Multi-Speed Three-Phase Induction Motors

Size: px
Start display at page:

Download "Multi-Speed Three-Phase Induction Motors"

Transcription

1 Multi-Speed Three-Phase Induction Motors Including Motors for Fan Applications Product Catalogue

2 Multi-Speed Three-Phase Induction Motors Certificates Cantoni Motor SA ISO 0 KEMA Since September 0, Besel SA ISO 0 DQS Since July, 99 00Q Indukta SA ISO 0 KEMA Since April, 99 ISO 00 KEMA Since July, Celma SA ISO 0 Germanischer Lloyd since June, 99 QS- HH ISO 00 Germanischer Lloyd Since November, 999 EM- HH Emit SA ISO 0 Polski Rejestr Statków Sine January, 99 NC-0/00 0 0

3 DESCRIPTION OF THE CATALOGUE VERSION Application general industrial, centrifugal machines Duty S voltage 00V Frequency 0 Hz Ambient temperature from - C to +0 C Mounting height up to 000 m above sea level of free shaft ends Insulation class F Degree of protection IP DESCRIPTION OF THE CUSTOMIZED VERSION Different duty type Different supply voltage Frequency 0 Hz of free shaft ends Insulation class H Degree of protection IP Tropicalization Other versions per customer s specifications Motor type designation s s Operating duty Supply voltage Frequency Mounting arragements Degree of protection Special requirements ORDERING INFORMATION When placing an order, the following motor data should be given: Information concerning additional accesories e.g. Thermal protection Anticondensation heaters Vibration sensors, etc. When ordering spare parts the following data should be given: Full motor type designation including its serial number Degree of protection Mounting arrangement Name of spare part of pieces As part of our development program, we reserve the right to alter or amend any of the specifications included in this catalogue without giving prior notice. 0

4 This catalogue covers industrial squirrel cage multi- motors for general application as well as for driving centrifugal machines such as fans. Our motors are designed for long life and reliable operation in severe industrial applications. All the motors are manufactured in Quality Assurance System consistent with ISO 0. ISO0 Multi- motors can be applied where a rough grading of is acceptable. In these motors the operation at two or more fixed s is obtained by changing the magnetic poles. Multi- motors can be either single winding - Dahlander connection where ratio is to or with two separate windings where ratio other than to can be obtained. Single winding motors are designed for direct starting from the supply and are single voltage. All the motors described in the present catalogue are provided with CE mark. It means that our products are consistent with the European Union directives regarding the safety measures. In this catalogue the motors designed especially for driving centrifugal machines are marked. In these motors the power at higher is much larger than at lower. It is because the demanded for this kind of applications varies as the square of the. The other motors can be used in applications with constant requirements such as mixers, conveyors. General technical information such as type of bearings, mounting arrangements, construction is the same as for standard motors and is described in catalogue: General Purpose -Phase Induction Motors. This catalogue contains also dimensional drawings of motors. The motors covered by this catalogue comply with the IEC 00- standard as well as standards effective in other countries, consistent with IEC. IEC This catalogue describes the most widely used multi- motors. Other types - for different fixed s can be supplied according to customer s specifications. 0

5 00/000 rpm - motors designed application rotor rotor Weight (IMB) P N n N T N N cos N I [00V] N T L/TN I L/IN T b/tn J m [HP] [rpm] [Nm] [%] [-] [A] [-] [-] [-] [kgm ] p=/ n =00/000 rpm s. Sh -/A. Sh -/AW. Sh -/B. Sh -/BW. Sh -/C. Sh 0-/A. Sh 0-/AW. Sh 0-/B 9. Sh 0-/BW 0. Sh S-/. Sh S-/W. Sh L-/. Sh L-/W. PSh L-/ ) 0, 0, 0,0 0, 0, 0, 0, 0, 0, 0,,00, 0,,,,, 0, 0, 0,09 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,, 0,,,, ,,0 0,,,,,09,0,,,,,,,,9 9,,9,,, ,,,,,,,9,, 0, 0, 0, 0, 0. 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,,, 0,,,,,, 0,,,,,,,,,,,,,,,,,,,,,,,,,,,,,9,,,,,,,,,,,,0,,,,9,9,,,,,,,,,,,,,,,,,,,,9,, 0,0000 0,0000 0,000 0,000 0, ,00 0,00 0,00 0,00 0,00 0,00 0,00 0,00 0,0,9,9,,,,, 0, 0,, )- mounting and overall dimensions are the same as for Motors with Increased Output. Highest at both s, Dahlander connection Centrifugal drive, Dahlander connection W U L V U W L V W U U V L W V L U V W U V W U V W U V W L L L L 0

6 00/000 rpm - motors designed application rotor rotor Weight (IMB) [Nm] p=/ N cos N I N [00V] [%] [-] [A] n s=00/000 rpm T L/TN I L/IN T b/tn J m [HP] [rpm] [-] [-] [-] [kgm ]. Sg 00L-/A. Sg 00L-/AW. Sg 00L-/B. Sg 00L-/BW 9. Sg M-/ 0. Sg M-/W. Sg S-/. Sg S-/W. Sg S-/WB. Sg M-/. Sg M-/B. Sg M-/W. Sg M-/WB. PSg M-/ ) 9. Sg 0M-/ 0. Sg 0M-/W. Sg 0L-/. Sg 0L-/W, 0,,,,,,,,,,,,,9,,,,,, 0 0,,,,,,,,,,,,,9 9,, 0, 9,, 0, 0,, ,,,,,,9,9,, 9,9 9, 9,, 0,,,, 9,,,9 9,,,,,9,,9,,9,9,,, 9,,,,,,9 9, 9, 9,9,,,,,,,, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 0, 0, 0, 0, 0, 0, 0, 0,,,,,,,, 9, 9,,,,,,,,,,,, 9,,,, 9,,9,,,,,,,,,,,,,,,,,0,,,,,,,,,,,,,9,,,9,9,,,,,,,,,,9,,,9,,,,,,9,,,,,,,,,,,9,,,,9,,,,9,,,,,,,,,,9,, 0,00 0,00 0,00 0,00 0,09 0,09 0,09 0,0 0,0 0,0 0,0 0,0 0,0 0,0 0,0 0,0 0,0 0,0,,, ) - mounting and overall dimensions are the same as for Motors with Increased Output. Highest at both s, Dahlander connection Centrifugal drive, Dahlander connection W U V W L V W L U U U V L W V L U V W U V W U V W U V W L L L L 0

7 00/000 rpm - motors designed application rotor rotor Weight (IMB) [rpm] p=/ N cos N I N [00V] [%] [-] [A] n s=00/000 rpm T L/TN I L/IN T b/tn J m [HP] [Nm] [-] [-] [-] [kgm ] Sg 0M-/ Sg 0M-/W Sg 0L-/ Sg 0L-/W Sg 00L/ Sg 00L/ Sg S/ Sg S/ Sg M/ Sg M/ Sg 0M/ Sg 0M/ Sg 0S/ Sg 0S/ Sg 0M/ Sg 0M/ Sg M/ 9, 9,, 0 9, 9 9, 0, ,,,,,9,,9 0, ,,,,,9 9 9,, 9, 9, 9, 9 9 9, 9, 9, 9, ,9 9, 9, 9, 9 9, 9, 9 0,9 0, 0, 0, 0, 0, 0, 0,, 0,,,, ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,9,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,9,,,,,,,,,,,,, 0, 0, 0, 0, 0, 0, 0, 0,, Highest at both s, Dahlander connection Centrifugal drive, Dahlander connection V W L V W W U L U U U V W V L L U V W U V W U V W U V W L L L L 0

8 000/00 rpm - motors designed application rotor rotor Weight (IMB) [HP] p=/ T N N cos N I N [00V] [Nm] [%] [-] [A] n s=000/00 rpm P N n N T L/TN I L/IN T b/tn J m [rpm] [-] [-] [-] [kgm ] Sh -/A Sh -/B Sh -/C Sh 0-/A Sh 0-/B Sh 0-/C Sh S-/ Sh L-/ Sh S-/W Sh L-/W Sg 00L-/A Sg 00L-/AW Sg 00L-/B Sg 00L-/BW Sg M-/ Sg M-/W 0,0 0, 0, 0, 0, 0, 0, 0, 0,0 0 0, 0, 0, 0,,,,, 0,0 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 0,,0 0,,,,,9,, ,,,9 9,,,,0,,0,,,,,,,9,,0,,,, 0, ,,,0,,9,9 9,,,,,,,9,0,, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,9 0, 0,,0, 0,,,,,,,9,,9,9,,,,,,,,,,,,0,,,,,,,,,,,,,,,,,,,0,0,,,,,,,,,,9,,,,,,,,,,,,,,,,,,,,,0,,,,,,,,,,,,,,,,0, 0,000 0,0009 0,00 0,009 0,000 0,009 0,00 0,00 0,00 0,00 0,00 0,00 0,009 0,009 0,00,0,9,,,,,,,,, Two separate windings, centirfugal drive or highest at both s L L U V W U V W U V W L L 09

9 000/00 rpm - motors designed application rotor rotor Weight (IMB) N cos N I N [00V] T L/TN I L/IN T b/tn J m [HP] [rpm] [Nm] [%] [-] [A] [-] [-] [-] [kgm ] p=/ n =000/00 rpm s Sg S-/ Sg S-/W Sg M-/ Sg M-/W Sg 0M-/ Sg 0M-/W Sg 0L-/ Sg 0L-/W Sg 0L-/ Sg 0L-/W,,,,,,,,,,, 0,, 0,,,,,,,,, 9,9, 9 9,,,, ,,,, 0, 9,,,,,9,,,,,, 9, 0 9,,,,,9,,, 9,,,, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,9 0, 0, 0, 0,,,9, 9,,,9,, 0,,9 9,9,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,9,,,,,,,,,,,,,9,,,,,,, 0,09 0,0 0,099 0,09 0,0 0,09 0,09 0,09 0,9 0, Two separate windings, centirfugal drive or highest at both s L L U V W U V W U V W L L 0

10 000/00 rpm - motors designed application rotor rotor Weight (IMB) N cos N I N [00V] T L/TN I L/IN T b/tn J m [HP] [rpm] [Nm] [%] [-] [A] [-] [-] [-] [kgm ] p=/ n =000/00 rpm s Sg 00L/ Sg 00L/ Sg S/ Sg S/ Sg M/ Sg M/ Sg 0M/ Sg 0M/ Sg 0S/ Sg 0/ Sg 0M/ Sg 0M/ Sg M/B Sg S/ Sg M/A Sg M/A , 9, 9,,, 9, 9,, 9,, 9,, 9, 9, 9, 9, , 9, 9 9, 9, 9, 0, 0, 0,9 0, 0, 0, 0, 0, 0, 0, ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,9,,,,,,,,,,,,9,,,,,9,,,9,,,,,,,,,,,, 0, 0, 0, 0, 0, 0,,,,,,, Two separate windings, centirfugal drive or highest at both s L L U V W U V W U V W L L

11 0/00 rpm - motors designed application rotor rotor Weight (IMB) [rpm] p=/ N cos N I N [00V] [%] [-] [A] n s=0/00 rpm T L/TN I L/IN T b/tn J m [HP] [Nm] [-] [-] [-] [kgm ] 9. Sh -/AW 9. Sh -/BW 9. Sh 0-/A 9. Sh 0-/AW 9. Sh 0-/B 9. Sh 0-/BW 9. Sh S-/ 99. Sh S-/W 00. Sh L-/ 0. Sh L-/W 0. Sg 00L-/W 0. Sg 00L-/A 0. Sg 00L-/AW 0. Sg 00L-/B 0. Sg 00L-/BW 0. Sg M-/ 0. Sg M-/W 09. Sg M-/BW 0,0 0, 0,09 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,, 0,,,, 0,0 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 9, 0,,, 0,,,, ,,,,,,,9,,9,0,,,,,9,,, 9,,,9, 9,0,, 0, 0, 0,, ,,9 9,9,,,,,,,,,,,,, 0,,,9, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 9 0, 0, 0, 0, 0, 0, 0, 0, 0,, 0,,, 0,,,,,,9,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,0,9,9,,,,,,,,,9,,,,,,,,,,,,,,,,,,,,,,,,,,,,, 0,000 0,0009 0,009 0,009 0,000 0,000 0,00 0,00 0,00 0,00 0,009 0,00 0,00 0,009 0,009 0,0 0,0 0,0,,,,,,,,,,, 9, Highest at both s, Dahlander connection Centrifugal drive, Dahlander connection U V W L V W W L U U U V W V L L U V W U V W U V W U V W L L L L

12 0/00 rpm - motors designed application rotor rotor Weight (IMB) N cos N I N [00V] T L/TN I L/IN T b/tn J m [HP] [rpm] [Nm] [%] [-] [A] [-] [-] [-] [kgm ] p=/ n s=0/00 rpm 0. Sg S-/. Sg S-/W. Sg S-/WB. Sg M-/. Sg M-/W. Sg M-/WB. Sg 0M-/. Sg 0M-/W. Sg 0L-/ 9. Sg 0L-/W 0. Sg 0L-/. Sg 0L-/W. Sg 00L/. Sg 00L/. Sg S/. Sg S/. Sg M/. Sg M/,,,,,,,,,,,,, 0,,9, 9,,,,,,,,, 9,, 9, 9 0, ,,,,9 0,, 9,,, 0,,9,9, 9, 9, 0,, ,,, 0, 0,,,,,,, 0,,,,,,9,,,,, 9,, 9 9, 9, 9,, 9, 9, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,,9,, 9,, 0,, 0,,, 9,,, 9,, 9, 0,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,9,,,,,,,,,,,,,,,,,,,,9,,,9,,,,,,,,,,,,,,,,,,, 0,09 0,0 0,0 0,099 0,0 0,0 0,0 0,0 0,09 0,09 0, 0, 0, 0, 0, 0, 0, 0, Highest at both s, Dahlander connection Centrifugal drive, Dahlander connection Two separate winding, centrifugal drive V W L V W W U L L U V W L U U U V L W V L U V W U V W U V W U V W U V W U V W L L L L L L

13 0/00 rpm - motors designed application rotor rotor Weight (IMB) [rpm] p=/ N cos N I N [00V] [%] [-] [A] n s=0/00 rpm T L/TN I L/IN T b/tn J m [HP] [Nm] [-] [-] [-] [kgm ]. Sg 0M/ 9. Sg 0M/ 0. Sg 0S/. Sg 0S/. Sg 0M/. Sg 0M/. Sg M/. Sg M/A. Sg M/B. Sg M/C. Sg M/C 9. Sg M/C 0. Sg M/C. Sg S/. Sg S/. Sg M/A. Sg M/A. Sg M/B. Sg M/B. Sg L/. Sg L/ ,,, 9, 9 9,, 9, 9 9, 9 9, 9, 9, , 9, 9, 9, 9, 9, 9 9, 9 9, 9, 9, 9 9,9 9, 9 9, 9 9, 9, 9, 9, 9,9 9, 9,9 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,9 0,9 0,9 0, 0,9 0, 0, 0, 0, 0, 0, 0, ,,,,,,,,,,,,,,,,,,,,,,,,,,,,,0,,,,,,,,,,,9,,9,,,,,,,,,,,9,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, Highest at both s, Dahlander connection Centrifugal drive, Dahlander connection U W V W L V W L U U U V W V L L U V W U V W U V W U V W L L L L

14 0/000 rpm - motors designed application rotor rotor Torque Weight (IMB) N cos N I N [00V] T L/TN I L/IN T b/tn J m [HP] [rpm] [Nm] [%] [-] [A] [-] [-] [-] [kgm ] p=/ n s=0/000 rpm 9. Sh S-/W 0. Sh L-/W. Sg 00L-/AW. Sg 00L-/BW. Sg M-/. Sg M-/W. Sg S-/W. Sg M-/AW. Sg M-/BW. Sg 0L-/ 9. Sg 00L/ 0. Sg S/. Sg M/. Sg 0M/. Sg 0S/. Sg 0M/. Sg M/. Sg M/A 0, 0, 0, 0, 0,0,,,,,,0, 0 0 0, 0, 0, 0, 0, 0,,,,,9,0,,, 0, ,,9,,,0 9,,00,,9, 0,0,0, ,,,,,, 9,,,,, 9 9,9 9, 0,,,,,, , 9, 9 0, 0, 0,9 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,9 0,9 0, 0,9 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,,,,,,9,,,,9,,,, 9,,,,,,,, ,,,,,,,,0,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,9,,,,,,,9,,,,9,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, 0,00 0,00 0,00 0,009 0,0 0,0 0,0 0,0 0,00 0, 0, 0,,,, 9,,,,9, Two separate windings, centirfugal drive or highest at both s L L U V W U V W U V W L L

15 00/000 rpm - motors designed application rotor rotor Weight (IMB) N cos N I N [00V] T L/TN I L/IN T b/tn J m [HP] [rpm] [Nm] [%] [-] [A] [-] [-] [-] [kgm ] p=/ n =00/000 rpm s. Sg M-/W. PSg M-/ 9. Sg 0M-/ 0. Sg 0L-/. Sg S/. Sg M/. Sg 0S/. Sg 0M/. Sg M/. Sg M/C. Sg M/A. Sg M/B 9. Sg M/B 0,,,,,,, ,,,,,,, 0, ,9,, 0,,,,0, ,,, 0,,, 0,, 0, 9, 9, 9,, 9, 9 9, 9, 9 9, 9, 9,9 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,,,, 9,,,,,,, 00, 99 0,9,,,,,,,,,,,,,,,,,0,,,9,,,,,,,,,,,,,,,,,,,,,,,,0,,,,,,,,,,,,,,,,,,,, 0,0 0,0 0,0 0,09 0, 0,,,, 9, Highest at both s, Dahlander connection Centrifugal drive, Dahlander connection U W V W L V W L U U U V W V L L U V W U V W U V W U V W L L L L

16 Three-Speed Motors 000/00/000 rpm 0/00/000 rpm rotor rotor Weight (IMB) N cos N I N [00V] T L/TN I L/IN T b/tn J m [HP] [rpm] [Nm] [%] [-] [A] [-] [-] [-] [kgm ] p=// n s=000/00/000 rpm 0. Sg 0M-//. Sg 0L-//,,,,,, 0,, , 0,,,,,, 0,,,, 0,9 0, 0,9 9,,,,, 0,,,,,,,,,,,,,, 0,0 0, Sg S-//. Sg 0M-//. Sg 0L-// L Medium V,,,,,, 9, U W,9,,, 9, 9,9 p=// L 9,, 9,,,, 9,,9 V U W n =0/00/000 rpm s 000/00/000 rpm: two separate windings, medium / high - Dahlander connection, highest at all s,, 9,,, 0, 0, 0, 0, 0, 0,,9,,,, 0,,,,,,,,,9,9,,,,,,,,,,,9 0,0 0,0 0, V W L U V U W U V W U V W U V W U V W U V W U V W L L L 0/00/000 rpm: two separate windings, low / medium - Dahlander connection, highest at all s Medium L V W L V W U V W L U U U V W U V W U V W U V W U V W U V W L L L

17 Three-Speed Motors 0/000/00 rpm rotor rotor Weight (IMB) [HP] [rpm] p=// T N N cos N I N [00V] [Nm] [%] [-] [A] n s=0/000/00 rpm P N n N T L/TN I L/IN T b/tn J m [-] [-] [-] [kgm ]. Sg S-//. Sg M-//. Sg 0M-//. Sg 0L-// 9. Sg 0L-//. Sg 00L// 9. Sg S// 9. Sg M// 9. Sg 0M// 9. Sg 0S// 9. Sg 0M// 9. Sg S//,,,9,,,,,9,, ,,,,,,,,,9 9, , 9, 0,,9,,,,,,,, 0,, ,,,,, 9, 9,,,,,,,,, , 9, 9 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,9 0, 0, 0, 0, 0,,9,,,, 9, 0,, 9,9 9,,, ,,,,,,,,,,,,,,,,,,,,,,,,,,,,9,,,9,,,,,9,,,,,,,,,,,,,,,,9,,,,,,,,,,9,,,,,,,9,,,,,,,,,,,,,,,,, 0,09 0,099 0,0 0,09 0, 0, 0, 0,,,, Two separate windings, low / high - Dahlander connection, highest at all s V W Medium L U V W L V W V W Medium U L V W L U U L U V L W U U V W U V W U V W U V W U V W U V W U V W U V W U V W U V W U V W U V W L L L L L L

18 Four-Speed Motors 00/00/000/00 rpm rotor rotor Weight (IMB) 9. Sg 0M-/// 9. Sg 0L-/// 99. Sg S/// 00. Sg S///,,,9,,,9, 9 Medium-lower N cos N I N [00V] T L/TN I L/IN T b/tn J m [HP] [rpm] [Nm] [%] [-] [A] [-] [-] [-] [kgm ] p=/// n s=00/0/000/00 rpm,,,,,,, 9 0, Two separate windings, highest at all s, low / medium-higher - Dahlander connection, medium-lower / high - Dahlander connection,,,,,,, 9 Medium-higher,, 9,, 9,,,,,,, 9 9 0, 0, 0, 0, 0,,,, 9, 9, 0, 0, 9 9,,,,,,,,,,,,,,,,9,,,,,,,,,,,,,,,,, 0,0 0,09 0,, U U V W V W L V W L V W L U V W L U U V U W U V W U V W U V W U V W U V W U V W U V W U V W U V W U V W U V W U V W L L L L Performance data placed on rated plates of the motors may be different from catalogue data as a result of number roundings. 9

MSBCCL Series Asynchronous Three-Phase Brake Motors With Squirrel Cage Rotor Direct Current Brake

MSBCCL Series Asynchronous Three-Phase Brake Motors With Squirrel Cage Rotor Direct Current Brake NEMA MOTOR GOST MOTOR IEC MOTOR MSBCCL Series Asynchronous Three-Phase Motors ith Squirrel Cage Rotor Direct Current PUMP D.C. MOTOR GENERATOR MSBCCL series-enclosed construction externally ventilated-sizes

More information

Single Phase Motors Technical Datasheets

Single Phase Motors Technical Datasheets Single Phase Motors Technical Datasheets EN A dynamic, strong and ambitious Group: Orange1 Holding is an international renown Group, one of the most important European manufacturers of single-phase and

More information

I/IN (D) Kriva momenta i struje Torque and current curves Moment und Strom Kurven. - a / r

I/IN (D) Kriva momenta i struje Torque and current curves Moment und Strom Kurven. - a / r I/IN (D) 4.5 M/M N Kriva momenta i struje Torque and current curves Moment und Strom Kurven 1459-69V,D/4 5kW/ 5Hz - a / r I/I N 9. I/I N (D) 4. 8. 3.5 7. 3. 6. 2.5 5. 2. 4. M/M N (D) 1.5 3. I/I N (Y) 1.

More information

Single Phase Motors Technical Datasheets

Single Phase Motors Technical Datasheets Single Phase Motors Technical Datasheets EN A dynamic, strong and ambitious Group: Orange1 Holding is an international renown Group, one of the most important European manufacturers of single-phase and

More information

ALUMINIUM CENTRIFUGAL FANS. 4 x M6 x OUTLET x M6 x 20

ALUMINIUM CENTRIFUGAL FANS. 4 x M6 x OUTLET x M6 x 20 DESCRIPTION Dutair LK-series industrial ventilators consist of a robust body made from die-cast aluminium alloy. Impellers are made of extruded aluminium. The asynchronous electric motors are maintenance

More information

ALUMINIUM CENTRIFUGAL FANS x M6 x x M6 x 16

ALUMINIUM CENTRIFUGAL FANS x M6 x x M6 x 16 LK4 DESCRIPTION Dutair LK-series industrial ventilators consist of a robust body made from die-cast aluminium alloy. Impellers are made of extruded aluminium. The asynchronous electric motors are maintenance

More information

ALUMINIUM CENTRIFUGAL FANS M20 4 x M5 x 10 INLET. 4 x M5 x 12

ALUMINIUM CENTRIFUGAL FANS M20 4 x M5 x 10 INLET. 4 x M5 x 12 BCT61 DESCRIPTION Dutair BCT-series aluminium centrifugal fans with open die-cast aluminium impellers and forward curved blades are suitable for material transport and high pressure applications. The asynchronous

More information

ALUMINIUM CENTRIFUGAL FANS. 4 x M6 x 16

ALUMINIUM CENTRIFUGAL FANS. 4 x M6 x 16 DESCRIPTION Dutair BCT-series aluminium centrifugal fans with open die-cast aluminium impellers and forward curved blades are suitable for material transport and high pressure applications. The asynchronous

More information

AC axial compact fan

AC axial compact fan ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-767 Mulfingen Phone +9 798 8- Fax +9 798 8- info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court Stuttgart HRA 59

More information

AC axial compact fan

AC axial compact fan ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-7467 Mulfingen Phone +49 798 8-0 Fax +49 798 8-0 info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen County court Stuttgart HRA

More information

AC axial fan. Limited partnership Headquarters Mulfingen Amtsgericht (court of registration) Stuttgart HRA

AC axial fan. Limited partnership Headquarters Mulfingen Amtsgericht (court of registration) Stuttgart HRA ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-767 Mulfingen Phone +9 798 8-0 Fax +9 798 8-0 info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen Amtsgericht (court of registration)

More information

08/072 PKZ2 Motor-Protective Circuit-Breakers Tripping Characteristics

08/072 PKZ2 Motor-Protective Circuit-Breakers Tripping Characteristics 0/07 PKZ Tripping Characteristics Moeller HPL0-00/00 S-PKZ high-capacity contact module, SEA-PKZ contact module Normal switching duty AC-/00V kw A Rated output of three-phase motors 0...0 Hz. 7..... 0.7

More information

Digital AC Motors MHD

Digital AC Motors MHD Digital AC Motors MHD090 8-1 8 MHD090 8.1 Technical Data Description Symbol Unit MHD090B-035 Type of cooling Natural Natural Surface Liquid Motor overtemperature 60 K 100 K 60 K/100 K 60 K/100 K Electric

More information

AC axial compact fan

AC axial compact fan ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-767 Mulfingen Phone +9 798 8-0 Fax +9 798 8-0 info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen Amtsgericht (court of registration)

More information

Induction Motors. The single-phase induction motor is the most frequently used motor in the world

Induction Motors. The single-phase induction motor is the most frequently used motor in the world Induction Motor The single-phase induction motor is the most frequently used motor in the world Most appliances, such as washing machines and refrigerators, use a single-phase induction machine Highly

More information

AC axial fan. Limited partnership Headquarters Mulfingen Amtsgericht (court of registration) Stuttgart HRA

AC axial fan. Limited partnership Headquarters Mulfingen Amtsgericht (court of registration) Stuttgart HRA ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-767 Mulfingen Phone +9 798 8- Fax +9 798 8- info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen Amtsgericht (court of registration)

More information

Parameter Estimation of Three Phase Squirrel Cage Induction Motor

Parameter Estimation of Three Phase Squirrel Cage Induction Motor International Conference On Emerging Trends in Mechanical and Electrical Engineering RESEARCH ARTICLE OPEN ACCESS Parameter Estimation of Three Phase Squirrel Cage Induction Motor Sonakshi Gupta Department

More information

DBS315 1-phase SIDE CHANNEL BLOWERS

DBS315 1-phase SIDE CHANNEL BLOWERS DBS15/ 1-phase DESCRIPTION Dutair blowers for pressure and vacuum are compact machines consisting of an electric motor with a built-on pump housing. The rotational speed of the impeller creates a high

More information

CHAPTER 5 SIMULATION AND TEST SETUP FOR FAULT ANALYSIS

CHAPTER 5 SIMULATION AND TEST SETUP FOR FAULT ANALYSIS 47 CHAPTER 5 SIMULATION AND TEST SETUP FOR FAULT ANALYSIS 5.1 INTRODUCTION This chapter describes the simulation model and experimental set up used for the fault analysis. For the simulation set up, the

More information

Siemens AG Rated Rated current 1FK7 Compact. I rated (15.4) 11.5 (25.4) (2.9) 3.3 (4.4)

Siemens AG Rated Rated current 1FK7 Compact. I rated (15.4) 11.5 (25.4) (2.9) 3.3 (4.4) Synchronous motors Siemens FK7 Compact motors Nural cooling Selection and ordering da Red speed Shaft height Red Stic torque Red Red FK7 Compact torque ) synchronous motor Nural cooling Number of pole

More information

APEX DYNAMICS, INC. Staianless

APEX DYNAMICS, INC. Staianless APEX DYNAMICS, INC. HIGH PRECISION PLANETARY GEARBOXES AE / AER Series Staianless High precision high speed planetary gearboxes AE / AER series Apex Dynamics, Inc. is the world s most productive manufacturer

More information

Lesson 17: Synchronous Machines

Lesson 17: Synchronous Machines Lesson 17: Synchronous Machines ET 332b Ac Motors, Generators and Power Systems Lesson 17_et332b.pptx 1 Learning Objectives After this presentation you will be able to: Explain how synchronous machines

More information

JRE SCHOOL OF Engineering

JRE SCHOOL OF Engineering JRE SCHOOL OF Engineering Class Test-1 Examinations September 2014 Subject Name Electromechanical Energy Conversion-II Subject Code EEE -501 Roll No. of Student Max Marks 30 Marks Max Duration 1 hour Date

More information

MATLAB SIMULINK Based DQ Modeling and Dynamic Characteristics of Three Phase Self Excited Induction Generator

MATLAB SIMULINK Based DQ Modeling and Dynamic Characteristics of Three Phase Self Excited Induction Generator 628 Progress In Electromagnetics Research Symposium 2006, Cambridge, USA, March 26-29 MATLAB SIMULINK Based DQ Modeling and Dynamic Characteristics of Three Phase Self Excited Induction Generator A. Kishore,

More information

EC 60 TM 200W 48V. with brushless drive. brushless small & compact maintenance-free Protection IP65. Ordering Data

EC 60 TM 200W 48V. with brushless drive. brushless small & compact maintenance-free Protection IP65. Ordering Data EC-Servo motors with brushless drive EC 0 TM 200W 48V brushless small & compact maintenance-free Protection IP Ordering Data characteristics permanently energized -phase synchronous motor incremental position

More information

AC axial compact fan

AC axial compact fan ebm-papst Mulfingen GmbH & Co. KG Bachmühle D-767 Mulfingen Phone +9 798 8-0 Fax +9 798 8-0 info@de.ebmpapst.com www.ebmpapst.com Limited partnership Headquarters Mulfingen Amtsgericht (court of registration)

More information

INDUCTION MOTOR MODEL AND PARAMETERS

INDUCTION MOTOR MODEL AND PARAMETERS APPENDIX C INDUCTION MOTOR MODEL AND PARAMETERS C.1 Dynamic Model of the Induction Motor in Stationary Reference Frame A three phase induction machine can be represented by an equivalent two phase machine

More information

BNA Series. PLENUM FAN with Backward Wheels

BNA Series. PLENUM FAN with Backward Wheels BNA Series PLENUM FAN with Backward Wheels BNA Series BNA Series Plenum Fans Backward wheels Kruger Plenum Fans are designed for air handling applications where the fan operates unhoused within a plenum.

More information

CHAPTER 3 INFLUENCE OF STATOR SLOT-SHAPE ON THE ENERGY CONSERVATION ASSOCIATED WITH THE SUBMERSIBLE INDUCTION MOTORS

CHAPTER 3 INFLUENCE OF STATOR SLOT-SHAPE ON THE ENERGY CONSERVATION ASSOCIATED WITH THE SUBMERSIBLE INDUCTION MOTORS 38 CHAPTER 3 INFLUENCE OF STATOR SLOT-SHAPE ON THE ENERGY CONSERVATION ASSOCIATED WITH THE SUBMERSIBLE INDUCTION MOTORS 3.1 INTRODUCTION The electric submersible-pump unit consists of a pump, powered by

More information

EE ELECTRICAL ENGINEERING DRAWING

EE ELECTRICAL ENGINEERING DRAWING EE09 605 ELECTRICAL ENGINEERING DRAWING Akhil A. Balakrishnan 1 1 Department of Electrical & Electronics Engineering Jyothi Engineering College, Cheruthuruthy As on February 24, 2014 Akhil A. Balakrishnan

More information

CNA-CNB. Centrifugal fans

CNA-CNB. Centrifugal fans NA-NB entrifugal fans Product facts Product Single-inlet low-pressure fans with backward-curved blades. Use In industrial ventilation systems for uncontaminated, non-corrosive air, max. 70 º, where a low

More information

Chapter 6: Efficiency and Heating. 9/18/2003 Electromechanical Dynamics 1

Chapter 6: Efficiency and Heating. 9/18/2003 Electromechanical Dynamics 1 Chapter 6: Efficiency and Heating 9/18/2003 Electromechanical Dynamics 1 Losses As a machine transforms energy from one form to another there is always a certain power loss the loss is expressed as heat,

More information

FIELD-CIRCUIT ANALYSIS OF AC MACHINE TAKING INTO ACCOUNT STATOR WINDING ASYMMETRY

FIELD-CIRCUIT ANALYSIS OF AC MACHINE TAKING INTO ACCOUNT STATOR WINDING ASYMMETRY Prace Naukowe Instytutu Maszyn, Napędów i Pomiarów Elektrycznych Nr 66 Politechniki Wrocławskiej Nr 66 Studia i Materiały Nr 32 22 Wojciech PIETROWSKI* winding asymmetry, induction machine, axial flux,

More information

8 Installation Equipment

8 Installation Equipment 8 Installation Equipment Plugs and Sockets CES System Series 8, 88, 8, 881 Te plugs and sockets in te CES system comply wit CEE publication 1 and European standards EN 0 01. Te small 1 A socket as switcing

More information

DATA SHEET WIEGAND WIRE SENSOR WS-UTS-0-U0, WS-UFS-0-U0

DATA SHEET WIEGAND WIRE SENSOR WS-UTS-0-U0, WS-UFS-0-U0 Wiegand Wire Sensor for energy harvesting multiturn encoders using the Wiegand effect to generate energy from a rotating magnetic field 1 Optimized for operation with the multiturn counter module ic-pmz

More information

Effect of the number of poles on the acoustic noise from BLDC motors

Effect of the number of poles on the acoustic noise from BLDC motors Journal of Mechanical Science and Technology 25 (2) (211) 273~277 www.springerlink.com/content/1738-494x DOI 1.17/s1226-1-1216-4 Effect of the number of poles on the acoustic noise from BLDC motors Kwang-Suk

More information

Tutorial 1 (EMD) Rotary field winding

Tutorial 1 (EMD) Rotary field winding Tutorial 1 (EMD) Rotary field winding The unchorded two-layer three-phase winding of a small synchronous fan drive for a computer has the following parameters: number of slots per pole and phase q = 1,

More information

UNIT I INTRODUCTION Part A- Two marks questions

UNIT I INTRODUCTION Part A- Two marks questions ROEVER COLLEGE OF ENGINEERING & TECHNOLOGY ELAMBALUR, PERAMBALUR-621220 DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING DESIGN OF ELECTRICAL MACHINES UNIT I INTRODUCTION 1. Define specific magnetic

More information

APEX DYNAMICS, INC. Staianless

APEX DYNAMICS, INC. Staianless APE DYNAMICS, INC. HIGH PRECISION HIGH SPEED PLANETARY GEARBOES AF / AFR Series Staianless High precision high speed planetary gearboxes AF / AFR series Apex Dynamics, Inc. is the world s most productive

More information

DATA SHEET WIEGAND WIRE SENSOR WS-UTS-4-U0, WS-UFS-4-U0

DATA SHEET WIEGAND WIRE SENSOR WS-UTS-4-U0, WS-UFS-4-U0 Wiegand Wire Sensor for energy harvesting multiturn encoders using the Wiegand effect to generate energy from a rotating magnetic field 1 Optimized for operation with the multiturn counter module ic-pmx

More information

Chapter 5 Three phase induction machine (1) Shengnan Li

Chapter 5 Three phase induction machine (1) Shengnan Li Chapter 5 Three phase induction machine (1) Shengnan Li Main content Structure of three phase induction motor Operating principle of three phase induction motor Rotating magnetic field Graphical representation

More information

Massachusetts Institute of Technology Department of Electrical Engineering and Computer Science Electric Machines

Massachusetts Institute of Technology Department of Electrical Engineering and Computer Science Electric Machines Massachusetts Institute of Technology Department of Electrical Engineering and Computer Science 6.685 Electric Machines Problem Set 10 Issued November 11, 2013 Due November 20, 2013 Problem 1: Permanent

More information

Definition Application of electrical machines Electromagnetism: review Analogies between electric and magnetic circuits Faraday s Law Electromagnetic

Definition Application of electrical machines Electromagnetism: review Analogies between electric and magnetic circuits Faraday s Law Electromagnetic Definition Application of electrical machines Electromagnetism: review Analogies between electric and magnetic circuits Faraday s Law Electromagnetic Force Motor action Generator action Types and parts

More information

UNI EN ISO 9001:2008 UNI EN ISO 14001:2004 BS OHSAS 18001:2007 EC DIRECTIVE 2014/34/EU (ATEX) CERTIFIED MANAGEMENT SYSTEM

UNI EN ISO 9001:2008 UNI EN ISO 14001:2004 BS OHSAS 18001:2007 EC DIRECTIVE 2014/34/EU (ATEX) CERTIFIED MANAGEMENT SYSTEM EN ISM-BSM CERTIFIED Technology Made in Italy Since 1955 the Varvel Group has been making speed reducers and variators for light industry applications. Reliable partner in power transmission equipment

More information

Mathematical MATLAB Model and Performance Analysis of Asynchronous Machine

Mathematical MATLAB Model and Performance Analysis of Asynchronous Machine Mathematical MATLAB Model and Performance Analysis of Asynchronous Machine Bikram Dutta 1, Suman Ghosh 2 Assistant Professor, Dept. of EE, Guru Nanak Institute of Technology, Kolkata, West Bengal, India

More information

International Journal of Advance Engineering and Research Development SIMULATION OF FIELD ORIENTED CONTROL OF PERMANENT MAGNET SYNCHRONOUS MOTOR

International Journal of Advance Engineering and Research Development SIMULATION OF FIELD ORIENTED CONTROL OF PERMANENT MAGNET SYNCHRONOUS MOTOR Scientific Journal of Impact Factor(SJIF): 3.134 e-issn(o): 2348-4470 p-issn(p): 2348-6406 International Journal of Advance Engineering and Research Development Volume 2,Issue 4, April -2015 SIMULATION

More information

Application basics of operation of three-phase induction motors

Application basics of operation of three-phase induction motors Application basics of operation of three-phase induction motors Design Duty Types Selection Dimensioning Motor Management TM Foreword This technical manual for Three-Phase Induction is the first publication

More information

Lecture (20) DC Machine Examples Start of Synchronous Machines

Lecture (20) DC Machine Examples Start of Synchronous Machines Lecture (20) DC Machine Examples Start of Synchronous Machines Energy Systems Research Laboratory, FIU All rights reserved. 20-1 Energy Systems Research Laboratory, FIU All rights reserved. 20-2 Ra R f

More information

TPH. 60Hz. Standard mode TPH 4T 2K. Code TPH 4T 2K S F A H

TPH. 60Hz. Standard mode TPH 4T 2K. Code TPH 4T 2K S F A H C US NSF/ANSI TPH Applications: The TPH Series are modernly designed with quiet and high efficient operation pumps, suitable for dependable water transfer, circulating or booster service. -Industrial circulation

More information

Encoders. Understanding. November design for industry: Help clean up the ocean. Horizon failure forensics

Encoders. Understanding. November design for industry: Help clean up the ocean. Horizon failure forensics November 2013 www.designworldonline.com INSIDE: design for industry: Help clean up the ocean Page 18 3D CAD: FEA aids Deepwater Horizon failure forensics Page 37 Understanding NETWORKING: Enhancing enterprise

More information

PESIT Bangalore South Campus Hosur road, 1km before Electronic City, Bengaluru -100 Department of Electronics & Communication Engineering

PESIT Bangalore South Campus Hosur road, 1km before Electronic City, Bengaluru -100 Department of Electronics & Communication Engineering QUESTION PAPER INTERNAL ASSESSMENT TEST 2 Date : /10/2016 Marks: 0 Subject & Code: BASIC ELECTRICAL ENGINEERING -15ELE15 Sec : F,G,H,I,J,K Name of faculty : Dhanashree Bhate, Hema B, Prashanth V Time :

More information

BASE. Rotary limit switch. OptiOnS. FEAtuRES. CERtiFiCAtiOnS

BASE. Rotary limit switch. OptiOnS. FEAtuRES. CERtiFiCAtiOnS Rotary limit switch BASE Rotary limit switch used to control and measure the movement of industrial machines. Its compact size make it suitable for use in narrow spaces. FEAtuRES It consists of a gear

More information

TRANSIENT ANALYSIS OF SELF-EXCITED INDUCTION GENERATOR UNDER BALANCED AND UNBALANCED OPERATING CONDITIONS

TRANSIENT ANALYSIS OF SELF-EXCITED INDUCTION GENERATOR UNDER BALANCED AND UNBALANCED OPERATING CONDITIONS TRANSIENT ANALYSIS OF SELF-EXCITED INDUCTION GENERATOR UNDER BALANCED AND UNBALANCED OPERATING CONDITIONS G. HARI BABU Assistant Professor Department of EEE Gitam(Deemed to be University), Visakhapatnam

More information

5SJ4...-.HG Circuit Breakers to IEC and UL 489

5SJ4...-.HG Circuit Breakers to IEC and UL 489 Siemens AG 009 5SJ...-.HG Circuit Breakers to IEC and UL 89 BETA Low-Voltage Circuit Protection Compliance with industry standards is a must in today's manufacturing environment. Worldwide acceptance is

More information

Jerad P. 10/1/2015. Motor Thermal Limits on Torque Production (Frameless Motor Level)

Jerad P. 10/1/2015. Motor Thermal Limits on Torque Production (Frameless Motor Level) Jerad P. 10/1/015 Motor Thermal Limits on Torque Production (Frameless Motor Level) Jerad P. 10/1/015 The theory of operation of a frameless permanent magnet motor (PMM) and its thermal limitations is

More information

0T 0TS S T TS T TS T TS 0T T T T T T 6T T TS 6T 6TS T TS 6T 6TS 6T 6TS 6T 6TS Frame.. 6. 6 6... 6.... B 6 6... A..... 0..0... 6.... 6.....06 6.66.. 6.0.....6 0... C 6..0 6. 6....... E.. D....... F 6............

More information

Polyflex JB and Micro-V Belt Drive Selection Procedures

Polyflex JB and Micro-V Belt Drive Selection Procedures Polyflex JB and Micro-V Belt Drive Selection Procedures How to Design Polyflex JB and Micro-V Belt Drives Note: The upcoming drive selection and engineering sections provide information for Polyflex JB

More information

Electromagnetic fields calculation at single phase shaded pole motor

Electromagnetic fields calculation at single phase shaded pole motor Electromagnetic fields calculation at single phase shaded pole motor Vasilija J. Šarac, Dobri M. Čundev Finite Element Method (FEM) is used for calculation of electromagnetic field inside the single phase

More information

EFFECTS OF LOAD AND SPEED VARIATIONS IN A MODIFIED CLOSED LOOP V/F INDUCTION MOTOR DRIVE

EFFECTS OF LOAD AND SPEED VARIATIONS IN A MODIFIED CLOSED LOOP V/F INDUCTION MOTOR DRIVE Nigerian Journal of Technology (NIJOTECH) Vol. 31, No. 3, November, 2012, pp. 365 369. Copyright 2012 Faculty of Engineering, University of Nigeria. ISSN 1115-8443 EFFECTS OF LOAD AND SPEED VARIATIONS

More information

TEMPERATURE EFFECTS ON MOTOR PERFORMANCE

TEMPERATURE EFFECTS ON MOTOR PERFORMANCE TEMPERATURE EFFECTS ON MOTOR PERFORMANCE Authored By: Dan Montone Haydon Kerk Motion Solutions / Pittman Motors hen applying DC motors to any type of application, temperature effects need to be considered

More information

University of Jordan Faculty of Engineering & Technology Electric Power Engineering Department

University of Jordan Faculty of Engineering & Technology Electric Power Engineering Department University of Jordan Faculty of Engineering & Technology Electric Power Engineering Department EE471: Electrical Machines-II Tutorial # 2: 3-ph Induction Motor/Generator Question #1 A 100 hp, 60-Hz, three-phase

More information

Control of Wind Turbine Generators. James Cale Guest Lecturer EE 566, Fall Semester 2014 Colorado State University

Control of Wind Turbine Generators. James Cale Guest Lecturer EE 566, Fall Semester 2014 Colorado State University Control of Wind Turbine Generators James Cale Guest Lecturer EE 566, Fall Semester 2014 Colorado State University Review from Day 1 Review Last time, we started with basic concepts from physics such as

More information

A Status Review OF IPM MOTOR DRIVES FOR ELECTRIC SUBMERSIBLE PUMP IN HARSH COLD OCEANS

A Status Review OF IPM MOTOR DRIVES FOR ELECTRIC SUBMERSIBLE PUMP IN HARSH COLD OCEANS 1 A Status Review OF IPM MOTOR DRIVES FOR ELECTRIC SUBMERSIBLE PUMP IN HARSH COLD OCEANS M. A. Rahman Memorial University of Newfoundland St. John s, NL, Canada, A1B 3X5 arahman@mun.ca 2 PES 2015 3 Outlines

More information

DRUM MOTOR DM 0080 DRUM MOTOR DM Technical data. Design variants and accessories

DRUM MOTOR DM 0080 DRUM MOTOR DM Technical data. Design variants and accessories Practice-iented, scalable and thought out in detail: The new drum mot makes it easy to ild a completely indidual convey system and is dimensioned f the higher requirements f permissible belt tension from

More information

Dynamic Behavior of Three phase Inductions Motors as Loads in an Electric Power System with Distributed Generation, a Case of Study.

Dynamic Behavior of Three phase Inductions Motors as Loads in an Electric Power System with Distributed Generation, a Case of Study. Dynamic Behavior of Three phase Inductions Motors as Loads in an Electric Power System with Distributed Generation, a Case of Study. Marcelo Rodrigo García Saquicela, Ernesto Ruppert Filho, José Luis Azcue

More information

GRUNDFOS DATA BOOKLET MAGNA, UPE. Series 2000 circulator pumps

GRUNDFOS DATA BOOKLET MAGNA, UPE. Series 2000 circulator pumps GRUNDFOS DATA BOOKLET MAGNA, UPE Series circulator pumps Contents Product data MAGNA/UPE 3 Duty range 3 Characteristic features 3 Benefits 3 Applications 3 eating systems 3 Pumped liquids 3 Type key Performance

More information

Accurate Joule Loss Estimation for Rotating Machines: An Engineering Approach

Accurate Joule Loss Estimation for Rotating Machines: An Engineering Approach Accurate Joule Loss Estimation for Rotating Machines: An Engineering Approach Adeeb Ahmed Department of Electrical and Computer Engineering North Carolina State University Raleigh, NC, USA aahmed4@ncsu.edu

More information

IE3. General Purpose 3-phase Induction Motors. Energy Efficient Motors series 3VTB. Product Catalogue

IE3. General Purpose 3-phase Induction Motors. Energy Efficient Motors series 3VTB. Product Catalogue General urpose phase Induction otors Comply with the new efficiency classes for lowvoltage threephase motors IC 000 standard and U Regulation 0/00, /0 nergy fficient otors series V roduct Catalogue General

More information

An Introduction to Electrical Machines. P. Di Barba, University of Pavia, Italy

An Introduction to Electrical Machines. P. Di Barba, University of Pavia, Italy An Introduction to Electrical Machines P. Di Barba, University of Pavia, Italy Academic year 0-0 Contents Transformer. An overview of the device. Principle of operation of a single-phase transformer 3.

More information

Electrical Machines and Energy Systems: Operating Principles (Part 1) SYED A Rizvi

Electrical Machines and Energy Systems: Operating Principles (Part 1) SYED A Rizvi Electrical Machines and Energy Systems: Operating Principles (Part 1) SYED A Rizvi AC Machines Operating Principles: Rotating Magnetic Field The key to the functioning of AC machines is the rotating magnetic

More information

maintenance-free in continuous duty low-noise space-saving extremely tough Suction capacity in m 3 /h m 3 /h 2500 Suction capacity 30,000 10,000

maintenance-free in continuous duty low-noise space-saving extremely tough Suction capacity in m 3 /h m 3 /h 2500 Suction capacity 30,000 10,000 Suction capacity in m /h m /h 20 2000 1000 0 00 2 200 1 100 10 700 0 0 400 00 200 100 0 100 200 00 400 0 0 700 800 900 1000 1100 Suction pressure auge pressure mbar ELMO- vacuum pumps and compressors convey

More information

ROTANTA 460/460 R Benchtop, Underbench and Floorstanding Centrifuges classic/cooled

ROTANTA 460/460 R Benchtop, Underbench and Floorstanding Centrifuges classic/cooled Benchtop, Underbench and Floorstanding Centrifuges classic/cooled PERFORMANCE Efficient, results-oriented working processes are top priority in both research and routine laboratories. Advanced laboratory

More information

R13 SET Derive the expression for the maximum bending stress developed in the leaf spring and also the central deflection of a leaf spring.

R13 SET Derive the expression for the maximum bending stress developed in the leaf spring and also the central deflection of a leaf spring. Code No: RT22013 R13 SET - 41 STRENGTH OF MATERIALS - II (Civil Engineering) Time: 3 hours Max. Marks: 70 Note: 1. Question Paper consists of two parts (Part-A and Part-B) 2. Answer ALL the question in

More information

Mutual Inductance. The field lines flow from a + charge to a - change

Mutual Inductance. The field lines flow from a + charge to a - change Capacitors Mutual Inductance Since electrical charges do exist, electric field lines have a starting point and an ending point. For example, if you have a + and a - change, the field lines would look something

More information

Post-Test. For more information, please contact the MCU Training Team.

Post-Test. For more information, please contact the MCU Training Team. Answer the following application questions based on this diagram. Multiple Choice 1. What type of application curve must be used inside a VFD to operate this carpet roll correctly? A) Constant Torque B)

More information

Electric Machines I Three Phase Induction Motor. Dr. Firas Obeidat

Electric Machines I Three Phase Induction Motor. Dr. Firas Obeidat Electric Machines I Three Phase Induction Motor Dr. Firas Obeidat 1 Table of contents 1 General Principles 2 Construction 3 Production of Rotating Field 4 Why Does the Rotor Rotate 5 The Slip and Rotor

More information

A Comparative Analysis of Three Phase Induction Motor Performance Evaluation

A Comparative Analysis of Three Phase Induction Motor Performance Evaluation RESEARCH ARTICLE International Journal of Engineering and Techniques - Volume 2 Issue 3, May June 216 OPEN ACCESS A Comparative Analysis of Three Phase Induction Motor Performance Evaluation 1 France O.

More information

PARTS MANUAL 2 INCH CHIPPER/SHREDDER. SC cc SUBARU

PARTS MANUAL 2 INCH CHIPPER/SHREDDER.   SC cc SUBARU www.bearcatproducts.com 2 INCH CHIPPER/SHREDDER SC2170 170cc SUBARU PARTS MANUAL PN: 1641-00 Rev. 0011 Companion to 1509-00 Range: D01688 - Current Before You Begin DEAR ECHO BEAR CAT CUSTOMER Thank you

More information

TETRA COMPACT. PreliminarY

TETRA COMPACT. PreliminarY TETRA COMPACT PreliminarY TETRA COMPACT HOW TO ORDER A BRUSHLESS SERVOMOTOR TETRA COMPACT 40 SR 0.16 E 01 001 A 00.02 TETRA COMPACT TYPE WAVEFORM RATED STALL TORQUE TETRA COMPACT 40 60 80 SR = sinusoidal

More information

A Novel Three-phase Matrix Converter Based Induction Motor Drive Using Power Factor Control

A Novel Three-phase Matrix Converter Based Induction Motor Drive Using Power Factor Control Australian Journal of Basic and Applied Sciences, 8(4) Special 214, Pages: 49-417 AENSI Journals Australian Journal of Basic and Applied Sciences ISSN:1991-8178 Journal home page: www.ajbasweb.com A Novel

More information

System Components. Electric Motors.

System Components. Electric Motors. System Components Electric Motors www.powerjacks.com Contents.1. Electric Motors.1.1. AC Motors.1.. AC Motor Performance 0 rpm ( pole).1.. AC Motor Performance 00 rpm ( pole).1.. AC Motors with Integral

More information

General specification

General specification SC hree Phase IC ow Voltage Product Catalogue iti o n hree phase sychronous rd d SC Series Motors nhanced performance cast iron units eneral specification Introduction Specification SC motors are suitable

More information

Investigation of fan vibration

Investigation of fan vibration Investigation of fan vibration Jacques Muiyser 1, Frank Weissbuch 2, Trung Luu 3, Pascal Malpoix 3 and Hanno Reuter 1,3 1 Department of Mechanical and Mechatronic Engineering, Stellenbosch University 2

More information

SPECIFICATION SS 51/9 400KV COUPLING CAPACITORS FOR POWER LINE CARRIER SYSTEM

SPECIFICATION SS 51/9 400KV COUPLING CAPACITORS FOR POWER LINE CARRIER SYSTEM INDEPENDENT POWER TRANSMISSION OPERATOR S.A. TNPRD/ SUBSTATION SPECIFICATION & EQUIPMENT SECTION January 2017 SPECIFICATION SS 51/9 400KV COUPLING CAPACITORS FOR POWER LINE CARRIER SYSTEM I. SCOPE This

More information

ECE 325 Electric Energy System Components 7- Synchronous Machines. Instructor: Kai Sun Fall 2015

ECE 325 Electric Energy System Components 7- Synchronous Machines. Instructor: Kai Sun Fall 2015 ECE 325 Electric Energy System Components 7- Synchronous Machines Instructor: Kai Sun Fall 2015 1 Content (Materials are from Chapters 16-17) Synchronous Generators Synchronous Motors 2 Synchronous Generators

More information

Design Optimization of Electric Motor Frame and Its Study for Thermal, Dynamic and Modal Stability

Design Optimization of Electric Motor Frame and Its Study for Thermal, Dynamic and Modal Stability Design Optimization of Electric Motor Frame and Its Study for Thermal, Dynamic and Modal Stability Pavankumar V Kulkarni 1, Dr. S. R. Basavaraddi 2 1Dept. of Mechanical Engineering, KLE Dr. M. S. S. College

More information

Contents. Identification LHC. Horizontal split case pumps. Type key. Identification Type key

Contents. Identification LHC. Horizontal split case pumps. Type key. Identification Type key Contents dentification Type key Product data ntroduction Applications Features and benefits Performance range pole pole pole Construction Sectional drawing Construction features Test pressure Operating

More information

Vector Controlled Power Generation in a Point Absorber Based Wave Energy Conversion System

Vector Controlled Power Generation in a Point Absorber Based Wave Energy Conversion System Vector Controlled Power Generation in a Point Absorber Based Wave Energy Conversion System Jisha Thomas Chandy 1 and Mr. Vishnu J 2 1,2 Electrical & Electronics Dept of Engineering, Sree Buddha College

More information

DRUM MOTOR DM 0080 DRUM MOTOR DM Technical data. Design variants and accessories

DRUM MOTOR DM 0080 DRUM MOTOR DM Technical data. Design variants and accessories Practice-iented, scalable and thought out in detail: The new drum mot makes it easy to ild a completely indidual convey system and is dimensioned f the higher requirements f permissible belt tension from

More information

Calculating an electromechanical torque of a squirrel cage motor based on an axial flux obtained by the FEM

Calculating an electromechanical torque of a squirrel cage motor based on an axial flux obtained by the FEM ITM Web of Conferences 5, 5 (7) CMES 7 DOI:.5/itmconf/755 Calculating an electromechanical torque of a squirrel cage motor based on an axial flux obtained by the FEM Janusz Petryna, Jarosław Tulicki, and

More information

3 d Calculate the product of the motor constant and the pole flux KΦ in this operating point. 2 e Calculate the torque.

3 d Calculate the product of the motor constant and the pole flux KΦ in this operating point. 2 e Calculate the torque. Exam Electrical Machines and Drives (ET4117) 11 November 011 from 14.00 to 17.00. This exam consists of 5 problems on 4 pages. Page 5 can be used to answer problem 4 question b. The number before a question

More information

K04 TYPE -40 C +85 C 20000H

K04 TYPE -40 C +85 C 20000H K04 TYPE -40 C +85 C 20000H Extended life. Surge-proof capacitor in aluminium can with insulation sleeve. To be mounted with ring clips or with threaded stud. Designed for high resistances to voltage spikes.

More information

Parameter Design of High Speed Coupling for 6 MW Wind Turbine Considering Torsional Vibration

Parameter Design of High Speed Coupling for 6 MW Wind Turbine Considering Torsional Vibration Parameter Design of High Speed Coupling for 6 MW Wind Turbine Considering Torsional Vibration JongHun Kang 1, Junwoo Bae 2, Seungkeun Jeong 3, SooKeun Park 4 and Hyoung Woo Lee 1 # 1 Department of Mechatronics

More information

Chapter 3: Fundamentals of Mechanics and Heat. 1/11/00 Electromechanical Dynamics 1

Chapter 3: Fundamentals of Mechanics and Heat. 1/11/00 Electromechanical Dynamics 1 Chapter 3: Fundamentals of Mechanics and Heat 1/11/00 Electromechanical Dynamics 1 Force Linear acceleration of an object is proportional to the applied force: F = m a x(t) F = force acting on an object

More information

ELMO-G Vacuum Pumps/Compressors, Range 2BH1, Three-Phase 50 Hz

ELMO-G Vacuum Pumps/Compressors, Range 2BH1, Three-Phase 50 Hz ELMO- Vacuum Pumps/Compressors, Range 2BH1, Three-Phase 50 Hz Selection diagram vacuum operation Selection diagram compressor operation The performance curves are valid for pumping air at 15 C at the inlet

More information

SVH with HYDROVAR (HVL range)

SVH with HYDROVAR (HVL range) SVH with HYDROVAR (HVL range) SVH-HVL Rev. B Ed.9/1 (EN) SVH SERIES (e-sv WITH HYDROVAR) Background and context For all pumping needs in commercial or residential building and in industry applications,

More information

YUNSHENG PERMANENT MAGNET SYNCHRONOUS MOTOR. YUNSHENG GROUP Ningbo YunSheng Co.,Ltd. Servo Control Division

YUNSHENG PERMANENT MAGNET SYNCHRONOUS MOTOR. YUNSHENG GROUP Ningbo YunSheng Co.,Ltd. Servo Control Division YUNSHNG PRMANNT MAGNT SYNCHRONOUS MOTOR YUNSHNG GROUP Ningbo YunSheng Co.,Ltd. Servo Control Division Add:No. 1 Yangfan Road, National Hi-Tech Zone,Ningbo, China Tel:0-21 26 261 Fax:0-269 mail:ys-sem@ysweb.com

More information

Overload Relays. SIRIUS 3RU1 Thermal Overload Relays. 3RU11 for standard applications. 5/46 Siemens LV 1 AO 2011

Overload Relays. SIRIUS 3RU1 Thermal Overload Relays. 3RU11 for standard applications. 5/46 Siemens LV 1 AO 2011 SIRIUS 3RU1 Thermal Overview 1 2 7 3 4 6 "Increased safety" type of EEx e according to ATEX directive 94/9/EC The 3RU11 thermal overload relays are suitable for the overload of explosion-proof motors with

More information

PiB Series. PiB (Pump-in-a-Box) 4380 & 4392 Series

PiB Series. PiB (Pump-in-a-Box) 4380 & 4392 Series PiB Series PiB (Pump-in-a-Box) & 9 Series FILE NO: - DATE: July SUPERSEDES: - DATE: January 09 PiB Series Guaranteed In Stock At The Right Price! The PiB series builds on the high quality and unsurpassed

More information

Transient Analysis of Three Phase Squirrel Cage Induction Machine using Matlab

Transient Analysis of Three Phase Squirrel Cage Induction Machine using Matlab Transient Analysis of Three Phase Squirrel Cage Induction Machine using Matlab Mukesh Kumar Arya*, Dr.Sulochana Wadhwani** *( Department of Electrical Engineering, Madhav Institute of Technology & Science,

More information