Liquid Crystal. Liquid Crystal. Liquid Crystal Polymers. Liquid Crystal. Orientation of molecules in the mesophase
|
|
|
- Hector Patrick
- 5 years ago
- Views:
Transcription
1 Liquid Crystal - Liquid crystals (LCs) are a state of matter that have properties between those of a conventional liquid and those of a solid crystal. (Fourth state of matter) Liquid Crystal Orientation of molecules in the mesophase 1) Nematic phase 2) Smetic phase A 3) Smetic phase C - For instance, an LC may flow like a liquid, but its molecules may be oriented in a crystal-like way. Liquid crystalline polymer (LCP) - Lyotopic LCP : form in solution above critical conc. - Thermotropic LCP : form in the melt below critical temp rod-shaped organic molecules have no positional order, - but tend to point in the same direction - found at lower temperatures and more solid-like than the nematic - form well-defined layers thus positionally ordered along one direction - In the Smectic A phase, the molecules are oriented along the layer normal, - In the Smectic C phase, they are tilted away from the layer normal. 82 Liquid Crystal 4) Chiral nematic (Cholestreric) phase - a type of liquid crystal with a helical structure and which is therefore chiral. Liquid Crystal Polymers ex. Aromatic Polyamide (Lyotropic LCP) : Kevlar (Dupont) O O C C NH NH - They organize in layers with no positional ordering within layers, but a director axis which varies with layers. - The period of this variation (pitch, p) varies with temperature and it can also be affected by the boundary conditions when the chiral nematic liquid crystal is sandwiched between two substrate planes. Advantages of LCP : easy processing (low viscosity) and improved mechanical property (ordered alignment of polymer molecules) 83 84
2 Liquid Crystal Polymers Vulcanization of rubber - The properties of rubber can be dramatically altered by crosslinking the polymer chains. - This process, carried out with sulfur, is known as Vulcanization - The key chemical modification is that sulfide bridges are created between adjacent chains The sulfur interconnects the chains by reacting with the double bonds. - The crosslinking makes rubber non-sticky and improves its tensile strength. The material is no longer thermoplastic. - is crucial in making elastomers, as it prevents the chains from slipping past one another 88
3 Chemical cross-linking (curing) A. Definition and physical property change. a. Linking the polymer chains together through covalent bonds to form a network. b. Not to be soluble but swelling by any solvent. c. Not to be melted but decompose at any temperature. d. For ionic crosslinking, to be melted at high temperature. B. The method of chemical crosslinking. Effect of vulcanization on rubber molecules: (1) raw rubber, and (2) vulcanized (cross-linked) rubber. Variations of (2) include: (a) soft rubber, low degree of cross- linking; and (b) hard rubber, high degree of cross-linking 89 a. Simultaneous crosslinking during polymerization, using polyfunctional monomer. b. Stepwise crosslinking. First step : to make free polymer (linear or branched polymer). Second step : curing step to be made network from free polymer. 90 Chemical cross-linking Physical cross-linking A. Definition a. Not covalent crosslink but strong secondary force attraction between polymer chains. b. Physical crosslinked polymer can be recycled. B. Examples of physical crosslinking. a. Crystalline polymer : To act like crosslinked amorphous polymer. b. Hydrogen bond : Gelatin, an animal-derived protein. c. Block copolymer : A-B-A type. A : styrene, short-hard segment, microdomain. B : butadiene, long-soft segment, matrix. d. TPE : Thermoplastic elastomer
4 Physical cross-linking : thermoplastic elastomers (TPE) Disadvantages of chemical cross-liniking - stable mechanically and thermally, so once formed are difficult to break - cannot be dissolved or molded - cannot be recycled <Solution> Thermally labile crosslinks : Break apart on heating & Reform on cooling 1) Hydrogen bond : ex. Gelatin Physical cross-linking : thermoplastic elastomers (TPE) 3) Reversible covalent crosslink RT, 7days in bulk film 80 o C, > 2h 2) Ionic crosslink Reversible polymer cross-linking via Diels-Alder cycloaddition reaction between furan and maleimide Physical cross-linking : Physical cross-linking : Block copolymer 4) Crystallite 5) Block copolymer 95 Representation of aggregation in an ABA block thermoplastic elastomer 96
5 Physical cross-linking : Block copolymer A. Definition of polymer blends. a. Physical mixture of two or more different polymer or copolymer. b. No covalent bonds among the polymers. c. Polymer alloys : like metal alloys. d. Blending is much easier than developing new polymers B. Technology of polymer blendings. A) Miscible polyblends : Binary homogeneous blend Chemical Blends ex.interpenetrating Crosslinked polymer is swollen with different monomer, then monomer is polymer network (IPN) polymerized and crosslinked
Lecture No. (1) Introduction of Polymers
Lecture No. (1) Introduction of Polymers Polymer Structure Polymers are found in nature as proteins, cellulose, silk or synthesized like polyethylene, polystyrene and nylon. Some natural polymers can also
2. Amorphous or Crystalline Structurally, polymers in the solid state may be amorphous or crystalline. When polymers are cooled from the molten state
2. Amorphous or Crystalline Structurally, polymers in the solid state may be amorphous or crystalline. When polymers are cooled from the molten state or concentrated from the solution, molecules are often
Polymers in Modified Asphalt Robert Q. Kluttz KRATON Polymers
Polymers in Modified Asphalt Robert Q. Kluttz KRATON Polymers Polymers in Modified Asphalt Types of Polymers Compatibility of Polymers Effects of Polymers Analysis of polymers Recovery of PMA What Is a
POLYMER SCIENCE : lecture 1. Dr. Hanaa J. Alshimary Second class Poly. Eng. Dep. Introduction of Polymers Polymer poly mer Monomer Polymerization
Introduction of Polymers Polymer - The word polymer is the Greek word : poly means many and mer means unit or parts, A Polymer is a large molecule that comprises repeating structural units joined by the
Thermoplastic. Condensation. Homopolymer. Polymer POLYMERS. Synthetic. Natural. Addition. Copolymer. Polymer. Thermosetting
Thermoplastic Homopolymer Condensation Polymer Natural POLYMERS Synthetic Addition Polymer Copolymer Thermosetting Polymers are very large covalent molecular substances containing tens of thousands of
Introduction to Engineering Materials ENGR2000 Chapter 14: Polymer Structures. Dr. Coates
Introduction to Engineering Materials ENGR2000 Chapter 14: Polymer Structures Dr. Coates 14.1 Introduction Naturally occurring polymers Wood, rubber, cotton, wool, leather, silk Synthetic polymers Plastics,
MATERIALS SCIENCE POLYMERS
POLYMERS 1) Types of Polymer (a) Plastic Possibly the largest number of different polymeric materials come under the plastic classification. Polyethylene, polypropylene, polyvinyl chloride, polystyrene,
Polymers are high molecular mass macromolecules composed of repeating structural
Question 15.1: Explain the terms polymer and monomer. Polymers are high molecular mass macromolecules composed of repeating structural units derived from monomers. Polymers have a high molecular mass (10
Periodic table with the elements associated with commercial polymers in color.
Polymers 1. What are polymers 2. Polymerization 3. Structure features of polymers 4. Thermoplastic polymers and thermosetting polymers 5. Additives 6. Polymer crystals 7. Mechanical properties of polymers
The functionality of a monomer is the number of binding sites that is/are present in that monomer.
Question 15.1: Explain the terms polymer and monomer. Polymers are high molecular mass macromolecules composed of repeating structural units derived from monomers. Polymers have a high molecular mass (10
Chemistry in Biology. Section 1. Atoms, Elements, and Compounds
Section 1 Atoms, Elements, and Compounds Atoms! Chemistry is the study of matter.! Atoms are the building blocks of matter.! Neutrons and protons are located at the center of the atom.! Protons are positively
Effect of crystallinity on properties. Melting temperature. Melting temperature. Melting temperature. Why?
Effect of crystallinity on properties The morphology of most polymers is semi-crystalline. That is, they form mixtures of small crystals and amorphous material and melt over a range of temperature instead
Chapter 13 - Polymers Introduction
Chapter 13 - Polymers Introduction I. Nomenclature A. Polymer/Macromolecule polymer - nonmetallic material consisting of large molecules composed of many repeating units - from Greek: poly (many) and meros
Material Chemistry KJM 3100/4100. Synthetic Polymers (e.g., Polystyrene, Poly(vinyl chloride), Poly(ethylene oxide))
Material Chemistry KJM 3100/4100 Lecture 1. Soft Materials: Synthetic Polymers (e.g., Polystyrene, Poly(vinyl chloride), Poly(ethylene oxide)) Biopolymers (e.g., Cellulose derivatives, Polysaccharides,
Chemistry Class 12 th NCERT Solutions
This e-book is prepared by the CBSE board exam experts of jagranjosh.com, an online educational portal of Dainik Jagran. The purpose of providing solutions for CBSE class 12 th Science and Mathematics
Crystalline Solids have atoms arranged in an orderly repeating pattern. Amorphous Solids lack the order found in crystalline solids
Ch 12: Solids and Modern Materials Learning goals and key skills: Classify solids base on bonding/intermolecular forces and understand how difference in bonding relates to physical properties Know the
Chapter 11. Polymer Structures. Natural vs man-made
. Polymer Structures Polymers: materials consisting of long molecules - the word polymer comes from the Greek Polys = many Meros = parts Macromolecules (long size of the chains) many parts - typically,
POLYMERS: CHEMISTRY AND PHYSICS OF MODERN MATERIALS
POLYMERS: CHEMISTRY AND PHYSICS OF MODERN MATERIALS THIRD EDITION J.M.G. COWIE Heriot-Watt University Scotland,UK VALERIA ARRIGHI Heriot-Watt University Scotland,UK Contents Preface The Authors xv xvii
POLYMERS: MACROMOLECULES
C21 11/08/2013 16:8:37 Page 311 CHAPTER 21 POLYMERS: MACROMOLECULES SOLUTIONS TO REVIEW QUESTIONS 1. An addition polymer is one that is produced by the successive addition of repeating monomer molecules.
Downloaded from Unit - 15 POLYMERS. Points to Remember
Unit - 15 POLYMERS Points to Remember 1. Polymers are defined as high molecular mass macromolecules which consist of repeating structural units derived from the appropriate monomers. 2. In presence of
High strength high modulus Fibres
High strength high modulus Fibres Module 2: FAQ Q1. Define aramids. A manufactured fibre in which the fibre-forming substance is a long-chain synthetic polyamide in which at least 85% of the amide (-CO-NH-)
CHM 6365 Chimie supramoléculaire Partie 8
CHM 6365 Chimie supramoléculaire Partie 8 Liquid crystals: Fourth state of matter Discovered in 1888 by Reinitzer, who observed two melting points for a series of cholesterol derivatives Subsequent studies
A polymer is a very large molecule that is built from monomers. A monomer is one of the repeating units that make up a polymer.
1.8 Polymers The General Structure of Polymers A polymer is a very large molecule that is built from monomers. A monomer is one of the repeating units that make up a polymer. Many biological molecules,
Dr. M. Medraj Mech. Eng. Dept. - Concordia University MECH 221 lecture 19/2
Polymers Outline Introduction Molecular Structure and Configurations Polymer s synthesis Molecular weight of polymers Crystallinity You may think of polymers as being a relatively modern invention however
Chapter 6 Chemistry in Biology
Section 1: Atoms, Elements, and Compounds Section 2: Chemical Reactions Section 3: Water and Solutions Section 4: The Building Blocks of Life Click on a lesson name to select. 6.1 Atoms, Elements, and
Polymer Reaction Engineering
Polymer Reaction Engineering Polymerization Techniques Bulk Solution Suspension Emulsion Interfacial Polymerization Solid-State Gas-Phase Plasma Polymerization in Supercritical Fluids Bulk Polymerization
Physical Chemistry of Polymers (4)
Physical Chemistry of Polymers (4) Dr. Z. Maghsoud CONCENTRATED SOLUTIONS, PHASE SEPARATION BEHAVIOR, AND DIFFUSION A wide range of modern research as well as a variety of engineering applications exist
SCH4U Synthesis and Polymers. Synthesis Reactions and Addition and Condensation Polymers
SCH4U Synthesis and Polymers Synthesis Reactions and Addition and Condensation Polymers ADDITION POLYMERS ADDITION POLYMERS A + A + A + A A A A A monomers polymer + + + ethylene (ethene) polyethylene
Option C: Chemistry in industry and technology
Option C: Chemistry in industry and technology As one of the most important roles of chemistry is to make forms of matter that have never existed before, it plays a central role in any material revolution.
Polymers and Composite Materials
Polymers and omposite Materials Shibu G. Pillai hemical Engineering Department shibu.pillai@nirmauni.ac.in ontents lassification of Polymers Types of polymerization Elastomers/ Rubber Advanced Polymeric
TOPIC 7. Polymeric materials
Universidad Carlos III de Madrid www.uc3m.es MATERIALS SCIENCE AND ENGINEERING TOPIC 7. Polymeric materials 1. Introduction Definition General characteristics Historic introduction Polymers: Examples 2.
Covalent Compounds 1 of 30 Boardworks Ltd 2016
Covalent Compounds 1 of 30 Boardworks Ltd 2016 Covalent Compounds 2 of 30 Boardworks Ltd 2016 What are covalent bonds? 3 of 30 Boardworks Ltd 2016 When atoms share pairs of electrons, they form covalent
Unit - 15 POLYMERS Points to Remember 1. Polymers are defined as high molecular mass macromolecules which consist of repeating structural units derived from the appropriate monomers. 2. In presence of
2.1 Traditional and modern applications of polymers. Soft and light materials good heat and electrical insulators
. Polymers.1. Traditional and modern applications.. From chemistry to statistical description.3. Polymer solutions and polymer blends.4. Amorphous polymers.5. The glass transition.6. Crystalline polymers.7.
5.1 How Atoms Form Compounds. compound chemical formula molecule chemical bond ionic bond valence covalent bond
5.1 How Atoms Form Compounds compound chemical formula molecule chemical bond ionic bond valence covalent bond What is a compound? 5.1 How Atoms Form Compounds A compound is a pure substance that contains
Properties of Solutions
Properties of Solutions The States of Matter The state a substance is in at a particular temperature and pressure depends on two antagonistic entities: The kinetic energy of the particles The strength
III. Molecular Structure Chapter Molecular Size Size & Shape
III. Molecular Structure Chapter 3. 3. Molecular Size Size & Shape Molecular Structure (1)Molecular Size & Shape Size : molecular weight molecular weight distribution Shape : branching (2) Molecular Flexibility
Uniform properties throughout! SOLUTE(S) - component(s) of a solution present in small amounts.
37 SOLUTIONS - a SOLUTION is a HOMOGENEOUS MIXTURE. Uniform properties throughout! - parts of a solution: SOLUTE(S) - component(s) of a solution present in small amounts. SOLVENT - the component of a solution
Properties of Compounds
Chapter 6. Properties of Compounds Comparing properties of elements and compounds Compounds are formed when elements combine together in fixed proportions. The compound formed will often have properties
Chapter 10. Dipole Moments. Intermolecular Forces (IMF) Polar Bonds and Polar Molecules. Polar or Nonpolar Molecules?
Polar Bonds and Polar Molecules Chapter 10 Liquids, Solids, and Phase Changes Draw Lewis Structures for CCl 4 and CH 3 Cl. What s the same? What s different? 1 Polar Covalent Bonds and Dipole Moments Bonds
Chem 1075 Chapter 13 Liquids and Solids Lecture Outline
Chem 1075 Chapter 13 Liquids and Solids Lecture Outline Slide 2-3 Properties of Liquids Unlike gases, liquids respond dramatically to temperature and pressure changes. We can study the liquid state and
(Refer Slide Time: 00:58)
Nature and Properties of Materials Professor Bishak Bhattacharya Department of Mechanical Engineering Indian Institute of Technology Kanpur Lecture 18 Effect and Glass Transition Temperature In the last
POLYMER CHEMISTRY Lecture/Lession Plan -4
Chapter 6 POLYMER CHEMISTRY Lecture/Lession Plan -4 POLYMER CHEMISTRY 6.1 Rubber Rubber is a natural elastomeric polymer whose monomer unit is cis-2-methyle-1,3-butadiene. Raw rubber material is extracted
Uniform properties throughout! SOLUTE(S) - component(s) of a solution present in small amounts.
54 SOLUTIONS - a SOLUTION is a HOMOGENEOUS MIXTURE. Uniform properties throughout! - parts of a solution: SOLUTE(S) - component(s) of a solution present in small amounts. SOLVENT - the component of a solution
Chap. 2. Polymers Introduction. - Polymers: synthetic materials <--> natural materials
Chap. 2. Polymers 2.1. Introduction - Polymers: synthetic materials natural materials no gas phase, not simple liquid (much more viscous), not perfectly crystalline, etc 2.3. Polymer Chain Conformation
Chapter 9 Lesson 1: Substances and Mixtures
Chapter 9 Lesson 1: Substances and Mixtures Vocabulary -Substance -Heterogeneous mixture -Mixture -Homogeneous mixture -Solution Matter: Substances and Mixtures How do compounds and mixtures differ? Because
Properties of Water. Polar molecule Cohesion and adhesion High specific heat Density greatest at 4 o C Universal solvent of life
Properties of Water Polar molecule Cohesion and adhesion High specific heat Density greatest at 4 o C Universal solvent of life Polarity of Water In a water molecule two hydrogen atoms form single polar
A Glossary of Terms Used in the Adhesives, Coatings and Elastomers (ACE) Sector
A Glossary of Terms Used in the Adhesives, Coatings and Elastomers (ACE) Sector Abrasion resistance The ability of the coating membrane to resist mechanical action such as foot traffic and particles, which
COMPATIBILIZERS VISCOSITY CHAIN EXTENDERS MODIFIERS XIBOND BLEND OPTIMIZERS COUPLING AGENTS SURFACE MODIFIERS
COMPATIBILIZERS CHAIN EXTENDERS VISCOSITY MODIFIERS XIBOND BLEND OPTIMIZERS SURFACE MODIFIERS COUPLING AGENTS XIBOND Blend Optimizers At Polyscope, we offer a wide range of polymer additives for the compounding
PROPERTIES OF IONIC COMPOUNDS Excerpt from chemistry.about.com
PROPERTIES OF IONIC COMPOUNDS Excerpt from chemistry.about.com Here are the properties shared by the ionic compounds. Notice that the properties of ionic compounds relate to how strongly the positive and
1051-3rd Chem Exam_ (A)
1051-3rd Chem Exam_1060111(A) MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question. 1) The molecular-orbital model for Ge shows it to be A) a conductor,
PHASE TRANSITIONS IN SOFT MATTER SYSTEMS
OUTLINE: Topic D. PHASE TRANSITIONS IN SOFT MATTER SYSTEMS Definition of a phase Classification of phase transitions Thermodynamics of mixing (gases, polymers, etc.) Mean-field approaches in the spirit
1051-3rd Chem Exam_ (B)
1051-3rd Chem Exam_1060111(B) MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question. 1) In liquids, the attractive intermolecular forces are. A) strong enough
1051-3rd Chem Exam_ (C)
1051-3rd Chem Exam_1060111(C) MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question. 1) The hybridizations of iodine in IF3 and IF5 are and, respectively.
Polypropylene. Monomer. mer
Polymer Polymer: Maromolecule built-up by the linking together of a large no. of small molecules Ex. Nucleic acid, paper, bakelite,pvc Monomer: The small molecule which combine with each other Mer: The
(c) Dr. Payal B. Joshi
Polymer (Greek: poly=many; mer=part) Made up of large molecules characterized by repeating units called monomers held together by covalent bonds Functionality To act as monomer, it must have at least two
Introduction to Polymerization Processes
Introduction to Polymerization Processes Reference: Aspen Polymers: Unit Operations and Reaction Models, Aspen Technology, Inc., 2013. 1- Polymer Definition A polymer is a macromolecule made up of many
Chapter 12 - Modern Materials
Chapter 12 - Modern Materials 12.1 Semiconductors Inorganic compounds that semiconduct tend to have chemical formulas related to Si and Ge valence electron count of four. Semiconductor conductivity can
Liquid Crystalline Polymer Brushes
Liquid Crystalline Polymer Brushes by Kiana Amini A thesis presented to the University of Waterloo in fulfillment of the thesis requirement for the degree of Master of Applied Science in Chemical Engineering
Paul Rempp and Edward W. Merrill. Polymer Synthesis. 2nd, revised Edition. Hüthig & Wepf Verlag Basel Heidelberg New York
Paul Rempp and Edward W. Merrill Polymer Synthesis 2nd, revised Edition Hüthig & Wepf Verlag Basel Heidelberg New York Table of Contents Part I: Polymerization Reactions Chapter 1: General Considerations
Chemistry of Life Essential Questions
Chemistry of Life Essential Questions VMHS Standards 8.6b; 8.6c; 1h; 4e; 4f; 5a;1b; 1. What is an atom? What are elements? An atom is the basic unit of o Consist of,, and An element is a type of atom o
Materials Engineering with Polymers
Unit 73: Unit code Materials Engineering with Polymers K/616/2556 Unit level 4 Credit value 15 Introduction This unit will provide students with the necessary background knowledge and understanding of
Chemistry Review Unit 5 Physical Behavior of Matter
Chemistry Review Phases of Matter, Changes of Phase, Substances, Mixtures, Solutions, Effect of Solute on Solution, Energy, Kinetics of Solids, Liquids and Gases Matter, Phases and Gas Laws 1. Matter is
How do Elements Combine to Form Compounds?
How do Elements Combine to Form Compounds? ACTIVITY What is it made of? Compounds account for the huge variety of matter on Earth All the compounds that exist on Earth are built from elements 118 elements
Lecture 8. Polymers and Gels
Lecture 8 Polymers and Gels Variety of polymeric materials Polymer molecule made by repeating of covalently joint units. Many of physical properties of polymers have universal characteristic related to
General Chemistry A
General Chemistry 1140 - A May 6, 2004 (6 Pages, 43 Parts) Name Each of the 40 multiple choice questions counts 2 point. Give the letter of the correct answer. 1. 2. Crystalline solids differ from amorphous
Supplementary Information
Supplementary Information Microactuators from a main-chain liquid crystalline elastomer via thiol-ene click chemistry Eva-Kristina Fleischmann, F. Romina Forst, Katrin Köder, Rudolf Zentel* Institute of
Uniform properties throughout! SOLUTE(S) - component(s) of a solution present in small amounts.
54 SOLUTIONS - a SOLUTION is a HOMOGENEOUS MIXTURE. Uniform properties throughout! - parts of a solution: SOLUTE(S) - component(s) of a solution present in small amounts. SOLVENT - the component of a solution
Introduction to Synthetic Methods in Step-Growth Polymers 1.1 INTRODUCTION Historical Perspective Some of the earliest useful polymeric
Synthetics Polymers Introduction to Synthetic Methods in Step-Growth Polymers 1.1 INTRODUCTION 1.1.1 Historical Perspective Some of the earliest useful polymeric materials, the Bakelite resins formed from
How do Elements Combine to Form Compounds?
How do Elements Combine to Form Compounds? ACTIVITY What is it made of? Think about the calcium atom vs the calcium ion Compounds account for the huge variety of matter on Earth All the compounds that
Chapter : 15. POLYMERS. Level-1:Questions
1) What are polymers? Chapter : 15. POLYMERS Level-1:Questions A: These are referred to as Macromolecules which are formed by joining of repeating structural units on a large scale. 2) Give two examples
Chemistry Review Unit 4 Chemical Bonding
Chemistry Review The Nature of Chemical Bonding, Directional Nature of Covalent Bonds, Intermolecular Forces Bonding 1. Chemical compounds are formed when atoms are bonded together. Breaking a chemical
of its physical and chemical properties.
8.4 Molecular Shapes VSEPR Model The shape of a molecule determines many of its physical and chemical properties. Molecular l geometry (shape) can be determined with the Valence Shell Electron Pair Repulsion
Materials of Engineering ENGR 151 POLYMER STRUCTURES
Materials of Engineering ENGR 151 POLYMER STRUCTURES LEARNING OBJECTIVES Understand different molecular and crystal structures of polymers What are the general structural and chemical characteristics of
Lecture 8 Polymers and Gels
Lecture 8 Polymers and Gels Variety of polymeric materials Polymer molecule made by repeating of covalently joint units. Living polymers (not considered in this lecture) long-chain objects connected by
Ionic Compounds and Ionic Bonding
Ionic Compounds and Ionic Bonding Definitions Review: Crystal Lattice - 3D continuous repeating pattern of positive and negative ions in an ionic solid Formula Unit- smallest possible neutral unit of an
Elements and Isotopes
Section 2-1 Notes Atoms Life depends on chemistry. The basic unit of matter is the atom. Atoms are incredibly small The subatomic particles that make up atoms are protons, neutrons, and electrons. Parts
Theories of Adhesion
Theories of Adhesion Mechanical Theory According to mechanical theory, adhesion occurs by the penetration of adhesives into pores, cavities, and other surface irregularities of the surface of the substrate
Step 1: Solute particles must separate from each other. Since energy must be absorbed to overcome the forces of attraction between solute particles,
Step 1: Solute particles must separate from each other. Since energy must be absorbed to overcome the forces of attraction between solute particles, this process is endothermic. Step 2: Solvent particles
COMPOSITE MATERIALS. Asst. Prof. Dr. Ayşe KALEMTAŞ
COMPOSITE MATERIALS Office ours: Tuesday, 16:30-17:30 akalemtas@mu.edu.tr, akalemtas@gmail.com Phone: +90 252 211 19 17 Metallurgical and Materials Engineering Department ISSUES TO ADDRESS Polymers Applications
Chapter 5 Review/Practice Test
Chapter 5 Review/Practice Test Name Multiple Choice Identify the choice that best completes the statement or answers the question. 1. Electrons involved in bonding between atoms are a. closest to the nucleus.
Chemistry of Life: Water and Solutions
Chemistry of Life: Water and Solutions Unit Objective I can describe the role of organic and inorganic chemicals important to living things. During this unit, we will answer the following very important
The lattice model of polymer solutions
The lattice model of polymer solutions Marc R. Roussel Department of Chemistry and Biochemistry University of Lethbridge February 25, 2009 1 The lattice model of polymer solutions In the last note, we
Section 6.2A Intermolecular Attractions
Section 6.2A Intermolecular Attractions As we know, molecules are held together by covalent bonds, but there are also attractive forces BETWEEN individual molecules (rather than within). These are called
Ch. 11: Liquids and Intermolecular Forces
Ch. 11: Liquids and Intermolecular Forces Learning goals and key skills: Identify the intermolecular attractive interactions (dispersion, dipole-dipole, hydrogen bonding, ion-dipole) that exist between
UNIT 1: BIOCHEMISTRY
UNIT 1: BIOCHEMISTRY UNIT 1: Biochemistry Chapter 6.1: Chemistry of Life I. Atoms, Ions, and Molecules A. Living things consist of atoms of different elements 1. An atom is the smallest basic unit of matter
Conjugated Dienes and Ultraviolet Spectroscopy
Conjugated Dienes and Ultraviolet Spectroscopy Key Words Conjugated Diene Resonance Structures Dienophiles Concerted Reaction Pericyclic Reaction Cycloaddition Reaction Bridged Bicyclic Compound Cyclic
Name Biology Chapter 2 Note-taking worksheet
Name Biology Chapter 2 Note-taking worksheet The Nature of Matter 1. Life depends on Atoms 1. The study of chemistry starts with the basic unit of matter, the. 2. The atom was first used by the Greek philosopher
Ch 14 Conjugated Dienes and UV Spectroscopy
Ch 14 Conjugated Dienes and UV Spectroscopy Conjugated Systems - Conjugated systems have alternating single and double bonds. For example: C=C C=C C=C and C=C C=O - This is not conjugated because the double
An Introduction to Polymer Physics
An Introduction to Polymer Physics Why & What Why do you choose this course? What do you know about polymer (physics)? Wentao Hao College of Chemical Engineering Hefei University of 2 Physics Physics (Greek(
Ever come to work. And get the feeling it s not going to be such a good day?
Ever come to work And get the feeling it s not going to be such a good day? Water The Key To Life On Earth (or one of them, anyway) Why Water Is Your Friend Water has several properties which make life
Ionic and Covalent Bonding
1. Define the following terms: a) valence electrons Ionic and Covalent Bonding the electrons in the highest occupied energy level always electrons in the s and p orbitals maximum of 8 valence electrons
The Chemistry of Life
The Chemistry of Life Things you should be able to do 1. Describe how the unique properties of water support life on Earth. 2. Explain how carbon is uniquely suited to form biological macromolecules. 3.
Experiment 5. Synthetic Polymers.
Experiment 5. Synthetic Polymers. References: Brown & Foote, Chapters 24 INTRODUCTION: A polymer (Greek: polys + meros = many parts) is a giant or macromolecule made up of repeating structural units. The
Mechanical properties of polymers: an overview. Suryasarathi Bose Dept. of Materials Engineering, IISc, Bangalore
Mechanical properties of polymers: an overview Suryasarathi Bose Dept. of Materials Engineering, IISc, Bangalore UGC-NRCM Summer School on Mechanical Property Characterization- June 2012 Overview of polymer
Lecture 27 More Polymers
Lecture 27 More Polymers Step Chain April 26, 2016 Midterm Exam III Where: WEL 1.316!! When: Wed., May 4 th, 7:00 9:00 PM What: Covers lectures through 4/28 Review Session: Mon & Tues. 5-6 PM Monday PAI
Packing of Atoms in Solids [5]
![Packing of Atoms in Solids [5]](/thumbs/86/93194786.jpg "Packing of Atoms in Solids [5]")
Packing of Atoms in Solids [5] Non dense, random packing Energy typical neighbor bond length typical neighbor bond energy r Dense, ordered packing Energy typical neighbor bond length typical neighbor bond
Chapter 4 Polymer solutions
Chapter 4 Polymer solutions 4.1 Introduction Solution: any phase containing more than one component.(gas, liquid or solid) Polymer solution is important: Classical analyses of polymers are conducted on
LONDON DISPERSION FORCES. - often called "London forces" for short. - London forces occur in all molecules, polar or nonpolar.
43 LONDON DISPERSION FORCES - often called "London forces" for short. - occurs because electron density is - at any given point in time - likely to be uneven across a molecule due to the simple fact that
Lecture 27 More Polymers
Lecture 27 More Polymers Step Chain April 25, 2018 Where: MEZ 1.306!! Final Exam When: Friday, May 11 th, 2:00 5:00 PM Do: Study lecture notes, homework, reading Practice: Hydrolysis, signatures and synthesis.