NON-NEWTONIAN FLUIDS. What are they? AND POLYMERS
|
|
- Aldous Gilmore
- 6 years ago
- Views:
Transcription
1 NON-NEWTONIAN FLUIDS What are they? AND POLYMERS
2 VOCABULARY Non-Newtonian Dilatant rigid Thixotropic does NOT follow the laws of physics as described by Newton adding energy (shear force) makes a liquid thicker or more more viscous examples oobleck (cornstarch-water mixture), liquid body armor adding energy (shear force) makes a solid thinner or liquefy less viscous Viscosity examples catsup, concrete, some paint, printer s ink resistance or opposition to flow of a liquid
3 NEWTONIAN AND NON-NEWTONIAN FLUIDS Fluids can be categorized as Newtonian and non- Newtonian. The viscosity of the Newtonian fluids remains constant at all shear rates at a constant temperature and pressure. But, for a non-newtonian fluid, the viscosity varies with the shear rate and time. The viscosity for fluid materials can be measured at different shear rates using a viscometer. Shearing is a motion of parallel surfaces sliding past each other.
4 GLOP / OOBLECK - DILATNAT Glop is made by adding cornstarch with water. Glop has many other names such as Oobleck, Gloop, etc.
5 OOBLECK / GLOP - DETAILS A correctly-made batch of Glop is a dilatant Non- Newtonian Fluid. Glop should move like a liquid when slowly stirred. It will be thick and viscous but still flow. When stirred quickly (more shear force applied), the mixture should lock up and behave like a solid. Upon sitting still, the mixture will return to its fluid state.
6 DINO SNOT / SLIME / GLORAX - DILATANT Dino Snot is a mixture of borax solution and glue. When Borax and glue are mixed, the Borax links with the glue (polymers) to create a slime It tends to be a little more viscous than glop, but just as much fun to play with! Also a dilatant non-newtonian fluid.
7 DINO SNOT / GLORAX - DETAILS Gloraz is also a dilatant non-newtonian fluid. You can bounce it, toss it around, break it. It will snap when ripped or bent quickly but if pulled gently it will stretch slowly and ooze.
8 QUICK SAND - THIXOTROPIC Quick sand is the opposite of dilatant. It is thixotropic. The more you move it around, the more liquid it becomes. Quicksand is basically just ordinary sand that has been so saturated with water that the friction between sand particles is reduced. The resulting sand is a mushy mixture of sand and water that can no longer support any weight.
9 SILLY PUTTY - THIXOTROPIC Silly putty is also a thixotropic non-newtonian fluid. As you move it, it becomes more fluid.
10 MORE THIXOTROPIC Ketchup, hair gel, some paint and toothpaste are good every day examples of thixotropic non-newtonian fluids. Each retains its shape until force is added and then it flows. Once force is removed, it hardens back to solid -like properties. Paint stays on the brush but can spread real thin on walls.
11 MORE THIXOTROPIC EXAMPLES A landslide is an example of a thixotropic event. Clay is very thixotropic. Thixotropy in the Human Body: Synovial fluid in joints and connective tissue each become more fluid when they are stirred up, and more solid when they sit without being disturbed. Website with videos:
12 HOW DO NON-NEWTONIAN FLUIDS WORK? The answer lies in POLYMERS.
13 POLYMERS A polymer is a large molecule in which the atoms are connected in repeating links. Each separate link is a monomer. "Mono" means one and "poly" means many. mer means part.
14 NAMING POLYMERS If the "units" called monomers in a polymer are all the same, then the polymer is called a "homopolymer". Homopolymers are named by adding the prefix poly- before the monomer name from which the polymer is made. For example, a polymer made by bonding styrene monomer molecules together is called polystyrene.
15 POLYMERS Polymers come naturally, such as in protein molecules, or can be synthetic, as in rubber, plastic, white glue, money, or a polyester fabric. There are 4 main types of synthetic polymers: thermoplastics thermosets elastomers synthetic fibers
16 DILATANT: WHAT IS HAPPENING? Cornstarch is a polymer. Water and cornstarch do not mix real well. The starch doesn t fully dissolve; it is more of a suspension. The starch molecule rolls up from both ends and becomes somewhat of a spherical shape that might resemble BB s. When slowly stirred, the starch balls roll around each other and the mixture has fluid properties.
17 DILATANT: WHAT IS HAPPENING? When a larger amount of shear force is applied, the molecule uncurls and becomes more linear. These long molecules then entangle and the mixture becomes rigid like a solid. When the shear force is removed, the molecules move more freely and roll back up into balls which allows the mixture to flow like a liquid again.
18 THIXOTROPIC WHAT IS HAPPENING?
19 THIXOTROPIC WHAT IS HAPPENING? Thixotropic materials are non-newtonian fluids which are gellike at rest, but tend to flow when agitated or stressed. The particles of this type of product are held together by weak forces at low shear rates, whereas at high shear rates the particles tend to separate. The shear force causes a disruption in the molecular structure, weakening it and making it more fluid. Sometime the structure is able to return to it s original state instantly (like gel or catsup) and these are called pseudoplastic fluids. Other times it stays more fluid (like yogurt, and ice cream).
20 The end
What Do You Think? Investigate GOALS
Activity 7 Polymers GOALS In this activity you will: Make a polymer-based material that has properties different from other states of matter that you have studied. Observe the material s properties and
More informationNon-Newtonian Fluids How slow can you go?
Non-Newtonian Fluids How slow can you go? Background Have you heard of Sir Isaac Newton? Newton (1643-1727) is a famous scientist and mathematician who discovered gravity! In addition, he created the three
More informationRheology The relationship between rheological response and material structure
Rheology The relationship between rheological response and material structure Márta Berka University of Debrecen Dept of Colloid and Environmental Chemistry http://dragon.unideb.hu/~kolloid/ Introduction
More informationFluids: How thick are liquids?
Fluids: How thick are liquids? Student Advanced Version Introduction: Fluids are substances that can flow under an applied force. What are some examples of fluids? We often think of fluids as substances
More informationWHAT EXACTLY IS SLIME???
SLIME Pre-Lab - Read the following passages below out loud with your partner. After you are done reading answer the questions that follow in complete sentences. WHAT EXACTLY IS SLIME??? The mixture of
More informationChapter 3 Non-Newtonian fluid
Chapter 3 Non-Newtonian fluid 3-1. Introduction: The study of the deformation of flowing fluids is called rheology; the rheological behavior of various fluids is sketchen Figure 3-1. Newtonian fluids,
More informationOobleck: A Program about States of Matter Presented by the Sciencenter in Ithaca, NY. Program Overview
Oobleck: A Program about States of Matter Presented by the Sciencenter in Ithaca, NY Program Overview Oobleck introduces students to states of matter and scientific observation. The program is designed
More informationLecture 7: Rheology and milli microfluidic
1 and milli microfluidic Introduction In this chapter, we come back to the notion of viscosity, introduced in its simplest form in the chapter 2. We saw that the deformation of a Newtonian fluid under
More informationAPPENDIX A USEFUL EQUATIONS (METRIC AND IMPERIAL SYSTEMS) THE DEFINITION OF VISCOSITY RHEOLOGICAL (VISCOUS BEHAVIOR) PROPERTIES OF FLUIDS
APPENDIX A USEFUL EQUATIONS (METRIC AND IMPERIAL SYSTEMS) THE DEFINITION OF VISCOSITY RHEOLOGICAL (VISCOUS BEHAVIOR) PROPERTIES OF FLUIDS A APPENDIX A APPENDIX A Flow vs. velocity Specific gravity vs.
More informationThermoplastic. Condensation. Homopolymer. Polymer POLYMERS. Synthetic. Natural. Addition. Copolymer. Polymer. Thermosetting
Thermoplastic Homopolymer Condensation Polymer Natural POLYMERS Synthetic Addition Polymer Copolymer Thermosetting Polymers are very large covalent molecular substances containing tens of thousands of
More informationThis chapter is a study of the shear stress as a function of the shear rate for Newtonian and non-newtonian biological materials.
Lecture 10 and Flow (Ch. 6) This chapter is a study of the shear stress as a function of the shear rate for Newtonian and non-newtonian biological materials. 1 Lecture 10 and Flow (Ch. 6) When a fluid
More informationSave time by mixing the two solutions below in advance of the activity. You could do this with the participants if you have plenty of time.
CREEPY PUTTY Grades 3 5, 6 8 30 45 minutes DESIGN CHALLENGE Experiment with the properties of materials as you manipulate a Silly Putty-like material to have different degrees of viscoelasticity. Create
More informationPharmaceutics I. Unit 6 Rheology of suspensions
Pharmaceutics I اينالديصيدلينيات 1 Unit 6 Rheology of suspensions 1 Rheology, the science of the flow or deformation of matter (liquid or soft solid) under the effect of an applied force. It addresses
More informationObjective Students will gain an understanding of how the properties of a solid material can affect how it interacts with water.
OOBLECK! (1 Hour) Addresses NGSS Level of Difficulty: 4 Grade Range: K-2 OVERVIEW Students will examine the behavior of different types of solids when they are dissolved in water and explain those behaviors
More informationThe Curious Case of Soft Matter Ranjini Bandyopadhyay Raman Research Institute
The Curious Case of Soft Matter Ranjini Bandyopadhyay Raman Research Institute ranjini@rri.res.in. My research interests: structure, dynamics, phase behavior and flow of soft materials Panta rei: everything
More informationMATERIALS SCIENCE POLYMERS
POLYMERS 1) Types of Polymer (a) Plastic Possibly the largest number of different polymeric materials come under the plastic classification. Polyethylene, polypropylene, polyvinyl chloride, polystyrene,
More informationPharmaceutics I صيدالنيات 1. Unit 6
Pharmaceutics I صيدالنيات 1 Unit 6 1 Rheology of suspensions Rheology, the study of flow, addresses the viscosity characteristics of powders, fluids, and semisolids. Materials are divided into two general
More informationPharmaceutical compounding I Colloidal and Surface-Chemical Aspects of Dosage Forms Dr. rer. nat. Rebaz H. Ali
University of Sulaimani School of Pharmacy Dept. of Pharmaceutics Pharmaceutical Compounding Pharmaceutical compounding I Colloidal and Surface-Chemical Aspects of Dosage Forms Dr. rer. nat. Rebaz H. Ali
More informationRheological Properties
Rheological Properties Shear Stress the force experienced by the liquid is proportional to the area of the upper plate and is defined as the shear stress, σ = F/A (Units = Nm -2 or Pascals [Pa]) Shear
More informationWe may have a general idea that a solid is hard and a fluid is soft. This is not satisfactory from
Chapter 1. Introduction 1.1 Some Characteristics of Fluids We may have a general idea that a solid is hard and a fluid is soft. This is not satisfactory from scientific or engineering point of view. In
More informationDynamic (absolute) Viscosity
Viscosity Taken from: http://www.engineeringtoolbox.com/dynamic-absolute-kinematic-viscosity-d_412.html The viscosity of a fluid is an important property in the analysis of liquid behavior and fluid motion
More informationLecture No. (1) Introduction of Polymers
Lecture No. (1) Introduction of Polymers Polymer Structure Polymers are found in nature as proteins, cellulose, silk or synthesized like polyethylene, polystyrene and nylon. Some natural polymers can also
More informationContents. Preface XIII. 1 General Introduction 1 References 6
VII Contents Preface XIII 1 General Introduction 1 References 6 2 Interparticle Interactions and Their Combination 7 2.1 Hard-Sphere Interaction 7 2.2 Soft or Electrostatic Interaction 7 2.3 Steric Interaction
More information2. Amorphous or Crystalline Structurally, polymers in the solid state may be amorphous or crystalline. When polymers are cooled from the molten state
2. Amorphous or Crystalline Structurally, polymers in the solid state may be amorphous or crystalline. When polymers are cooled from the molten state or concentrated from the solution, molecules are often
More informationIntroduction to Geology Spring 2008
MIT OpenCourseWare http://ocw.mit.edu 12.001 Introduction to Geology Spring 2008 For information about citing these materials or our Terms of Use, visit: http://ocw.mit.edu/terms. RHEOLOGICAL MODELS Rheology
More informationThixotropy- a review by Howard A. Barnes
Thixotropy- a review by Howard A. Barnes Giorgia Bettin Hatsopoulos Microfluids Laboratory Department of Mechanical Engineering Massachusetts Institute of Technology http://web.mit.edu/nnf Introduction
More informationIntroduction to Viscometry and Rheology, Basics, Rotational Testing. Basic Seminar Applied Rheology
Introduction to Viscometry and Rheology, Basics, Rotational Testing Basic Seminar Applied Rheology Contents Definition of basic rheological parameters Viscosity and elasticity Deformation, shear stress
More informationQuiz 1. Introduction to Polymers
100406 Quiz 1. Introduction to Polymers 1) Polymers are different than low-molecular weight oligomers. For example an oligomeric polyethylene is wax, oligomeric polystyrene is similar to naphthalene (moth
More informationThe principals of rheology In pharmaceutical technology
The principals of rheology In pharmaceutical technology Dr. Aleksandar Széchenyi University of Pécs Gyógyszertechnológiai és Biofarmáciai Intézet Institute of Pharmaceutical Technology and Biopharmacy
More informationArticle for the 29 th Sensing Forum
Article for the 29 th Sensing Forum Characteristics of Tuning-fork Vibration Rheometer RHEO-VISCO RV-10000 Presented by: Naoto Izumo, Yuji Fukami, and Masahiro Kanno R&D Division 5, A&D Company, Limited
More informationMatter MATTER & ENERGY MATTER: THE STUFF OF THE UNIVERSE. Atoms. Pure Substance
Matter MATTER & ENERGY MATTER: THE STUFF OF THE UNIVERSE Matter: anything that takes up space and has mass Mass: the amount of stuff in an object Weight: gravity s pull on mass on Earth, this is the same
More informationMATTER & ENERGY MATTER: THE STUFF OF THE UNIVERSE
MATTER & ENERGY MATTER: THE STUFF OF THE UNIVERSE Matter Matter: anything that takes up space and has mass Mass: the amount of stuff in an object Weight: gravity s pull on mass on Earth, this is the same
More informationPolymerization. Objectives: Vocabulary: Materials: Students will: Safety:
Author: Carla Brathwaite Date Created: August 5, 2008 Subject: Chemistry Level: High school Standards: New York State www.emsc.nysed.gov/ciai/ Standard 1 Analysis = inquiry and design Standard 4 The physical
More informationMECHANICAL PROPERTIES
MECHANICAL PROPERTIES Rheology S.C. BAYNE, 1 J.Y. Thompson 2 1 University of Michigan School of Dentistry, Ann Arbor, MI 48109-1078 sbayne@umich.edu 2 Nova Southeastern College of Dental Medicine, Ft.
More informationThickeners + Rheology Guide
Thickeners + Rheology Guide 2 Thickeners + Rheology Guide 3 Rheology Rheology is defined as the study of the deformation and flow of materials. When a force is applied to a liquid, the liquid will flow
More informationViscoelasticity. Basic Notions & Examples. Formalism for Linear Viscoelasticity. Simple Models & Mechanical Analogies. Non-linear behavior
Viscoelasticity Basic Notions & Examples Formalism for Linear Viscoelasticity Simple Models & Mechanical Analogies Non-linear behavior Viscoelastic Behavior Generic Viscoelasticity: exhibition of both
More informationFundamentals of Rheology Science of Deformation and Flow Homer Jamasbi, Ph.D. Elementis Specialties
Fundamentals of Rheology Science of Deformation and Flow Homer Jamasbi, Ph.D. Elementis Specialties Introduction Rheology is the study of how materials deform and flow under the influence of external forces.
More informationPOLYMER SCIENCE : lecture 1. Dr. Hanaa J. Alshimary Second class Poly. Eng. Dep. Introduction of Polymers Polymer poly mer Monomer Polymerization
Introduction of Polymers Polymer - The word polymer is the Greek word : poly means many and mer means unit or parts, A Polymer is a large molecule that comprises repeating structural units joined by the
More informationBalanced forces do not cause an object to change its motion Moving objects will keep moving and stationary objects will stay stationary
Newton s Laws Test 8.PS2.3) Create a demonstration of an object in motion and describe the position, force, and direction of the object. 8.PS2.4) Plan and conduct an investigation to provide evidence that
More informationLesson 1 Matter and Its Properties
Lesson 1 Student Labs and Activities Page Launch Lab 8 Content Vocabulary 9 Lesson Outline 10 MiniLab 12 Content Practice A 13 Content Practice B 14 Math Skills 15 School to Home 16 Key Concept Builders
More informationAn Overview of Non-Newtonian Fluid
International Journal of Applied Science and Engineering 4(2): December, 2016: pp. 97-101 DOI: 10.5958/2322-0465.2016.00011.3 2016 New Delhi Publishers. All rights reserved An Overview of Non-Newtonian
More informationVirtual Library Lesson: Oobleck, Gloop, and Glurch
Oobleck, Gloop, and Glurch Lesson Overview Throughout this lesson, students will use inquiry skills to identify states of matter, describe physical properties, and modify the recipe to change physical
More informationScience 8 Chapter 7 Section 1
Science 8 Chapter 7 Section 1 Describing Fluids (pp. 268-277) What is a fluid? Fluid: any thing that flows; a liquid or a gas While it would seem that some solids flow (sugar, salt, etc), they are not
More informationRHEOLOGICAL ANALYSIS FOR DEVELOPMENT AND QUALITY ASSURANCE OF PRESSURE SENSITIVE ADHESIVES
RHEOLOGICAL ANALYSIS FOR DEVELOPMENT AND QUALITY ASSURANCE OF PRESSURE SENSITIVE ADHESIVES Roland H. Horst, Ph.D., Analytical Scientist, Berry Plastics, Franklin, KY Summary Specifications of pressure
More informationThickeners/Rheology Guide
Thickeners/Rheology Guide Rheology Rheology is defined as the study of the deformation and flow of materials. When a force is applied to a liquid, the liquid will flow to relieve the strain from this force.
More informationChapter 6 Pneumatic Transport
Chapter 6 Pneumatic Transport 6.1 Pneumatic Transport Use of a gas to transport a particulate solid through pipeline Powder Rotary valve Blower Three major variables for pneumatic conveying - solid mass
More informationStates of Matter: A Solid Lesson where Liquids Can be a Gas!
TEACHER GUIDE STATES OF MATTER 60 Minute Physical Science Lesson Science- to- Go! Program Grades: 1-3 States of Matter: A Solid Lesson where Liquids Can be a Gas! Description Your classroom will be converted
More information1/7. 4-1) Introduction
1/7 Measurement Technology Monthly Periodical Article for the February 2013 issue Classification Products and technology 1) Title Vibration Rheometer RV-10000 2) Subtitle Viscosity of various liquids measured
More information(Refer Slide Time: 00:58)
Nature and Properties of Materials Professor Bishak Bhattacharya Department of Mechanical Engineering Indian Institute of Technology Kanpur Lecture 18 Effect and Glass Transition Temperature In the last
More informationYield Stress Fluids, Meeting #8
Yield Stress Fluids, Meeting #8 Goldin, Pfeffer and Shinnar. (1972). Break-up of a Capillary Jet of a Non-Newtonian Fluid having a Yield Stress. Thomas J. Ober August 24, 2009 Part of the summer 2009 Reading
More informationLecture 3. Properties of Fluids 11/01/2017. There are thermodynamic properties of fluids like:
11/01/2017 Lecture 3 Properties of Fluids There are thermodynamic properties of fluids like: Pressure, p (N/m 2 ) or [ML -1 T -2 ], Density, ρ (kg/m 3 ) or [ML -3 ], Specific weight, γ = ρg (N/m 3 ) or
More informationThe Physics of Non-Newtonian Fluids
The Physics of Non-Newtonian Fluids M. Grogan 10. April 2006 [1][4] R. Fox, A. McDonald, P. Pritchard, Introduction to Fluid Mechanics, 6 th Ed. 2004 Wiley, United States of America. p3, p27. [2],[3] B
More informationMiSP Weathering and Erosion Worksheet #1 L1
MiSP Weathering and Erosion Worksheet #1 L1 Weathering and Erosion Worksheet#1L1 Name Date L 1, 2, 3 MASS WASTING - GLACIAL CREEPING Advance Preparation Making Glacial Ooze Recipe for each lab group: The
More informationSample file. *Learn Basic Information About Polymers *Make a Polymer Ball *Make Slime *Make Floam
S C I E N C E C H E M I S T R Y This Enrichment4You e-guide provides a brief overview of polymers with an emphasis on playful or toy based polymers. In this e-guide you will: PLAYFUL POLYMERS *Learn Basic
More informationGuideline for Rheological Measurements
Guideline for Rheological Measurements Typical Measurements, Diagrams and Analyses in Rheology www.anton-paar.com General Information: = Measurement = Diagram = Analysis Important Rheological Variables:
More informationCastle Challenge Teacher Instructions (First Third Grade)
Castle Challenge Teacher Instructions (First Third Grade) The set of experiments explores the concept of surface tension. Students are asked to help Prince Charming save his princess from the castle by
More informationAuthor(s): Dr. Teresa A. Le Sage & Dr. Jane Fry, University of Houston-Victoria Modified by Sean Hillson & Mark Walsh
Instant Snow Author(s): Dr. Teresa A. Le Sage & Dr. Jane Fry, University of Houston-Victoria Modified by Sean Hillson & Mark Walsh Date Created: 2006/2014 Subject: Chemistry Grade Level: K-6 Standards:
More informationPredictions: I predicted that when we combine the Sodium Borate with the Poly Alcohol that a thick slime will be made and the volume will change.
Braden Monteyro Due:February 7, 2016 Polymers and Cross Linking Introduction: This lab was completed February 7, 2017. My lab partner was David. In Phase 1 of this lab we combined two reactants, Polyvinyl
More informationMP10: Process Modelling
MP10: Process Modelling MPhil Materials Modelling Dr James Elliott 0.1 MP10 overview 6 lectures on process modelling of metals and polymers First three lectures by JAE Introduction to polymer rheology
More informationSection 1: Four States of Matter (pages 60-67)
Name: Sci Number: Period: Parent Signature: My little book of: Word: Pg found States of matter Solid Four States of Matter: Section 1 definitions: (pg60) My definition Chp 3 Draw/paste examples of all
More informationViscous Flow and Convective Heat Transfer (EGFD 7041) Fall 2018
Viscous Flow and Convective Heat Transfer (EGFD 7041) Fall 2018 Introduction & Review Dr. Peter J. Disimile UC-FEST Department of Aerospace Engineering Peter.disimile@uc.edu 1 2 1 1.Basic Modes of Heat
More informationCHAPTER 1 Fluids and their Properties
FLUID MECHANICS Gaza CHAPTER 1 Fluids and their Properties Dr. Khalil Mahmoud ALASTAL Objectives of this Chapter: Define the nature of a fluid. Show where fluid mechanics concepts are common with those
More informationMr.N.Srikar M.Pharm.,(Ph.D) KRISHNA TEJA PHARMACY COLLEGE
. Mr.N.Srikar M.Pharm.,(Ph.D) KRISHNA TEJA PHARMACY COLLEGE CONTENTS Introduction Definition Importance Newton's laws Types of flow Viscosity Measurements of viscosity Pharmaceutical applications 2 INTRODUCTION
More informationIntroduction to Polymerization Processes
Introduction to Polymerization Processes Reference: Aspen Polymers: Unit Operations and Reaction Models, Aspen Technology, Inc., 2013. 1- Polymer Definition A polymer is a macromolecule made up of many
More informationA SLIPPERY SLIMY SUBSTANCE
A SLIPPERY SLIMY SUBSTANCE PRE LAB DISCUSSION Scientists must use exact language to communicate their observations and ideas to other scientists. Many words have different meanings to different people.
More information150A Review Session 2/13/2014 Fluid Statics. Pressure acts in all directions, normal to the surrounding surfaces
Fluid Statics Pressure acts in all directions, normal to the surrounding surfaces or Whenever a pressure difference is the driving force, use gauge pressure o Bernoulli equation o Momentum balance with
More informationRHEOLOGY AG.02/2005 AG0905
RHEOLOGY Rheology Basics TYPES OF RHEOLOGICAL BEHAVIOUR NEWTONIAN FLOW PSEUDOPLASTICITY SHEAR THINNING FLOW (case with Yield Value) THIXOTROPY Yield Value Viscosity Viscosity Viscosity Shear Rate. Shear
More informationPeriod #1 : CIVIL MATERIALS COURSE OVERVIEW
Period #1 : CIVIL MATERIALS COURSE OVERVIEW A. Materials Systems to be Addressed Metals and Alloys (steel and aluminum) Portland Cement Concrete Asphalt Cement Concrete Fiber Reinforced Composites Masonry
More informationSCH4U Synthesis and Polymers. Synthesis Reactions and Addition and Condensation Polymers
SCH4U Synthesis and Polymers Synthesis Reactions and Addition and Condensation Polymers ADDITION POLYMERS ADDITION POLYMERS A + A + A + A A A A A monomers polymer + + + ethylene (ethene) polyethylene
More informationQuartz, salt, and sugar are all compounds that are solids. Their similarities and differences partly come from the way their atoms or ions are
Quartz, salt, and sugar are all compounds that are solids. Their similarities and differences partly come from the way their atoms or ions are joined. A compound is made of two or more elements that are
More informationParticle charge and Rheology
Particle charge and Dispersions i in liquids: id suspensions, emulsions, and foams ACS National Meeting March 21 22, 2009 Salt Lake City 1 Electro-osmosis and electrophoresis Voltaic reports the pile in
More informationSUMMARY A STUDY OF VISCO-ELASTIC NON-NEWTONIAN FLUID FLOWS. where most of body fluids like blood and mucus are non-newtonian ones.
SUMMARY A STUDY OF VISCO-ELASTIC NON-NEWTONIAN FLUID FLOWS Non-Newtonian fluids abound in many aspects of life. They appear in nature, where most of body fluids like blood and mucus are non-newtonian ones.
More informationPolymers are high molecular mass macromolecules composed of repeating structural
Question 15.1: Explain the terms polymer and monomer. Polymers are high molecular mass macromolecules composed of repeating structural units derived from monomers. Polymers have a high molecular mass (10
More informationCPO Science Foundations of Physics. Unit 8, Chapter 27
CPO Science Foundations of Physics Unit 8, Chapter 27 Unit 8: Matter and Energy Chapter 27 The Physical Properties of Matter 27.1 Properties of Solids 27.2 Properties of Liquids and Fluids 27.3 Properties
More information(Refer Slide Time: 2:14)
Fluid Dynamics And Turbo Machines. Professor Dr Shamit Bakshi. Department Of Mechanical Engineering. Indian Institute Of Technology Madras. Part A. Module-1. Lecture-3. Introduction To Fluid Flow. (Refer
More informationConsider the case of a 100 N. mass on a horizontal surface as shown below:
1.9.1 Introduction The study of friction is called: The force of friction is defined as: The force of friction acting between two surfaces has three properties: i) ii) iii) Consider the case of a 100 N.
More informationLecture 7. Rheology. Hamid Alghurabi. Assistant Lecturer in Pharmaceutics
Physical Pharmacy Lecture 7 Rheology Assistant Lecturer in Pharmaceutics Overview Types of flow Newtonian systems Non-Newtonian systems Thixotropy Definition Applications in formulations Determination
More informationObjective Methods of Food Analysis. Brookfield Viscometer. Brookfield viscometer
Objective Methods of Food Analysis Brookfield Viscometer Measures the thickness, or viscosity, of liquid dispersions such as salad dressings. A measure of liquid texture. Brookfield viscometer 1 Compensating
More informationExperiment 26E LINEAR AND CROSSLINKED POLYMERS
Experiment 26E LINEAR AND RSSLINKED PLYMERS FV-12-5-05 MATERIALS: Resorcinol, 3 M Na, formalin, phthalic anhydride, anhydrous sodium acetate, ethylene glycol, glycerol, corn starch, Nylon 6,10 demo, ring
More informationPhysical Science Exam 3 Study Guide. Dr. Karoline Rostamiani. Chapter 3
Chapter 3 Section 1 States of Matter What is matter made of? What are the three most common states of matter? How do particles behave in each state of matter? Solids, Liquids, and Gases Materials can be
More informationMechanical properties of polymers: an overview. Suryasarathi Bose Dept. of Materials Engineering, IISc, Bangalore
Mechanical properties of polymers: an overview Suryasarathi Bose Dept. of Materials Engineering, IISc, Bangalore UGC-NRCM Summer School on Mechanical Property Characterization- June 2012 Overview of polymer
More informationName Class Date. KEY CONCEPT All living things are based on atoms and their interactions. atom ion molecule
Section 1: Atoms, Ions, and Molecules KEY CONCEPT All living things are based on atoms and their interactions. VOCABULARY atom ion molecule element ionic bond compound covalent bond MAIN IDEA: Living things
More informationPolymers in Modified Asphalt Robert Q. Kluttz KRATON Polymers
Polymers in Modified Asphalt Robert Q. Kluttz KRATON Polymers Polymers in Modified Asphalt Types of Polymers Compatibility of Polymers Effects of Polymers Analysis of polymers Recovery of PMA What Is a
More informationExperiment 26F FV 1/8/08 PREPARATION AND RECYCLING OF LINEAR AND CROSSLINKED POLYMERS
Experiment 26F FV 1/8/08 PREPARATIN AND REYLING F LINEAR AND RSSLINKED PLYMERS We gratefully acknowledge the United States Naval Academy for the use of this experiment MATERIALS: Resorcinol, 3 M Na, formalin,
More informationCustom Search Sponsored Links
Dynamic, Absolute and Kinematic Viscosity An introduction to dynamic, absolute and kinematic viscosity and how to convert between CentiStokes (cst), CentiPoises (cp), Saybolt Universal Seconds (SSU), degree
More informationThe functionality of a monomer is the number of binding sites that is/are present in that monomer.
Question 15.1: Explain the terms polymer and monomer. Polymers are high molecular mass macromolecules composed of repeating structural units derived from monomers. Polymers have a high molecular mass (10
More informationIntroduction to Rheology Basics
Introduction to Rheology Basics RheoTec Messtechnik GmbH Phone: ++49 (035205) 5967-0 Schutterwaelder Strasse 23 Fax: ++49 (035205) 5967-30 D-01458 Ottendorf-Okrilla E-mail: info@rheotec.de Germany Internet:
More informationScience of Slime. Fig. 1 Structure of poly (vinyl alcohol)
Name: Science of Slime Understanding the structure of a material and how it behaves is a large part of what chemists and materials scientists do for a living. Scientists and engineers cannot use new materials
More informationPolymers and Composite Materials
Polymers and omposite Materials Shibu G. Pillai hemical Engineering Department shibu.pillai@nirmauni.ac.in ontents lassification of Polymers Types of polymerization Elastomers/ Rubber Advanced Polymeric
More informationCoefficients of Restitution
Coefficients of Restitution Introduction Rubber balls The coefficient of restitution for a two-body collision is defined as the ratio of relative velocities after impact to relative velocities on approach.
More informationThe role of rheology in everyday fluid flow
The role of rheology in everyday fluid flow Doireann O Kiely Hannah Conroy Broderick, Alina Dubovskaya, Roberto Galizia, Claire Moran, Saviour Okeke, Shane Walsh, Adrian Wisdom Stokes Modelling Workshop
More informationExtraction and Refinement of Common Nonmetallic Materials
Extraction and Refinement of Common Nonmetallic Materials Alessandro Alessandro Anzalone, Anzalone, Ph.D. Ph.D. Hillsborough Community College, Brandon Campus Campus Agenda 1. Petrochemicals 2. Polymers
More informationThe lower the energy of a substance, the interaction between its atoms and molecules.
PHYSICAL STATES OF MATTER Kinetic Molecular Theory To understand the different states in which matter can exist, we need to understand something called the Kinetic Molecular Theory of Matter. Kinetic Molecular
More informationForces. Brought to you by:
Forces Brought to you by: Objects have force because of their mass and inertia Mass is a measure of the amount of matter/particles in a substance. Mass is traditionally measured with a balance. Inertia
More informationCan you imagine a world without plastics? Plastic soft drink containers,
21 Polymer Parts R EA D I N G Can you imagine a world without plastics? Plastic soft drink containers, bags, pens, DVDs, and computer and television parts are just a few things made of plastics that would
More informationEarth s Tectonic Plates
Earth s Tectonic Plates Lesson 3 The Earth is known as the blue planet because two-thirds of its surface lies beneath the ocean. Before the 19 th century most people thought the ocean floors were flat
More informationDownloaded from Unit - 15 POLYMERS. Points to Remember
Unit - 15 POLYMERS Points to Remember 1. Polymers are defined as high molecular mass macromolecules which consist of repeating structural units derived from the appropriate monomers. 2. In presence of
More informationChapter 6 Molten State
Chapter 6 Molten State Rheology ( 流變學 ) study of flow and deformation of (liquid) fluids constitutive (stress-strain) relation of fluids shear flow shear rate ~ dγ/dt ~ velocity gradient dv 1 = dx 1 /dt
More informationClassroom In this section of Resonance
Classroom In this section of Resonance, we invite readers to pose questions likely to be raised in a classroom situation. We may suggest strategies for dealing with them, or invite responses, or both.
More informationExperimental Investigation on Characteristics of Non- Newtonian Fluids
Experimental Investigation on Characteristics of Non- Newtonian Fluids Sudarshan B 1, Narayan U Rathod 2, and Victor Seram 3 1 Assistant Professor, Department of Mechanical Engineering, BMS college of
More information