Digital Control System Models. M. Sami Fadali Professor of Electrical Engineering University of Nevada
|
|
- Rolf Watkins
- 5 years ago
- Views:
Transcription
1 Digital Control System Models M. Sami Fadali Professor of Electrical Engineering University of Nevada 1
2 Outline Model of ADC. Model of DAC. Model of ADC, analog subsystem and DAC. Systems with transport lag. Examples 2
3 Common Digital Control System Configuration Computer or Microprocessor DAC Analog Subsystem ADC 3
4 Assume that ADC Model (i) ADC outputs are exactly equal in magnitude to their inputs. (i.e. neglect quantization errors). (ii) ADC yields digital output instantaneously. (iii) Sampling is perfectly uniform. Model ADC as ideal sampler with sampling period T. T 4
5 Assume that DAC DAC Model (i)outputs are exactly equal in magnitude to their inputs. (ii) yields an analog output instantaneously. (iii) outputs are constant over each sampling period. zero-order-hold: piecewise constant analog output. first-order hold constructs signals in terms of straight lines second-order hold constructs them in terms of parabolas. u k ZOH u t = u k, kt t < k + 1 T, k = 0,1,2, kt Zero-order Hold kt (k+1)t 5
6 Transfer Function of ZOH Use impulse sampling and Laplace transform of a unit pulse L 1 t = 1 s L 1 t T G ZOH s = 1 e st s = e st s kt (k+1)t 6
7 Effect of Sampler on Transfer Function of a Cascade In the s-domain Y s = H 2 s X s = H 2 s H 1 s U s = H eq s U s, H eq s = H 2 s H 1 s U(s) X(s) Y(s) H 1 (s) H 2 (s) 7
8 y t = න t 0 t Time Response h 2 t τ x τ dτ τ න h 1 τ λ u λ dλ dτ 0 = න h 2 t τ 0 Change order and variables of integration y t = න 0 t u t τ න 0 t = න u t τ h eq τ dτ 0 τ h 1 τ λ h 2 λ dλ dτ 8
9 Punch Line Equivalent impulse response for cascade = the convolution of cascaded impulse responses. Impossible to separate convolved time function h eq t = න 0 Sample the output y it = න 0 it t h 1 t λ h 2 λ dλ u it τ h eq τ dτ, i = 0, 1, 2,... 9
10 Convolving u t & CT Signal y t = 0 t h t τ u τ dτ t = න 0 h t τ k=0 u kt δ τ kt dτ Repetitions of the CT function each in the location of an impulse in the train U(s) U * (s) H(s) Y(s) 10
11 Sampled Output Change the order of summation and integration y t = k=0 = k=0 u kt න 0 Sample and transform y it = k=0 Y z = H z U z, t u kt h t kt u kt h it kt, h t τ δ τ kt dτ i = 0, 1, 2, Y s = H s U s 11
12 Transfer Function for Cascade Cascade not separated by samplers: components cannot be separated after sampling. Cascade separated by samplers: each block has a sampled output and input as well as a z-domain transfer function. n blocks not separated: Y s = H z U z = H 1 H 2 H n z U z n blocks separated: Y s = H z U z = H 1 z H 2 z H n z U z 12
13 Example Find the equivalent sampled impulse response sequence and the equivalent z-transfer function for the cascade of the two analog systems with sampled input (a) If the systems are directly connected. (b) If the systems are separated by a sampler. H 1 s = 1 s+2, H 2 s = 2 s+4 13
14 (a) Systems Directly Connected H s = 2 s + 2 s + 4 = 1 s s + 4 Impulse response h t = e 2t e 4t Sampled impulse response h kt = e 2kT e 4kT, z-transfer function H z = z z e 2T z z e 4T = k = 0,1,2, e 2T e 4T z z e 2T z e 4T 14
15 (b) Systems Separated By Samplers H 1 z = H z = z z e 2T, z e 2T Partial fractions H z = 2z 2 2 H 2 z e 2T e 4T z e 4T 2z z e 4T e 2T z e 4T z z e 2T z e 4T Impulse response sequence 2 h kt = e 2T e 4T e 2T e 2kT e 4T e 4kT 2 = e 2T e 4T e 2 k+1 T e 4 k+1 T, k = 0,1,2, 15
16 TF for DAC, Analog Subsystem, ADC Combination G ZA s = G s G ZOH s = 1 e st G s s g ZA t = g t g ZOH t = g s t g s t T g s t = L 1 G s s kt Zero-order kt (k+1)t Hold Analog Subsystem T 16
17 Impulse Response of DAC and Analog Subsystem Positive Step Delayed Negative Step time s time s (a) Response of analog system to step inputs. (b) Response of analog system to a unit pulse input. 17
18 Sample & z-transform Sampled impulse response g ZA kt = g s kt g s kt T z-transfer function of DAC (zero-order hold), analog subsystem, ADC (ideal sampler) cascade G ZAS z = 1 z 1 Z g s t = 1 z 1 Z L 1 G s s Simplify Notation G ZAS z = 1 z 1 Z G s s 18
19 Example Find the z-domain transfer function for ADC, DAC, and the shown series R-L circuit with the inductor voltage as output. R V in L V o 19
20 Voltage divider V o V o V in = Solution V in = τs Ls = Ls+R τs + 1, τ = L R Use G ZAS z = 1 z 1 Z G ZAS z = 1 z 1 Z = z 1 z z z e 1 s+1/τ G s L/R s L/R s+1 s T/τ = z 1 z e T/τ 20
21 Example Find the z-domain transfer function of an amplifier, an armature controlled DC motor, ADC and DAC if the s-domain transfer function of the motor and amplifier is G s = θ s V in s = K s τ m s
22 Solution G s s = K/τ m s 2 s + 1Ττ m Partial fraction expansion A 11 = G s s = K A 11 s 2 + A 12 s + A 2 s + 1Ττ m 1Ττ m = 1, A s + 1Ττ 12 = d m s=0 ds 1Ττ m = 1 s + 1Ττ m s=0 A 2 = 1Ττ m s 2 = τ m s= 1Ττ m 22
23 Solution (Cont.) G s Use G ZAS z = 1 z 1 Z s G ZAS z = 1 z 1 Z{K 1 s 2 τ m s + s + TΤτ m = Kτ m z z 1 z e TΤτ m G ZAS z = Kτ m Τ T τ m + e TΤτ m 1 z + 1 e TΤτ m z 1 z e Τ T τ m τ m Τ 1 τ m Τ T τ m
24 MATLAB Commands z-transfer function for ADC, DAC & analog subsystem. >> g= tf(num, den) % Enter analog transfer function >> gd= c2d(g,t, 'method') % Sampling period T 'method' = method to obtain the digital transfer function 24
25 MATLAB Example G s = 2s 2 + 4s + 3 s 3 + 4s 2 + 6s + 8 >> g = tf( [2,4,3], [1,4,6,8]) >> gd= c2d(g, 0.1, 'zoh') % zero-order hold >> gd = c2d(g, 0.1, 'foh') % first-order hold >> gd = c2d(g, 0.1, 'impulse') % z-transform T 25
26 Systems with Transport Lag Transfer function for systems with a transport delay G s = G a s e T ds T d = lt mt, 0 m < 1, l = T d = positive integer, m = l T d T Example: time delay = 3.1 s, T = 1 s l = 4 and m = 0.9 G ZAS z = 1 z 1 Z L 1 G l m Ts a s e s 26
27 Delay Theorem G ZAS z = z l 1 z 1 Z L 1 G a s s e mts Define the transfer function G s s = G a s Advance theorem of Laplace transforms G ZAS z = z l 1 z 1 Z L 1 G s s e mts s = z l 1 z 1 Z g s kt + mt 27
28 Use Modified z-transform G ZAS z = z l z 1 Z m g s kt Causal time function g s t = A 0 + σ n i=1 Sampling & shifting g s kt + mt = A 0 1 kt + mt + n i=1 A i e p it e p i kt+mt Shifting a step function has no effect on samples, shifting a decaying exponential does. 28
29 Modified z-transform Z m g s kt = A 0 z 1 + Transfer function G ZAS z = z l z 1 n i=1 n A 0 z 1 + i=1 Ai e p i mt z e p i T Ai e p i mt z e p i T 29
30 Example If the sampling period is 0.1 s, determine the z-transfer function for the ADC, DAC and analog transfer function G s = 3e 0.31s s
31 Solution Delay in terms of the sampling period T d = lt mt Integer l = T d = 3.1 = 4 m = l T d T = = 0.9 Partial fraction expansion G s s = 3 = 1 1 s s+3 s s+3 z-transfer function G ZAS z = z 4 1 z 1 z 1 e z e z G ZAS z = z z
32 CT Function g s t g s t t s 32
33 Block Diagram of Single-loop Digital Control System R(z) + E(z) C(z) U(z) G ZAS (z) Y(z) 33
34 Closed-loop Transfer Function G cl z = C z G ZAS z 1 + C z G ZAS z CL characteristic equation 1 + C z G ZAS z = 0 Closed-loop System Poles Roots of the characteristic equation (selected for desired time response specifications as in s-domain design) 34
35 Transport Delay >> g=tf(3,[1,3],'inputdelay', 0.31) Transfer function: 3 exp(-0.31*s) * s + 3 >> c2d(g,.1) Transfer function: z z^(-4) * z
EE451/551: Digital Control. Chapter 3: Modeling of Digital Control Systems
EE451/551: Digital Control Chapter 3: Modeling of Digital Control Systems Common Digital Control Configurations AsnotedinCh1 commondigitalcontrolconfigurations As noted in Ch 1, common digital control
More informationDiscrete-Time State-Space Equations. M. Sami Fadali Professor of Electrical Engineering UNR
Discrete-Time State-Space Equations M. Sami Fadali Professor of Electrical Engineering UNR 1 Outline Discrete-time (DT) state equation from solution of continuous-time state equation. Expressions in terms
More informationDigital Control Engineering Analysis and Design
Digital Control Engineering Analysis and Design M. Sami Fadali Antonio Visioli AMSTERDAM BOSTON HEIDELBERG LONDON NEW YORK OXFORD PARIS SAN DIEGO SAN FRANCISCO SINGAPORE SYDNEY TOKYO Academic Press is
More informationChapter 7. Digital Control Systems
Chapter 7 Digital Control Systems 1 1 Introduction In this chapter, we introduce analysis and design of stability, steady-state error, and transient response for computer-controlled systems. Transfer functions,
More informationEEE 188: Digital Control Systems
EEE 88: Digital Control Systems Lecture summary # the controlled variable. Example: cruise control. In feedback control, sensors and measurements play an important role. In discrete time systems, the control
More informationDIGITAL CONTROL OF POWER CONVERTERS. 3 Digital controller design
DIGITAL CONTROL OF POWER CONVERTERS 3 Digital controller design Frequency response of discrete systems H(z) Properties: z e j T s 1 DC Gain z=1 H(1)=DC 2 Periodic nature j Ts z e jt e s cos( jt ) j sin(
More informatione st f (t) dt = e st tf(t) dt = L {t f(t)} s
Additional operational properties How to find the Laplace transform of a function f (t) that is multiplied by a monomial t n, the transform of a special type of integral, and the transform of a periodic
More informationControl System Design
ELEC ENG 4CL4: Control System Design Notes for Lecture #4 Monday, January 13, 2003 Dr. Ian C. Bruce Room: CRL-229 Phone ext.: 26984 Email: ibruce@mail.ece.mcmaster.ca Impulse and Step Responses of Continuous-Time
More informationDynamic Response. Assoc. Prof. Enver Tatlicioglu. Department of Electrical & Electronics Engineering Izmir Institute of Technology.
Dynamic Response Assoc. Prof. Enver Tatlicioglu Department of Electrical & Electronics Engineering Izmir Institute of Technology Chapter 3 Assoc. Prof. Enver Tatlicioglu (EEE@IYTE) EE362 Feedback Control
More informationRoundoff Noise in Digital Feedback Control Systems
Chapter 7 Roundoff Noise in Digital Feedback Control Systems Digital control systems are generally feedback systems. Within their feedback loops are parts that are analog and parts that are digital. At
More informationDigital Control & Digital Filters. Lectures 13 & 14
Digital Controls & Digital Filters Lectures 13 & 14, Professor Department of Electrical and Computer Engineering Colorado State University Spring 2017 Systems with Actual Time Delays-Application 2 Case
More informationChapter 1 Fundamental Concepts
Chapter 1 Fundamental Concepts Signals A signal is a pattern of variation of a physical quantity as a function of time, space, distance, position, temperature, pressure, etc. These quantities are usually
More informationThe Laplace Transform
The Laplace Transform Generalizing the Fourier Transform The CTFT expresses a time-domain signal as a linear combination of complex sinusoids of the form e jωt. In the generalization of the CTFT to the
More informationContinuous and Discrete Time Signals and Systems
Continuous and Discrete Time Signals and Systems Mrinal Mandal University of Alberta, Edmonton, Canada and Amir Asif York University, Toronto, Canada CAMBRIDGE UNIVERSITY PRESS Contents Preface Parti Introduction
More informationCONTROL OF DIGITAL SYSTEMS
AUTOMATIC CONTROL AND SYSTEM THEORY CONTROL OF DIGITAL SYSTEMS Gianluca Palli Dipartimento di Ingegneria dell Energia Elettrica e dell Informazione (DEI) Università di Bologna Email: gianluca.palli@unibo.it
More informationLTI Systems (Continuous & Discrete) - Basics
LTI Systems (Continuous & Discrete) - Basics 1. A system with an input x(t) and output y(t) is described by the relation: y(t) = t. x(t). This system is (a) linear and time-invariant (b) linear and time-varying
More informationZ - Transform. It offers the techniques for digital filter design and frequency analysis of digital signals.
Z - Transform The z-transform is a very important tool in describing and analyzing digital systems. It offers the techniques for digital filter design and frequency analysis of digital signals. Definition
More informationThe Laplace Transform
The Laplace Transform Syllabus ECE 316, Spring 2015 Final Grades Homework (6 problems per week): 25% Exams (midterm and final): 50% (25:25) Random Quiz: 25% Textbook M. Roberts, Signals and Systems, 2nd
More informationAutomatique. A. Hably 1. Commande d un robot mobile. Automatique. A.Hably. Digital implementation
A. Hably 1 1 Gipsa-lab, Grenoble-INP ahmad.hably@grenoble-inp.fr Commande d un robot mobile (Gipsa-lab (DA)) ASI 1 / 25 Outline 1 2 (Gipsa-lab (DA)) ASI 2 / 25 of controllers Signals must be sampled and
More informationChapter 1 Fundamental Concepts
Chapter 1 Fundamental Concepts 1 Signals A signal is a pattern of variation of a physical quantity, often as a function of time (but also space, distance, position, etc). These quantities are usually the
More informationLecture 7: Laplace Transform and Its Applications Dr.-Ing. Sudchai Boonto
Dr-Ing Sudchai Boonto Department of Control System and Instrumentation Engineering King Mongkut s Unniversity of Technology Thonburi Thailand Outline Motivation The Laplace Transform The Laplace Transform
More informationSolution of ODEs using Laplace Transforms. Process Dynamics and Control
Solution of ODEs using Laplace Transforms Process Dynamics and Control 1 Linear ODEs For linear ODEs, we can solve without integrating by using Laplace transforms Integrate out time and transform to Laplace
More informationSchool of Engineering Faculty of Built Environment, Engineering, Technology & Design
Module Name and Code : ENG60803 Real Time Instrumentation Semester and Year : Semester 5/6, Year 3 Lecture Number/ Week : Lecture 3, Week 3 Learning Outcome (s) : LO5 Module Co-ordinator/Tutor : Dr. Phang
More informationOutline. Classical Control. Lecture 2
Outline Outline Outline Review of Material from Lecture 2 New Stuff - Outline Review of Lecture System Performance Effect of Poles Review of Material from Lecture System Performance Effect of Poles 2 New
More informationEE102 Homework 2, 3, and 4 Solutions
EE12 Prof. S. Boyd EE12 Homework 2, 3, and 4 Solutions 7. Some convolution systems. Consider a convolution system, y(t) = + u(t τ)h(τ) dτ, where h is a function called the kernel or impulse response of
More informationEECE 301 Signals & Systems Prof. Mark Fowler
EECE 3 Signals & Systems Prof. Mark Fowler Note Set #9 C-T Systems: Laplace Transform Transfer Function Reading Assignment: Section 6.5 of Kamen and Heck /7 Course Flow Diagram The arrows here show conceptual
More informationDigital Control Systems
Digital Control Systems Lecture Summary #4 This summary discussed some graphical methods their use to determine the stability the stability margins of closed loop systems. A. Nyquist criterion Nyquist
More informationz Transform System Analysis
z Transform System Analysis Block Diagrams and Transfer Functions Just as with continuous-time systems, discrete-time systems are conveniently described by block diagrams and transfer functions can be
More informationChapter 6: The Laplace Transform 6.3 Step Functions and
Chapter 6: The Laplace Transform 6.3 Step Functions and Dirac δ 2 April 2018 Step Function Definition: Suppose c is a fixed real number. The unit step function u c is defined as follows: u c (t) = { 0
More informationThe Laplace transform
The Laplace transform Samy Tindel Purdue University Differential equations - MA 266 Taken from Elementary differential equations by Boyce and DiPrima Samy T. Laplace transform Differential equations 1
More informationProblem Weight Score Total 100
EE 350 EXAM IV 15 December 2010 Last Name (Print): First Name (Print): ID number (Last 4 digits): Section: DO NOT TURN THIS PAGE UNTIL YOU ARE TOLD TO DO SO Problem Weight Score 1 25 2 25 3 25 4 25 Total
More informationSchool of Mechanical Engineering Purdue University. ME375 ElectroMechanical - 1
Electro-Mechanical Systems DC Motors Principles of Operation Modeling (Derivation of fg Governing Equations (EOM)) Block Diagram Representations Using Block Diagrams to Represent Equations in s - Domain
More informationAPPLICATIONS FOR ROBOTICS
Version: 1 CONTROL APPLICATIONS FOR ROBOTICS TEX d: Feb. 17, 214 PREVIEW We show that the transfer function and conditions of stability for linear systems can be studied using Laplace transforms. Table
More informationControl Systems Engineering (Chapter 2. Modeling in the Frequency Domain) Prof. Kwang-Chun Ho Tel: Fax:
Control Systems Engineering (Chapter 2. Modeling in the Frequency Domain) Prof. Kwang-Chun Ho kwangho@hansung.ac.kr Tel: 02-760-4253 Fax:02-760-4435 Overview Review on Laplace transform Learn about transfer
More informationSome of the different forms of a signal, obtained by transformations, are shown in the figure. jwt e z. jwt z e
Transform methods Some of the different forms of a signal, obtained by transformations, are shown in the figure. X(s) X(t) L - L F - F jw s s jw X(jw) X*(t) F - F X*(jw) jwt e z jwt z e X(nT) Z - Z X(z)
More informationSAMPLE EXAMINATION PAPER (with numerical answers)
CID No: IMPERIAL COLLEGE LONDON Design Engineering MEng EXAMINATIONS For Internal Students of the Imperial College of Science, Technology and Medicine This paper is also taken for the relevant examination
More informationIndex. Index. More information. in this web service Cambridge University Press
A-type elements, 4 7, 18, 31, 168, 198, 202, 219, 220, 222, 225 A-type variables. See Across variable ac current, 172, 251 ac induction motor, 251 Acceleration rotational, 30 translational, 16 Accumulator,
More informationGATE EE Topic wise Questions SIGNALS & SYSTEMS
www.gatehelp.com GATE EE Topic wise Questions YEAR 010 ONE MARK Question. 1 For the system /( s + 1), the approximate time taken for a step response to reach 98% of the final value is (A) 1 s (B) s (C)
More informationEC Signals and Systems
UNIT I CLASSIFICATION OF SIGNALS AND SYSTEMS Continuous time signals (CT signals), discrete time signals (DT signals) Step, Ramp, Pulse, Impulse, Exponential 1. Define Unit Impulse Signal [M/J 1], [M/J
More informationModule 4. Related web links and videos. 1. FT and ZT
Module 4 Laplace transforms, ROC, rational systems, Z transform, properties of LT and ZT, rational functions, system properties from ROC, inverse transforms Related web links and videos Sl no Web link
More informationChapter 31. The Laplace Transform The Laplace Transform. The Laplace transform of the function f(t) is defined. e st f(t) dt, L[f(t)] =
Chapter 3 The Laplace Transform 3. The Laplace Transform The Laplace transform of the function f(t) is defined L[f(t)] = e st f(t) dt, for all values of s for which the integral exists. The Laplace transform
More informationIntroduction & Laplace Transforms Lectures 1 & 2
Introduction & Lectures 1 & 2, Professor Department of Electrical and Computer Engineering Colorado State University Fall 2016 Control System Definition of a Control System Group of components that collectively
More informationEE/ME/AE324: Dynamical Systems. Chapter 7: Transform Solutions of Linear Models
EE/ME/AE324: Dynamical Systems Chapter 7: Transform Solutions of Linear Models The Laplace Transform Converts systems or signals from the real time domain, e.g., functions of the real variable t, to the
More informationUNIVERSITY OF BOLTON SCHOOL OF ENGINEERING BENG (HONS) IN BIOMEDICAL ENGINEERING SEMESTER 1 EXAMINATION 2017/2018 ADVANCED BIOMECHATRONIC SYSTEMS
ENG0016 UNIVERSITY OF BOLTON SCHOOL OF ENGINEERING BENG (HONS) IN BIOMEDICAL ENGINEERING SEMESTER 1 EXAMINATION 2017/2018 ADVANCED BIOMECHATRONIC SYSTEMS MODULE NO: BME6003 Date: Friday 19 January 2018
More informationLecture Discrete dynamic systems
Chapter 3 Low-level io Lecture 3.4 Discrete dynamic systems Lecture 3.4 Discrete dynamic systems Suppose that we wish to implement an embedded computer system that behaves analogously to a continuous linear
More informationStochastic Processes. M. Sami Fadali Professor of Electrical Engineering University of Nevada, Reno
Stochastic Processes M. Sami Fadali Professor of Electrical Engineering University of Nevada, Reno 1 Outline Stochastic (random) processes. Autocorrelation. Crosscorrelation. Spectral density function.
More informationSchool of Mechanical Engineering Purdue University. DC Motor Position Control The block diagram for position control of the servo table is given by:
Root Locus Motivation Sketching Root Locus Examples ME375 Root Locus - 1 Servo Table Example DC Motor Position Control The block diagram for position control of the servo table is given by: θ D 0.09 See
More informationDiscrete-Time David Johns and Ken Martin University of Toronto
Discrete-Time David Johns and Ken Martin University of Toronto (johns@eecg.toronto.edu) (martin@eecg.toronto.edu) University of Toronto 1 of 40 Overview of Some Signal Spectra x c () t st () x s () t xn
More informationSingle-Time-Constant (STC) Circuits This lecture is given as a background that will be needed to determine the frequency response of the amplifiers.
Single-Time-Constant (STC) Circuits This lecture is given as a background that will be needed to determine the frequency response of the amplifiers. Objectives To analyze and understand STC circuits with
More informationExercise 1a: Transfer functions
Exercise 1a: Transfer functions Transfer functions are a model form based on the Laplace transform. Transfer functions are very useful in analysis and design of linear dynamic systems. A general Transfer
More informationECEN 420 LINEAR CONTROL SYSTEMS. Lecture 2 Laplace Transform I 1/52
1/52 ECEN 420 LINEAR CONTROL SYSTEMS Lecture 2 Laplace Transform I Linear Time Invariant Systems A general LTI system may be described by the linear constant coefficient differential equation: a n d n
More informationStability. X(s) Y(s) = (s + 2) 2 (s 2) System has 2 poles: points where Y(s) -> at s = +2 and s = -2. Y(s) 8X(s) G 1 G 2
Stability 8X(s) X(s) Y(s) = (s 2) 2 (s 2) System has 2 poles: points where Y(s) -> at s = 2 and s = -2 If all poles are in region where s < 0, system is stable in Fourier language s = jω G 0 - x3 x7 Y(s)
More informationEach problem is worth 25 points, and you may solve the problems in any order.
EE 120: Signals & Systems Department of Electrical Engineering and Computer Sciences University of California, Berkeley Midterm Exam #2 April 11, 2016, 2:10-4:00pm Instructions: There are four questions
More informationLaplace Transforms Chapter 3
Laplace Transforms Important analytical method for solving linear ordinary differential equations. - Application to nonlinear ODEs? Must linearize first. Laplace transforms play a key role in important
More informationVideo 5.1 Vijay Kumar and Ani Hsieh
Video 5.1 Vijay Kumar and Ani Hsieh Robo3x-1.1 1 The Purpose of Control Input/Stimulus/ Disturbance System or Plant Output/ Response Understand the Black Box Evaluate the Performance Change the Behavior
More informationNoise - irrelevant data; variability in a quantity that has no meaning or significance. In most cases this is modeled as a random variable.
1.1 Signals and Systems Signals convey information. Systems respond to (or process) information. Engineers desire mathematical models for signals and systems in order to solve design problems efficiently
More informationInterconnection of LTI Systems
EENG226 Signals and Systems Chapter 2 Time-Domain Representations of Linear Time-Invariant Systems Interconnection of LTI Systems Prof. Dr. Hasan AMCA Electrical and Electronic Engineering Department (ee.emu.edu.tr)
More informationCHAPTER 1 Basic Concepts of Control System. CHAPTER 6 Hydraulic Control System
CHAPTER 1 Basic Concepts of Control System 1. What is open loop control systems and closed loop control systems? Compare open loop control system with closed loop control system. Write down major advantages
More informationUNIT 1. SIGNALS AND SYSTEM
Page no: 1 UNIT 1. SIGNALS AND SYSTEM INTRODUCTION A SIGNAL is defined as any physical quantity that changes with time, distance, speed, position, pressure, temperature or some other quantity. A SIGNAL
More informationDigital Control System
Digital Control Sytem Summary # he -tranform play an important role in digital control and dicrete ignal proceing. he -tranform i defined a F () f(k) k () A. Example Conider the following equence: f(k)
More informationFEEDBACK CONTROL SYSTEMS
FEEDBAC CONTROL SYSTEMS. Control System Design. Open and Closed-Loop Control Systems 3. Why Closed-Loop Control? 4. Case Study --- Speed Control of a DC Motor 5. Steady-State Errors in Unity Feedback Control
More informationANALOG AND DIGITAL SIGNAL PROCESSING CHAPTER 3 : LINEAR SYSTEM RESPONSE (GENERAL CASE)
3. Linear System Response (general case) 3. INTRODUCTION In chapter 2, we determined that : a) If the system is linear (or operate in a linear domain) b) If the input signal can be assumed as periodic
More informationSAMPLE SOLUTION TO EXAM in MAS501 Control Systems 2 Autumn 2015
FACULTY OF ENGINEERING AND SCIENCE SAMPLE SOLUTION TO EXAM in MAS501 Control Systems 2 Autumn 2015 Lecturer: Michael Ruderman Problem 1: Frequency-domain analysis and control design (15 pt) Given is a
More informationControl System Design
ELEC ENG 4CL4: Control System Design Notes for Lecture #27 Wednesday, March 17, 2004 Dr. Ian C. Bruce Room: CRL-229 Phone ext.: 26984 Email: ibruce@mail.ece.mcmaster.ca Discrete Delta Domain Models The
More informationAn Introduction to Control Systems
An Introduction to Control Systems Signals and Systems: 3C1 Control Systems Handout 1 Dr. David Corrigan Electronic and Electrical Engineering corrigad@tcd.ie November 21, 2012 Recall the concept of a
More informationLinear dynamical systems with inputs & outputs
EE263 Autumn 215 S. Boyd and S. Lall Linear dynamical systems with inputs & outputs inputs & outputs: interpretations transfer function impulse and step responses examples 1 Inputs & outputs recall continuous-time
More informationRecursive, Infinite Impulse Response (IIR) Digital Filters:
Recursive, Infinite Impulse Response (IIR) Digital Filters: Filters defined by Laplace Domain transfer functions (analog devices) can be easily converted to Z domain transfer functions (digital, sampled
More informationSimon Fraser University School of Engineering Science ENSC Linear Systems Spring Instructor Jim Cavers ASB
Simon Fraser University School of Engineering Science ENSC 380-3 Linear Systems Spring 2000 This course covers the modeling and analysis of continuous and discrete signals and systems using linear techniques.
More information06/12/ rws/jMc- modif SuFY10 (MPF) - Textbook Section IX 1
IV. Continuous-Time Signals & LTI Systems [p. 3] Analog signal definition [p. 4] Periodic signal [p. 5] One-sided signal [p. 6] Finite length signal [p. 7] Impulse function [p. 9] Sampling property [p.11]
More informationAdvanced Analog Building Blocks. Prof. Dr. Peter Fischer, Dr. Wei Shen, Dr. Albert Comerma, Dr. Johannes Schemmel, etc
Advanced Analog Building Blocks Prof. Dr. Peter Fischer, Dr. Wei Shen, Dr. Albert Comerma, Dr. Johannes Schemmel, etc 1 Topics 1. S domain and Laplace Transform Zeros and Poles 2. Basic and Advanced current
More informationLaplace Transform Part 1: Introduction (I&N Chap 13)
Laplace Transform Part 1: Introduction (I&N Chap 13) Definition of the L.T. L.T. of Singularity Functions L.T. Pairs Properties of the L.T. Inverse L.T. Convolution IVT(initial value theorem) & FVT (final
More informationINSTRUMENTAL ENGINEERING
INSTRUMENTAL ENGINEERING Subject Code: IN Course Structure Sections/Units Section A Unit 1 Unit 2 Unit 3 Unit 4 Unit 5 Unit 6 Section B Section C Section D Section E Section F Section G Section H Section
More informationFigure 1 A linear, time-invariant circuit. It s important to us that the circuit is both linear and time-invariant. To see why, let s us the notation
Convolution In this section we consider the problem of determining the response of a linear, time-invariant circuit to an arbitrary input, x(t). This situation is illustrated in Figure 1 where x(t) is
More informationMAE143A Signals & Systems - Homework 5, Winter 2013 due by the end of class Tuesday February 12, 2013.
MAE43A Signals & Systems - Homework 5, Winter 23 due by the end of class Tuesday February 2, 23. If left under my door, then straight to the recycling bin with it. This week s homework will be a refresher
More informationLecture 9 Infinite Impulse Response Filters
Lecture 9 Infinite Impulse Response Filters Outline 9 Infinite Impulse Response Filters 9 First-Order Low-Pass Filter 93 IIR Filter Design 5 93 CT Butterworth filter design 5 93 Bilinear transform 7 9
More informationProblem Set 3: Solution Due on Mon. 7 th Oct. in class. Fall 2013
EE 56: Digital Control Systems Problem Set 3: Solution Due on Mon 7 th Oct in class Fall 23 Problem For the causal LTI system described by the difference equation y k + 2 y k = x k, () (a) By first finding
More informationINC 341 Feedback Control Systems: Lecture 2 Transfer Function of Dynamic Systems I Asst. Prof. Dr.-Ing. Sudchai Boonto
INC 341 Feedback Control Systems: Lecture 2 Transfer Function of Dynamic Systems I Asst. Prof. Dr.-Ing. Sudchai Boonto Department of Control Systems and Instrumentation Engineering King Mongkut s University
More informationCONTROL SYSTEMS ENGINEERING Sixth Edition International Student Version
CONTROL SYSTEMS ENGINEERING Sixth Edition International Student Version Norman S. Nise California State Polytechnic University, Pomona John Wiley fir Sons, Inc. Contents PREFACE, vii 1. INTRODUCTION, 1
More informationMath 2C03 - Differential Equations. Slides shown in class - Winter Laplace Transforms. March 4, 5, 9, 11, 12, 16,
Math 2C03 - Differential Equations Slides shown in class - Winter 2015 Laplace Transforms March 4, 5, 9, 11, 12, 16, 18... 2015 Laplace Transform used to solve linear ODEs and systems of linear ODEs with
More informationA system that is both linear and time-invariant is called linear time-invariant (LTI).
The Cooper Union Department of Electrical Engineering ECE111 Signal Processing & Systems Analysis Lecture Notes: Time, Frequency & Transform Domains February 28, 2012 Signals & Systems Signals are mapped
More informationControl of Manufacturing Processes
Control of Manufacturing Processes Subject 2.830 Spring 2004 Lecture #18 Basic Control Loop Analysis" April 15, 2004 Revisit Temperature Control Problem τ dy dt + y = u τ = time constant = gain y ss =
More informationPD, PI, PID Compensation. M. Sami Fadali Professor of Electrical Engineering University of Nevada
PD, PI, PID Compensation M. Sami Fadali Professor of Electrical Engineering University of Nevada 1 Outline PD compensation. PI compensation. PID compensation. 2 PD Control L= loop gain s cl = desired closed-loop
More informationSystems Engineering and Control
Cork Institute of Technology Bachelor of Engineering (Honours) in Mechanical Engineering - Award (NFQ Level 8) Autumn 2007 Systems Engineering and Control (Time: 3 Hours) Answer any FIVE Questions Examiners:
More informationIntroduction to AC Circuits (Capacitors and Inductors)
Introduction to AC Circuits (Capacitors and Inductors) Amin Electronics and Electrical Communications Engineering Department (EECE) Cairo University elc.n102.eng@gmail.com http://scholar.cu.edu.eg/refky/
More informationIngegneria dell Automazione - Sistemi in Tempo Reale p.1/28
Ingegneria dell Automazione - Sistemi in Tempo Reale Selected topics on discrete-time and sampled-data systems Luigi Palopoli palopoli@sssup.it - Tel. 050/883444 Ingegneria dell Automazione - Sistemi in
More informationSignals and Systems. Spring Room 324, Geology Palace, ,
Signals and Systems Spring 2013 Room 324, Geology Palace, 13756569051, zhukaiguang@jlu.edu.cn Chapter 10 The Z-Transform 1) Z-Transform 2) Properties of the ROC of the z-transform 3) Inverse z-transform
More informationTime Response Analysis (Part II)
Time Response Analysis (Part II). A critically damped, continuous-time, second order system, when sampled, will have (in Z domain) (a) A simple pole (b) Double pole on real axis (c) Double pole on imaginary
More informationUniversity of Alberta ENGM 541: Modeling and Simulation of Engineering Systems Laboratory #7. M.G. Lipsett & M. Mashkournia 2011
ENG M 54 Laboratory #7 University of Alberta ENGM 54: Modeling and Simulation of Engineering Systems Laboratory #7 M.G. Lipsett & M. Mashkournia 2 Mixed Systems Modeling with MATLAB & SIMULINK Mixed systems
More informationEE482: Digital Signal Processing Applications
Professor Brendan Morris, SEB 3216, brendan.morris@unlv.edu EE482: Digital Signal Processing Applications Spring 2014 TTh 14:30-15:45 CBC C222 Lecture 05 IIR Design 14/03/04 http://www.ee.unlv.edu/~b1morris/ee482/
More informationIntroduction to Feedback Control
Introduction to Feedback Control Control System Design Why Control? Open-Loop vs Closed-Loop (Feedback) Why Use Feedback Control? Closed-Loop Control System Structure Elements of a Feedback Control System
More information1 x(k +1)=(Φ LH) x(k) = T 1 x 2 (k) x1 (0) 1 T x 2(0) T x 1 (0) x 2 (0) x(1) = x(2) = x(3) =
567 This is often referred to as Þnite settling time or deadbeat design because the dynamics will settle in a Þnite number of sample periods. This estimator always drives the error to zero in time 2T or
More informationCHBE320 LECTURE V LAPLACE TRANSFORM AND TRANSFER FUNCTION. Professor Dae Ryook Yang
CHBE320 LECTURE V LAPLACE TRANSFORM AND TRANSFER FUNCTION Professor Dae Ryook Yang Spring 2018 Dept. of Chemical and Biological Engineering 5-1 Road Map of the Lecture V Laplace Transform and Transfer
More informationMethods for analysis and control of. Lecture 6: Introduction to digital control
Methods for analysis and of Lecture 6: to digital O. Sename 1 1 Gipsa-lab, CNRS-INPG, FRANCE Olivier.Sename@gipsa-lab.inpg.fr www.lag.ensieg.inpg.fr/sename 6th May 2009 Outline Some interesting books:
More informationEE 3054: Signals, Systems, and Transforms Summer It is observed of some continuous-time LTI system that the input signal.
EE 34: Signals, Systems, and Transforms Summer 7 Test No notes, closed book. Show your work. Simplify your answers. 3. It is observed of some continuous-time LTI system that the input signal = 3 u(t) produces
More informationAnalysis and Design of Control Systems in the Time Domain
Chapter 6 Analysis and Design of Control Systems in the Time Domain 6. Concepts of feedback control Given a system, we can classify it as an open loop or a closed loop depends on the usage of the feedback.
More informationEL 625 Lecture 11. Frequency-domain analysis of discrete-time systems
EL 625 Leture 11 1 EL 625 Leture 11 Frequeny-domain analysis of disrete-time systems Theorem: If S is a fixed linear disrete-time system, the zero-state response, S{z k } = H(z)z k (1) Proof: S{z k } =
More informationEE -213 BASIC CIRCUIT ANALYSIS LAB MANUAL
EE -213 BASIC CIRCUIT ANALYSIS LAB MANUAL EE 213 Fall 2009 LABORATORY #1 INTRODUCTION TO MATLAB INTRODUCTION The purpose of this laboratory is to introduce you to Matlab and to illustrate some of its circuit
More informationReview of Linear Time-Invariant Network Analysis
D1 APPENDIX D Review of Linear Time-Invariant Network Analysis Consider a network with input x(t) and output y(t) as shown in Figure D-1. If an input x 1 (t) produces an output y 1 (t), and an input x
More informationFigure 1.1 (a) Model of a communication system, and (b) signal processing functions.
. Introduction to Signals and Operations Model of a Communication System [] Figure. (a) Model of a communication system, and (b) signal processing functions. Classification of Signals. Continuous-time
More information( ) ( = ) = ( ) ( ) ( )
( ) Vρ C st s T t 0 wc Ti s T s Q s (8) K T ( s) Q ( s) + Ti ( s) (0) τs+ τs+ V ρ K and τ wc w T (s)g (s)q (s) + G (s)t(s) i G and G are transfer functions and independent of the inputs, Q and T i. Note
More information