Bushing Part No. XTB15 XTB20 XTB25 XTB30 XTB35 XTB40 XTB45 XTB50. Wt lbs XTB60 XTB XTB80 XTB

Size: px
Start display at page:

Download "Bushing Part No. XTB15 XTB20 XTB25 XTB30 XTB35 XTB40 XTB45 XTB50. Wt lbs XTB60 XTB XTB80 XTB"

Transcription

1 T s STOCK T BUSHINGS Part No. Stock Bores Keyseat Key Supplied TB / *, / *, / * *, /*, /*, *, /*, /* / / / / / / x / x / TB0, /, /, /, /*, * / / / x / / / / / x / x / TB, /, /,/, /, / /,, / /* / x / / / x / x TB0 /, /, / /, / /, /* /* / / x / / / / x / x TB /, / /*,/* /* /* x / x / / x / x / / x / x / TB0 / / /* /* x / / x / x / x / x / x / T BUSHING SPECIFICATIONS Dimensions Cap Screws Part No. L U H S No Size Wt lbs TB TB0 TB0 / /* /* /, / / /, / /, / x / x / x / x / x x / x / x / x / TB TB0 TB TB0 / / / / / / / / / / / / /.... TB0 TB0 /, / /, / /, / x / / x / / x / x / TB TB0 TB TB0 / / / / / / 0/ / / / / / / / / / / TB00 TB0 /, /, /, 0 0/, /, x / x / / x / x TB0 TB0 TB0 TB00 TB0 / / / / / / / / / / / / / 0 / / / / / / / / / / / *These bushings are malleable iron;all others are cast iron.

2 T Hubs Part No. For Dimensions Tapped Holes O.D. A B C V d No. Size Wt lbs. TYPE Hubs TH TH0 TH TH0 TB TB0 TB TB0 / / / / / / / / / / / / / / / / / 0UNC UNC SNC UNC... TH TH0 TH TH0 TB TB0 TB TB0 / 0 / / / / / / / / / / / / / / / / / UNC UNC UNC 0UNC.... TH0 TH0 TH0 TH00 TH0 TB0 TB0 TB0 TB00 TB0 / / / / / / / / 0/ / / / / / / / / / / / / / / UNC UNC UNC UNC UNC... TYPE Hubs THF THF THF THF TB TB TB TB / / / / / / / / / / 0UNC 0UNC 0UNC 0UNC.... TH0F TH0F TH0F TH0F0 TH0F THF THF THF0 THF TB0 TB0 TB0 TB0 TB0 TB TB TB TB / / / / / / / / / / / / / / / / / / UNC UNC UNC UNC UNC UNC UNC UNC UNC

3 Taper s Position of screw to tighten bushing For removing from shaft: Bushig half of hole threaded Hub half of hole not threaded taper inluded anlge Set screw for tightening on shaft Hub half of hole threaded half of hole not threaded Position of screw to tighten bushing For removing from shaft: Bushig half of hole threaded Hub half of hole not threaded Socket head cap screws taper inluded anlge For tightening on shaft: Hub half of hole threaded Bushig half of hole not threaded Dimensions for thru 00 TAPER s Bush.No. A B D Set Screws Dimensions for 00 thru 00 TAPER s.. / / / / / / / / / / / / / / / / x / x / x / x / x / x / x / / x/ / x/ /x /x /x /x Socket Head Bush.No. A B D G Cap Screws / D / / W.... Ref:Bore+D // / / ISO STANDARD METHOD FOR MEASURING KEYSEAT DEPTH D: depth measured at centerling // MM Bore Key way dimensions conform to ISO standard 0 0 0

4 Taper Keyway TAPER BUSHING KEYWAY DIN JIS B UNI GB Bush. No. Bush. Bush. Bush. Bush. Bush. Bore Bore Bore Bore Bore Bore Keyway No. Keyway No. Keyway No. Keyway No. Keyway No. Keyway

5 Taper Keyway TAPER BUSHING KEYWAY USAS B. KEYS AND KEYSEATS Bush. No Bush. Bush. Bush. Bush. Bush. Bore Bore Bore Bore Bore Bore Keyway No. Keyway No. Keyway No. Keyway No. Keyway No. / / / / / / / / / / / / / / / / / / / / / 0 / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / 0 / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / 00 / / / / / / / / / / / / / 00 / / / / / / / / / / / / / / / / / / / / 00 / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / 00 / / / / / / / / / / / / / / / / / Keyway / / / / / / / / / / / / / Shallow keyway

6 Taper Keyway TAPER BUSHING KEYWAY B.S.:Part: KEYS AND KEYSEATS Bush. No Keyway Bush. Keyway Bush. Keyway Bush. Keyway Bush. Keyway Bush. Keyway Bore Bore Bore Bore Bore Bore WIDTH DEPTH No. WIDTH DEPTH No. WIDTH DEPTH No. WIDTH DEPTH No. WIDTH DEPTH No. WIDTH DEPTH / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / 00 / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /.0 0. / / / / / / / / / / / / / / / / / / / /.0 0. / / Dimensions in INCHES. Shallow keyway

7 Taper s TAPER BUSHINGS DIMENSIONS (Con t.) 00 thru 000 Sizes FOR BUSHING REMOVAL F HE HEAD CAP SCREWS FOR BUSHING INSATALLATION 000 FOR BUSHING REMOVAL F TAPER INCLUDED ANGLE 00 HE HEAD CAP SCREWS FOR BUSHING INSTALLATION 0000 Dimensions for 00 thru 000 TAPER s Socket Head Bush.No A B D E L M Cap Screws 00 / / / / / / 0 / / / / / 00 / / / / / / / Dimensions for TAER Metric.Inches Bore Bush.No.. Inches bore metric bore Min. Max. Min. Max For complete instructions refer to instruction sheet packed with each bushing Broe and keyway dimensions conform to ISO standard recommend ation R. for "free" fit.

8 Taper Bore Weld on hubs Taper Bore K & W / WA Weld on hubs TAPER TYPE K WELD ON HUBS HUB NO. BUSH NO. BORE A B D E G J L M N WT K K0 K K0 K K0 K0 K0 K0 K00 K / / / 0 / / / / / / / / / / / / / / / / / / / / / / 0 / / / / / / / / / / / TAPER TYPE W WA WELD ON HUBS HUB NO. BUSH NO. BORE A B C D E F G H J K L M WT W W W WA WA WA0 WA WA0 WA0 WA0 WA0 WA / / / / / 0 / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / 0/ / / / / / / /

9 Taper Bore Weld on hubs TAPER TYPE F WELD ON HUBS HUB NO. BUSH NO. MA.BORE A A W t HUB NO. BUSH NO. MA.BORE O.D. O.D. W t FP FA FB FC FD FE F0 00 / / / / / / FP FA FB FC FD FE / / / / / / TAPER TYPE S WELD ON HUBS HUB NO. BUSH NO. MA.BORE A B C D G J W T S S S0 S0 S S S0 S S00 S0 S / / / / / / / / / / / / / / / / / / / / / /

10 Taper Bore Weld on hubs TAPER BORE W & WH Weldon hubs W WELD ON HUBS Hub Ref. Bush no. A B C D E F W W W0 W W0 W W0 W WH WELD ON HUBS Hub Ref. Bush no. A B C D E F WH WH WH0 WH WH0 WH WH0 WH WH

11 Taper Bore Adapters TAPER BORE ADAPTERS TAPER TYPE F WELD ON HUBS D Adapter Bush E A B C No. No. Class 0 Class 0 Steel Keyseat Gray lron Gray lron Wt B B B B 00B B 00B B / / / / / / / / / / / / / / / / 0 / / 0 / / / / / / / / / / / /

12 Taper Bore Bolt on hubs Taper Bore Bolt on hubs Bolt on Hubs are statically or dynamically balanced. specification Bush No. main dimension A B C hp D E F G H screw hole nxj SM00 SM00 SM000 SM00 SM0 SM SM0 SM0 SM0* SM SM * Can only be installed from one side

13 Split Taper s S.S.IN "R" BUSHING. NONE IN "P","B"&"Q"BUSHINGS G & H BUSHING "P","B","Q"& "R" BUSHING "U" BUSHING SPLIT THRU FLANGE "S" BUSHING SOLID FLANGE "S" & "U" BUSHING "W" AND "Y" BUSHING TYPE Part No.. Specifications Dimensions Cap Screws D Type L U T Large Small H V W Y R S Bore Range No.. Size End End Av. Wt. Lbs. G H P P P B Q Q Q R R S S U0 U0 U U W W Y0* / / / / 0 / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / 0 0 / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / x x / x x x x / / / / / x / x / x / x / x / x x x / x / x / x / x x x

14 Split Taper s S.S.IN "R" BUSHING.NONE IN"P","B"&"Q" BUSHINGS G & H BUSHING "P","B","Q"& "R" BUSHING "U" AND "U" SPLIT THRU FLANGE "UO"(TYPE ONLY) SOLID FLANGE "S" AND "S" SOLID FLANGE "S" & "U" BUSHING "W" AND "Y" BUSHING TYPE Part No.. Specifications Dimensions Cap Screws D Type L U T Large Small H V W Y R S Bore Range No.. Size End End Av. Wt. Lbs. G H P P P B Q Q Q R R S S U0 U0 U U W W Y0* / / / / / / / / / / / 0/ / / /" / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / 0 0 / " / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / " " / / / / / / / / / / / / / / / / / / 0 " x x / x x x x x x x x / x / / x / x x / x / x / x / / x / x x

15 Steel Hubs For Split Taper s STEEL HUBS FOR SPLIT TAPER BUSHINGS STEEL HUBS FOR SPLIT TAPER BUSHINGS Part No.. For Dimensions Tapped Holes Wt O.D. A B C K V W a d No.. Size Lbs. HG HH HCH HP HCP HP HB HB HQ HCQ HQ HR HR HS HS HU0 HU HU Hw G H H P P P B B Q Q Q R R S S U0 U U W / / / / / / / / / / / / / / / / / / / / / / / / / / / / 0 / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / 0 / 0 / 0 / / / / / / / / / / / / /

16 QD ssteel SFSTL ESTL FSTL JSTL MSTL NSTL Screws Requied A B D E F G L Cap Bolt Circle Minimum Standard Keyway Average Weight (Approx.) Dimensions(lnches) Stock Bore Range Shallow Keyway Bores Keyway SFSTL ESTL FSTL JSTL MSTL NSTL.. NONE... Plain Bores Not Split SHSTL DSSTL SKSTL SFSTL ESTL FSTL JSTL MSTL NSTL Shallow Key DimensionStandard Key Seat. Key Keyway Key Shallow Key DimensionSteel Key Seat. Key Keyway Key Standard Keyway and Key Dimension Bores Keyway Key QD bushings made of stainless steel are available as made to order. F=leangth of Mating Bore G=Gap Between QD ± and Mating Hub Standard QD s

17 H JA SH SDS SD SK SF E F J M N P W S A B D E F G L Dimensions(Inches) Bolt Circle Cap Screws Required Minmum Standard Keyway Shallow Keyway Maximum Stock Bore Range Set Scew Size AVERAGE Weight (Approx) Inch Bore Bores Keyway JA SH SDS SD SK SF E F J M N P W Millimeter Bore SH SDS SD SK SF E F J Bore MM Key WT NO K.W. NO K.W. NO K.W. NO K.W. NO K.W. NO K.W. NO K.W. Keystock provided for nonstandard keyways Important The metric system does not refer to keyseat or keyway dimensions as does the English system;instead dimensions are given for the key itself which is rectangular in shape,not square as in the English system. NOTE: TO ORDER:.0 =mm SH mm Exmm=0. Standard QD s

18 QD WeldOn Hubs QD weldon hubs are suitable for use in many applications,such as welding to plate steel sprockets Weldon hubs are made of steel,drill tapped and taper bored for QD bushings QD Type and Type WeldOn Hubs Catalog Number JAA SHA SDSA SKA SFA EA FA JA MA NA PA WA SA DimensionsInches D L B P L BC Type Drilling Weight Pounds Mounting or Reverse Mount Mount Only Tolerance of D Dimension. JAA Thru JA=( ) MA Thru SA=(= )

ROTARY MOTION CONTROL

ROTARY MOTION CONTROL ROTARY MOTION CONTROL Technical Data Sheet Nexen Mechanical Torque Limiter Family PMT / PMK / PMC 2TC 2CC ECC PCC Mechanical Torque Limiter The trend in industry is to design and incorporate more automation

More information

DIMENSIONS AC METRIC (IEC) MOTORS

DIMENSIONS AC METRIC (IEC) MOTORS A METRI (IE) MOTORS B FOOT-MOUNTED METRI (IE) FRAME DIMENSIONS (Millimeters) Mounting Shaft General B Flange B4 Face A B H AB K D E F G ED DH A AD HD M N P S T LA M N P S T LA D 90 0 9 0. 8 M x 8 00 80

More information

Tangential Fans Series TW Impeller diameter 150 mm and 200 mm

Tangential Fans Series TW Impeller diameter 150 mm and 200 mm Tangential Fans Series TW Impeller diameter mm and 0 mm 105 Corporate Drive, Suite E Spartanburg, SC 293 PO Box 2889, Spartanburg, SC 294 USA Tel: 864-599-63 Fax: 864-599-6344 e-mail: info@ltg-inc.net

More information

POLE WHEELS. Where the shaft is very large a cost-effective alternative is to add a pole band (see following section).

POLE WHEELS. Where the shaft is very large a cost-effective alternative is to add a pole band (see following section). A pole wheel on the target shaft is required when using contactless sensors to generate a signal. Often an existing gear wheel can be used but where none is present a special gear, slotted or holed disk

More information

BOLT SIZE Rec.Torque Ft/Lbs. Max Torque Ft/Lbs

BOLT SIZE Rec.Torque Ft/Lbs. Max Torque Ft/Lbs BOLT SIZE Rec.Torque Ft/Lbs Max Torque Ft/Lbs "-0 5 "- "- "- 5 "- "-0 () 7 (9) (5) 5 (0) 9 () 5 () 50 () 70 (95) 00 () 5 (70) 5 (70) 5 () Material Add Suffix to P/N P09 THRU P PIPE CLAMPS FOR RIGID STEEL

More information

Classical Series Timing Belts

Classical Series Timing Belts Classical Series Timing s Classical Series Timing s are manufacture in 5 pitch sizes, X (/5), ( 3 / ), H ( / ), XH ( / ) an XXH ( / 4 ). Stanar stock lengths an withs are shown below, the XH an XXH Series

More information

SNL plummer block housings, 2, 3, 5 and 6 series Other bearing housings Large SNL plummer block housings

SNL plummer block housings, 2, 3, 5 and 6 series Other bearing housings Large SNL plummer block housings Bearing housings SNL plummer block housings, 2, 3, 5 and 6 series... 1033 Other bearing housings... 1058 Large SNL plummer block housings... 1058 SONL plummer block housings... 1059 SDG plummer block housings...

More information

STANDARDISED MOUNTINGS

STANDARDISED MOUNTINGS STANDARDISED MOUNTINGS for series 449 cylinders conforming to ISO 21287 standard Series 434 MOUNTINGS CONFORMING TO ISO 21287 - ISO 15552 - AFNOR NF ISO 15552 - DIN ISO 15552 STANDARDS applications Low

More information

Bettis RGS F-Series. Quarter-Turn Spring-Return (SR) and Double-Acting (DA) Pneumatic Actuators. Product Data Sheet RGS Rev.

Bettis RGS F-Series. Quarter-Turn Spring-Return (SR) and Double-Acting (DA) Pneumatic Actuators. Product Data Sheet RGS Rev. Bettis RGS F-Series Quarter-Turn Spring-Return (SR) and Double-Acting (DA) Pneumatic Actuators Output Torques to 500,000 in-lb (56,492 N m) Ductile Iron or Stainless-Steel Construction Temperatures from

More information

DMHP3(4)L(T)2A00 Series

DMHP3(4)L(T)2A00 Series STANDARDS Valve body: ASME B16.34 Material certification: EN10204-3.1 MTR Quality assurance: ISO 9001:2008 Steel casting: MSS SP-55 Valve marking: MSS SP-25 Valve test: API 598 Direct mount: ISO 5211 End

More information

U.S. Patents 6,290,217 6,244,579

U.S. Patents 6,290,217 6,244,579 CR CR Series Overview U.S. Patents 6,90,7 6,,579 For the best in vibration isolation capabilities, choose Enidine s. Smaller than traditional wire ropes, these unique isolators provide cost-effective,

More information

PN LINE. PN Line. PX Line. PA Line. PU Line PX LINE. PV Line PA LINE & TUBINGS PU LINE PV LINE. Brass Push-in fittings

PN LINE. PN Line. PX Line. PA Line. PU Line PX LINE. PV Line PA LINE & TUBINGS PU LINE PV LINE. Brass Push-in fittings I NDEX PV LINE PX LINE PU LINE PA LINE & TUBINGS PN LINE Brass Push-in fittings Stainless Steel Push-in fittings Brass Standard fittings and Flexible Hoses Couplings and Multiple Connectors Function fittings

More information

/2" Heavy Duty Swing-Out

/2 Heavy Duty Swing-Out Premier Farnell Corporation. 0 All rights reserved. No portion of this can be reproduced without the express written consent of Premier Farnell Corporation. ISO 900 REGISTERED COMPANY We will not be responsible

More information

CONTENTS INDEX P. 2 P. 3-4 PRODUCT FEATURES P. 5-6 PRODUCT STRUCTURE P. 7-8 PRODUCT APPLICATIONS PRODUCT SELECTION P P. 11 MODEL LIST P.

CONTENTS INDEX P. 2 P. 3-4 PRODUCT FEATURES P. 5-6 PRODUCT STRUCTURE P. 7-8 PRODUCT APPLICATIONS PRODUCT SELECTION P P. 11 MODEL LIST P. EMER-FLEX COUPLING CONTENTS INDEX PRODUCT FEATURES PRODUCT STRUCTURE PRODUCT APPLICATIONS PRODUCT SELECTION MODEL LIST NEF-HUB NES Series P. 2 P. 3-4 P. 5-6 P. 7-8 P. 9- P. P. 2 P. 3-4 NEF Series Spacer

More information

Identification Number

Identification Number Identification Number The specification of Micro Linear Way LWL is specified by the identification number, which consists of a model code, a size, a part code, a preload symbol, a classification symbol,

More information

S E G N A L F E IP P

S E G N A L F E IP P 9 8 PIPE FLANGES an excellence in engineering www.jbj.co.uk/ portflanges.html SAE standard, and 6, series flanges for screw or weld connection. Available for straight connection, fixed or swivel elbow

More information

IBV Series C Carbon Steel Inverted Bucket Vertical Steam Trap

IBV Series C Carbon Steel Inverted Bucket Vertical Steam Trap Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

IBV Series Z Alloy Steel Inverted Bucket Vertical Steam Trap

IBV Series Z Alloy Steel Inverted Bucket Vertical Steam Trap Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

Standardized Chemical Pumps. Fields of Application. Designation. Design. Operating Data. Type Series Booklet /7-10 G2 CPK-H

Standardized Chemical Pumps. Fields of Application. Designation. Design. Operating Data. Type Series Booklet /7-10 G2 CPK-H Type Series Booklet.5/7-0 G CPK-H Standardized Chemical Pumps to EN 5/ISO 5/ISO 599, heatable Automation products available: Hya-Drive Hyamaster hyatronic Fields of Application CPK-H pumps are used for

More information

HEAVY DUTY SWING-OUT VALVE

HEAVY DUTY SWING-OUT VALVE ISO 900 REGISTERED COMPANY Akron Brass Company. 20 All rights reserved. No portion of this can be reproduced without the express written consent of Akron Brass Company. We will not be responsible for:

More information

Flow Measurement in Pipes and Ducts COURSE CONTENT

Flow Measurement in Pipes and Ducts COURSE CONTENT Flow Measurement in Pipes and Ducts Dr. Harlan H. Bengtson, P.E. COURSE CONTENT 1. Introduction This course is about measurement of the flow rate of a fluid flowing under pressure in a closed conduit.

More information

Manually Operated Directional Valves DMT- 03 / 06 / 10 DMG-01 / 03 / 04 / 06 / 10 Thread Connection / Sub-plate Mounting.

Manually Operated Directional Valves DMT- 03 / 06 / 10 DMG-01 / 03 / 04 / 06 / 10 Thread Connection / Sub-plate Mounting. Manually Operated Directional s DM- / / DMG- / / / / hread Connection / Mounting Specifications hreaded Connections Numbers DM--C - DM--D - DM--D - DM--B - DM- -C - DM- -D - DM- -D - ( ) (.) (.) (.) (.)

More information

Conversion Kit for: 7620 and 7820 Swing-Out Valves ft-lbs ft-lbs 8835/ ft-lbs

Conversion Kit for: 7620 and 7820 Swing-Out Valves ft-lbs ft-lbs 8835/ ft-lbs ISO 900 REGISTERED COMPANY HEAVY DUTY SWING-OUT VALVE 52 53 23 5 2 2 3 28 39 NOT USED WITH SZ HANDLE 2 NOT USED WITH SZ HANDLE 5 2 3 7 9 9 Premier Farnell Corporation. 20 All rights reserved. No portion

More information

HEAVY DUTY SWING-OUT VALVE

HEAVY DUTY SWING-OUT VALVE ISO 900 REGISTERED COMPANY HEAVY DUTY SWING-OUT VALVE 52 53 23 5 2 2 3 28 39 NOT USED WITH SZ HANDLE 2 NOT USED WITH SZ HANDLE 5 2 3 7 9 9 Premier Farnell Corporation. 20 All rights reserved. No portion

More information

ZF Series Force Transducers

ZF Series Force Transducers Data Sheet Series Force Transducers FEATURES 1 kn to 00 kn High accuracy For tensile or pressure forces Made of stainless steel Enclosure protection IP 67 DESCRIPTION The force transducers of the series

More information

Precision Ball Screw/Spline

Precision Ball Screw/Spline 58-2E Models BNS-A, BNS, NS-A and NS Seal Outer ring Shim plate Seal Spline nut Seal Collar Shim plate Seal End cap Ball Outer ring Ball screw nut Outer ring Ball Retainer Retainer Outer ring Point of

More information

Section 12. EC Cores PHYSICAL DIMENSIONS MAGNETIC DATA

Section 12. EC Cores PHYSICAL DIMENSIONS MAGNETIC DATA Section 12. EC s PHYSICAL DIMENSIONS NUMBER TYPE A B C & F D E S T *-43517-EC *-44119-EC *-45224-EC *-47035-EC (EC35) (EC41) (EC52) (EC70) MAGNETIC DATA in. 1.358 ±.030.681 ±.006.374 ±.012.469.8955 ±.020.108

More information

S E C T I O N 1 2 P R O D U C T S E L E C T I O N G U I D E - H E L I C A L S C R E W P I L E F O U N D A T I O N S

S E C T I O N 1 2 P R O D U C T S E L E C T I O N G U I D E - H E L I C A L S C R E W P I L E F O U N D A T I O N S 1. P R O D U C T S E L E C T I O N G U I D E - H E L I C A L S C R E W P I L E F O U N D A T I O N S Helical foundation pile includes a lead and extension(s). The lead section is made of a central steel

More information

M O D U L E - 3A Model A10V0 Piston Pump Manual A10V0 PUMP. Features

M O D U L E - 3A Model A10V0 Piston Pump Manual A10V0 PUMP. Features T E C H N I C A L I N F O R M A T I O N M A N U A L F O R T H E A 1 0 V 0 V A R I A B L E D I S P L A C E M E N T P U M P S A10V0 PUMP Features High Efficiency through load sensing (= fuel savings) Maximum

More information

Edward C. Robison, PE, SE. 02 January Architectural Metal Works ATTN: Sean Wentworth th ST Emeryville, CA 94608

Edward C. Robison, PE, SE. 02 January Architectural Metal Works ATTN: Sean Wentworth th ST Emeryville, CA 94608 Edward C. Robison, PE, SE ks ATTN: Sean Wentworth 1483 67 th ST Emeryville, CA 94608 02 January 2013 SUBJ: 501 CORTE MADERA AVE, CORTE MADERA, CA 94925 BALCONY GUARD BASE PLATE MOUNTS The guards for the

More information

FLENDER drives Fundamental Principles of Mechanical Engineering

FLENDER drives Fundamental Principles of Mechanical Engineering FLENDER drives Fundamental Principles of Mechanical Engineering Technical Handbook Technical Drawings Standardization 2 Physics 3 Mathematics / Geometry 4 Mechanics / Strength of Materials 5 Hydraulics

More information

Surface-mounting Thermostats ATH Type Series

Surface-mounting Thermostats ATH Type Series Page 1/9 urface-mounting Thermostats ATH eries k enclosure protection IP 54 k tested to IN EN 14597 (replacing IN 3440) Brief description Thermostats control and monitor thermal processes. Instruments

More information

DISC-O-FLEX COUPLING

DISC-O-FLEX COUPLING RATHI TRANSPOWER PVT. LTD. PUNE - INDIA INSTALLATION INSTRUCTIONS DISC-O-FLEX COUPLING R-II-D-01/00-04/08 Page 1 INSTALLATION INSTRUCTIONS (A) BEFORE INSTALLATION 1. R e m o v e t h e c o u p l i n g f

More information

90/10 COPPER NICKEL ALLOY EUCARO 10 OFFSHORE APPLICATIONS

90/10 COPPER NICKEL ALLOY EUCARO 10 OFFSHORE APPLICATIONS 0/ COPPER NICKEL ALLOY EUCARO OFFSHORE APPLICATIONS 2 W O R L D O F COPPER N I CK E L Eucaro TABLE OF CONTENTS Technical Information Page - Pipes Page Inner Flanges Page - Outer Flanges Page Solid Slip-On

More information

C-Lube Linear Way ML Linear Way L ML LWL

C-Lube Linear Way ML Linear Way L ML LWL -Lube Linear ay ML Linear ay L MLLL -Lube Maintenance ree Series -Lube Linear ay ML ML long term maintenance free supported! The aquamarine end plate is the symbol of maintenance free. Identification umber

More information

xce series & xjf EXPLOSIONPROOF ENCLOSURES EXPLOSIONPRROOF ENCLOSURES CERTIFICATIONS STANDARD FEATURES DESIGN OPTIONS MATERIAL ADALET.

xce series & xjf EXPLOSIONPROOF ENCLOSURES EXPLOSIONPRROOF ENCLOSURES CERTIFICATIONS STANDARD FEATURES DESIGN OPTIONS MATERIAL ADALET. EXPLOSIONPROOF XCE: Explosionproof Control Enclosures XCEX: Flameproof Control Enclosures XCEQ: Explosionproof Quad-Lead Control Enclosures XJF: Explosionproof Junction Boxes STANDARD FEATURES standard

More information

Serie B2.1. Flanged ductile iron ball valve. made in. Application fields. Shut-off valves E U R O P E. 18

Serie B2.1. Flanged ductile iron ball valve. made in. Application fields. Shut-off valves E U R O P E. 18 erie B. Flanged ductile iron ball valve BRanDOni made in E U R O P E Application fields WATER CONdITIONING GA EATING INdUTRY FIRE FIGTING www.brandoni.it erie B. eries B. valves are shut-off ball valves

More information

Technical Specifications - RJ Series

Technical Specifications - RJ Series Technical Specifications - Raised Cover configuration - 4 cover screws, lift off cover Construction Pan head screws Cover retention chain Raised Cover Minimizes protruding surfaces Stainless steel beaded

More information

SGF. The metric thread forming connection

SGF. The metric thread forming connection SGF The metric thread forming connection Schriever SGF Our challenge: An economical solution Alication: Direct connections in cylindrical bores and casted bores. Schriever SGF -screws are metric thread-forming,

More information

THREE HOLE SPLICE CLEVIS FOR B52 Standard finishes: ZN, GRN Wt./C 126 Lbs. (57.1 kg)

THREE HOLE SPLICE CLEVIS FOR B52 Standard finishes: ZN, GRN Wt./C 126 Lbs. (57.1 kg) CLEVIS FITTINGS B169 TWO HOLE SPLICE Wt./C 84 Lbs. (38.1 kg) B168 THREE HOLE SPLICE Wt./C 126 Lbs. (57.1 kg) B167 Wt./C 178 Lbs. (80.7 kg) 3 1 /2 (88.9) B170 TWO HOLE SPLICE Wt./C 123 Lbs. (55.8 kg) 5

More information

Mil-Stak PT/2016 PARTS MANUAL

Mil-Stak PT/2016 PARTS MANUAL Mil-Stak PT/0 PARTS MANUAL Mil-Stak Inc. 0 Hwy 0 West Fruitland Idaho Phone 0--0 ext - Main Assemblies ITEM PAGE P00 P00 P0 P0 PT 0 P00 Wheel Assembly Valve Block Frame Assembly PT Stackbed Assembly Receiving

More information

Solenoid valves Type EVR 2 g 40 NC/ NO New EVR 6 with Steel cover design

Solenoid valves Type EVR 2 g 40 NC/ NO New EVR 6 with Steel cover design MAKING MODERN LIVING POSSIBLE Technical brochure Solenoid valves EVR 2 g 40 NC/ NO New with Steel cover design EVR is a direct or servo operated solenoid valve for liquid, suction, and hot gas lines with

More information

Surface-mounting thermostats Series ATH

Surface-mounting thermostats Series ATH JUMO GmbH & Co. KG Delivery address:mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 E-mail: mail@jumo.net Internet: www.jumo.net

More information

50 Hz n= 2900 rpm. Standardised EN 733 centrifugal pumps INSTALLATION AND USE. PERFORMANCE RANGE Flow rate up to 6000 l/min (360 m³/h) Head up to 98 m

50 Hz n= 2900 rpm. Standardised EN 733 centrifugal pumps INSTALLATION AND USE. PERFORMANCE RANGE Flow rate up to 6000 l/min (360 m³/h) Head up to 98 m F Standardised EN 733 centrifugal pumps Hz n= 9 rpm Clean water Industrial use PERFORMNCE RNGE Flow rate up to (3 ) Head up to 9 m PPLICTION LIMITS Manometric suction lift up to 7 m Liquid temperature

More information

C-Lube Linear Way ML ML MLF

C-Lube Linear Way ML ML MLF Maintenance ree & U.S. PTTD C-Lube Linear ay Variation of C-Lube Linear ay Shape Length of slide unit Model code C-Lube Linear ay is a linear motion rolling guide, incorporating the C-Lube as a components

More information

LES. Single-stage end-suction pumps Identification Type key

LES. Single-stage end-suction pumps Identification Type key Contents Singlestage endsuction pumps Identification Type key Product data Introduction Applications Features and benefits Performance range pole pole 6 pole Construction Sectional drawing Construction

More information

CLIPPER SCREEN SIZES - DECEMBER 28, 2005

CLIPPER SCREEN SIZES - DECEMBER 28, 2005 PERFORATED METAL ROUND HOLE FRACTIONS HOLE SIZE HOLE SIZE IN HOLE SIZE TOLERANCE STANDARD OR ( INCH ) IN 64TH THOUSANDS IN MM THOUSAND ADD ON PRICE 1/25 2.56.040 1.01 + 0 -.003 STANDARD 1/24 2.67.041 1.05

More information

Identification The of -Lube Linear Roller Way Super MX is identified by the identification, which consists of model code, size, part code, material symbol preload symbol, classification symbol, interchangeable

More information

Silicon Temperature Sensors KT 100 KT 110 KT 130 KT 210 KT 230. KTY 11-x KTY 13-x KTY 21-x KTY 23-x KTY 19-6 KTY 16-6

Silicon Temperature Sensors KT 100 KT 110 KT 130 KT 210 KT 230. KTY 11-x KTY 13-x KTY 21-x KTY 23-x KTY 19-6 KTY 16-6 Silicon Temperature Sensors KT 100 KT 110 KT 130 KT 210 KT 230 KTY 16-6 KTY 10-x KTY 11-x KTY 13-x KTY 21-x KTY 23-x KTY 19-6 Features Temperature dependent resistor with positive temperature coefficient

More information

Appendix. A 1 Properties of areas.* *Symbols used are: A = area I = moment of inertia S = Section modulus

Appendix. A 1 Properties of areas.* *Symbols used are: A = area I = moment of inertia S = Section modulus Appendix A 1 Properties of areas.* *Symbols used are: A = area I = moment of inertia S = Section modulus r = radius of gyration = I/A J = polar moment of inertia Z p = polar section modulus Circle R D

More information

CF (Conflat Flange) Fittings - Adapters. (505)

CF (Conflat Flange) Fittings - Adapters.  (505) F (onflat ) 1 Fittings - dapters www.idealvac.com (505)72-0037 1 Vacuum Fittings - dapters - olt Kits F - onflat F onflat flanges (F) are used for ultra- Vin elasmer gaskets can be used over and over but

More information

CV3000 Series. Characterized Insert Control Valves

CV3000 Series. Characterized Insert Control Valves CV3000 Series Characterized Insert Control Valves The CV3000 Series is a v-type control valve for precise control allowing high pressure drop capability with straight-through flow and bubble-tight shut

More information

Configurations & Parts Identification

Configurations & Parts Identification Suspension Series Configurations & Parts Identification Advancing the Practical Application of Suspension Technology Springfield, MO n (800) 654-8824 n (417) 862-5012 Fax (417) 862-2317 n www.hutchensindustries.com

More information

Thermal-Magnetic Circuit Breaker 2210-S2...

Thermal-Magnetic Circuit Breaker 2210-S2... Description One, two and three pole thermal-magnetic circuit breakers with trip free mechanism and toggle actuation (S-type TM CBE to EN 6094/IEC 94). Designed for panel or plug-in mounting. Available

More information

Thermal-Magnetic Circuit Breaker 2210-S2...

Thermal-Magnetic Circuit Breaker 2210-S2... Thermal-Magnetic Circuit Breaker 0-S... Description One, two and three pole thermal-magnetic circuit breakers with trip free mechanism and toggle actuation (S-type TM CBE to EN 60934/IEC 934). Designed

More information

xanik API 6D Trunnion Ball Valves

xanik API 6D Trunnion Ball Valves API 6D Trunnion Ball Valves BV - XANIK SIDE ENTRY TRUNNION BALL VALVES table of contents BALL VALVES INDEX BV - XANIK SIDE ENTRY TRUNION BALL VALVES BV - 3 XANIK BALL VALVE DESIGN FEATURES BV - 4 thru

More information

DRAWING ISO 200 REV. "R" TYP TYP SLOT OPTIONAL .130 TYP KNURL STYLE - MFG. OPTION

DRAWING ISO 200 REV. R TYP TYP SLOT OPTIONAL .130 TYP KNURL STYLE - MFG. OPTION .500 SHELL I.D. 0.39.135 F T TOP ENTRY H J K SLOT OPTIONAL E END ENTRY G.062.062 0.49 P.130 KNURL STYLE - MFG. OPTION R S M DIMENSIONS PART # P N CABLE ENTRY ISO - 100 0.36 0.37 02 THRU 33 ISO - 200 0.57

More information

T20WN. Data Sheet. Torque transducers. Special features. Installation example with bellows couplings. B en

T20WN. Data Sheet. Torque transducers. Special features. Installation example with bellows couplings. B en T20WN Torque transducers Data Sheet Special features - Nominal (rated) torques 0.1 N m, 0.2 N m, 0. N m, 1 N m, 2 N m, N m, 10 N m, 20 N m, 0 N m, 100 N m, 200 N m - Accuracy class: 0.2 - Contactless transmission

More information

Shaft Locking Devices

Shaft Locking Devices External Shaft ocking evice Available sizes: Page # S 900 Self-centering Exceptional concentricity Suitable for hollow shafts Axial hub position fixe uring clamping etric 14mm to 240mm arger sizes on request

More information

Gearhead variations M = Motor attachment gearhead S = Separate version. Reduced specification available on request. Gearhead variations.

Gearhead variations M = Motor attachment gearhead S = Separate version. Reduced specification available on request. Gearhead variations. Order information TP + 004 TP + 4000 SP + 060 SP + 240 Type code S = Standard A = Optimized mass moment of inertia b) E = Version in ATEX b) F = Food-grade lubrication b) G = Grease b) L = Low friction

More information

LOW PROFILE TRANSFERS

LOW PROFILE TRANSFERS LOW PROFILE TRANSFERS PARTS CATALOG 1 INDUSTRIAL DRIVE PO BOX 0 SWIFT CURRENT, SASKATCHEWAN, CANADA SH 0L0 PHONE:.66. (NORTH AMERICA) FAX: 06.. WEBSITE: HTTP://WWW.BATCOMFG.COM EMAIL: SALES@BATCO-REM.COM

More information

Cam Roller Guides. The Drive and Control Company. Service Automation. Electric Drives and Controls. Linear Motion and Assembly Technologies

Cam Roller Guides. The Drive and Control Company. Service Automation. Electric Drives and Controls. Linear Motion and Assembly Technologies Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Cam Roller Guides The Drive and Control Company Linear Motion

More information

Selection table for guided systems (crank driven)

Selection table for guided systems (crank driven) Selection table for guided systems (crank driven) One mass shaker brute-force system One mass shaker natural frequency system Two mass shaker fast-runner system with reaction force-compensation Single

More information

CHAPTER 8 SCREWS, FASTENERS, NONPERMANENT JOINTS

CHAPTER 8 SCREWS, FASTENERS, NONPERMANENT JOINTS CHAPTER 8 SCREWS, FASTENERS, NONPERMANENT JOINTS This chapter deals with the design and analysis of nonpermanent fasteners such as bolts, power screws, cap screws, setscrews, eys and pins. 8- Standards

More information

Tisa Enterprises. The Clamping Professionals

Tisa Enterprises. The Clamping Professionals Flat Strap Clamp Material: Medium carbon steel, Hardened and Tempered : T1-FSC IS: - 4 D x L A B K S T1-FSC- x 0. T1-FSC- x 0. T1-FSC- x 0. T1-FSC-1 x 1 0. T1-FSC-1 x 1 M 1.00 T1-FSC-1 x 0 M 1. T1-FSC-0

More information

Series MHY2/MHW Angular Gripper. Cam actuation style is now standardized! MHZ2 MHZJ2 MHQ MHL2 MHR MHK MHS MHC2 MHT2 MHY2 MHW2 MRHQ 2.

Series MHY2/MHW Angular Gripper. Cam actuation style is now standardized! MHZ2 MHZJ2 MHQ MHL2 MHR MHK MHS MHC2 MHT2 MHY2 MHW2 MRHQ 2. 18 Angular Gripper Cam Style Rack & Pinion Style Series / Cam actuation style is now standardized! 2.8-1 18 Angular Gripper 18 Angular Gripper Series / Cam Style Rack & Pinion Style Series / Series MHY/Cam

More information

MADILL MBT GRAPPLE RETURN TO INDEX

MADILL MBT GRAPPLE RETURN TO INDEX MADILL MBT GRAPPLE RETURN TO INDEX MBT CONTROL VALVE Additional Parts Breakdown for: - Outrigger Sections - Rotate Section - End Plate E 00- page Valve section Basic element without additional functions

More information

5. What is the moment of inertia about the x - x axis of the rectangular beam shown?

5. What is the moment of inertia about the x - x axis of the rectangular beam shown? 1 of 5 Continuing Education Course #274 What Every Engineer Should Know About Structures Part D - Bending Strength Of Materials NOTE: The following question was revised on 15 August 2018 1. The moment

More information

G-FIRE FLANGE ADAPTERS

G-FIRE FLANGE ADAPTERS G-FIRE FLANGE ADAPTERS 21 G-FIRE FLANGE ADAPTERS Pictorial Table of Contents MATERIAL SPECIFICATIONS Issue 03, 04, 07 Cert No. 570, 669, 673 For detailed Listing and Approval information see pages 101-10

More information

# LOBE (TX) GO PRODUCTION GAGES TMF/TXq-804

# LOBE (TX) GO PRODUCTION GAGES TMF/TXq-804 # LOBE (TX) PENETRATION GAGES TMF/TXq9 INTERNAL RECESS S STANDARD REFERENCES TMF/TXq9 5 7 9 5 5 7 5 5 55 7 9 5 7 9 5 5 7 5 5 55 7 9 When Ordering Specify: Inch or Metric Dial Indicators SPCCompatible With

More information

Backlash-free Torque Limiting Clutches

Backlash-free Torque Limiting Clutches ES -Compact Backlash-free Torque Limiting Clutches www..de Instant separation on overload Permanent backlash-free torque transmission Readable torque adjustment Synchronous, ratchetting and overload designs

More information

Ball screw. Linear. Coupling cover. 1Positioning table of a structure with enhanced sealing property. 3 High corrosion resistance

Ball screw. Linear. Coupling cover. 1Positioning table of a structure with enhanced sealing property. 3 High corrosion resistance Cleanroom Precision Positioning Table TC Ball screw TC EB Slide table inear Way Side cover Stainless sheet Motor bracket inear Coupling cover Pipe threads for suction connector Points ight weight, low

More information

Thermal-Magnetic Circuit Breaker 2210-S2..

Thermal-Magnetic Circuit Breaker 2210-S2.. Thermal-Magnetic Circuit Breaker -S.. Description One, two and three pole thermal-magnetic circuit breakers with trip-free mechanism and toggle actuation (S-type TM CBE to EN 60934/IEC 934). Designed for

More information

THE LOSMANDY G-11 MOUNT

THE LOSMANDY G-11 MOUNT Checking the parts THE LOSMANDY G-11 MOUNT Depending on which accessories you ordered, your G-11 mount was shipped in four or more boxes. The contents of each box are as follows: Equatorial Mount Adjustable

More information

Thermal-Magnetic Circuit Breaker 2210-S2..

Thermal-Magnetic Circuit Breaker 2210-S2.. Thermal-Magnetic Circuit Breaker -S.. Description One, two and three pole thermal-magnetic circuit breakers with trip free mechanism and toggle actuation (S-type TM CBE to EN 6094/IEC 94). Designed for

More information

Centrifugal Fans double inlet with direct drive backwardcurved true airfoil blades. Issue 1.4 September 2013

Centrifugal Fans double inlet with direct drive backwardcurved true airfoil blades. Issue 1.4 September 2013 Centrifugal Fans double inlet with direct drive backwardcurved true airfoil blades Issue 1.4 September 013 1 The overall picture will decide Complete systems by Nicotra ebhardt Depending on the model of

More information

MECHANICAL DATA. EXTENSION AA FRAME Hp 2E 2E 2F 2F H K BA S R ES N-W U D.E. O.D.E.

MECHANICAL DATA. EXTENSION AA FRAME Hp 2E 2E 2F 2F H K BA S R ES N-W U D.E. O.D.E. jet pump motors nema 56 odp single phase KEYWAY SHAFT A B L 1 D O P XO EXTENSION AA FRAME Hp 2E 2E 2F 2F H K BA S R ES N-W U D.E. O.D.E. W56 E56 1/4 10.748 10.236 6.299 1/3 6.378 5.669 1.516 1/2 11.142

More information

DRUM MOTOR DM 0080 DRUM MOTOR DM Technical data. Design variants and accessories

DRUM MOTOR DM 0080 DRUM MOTOR DM Technical data. Design variants and accessories Practice-iented, scalable and thought out in detail: The new drum mot makes it easy to ild a completely indidual convey system and is dimensioned f the higher requirements f permissible belt tension from

More information

Check-Q-meter. Table of contents. Features. Functions. RE 27551/ /10 Replaces: Type FD

Check-Q-meter. Table of contents. Features. Functions. RE 27551/ /10 Replaces: Type FD Check-Q-meter RE /0.0 /0 Replaces: 09.9 Type FD Nominal size... Series ax. Operating pressure 0 bar ax. Flow 0 l/min K9/ Table of contents Contents Page Features Functions Ordering details Symbols Functional

More information

PRODUCT CATALOG

PRODUCT CATALOG www.engman-taylor.com 0 PRODUCT CATALOG OUR COMMITMENT TO YOU... 00% MADE PREMIUM INDUSTRIAL QUALITY PRODUCTS % ORDER FULFILLMENT SAME DAY SHIPPING NO MINIMUM ORDER REQUIREMENTS EXCEPTIONAL QUALITY CONTROL

More information

Available PartNum Description 1.00 BSS BUNA-N PKG. 4" 1000wp SPLIT+SLEEVE dr PSI

Available PartNum Description 1.00 BSS BUNA-N PKG. 4 1000wp SPLIT+SLEEVE dr PSI PLIDCO - Finished Goods in MAIN Warehouse Printed: 08/16/13 07:36 Available PartNum Description 1.00 BSS0-0400 BUNA-N PKG. 4" 1000wp SPLIT+SLEEVE dr6948 1000 PSI 2.00 CC02-7004S CROSS 2X2X2X2 1000 PSI

More information

These two values are determined by the application (see calculation example on pages 52-53).

These two values are determined by the application (see calculation example on pages 52-53). Tension brake sizing Two important parameters are used in brake selecting: Max. torque requirement Max. thermal power to be dissipated These two values are determined by the application (see calculation

More information

Thermal-Magnetic Circuit Breaker 2210-S2..

Thermal-Magnetic Circuit Breaker 2210-S2.. Thermal-Magnetic Circuit Breaker -S.. Description One, two and three pole thermal-magnetic circuit breakers with trip free mechanism and toggle actuation (S-type TM CBE to EN 60934/IEC 934). Designed for

More information

Features and Benefits

Features and Benefits ...................................................................................- Features and Benefits.............................................................................. How to Order....................................................................................

More information

PLOW MOUNT KIT FOR POLARIS RANGER P/N ASSEMBLY / OWNERS MANUAL

PLOW MOUNT KIT FOR POLARIS RANGER P/N ASSEMBLY / OWNERS MANUAL PLOW MOUNT KIT FOR POLARIS RANGER P/N 34-3010 ASSEMBLY / OWNERS MANUAL Application PLOW PUSH FRAME NO. 34-0000 or 34-0070 Before you begin, please read these instructions and check to be sure all parts

More information

Flow rates to 750 l/min

Flow rates to 750 l/min FP Maximum pressure 0 bar Flow rates to 70 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: AISI L (FP 0-0)

More information

SECTION L. Isobars. Thermal Solutions Worldwide. Introduction to Isobar Heat Pipes and How They Work L-2. Common Isobar Types L-3

SECTION L. Isobars. Thermal Solutions Worldwide. Introduction to Isobar Heat Pipes and How They Work L-2. Common Isobar Types L-3 Thermal Solutions Worldwide SECTION L Isobars Introduction to Isobar Heat Pipes and How They Work L-2 Common Isobar Types L-3 Sizes and Ordering L-4 Introduction to Isobar Heat Pipes and How They Work

More information

ø6, ø10, ø15, ø20, ø25, ø32, ø40, ø50, ø63 How to Order Switch rail Nil Standard stroke Refer to page 12 for standard stroke.

ø6, ø10, ø15, ø20, ø25, ø32, ø40, ø50, ø63 How to Order Switch rail Nil Standard stroke Refer to page 12 for standard stroke. Magnetically Coupled Rodless Cylinder: Direct Mount ype Series ø, ø, ø, ø, ø, ø, ø, ø0, ø Direct mount type mm mm mm mm mm mm mm 0 0 mm mm 00 MB Piping type Both sides piping type Centralized piping type

More information

Technical Information for Side Milling Cutter

Technical Information for Side Milling Cutter Technical Information for Side illing Cutter Adjusting side cutter Tangential Type (High rigidity) Operating manual CNHQ Side illing Cutter for Cast iron Thread illing Cutters for Aluminum Cutters for

More information

Hone Heads. HB Type ø mm ( )

Hone Heads. HB Type ø mm ( ) Hone Heads HB Type ø 76 1 375 mm (2.99 54.13 ) HB Tooling ø 76-205 mm (2.99 8.07 inch) Be diameter HONE HEADS f stock removal rate in soft steel up to 750 cm 3 /h (45.78 inch 3 /h) Machine coupling Shaft

More information

BEARINGS Pillow Blocks

BEARINGS Pillow Blocks The bearing size is usually selected according to the required bearing life and reliability under a specified type of load charged on the bearing. The load applied to the bearing operating under a static

More information

SmartLine Radar Level Meter RM70

SmartLine Radar Level Meter RM70 Page 1 of 5 SmartLine Radar Level Meter Model Selection Guide Reliable measurement in difficult process conditions +/- 3 mm / +/-0.12" standard accuracy Operates up to a flange temperature of 200 0 C /

More information

APPENDIX 2 RULES FOR BOLTED FLANGE CONNECTIONS WITH RING TYPE GASKETS

APPENDIX 2 RULES FOR BOLTED FLANGE CONNECTIONS WITH RING TYPE GASKETS APPEDIX RULES FOR BOLTED FLAGE COECTIOS WITH RIG TYPE GASKETS -1 SCOPE GEERAL (a) The rules in Appendix apply specifically to the design of bolted flange connections with gaskets that are entirely within

More information

American Revolution Deluxe Full Cutoff LED Series ARDCL

American Revolution Deluxe Full Cutoff LED Series ARDCL P R O D U C T O V E R V I E W SERIES ARDCL Applications: Streetscapes Walkways Pathways Parks Features: Colonial LED lantern, replaces HID models up to 150W HPS for street and area lighting applications

More information

Instruction Manual. Kite-22 Camera Crane Starter Package (KITE-22-STARTER) Exclusive of Weights

Instruction Manual. Kite-22 Camera Crane Starter Package (KITE-22-STARTER) Exclusive of Weights Instruction Manual Kite-22 Camera Crane Starter Package (KITE-22-STARTER) Exclusive of Weights All rights reserved No part of this document may be reproduced, stored in a retrieval system, or transmitted

More information

D M4500 Series 3-Piece Ball Valve

D M4500 Series 3-Piece Ball Valve M0 Series iece all Valve TURS & NITS * or food and general chemical service application * Comes standard in stainless steel and carbon steel * Investment cast body and end caps * Self adjusting stem packing

More information

The perfect Torque Limiting Clutch for

The perfect Torque Limiting Clutch for The perfect Torque Limiting Clutch for Machine Tools Packaging Machinery Printing and Paper Machinery Automated Systems Power Transmission compact, backlash-free torque limiting clutch Immediate disengagement

More information

Installation, Maintenance and Operating Instructions

Installation, Maintenance and Operating Instructions Trunnion-Design Ball Valves 12 20 (DN 300 500) Series 7150 12 (DN 300) Series 730S 12 20 (DN 300 500) Series 7300 14 24 (DN 350 600) Series 9150 14 24 (DN 350 600) Series 9300 Installation, Maintenance

More information

Flow rates to 750 l/min

Flow rates to 750 l/min FP Maximum pressure 0 bar Flow rates to 70 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: AISI L (FP 00-0)

More information

1.2 Z 014-A LUG TYPE BUTTERFLY VALVE Z 014-A TECHNICAL DATA:

1.2 Z 014-A LUG TYPE BUTTERFLY VALVE Z 014-A TECHNICAL DATA: TECNICA DATA: ug type butterfly valve with threaded holes. This type enables the one-sided lugging of pipes. Nominal diameter: Face-to-face: EN Series (DIN T ) ISO Series API 0 Table BS Series NF E -0.

More information