Fast Recovery Diodes (Stud Version) 200 A

Transcription

1 Fast Recovery Diodes (Stud Version) DO-9 (DO-05AB) PRMARY CHARACTERSTCS F(AV) Package DO-9 (DO-05AB) Circuit configuration Single FEATURES High power fast recovery diode series.0 μs to.0 μs recovery time High voltage ratings up to 0 V High current capability Optimized turn-on and turn-off characteristics Low forward recovery Fast and soft reverse recovery Compression bonded encapsulation Stud version EDEC DO-9 (DO-05AB) Maximum junction temperature 5 C Designed and qualified for industrial level Material categorization: for definitions of compliance please see /doc?999 TYPCAL APPLCATONS Snubber diode for GTO High voltage freewheeling diode Fast recovery rectifier applications MAOR RATNGS AND CHARACTERSTCS PARAMETER TEST CONDTONS VALUES UNTS F(AV) T C 85 C F(RMS) 3 Hz 9 A FSM Hz 530 Hz 5 t ka s Hz V RRM Range 00 to 0 V Range.0 to.0 μs t rr T 5 C T -0 to +5 ELECTRCAL SPECFCATONS VOLTAGE RATNGS TYPE NUMBER VS-SD03N/R..S0 VS-SD03N/R..S5 VS-SD03N/R..S0 VOLTAGE CODE V RRM, MAXMUM REPETTVE PEAK AND OFF-STATE VOLTAGE V V RSM, MAXMUM NON-REPETTVE PEAK VOLTAGE V RRM MAXMUM T = 5 C ma 35 Revision: -an-8 Document Number: 93 ARE SUBECT TO SPECFC DSCLAMERS, SET FORTH AT /doc?

2 FORWARD CONDUCTON PARAMETER SYMBOL TEST CONDTONS VALUES UNTS Maximum average forward current at case temperature F(AV) conduction, half sine wave 85 C Maximum RMS current F(RMS) DC at 76 C case temperature 3 t = 0 ms No voltage 9 Maximum peak, one-cycle t = 8.3 ms reapplied 530 A non-repetitive forward current FSM t = 0 ms % V RRM 00 t = 8.3 ms reapplied Sinusoidal half wave, 00 t = 0 ms No voltage initial T = T maximum 5 Maximum t for fusing t t = 8.3 ms reapplied t = 0 ms % V RRM 88 ka s t = 8.3 ms reapplied 8 Maximum t for fusing t t = 0. to 0 ms, no voltage reapplied ka s (6.7 % x x Low level value of threshold voltage V F(AV) < < x F(AV) ), F(TO).00 T = T maximum V High level value of threshold voltage V F(TO) ( > x F(AV) ), T = T maximum.7 (6.7 % x x Low level value of forward slope resistance r F(AV) < < x F(AV) ), f.0 T = T maximum mw High level value of forward slope resistance r f ( > x F(AV) ), T = T maximum 6 Maximum forward voltage drop V pk = 68 A, T = 5 C, t p = 00 μs square pulse.65 V RECOVERY CHARACTERSTCS MAXMUM VALUE AT T = 5 C TEST CONDTONS TYPCAL VALUES AT T = 5 C CODE t rr at 5 % RRM (μs) pk SQUARE PULSE (A) d/dt (A/μs) V r (V) t rr at 5 % RRM (μs) Q rr (μc) S S rr (A) dir dt t rr Q rr t S RM(REC) THERMAL AND MECHANCAL SPECFCATONS PARAMETER SYMBOL TEST CONDTONS VALUES UNTS Maximum operating temperature range T -0 to 5 Maximum storage temperature range T Stg -0 to C Maximum thermal resistance, junction to case R thc DC operation 0.5 Maximum thermal resistance, case to heatsink R thcs Mounting surface, smooth, flat and greased 0.08 K/W Mounting torque ± 0 % Not-lubricated threads 3 Lubricated threads.5 Nm Approximate weight g Case style See dimensions (link at the end of datasheet) DO-9 (DO-05AB) Revision: -an-8 Document Number: 93 ARE SUBECT TO SPECFC DSCLAMERS, SET FORTH AT /doc?

3 R thc CONDUCTON CONDUCTON ANGLE SNUSODAL CONDUCTON RECTANGULAR CONDUCTON TEST CONDTONS UNTS T = T maximum Note The table above shows the increment of thermal resistance R thc when devices operate at different conduction angles than DC K/W Maximum Allowable Case Temperature ( C) R (DC) = 0.5 K/W thc Conduction Angle Average Forward Current (A) Maximum Average Forward Power Loss (W) RMS Limit Conduction Angle T = 5 C Average Forward Current (A) Fig. - Current Ratings Characteristics Fig. 3 - Forward Power Loss Characteristics Maximum Allowable Case Temperature ( C) R (DC) = 0.5 K/W thc Conduction Period 30 DC Average Forward Current (A) Maximum Average Forward Power Loss (W) 5 0 DC RMS Limit Conduction Period T = 5 C Average Forward Current (A) Fig. - Current Ratings Characteristics Fig. - Forward Power Loss Characteristics Revision: -an-8 3 Document Number: 93 ARE SUBECT TO SPECFC DSCLAMERS, SET FORTH AT /doc?

4 Peak Half Sine Wave Forward Current (A) At Any Rated Load Condition And With Rated V RRM Applied Following Surge. nitial T = 5 Hz Hz 0.0 s 0 0 Number Of Equal Amplitude Half Cycle Current Pulses (N) Fig. 5 - Maximum Non-Repetitive Surge Current nstantaneous Forward Current (A) T = 5 C T = 5 C nstantaneous Forward Voltage (V) Fig. 7 - Forward Voltage Drop Characteristics Peak Half Sine Wave Forward Current (A) Maximum Non Repetitive Surge Current Versus Pulse Train Duration. nitial T = 5 C No Voltage Reapplied Rated V Reapplied RRM Pulse Train Duration (s) Fig. 6 - Maximum Non-Repetitive Surge Current Transient Thermal mpedance Z thc (K/W) Steady State Value: R thc = 0.5 K/W (DC Operation) Square Wave Pulse Duration (s) Fig. 8 - Thermal mpedance Z thc Characteristic V FP T = 5 C Forward Recovery (V) 0 0 T = 5 C SD03N/R..S0 Series Rate Off Fall Of Forward Current di/dt (A/μs) Fig. 9 - Typical Forward Recovery Characteristics Revision: -an-8 Document Number: 93 ARE SUBECT TO SPECFC DSCLAMERS, SET FORTH AT /doc?

5 Maximum Reverse Recovery Time - t rr (μs) SD03N/R..S0 Series T = 5 C, V R = 30 V = 7 A Fig. 0 - Recovery Time Characteristics Maximum Reverse Recovery Time - t rr (μs) SD03N/R..S5 Series T = 5 C, V R = 30 V = 7 A Fig. 3 - Recovery Time Characteristics Maximum Reverse Recovery Charge - Q rr (μc) = 7 A SD03N/R..S0 Series T = 5 C, V R = 30 V Maximum Reverse Recovery Charge - Q rr (μc) = 7 A 0 SD03N/R..S5 Series T = 5 C, V R = 30 V Fig. - Recovery Charge Characteristics Fig. - Recovery Charge Characteristics Maximum Reverse Recovery Current - rr (A) 0 30 = 7 A SD03N/R..S0 Series T = 5 C, V R = 30 V Maximum Reverse Recovery Current - rr (A) = 7 A 0 30 SD03N/R..S5 Series 0 T = 5 C, V R = 30 V Fig. - Recovery Current Characteristics Fig. 5 - Recovery Current Characteristics Revision: -an-8 5 Document Number: 93 ARE SUBECT TO SPECFC DSCLAMERS, SET FORTH AT /doc?

6 Maximum Reverse Recovery Time - trr (μs) SD03N/R..S0 Series T = 5 C, V R = 30 V = 7 A Maximum Reverse Recovery Charge - Q rr (μc) = 7 A SD03N/R..S0 Series T = 5 C, V R = 30 V Fig. 6 - Recovery Time Characteristics Fig. 7 - Recovery Charge Characteristics Maximum Reverse Recovery Current - rr (A) 0 30 = 7 A SD03N/R..S0 Series T = 5 C, V R = 30 V Fig. 8 - Recovery Current Characteristics Peak Forward Current (A) E E3 E SD03N/R..S0 Series Sinusoidal Pulse T = 5 C, V RRM = V dv/dt = 0 V/μs E E E E3 E 0 joules per pulse 0 Fig. 9 - Maximum Total Energy Loss Per Pulse Characteristics t p E E E3 E 0 SD03N/R..S0 Series Trapezoidal Pulse T = 5 C, V RRM = V dv/dt = 0 V/μs, di/dt = A/μs 0 joules per pulse Revision: -an-8 6 Document Number: 93 ARE SUBECT TO SPECFC DSCLAMERS, SET FORTH AT /doc?

7 Peak Forward Current (A) E E3 E joules per pulse joules per pulse 0 SD03N/R..S5 Series Sinusoidal Pulse tp T = 5 C, V RRM = V dv/dt = 0 V/μs E E E E3 E Fig. 0 - Maximum Total Energy Loss Per Pulse Characteristics SD03N/R..S5 Series Trapezoidal Pulse tp T = 5 C, V RRM = V dv/dt = 0 V/μs, di/dt = A/μs E E E3 E Peak Forward Current (A) E E3 E tp SD03N/R..S0 Series Sinusoidal Pulse T = 5 C, V RRM = 7 V dv/dt = 0 V/μs E E E E3 E joules per pulse Fig. - Maximum Total Energy Loss Per Pulse Characteristics tp 0. E E E3 E 0 SD03N/R..S Series Trapezoidal Pulse T = 5 C, V RRM = 7 V dv/dt = 0 V/μs, di/dt = A/μs 0 joules per pulse Revision: -an-8 7 Document Number: 93 ARE SUBECT TO SPECFC DSCLAMERS, SET FORTH AT /doc?

8 ORDERNG NFORMATON TABLE Device code VS- SD 0 3 R 5 S0 P B C product - Diode 3 - Essential part number - 3 = fast recovery 5 - N = stud normal polarity (cathode to stud) R = stud reverse polarity (anode to stud) 6 - Voltage code x = V RRM (see Voltage Ratings table) 7 - t rr code (see Recovery Characteristics table) 8 - P = stud base DO-9 (DO-05AB) 3/" 6UNF-A M = stud base DO-9 (DO-05AB) M6 x B = flag top terminals (for cathode / anode leads) S = isolated lead with silicon sleeve (red = reverse polarity; blue = normal polarity) None = not isolated lead 0 - C = ceramic housing (over 0 V) V = glass-metal seal (only up to 0 V) Dimensions LNKS TO RELATED DOCUMENTS /doc?9530 Revision: -an-8 8 Document Number: 93 ARE SUBECT TO SPECFC DSCLAMERS, SET FORTH AT /doc?

9 Outline Dimensions DO-05AB (DO-9) DMENSONS in millimeters (inches) Ceramic housing 9 (0.75) MAX. (0.6) MAX. 9.5 (0.37) MN. 39 (.53) MAX. DA. 8.5 (0.33) NOM. C.S. 35 mm (0.05 s.i.) 0 (8.7) ± 0 (0.39) DA. 7.5 (.08) MAX. 8 (3.3) MN. SW 3 6 (0.63) MAX. (0.8) MAX. 3/"-6UNF-A* *For metric device: M6 x.5 contact factory Document Number: 9530 For technical questions, contact: indmodules@vishay.com Revision: 09-Apr-08

10 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECFCATONS AND DATA ARE SUBECT TO CHANGE WTHOUT NOTCE TO MPROVE RELABLTY, FUNCTON OR DESGN OR OTHERWSE. Vishay ntertechnology, nc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. t is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. 07 VSHAY NTERTECHNOLOGY, NC. ALL RGHTS RESERVED Revision: 08-Feb-7 Document Number: