring 2016 Test II Michael R. Gustafson II Name (please print) In keeping with the Community Standard, I have neither provided nor received any

More information

ELEC 2501 AB. Come to the PASS workshop with your mock exam complete. During the workshop you can work with other students to review your work.

ELEC 2501 AB. Come to the PASS workshop with your mock exam complete. During the workshop you can work with other students to review your work. It is most beneficial to you to write this mock midterm UNDER EXAM CONDITIONS. This means: Complete the midterm in 3 hour(s). Work on your own. Keep your notes and textbook closed. Attempt every question.

More information

Single Phase Parallel AC Circuits

Single Phase Parallel AC Circuits Single Phase Parallel AC Circuits 1 Single Phase Parallel A.C. Circuits (Much of this material has come from Electrical & Electronic Principles & Technology by John Bird) n parallel a.c. circuits similar

More information

Chapter 28 Solutions

Chapter 28 Solutions Chapter 8 Solutions 8.1 (a) P ( V) R becomes 0.0 W (11.6 V) R so R 6.73 Ω (b) V IR so 11.6 V I (6.73 Ω) and I 1.7 A ε IR + Ir so 15.0 V 11.6 V + (1.7 A)r r 1.97 Ω Figure for Goal Solution Goal Solution

More information

Review of DC Electric Circuit. DC Electric Circuits Examples (source:

Review of DC Electric Circuit. DC Electric Circuits Examples (source: Review of DC Electric Circuit DC Electric Circuits Examples (source: http://hyperphysics.phyastr.gsu.edu/hbase/electric/dcex.html) 1 Review - DC Electric Circuit Multisim Circuit Simulation DC Circuit

More information

ECE2262 Electric Circuit

ECE2262 Electric Circuit ECE2262 Electric Circuit Chapter 7: FIRST AND SECOND-ORDER RL AND RC CIRCUITS Response to First-Order RL and RC Circuits Response to Second-Order RL and RC Circuits 1 2 7.1. Introduction 3 4 In dc steady

More information

Electronics. Basics & Applications. group talk Daniel Biesinger

Electronics. Basics & Applications. group talk Daniel Biesinger Electronics Basics & Applications group talk 23.7.2010 by Daniel Biesinger 1 2 Contents Contents Basics Simple applications Equivalent circuit Impedance & Reactance More advanced applications - RC circuits

More information

REACTANCE. By: Enzo Paterno Date: 03/2013

REACTANCE. By: Enzo Paterno Date: 03/2013 REACTANCE REACTANCE By: Enzo Paterno Date: 03/2013 5/2007 Enzo Paterno 1 RESISTANCE - R i R (t R A resistor for all practical purposes is unaffected by the frequency of the applied sinusoidal voltage or

More information

ENGR-4300 Spring 2009 Test 2. Name: SOLUTION. Section: 1(MR 8:00) 2(TF 2:00) 3(MR 6:00) (circle one) Question I (20 points): Question II (20 points):

ENGR-4300 Spring 2009 Test 2. Name: SOLUTION. Section: 1(MR 8:00) 2(TF 2:00) 3(MR 6:00) (circle one) Question I (20 points): Question II (20 points): ENGR43 Test 2 Spring 29 ENGR43 Spring 29 Test 2 Name: SOLUTION Section: 1(MR 8:) 2(TF 2:) 3(MR 6:) (circle one) Question I (2 points): Question II (2 points): Question III (17 points): Question IV (2 points):

More information

MAE106 Homework 2 - Solution DC Motors & Intro to the frequency domain

MAE106 Homework 2 - Solution DC Motors & Intro to the frequency domain MAE06 Homework 2 - Solution DC Motors & Intro to the frequency domain University of California, Irvine Department of Mechanical and Aerospace Engineering Problem You are given the circuit shown in Figure.

More information

Introduction to AC Circuits (Capacitors and Inductors)

Introduction to AC Circuits (Capacitors and Inductors) Introduction to AC Circuits (Capacitors and Inductors) Amin Electronics and Electrical Communications Engineering Department (EECE) Cairo University elc.n102.eng@gmail.com http://scholar.cu.edu.eg/refky/

More information

Small Signal Model. S. Sivasubramani EE101- Small Signal - Diode

Small Signal Model. S. Sivasubramani EE101- Small Signal - Diode Small Signal Model i v Small Signal Model i I D i d i D v d v D v V D Small Signal Model -Mathematical Analysis V D - DC value v d - ac signal v D - Total signal (DC ac signal) Diode current and voltage

More information

MICROELECTRONIC CIRCUIT DESIGN Second Edition

MICROELECTRONIC CIRCUIT DESIGN Second Edition MICROELECTRONIC CIRCUIT DESIGN Second Edition Richard C. Jaeger and Travis N. Blalock Answers to Selected Problems Updated 10/23/06 Chapter 1 1.3 1.52 years, 5.06 years 1.5 2.00 years, 6.65 years 1.8 113

More information

RLC Series Circuit. We can define effective resistances for capacitors and inductors: 1 = Capacitive reactance:

RLC Series Circuit. We can define effective resistances for capacitors and inductors: 1 = Capacitive reactance: RLC Series Circuit In this exercise you will investigate the effects of changing inductance, capacitance, resistance, and frequency on an RLC series AC circuit. We can define effective resistances for

More information

AC Circuits Homework Set

AC Circuits Homework Set Problem 1. In an oscillating LC circuit in which C=4.0 μf, the maximum potential difference across the capacitor during the oscillations is 1.50 V and the maximum current through the inductor is 50.0 ma.

More information

EECE 2510 Circuits and Signals, Biomedical Applications Final Exam Section 3. Name:

EECE 2510 Circuits and Signals, Biomedical Applications Final Exam Section 3. Name: EECE 2510 Circuits and Signals, Biomedical Applications Final Exam Section 3 Instructions: Closed book, closed notes; Computers and cell phones are not allowed Scientific calculators are allowed Complete

More information

ET4119 Electronic Power Conversion 2011/2012 Solutions 27 January 2012

ET4119 Electronic Power Conversion 2011/2012 Solutions 27 January 2012 ET4119 Electronic Power Conversion 2011/2012 Solutions 27 January 2012 1. In the single-phase rectifier shown below in Fig 1a., s = 1mH and I d = 10A. The input voltage v s has the pulse waveform shown

More information

This document contains the Errata for Design with Op Amps and Analog ICs.

This document contains the Errata for Design with Op Amps and Analog ICs. This document contains the Errata for Design with Op Amps and Analog ICs. The Errata are shown for the 4 th Edition, 3 rd Edition, and nd Edition, as follows: For the 4 th Edition Errata, scroll down to

More information

Source-Free RC Circuit

Source-Free RC Circuit First Order Circuits Source-Free RC Circuit Initial charge on capacitor q = Cv(0) so that voltage at time 0 is v(0). What is v(t)? Prof Carruthers (ECE @ BU) EK307 Notes Summer 2018 150 / 264 First Order

More information

EE 3CL4: Introduction to Control Systems Lab 4: Lead Compensation

EE 3CL4: Introduction to Control Systems Lab 4: Lead Compensation EE 3CL4: Introduction to Control Systems Lab 4: Lead Compensation Tim Davidson Ext. 27352 davidson@mcmaster.ca Objective To use the root locus technique to design a lead compensator for a marginally-stable

More information

[1] (b) Fig. 1.1 shows a circuit consisting of a resistor and a capacitor of capacitance 4.5 μf. Fig. 1.1

[1] (b) Fig. 1.1 shows a circuit consisting of a resistor and a capacitor of capacitance 4.5 μf. Fig. 1.1 1 (a) Define capacitance..... [1] (b) Fig. 1.1 shows a circuit consisting of a resistor and a capacitor of capacitance 4.5 μf. S 1 S 2 6.3 V 4.5 μf Fig. 1.1 Switch S 1 is closed and switch S 2 is left

More information

To find the step response of an RC circuit

To find the step response of an RC circuit To find the step response of an RC circuit v( t) v( ) [ v( t) v( )] e tt The time constant = RC The final capacitor voltage v() The initial capacitor voltage v(t ) To find the step response of an RL circuit

More information

Louisiana State University Physics 2102, Exam 3 April 2nd, 2009.

Louisiana State University Physics 2102, Exam 3 April 2nd, 2009. PRINT Your Name: Instructor: Louisiana State University Physics 2102, Exam 3 April 2nd, 2009. Please be sure to PRINT your name and class instructor above. The test consists of 4 questions (multiple choice),

More information

Control Systems Engineering (Chapter 2. Modeling in the Frequency Domain) Prof. Kwang-Chun Ho Tel: Fax:

Control Systems Engineering (Chapter 2. Modeling in the Frequency Domain) Prof. Kwang-Chun Ho Tel: Fax: Control Systems Engineering (Chapter 2. Modeling in the Frequency Domain) Prof. Kwang-Chun Ho kwangho@hansung.ac.kr Tel: 02-760-4253 Fax:02-760-4435 Overview Review on Laplace transform Learn about transfer

More information

ECE-343 Test 2: Mar 21, :00-8:00, Closed Book. Name : SOLUTION

ECE-343 Test 2: Mar 21, :00-8:00, Closed Book. Name : SOLUTION ECE-343 Test 2: Mar 21, 2012 6:00-8:00, Closed Book Name : SOLUTION 1. (25 pts) (a) Draw a circuit diagram for a differential amplifier designed under the following constraints: Use only BJTs. (You may

More information

EE-202 Exam III April 6, 2017

EE-202 Exam III April 6, 2017 EE-202 Exam III April 6, 207 Name: (Please print clearly.) Student ID: CIRCLE YOUR DIVISION DeCarlo--202 DeCarlo--2022 7:30 MWF :30 T-TH INSTRUCTIONS There are 3 multiple choice worth 5 points each and

More information

Problem Set 4 Solutions

Problem Set 4 Solutions University of California, Berkeley Spring 212 EE 42/1 Prof. A. Niknejad Problem Set 4 Solutions Please note that these are merely suggested solutions. Many of these problems can be approached in different

More information

Mod. Sim. Dyn. Sys. Amplifiers page 1

Mod. Sim. Dyn. Sys. Amplifiers page 1 AMPLIFIERS A circuit containing only capacitors, amplifiers (transistors) and resistors may resonate. A circuit containing only capacitors and resistors may not. Why does amplification permit resonance

More information

ELECTROMAGNETIC OSCILLATIONS AND ALTERNATING CURRENT

ELECTROMAGNETIC OSCILLATIONS AND ALTERNATING CURRENT Chapter 31: ELECTROMAGNETIC OSCILLATIONS AND ALTERNATING CURRENT 1 A charged capacitor and an inductor are connected in series At time t = 0 the current is zero, but the capacitor is charged If T is the

More information

ECE 523/421 - Analog Electronics University of New Mexico Solutions Homework 3

ECE 523/421 - Analog Electronics University of New Mexico Solutions Homework 3 ECE 523/42 - Analog Electronics University of New Mexico Solutions Homework 3 Problem 7.90 Show that when ro is taken into account, the voltage gain of the source follower becomes G v v o v sig R L r o

More information

Errata for Bioelectricity: A Quantitative Approach, 3rd edition by Robert Plonsey and Roger C. Barr (Springer 2007)

Errata for Bioelectricity: A Quantitative Approach, 3rd edition by Robert Plonsey and Roger C. Barr (Springer 2007) Errata for Bioelectricity: A Quantitative Approach, 3rd edition by Robert Plonsey and Roger C. Barr (Springer 2007) Frederick J. Vetter Department of Electrical, Computer and Biomedical Engineering University

More information

Mod. Sim. Dyn. Sys. Amplifiers page 1

Mod. Sim. Dyn. Sys. Amplifiers page 1 AMPLIFIERS A circuit containing only capacitors, amplifiers (transistors) and resistors may resonate. A circuit containing only capacitors and resistors may not. Why does amplification permit resonance

More information

EECE 2150 Circuits and Signals Final Exam Fall 2016 Dec 9

EECE 2150 Circuits and Signals Final Exam Fall 2016 Dec 9 EECE 2150 Circuits and Signals Final Exam Fall 2016 Dec 9 Name: Instructions: Write your name and section number on all pages Closed book, closed notes; Computers and cell phones are not allowed You can

More information

Physics 2112 Unit 19

Physics 2112 Unit 19 Physics 11 Unit 19 Today s oncepts: A) L circuits and Oscillation Frequency B) Energy ) RL circuits and Damping Electricity & Magnetism Lecture 19, Slide 1 Your omments differential equations killing me.

More information

UNIT I Introduction to DC and AC circuits

UNIT I Introduction to DC and AC circuits SIDDHARTH GROUP OF INSTITUTIONS :: PUTTUR Siddharth Nagar, Narayanavanam Road 517583 QUESTION BANK (DESCRIPTIVE) Subject with Code : EMT (15A01301) Year & Sem: II-B.Tech & I-Sem Course & Branch: B.Tech

More information

Exam 2 Solutions. Answer: 3.0 W Solution: The total current is in the series circuit is 1 A, so the power dissipated in R 2 is i 2 R 2

Exam 2 Solutions. Answer: 3.0 W Solution: The total current is in the series circuit is 1 A, so the power dissipated in R 2 is i 2 R 2 Exam 2 Solutions Prof. Pradeep Kumar Prof. Paul Avery Mar. 21, 2012 1. A portable CD player does not have a power rating listed, but it has a label stating that it draws a maximum current of 159.0 ma.

More information

Physics 2135 Exam 2 October 20, 2015

Physics 2135 Exam 2 October 20, 2015 Exam Total / 200 Physics 2135 Exam 2 October 20, 2015 Printed Name: Rec. Sec. Letter: Five multiple choice questions, 8 points each. Choose the best or most nearly correct answer. 1. A straight wire segment

More information

Supplementary Information: Noise-assisted energy transport in electrical oscillator networks with off-diagonal dynamical disorder

Supplementary Information: Noise-assisted energy transport in electrical oscillator networks with off-diagonal dynamical disorder Supplementary Information: Noise-assisted energy transport in electrical oscillator networks with off-diagonal dynamical disorder oberto de J. León-Montiel, Mario A. Quiroz-Juárez, afael Quintero-Torres,

More information

Chapter 28 Direct Current Circuits

Chapter 28 Direct Current Circuits Chapter 28 Direct Current Circuits Multiple Choice 1. t what rate is thermal energy being generated in the 2-resistor when = 12 V and = 3.0 Ω? 2 a. 12 W b. 24 W c. 6.0 W d. 3.0 W e. 1.5 W 2. t what rate

More information

Response of Second-Order Systems

Response of Second-Order Systems Unit 3 Response of SecondOrder Systems In this unit, we consider the natural and step responses of simple series and parallel circuits containing inductors, capacitors and resistors. The equations which

More information

CURRENT SOURCES EXAMPLE 1 Find the source voltage Vs and the current I1 for the circuit shown below SOURCE CONVERSIONS

CURRENT SOURCES EXAMPLE 1 Find the source voltage Vs and the current I1 for the circuit shown below SOURCE CONVERSIONS CURRENT SOURCES EXAMPLE 1 Find the source voltage Vs and the current I1 for the circuit shown below EXAMPLE 2 Find the source voltage Vs and the current I1 for the circuit shown below SOURCE CONVERSIONS

More information

M. C. Escher: Waterfall. 18/9/2015 [tsl425 1/29]

M. C. Escher: Waterfall. 18/9/2015 [tsl425 1/29] M. C. Escher: Waterfall 18/9/2015 [tsl425 1/29] Direct Current Circuit Consider a wire with resistance R = ρl/a connected to a battery. Resistor rule: In the direction of I across a resistor with resistance

More information

CHAPTER 6. Inductance, Capacitance, and Mutual Inductance

CHAPTER 6. Inductance, Capacitance, and Mutual Inductance CHAPTER 6 Inductance, Capacitance, and Mutual Inductance 6.1 The Inductor Inductance is symbolized by the letter L, is measured in henrys (H), and is represented graphically as a coiled wire. The inductor

More information

Experiment Guide for RC Circuits

Experiment Guide for RC Circuits Guide-P1 Experiment Guide for RC Circuits I. Introduction 1. Capacitors A capacitor is a passive electronic component that stores energy in the form of an electrostatic field. The unit of capacitance is

More information

Electric Circuits Fall 2015 Solution #5

Electric Circuits Fall 2015 Solution #5 RULES: Please try to work on your own. Discussion is permissible, but identical submissions are unacceptable! Please show all intermeate steps: a correct solution without an explanation will get zero cret.

More information

Lecture 37: Frequency response. Context

Lecture 37: Frequency response. Context EECS 05 Spring 004, Lecture 37 Lecture 37: Frequency response Prof J. S. Smith EECS 05 Spring 004, Lecture 37 Context We will figure out more of the design parameters for the amplifier we looked at in

More information

Sinusoidal Steady State Analysis

Sinusoidal Steady State Analysis Sinusoidal Steady State Analysis 9 Assessment Problems AP 9. [a] V = 70/ 40 V [b] 0 sin(000t +20 ) = 0 cos(000t 70 ).. I = 0/ 70 A [c] I =5/36.87 + 0/ 53.3 =4+j3+6 j8 =0 j5 =.8/ 26.57 A [d] sin(20,000πt

More information

Transient response of RC and RL circuits ENGR 40M lecture notes July 26, 2017 Chuan-Zheng Lee, Stanford University

Transient response of RC and RL circuits ENGR 40M lecture notes July 26, 2017 Chuan-Zheng Lee, Stanford University Transient response of C and L circuits ENG 40M lecture notes July 26, 2017 Chuan-Zheng Lee, Stanford University esistor capacitor (C) and resistor inductor (L) circuits are the two types of first-order

More information

The RLC circuits have a wide range of applications, including oscillators and frequency filters

The RLC circuits have a wide range of applications, including oscillators and frequency filters 9. The RL ircuit The RL circuits have a wide range of applications, including oscillators and frequency filters This chapter considers the responses of RL circuits The result is a second-order differential

More information

'XNH8QLYHUVLW\ (GPXQG73UDWW-U6FKRRORI(QJLQHHULQJ. EGR 224 Spring Test II. Michael R. Gustafson II

'XNH8QLYHUVLW\ (GPXQG73UDWW-U6FKRRORI(QJLQHHULQJ. EGR 224 Spring Test II. Michael R. Gustafson II 'XNH8QLYHUVLW\ (GPXQG73UDWW-U6FKRRORI(QJLQHHULQJ EGR 224 Spring 2017 Test II Michael R. Gustafson II Name (please print) In keeping with the Community Standard, I have neither provided nor received any

More information

E40M Review - Part 1

E40M Review - Part 1 E40M Review Part 1 Topics in Part 1 (Today): KCL, KVL, Power Devices: V and I sources, R Nodal Analysis. Superposition Devices: Diodes, C, L Time Domain Diode, C, L Circuits Topics in Part 2 (Wed): MOSFETs,

More information

Alternating Current Circuits. Home Work Solutions

Alternating Current Circuits. Home Work Solutions Chapter 21 Alternating Current Circuits. Home Work s 21.1 Problem 21.11 What is the time constant of the circuit in Figure (21.19). 10 Ω 10 Ω 5.0 Ω 2.0µF 2.0µF 2.0µF 3.0µF Figure 21.19: Given: The circuit

More information

The next two questions pertain to the situation described below. Consider a parallel plate capacitor with separation d:

The next two questions pertain to the situation described below. Consider a parallel plate capacitor with separation d: PHYS 102 Exams Exam 2 PRINT (A) The next two questions pertain to the situation described below. Consider a parallel plate capacitor with separation d: It is connected to a battery with constant emf V.

More information

EE 3120 Electric Energy Systems Study Guide for Prerequisite Test Wednesday, Jan 18, pm, Room TBA

EE 3120 Electric Energy Systems Study Guide for Prerequisite Test Wednesday, Jan 18, pm, Room TBA EE 3120 Electric Energy Systems Study Guide for Prerequisite Test Wednesday, Jan 18, 2006 6-7 pm, Room TBA First retrieve your EE2110 final and other course papers and notes! The test will be closed book

More information

MODULE-4 RESONANCE CIRCUITS

MODULE-4 RESONANCE CIRCUITS Introduction: MODULE-4 RESONANCE CIRCUITS Resonance is a condition in an RLC circuit in which the capacitive and inductive Reactance s are equal in magnitude, there by resulting in purely resistive impedance.

More information

Charge The most basic quantity in an electric circuit is the electric charge. Charge is an electrical property of the atomic particles of which matter

Charge The most basic quantity in an electric circuit is the electric charge. Charge is an electrical property of the atomic particles of which matter Basic Concepts of DC Circuits Introduction An electric circuit is an interconnection of electrical elements. Systems of Units 1 Charge The most basic quantity in an electric circuit is the electric charge.

More information

ENGG Fundamentals of Electrical Circuits and Machines Final Examination

ENGG Fundamentals of Electrical Circuits and Machines Final Examination Name: Lecture Section: ID#: ENGG 225 - Fundamentals of Electrical Circuits and Machines Final Examination Monday, April 22, 2013 Time: 12:00-3:00 PM Red and Gold Gymnasium L01 - Anis Haque L02 - Norm Bartley

More information

Kirchhoff's Laws and Circuit Analysis (EC 2)

Kirchhoff's Laws and Circuit Analysis (EC 2) Kirchhoff's Laws and Circuit Analysis (EC ) Circuit analysis: solving for I and V at each element Linear circuits: involve resistors, capacitors, inductors Initial analysis uses only resistors Power sources,

More information

Ver 3537 E1.1 Analysis of Circuits (2014) E1.1 Circuit Analysis. Problem Sheet 1 (Lectures 1 & 2)

Ver 3537 E1.1 Analysis of Circuits (2014) E1.1 Circuit Analysis. Problem Sheet 1 (Lectures 1 & 2) Ver 3537 E. Analysis of Circuits () Key: [A]= easy... [E]=hard E. Circuit Analysis Problem Sheet (Lectures & ). [A] One of the following circuits is a series circuit and the other is a parallel circuit.

More information

ECE-342 Test 3: Nov 30, :00-8:00, Closed Book. Name : Solution

ECE-342 Test 3: Nov 30, :00-8:00, Closed Book. Name : Solution ECE-342 Test 3: Nov 30, 2010 6:00-8:00, Closed Book Name : Solution All solutions must provide units as appropriate. Unless otherwise stated, assume T = 300 K. 1. (25 pts) Consider the amplifier shown

More information

9. M = 2 π R µ 0 n. 3. M = π R 2 µ 0 n N correct. 5. M = π R 2 µ 0 n. 8. M = π r 2 µ 0 n N

9. M = 2 π R µ 0 n. 3. M = π R 2 µ 0 n N correct. 5. M = π R 2 µ 0 n. 8. M = π r 2 µ 0 n N This print-out should have 20 questions. Multiple-choice questions may continue on the next column or page find all choices before answering. 00 0.0 points A coil has an inductance of 4.5 mh, and the current

More information

Sinusoidal Steady State Analysis (AC Analysis) Part I

Sinusoidal Steady State Analysis (AC Analysis) Part I Sinusoidal Steady State Analysis (AC Analysis) Part I Amin Electronics and Electrical Communications Engineering Department (EECE) Cairo University elc.n102.eng@gmail.com http://scholar.cu.edu.eg/refky/

More information

2. Basic Components and Electrical Circuits

2. Basic Components and Electrical Circuits 1 2. Basic Components and Electrical Circuits 2.1 Units and Scales The International System of Units (SI) defines 6 principal units from which the units of all other physical quantities can be derived

More information

Conceptually, a capacitor consists of two conducting plates. Capacitors: Concept

Conceptually, a capacitor consists of two conducting plates. Capacitors: Concept apacitors and Inductors Overview Defining equations Key concepts and important properties Series and parallel equivalents Integrator Differentiator Portland State University EE 221 apacitors and Inductors

More information

General Physics (PHY 2140)

General Physics (PHY 2140) General Physics (PHY 2140) Lecture 10 6/12/2007 Electricity and Magnetism Induced voltages and induction Self-Inductance RL Circuits Energy in magnetic fields AC circuits and EM waves Resistors, capacitors

More information

EE221 - Practice for the Midterm Exam

EE221 - Practice for the Midterm Exam EE1 - Practice for the Midterm Exam 1. Consider this circuit and corresponding plot of the inductor current: Determine the values of L, R 1 and R : L = H, R 1 = Ω and R = Ω. Hint: Use the plot to determine

More information

Inductance, RL and RLC Circuits

Inductance, RL and RLC Circuits Inductance, RL and RLC Circuits Inductance Temporarily storage of energy by the magnetic field When the switch is closed, the current does not immediately reach its maximum value. Faraday s law of electromagnetic

More information

EECE 2150 Circuits and Signals Final Exam Fall 2016 Dec 12

EECE 2150 Circuits and Signals Final Exam Fall 2016 Dec 12 EECE 2150 Circuits and Signals Final Exam Fall 2016 Dec 12 Instructions: Write your name and section number on all pages Closed book, closed notes; Computers and cell phones are not allowed You can use

More information

Circuit Analysis-III. Circuit Analysis-II Lecture # 3 Friday 06 th April, 18

Circuit Analysis-III. Circuit Analysis-II Lecture # 3 Friday 06 th April, 18 Circuit Analysis-III Sinusoids Example #1 ü Find the amplitude, phase, period and frequency of the sinusoid: v (t ) =12cos(50t +10 ) Signal Conversion ü From sine to cosine and vice versa. ü sin (A ± B)

More information

Inductors. Hydraulic analogy Duality with capacitor Charging and discharging. Lecture 12: Inductors

Inductors. Hydraulic analogy Duality with capacitor Charging and discharging. Lecture 12: Inductors Lecture 12: nductors nductors Hydraulic analogy Duality with capacitor Charging and discharging Robert R. McLeod, University of Colorado http://hilaroad.com/camp/projects/magnet.html 99 Lecture 12: nductors

More information

ELECTRONICS E # 1 FUNDAMENTALS 2/2/2011

ELECTRONICS E # 1 FUNDAMENTALS 2/2/2011 FE Review 1 ELECTRONICS E # 1 FUNDAMENTALS Electric Charge 2 In an electric circuit it there is a conservation of charge. The net electric charge is constant. There are positive and negative charges. Like

More information

MCE380: Measurements and Instrumentation Lab. Chapter 5: Electromechanical Transducers

MCE380: Measurements and Instrumentation Lab. Chapter 5: Electromechanical Transducers MCE380: Measurements and Instrumentation Lab Chapter 5: Electromechanical Transducers Part I Topics: Transducers and Impedance Magnetic Electromechanical Coupling Reference: Holman, CH 4. Cleveland State

More information

To receive full credit, you must show all your work (including steps taken, calculations, and formulas used).

To receive full credit, you must show all your work (including steps taken, calculations, and formulas used). Page 1 Score Problem 1: (35 pts) Problem 2: (25 pts) Problem 3: (25 pts) Problem 4: (25 pts) Problem 5: (15 pts) TOTAL: (125 pts) To receive full credit, you must show all your work (including steps taken,

More information

University of Illinois at Chicago Spring ECE 412 Introduction to Filter Synthesis Homework #4 Solutions

University of Illinois at Chicago Spring ECE 412 Introduction to Filter Synthesis Homework #4 Solutions Problem 1 A Butterworth lowpass filter is to be designed having the loss specifications given below. The limits of the the design specifications are shown in the brick-wall characteristic shown in Figure

More information

Electric Circuits I FINAL EXAMINATION

Electric Circuits I FINAL EXAMINATION EECS:300, Electric Circuits I s6fs_elci7.fm - Electric Circuits I FINAL EXAMINATION Problems Points.. 3. 0 Total 34 Was the exam fair? yes no 5//6 EECS:300, Electric Circuits I s6fs_elci7.fm - Problem

More information

This work is licensed under a Creative Commons Attribution-Noncommercial-Share Alike 4.0 License.

This work is licensed under a Creative Commons Attribution-Noncommercial-Share Alike 4.0 License. University of Rhode Island DigitalCommons@URI PHY 204: Elementary Physics II Physics Course Materials 2015 10. Resistors II Gerhard Müller University of Rhode Island, gmuller@uri.edu Creative Commons License

More information

Consider a simple RC circuit. We might like to know how much power is being supplied by the source. We probably need to find the current.

Consider a simple RC circuit. We might like to know how much power is being supplied by the source. We probably need to find the current. AC power Consider a simple RC circuit We might like to know how much power is being supplied by the source We probably need to find the current R 10! R 10! is VS Vmcosωt Vm 10 V f 60 Hz V m 10 V C 150

More information

ECE 304: Design Issues for Voltage Follower as Output Stage S&S Chapter 14, pp

ECE 304: Design Issues for Voltage Follower as Output Stage S&S Chapter 14, pp ECE 34: Design Issues for oltage Follower as Output Stage S&S Chapter 14, pp. 131133 Introduction The voltage follower provides a good buffer between a differential amplifier and a load in two ways: 1.

More information

EE 321 Analog Electronics, Fall 2013 Homework #8 solution

EE 321 Analog Electronics, Fall 2013 Homework #8 solution EE 321 Analog Electronics, Fall 2013 Homework #8 solution 5.110. The following table summarizes some of the basic attributes of a number of BJTs of different types, operating as amplifiers under various

More information

Problem info Geometry model Labelled Objects Results Nonlinear dependencies

Problem info Geometry model Labelled Objects Results Nonlinear dependencies Problem info Problem type: Transient Magnetics (integration time: 9.99999993922529E-09 s.) Geometry model class: Plane-Parallel Problem database file names: Problem: circuit.pbm Geometry: Circuit.mod Material

More information

RLC Circuits. 1 Introduction. 1.1 Undriven Systems. 1.2 Driven Systems

RLC Circuits. 1 Introduction. 1.1 Undriven Systems. 1.2 Driven Systems RLC Circuits Equipment: Capstone, 850 interface, RLC circuit board, 4 leads (91 cm), 3 voltage sensors, Fluke mulitmeter, and BNC connector on one end and banana plugs on the other Reading: Review AC circuits

More information