Protect Inc. MATERIAL SAFETY DATA SHEET

Transcription

1 MATERIAL SAFETY DATA SHEET ÆGIS Microbe Shield AEM 5700 Antimicrobial (Typical Application Strength) Current Version: 01/06/2014 Note: This Material Safety Data Sheet has been prepared to provide information on the typical material remaining on a surface which has been treated with ÆGIS MICROBE SHIELD - AEM 5700 Antimicrobial. Antimicrobial is only sold as a concentrate in solvent. For application, ÆGIS MICROBE SHIELD -AEM 5700 Antimicrobial is diluted with water. The hydrolyzed material in the dilute solution then covalently or ionically bonds with the target surface and covalently bonds with itself to form a durable copolymer. Any CAS Numbers shown below are for the as supplied form of the antimicrobial. No CAS Numbers have been assigned for the intermediate hydrolyzed form or the resulting copolymer, neither of which are articles of commerce. SECTION 1 CHEMICAL PRODUCT AND COMPANY INFORMATION Protect Inc. Telephone: (866) Hespeler Rd, Fax: (866) Cambridge, On. N1R 8J6 SECTION 2 OSHA HAZARDOUS COMPONENTS CAS Number Wt.% Component Exposure Limits % Methyl Alcohol ppm; STEL 250 ppm % Octadecyldimethyltrihydroxysilylpropyl Ammonium Chloride % Chloropropyltrihydroxysilane sure to water or humid air % Water None OSHA PEL (final rule) and ACGIH TLV-skin: TWA 200 Observe above limits for methanol formed or exposure to water or humid air Observe above limits for methanol formed or expo- Protect Inc. AEM 5700 Antimicrobial (Typical Application Strength) Page 1

2 Oral Skin Inhalation Oral Protect Inc. AEM 5700 Antimicrobial (Typical Application Strength) Page 2

3 Containment/Cleanup Protect Inc. AEM 5700 Antimicrobial (Typical Application Strength) Page 3

4 SECTION 8 EXPOSURE CONTROLS / PERSONAL PROTECTION Recommended Recommended Recommended Eyes Skin Eyes Skin Colour Odour Viscosity ph Protect Inc. AEM 5700 Antimicrobial (Typical Application Strength) Page 4

5 SECTION 10 STABILITY AND REACTIVITY Comments SECTION 11 TOXICOLOGICAL INFORMATION SECTION 12 ECOLOGICAL INFORMATION Hazard Parameters (LC50 or EC50) High Medium Low Acute Aquatic Toxicity (mg/l) <=1 >1 and <=100 >100 Acute Terrestrial Toxicity (mg/kg) <-100 >100 and <= 2000 >2000 SECTION 13 DISPOSAL CONSIDERATIONS Protect Inc. AEM 5700 Antimicrobial (Typical Application Strength) Page 5

6 SECTION 14 REGULATORY INFORMATION Contents of this MSDS comply with the OSHA Hazard Communication Standard 29CFR TSCA Status: All chemical substances in this material are included on or exempted from listing on the TSCA Inventory of Chemical Substances. EPA SARA Title III Chemical Listings Section 302 Extremely Hazardous Substances None Section 304 CERCLA Hazardous Substances % Section 312 Hazard Class Acute: N* * Y= Yes N = No Supplemental State Compliance Information California CAS Number Section 313 Toxic Chemicals % Methyl alcohol Chronic: N Fire: N Pressure: N Reactive: N Wt.% Component Methyl alcohol Warning: This product contains the following chemical(s) listed by the State of California under the Safe Drinking Water and Toxic Enforcement Act of 1986 (Proposition 65) as being known to cause cancer. None Known Warning: This product contains the following chemical(s) listed by the State of California under the Safe Drinking Water and Toxic Enforcement Act of 1986 (Proposition 65) as being known to cause cancer. None Known Massachusetts % Methyl alcohol New Jersey % Octadecylaminodimethyl trimethoxysilylpropyl ammonium chloride % Chloropropyltrimethoxysilane % METHYL ALCOHOL; #1222 Pennsylvania % Octadecylaminodimethyl trimethoxysilylpropyl ammonium chloride % Chloropropyltrimethoxysilane % Methyl alcohol SECTION 15 OTHER INFORMATION ***** THIS IS THE LAST PAGE ***** Protect Inc. AEM 5700 Antimicrobial (Typical Application Strength) Page 6