SHORT ANSWER QUESTIONS UNIT I: POLYMERS AND BUILDING MATERIALS
|
|
- Candace Banks
- 5 years ago
- Views:
Transcription
1 SHORT ANSWER QUESTIONS UNIT I: POLYMERS AND BUILDING MATERIALS 1. Define polymer. Give one example. 2. What is monomer? Give one example. 3. What is polymerization? 4. What is degree of polymerization? Give example. 5. What is functionality? Give example 6. What is tacticity of polymer? 7. What is Isotactic Polymer? 8. What is Atactic polymer? 9. What is Syndiotactic polymer? 10. What is addition polymerization? Give one example 11. What is condensation polymerization? Give one example 12. What is co-polymerization? Give one example 13. Write any two differences between addition and condensation polymerization. 14. What is thermoplastic? Give one example. 15. What is thermosetting? Give one example 16. Write any two differences between thermoplastic and thermosetting. 17. What are the monomers used in Bakelite polymer. 18. Write the structure of Bakelite. 19. Write any two uses of Bakelite. 20. Write the preparation of poly vinyl chloride. 21. Write any two uses of PVC. 22. Write the preparation of PTFE. 23. Write any two uses of PTFE. 24. Write the preparation of PE. 25. Write any two uses of PE. 26. Write any two properties of plastics. 27. What are the additives used in plastics? 28. Draw the diagram of compression moulding. 29. Draw the diagram of injection moulding. 30. Draw the diagram of transfer moulding. 31. Draw the diagram of extrusion moulding. 32. What are the types of cements? 33. What are the raw materials used for the manufacturing of Portland cement. 34. What are the chemical reactions takes place at clinker Zone in rotary kiln. 35. Write any two differences between dry process and wet process.
2 UNIT-II: WATER TECHNOLOGY 1) If the hardness of water sample is 14 degree Clarke, what is the hardness in terms of ppm? 2) What is hardness of water due to? 3) What is degree of hardness? 4) How temporary hardness differs from permanent hardness? 5) What is sedimentation? 6) Write any two harmful affects of silica present in water? 7) Is water obtained from zeolite process is free from all impurities. Justify. 8) What is reverse osmosis? 9) Why magnesium bicarbonate requires double amount of lime for softening? 10) Explain why water containing dissolved calcium and magnesium salt cause hardness. 11) Why is NH 4 Cl and NH 4 OH buffer added during the determination of hardness? 12) What is the indicator used in EDTA method? 13) During sterilization why cloramine is preferred to bleaching powder? 14) What is meant by softening of water? 15) What is break point chlorination? 16) Name any two coagulants. 17) Name the gases dissolved in water which causes corrosion. 18) How is temporary hardness removed? 19) What are the advantages of ion-exchange process? 20) A sample of hardwater contains 14.6 gms of Magnesium bicarbonate and 9.5 gms of MgCl 2 and 13.6 gms of CaSO 4. What is the permanent, temporary and total hardness of the water sample? 21) How is dissolved oxygen removed from boiler feed water? 22) What is meant by dechlorination? 23) Explain the role of chemical coagulants. 24) Explain the role of anion exchange. 25) Why hot lime soda process is advantageous over cold lime soda process? 26) What is desalination? Mention the various methods available for desalination? 27) What are the requisites of drinking water? 28) Write any two differences between permutit, lime-soda and ion exchange process?
3 UNIT-III: SCIENCE OF CORROSION 1. Define corrosion and write on example. 2. What is dry corrosion? 3. What is oxidation corrosion? 4. Write the chemical reactions of oxidation corrosion. 5. What is protective film? Give examples. 6. What is non-protective film? Give examples. 7. What is wet or electrochemical corrosion? 8. Write the equation for formation of rusting of iron. 9. What is protective coating? Give example. 10. What is protective coating? Give example. 11. What is protective coating? Give example. 12. What is non-protective coating? Give example. 13. What is concentration cell? Give example 14. What is stress cell? Give example 15. What is galvanic series? Write importance of it. 16. Write any two differences between electrochemical series and galvanic series. 17. What is Pilling- bedworth rule? 18. Give one example for sacrificial anodic protection method. 19. Give one example for impressed current catholic protection. 20. Write any two differences between sacrificial anodic protection and impressed current catholic protection. 21. Write any two differences between anode coating and cathode coating. 22. What is galvanizing? 23. What is tinning? 24. What is metal cladding? 25. Draw the diagram of sacrificial anode protection. 26. Draw the diagram of impressed current catholic protection.
4 UNIT-IV: FUEL TECHNOLOGY AND LUBRICANTS 1. How the petroleum/crude oil is classified? 2. What is the composition of paraffinic base type crude oil? 3. What is the composition of asphaltic base type crude oil? 4. What is the composition of mixed type base crude oil? 5. What is refining of petroleum and describe the steps involved in it? 6. What is cracking of petroleum and how many types of cracking are there? 7. What is the major difference between thermal cracking and catalytic cracking? 8. What are the synthetic methods for the preparation of petroleum? 9. What is the major difference between thermal and catalytic polymerization? 10. What is the raw material, which has taken in Fischer-Tropsh method? 11. What is the raw material, which has taken in Bergius method? 12. What is reforming and write the difference between thermal and catalytic reforming? 13. Give an example for each reforming methods i. Dehydrogenation, ii. De hydro cyclization, iii. Hydro cracking iv. Isomerization 14. Write the order of knocking tendency of a fuel basing on their structure in case of petrol? 15. What is octane rating/ octane number and describe its importance? 16. What is cetane number and describe its importance? 17. What is the importance of anti knocking agents and give an example for it? 18. Write the order of knocking tendency of a fuel basing on their structure in case of diesel? 19. Define lubrication? 20. Write the functions of good lubricant? 21. What is the mechanism of thick film/ hydrodynamic lubrication? 22. What is the mechanism of thin film/boundary lubrication? 23. What is the mechanism of extreme pressure lubrication? 24. How many types of lubricants are there? 25. What are the limitations and advantages of liquid lubricants? 26. What are the advantages and limitations of solid lubricants? 27. What is viscosity index and explain the effect of temperature on it? 28. What is the importance of viscosity index? 29. Define cloud and pour point? 30. What is the importance of cloud and pour point? 31. Define flash and fire point? 32. What is the importance of flash and fire point? 33. Define aniline point? 34. What is the importance of aniline point? 35. Define mechanical stability? 36. What is the importance of mechanical stability? 37. Define neutralization point/ acid number? 38. What is the importance of acid number?
5 UNIT-V: SOLAR ENERGY, GREEN CHEMISTRY AND NANO TECHNOLOGY 1. What is meant by harnessing of solar energy? 2. What is meant by photo voltaic cells? Give at least two applications. 3. What is solar thermal power plant? Mention its types. 4. Define green house effect. What are green house gases? 5. Mention the consequences of global warming. 6. Describe the depletion of ozone layer. 7. Define green chemistry. 8. List out any six principles of green chemistry. 9. Define ATOM ECONOMY and mention the formula to calculate it. 10. Mention the five key words in principles of green chemistry. 11. Give the list of any four synthesis of green chemistry and mention its advantages. 12. Give any four applications of green chemistry. 13. Write the principle of aqueous phase method and supercritical method. 14. Define nano materials with its dimensions and examples. 15. Write a short note on carbon nano tube(cnt) 16. Give the principle of arc discharge method. 17. Give the principle of laser ablation method. 18. Give the principle of chemical vapor deposition method. 19. Which type of laser is used in laser ablation technique and why? 20. Write the difference between SWNT and MWNT. 21. What are the specific conditions for arc discharge method? 22. What is the necessity of substrate used in CVD and what type of gases substance used in this method. 23. Write few engineering applications of CNT s in fuel cells? 24. Write few engineering applications of CNT s in catalysis? 25. Write few engineering applications of CNT s in medicine? 26. Write about the structure of fullerenes C60? 27. Describe few engineering applications of fullerenes. 28. What are gold nanoparticles and silver nanoparticles. 29. Mention the properties of gold nanoparticles. 30. Give few applications of gold nanoparticles in engineering? 31. Give few applications of gold nanoparticles in bio-medical? 32. Mention the properties of silver nanoparticles. 33. Give few applications of silver nanoparticles in engineering? 34. Give few medical applications of silver nanoparticles?
2011 ENGINEERING CHEMISTRY - II
Set No. 1 1. (a) with suitable examples explain addition polymerization, condensation polymerization and co-polymerization. (b) Give a brief account of conducting polymers. (c) Write the preparation, properties
More informationSEM-I QUESTION BANK SUBJECT: Engineering Chemistry. Unit I- Water Technology
SEM-I QUESTION BANK SUBJECT: Engineering Chemistry Unit I- Water Technology Q.1. a) Calculate the amount of Lime and soda required to soften 1, 00,000 liters of water containing following impurities, Ca(HCO
More informationENGINEERING CHEMISTRY
ENGINEERING CHEMISTRY [As per Choice Based Credit System (CBCS) scheme] (Effective from the academic year 2017-2018) SEMESTER - I/II Subject Code 17CHE12/17CHE22 IA Marks 40 Number of Lecture Hours/Week
More informationCE Chemistry ~ Paper II. by Alan Cheng
CE Chemistry ~ Paper II by Alan Cheng 2 There are 30 questions in Section A and 20 questions in Section B. Atomic numbers and relative atomic masses of elements can be obtained from the Periodic Table
More informationElectrochemistry Pulling the Plug on the Power Grid
Electrochemistry 18.1 Pulling the Plug on the Power Grid 18.3 Voltaic (or Galvanic) Cells: Generating Electricity from Spontaneous Chemical Reactions 18.4 Standard Electrode Potentials 18.7 Batteries:
More informationSTANDARD GRADE CHEMISTRY : GENERAL LEVEL
STANDARD GRADE CHEMISTRY : GENERAL LEVEL NEED TO KNOW SHEETS (BASED ON 1998 2006 EXAMS) TOPIC NO 1 -ide means two elements only ate/-ite means two elements + oxygen a solution contains a solid (solute)
More informationShort answer questions with solutions. Phase Rule
Short answer questions with solutions Phase Rule 1. State condensed phase rule and where it is applicable. In two component systems and for minimum one phase the degree of freedom becomes 3 and a three
More informationDefinition 1 An element or compound is oxidized when it gains oxygen atoms
Oxidation and Reduction Part I Learning Outcomes 1. Introduction to oxidation and reduction: simple examples only, e.g. Na with Cl 2, Mg with O 2, Zn with Cu 2+. 2. Oxidation and reduction in terms of
More informationAngel International SchoolManipay
Grade OL Angel International SchoolManipay 2 nd Term Examination March, 2016 Chemistry Duration: 3 Hours 1. Which property is common to calcium, potassium and sodium? a) Their atoms all lose two electrons
More informationAQA Chemistry Checklist
Topic 1. Atomic structure Video: Atoms, elements, compounds, mixtures Use the names and symbols of the first 20 elements in the periodic table, the elements in Groups 1 and 7, and other elements in this
More informationVPKBIET, FE SEMESTER - II ENGINEERING CHEMISTRY THEORY QUESTION BANK
VPKBIET, FE 2017-18 SEMESTER - II ENGINEERING CHEMISTRY THEORY QUESTION BANK UNIT- I: WATER TECHNOLOGY Q1. Describe Demineralisation process of softening of hard water. What are its advantages over Zeolite
More informationGCSE CHEMISTRY REVISION LIST
GCSE CHEMISTRY REVISION LIST OCR Gateway Chemistry (J248) from 2016 Topic C1: Particles C1.1 Describe the main features of the particle model in terms of states of matter and change of state Explain, in
More informationWorksheet Chapter 14: Chemistry in industry and technology glossary
Worksheet 14.1 Chapter 14: Chemistry in industry and technology glossary Active site The region of an enzyme or catalyst that binds the substrate or reactant molecule(s) and catalyzes a reaction. Addition
More informationPolymer Reaction Engineering
Polymer Reaction Engineering Polymerization Techniques Bulk Solution Suspension Emulsion Interfacial Polymerization Solid-State Gas-Phase Plasma Polymerization in Supercritical Fluids Bulk Polymerization
More informationwas heated strongly in the absence of air. + 2C + C
Q1. (a) The hydrocarbon C 16 34 was heated strongly in the absence of air. This is one of the reactions which took place: C 16 34 C 6 14 + C 6 12 + 2C 2 4 This type of reaction is carried out because there
More informationKenya Certificate of Secondary Education (K.C.S.E.)
Name: Index No. School:. Candidate s Sign.... Date:... 233/1 CHEMISTRY PAPER 1 JULY /AUGUST 2011 TIME: 2 HOURS Kenya Certificate of Secondary Education (K.C.S.E.) Chemistry Paper 1 INSTRUCTIONS TO THE
More informationIntroduction to electrochemistry
Introduction to electrochemistry Oxidation reduction reactions involve energy changes. Because these reactions involve electronic transfer, the net release or net absorption of energy can occur in the
More informationEdexcel Chemistry Checklist
Topic 1. Key concepts in chemistry Video: Developing the atomic model Describe how and why the atomic model has changed over time. Describe the difference between the plum-pudding model of the atom and
More informationJ.S.S. ACADEMY OF TECHNICAL EDUCATION, BENGALURU. DEPARTMENT OF CHEMISTRY. LESSON PLAN Academic Term:
J.S.S. ACADEMY OF TECHNICAL EDUCATION, BENGALURU. DEPARTMENT OF CHEMISTRY LESSON PLAN Academic Term: 2016-17 Course Name: Engineering chemistry theory Course Code:15CHE12/22 Branch/Sem: I/II Name of the
More informationLecture 25: Manufacture of Maleic Anhydride and DDT
Lecture 25: Manufacture of Maleic Anhydride and DDT 25.1 Introduction - In this last lecture for the petrochemicals module, we demonstrate the process technology for Maleic anhydride and DDT. - Maleic
More informationEDEXCEL IGCSE chemistry (double award)
EDEXCEL IGCSE chemistry (double award) Section 1: Principles of chemistry a) States of matter 1.1 understand the three states of matter in terms of the arrangement, movement and energy of the particles
More information************************************************************************************** NSS1 ( )
Yan Oi Tong Tin Ka Ping Secondary School NSS1 Chemistry Teaching Schedule (2018 2021) NSS1 Chemistry (2018 2021) / Teaching Schedule / P.1 **************************************************************************************
More informationLearning Model Answers Year 11 Double Chemistry
1 Describe ionic bonding Describe covalent bonding Occurs between metals and non-metals. Electrons are transferred. There is an electrostatic force of attraction between oppositely charged ions. Occurs
More informationCHEMISTRY HIGHER LEVEL
*P15* PRE-LEAVING CERTIFICATE EXAMINATION, 2009 CHEMISTRY HIGHER LEVEL TIME: 3 HOURS 400 MARKS Answer eight questions in all These must include at least two questions from Section A All questions carry
More informationPart 8- Chemistry Paper 2 Using Resources Triple Science
Part 8- Chemistry Paper 2 Using Resources Triple Science How bonding and structure are related to the properties of substances A simple model of the atom, symbols, relative atomic mass, electronic charge
More informationOxidation-Reduction Review. Electrochemistry. Oxidation-Reduction Reactions. Oxidation-Reduction Reactions. Sample Problem.
1 Electrochemistry Oxidation-Reduction Review Topics Covered Oxidation-reduction reactions Balancing oxidationreduction equations Voltaic cells Cell EMF Spontaneity of redox reactions Batteries Electrolysis
More informationUnit C1: Chemistry in our world Page 1 of 5
Unit C1: Chemistry in our world Page 1 of 5 Lesson Specification learning outcomes Edexcel 360 Science Specification match Edexcel 360 Science GCSE Science Students Book page reference Additional information
More informationUnit 4: Chemical Changes (Higher Content)
Metals react with oxygen to produce metal oxides. E.g. Copper + Oxygen > Copper Oxide The reactions are oxidation reactions because the metals gain oxygen. Reactivity of Metals Metal Extraction Metals
More informationApplications of Voltaic Cells
Applications of Voltaic Cells Lesson 4 chapter 13 Objective You will be able to explain how the development of the voltaic cell had affected society. Dry Cells Since voltaic cells are not portable, dry
More informationRedox reactions & electrochemistry
Redox reactions & electrochemistry Electrochemistry Electrical energy ; Chemical energy oxidation/reduction = redox reactions Electrochemistry Zn + Cu 2+ º Zn 2+ + Cu Oxidation-reduction reactions always
More informationCHEM Principles of Chemistry II. Chapter 17 - Electrochemistry
CHEM 1212 - Principles of Chemistry II Chapter 17 - Electrochemistry electrochemistry is best defined as the study of the interchange of chemical and electrical energy 17.1 Galvanic Cells an oxidation-reduction
More informationQ1. Which one of the following is least likely to occur in the reaction between methane and chlorine?
Q1. Which one of the following is least likely to occur in the reaction between methane and chlorine? A B C D C 4 + Cl C 3 + Cl C 3 + Cl C 3 Cl + C 3 + Cl 2 C 3 Cl + Cl C 3 Cl + Cl C 2 Cl + Cl (Total 1
More informationThe chemical equations for synthesis reactions fit the general pattern:
Synthesis Reactions In a, two reactants combine to form one larger or more complex product. For this to occur, the reactants must first ; existing bonds between their atoms, and new bonds. The chemical
More informationEquilibria in electrolytes solutions and water hardness
Equilibria in electrolytes solutions and water hardness by Urszula LelekBorkowska Electrolytes When the substance dissolved in water or other solvent exhibits electrical conductivity it is called an electrolyte.
More informationElectrochemistry. Review oxidation reactions and how to assign oxidation numbers (Ch 4 Chemical Reactions).
Electrochemistry Oxidation-Reduction: Review oxidation reactions and how to assign oxidation numbers (Ch 4 Chemical Reactions). Half Reactions Method for Balancing Redox Equations: Acidic solutions: 1.
More informationCracking. 191 minutes. 186 marks. Page 1 of 27
3.1.6.2 Cracking 191 minutes 186 marks Page 1 of 27 Q1. (a) Gas oil (diesel), kerosine (paraffin), mineral oil (lubricating oil) and petrol (gasoline) are four of the five fractions obtained by the fractional
More informationOCR Chemistry Checklist
Topic 1. Particles Video: The Particle Model Describe the main features of the particle model in terms of states of matter. Explain in terms of the particle model the distinction between physical changes
More informationEdexcel Chemistry Checklist
Topic 1. Key concepts in chemistry Video: Atomic Structure Recall the different charges of the particles that make up an atom. Describe why atoms have no overall charge. Use the periodic table to identify
More informationEdexcel Chemistry Checklist
Topic 1. Key concepts in chemistry Video: Developing the atomic model Describe how and why the atomic model has changed over time. Describe the difference between the plum-pudding model of the atom and
More informationAQA Chemistry Checklist
Topic 1. Atomic structure Video: Atoms, elements, compounds, mixtures Use the names and symbols of the first 20 elements in the periodic table, the elements in Groups 1 and 7, and other elements in this
More informationOCR Chemistry Checklist
Topic 1. Particles Video: The Particle Model Describe the main features of the particle model in terms of states of matter. Explain in terms of the particle model the distinction between physical changes
More informationChemistry: The Central Science. Chapter 20: Electrochemistry
Chemistry: The Central Science Chapter 20: Electrochemistry Redox reaction power batteries Electrochemistry is the study of the relationships between electricity and chemical reactions o It includes the
More informationammonia carbon dioxide hydrogen nitrogen electrical heat solar sound (a) In air, the two most common gases are oxygen and...
Chemistry C1 Foundation Questions Q1. Choose words from this list to complete the sentences, ammonia carbon dioxide hydrogen nitrogen electrical heat solar sound (a) In air, the two most common gases are
More informationPersonalised Learning Checklists AQA Chemistry Paper 2
AQA Chemistry (8462) from 2016 Topics C4.6 The rate and extent of chemical change Calculate the rate of a chemical reaction over time, using either the quantity of reactant used or the quantity of product
More informationCHAPTER-2 NCERT SOLUTION
CHAPTER-2 NCERT SOLUTION Page no. 15 Question 1: What is meant by a pure substance? Answer 1: A pure substance is the one that consists of a single type of particles, i.e., all constituent particles of
More informationLe Lycee Mauricien. Proposed Syllabus Chemistry (5070) - Form 5
Le Lycee Mauricien Proposed Syllabus 2017 Chemistry (5070) - Form 5 First Term 1. Metals Properties of metals - Physical properties of metals - Structure of alloys and uses Reactivity Series - Place metals
More informationthe study of the interchange of and energy reactions are oxidationreduction
the study of the interchange of and energy reactions are oxidationreduction reactions. : oxidation loss of e -, reduction gaining of e - 1. Oxidation = loss of electrons; increase in charge a. the substance
More informationSCHOOL YEAR CH- 19 OXIDATION-REDUCTION REACTIONS SUBJECT: CHEMISTRY GRADE: 12
SCHOOL YEAR 2017-18 NAME: CH- 19 OXIDATION-REDUCTION REACTIONS SUBJECT: CHEMISTRY GRADE: 12 TEST A Choose the best answer from the options that follow each question. 1. During oxidation, one or more electrons
More information10.3 Types of Chemical Reactions
10.3 Types of Chemical Reactions Chemical equations follow certain patterns Combination (synthesis ) The number of possible chemical is very large. However, there are a limited number of structural patterns
More information3.2 Alkanes. Refining crude oil. N Goalby chemrevise.org 40 C 110 C 180 C. 250 C fuel oil 300 C 340 C. Fractional Distillation: Industrially
3.2 Alkanes Refining crude oil Fractional Distillation: Industrially Petroleum is a mixture consisting mainly of alkane hydrocarbons Petroleum fraction: mixture of hydrocarbons with a similar chain length
More informationStudent Achievement. Chemistry 12
Student Achievement Chemistry 12 Key Elements: Reaction Kinetics Estimated Time: 14 16 hours By the end of this course, students will be able to explain the significance of reaction rates, demonstrate
More information4.4. Revision Checklist: Chemical Changes
4.4. Revision Checklist: Chemical Changes Reactivity of metals When metals react with other substances the metal atoms form positive ions. The reactivity of a metal is related to its tendency to form positive
More informationCambridge International Examinations Cambridge International General Certificate of Secondary Education (9 1)
Cambridge International Examinations Cambridge International General Certificate of Secondary Education (9 1) *0123456789* CHEMISTRY 0971/03 Paper 3 Theory (Core) For Examination from 2018 SPECIMEN PAPER
More informationTHE UNITED REPUBLIC OF TANZANIA NATIONAL EXAMINATIONS COUNCIL CERTIFICATE OF SECONDARY EDUCATION EXAMINATION
THE UNITED REPUBLIC OF TANZANIA NATIONAL EXAMINATIONS COUNCIL CERTIFICATE OF SECONDARY EDUCATION EXAMINATION 032/1 CHEMISTRY 1 (For Both School and Private Candidates) TIME: 3 Hours Tuesday afternoon 09/10/2007
More informationSame theme covered in Combined but extra content Extra parts atomic symbols (first 20, Group 1 and Group 7)
Co-teaching document new ELC Science 5960 and Foundation Level GCSE Combined Science: Trilogy (8464) Chemistry: Component 3 Elements, mixtures and compounds ELC Outcomes Summary of content covered in ELC
More informationGCSE OCR Revision Chemistry. GCSE OCR Revision Chemistry. GCSE OCR Revision Chemistry. Bonding. GCSE OCR Revision Chemistry
Particle Model and Atomic Structure The following symbols describe two different substances. Deduce all the information you can from these symbols. 13 C 12 6 6 C 1 Particle Model and Atomic Structure The
More informationChapter 5: Chemical reactions Answers
Think about chemical reactions Chapter 5: Chemical reactions Answers What do plastic fruit juice containers, a toilet seat and a $100 note have in common? Why are some plastics harder than others? How
More informationLondon Examinations GCE
Centre No. Candidate No. Paper Reference(s) 7081/02 London Examinations GCE Chemistry Ordinary Level Paper 2 Monday 17 January 2011 Morning Time: 2 hours Materials required for examination Nil Paper Reference
More informationName AP CHEM / / Collected Essays Chapter 17
Name AP CHEM / / Collected Essays Chapter 17 1980 - #2 M(s) + Cu 2+ (aq) M 2+ (aq) + Cu(s) For the reaction above, E = 0.740 volt at 25 C. (a) Determine the standard electrode potential for the reaction
More informationELECTROCHEMISTRY OXIDATION-REDUCTION
ELECTROCHEMISTRY Electrochemistry involves the relationship between electrical energy and chemical energy. OXIDATION-REDUCTION REACTIONS SPONTANEOUS REACTIONS Can extract electrical energy from these.
More informationBLAKEHURST HIGH SCHOOL
BLAKEHURST HIGH SCHOOL YEAR 12 HALF YEARLY EXAM CHEMISTRY 2006 1½ HOURS NAME: Part A Total marks 10 Attempt Questions 1 10 Allow about 20 minutes for this part 1. The process of Steam Cracking can be written
More informationCHEMICAL REACTIONS & EQUATIONS
CHEMICAL REACTIONS & EQUATIONS PHYSICAL AND CHEMICAL CHANGE In our daily life many processes occur around us. Some of them do not lead to formation of any new substance, while others may lead to formation
More informationCHEMISTRY HIGHER LEVEL
L.34 PRE-LEAVING CERTIFICATE EXAMINATION, 2012 CHEMISTRY HIGHER LEVEL TIME : 3 HOURS 400 MARKS Answer eight questions in all. These must include at least two questions from Section A. All questions carry
More informationTHE UNITED REPUBLIC OF TANZANIA NATIONAL EXAMINATIONS COUNCIL CERTIFICATE OF SECONDARY EDUCATION EXAMINATION. Instructions
THE UNITED REPUBLIC OF TANZANIA NATIONAL EXAMINATIONS COUNCIL CERTIFICATE OF SECONDARY EDUCATION EXAMINATION 032/1 CHEMISTRY 1 (For Both School and Private Candidates) th TIME: 3 Hours Tuesday 7 October
More informationKENYA NATIONAL EXAMINATION COUNCIL REVISION MOCK EXAMS 2016 TOP NATIONAL SCHOOLS MANG U SCHOOL CHEMISTRY PAPER 2 TIME: 2 HOURS
KENYA NATIONAL EXAMINATION COUNCIL REVISION MOCK EXAMS 2016 TOP NATIONAL SCHOOLS MANG U SCHOOL CHEMISTRY PAPER 2 TIME: 2 HOURS SCHOOLS NET KENYA Osiligi House, Opposite KCB, Ground Floor Off Magadi Road,
More informationAcids, Bases & Salts
Introduction Acids, Bases & Salts Elements combine to form numerous compounds. On the basis of their chemical properties, compounds can be classified into three categories: Acids Bases Salts Acids and
More informationRemoval of suspended and dissolved organic solids
Removal of suspended and dissolved organic solids Types of dissolved solids The dissolved solids are of both organic and inorganic types. A number of methods have been investigated for the removal of inorganic
More informationPaper Atomic structure and the periodic table
Paper 1 4.1 Atomic structure and the periodic table 4.1.1 A simple model of the atom, symbols, relative atomic mass, electronic charge and isotopes Use the names and symbols of the first 20 elements in
More information# Ans Workings / Remarks
# Ans Workings / Remarks 1 B Atomic mass and temperature affects the rate of diffusion of gas. The lower the atomic mass, the lighter the substance. The higher the temperature, the higher the rate of collision
More informationChapter Objectives. Chapter 13 Electrochemistry. Corrosion. Chapter Objectives. Corrosion. Corrosion
Chapter Objectives Larry Brown Tom Holme Describe at least three types of corrosion and identify chemical reactions responsible for corrosion. www.cengage.com/chemistry/brown Chapter 13 Electrochemistry
More informationH Li. Mass Number. Number of Electrons Hydrogen He Draw diagrams to show the electronic structure of the elements above.
AQA Knowledge test Unit 1 Chemistry C1 C1.1 The fundamental Ideas in Chemistry C1.1.1 Atoms 1. What is an atom? 2. What is an element? 3. Match the name of the element with the symbol Element Oxygen Sodium
More informationElectrochemistry. Galvanic Cell. Page 1. Applications of Redox
Electrochemistry Applications of Redox Review Oxidation reduction reactions involve a transfer of electrons. OIL- RIG Oxidation Involves Loss Reduction Involves Gain LEO-GER Lose Electrons Oxidation Gain
More informationCHEMISTRY ELEMENTS, COMPOUNDS & MIXTURES
CHEMISTRY ELEMENTS, COMPOUNDS & MIXTURES Lesson Intentions In this lesson we will classify substances as Elements, Compounds, Mixtures Key Words 1. Compounds 2. Mixtures 3. Elementary 4. Symbols 5. Reaction
More informationElectrodes are normally made out of inert (unreactive) materials. Graphite and platinum are common electrode materials.
Electrolysis Electrolysis is using an electric current to break up an ionic compound to form elements. Covalent compounds can t be split up by electrolysis. Terms used in electrolysis: Electrolyte - the
More informationAnswer ALL questions. PART A (10 2 = 20 Marks) 3. State Clausius and Kelvin Statements of second law of thermodynamics.
Reg. No. Question Paper Code : 27653 B.E./B.Tech. DEGREE EXAMINATION, DECEMBER 2015/JANUARY 2016 First Semester Civil Engineering CY 6151 ENGINEERING CHEMISTRY I (Common to all branches except Marine Engineering)
More information4.4. Revision Checklist: Chemical Changes
4.4. Revision Checklist: Chemical Changes Reactivity of metals When metals react with other substances the metal atoms form positive ions. The reactivity of a metal is related to its tendency to form positive
More informationQuestion 1: What is meant by a pure substance? A pure substance is the one that consists of a single type of particles, i.e., all constituent particles of the substance have the same chemical nature. Pure
More informationModification of Alkanes by Cracking
Modification of Alkanes by Cracking Question Paper 3 Level A Level Subject Chemistry Exam Board AQA Module 3.3 Organic Chemistry Topic 3.3.2 Alkanes Sub-Topic 3.3.2.2 Modification of Alkanes by Cracking
More informationENVIRONMENTAL ENGINEERING. Chemical Engineering department
ENVIRONMENTAL ENGINEERING Chemical Engineering department WATER TREATMENT Many aquifers and isolated surface waters are of high water quality and may be pumped from the supply and transmission network
More informationRedox Reactions and Electrochemistry
Redox Reactions and Electrochemistry Redox Reactions and Electrochemistry Redox Reactions (19.1) Galvanic Cells (19.2) Standard Reduction Potentials (19.3) Thermodynamics of Redox Reactions (19.4) The
More informationOxidation-Reduction (Redox)
Oxidation-Reduction (Redox) Electrochemistry involves the study of the conversions between chemical and electrical energy. Voltaic (galvanic) cells use chemical reactions to produce an electric current.
More informationExperiment 18: Galvanic Cells
Chem 1B Dr. White 131 Experiment 18: Galvanic Cells Objectives Introduction To construct galvanic cells To learn how reduction potentials can be used to predict the relative reactivity of metals In a redox
More informationClassification of Matter
Matter in Chemistry Classification of Matter Elements: substances that are made from one type of atom only. Compounds: substances that are made from more than one type of atom chemically bonded together.
More informationSecondary School Mathematics & Science Competition Chemistry. Time allowed : 11:45 am - 1:00 pm (1hour 15 minutes) Total marks : 75
Secondary School Mathematics & Science Competition 2014 Chemistry Date : 11 th May 2014 Total no. of pages : 18 Time allowed : 11:45 am - 1:00 pm (1hour 15 minutes) Total marks : 75 1. Write your Candidate
More informationPractice I: Chemistry IGCSE
Practice I: Chemistry IGCSE cristian.obiol@gmail.com 1) Explain the following processes related to changes of states of matter. -Melting:... -Vaporization:... -Freezing:... -Condensation:... -Sublimation:...
More informationENGINEERING CHEMISTRY
ENGINEERING CHEMISTRY ENGINEERING CHEMISTRY [Strictly according to Latest Syllabus of B.Tech. Ist Year, Jawaharlal Nehru Technological University, Kakinada] By Dr B.N. Srinivas P. Kishore Ph.D. in Catalysis
More information5 Energy from chemicals
5 Energy from chemicals Content 5.1 Enthalpy 5.2 Hydrogen fuel cell Learning Outcomes Candidates should be able to: (a) (b) (c) (d) (e) describe the meaning of enthalpy change in terms of exothermic (H
More informationBridging the Gap between GCSE and A level Chemistry
Bridging the Gap between GCSE and A level Chemistry You should use your GCSE revision guide and your class notes to complete the following questions You can check your answers at the end of the power point,
More informationWrite down everything that the word equation tells you about the reaction (Total 4 marks)
Q1. Here is a word equation for a chemical reaction. copper oxide + sulphuric acid copper sulphate + water Write down everything that the word equation tells you about the reaction.......... (Total 4 marks)
More informationIGCSE Double Award Extended Coordinated Science
IGCSE Double Award Extended Coordinated Science Chemistry 5 - Electricity and Chemistry Electrolysis You need to know that electrolysis is: - The breakdown of ionic substances into their constituent elements
More informationUnit - 3 ELECTROCHEMISTRY VSA QUESTIONS (1 - MARK QUESTIONS) 3. Mention the purpose of salt-bridge placed between two half-cells of a galvanic cell?
Unit - 3 ELECTROCHEMISTRY 1. What is a galvanic cell? VSA QUESTIONS (1 - MARK QUESTIONS) 2. Give the cell representation for Daniell Cell. 3. Mention the purpose of salt-bridge placed between two half-cells
More informationIntroduction Oxidation/reduction reactions involve the exchange of an electron between chemical species.
Introduction Oxidation/reduction reactions involve the exchange of an electron between chemical species. The species that loses the electron is oxidized. The species that gains the electron is reduced.
More informationAppendix 1. Periodic Table and Atomic Structure. History of the idea of elements.
Appendix 1 Detailed list of additions and deletions This appendix provides a detailed list of additions and deletions compared with the former (1983) Leaving Certificate Chemistry syllabus. Completely
More informationAPPLIED SCIENCE Il (CHEMISTRY) (Common except DCP and CARM) (Maximum marks 50)
TED (10)- 1016B (REVISION -2010) RegNo. Signature SECONI) SEMESTER DIPLOMA EXAMINATION IN ENGINEERING! TECHNOLOGY --O CTOBER. 2014 APPLIED SCIENCE Il (CHEMISTRY) (Common except DCP and CARM) (Maximum marks
More informationfor sodium ion (Na + )
3.4 Unit 2 Chemistry 2 Throughout this unit candidates will be expected to write word equations for reactions specified. Higher tier candidates will also be expected to write and balance symbol equations
More informationOCR Chemistry Checklist
Topic 1. Particles Video: The Particle Model Describe the main features of the particle model in terms of states of matter. Explain in terms of the particle model the distinction between physical changes
More informationCAMBRIDGE INTERNATIONAL EXAMINATIONS General Certificate of Education Advanced Subsidiary Level and Advanced Level
Centre Number Candidate Number Name CAMBRIDGE INTERNATIONAL EXAMINATIONS General Certificate of Education Advanced Subsidiary Level and Advanced Level CHEMISTRY 9701/02 Paper 2 Structured Questions AS
More informationSBOA SCHOOL AND JUNIOR COLLEGE CHENNAI -101 Std IX CHEMISTRY ASSIGNMENT 1 1.Define Atom, Atomicity, Molecule,Ion, Atomic mass unit, Relative atomic
Std IX CHEMISTRY ASSIGNMENT 1 1.Define Atom, Atomicity, Molecule,Ion, Atomic mass unit, Relative atomic mass. 2.Give the postulates of Dalton s atomic theory of matter. 3.Give the symbols of the following
More information