Chapter 1 1/92. Fundamentals
|
|
- Tracey Logan
- 5 years ago
- Views:
Transcription
1 Chapter 1 1/92 Fundamentals
2 Chapter 1 Fundamentals 2/92 Contents 1.1 Scope of Fluid Mechanics 1.2 Historical Perspective 1.3 Physical Characteristics of the Fluid State 1.4 Units and Density 1.5 Compressibility, Elasticity 1.6 Viscosity 1.7 Surface Tension, Capillarity 1.8 Vapor Pressure Objectives - Present concept of fluidity - Introduce fundamental properties of fluid
3 1.1 Scope of Fluid Mechanics 3/92 Problems of water supply flood prevention navigation water power irrigation need to know fluid phenomena
4 1.2 Historical Perspective 4/92 d'alembert (1744) "The theory of fluids must necessarily be based upon experiment" d'alembert paradox theory - ideal, inviscid fluid practice - real fluid (viscous) Two schools theoretical group hydrodynamics practical group hydraulics Navier and Stokes general equations for viscous fluid equation of motion
5 1.2 Historical Perspective 5/92 [Re] Navier-Stokes equation Claude-Louis Navier ( , French engineer) and George Gabriel Stokes ( , UK mathematician & physicist) - one continuity equation + three momentum equations - model the weather, ocean currents, water flow in a pipe, the air's flow around a wing, and motion of stars inside a galaxy - design of aircraft and cars, the study of blood flow, the design of power stations, the analysis of pollution, - exact solution - one of the seven most important open problems in mathematics
6 1.2 Historical Perspective 6/92 New problems in modern times - Dispersion of man's wastes in lakes, rivers, and oceans Environmental Fluid Mechanics (Hydraulics) state: solid liquid increasing spacing increasing inter fluid gaseous and latitude of molecular cohesive plasma particle motion force fluid continuum no voids or holes
7 1.3 Physical Characteristics of the Fluid State 7/92
8 1.3 Physical Characteristics of the Fluid State 8/92 stress solid strain fluid tension unable to support tension (surface tension) compression shear (tangential forces) elastic deformation permanent distortion elastic deformation (compressible fluid) permanent distortion or flo w (change shape) to infini tesimal shear stress
9 1.3 Physical Characteristics of the Fluid State 9/92 dv τ = µ dy
10 1.3 Physical Characteristics of the Fluid State 10/92 stress real fluid (viscous fluid) ideal fluid (non-viscous fluid) in motion at rest at rest and in motion compression (pressure) shear
11 1.3 Physical Characteristics of the Fluid State 11/92 incompressible fluid compressible fluid 1 Compressibility is of small important. 1 Compressibility is predominant. 2 Liquids and gases may be treated similarly. 2 Behavior of liquids and gases is quite dissimilar. 3 Fluid problems may be solved with the principles of mechanics. 3 Thermodynamics and heat transfer concepts must be used as well as principles of mechanics.
12 1.3 Physical Characteristics of the Fluid State 12/92 * Fluid does not resist any small shearing stress "Flow occurs" Properties of pressure (compression) 1 Pressure must be transmitted to solid boundaries normal to those boundaries. 2 At a point, pressure has the same magnitude in all directions. Pressure is a scalar quantity.
13 1.3 Physical Characteristics of the Fluid State 13/92 Weight W Vol. = γ
14 1.3 Physical Characteristics of the Fluid State 14/92 [Pf] F = 0 Apply Newton's law for static equilibrium F = p1dz p3dssinθ = 0 x F = p dx ρgdxdz / 2 p dscosθ = 0 z 2 3 (a) (b) Substitute following relations into Eq. (a) & (b) dx = dscosθ dz = dssinθ ( a) : p dssinθ p dssinθ = 0 p = p
15 1.3 Physical Characteristics of the Fluid State 15/92 dz ( b) : p2dscosθ ρg dscosθ p3dscosθ = p2 = p3+ ρgdz 2 As dz 0 then p2 p3 p1 = p2 = p3 at a point ( dx = dz = 0)
16 1.4 Units and Density 16/92 SI units - SI system metric system - Frequency ( f ): hertz (HZ = s -1 ) Force, F introduce Newton's 2nd law of motion F = ma Force = mass acceleration a= v/ t = L/ t v= L/ t F = 2 Lt 2 Lt 1 2 1kg m/s 1N( Newton) (m/s 2 ) (m/s)
17 1.4 Units and Density 17/92 Dimension SI unit English system (FSS) Length (L) metre (m) feet (ft) Mass (M) kilogram (kg) slug (-) Time (t) second (s) second (s) Temp. (T) kelvin (K) degree Rankine ( R)
18 1.4 Units and Density 18/92 Energy, E (work) E = FL = J Joule 2 2 kg m /s ( ) Power, P P= E/ t J / s= kg m s 2 3 Pressure, p ; Stress,, στ p= F / A N/m = Pa (pascal) = kg/m s 2 2 Temperature, T : degree Celsius ( C)
19 1.4 Units and Density 19/92 Density, ρ = mass per unit volume ~ depends on the number of molecules per unit of volume ~ decreases with increasing temperature ρ = M V 3 kg/m Specific weight (weight density), γ = weight (force) per unit volume W γ= N/m = kg/m s V 3 2 2
20 1.4 Units and Density 20/92 [Re] W g = Mg γ = ρg (Newton s 2 nd law of motion) = acceleration due to gravity (1.1) Specific volume=volume per unit mass= 1/ ρ Specific gravity, s.g., ~ r. d. (relative density) = ratio of density of a substance to the density of water at a specified temperature and pressure ρf γ f sg.. = = ρ γ w w
21 1.4 Units and Density 21/92 [Re] s.g. of sea water = 1.03 s.g. of soil = 2.65 s.g. of mercury = 13.6 Advantage of SI system and English FSS system ( F ) ( M ) 1 It distinguishes between force and mass. 2 It has no ambiguous definitions.
22 1.4 Units and Density 22/92 SI English system ρ 1,000 kg/m slugs/ft 3 γ 9,806 N/m lb/ft 3 g 9.81 m/s ft/s 2
23 1.4 Units and Density 23/92 Greek Alphabet α β γ, Γ δ, ε ζ η θ, Θ ι κ Alpha Beta [beitə] Gamma Delta Epsilon Zeta Eta Theta Iota [aioutə] Kappa [kæpə] angle angle specific weight, circulation thickness of boundary layer eddy viscosity, height of surface roughness
24 1.4 Units and Density 24/92 λ, Λ µ ν ξ ο π ρ Lambda Mu [mju:] Nu Xi [gzai, ksai] Omicron Pi [pai] Rho dynamic viscosity kinematic viscosity vorticity mass density σ, Sigma Sigma Xi, Scientific Research Society, 1886 τ υ, ϒ Tau Upsilon honor society for scientists & engineers shear
25 1.4 Units and Density 25/92 ϕ, Φ χ ψ, Ψ ω, Ω Phi [fai] Chi [kai] Psi [psai, sai] Omega Phi Beta Kappa stream function angular velocity Prefixes E exa P peta T tera G giga 10 9 M mega 10 6
26 1.4 Units and Density 26/92 M mega 10 6 k kilo 10 3 h hecto 10 2 da deca 10 1 d deci 10-1 c centi 10-2 m milli 10-3 µ micro 10-6 n nano 10-9 p pico f femto a atto 10-18
27 1.5 Compressibility, Elasticity 27/92 Elastic behavior to compression Compressibility change in volume due to change in pressure solid - modulus of elasticity, E (N/m 2 ) fluid - bulk modulus
28 1.5 Compressibility, Elasticity 28/92
29 1.5 Compressibility, Elasticity 29/92 Stress-strain curve (E, difficult to compress) dp dv V 1 1 dv dp = E V 1 dp dp E = = V 1 const = fn( p, T ) p E dv dv V 1 dv 1 C = = E V dp 1 Minus means that increase in pressure causes decrease in volume = modulus of compressibility (m 2 /N)
30 1.5 Compressibility, Elasticity 30/92 [Re] large E/small C less compressible incompressible fluid (inelastic): constant density ~ water ρ =const. E =, C 1 compressible fluid changes in density variable density ~ gas
31 1.5 Compressibility, Elasticity 31/92 Pressure 10 6 N/m 2 Temperature, C
32 1.5 Compressibility, Elasticity 32/92 - E increases as pressure increases. - E is maximum at about 50 C. The water has minimum compressibility at about 50 C. For the case of a fixed mass of liquid at constant temperature E = dp V1 dv V V 1 p E V V p p V E
33 1.5 Compressibility, Elasticity 33/92 Compressibility Modulus of Elasticity, E (kpa) steel 1/80 of water water 2,170,500 mercury 1/12.5 of water sea water 2,300,000 nitric acid 6 of water mercury 26,201,000
34 1.5 Compressibility, Elasticity 34/92 [Ex] For water; 6 E = 2, C p 6 2 = p Pa V V p p V E = 1 V = ( ) V 2 1 p = Pa Pa 기압 V 0.3% decrease water is incompressible
35 1.6 Viscosity 35/92 [Re] From Wikipedia Viscosity is a measure of the resistance of a fluid which is being deformed by either shear stress or tensile stress. Viscosity ~ "thickness" or "internal friction" water ~ "thin", having a lower viscosity honey ~ "thick", having a higher viscosity The less viscous the fluid is, the greater its ease of movement (fluidity). Viscosity describes a fluid's internal resistance to flow and may be thought of as a measure of fluid friction. dv τ = µ dy
36 1.6 Viscosity 36/92 For example, high-viscosity felsic magma will create a tall, steep stratovolcano, because it cannot flow far before it cools, while lowviscosity mafic lava will create a wide, shallow-sloped shield volcano. All real fluids (except superfluids) have some resistance to stress and therefore are viscous, but a fluid which has no resistance to shear stress is known as an ideal fluid or inviscid fluid. [Re] super fluid a fluid having frictionless flow, and other unusual properties
37 1.6 Viscosity 37/92 Two types of fluid motion (real fluid) 1) laminar flow: - viscosity plays a dominant role - fluid elements or particles slide over each other in layers (laminar) - molecular diffusion [Ex] flow in a very small tube, a very thin flow over the pavement, flow in the laminar flow table
38 1.6 Viscosity 38/92 2) turbulent flow: - random or chaotic motion, eddies of various sizes are seen - common in nature (streams, rivers, pipes) - large scale mixing between the layers [Ex] flows in the water supply pipe, flows in the storm sewer pipe, flows in the and canals and streams Reynolds number Re = Vd ν Diameter of pipe, Depth of stream where V = flow velocity; d = characteristic length; n = kinematic viscosity
39 1.6 Viscosity 39/92 Reynolds experiments laminar flow: Re < 2,100 transition: 2,100<Re < 4,000 turbulent flow: Re > 4,000 The same fluid with different velocity
40 1.6 Viscosity 40/92 Spiral secondary flow Secondary flow
41 1.6 Viscosity 41/92
42 1.6 Viscosity 42/92 cube streamline sink source
43 1.6 Viscosity 43/92 Smooth surface Eddying motion
44 1.6 Viscosity 44/92
45 1.6 Viscosity 45/92 Symmetric shape, No separation
46 1.6 Viscosity 46/92
47 1.6 Viscosity 47/92 Separation, eddy formation Growth of eddy
48 1.6 Viscosity 48/92
49 1.6 Viscosity 49/92
50 1.6 Viscosity 50/92 laminar flow strain = relative displacement [Cf] solid mechanics d2 d1 dvdt dv dζ = = = dt τ yx = G dy dy dy dy [Re] d = v dt; d = v dt d d = ( v v ) dt total angular displacement
51 1.6 Viscosity 51/92 no velocity at the boundary (no slip)
52 1.6 Viscosity 52/92 Experiment has shown that, in many fluids, shearing (frictional) stress per unit of contact area, strain. τ dv dv τ dt / dt = dy dy is proportional to the time rate of relative (velocity gradient) dv τ = µ Newton s equation of viscosity (1.2) dy where µ = coefficient of viscosity = dynamic (absolute) viscosity Large µ sticky, difficult to flow
53 1.6 Viscosity 53/92 viscosity = measure of fluid's resistance to shear or angular deformation = internal resistance of a fluid to motion (fluidity) [Re] Friction forces result from - cohesion for liquid - momentum interchange between molecules for gas [Re] angular deformation due to tangential stress
54 1.6 Viscosity 54/92 dy x
55 1.6 Viscosity 55/92 rate of angular deformation (i) displacement of AB relative to CD du du = u+ y t u = t y t dy dy (ii) angular displacement of AC = du du y t / y t dy = dy (iii) time rate of angular deformation du du = t / t = dy dy dv τ = µ dy
56 1.6 Viscosity 56/92 dynamic viscosity, µ τ = F / A [ τ ] MLT L ML T = / = kg/(m s ) = Pa dv LT dy L 1 1 = = T dv ML T [ µ ] = τ = = = = = dy T / ML T kg/m s N s / m Pa s 1 = 1 1 poises( Poiseuille) 10 Pa s
57 1.6 Viscosity 57/92 kinematic viscosity, µ ν = ρ [ ν ] ν ML T = = = ML LT m /s 3 (1.3) 1 m 2 /s = 10 4 stokes =10 6 centistokes Remarks on Eq. (1.2) τ, µ 1 are independent of pressure. [Cf] friction between two moving solids τ τ 2 Shear stress (even smallest ) will cause flow (velocity gradient).
58 1.6 Viscosity 58/92 3 Shearing stress in viscous fluids at rest will be zero. dv dy = 0 τ = 0 regardless of µ dv 4 At solid boundary, dy ( τ (no infinite shear)) Infinite shearing stress between fluid and solid is not possible. 5 Eq. 1.2 is limited to laminar (non-turbulent) fluid motion in which viscous action is predominant. [Cf] turbulent flow dv τ = ε dy where ε = eddy viscosity ε µ
59 1.6 Viscosity 59/92 6 Velocity at a solid boundary is zero. No slip condition (continuum assumption) Newtonian and non-newtonian fluids i) Newtonian fluid ~ water ii) Non-Newtonian fluid ~ plastic, blood, suspensions, paints, polymer solutions rheology
60 1.6 Viscosity 60/92
61 1.6 Viscosity 61/92 Non-Newtonian fluid dv 1) τ τ 1 = µ plastic, τ 1 = threshold dy Couette flow: n 2) dv τ = K n >1 dy Shear-thickening fluid n <1 Shear-thinning fluid laminar flow in which the shear stress is constant thin fluid film between two large flat plates thin fluid film between the surfaces of coaxial cylinders dv dy V = h V τ = µ h ~ linear velocity gradient ~ constant
62 1.6 Viscosity 62/92
63 1.6 Viscosity 63/92 Turbulent flow τ = ( µ + ε) dv dy ε = eddy viscosity = viscosity due to turbulent factor
64 1.6 Viscosity 64/92 gas liquid main cause of viscosity exchange of molecule's momentum interchange of molecules between the fluid layers of different velocities intermolecular cohesion effect of temperature variation temp molecular activity viscosity shearing stress temp cohesion viscosity shear stress
65 1.6 Viscosity 65/92 [Re] Exchange of momentum fast-speed layer (FSL) Two layers tend to stick together as if there is so me viscosity be tween two. molecules from FSL speed up molecules in LSL molecules from LSL slow down molecules in FSL low-speed layer (LSL)
66 1.6 Viscosity 66/92 1) exchange of momentum : exchange momentum in either direction from high to low or from low to high momentum due to random motion of molecules 2) transport of momentum : transport of momentum from layers of high mome (high velocity, mv ) to layers of low momentum
67 1.7 Surface Tension, Capillarity 67/92 surface tension - occur when the liquid surfaces are in contact with another fluid (air) or solid f n - (relative sizes of intermolecular cohesive and adhesive forces to another body) - as temp cohesion Table A2.4b, p. 694 σ some important engineering problems related to surface tension - capillary rise of liquids in narrow spaces - mechanics of bubble formation - formation of liquid drops - small models of larger prototype dam, river model
68 1.7 Surface Tension, Capillarity 68/92 surface tension, σ ( F / L, N/m) - force per unit length - force attracting molecules away from liquid Consider static equilibrium F = 0 (forces normal to the element abcd,,, ) ( p p ) dxdy = 2σdysinα + 2σdxsin β i 0 where p i = pressure inside the curvature; p o = pressure inside the curvature dx sin α =, 2R 1 sin 1 1 pi p0 = σ + R R dy 2R β = [ dx = 2( R sin α) ] (1.4)
69 1.7 Surface Tension, Capillarity 69/92
70 1.7 Surface Tension, Capillarity 70/92 Cylindrical capillary tube - due to both cohesion and adhesion cohesion < adhesion rise (water) cohesion > adhesion depression (mercury)
71 1.7 Surface Tension, Capillarity 71/92
72 1.7 Surface Tension, Capillarity 72/92 For a small tube, given conditions are as follows R1 = R2 = R (liquid surface section of sphere) Ch. 2 p0 p i = = γ h 0 2 γh = σ R (hydrostatic pressure) (atmospheric) p i 1 1 p0 = σ + R R Substitute above conditions into Eq. 1.15: (1.4) r = Rcosθ 2 2σcosθ γh = σ = r / cosθ r 2σ cosθ h = γ r By the way, 1 2 (1.5)
73 1.7 Surface Tension, Capillarity 73/92 h r h in which = capillary rise θ r = angle of contact = radius of tube 2.5 mm for spherical form [Ex] water and mercury Fig h If r > 12 mm, is negligible for water.
74 1.7 Surface Tension, Capillarity 74/92 cohesion > adhesion depression
75 1.7 Surface Tension, Capillarity 75/92 Pressure measurement using tubes in hydraulic experiments Ch.2 manometer ~ capillarity problems can be avoided entirely by providing tubes large enough to render the capillarity correction negligible. Fomation of curved surface, droplet - At free liquid surface contacting the air, cohesive forces at the outer layer are not balanced by a layer above. The surface molecules are pulled tightly to the lower layer. Free surface is curved. [Ex] Surface tension force supports small loads (water strider).
76 1.7 Surface Tension, Capillarity 76/92
77 1.7 Surface Tension, Capillarity 77/92 [IP 1.10] For a droplet of water (20 C), find diameter of droplet Given: pi p0 = 1.0 kpa At 20 C, σ = N/m App. 2 [Sol] pi 1 1 2σ p0 = σ + = R1 R2 R N/m 2 = 2(0.0728) R (1.4) R = m = 0.146mm d = mm
78 1.7 Surface Tension, Capillarity 78/92 [IP 1.11] Find height of capillary rise in a clean glass tube of 1 mm diameter if the water temperature is 10 C or 90 C. [Sol] From App. 2 Table A 2.4b; 10 C = N/m, = kn/m 3 90 C = N/m, = kn/m 3 γ γ
79 1.7 Surface Tension, Capillarity 79/92 Use Eq h = 2σ cosθ γ r For water, θ = 0 (1.5) 2(0.0742)(1) h`10 = = 9804(0.0005) 0.030m=30mm 2(0.0608)(1) h 90 = = 9466(0.0005) 0.026m=26mm
80 1.8 Vapor Pressure 80/92 vapor pressure = partial pressure exerted by ejected molecules of liquid Table A2.1 and A2.4b liquids ~ tend to vaporize or evaporate due to molecular thermal vibrations (molecular activity) change from liquid to gaseous phase temperature molecular activity vaporization vapor pressure
81 1.8 Vapor Pressure 81/92 volatile liquids: ~ easy to vaporize high vapor pressure p = v p = 55.2 kpa gasoline: at 20 C v v 2.34 kpa water: at 20 C p = kpa mercury: at 15.6 C mercury : low vapor pressure and high density = difficult to vaporize suitable for pressure-measuring devices
82 1.8 Vapor Pressure 82/92 Cavitation: App. 7 (p. 672) In a flow fluid wherever the local pressure falls to the vapor pressure of the liquid, local vaporization occurs. In the interior and/or boundaries of a liquid system Cavities are formed in the low pressure regions. High velocity region The cavity contains a swirling mass of droplets and vapor. Cavities are swept downstream into a region of high pressure. Then, cavities are collapses suddenly.
83 1.8 Vapor Pressure 83/92 surrounding liquid rush into the void together it causes erosion (pitting) of solid boundary surfaces in machines, and vibration boundary wall receives a blow as from a tiny hammer
84 1.8 Vapor Pressure 84/92
85 1.8 Vapor Pressure 85/92 Prevention of cavitation ~ cavitation is of great importance in the design of high-speed hydraulic machinery such as turbines, pumps, in the overflow and underflow structures of high dams, and in highspeed motion of underwater bodies (submarines, hydrofoils). design improved forms of boundary surfaces predict and control the exact nature of cavitation set limits Body cavitation
86 1.8 Vapor Pressure 86/92
87 1.8 Vapor Pressure 87/92 Boiling: = rapid rate of vaporization caused by an increase in temperature = formation of vapor bubbles throughout the fluid mass ~ occur (whatever the temperature) when the external absolute pressure imposed on the liquid is equal to or less than the vapor pressure of the liquid ~ boiling point = f (imposed pressure, temp.) p atm p v boiling occurs
88 1.8 Vapor Pressure 88/92 Table A 2.4b Table A 2.5b altitude (El. m) Temp. ( C) pv (kpa), absolute patm (kpa), absolute boiling point ( C) remark m.s.l , undercooked
89 1.8 Vapor Pressure 89/92 Evaporation: When the space surrounding the liquid is too large, the liquid continues to p v vaporize until the liquid is gone and only vapor remains at a pressure less than or equal. [IP 1.12] For a vertical cylinder of diameter 300 mm, find min. force that will cause the water boil.
90 1.8 Vapor Pressure 90/92 P atm =100 kpa 70 C
91 1.8 Vapor Pressure 91/92 [Sol] From Table A2.4b; =31.16 kpa at 70 C p v For water to boil; ' p p v =31.16, F A ' p = = 2 π (0.3) F = ( ) = 4.87 kn 4
92 1.8 Vapor Pressure 92/92 Homework Assignment # 1 Due: 1 week from today Prob. 1.2 Prob Prob Prob Prob Prob Prob Prob Prob. 1.82
Chapter 1 Fundamentals
Chapter 1 Fundamentals 1.1 Scope of Fluid Mechanics 1.2 Historical Perspective 1.3 Physical Characteristics of the Fluid State 1.4 Units, Density, Weight Density, Specific Volume, and Specific Gravity
More informationChapter 1 Fluid Characteristics
Chapter 1 Fluid Characteristics 1.1 Introduction 1.1.1 Phases Solid increasing increasing spacing and intermolecular liquid latitude of cohesive Fluid gas (vapor) molecular force plasma motion 1.1.2 Fluidity
More informationFluid Mechanics Introduction
Fluid Mechanics Introduction Fluid mechanics study the fluid under all conditions of rest and motion. Its approach is analytical, mathematical, and empirical (experimental and observation). Fluid can be
More informationFluid Mechanics-61341
An-Najah National University College of Engineering Fluid Mechanics-61341 Chapter [1] Fundamentals 1 The Book (Elementary Fluid Mechanics by Street, Watters and Vennard) Each chapter includes: Concepts
More informationCHAPTER 1 Fluids and their Properties
FLUID MECHANICS Gaza CHAPTER 1 Fluids and their Properties Dr. Khalil Mahmoud ALASTAL Objectives of this Chapter: Define the nature of a fluid. Show where fluid mechanics concepts are common with those
More informationHYDRAULICS STAFF SELECTION COMMISSION CIVIL ENGINEERING STUDY MATERIAL HYDRAULICS
1 STAFF SELECTION COMMISSION CIVIL ENGINEERING STUDY MATERIAL Syllabus Hydraulics ( Fluid Mechanics ) Fluid properties, hydrostatics, measurements of flow, Bernoulli's theorem and its application, flow
More informationIntroduction to Marine Hydrodynamics
1896 1920 1987 2006 Introduction to Marine Hydrodynamics (NA235) Department of Naval Architecture and Ocean Engineering School of Naval Architecture, Ocean & Civil Engineering First Assignment The first
More informationPart II Fundamentals of Fluid Mechanics By Munson, Young, and Okiishi
Part II Fundamentals of Fluid Mechanics By Munson, Young, and Okiishi WHAT we will learn I. Characterization of Fluids - What is the fluid? (Physical properties of Fluid) II. Behavior of fluids - Fluid
More informationT m / A. Table C2 Submicroscopic Masses [2] Symbol Meaning Best Value Approximate Value
APPENDIX C USEFUL INFORMATION 1247 C USEFUL INFORMATION This appendix is broken into several tables. Table C1, Important Constants Table C2, Submicroscopic Masses Table C3, Solar System Data Table C4,
More information1. Introduction, fluid properties (1.1, 2.8, 4.1, and handouts)
1. Introduction, fluid properties (1.1, 2.8, 4.1, and handouts) Introduction, general information Course overview Fluids as a continuum Density Compressibility Viscosity Exercises: A1 Fluid mechanics Fluid
More informationGeneral Physics. Prefixes. Aims: The Greek Alphabet Units. Provided Data
General Physics Aims: The Greek Alphabet Units Prefixes Provided Data Name Upper Case Lower Case The Greek Alphabet When writing equations and defining terms, letters from the Greek alphabet are often
More informationCHARACTERISTIC OF FLUIDS. A fluid is defined as a substance that deforms continuously when acted on by a shearing stress at any magnitude.
CHARACTERISTIC OF FLUIDS A fluid is defined as a substance that deforms continuously when acted on by a shearing stress at any magnitude. In a fluid at rest, normal stress is called pressure. 1 Dimensions,
More informationCHARACTERISTIC OF FLUIDS. A fluid is defined as a substance that deforms continuously when acted on by a shearing stress at any magnitude.
CHARACTERISTIC OF FLUIDS A fluid is defined as a substance that deforms continuously when acted on by a shearing stress at any magnitude. In a fluid at rest, normal stress is called pressure. 1 Dimensions,
More informationFluid Properties and Units
Fluid Properties and Units CVEN 311 Continuum Continuum All materials, solid or fluid, are composed of molecules discretely spread and in continuous motion. However, in dealing with fluid-flow flow relations
More informationINTRODUCTION DEFINITION OF FLUID. U p F FLUID IS A SUBSTANCE THAT CAN NOT SUPPORT SHEAR FORCES OF ANY MAGNITUDE WITHOUT CONTINUOUS DEFORMATION
INTRODUCTION DEFINITION OF FLUID plate solid F at t = 0 t > 0 = F/A plate U p F fluid t 0 t 1 t 2 t 3 FLUID IS A SUBSTANCE THAT CAN NOT SUPPORT SHEAR FORCES OF ANY MAGNITUDE WITHOUT CONTINUOUS DEFORMATION
More informationLecturer, Department t of Mechanical Engineering, SVMIT, Bharuch
Fluid Mechanics By Ashish J. Modi Lecturer, Department t of Mechanical Engineering, i SVMIT, Bharuch Review of fundamentals Properties of Fluids Introduction Any characteristic of a system is called a
More informationPetroleum Engineering Dept. Fluid Mechanics Second Stage Dr. Ahmed K. Alshara
Continents Chapter 1. Fluid Mechanics -Properties of fluids -Density, specific gravity, specific volume and Viscosity -Newtonian and non Newtonian fluids -Surface tension Compressibility -Pressure -Cavitations
More informationWe may have a general idea that a solid is hard and a fluid is soft. This is not satisfactory from
Chapter 1. Introduction 1.1 Some Characteristics of Fluids We may have a general idea that a solid is hard and a fluid is soft. This is not satisfactory from scientific or engineering point of view. In
More informationFluid Mechanics. Spring 2009
Instructor: Dr. Yang-Cheng Shih Department of Energy and Refrigerating Air-Conditioning Engineering National Taipei University of Technology Spring 2009 Chapter 1 Introduction 1-1 General Remarks 1-2 Scope
More informationA drop forms when liquid is forced out of a small tube. The shape of the drop is determined by a balance of pressure, gravity, and surface tension
A drop forms when liquid is forced out of a small tube. The shape of the drop is determined by a balance of pressure, gravity, and surface tension forces. 2 Objectives 3 i i 2 1 INTRODUCTION Property:
More informationAMME2261: Fluid Mechanics 1 Course Notes
Module 1 Introduction and Fluid Properties Introduction Matter can be one of two states: solid or fluid. A fluid is a substance that deforms continuously under the application of a shear stress, no matter
More informationMECHANICAL PROPERTIES OF FLUIDS
CHAPTER-10 MECHANICAL PROPERTIES OF FLUIDS QUESTIONS 1 marks questions 1. What are fluids? 2. How are fluids different from solids? 3. Define thrust of a liquid. 4. Define liquid pressure. 5. Is pressure
More informationch-01.qxd 8/4/04 2:33 PM Page 1 Part 1 Basic Principles of Open Channel Flows
ch-01.qxd 8/4/04 2:33 PM Page 1 Part 1 Basic Principles of Open Channel Flows ch-01.qxd 8/4/04 2:33 PM Page 3 Introduction 1 Summary The introduction chapter reviews briefly the basic fluid properties
More informationFE Fluids Review March 23, 2012 Steve Burian (Civil & Environmental Engineering)
Topic: Fluid Properties 1. If 6 m 3 of oil weighs 47 kn, calculate its specific weight, density, and specific gravity. 2. 10.0 L of an incompressible liquid exert a force of 20 N at the earth s surface.
More informationP = 1 3 (σ xx + σ yy + σ zz ) = F A. It is created by the bombardment of the surface by molecules of fluid.
CEE 3310 Thermodynamic Properties, Aug. 27, 2010 11 1.4 Review A fluid is a substance that can not support a shear stress. Liquids differ from gasses in that liquids that do not completely fill a container
More informationCOURSE NUMBER: ME 321 Fluid Mechanics I. Fluid: Concept and Properties
COURSE NUMBER: ME 321 Fluid Mechanics I Fluid: Concept and Properties Course teacher Dr. M. Mahbubur Razzaque Professor Department of Mechanical Engineering BUET 1 What is Fluid Mechanics? Fluid mechanics
More informationPetroleum Engineering Department Fluid Mechanics Second Stage Assist Prof. Dr. Ahmed K. Alshara
Continents Petroleum Engineering Department Fluid Mechanics Second Stage Assist Prof. Dr. Ahmed K. Alshara Chapter 1. Fluid Mechanics -Properties of fluids -Density, specific gravity, specific volume and
More informationLiquids and solids are essentially incompressible substances and the variation of their density with pressure is usually negligible.
Properties of Fluids Intensive properties are those that are independent of the mass of a system i.e. temperature, pressure and density. Extensive properties are those whose values depend on the size of
More informationDr. Nidal Hussein 7/15/2018
Dr. Nidal Hussein What is a Fluid? A fluid is defined as a substance that deforms continuously whilst acted upon by any force (shear force) tangential to the area on which it acts The ratio of the shear
More informationMECHANICAL PROPERTIES OF FLUIDS:
Important Definitions: MECHANICAL PROPERTIES OF FLUIDS: Fluid: A substance that can flow is called Fluid Both liquids and gases are fluids Pressure: The normal force acting per unit area of a surface is
More informationUniversity of Hail Faculty of Engineering DEPARTMENT OF MECHANICAL ENGINEERING. ME Fluid Mechanics Lecture notes. Chapter 1
University of Hail Faculty of Engineering DEPARTMENT OF MECHANICAL ENGINEERING ME 311 - Fluid Mechanics Lecture notes Chapter 1 Introduction and fluid properties Prepared by : Dr. N. Ait Messaoudene Based
More informationFluid Mechanics II Viscosity and shear stresses
Fluid Mechanics II Viscosity and shear stresses Shear stresses in a Newtonian fluid A fluid at rest can not resist shearing forces. Under the action of such forces it deforms continuously, however small
More informationTOPICS. Density. Pressure. Variation of Pressure with Depth. Pressure Measurements. Buoyant Forces-Archimedes Principle
Lecture 6 Fluids TOPICS Density Pressure Variation of Pressure with Depth Pressure Measurements Buoyant Forces-Archimedes Principle Surface Tension ( External source ) Viscosity ( External source ) Equation
More informationReview of Fluid Mechanics
Chapter 3 Review of Fluid Mechanics 3.1 Units and Basic Definitions Newton s Second law forms the basis of all units of measurement. For a particle of mass m subjected to a resultant force F the law may
More informationWelcome to MECH 280. Ian A. Frigaard. Department of Mechanical Engineering, University of British Columbia. Mech 280: Frigaard
Welcome to MECH 280 Ian A. Frigaard Department of Mechanical Engineering, University of British Columbia Lectures 1 & 2: Learning goals/concepts: What is a fluid Apply continuum hypothesis Stress and viscosity
More informationSteven Burian Civil & Environmental Engineering September 25, 2013
Fundamentals of Engineering (FE) Exam Mechanics Steven Burian Civil & Environmental Engineering September 25, 2013 s and FE Morning ( Mechanics) A. Flow measurement 7% of FE Morning B. properties Session
More informationChapter 9: Solids and Fluids
Chapter 9: Solids and Fluids State of matters: Solid, Liquid, Gas and Plasma. Solids Has definite volume and shape Can be crystalline or amorphous Molecules are held in specific locations by electrical
More informationClass Notes Fall 2014
57:020 Fluid Mechanics Class Notes Fall 2014 Prepared by: Professor Fred Stern Typed by: Stephanie Schrader (Fall 1999) Corrected by: Jun Shao (Fall 2003, Fall 2005) Corrected by: Jun Shao, Tao Xing (Fall
More informationBFC FLUID MECHANICS BFC NOOR ALIZA AHMAD
BFC 10403 FLUID MECHANICS CHAPTER 1.0: Principles of Fluid 1.1 Introduction to Fluid Mechanics 1.2 Thermodynamic Properties of a Fluid: Density, specific weight, specific gravity, viscocity (kelikatan)berat
More informationChapter 1: Basic Concepts
What is a fluid? A fluid is a substance in the gaseous or liquid form Distinction between solid and fluid? Solid: can resist an applied shear by deforming. Stress is proportional to strain Fluid: deforms
More informationHomework of chapter (1) (Solution)
بسم اهلل الرمحن الرحيم The Islamic University of Gaza, Civil Engineering Department, Fluid mechanics-discussion, Instructor: Dr. Khalil M. Al Astal T.A: Eng. Mohammed H El Nazli Eng. Sarah R Rostom First
More informationV (r,t) = i ˆ u( x, y,z,t) + ˆ j v( x, y,z,t) + k ˆ w( x, y, z,t)
IV. DIFFERENTIAL RELATIONS FOR A FLUID PARTICLE This chapter presents the development and application of the basic differential equations of fluid motion. Simplifications in the general equations and common
More informationFluid Mechanics Discussion. Prepared By: Dr.Khalil M. Al-Astal Eng.Ahmed S. Al-Agha Eng.Ruba M. Awad
Discussion Prepared By: Dr.Khalil M. Al-Astal Eng.Ahmed S. Al-Agha Eng.Ruba M. Awad 2014-2015 Chapter (1) Fluids and their Properties Fluids and their Properties Fluids (Liquids or gases) which a substance
More information1. The Properties of Fluids
1. The Properties of Fluids [This material relates predominantly to modules ELP034, ELP035] 1.1 Fluids 1.1 Fluids 1.2 Newton s Law of Viscosity 1.3 Fluids Vs Solids 1.4 Liquids Vs Gases 1.5 Causes of viscosity
More informationFluid Engineering Mechanics
Fluid Engineering Mechanics Chapter Fluid Properties: Density, specific volume, specific weight, specific gravity, compressibility, viscosity, measurement of viscosity, Newton's equation of viscosity,
More informationChapter 9. Solids and Fluids. States of Matter. Solid. Liquid. Gas
Chapter 9 States of Matter Solids and Fluids Solid Liquid Gas Plasma Solids Have definite volume Have definite shape Molecules are held in specific locations By electrical forces Vibrate about equilibrium
More informationDIMENSIONS AND UNITS
DIMENSIONS AND UNITS A dimension is the measure by which a physical variable is expressed quantitatively. A unit is a particular way of attaching a number to the quantitative dimension. Primary Dimension
More informations and FE X. A. Flow measurement B. properties C. statics D. impulse, and momentum equations E. Pipe and other internal flow 7% of FE Morning Session I
Fundamentals of Engineering (FE) Exam General Section Steven Burian Civil & Environmental Engineering October 26, 2010 s and FE X. A. Flow measurement B. properties C. statics D. impulse, and momentum
More information11.1 Mass Density. Fluids are materials that can flow, and they include both gases and liquids. The mass density of a liquid or gas is an
Chapter 11 Fluids 11.1 Mass Density Fluids are materials that can flow, and they include both gases and liquids. The mass density of a liquid or gas is an important factor that determines its behavior
More informationLecture 3. Properties of Fluids 11/01/2017. There are thermodynamic properties of fluids like:
11/01/2017 Lecture 3 Properties of Fluids There are thermodynamic properties of fluids like: Pressure, p (N/m 2 ) or [ML -1 T -2 ], Density, ρ (kg/m 3 ) or [ML -3 ], Specific weight, γ = ρg (N/m 3 ) or
More informationChapter 9. Solids and Fluids
Chapter 9 Solids and Fluids States of Matter Solid Liquid Gas Plasma Solids Have definite volume Have definite shape Molecules are held in specific locations By electrical forces Vibrate about equilibrium
More informationConvective Mass Transfer
Convective Mass Transfer Definition of convective mass transfer: The transport of material between a boundary surface and a moving fluid or between two immiscible moving fluids separated by a mobile interface
More informationNicholas J. Giordano. Chapter 10 Fluids
Nicholas J. Giordano www.cengage.com/physics/giordano Chapter 10 Fluids Fluids A fluid may be either a liquid or a gas Some characteristics of a fluid Flows from one place to another Shape varies according
More informationChapter 1 INTRODUCTION
Chapter 1 INTRODUCTION 1-1 The Fluid. 1-2 Dimensions. 1-3 Units. 1-4 Fluid Properties. 1 1-1 The Fluid: It is the substance that deforms continuously when subjected to a shear stress. Matter Solid Fluid
More informationME3250 Fluid Dynamics I
ME3250 Fluid Dynamics I Section I, Fall 2012 Instructor: Prof. Zhuyin Ren Department of Mechanical Engineering University of Connecticut Course Information Website: http://www.engr.uconn.edu/~rzr11001/me3250_f12/
More informationENGR 292 Fluids and Thermodynamics
ENGR 292 Fluids and Thermodynamics Scott Li, Ph.D., P.Eng. Mechanical Engineering Technology Camosun College Jan.13, 2017 Review of Last Class Course Outline Class Information Contact Information, Website
More informationFigure 3: Problem 7. (a) 0.9 m (b) 1.8 m (c) 2.7 m (d) 3.6 m
1. For the manometer shown in figure 1, if the absolute pressure at point A is 1.013 10 5 Pa, the absolute pressure at point B is (ρ water =10 3 kg/m 3, ρ Hg =13.56 10 3 kg/m 3, ρ oil = 800kg/m 3 ): (a)
More informationApplied Fluid Mechanics
Applied Fluid Mechanics 1. The Nature of Fluid and the Study of Fluid Mechanics 2. Viscosity of Fluid 3. Pressure Measurement 4. Forces Due to Static Fluid 5. Buoyancy and Stability 6. Flow of Fluid and
More informationChapter 9. Solids and Fluids
Chapter 9 Solids and Fluids States of Matter Solid Liquid Gas Plasma Solids Have definite volume Have definite shape Atoms or molecules are held in specific locations By electrical forces Vibrate about
More informationFluid dynamics - viscosity and. turbulent flow
Fluid dynamics - viscosity and Fluid statics turbulent flow What is a fluid? Density Pressure Fluid pressure and depth Pascal s principle Buoyancy Archimedes principle Fluid dynamics Reynolds number Equation
More informationContents. I Introduction 1. Preface. xiii
Contents Preface xiii I Introduction 1 1 Continuous matter 3 1.1 Molecules................................ 4 1.2 The continuum approximation.................... 6 1.3 Newtonian mechanics.........................
More information1 FLUIDS AND THEIR PROPERTIES
FLUID MECHANICS CONTENTS CHAPTER DESCRIPTION PAGE NO 1 FLUIDS AND THEIR PROPERTIES PART A NOTES 1.1 Introduction 1.2 Fluids 1.3 Newton s Law of Viscosity 1.4 The Continuum Concept of a Fluid 1.5 Types
More informationFluid Mechanics. The atmosphere is a fluid!
Fluid Mechanics The atmosphere is a fluid! Some definitions A fluid is any substance which can flow Liquids, gases, and plasmas Fluid statics studies fluids in equilibrium Density, pressure, buoyancy Fluid
More informationCPO Science Foundations of Physics. Unit 8, Chapter 27
CPO Science Foundations of Physics Unit 8, Chapter 27 Unit 8: Matter and Energy Chapter 27 The Physical Properties of Matter 27.1 Properties of Solids 27.2 Properties of Liquids and Fluids 27.3 Properties
More informationREE 307 Fluid Mechanics II. Lecture 1. Sep 27, Dr./ Ahmed Mohamed Nagib Elmekawy. Zewail City for Science and Technology
REE 307 Fluid Mechanics II Lecture 1 Sep 27, 2017 Dr./ Ahmed Mohamed Nagib Elmekawy Zewail City for Science and Technology Course Materials drahmednagib.com 2 COURSE OUTLINE Fundamental of Flow in pipes
More informationME3560 Tentative Schedule Spring 2019
ME3560 Tentative Schedule Spring 2019 Week Number Date Lecture Topics Covered Prior to Lecture Read Section Assignment Prep Problems for Prep Probs. Must be Solved by 1 Monday 1/7/2019 1 Introduction to
More informationChapter 10 - Mechanical Properties of Fluids. The blood pressure in humans is greater at the feet than at the brain
Question 10.1: Explain why The blood pressure in humans is greater at the feet than at the brain Atmospheric pressure at a height of about 6 km decreases to nearly half of its value at the sea level, though
More informationMiddle East Technical University Department of Mechanical Engineering ME 305 Fluid Mechanics I Fall 2018 Section 4 (Dr.
Reading Assignments Middle East Technical University Department of Mechanical Engineering ME 305 Fluid Mechanics I Fall 2018 Section 4 (Dr. Sert) Study Set 1 You can find the answers of some of the following
More information10 - FLUID MECHANICS Page 1
0 - FLUID MECHANICS Page Introduction Fluid is a matter in a state which can flow. Liquids, gases, molten metal and tar are examples of fluids. Fluid mechanics is studied in two parts: ( i ) Fluid statics
More informationChapter 10. Solids and Fluids
Chapter 10 Solids and Fluids Surface Tension Net force on molecule A is zero Pulled equally in all directions Net force on B is not zero No molecules above to act on it Pulled toward the center of the
More informationCE 6303 MECHANICS OF FLUIDS L T P C QUESTION BANK 3 0 0 3 UNIT I FLUID PROPERTIES AND FLUID STATICS PART - A 1. Define fluid and fluid mechanics. 2. Define real and ideal fluids. 3. Define mass density
More informationME3560 Tentative Schedule Fall 2018
ME3560 Tentative Schedule Fall 2018 Week Number 1 Wednesday 8/29/2018 1 Date Lecture Topics Covered Introduction to course, syllabus and class policies. Math Review. Differentiation. Prior to Lecture Read
More informationR09. d water surface. Prove that the depth of pressure is equal to p +.
Code No:A109210105 R09 SET-1 B.Tech II Year - I Semester Examinations, December 2011 FLUID MECHANICS (CIVIL ENGINEERING) Time: 3 hours Max. Marks: 75 Answer any five questions All questions carry equal
More informationChapter 9 Solids and Fluids. Elasticity Archimedes Principle Bernoulli s Equation
Chapter 9 Solids and Fluids Elasticity Archimedes Principle Bernoulli s Equation States of Matter Solid Liquid Gas Plasmas Solids: Stress and Strain Stress = Measure of force felt by material Stress= Force
More informationChapter 14. Fluid Mechanics
Chapter 14 Fluid Mechanics States of Matter Solid Has a definite volume and shape Liquid Has a definite volume but not a definite shape Gas unconfined Has neither a definite volume nor shape All of these
More informationMathematics Review Exercises. (answers at end)
Brock University Physics 1P21/1P91 Mathematics Review Exercises (answers at end) Work each exercise without using a calculator. 1. Express each number in scientific notation. (a) 437.1 (b) 563, 000 (c)
More informationFluid Mechanics. If deformation is small, the stress in a body is proportional to the corresponding
Fluid Mechanics HOOKE'S LAW If deformation is small, the stress in a body is proportional to the corresponding strain. In the elasticity limit stress and strain Stress/strain = Const. = Modulus of elasticity.
More informationStates of Matter. Chapter 9 Solids and Fluids. Solids: Stress and Strain. Solids: Stress and Strain. Stress = Force Area. Strain =!
Elasticity Chapter 9 Solids and Fluids Archimedes Principle Bernoulli s Equation Solid Liquid Gas Plasmas States of Matter 1 2 Solids: Stress and Strain Solids: Stress and Strain Stress = Measure of force
More informationStates of Matter. Chapter 9 Solids and Fluids. Solids: Stress and Strain. Solids: Stress and Strain. Stress = Force Area. Strain =!L L. Example 9.
Elasticity Chapter 9 Solids and Fluids Archimedes Principle Bernoulli s Equation Solid Liquid Gas Plasmas States of Matter Solids: Stress and Strain Solids: Stress and Strain Stress = Measure of force
More informationFluid Mechanics. du dy
FLUID MECHANICS Technical English - I 1 th week Fluid Mechanics FLUID STATICS FLUID DYNAMICS Fluid Statics or Hydrostatics is the study of fluids at rest. The main equation required for this is Newton's
More informationFluid Mechanics Prof. T.I. Eldho Department of Civil Engineering Indian Institute of Technology, Bombay. Lecture - 17 Laminar and Turbulent flows
Fluid Mechanics Prof. T.I. Eldho Department of Civil Engineering Indian Institute of Technology, Bombay Lecture - 17 Laminar and Turbulent flows Welcome back to the video course on fluid mechanics. In
More informationAerodynamics. Basic Aerodynamics. Continuity equation (mass conserved) Some thermodynamics. Energy equation (energy conserved)
Flow with no friction (inviscid) Aerodynamics Basic Aerodynamics Continuity equation (mass conserved) Flow with friction (viscous) Momentum equation (F = ma) 1. Euler s equation 2. Bernoulli s equation
More informationSummary PHY101 ( 2 ) T / Hanadi Al Harbi
الكمية Physical Quantity القانون Low التعريف Definition الوحدة SI Unit Linear Momentum P = mθ be equal to the mass of an object times its velocity. Kg. m/s vector quantity Stress F \ A the external force
More informationCE MECHANICS OF FLUIDS UNIT I
CE 6303- MECHANICS OF FLUIDS UNIT I 1. Define specific volume of a fluid and write its unit [N/D-14][M/J-11] Volume per unit mass of a fluid is called specific volume. Unit: m3 / kg. 2. Name the devices
More informationPrinciples of Convection
Principles of Convection Point Conduction & convection are similar both require the presence of a material medium. But convection requires the presence of fluid motion. Heat transfer through the: Solid
More informationStandard physical units
Standard physical units SI base units (SI = Système International d Unités) Basic quantity SI base unit Name Symbol Length metre m Mass kilogram kg Time second s Electric current ampere A Temperature (thermodynamic
More informationChapter -5(Section-1) Friction in Solids and Liquids
Chapter -5(Section-1) Friction in Solids and Liquids Que 1: Define friction. What are its causes? Ans : Friction:- When two bodies are in contact with each other and if one body is made to move then the
More informationChapter 14. Lecture 1 Fluid Mechanics. Dr. Armen Kocharian
Chapter 14 Lecture 1 Fluid Mechanics Dr. Armen Kocharian States of Matter Solid Has a definite volume and shape Liquid Has a definite volume but not a definite shape Gas unconfined Has neither a definite
More informationPHYSICS. Complete Study Material and 1000 Objective bits Useful for all SSC, RRB & Group Exams METRE
PHYSICS Complete Study Material and 1000 Objective bits Useful for all SSC, RRB & Group Exams PHYSICAL QUANTITIES The quantities like length, mass, time, temperature, area, volume and density, etc. which
More informationNon-Newtonian fluids is the fluids in which shear stress is not directly proportional to deformation rate, such as toothpaste,
CHAPTER1: Basic Definitions, Zeroth, First, and Second Laws of Thermodynamics 1.1. Definitions What does thermodynamic mean? It is a Greeks word which means a motion of the heat. Water is a liquid substance
More informationPlease remember all the unit that you use in your calculation. There are no marks for correct answer without unit.
CHAPTER 1 : PROPERTIES OF FLUIDS What is fluid? A fluid is defined as a substance that deforms continuously when acted on by a shearing stress at any magnitude. In a fluid at rest, normal stress is called
More informationFundamentals of Fluid Dynamics: Elementary Viscous Flow
Fundamentals of Fluid Dynamics: Elementary Viscous Flow Introductory Course on Multiphysics Modelling TOMASZ G. ZIELIŃSKI bluebox.ippt.pan.pl/ tzielins/ Institute of Fundamental Technological Research
More informationFORMULA SHEET. General formulas:
FORMULA SHEET You may use this formula sheet during the Advanced Transport Phenomena course and it should contain all formulas you need during this course. Note that the weeks are numbered from 1.1 to
More informationFluid Mechanics Theory I
Fluid Mechanics Theory I Last Class: 1. Introduction 2. MicroTAS or Lab on a Chip 3. Microfluidics Length Scale 4. Fundamentals 5. Different Aspects of Microfluidcs Today s Contents: 1. Introduction to
More informationThese variables have specific names and I will be using these names. You need to do this as well.
Greek Letters In Physics, we use variables to denote a variety of unknowns and concepts. Many of these variables are letters of the Greek alphabet. If you are not familiar with these letters, you should
More informationLesson 6 Review of fundamentals: Fluid flow
Lesson 6 Review of fundamentals: Fluid flow The specific objective of this lesson is to conduct a brief review of the fundamentals of fluid flow and present: A general equation for conservation of mass
More informationACE Engineering College
ACE Engineering College Ankushapur (V), Ghatkesar (M), R.R.Dist 501 301. * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * MECHANICS OF FLUIDS & HYDRAULIC
More informationLagrangian description from the perspective of a parcel moving within the flow. Streamline Eulerian, tangent line to instantaneous velocity field.
Chapter 2 Hydrostatics 2.1 Review Eulerian description from the perspective of fixed points within a reference frame. Lagrangian description from the perspective of a parcel moving within the flow. Streamline
More informationPhysics 207 Lecture 18
Physics 07, Lecture 8, Nov. 6 MidTerm Mean 58.4 (64.6) Median 58 St. Dev. 6 (9) High 94 Low 9 Nominal curve: (conservative) 80-00 A 6-79 B or A/B 34-6 C or B/C 9-33 marginal 9-8 D Physics 07: Lecture 8,
More informationME 262 BASIC FLUID MECHANICS Assistant Professor Neslihan Semerci Lecture 4. (Buoyancy and Viscosity of water)
ME 262 BASIC FLUID MECHANICS Assistant Professor Neslihan Semerci Lecture 4 (Buoyancy and Viscosity of water) 16. BUOYANCY Whenever an object is floating in a fluid or when it is completely submerged in
More information