*Correspondence to:

Size: px
Start display at page:

Download "*Correspondence to:"

Transcription

1 Supporting Information for Carbonate-promoted hydrogenation of carbon dioxide to multi-carbon carboxylates Aanindeeta Banerjee 1 and Matthew W. Kanan 1 * 1 Department of Chemistry, Stanford University, Stanford, California *Correspondence to: mkanan@stanford.edu Experimental methods Index Figure S1. Representative NMR spectra for CO 2 hydrogenation promoted by Cs 2 CO 3 Figure S2. Representative NMR spectra for CO 2 hydrogenation promoted by Cs 2 CO 3 seeded with (Cs + ) 2 oxalate Figure S3. Representative NMR spectra for CO 2 hydrogenation promoted by Cs 2 CO 3 seeded with Cs + acetate-2-13 C Figure S4. 1 H NMR spectra for thermal annealing of Rb + formate- 13 C and Rb + formate under CO 2 and H 2 O Figure S5. NMR spectra for CO 2 hydrogenation promoted by Rb 2 CO 3 seeded with (Rb + ) 2 oxalate- 13 C 2 and (Rb + ) 2 oxalate Figure S6. NMR spectra for thermal annealing of Na + acetate- 13 C 2 and Cs 2 CO 3 under CO 2 hydrogenation conditions and Na + acetate- 13 C 2 Figure S7. Representative 1 H NMR spectrum of liquid sample formed in background reaction Figure S8. Representative GC-FID chromatogram of the product gas mixture for CO 2 hydrogenation reaction promoted by Cs 2 CO 3 seeded with Cs + acetate-2-13 C Figure S9. Two-step procedure for selective synthesis of oxalate Table S1: Carbonate-promoted CO 2 hydrogenation data Table S2: Demonstration of volatility of acetic acid-2-13 C from a mixture of M + acetate-2-13 C and M 2 CO 3 under CO 2 hydrogenation conditions page S2-S7 S8 S9 S10 S11 S12 S13 S14 S15 S16 S17 S18 S1

2 Experimental Methods Materials Cesium carbonate (99.995%, trace metal basis), cesium oxalate ( 99.9%, trace metal basis), oxalic acid (98%), phosphoric acid solution (85 wt. % in water) and 2-ethybutyric acid (99%) were purchased from Sigma Aldrich; rubidium carbonate (99.8+%) was purchased from Strem Chemicals; potassium carbonate (99.8%), sodium L-(+)-tartrate dihydrate (99.7%), HPLC grade water, HPLC grade acetonitrile and potassium phosphate monobasic ( 99%) were purchased from Fisher Scientific; carbon dioxide (99.99%) and hydrogen (99.998%) was purchased from Praxair; acetic acid-d 4 (99.5%), acetic acid-2-13 C (99%), formic acid-d 2 (98%) (<5% D 2 O), formic acid- 13 C (99%) (<5% H 2 O) and oxalic acid- 13 C 2 (99%) were purchased from Cambridge Isotope Laboratories. Chemicals were used as received without further purification. Instruments and analysis Experiments under pressurized CO 2, H 2 or N 2 were performed in a stainless steel 300 ml high-temperature, high-pressure Parr reactor (model 4561-HT-FG-SS-115-VS ). The temperatures reported in the manuscript have been recorded by a J-type thermocouple height-adjusted by Parr such that the tip lies just above the reactor floor. The gaseous products were analyzed using a gas chromatograph (SRI Instruments) equipped with packed MoleSieve 5A column and a packed HaySep D column. Argon ( %) was used as carrier gas. A flame ionization detector (FID) with a methanizer was used to quantify CO, CH 4, C 2 H 4 and C 2 H 6 and a thermal conductivity detector (TCD) was used to quantify H 2. 1 H NMR and 13 C NMR spectra were recorded at 23 C on a Varian Unity Inova 600 MHz spectrometer, Varian Unity Inova 500 MHz spectrometer, Varian Direct Drive 400 MHz spectrometer, Varian Mercury 400 MHz spectrometer, or Varian Unity Inova 300 MHz spectrometer. 1 H chemical shifts (δ) are reported in parts per million (ppm) downfield from tetramethylsilane and referenced to residual protium in the NMR solvent (D 2 O, δ = 4.79). 13 C chemical shifts (δ) are reported in ppm downfield from tetramethylsilane. Quantitative 13 C NMR was performed to quantify the amount of oxalate using cesium 2-ethylbutyrate as the internal standard. Spectra were obtained using a 90-degree pulses with a 30 sec delay time, keeping the decoupler off during delay time. The oxalate concentration was determined by comparing its peak area with that of the methyl peak of the internal standard. Oxalate yields were also independently measured using an Agilent 1200 HPLC equipped with diode array detector and Agilent Eclipse XDB-C18 reverse phase column. The HPLC samples were prepared by diluting an aliquot of the D 2 O solution of crude product mixture with freshly prepared 1N H 2 SO 4. Analysis was done at 40 C using 10 % CH 3 CN and 90 % 50 mm phosphate buffer (ph 2.1) as the mobile phase at flow rate of 1 ml min 1. The peak areas were calculated using Agilent OpenLAB CDS Chemstation HPLC software. The oxalate concentration measured by HPLC was found to be consistent with the 13 C NMR analysis. Safety Statement No unexpected or unusually high safety hazards were encountered. Cs 2 CO 3 promoted CO 2 hydrogenation at 230 C An oven-dried glass liner containing Cs 2 CO 3 (3.26 g, 10.0 mmol) was sealed in the Parr reactor. The reactor was heated to 300 C under a stream of N 2 with evacuation after every 15 min. After 3 h at 300 C, the reactor was cooled to room temperature and kept under vacuum overnight. It was then filled with 8 bar CO 2 followed by 8 bar H 2, and heated to 230 C. After 4 h at 230 C, the reactor was cooled to ambient temperature. The gaseous products of the reaction were quantified by gas chromatography (GC) using the following procedure. The Parr was vented to 1.2 bar and then diluted to 10 bar with N 2. Approximately 1.5 S2

3 bar was vented to clear the gas lines and then the Parr was connected to the sampling loop of the GC via a mass flow controller. The gas mixture was flowed (at 5 sccm) for 10 min to equilibrate the lines before recording. A GC run was initiated every 35 min. The concentrations of the gaseous products were quantified by comparing the ratio of the GC peak areas of the sample (average of 3 runs) with that of a standard. After collecting the GC data, the reactor was vented to ambient pressure and disassembled. The crude solid products were dissolved in D 2 O, filtered through a 0.2 µm PTFE syringe filter and analyzed by 1 H NMR and 13 C NMR. The amount of formate was quantified from 1 H NMR of the D 2 O solution using sodium L- (+)-tartrate dehydrate as an internal standard. The same experiment was performed in presence of added water. A glass liner containing Cs 2 CO 3 (3.26 g, 10.0 mmol) and 1.1 ml of deionized H 2 O was sealed in the Parr reactor. The reactor was flushed with CO 2 several times before being filled with 8 bar CO 2 and 8 bar H 2. It was heated to 230 C, maintained at that temperature for a 4 h, and then cooled to ambient temperature. The gaseous products of the reaction were quantified by GC and the solid products were quantified by 1 H NMR and 13 C NMR as described above. M 2 CO 3 promoted CO 2 hydrogenation 300 C Two mmol of M 2 CO 3 (M=Cs/Rb/K) was weighed out into a glass liner for the Parr reactor, dissolved in minimum amount of deionized water, and evaporated to dryness by heating on a hot plate at 150 C for at least 2 h. The liner was then sealed inside the Parr reactor. The reactor was evacuated and backfilled with CO 2 three times. It was then filled with CO 2 followed by H 2 at ambient temperature at appropriate pressures to attain the target pressures at the reaction temperature (e.g. 16 bar CO 2 and 16 bar H 2 at ambient temperature to reach 30 bar CO 2 and 30 bar H 2 at 320 C). The reactor was heated to the desired temperature, maintained at that temperature for a given period of time, and then cooled to ambient temperature. The approximate time taken for temperature ramp from ambient temperature to 320 C is 1h 15 min, of which the ramp from 300 to 320 C is ~20 min. The gaseous products of the reaction were quantified by GC using the procedure described above. The reactor was then vented and disassembled. Because water formed by RWGS condenses in the liner, the liner contained an aqueous solution upon disassembling the reactor. This aqueous solution was evaporated to dryness to afford the crude solid products, which were dissolved in D 2 O, filtered through a 0.2 µm PTFE syringe filter and analyzed by 1 H NMR and 13 C NMR. The amount of formate, acetate, propionate and succinate formed were quantified from 1 H NMR of the D 2 O solution using sodium L-(+)-tartrate dehydrate as an internal standard. Quantitative 13 C NMR was performed to quantify the amount of oxalate using cesium 2-ethylbutyrate as the internal standard. Representative spectra and data are shown in Figure S1 and Table S1. CO 2 hydrogenation promoted by M 2 CO 3 seeded with (M + ) 2 oxalate In a Parr liner, an appropriate amount of M 2 CO 3 and oxalic acid were dissolved in minimum amount of deionized water. The solution was evaporated to dryness on a hot plate at 150 C for 2 4 h such that the final mixture consisted of 2 mmol of M 2 CO 3 and the desired amount of (M + ) 2 oxalate. The liner was sealed in the Parr reactor and the reactor was evacuated and backfilled with CO 2 three times. It was then filled with 16 bar CO 2 followed by 16 bar H 2, at ambient temperature. It was heated to 320 C, maintained at that temperature for 8 h, and then cooled to ambient temperature. The gaseous products were analyzed by GC and the solid products were analyzed by 1 H NMR and 13 C NMR as described above. Representative spectra and data are shown in Figure S2 and Table S1. CO 2 hydrogenation promoted by M 2 CO 3 seeded with M + acetate-2-13 C In a Parr liner, an appropriate amount of M 2 CO 3 and acetic acid-2-13 C were dissolved in a minimum amount of deionized water. The solution was evaporated to dryness on a hot plate at 150 C for 2 4 h such that the final mixture consisted of 2 mmol of M 2 CO 3 and the desired amount of M + acetate-2-13 C. The liner was sealed in the Parr reactor and the reactor was evacuated and backfilled with CO 2 three times. It was filled S3

4 with 16 bar CO 2 followed by 16 bar H 2, at ambient temperature. It was heated to 320 C, maintained at that temperature for 8 h, and then cooled to ambient temperature. The gaseous products were analyzed by GC and the solid products were analyzed by 1 H NMR and 13 C NMR as described above. Representative spectra and data are shown in Figure 3c, Figure S3 and Table S1. H/D isotope exchange between acetate-d 3 and H 2 In a 20 ml septum capped glass vial, acetic acid-d 4 (28.7 µl, 0.5 mmol) and Cs 2 CO 3 (163 mg, 0.5 mmol) were dissolved in 0.5 ml of D 2 O. The septum-capped vial was placed in an aluminum block and the D 2 O was removed in vacuo using a Schlenk line at 150 C for 2 h to form a solid that consisted of cesium acetated 3 and 0.5 equivalents of Cs 2 CO 3. The vial was placed inside the Parr reactor, which was then dried by heating at 150 C under a stream of N 2 while keeping its gas release valve open. After 12 h, the reactor was heated to 230 C under 2.5 bar of H 2 for 1 h. After cooling to room temperature, the crude product was dissolved in D 2 O, filtered through a 0.2 µm PTFE syringe filter and analyzed by NMR. >99% exchange was observed by 1 H NMR. 1 H spectra of the reactant mixture and the product mixture are shown in Figure 2b. To test if the proton source for the above experiment is from adventitious moisture, a control experiment was performed where a mixture of 0.5 mmol cesium acetate-d 3 and 0.5 equivalents of Cs 2 CO 3, prepared in the same way as described above, was heated at 230 C under 2.5 bar of N 2 for 1 h. 1 H NMR analysis of the solid products indicated 20% exchange, which indicates that exchange with adventitious moisture contributes a minor portion of the protonation of acetate-d 3. A second control experiment was performed to test whether Cs 2 CO 3 is necessary for isotopic scrambling. In a 20 ml septum capped glass vial, acetic acid-d 4 (28.7 µl, 0.5 mmol) and Cs 2 CO 3 (75 mg, 0.23 mmol) were dissolved in 0.5 ml of D 2 O and evaporated as described above to form cesium acetate-d 3. The mixture was heated in the Parr reactor under N 2 stream overnight at 150 C followed by at 230 C under 2.5 bar of H 2 for 1 h. After cooling to room temperature, the crude product was dissolved in D 2 O, filtered through a 0.2 µm PTFE syringe filter and analyzed by NMR. 80% exchange was observed, which indicates that acetate is a competent base to mediate its own H/D exchange with H 2. H/D isotope exchange between formate-d and H 2 In a 20 ml vial, formic acid-d 2 (18.9 µl, 0.5 mmol) and Cs 2 CO 3 (163, 0.5 mmol) were dissolved in minimum amount of D 2 O. The septum-capped vial was kept under vacuum for 1 h at 200 C before transferring to the Parr reactor. The reactor was sealed and maintained at 200 C under a stream of N 2 overnight to further dry the reactants and the reactor. This mixture comprising of 0.5 mmol cesium formate-d and 0.5 equiv. Cs 2 CO 3, was heated to 250 C under 2.5 bar of H 2 for 1 h. After cooling to room temperature, the crude product was dissolved in D 2 O, filtered through a 0.2 µm PTFE syringe filter and analyzed by NMR. 22 % H/D exchange was observed by 1 H NMR. (Figure 2a). To confirm that protonation of cesium formate-d observed in the above experiment arises from H 2 instead of adventitious moisture, a dry mixture of 0.5 mmol cesium formate-d and 0.5 equiv. Cs 2 CO 3 was prepared in the same way as described above. The mixture was heated first under N 2 at 200 C for 12 h and then at 250 C under H 2 for 1 h. Less than 1 % H/D exchange was observed in this case. Another control experiment was performed to test whether Cs 2 CO 3 is necessary for isotopic scrambling between formate-d and H 2. Formic acid-d 2 (18.9 µl, 0.5 mmol) and Cs 2 CO 3 (75 mg, 0.23 mmol) were dissolved in minimum amount of D 2 O and evaporated to form cesium formate-d. After drying the vial in the reactor at 200 C overnight, it was heated to 250 C under 2.5 bar of N 2 for 1 h. After cooling to room S4

5 temperature, the crude product was dissolved in D 2 O, filtered through a 0.2 µm PTFE syringe filter and analyzed by NMR. 5.8 % H/D exchange was observed by 1 H NMR. H/D isotope exchange between acetate-d 3 and propionate In a 40 ml septum capped glass vial, acetic acid-d 4 (28.7 µl, 0.5 mmol), propionic acid (37.4 µl, 0.5 mmol) and Cs 2 CO 3 (325.8 mg, 1 mmol) were dissolved in 0.5 ml of D 2 O. The septum-capped vial was placed in an aluminum block and the D 2 O was removed in vacuo using a Schlenk line at 150 C for 1 h to form a solid that consists of cesium acetate-d 3, cesium propionate and 0.5 equivalents of Cs 2 CO 3. Next, the vial was heated to 320 C for 0.5 h under N 2 atmosphere. After cooling to room temperature, the crude product was dissolved in D 2 O, filtered through a 0.2 µm PTFE syringe filter and analyzed by 1 H NMR. Complete H/D exchange was observed between acetate-d 3 and the 2 position of propionate, but no deuteration was observed in the 3 position of propionate. 1 H spectra of the reactant mixture and the product mixture are shown in Figure 2c. Annealing Rb + formate- 13 C under CO 2 and H 2 O vapor A 20 ml vial was charged with Rb 2 CO 3 (289 mg, 1.25 mmol) and formic acid- 13 C (18.9 µl, 0.5 mmol). The solid was dissolved in minimum amount of deionized water and evaporated to dryness by heating on a hot plate at 150 C for at least 2 h. The vial was then sealed inside the Parr reactor with 0.8 ml water pipetted on the base of the reactor. The Parr was evacuated and backfilled with CO 2 three times and then filled to 16 bar. It was then heated to 295 C for 1 h, then cooled to ambient temperature, vented and disassembled. The crude reaction mixture, in the vial, was evaporated to dryness, dissolved in D 2 O, filtered through a 0.2 µm PTFE syringe filter and analyzed by 1 H NMR and 13 C NMR. The spectra are shown in Figure 3a and S4a. The amounts of 13 C at the 1 and 2 positions of acetate were quantified by integration of the 13 C satellite peaks in the 1 H NMR spectrum. To confirm that the 13 C-enrichment in acetate originated from formate- 13 C, a control experiment was performed with Rb 2 CO 3 (289 mg, 1.25 mmol) and unlabeled formic acid (18.9 µl, 0.5 mmol) under the same conditions. In this case, 105 µmol formate and 3 µmol acetate were observed by 1 H NMR with no isotopic enrichment (Figure S4b). CO 2 hydrogenation promoted by Rb 2 CO 3 seeded with Rb + oxalate- 13 C 2. Rb 2 CO 3 (578 mg, 1.25 mmol) and oxalic acid- 13 C 2 (46 mg, 0.5 mmol) were weighed out into a glass liner for the Parr reactor, dissolved in minimum amount of deionized water, and evaporated to dryness by heating on a hot plate at 150 C for at least 2 h. The liner was then sealed inside the Parr reactor. The reactor was evacuated and backfilled with CO 2 three times, then filled with 16 bar CO 2 followed by 16 bar H 2 at ambient temperature. The reactor was heated to 320 C, maintained at this temperature for 15 min, then cooled to ambient temperature, vented and disassembled. The crude reaction mixture in the liner was evaporated to dryness, dissolved in D 2 O, filtered through a 0.2 µm PTFE syringe filter and analyzed by 1 H NMR and 13 C NMR (Figure 3b and S5). Annealing Na + acetate- 13 C 2 under CO 2 hydrogenation conditions. Cs 2 CO 3 (326 mg, 1.0 mmol) and sodium acetate- 13 C 2 (19.3 mg, 0.23 mmol) were weighed out into a 20 ml glass vial, dissolved in minimum amount of deionized water and evaporated to dryness by heating on a hot plate at 150 C for at least 2 h. The vial was then sealed inside the Parr reactor. The reactor was evacuated and backfilled with CO 2 three times. It was filled with 16 bar CO 2, followed by 16 bar H 2 at ambient temperature and heated to 320 C. Right when the temperature reached 320 C, the reactor was cooled to ambient temperature, vented and disassembled. The crude reaction mixture in the liner was evaporated to dryness, dissolved in D 2 O, filtered through a 0.2 µm PTFE syringe filter and analyzed by 1 H NMR (Figure S6). 166 µmol of acetate-2-13 C and 59 µmol of malonate-2-13 C was observed along with trace amount of S5

6 formate and acetate. No 13 C enrichment was noticed at the 1 position of acetate or malonate, indicating its rapid exchange with unlabelled CO 2. Selective formation of oxalate A 20 ml vial charged with Cs 2 CO 3 (326 mg, 1.0 mmol) was sealed inside the Parr reactor. The reactor was evacuated and backfilled with CO 2 three times, then filled with 16 bar CO 2 followed by 16 bar H 2 at ambient temperature. The reactor was heated to 320 C and maintained at that temperature for 2 h. The reactor was then cooled to 200 C and the gas mixture was vented while starting to flow in N 2. The reactor was kept at 200 C for 1.5 h under N 2 stream to remove water and regenerate CO 3 2 from HCO 3 formed in the first step. The reactor was then cooled to room temperature, filled with 30 bar CO 2, and reheated to 320 C. After 2 h, it was then cooled down, vented, and disassembled. The crude product was analyzed by HPLC. (Figure S9) Annealing Cs 2 CO 3 with CO and CO 2 An oven dried 20 ml vial charged with dry Cs 2 CO 3 (325.8 mg, 1.00 mmol) was sealed in the dry Parr reactor. The reactor was evacuated and backfilled with CO three times. It was then filled with 2.1 bar CO followed by 16.3 bar CO 2 at ambient temperature. The reactor was heated to 340 C, maintained at that temperature for 2 h, then cooled to ambient temperature, vented and disassembled. The crude product was dissolved in D 2 O, filtered through a 0.2 µm PTFE syringe filter and analyzed by 1 H NMR and HPLC. No formate or oxalate was observed. Background CO 2 hydrogenation An oven-dried glass liner was sealed in the Parr reactor. The reactor was evacuated and backfilled with CO 2 three times, then filled with 16 bar CO 2 followed by 16 bar H 2 at ambient temperature. The reactor was heated to 320 C, maintained at that temperature for 8 h, and then cooled to ambient temperature. GC analysis of the headspace indicated the formation of 52 mmol CO, 8 mmol methane, 20 µmol ethylene and 350 µmol ethane. The reactor was then vented and disassembled. The liquid condensed on the cooling loop was washed down in the liner with 0.5 ml D 2 O. Sodium L-(+)-tartrate dehydrate was added as the internal standard and the solution was analyzed by 1 H NMR after filtering through a 0.2 µm PTFE syringe filter. The spectrum was collected by suppressing the proton peak of water, which is the main product (from RWGS), using a presaturation method. 1 µmol formic acid, 4 µmol acetic acid, 12 µmol methanol and 5 µmol ethanol was observed. A representative spectrum is shown in Figure S7. Demonstration of volatility of acetic acid-2-13 C from a mixture of M + acetate-2-13 C and M 2 CO 3, under CO 2 hydrogenation reaction condition In a 20 ml vial, 1.25 mmol of M 2 CO 3 (Cs + or Rb + ) and 0.5 mmol acetic acid-2-13 C were dissolved in a minimum amount of deionized water. The solution was evaporated to dryness on a hot plate at 150 C for at least 2 h such that the final mixture consisted of 1 mmol of M 2 CO 3 and 0.5 mmol of M + acetate-2-13 C. Separately, 2 mmol of M 2 CO 3, meant to serve as the trap for volatile acetic acid-2-13 C, was deposited on a Parr liner by evaporating an aqueous solution to dryness. Next, the upright vial was placed inside the liner and it was sealed in the Parr reactor. The reactor was evacuated and backfilled with CO 2 three times, then filled with 16 bar CO 2 followed by 16 bar H 2 at ambient temperature. The reactor was heated to 320 C, maintained at that temperature for 1-2 h, then cooled to ambient temperature, vented and disassembled. The crude products in the vial and the liner were seperately dried, dissolved in D 2 O, filtered through a 0.2 µm PTFE syringe filter and analyzed by 1 H NMR to determine the final distribution of M + acetate-2-13 C. Representative data are shown in Table S2. S6

7 Annealing Cs 2 CO 3 under H 2 Two mmol of Cs 2 CO 3 (651 mg, 2.0 mmol ) was weighed out into a glass liner for the Parr reactor, dissolved in minimum amount of deionized water, and evaporated to dryness by heating on a hot plate at 150 C for at least 2 h. The liner was then sealed, at room temperature, inside the Parr reactor which had been previously dried by heating at 320 C for 3 h under a stream of N 2 while keeping its gas release valve open. The reactor was evacuated and backfilled with H 2 three times. It was filled with 16 bar H 2 and heated to 320 C, maintained at that temperature for 2 h, and then cooled to ambient temperature. No gaseous products were observed on GC analysis of the reactor headspace, using the procedure described above. The reactor was then vented and disassembled. The crude solid was dissolved in D 2 O and filtered through a 0.2 µm PTFE syringe filter. No products were observed by 1 H NMR and 13 C NMR. Annealing Cs 2 CO 3 under CO 2 Two mmol of Cs 2 CO 3 (652 mg, 2.0 mmol ) was weighed out into a glass liner for the Parr reactor, dissolved in minimum amount of deionized water, and evaporated to dryness by heating on a hot plate at 150 C for at least 2 h. The liner was then sealed, at room temperature, inside the Parr reactor which had been previously dried by heating at 320 C for 3 h under a stream of N 2 while keeping its gas release valve open. The reactor was evacuated and backfilled with CO 2 three times. It was filled with 16 bar CO 2 and heated to 320 C, maintained at that temperature for 2 h, and then cooled to ambient temperature. No gaseous products were observed on GC analysis of the reactor headspace, using the procedure described above. The reactor was then vented and disassembled. The crude solid was dissolved in D 2 O and filtered through a 0.2 µm PTFE syringe filter. No products were observed by 1 H NMR and 13 C NMR. Annealing Cs 2 CO 3 in presence of CO and H 2 Two mmol of Cs 2 CO 3 (651 mg, 2.0 mmol ) was weighed out into a glass liner for the Parr reactor, dissolved in minimum amount of deionized water, and evaporated to dryness by heating on a hot plate at 150 C for at least 2 h. The liner was then sealed, at room temperature, inside the Parr reactor which had been previously dried by heating at 320 C for 3 h under a stream of N 2 while keeping its gas release valve open. The reactor was evacuated and filled with 8 bar CO and 16 bar H 2, at ambient temperature. It was heated to 320 C, maintained at that temperature for 2 h, and then cooled to ambient temperature. GC analysis of the headspace was done using the procedure described above. The gaseous products were composed of 23 mmol methane, 37 µmol ethylene, 2.5 mmol ethane and approximately 45 mmol CO 2. (CO 2 is formed from WGS as the water formed from methanation reacts with CO). The solid products, analyzed by 1 H NMR and 13 C NMR as described above, comprised of 2.6 mmol formate, 273 µmol oxalate, 9 µmol acetate, 9 µmol of propionate and 10 µmol of succinate. S7

8 a) b) Figure S1: a) 1 H NMR (500 MHz) and b) 13 C NMR (125 MHz) in D 2 O of the crude product mixture after reaction of 2 mmol of Cs 2 CO 3 under 60 bar of 1:1 CO 2 :H 2 at 320 C for 2 h. S8

9 a) b) Figure S2: a) 1 H NMR (600 MHz) and b) 13 C NMR (125 MHz) in D 2 O of the crude product mixture after reaction of 2 mmol of Cs 2 CO 3 seeded with 75 µmol of (Cs + ) 2 oxalate under 60 bar of 1:1 CO 2 :H 2 at 320 C for 8 h. S9

10 a) b) Figure S3: a) 1 H NMR (600 MHz) and b) 13 C NMR (125 MHz) in D 2 O of the crude product mixture after reaction of 2 mmol of Cs 2 CO 3 seeded with 0.5 mmol of Cs + acetate-2-13 C under 60 bar of 1:1 CO 2 :H 2 at 320 C for 8 h. S10

11 a) b) Figure S4: a) 1 H NMR (500 MHz) in D 2 O of the crude product mixture after reaction of 1 mmol of Rb 2 CO 3 and 0.5 mmol of Rb + formate- 13 C and b) 1H NMR (600 MHz) in D 2 O of the crude product mixture after reaction of 1 mmol of Rb 2 CO 3 and 0.5 mmol of Rb + formate under 30 bar CO 2 and 3 bar H 2 O at 295 C for 1 h. S11

12 a) b) Figure S5: a) 1 H NMR (500 MHz) and b) 13 C NMR (125 MHz) in D 2 O of the crude product mixture after reaction of 1.5 mmol of Rb 2 CO 3 and 0.5 mmol of (Rb + ) 2 oxalate- 13 C 2 under 60 bar of 1:1 CO 2 :H 2 at 320 C for 15 min. Integrations for overlapping peaks have been calculated by peak fitting. S12

13 a) b) Figure S6: a) 1 H NMR (500 MHz) in D 2 O of a mixture of 0.23 mmol of Na + acetate- 13 C 2 and 1 mmol of Cs 2 CO 3 after heating to 320 C under 60 bar of 1:1 CO 2 :H 2 and then cooling to ambient temperature. b) 1 H NMR spectrum of the Na + acetate- 13 C 2 starting material. S13

14 Figure S7: 1 H NMR (500 MHz) of the liquid sample collected after background reaction performed under 60 bar of 1:1 CO 2 :H 2 at 320 C for 8 h. S14

15 Figure S8: GC-FID chromatogram of the product gas mixture after CO 2 hydrogenation reaction promoted by 2 mmol Cs 2 CO 3 seeded with 50 µmol Cs + acetate-2-13 C under 60 bar of 1:1 CO 2 :H 2 at 320 C for 8 h. S15

16 Figure S9: A two-step procedure for selective formation of oxalate by carbonate-promoted CO 2 hydrogenation followed by C H carboxylation of formate. S16

17 Table S1: Carbonate promoted CO 2 hydrogenation data All reactions have been performed under total pressure of 60 bar. * Yields within reactor background limit. S17

18 Table S2: Demonstration of volatility of acetic acid-2-13 C from a mixture of M + acetate-2-13 C and M 2 CO 3 performed under 60 bar of 1:1 CO 2 :H 2 at 320 C S18

Selective Formation of Benzo[c]cinnoline by Photocatalytic Reduction of 2,2 Dinitrobiphenyl with TiO 2 and UV light irradiation

Selective Formation of Benzo[c]cinnoline by Photocatalytic Reduction of 2,2 Dinitrobiphenyl with TiO 2 and UV light irradiation Electronic Supplementary Material (ESI) for Chemical Communications. This journal is The Royal Society of Chemistry 2015 Content: Selective Formation of Benzo[c]cinnoline by Photocatalytic Reduction of

More information

Supporting Information

Supporting Information Supporting Information Z-Selective Homodimerization of Terminal Olefins with a Ruthenium Metathesis Catalyst Benjamin K. Keitz, Koji Endo, Myles B. Herbert, Robert H. Grubbs* Arnold and Mabel Beckman Laboratories

More information

Supporting Information

Supporting Information Supporting Information A Teflon microreactor with integrated piezoelectric actuator to handle solid forming reactions Simon Kuhn, a Timothy oёl, b Lei Gu, a Patrick L. eider a and Klavs F. Jensen a* a

More information

[(NHC)Au I ]-Catalyzed Acid Free Hydration of Alkynes at Part-Per-Million Catalyst Loadings

[(NHC)Au I ]-Catalyzed Acid Free Hydration of Alkynes at Part-Per-Million Catalyst Loadings SUPPORTING INFORMATION [(NHC)Au I ]-Catalyzed Acid Free Hydration of Alkynes at Part-Per-Million Catalyst Loadings Nicolas Marion, Rubén S. Ramón, and Steven P. Nolan Institute of Chemical Research of

More information

Supporting Text Synthesis of (2 S ,3 S )-2,3-bis(3-bromophenoxy)butane (3). Synthesis of (2 S ,3 S

Supporting Text Synthesis of (2 S ,3 S )-2,3-bis(3-bromophenoxy)butane (3). Synthesis of (2 S ,3 S Supporting Text Synthesis of (2S,3S)-2,3-bis(3-bromophenoxy)butane (3). Under N 2 atmosphere and at room temperature, a mixture of 3-bromophenol (0.746 g, 4.3 mmol) and Cs 2 C 3 (2.81 g, 8.6 mmol) in DMS

More information

Kinetics experiments were carried out at ambient temperature (24 o -26 o C) on a 250 MHz Bruker

Kinetics experiments were carried out at ambient temperature (24 o -26 o C) on a 250 MHz Bruker Experimental Materials and Methods. All 31 P NMR and 1 H NMR spectra were recorded on 250 MHz Bruker or DRX 500 MHz instruments. All 31 P NMR spectra were acquired using broadband gated decoupling. 31

More information

Supporting Information

Supporting Information Supporting Information Copyright Wiley-VCH Verlag GmbH & Co. KGaA, 69451 Weinheim, 2012 Subcellular Localization and Activity of Gambogic Acid Gianni Guizzunti,* [b] Ayse Batova, [a] Oraphin Chantarasriwong,

More information

Supporting Information

Supporting Information Supporting Information Wiley-VCH 2012 69451 Weinheim, Germany Hydrogenation of Carbon Dioxide to Methanol by Using a Homogeneous Ruthenium Phosphine Catalyst** Sebastian Wesselbaum, Thorsten vom Stein,

More information

A General and Mild Copper-Catalyzed Arylation of Diethyl Malonate

A General and Mild Copper-Catalyzed Arylation of Diethyl Malonate A General and Mild Copper-Catalyzed Arylation of Diethyl Malonate 1 Edward J. Hennessy and Stephen L. Buchwald Department of Chemistry, Massachusetts Institute of Technology, Cambridge, MA 02139 Supporting

More information

Supporting Information

Supporting Information Electronic Supplementary Material (ESI) for Green Chemistry. This journal is The Royal Society of Chemistry Supporting Information General Remarks Most of chemicals were purchased from Sigma-Aldrich, Strem,

More information

Stoichiometric Reductions of Alkyl-Substituted Ketones and Aldehydes to Borinic Esters Lauren E. Longobardi, Connie Tang, and Douglas W.

Stoichiometric Reductions of Alkyl-Substituted Ketones and Aldehydes to Borinic Esters Lauren E. Longobardi, Connie Tang, and Douglas W. Electronic Supplementary Material (ESI) for Dalton Transactions. This journal is The Royal Society of Chemistry 2014 Supplementary Data for: Stoichiometric Reductions of Alkyl-Substituted Ketones and Aldehydes

More information

Ionic liquid-supported Pt nanoparticles as catalysts for enantioselective hydrogenation

Ionic liquid-supported Pt nanoparticles as catalysts for enantioselective hydrogenation Supporting information Ionic liquid-supported Pt nanoparticles as catalysts for enantioselective hydrogenation Matthias Josef Beier, Jean-Michel Andanson, Tamas Mallat, Frank Krumeich and Alfons Baiker*

More information

Selective Dimerization of Ethylene to 1-Butene with a Porous Catalyst

Selective Dimerization of Ethylene to 1-Butene with a Porous Catalyst Supporting Information Selective Dimerization of Ethylene to 1-Butene with a Porous Catalyst Eric D. Metzger, Carl K. Brozek, Robert J. Comito, and Mircea Dincă* Department of Chemistry, Massachusetts

More information

Supporting Material. 2-Oxo-tetrahydro-1,8-naphthyridine-Based Protein Farnesyltransferase Inhibitors as Antimalarials

Supporting Material. 2-Oxo-tetrahydro-1,8-naphthyridine-Based Protein Farnesyltransferase Inhibitors as Antimalarials Supporting Material 2-Oxo-tetrahydro-1,8-naphthyridine-Based Protein Farnesyltransferase Inhibitors as Antimalarials Srinivas Olepu a, Praveen Kumar Suryadevara a, Kasey Rivas b, Christophe L. M. J. Verlinde

More information

Supporting Information for

Supporting Information for Supporting Information for Chelated Ruthenium Catalysts for Z-Selective Olefin Metathesis Koji Endo and Robert H. Grubbs* Arnold and Mabel Beckman Laboratory of Chemical Synthesis, Division of Chemistry

More information

Ondansetron Hydrochloride Tablets

Ondansetron Hydrochloride Tablets Ondansetron Hydrochloride Tablets Dissolution Perform the test with 1 tablet of Ondansetron Hydrochloride Tablets at 50 revolutions per minute according to the Paddle method, using 900 ml of water

More information

4023 Synthesis of cyclopentanone-2-carboxylic acid ethyl ester from adipic acid diethyl ester

4023 Synthesis of cyclopentanone-2-carboxylic acid ethyl ester from adipic acid diethyl ester NP 4023 Synthesis of cyclopentanone-2-carboxylic acid ethyl ester from adipic acid diethyl ester NaEt C 10 H 18 4 Na C 2 H 6 C 8 H 12 3 (202.2) (23.0) (46.1) (156.2) Classification Reaction types and substance

More information

ChemComm. Supplementary Information. RSCPublishing

ChemComm. Supplementary Information. RSCPublishing ChemComm RSCPublishing Supplementary Information Negishi coupling reactions as a valuable tool for [ 11 C]methyl-arene formation; first proof of principle S. Kealey, a J. Passchier, b M. Huiban b 1. Experimental

More information

A biphasic oxidation of alcohols to aldehydes and ketones using a simplified packed-bed microreactor

A biphasic oxidation of alcohols to aldehydes and ketones using a simplified packed-bed microreactor A biphasic oxidation of alcohols to aldehydes and ketones using a simplified packed-bed microreactor Andrew Bogdan 1 and D. Tyler McQuade 2, * Address: 1 Department of Chemistry and Chemical Biology, Cornell

More information

Supporting Information

Supporting Information Electronic Supplementary Material (ESI) for CrystEngComm. This journal is The Royal Society of Chemistry 2018 Supporting Information 2-Methylimidazole-Assisted Synthesis of Two-Dimensional MOF-5 Catalyst

More information

Supplementary Material. Direct methane conversion to methanol by ionic liquids dissolved platinum catalysts

Supplementary Material. Direct methane conversion to methanol by ionic liquids dissolved platinum catalysts Supplementary Material Direct methane conversion to methanol by ionic liquids dissolved platinum catalysts Jihong Cheng, Zaiwei Li, Mark Haught, Yongchun Tang * Power, Environmental, and Energy Research

More information

Bulk ring-opening transesterification polymerization of the renewable δ-decalactone using

Bulk ring-opening transesterification polymerization of the renewable δ-decalactone using Bulk ring-opening transesterification polymerization of the renewable δ-decalactone using an organocatalyst Mark T. Martello, Adam Burns, and Marc Hillmyer* *Department of Chemistry, University of Minnesota,

More information

Confined Rhodium catalyst by self-assembly for asymmetric hydroformylation of unfunctionalized, internal alkenes.

Confined Rhodium catalyst by self-assembly for asymmetric hydroformylation of unfunctionalized, internal alkenes. Confined Rhodium catalyst by self-assembly for asymmetric hydroformylation of unfunctionalized, internal alkenes. Tendai Gadzikwa, Rosalba Bellini, Henk L. Dekker and Joost. H. Reek* van t Hoff Institute

More information

HPLC-MS of the Initial Perfluorinated Surfactants and Shorter Chains:

HPLC-MS of the Initial Perfluorinated Surfactants and Shorter Chains: Details of the Analytical Procedures and Reactor Configurations. HPLC-MS of the Initial Perfluorinated Surfactants and Shorter Chains: Analysis for initial PF surfactant and possible shorter-chain products

More information

Ratiometric and intensity-based zinc sensors built on rhodol and rhodamine platforms

Ratiometric and intensity-based zinc sensors built on rhodol and rhodamine platforms Supporting Information Ratiometric and intensity-based zinc sensors built on rhodol and rhodamine platforms Elisa Tomat and Stephen J. Lippard* Department of Chemistry, Massachusetts Institute of Technology,

More information

Cationic Alkylaluminum-Complexed Zirconocene Hydrides as Participants in Olefin-Polymerization Catalysis. Supporting Information

Cationic Alkylaluminum-Complexed Zirconocene Hydrides as Participants in Olefin-Polymerization Catalysis. Supporting Information Cationic Alkylaluminum-Complexed Zirconocene Hydrides as Participants in Olefin-Polymerization Catalysis Steven M. Baldwin, John E. Bercaw, *, and Hans H. Brintzinger*, Contribution from the Arnold and

More information

Supporting Information. for. Angew. Chem. Int. Ed. Z Wiley-VCH 2003

Supporting Information. for. Angew. Chem. Int. Ed. Z Wiley-VCH 2003 Supporting Information for Angew. Chem. Int. Ed. Z53001 Wiley-VCH 2003 69451 Weinheim, Germany 1 Ordered Self-Assembly and Electronic Behavior of C 60 -Anthrylphenylacetylene Hybrid ** Seok Ho Kang 1,

More information

2017 Reaction of cinnamic acid chloride with ammonia to cinnamic acid amide

2017 Reaction of cinnamic acid chloride with ammonia to cinnamic acid amide 217 Reaction of cinnamic acid chloride with ammonia to cinnamic acid amide O O Cl NH 3 NH 2 C 9 H 7 ClO (166.6) (17.) C 9 H 9 NO (147.2) Classification Reaction types and substance classes reaction of

More information

Contents. Efficient synthesis of 5-(chloromethyl)furfural (CMF) from high fructose corn syrup (HFCS) using continuous flow processing

Contents. Efficient synthesis of 5-(chloromethyl)furfural (CMF) from high fructose corn syrup (HFCS) using continuous flow processing Electronic Supplementary Material (ESI) for Reaction Chemistry & Engineering. This journal is The Royal Society of Chemistry 2017 Electronic Supplementary Information (ESI) Efficient synthesis of 5-(chloromethyl)furfural

More information

Supporting Information

Supporting Information Supporting Information Ionic Dithioester-Based RAFT Agents Derived From N-Heterocyclic Carbenes Daniel J. Coady, Brent C. Norris, Vincent M. Lynch and Christopher W. Bielawski* Department of Chemistry

More information

Electronic Supplementary Information

Electronic Supplementary Information S1 Electronic Supplementary Information Direct Aerobic Oxidation of 2-Benzylpyridines in a Gas- Liquid Continuous-Flow Regime Using Propylene Carbonate as Solvent Bartholomäus Pieber and C. Oliver Kappe*

More information

An Efficient Total Synthesis and Absolute Configuration. Determination of Varitriol

An Efficient Total Synthesis and Absolute Configuration. Determination of Varitriol An Efficient Total Synthesis and Absolute Configuration Determination of Varitriol Ryan T. Clemens and Michael P. Jennings * Department of Chemistry, University of Alabama, 500 Campus Dr. Tuscaloosa, AL

More information

The importance of functional monomer dimerization in molecular imprinting process

The importance of functional monomer dimerization in molecular imprinting process Supplementary Information for The importance of functional monomer dimerization in molecular imprinting process Authors: Yagang Zhang, Di Song, Laura M. Lanni, Ken D. Shimizu* Department of Chemistry and

More information

SUPPLEMENTARY INFORMATION

SUPPLEMENTARY INFORMATION DOI: 10.1038/NCHEM.2633 Mechanically controlled radical polymerization initiated by ultrasound Hemakesh Mohapatra, Maya Kleiman, Aaron P. Esser-Kahn Contents 1. Materials and methods 2 2. Procedure for

More information

Supporting information

Supporting information Electronic Supplementary Material (ESI) for Green Chemistry. This journal is The Royal Society of Chemistry 2016 Supporting information From alcohol to 1,2,3-triazole via multi-step continuous-flow synthesis

More information

Electronic Supplementary Information

Electronic Supplementary Information Electronic Supplementary Material (ESI) for RSC Advances. This journal is The Royal Society of Chemistry 2014 S1 Electronic Supplementary Information Flash Carboxylation: Fast Lithiation - Carboxylation

More information

Supporting Information

Supporting Information Supporting Information An efficient and general method for the Heck and Buchwald- Hartwig coupling reactions of aryl chlorides Dong-Hwan Lee, Abu Taher, Shahin Hossain and Myung-Jong Jin* Department of

More information

Electronic Supplementary Information

Electronic Supplementary Information Electronic Supplementary Information General and highly active catalyst for mono and double Hiyama coupling reactions of unreactive aryl chlorides in water Dong-Hwan Lee, Ji-Young Jung, and Myung-Jong

More information

Supporting Information. Table of Contents. 1. General Notes Experimental Details 3-12

Supporting Information. Table of Contents. 1. General Notes Experimental Details 3-12 Supporting Information Table of Contents page 1. General Notes 2 2. Experimental Details 3-12 3. NMR Support for Timing of Claisen/Diels-Alder/Claisen 13 4. 1 H and 13 C NMR 14-37 General Notes All reagents

More information

Synthesis of borinic acids and borinate adducts using diisopropylaminoborane

Synthesis of borinic acids and borinate adducts using diisopropylaminoborane Synthesis of borinic acids and borinate adducts using diisopropylaminoborane Ludovic Marciasini, Bastien Cacciuttolo, Michel Vaultier and Mathieu Pucheault* Institut des Sciences Moléculaires, UMR 5255,

More information

Production of Renewable 1,3-Pentadiene from Xylitol via Formic. Acid-Mediated Deoxydehydration and Palladium-Catalyzed

Production of Renewable 1,3-Pentadiene from Xylitol via Formic. Acid-Mediated Deoxydehydration and Palladium-Catalyzed Electronic Supplementary Material (ESI) for Green Chemistry. This journal is The Royal Society of Chemistry 2016 Production of Renewable 1,3-Pentadiene from Xylitol via Formic Acid-Mediated Deoxydehydration

More information

Tunable Visible Light Emission of Self-Assembled Rhomboidal Metallacycles

Tunable Visible Light Emission of Self-Assembled Rhomboidal Metallacycles Tunable Visible Light Emission of Self-Assembled Rhomboidal Metallacycles J. Bryant Pollock,* Gregory L. Schneider, Timothy R. Cook, Andrew S. Davies, Peter J. Stang* Department of Chemistry, University

More information

Supporting Information

Supporting Information Supporting Information Supplementary Materials Isolation and characterisation of well-defined silicasupported azametallacyclopentane: key intermediate in catalytic hydroaminoalkylation reactions Bilel

More information

How to build and race a fast nanocar Synthesis Information

How to build and race a fast nanocar Synthesis Information How to build and race a fast nanocar Synthesis Information Grant Simpson, Victor Garcia-Lopez, Phillip Petemeier, Leonhard Grill*, and James M. Tour*, Department of Physical Chemistry, University of Graz,

More information

Supporting Information

Supporting Information Supporting Information An Extremely Active and General Catalyst for Suzuki Coupling Reactions of Unreactive Aryl Chlorides Dong-Hwan Lee and Myung-Jong Jin* School of Chemical Science and Engineering,

More information

RAFT /MADIX polymerization of N-vinylcaprolactam in water-ethanol solvent mixtures

RAFT /MADIX polymerization of N-vinylcaprolactam in water-ethanol solvent mixtures Electronic Supplementary Material (ESI) for Polymer Chemistry. This journal is The Royal Society of Chemistry 2017 Supporting information for RAFT /MADIX polymerization of N-vinylcaprolactam in water-ethanol

More information

637. Thiamethoxam. HPLC method

637. Thiamethoxam. HPLC method 637. Thiamethoxam HPLC method CIPAC Collaborative Trial according to CIPAC Information Sheet N o 293 Dr. Sven Adolph Syngenta Crop Protection Münchwilen AG CH-4333 Münchwilen Switzerland May 212 page 1

More information

Technical Procedure for Concentration Determination of Methamphetamine in Liquids via HPLC

Technical Procedure for Concentration Determination of Methamphetamine in Liquids via HPLC Technical Procedure for Concentration Determination of 1.0 Purpose This procedure specifies the required elements for the preparation and use of the Agilent 1100/1200 series High Performance Liquid Chromatograph

More information

A Novel Approach of Reduction of CO 2 into Methanol by Water Splitting with Aluminum over Copper Catalyst

A Novel Approach of Reduction of CO 2 into Methanol by Water Splitting with Aluminum over Copper Catalyst Electronic Supplementary Material (ESI) for RSC Advances. This journal is The Royal Society of Chemistry 2015 Supporting Information A Novel Approach of Reduction of CO 2 into Methanol by Water Splitting

More information

Regioselective Silylation of Pyranosides Using a Boronic Acid / Lewis Base Co-Catalyst System

Regioselective Silylation of Pyranosides Using a Boronic Acid / Lewis Base Co-Catalyst System Regioselective Silylation of Pyranosides Using a Boronic Acid / Lewis Base Co-Catalyst System Doris Lee and Mark S. Taylor* Department of Chemistry, Lash Miller Laboratories, University of Toronto 80 St.

More information

Supplementary Materials for

Supplementary Materials for www.sciencemag.org/content/351/6280/1424/suppl/dc1 Supplementary Materials for Catalytic borylation of methane Kyle T. Smith, Simon Berritt, Mariano González-Moreiras, Seihwan Ahn, Milton R. Smith III,*

More information

Supporting Information. Aqueous Dispersions of Polypropylene and Poly(1-butene) with Variable Microstructures formed with Neutral Ni(II)-Complexes

Supporting Information. Aqueous Dispersions of Polypropylene and Poly(1-butene) with Variable Microstructures formed with Neutral Ni(II)-Complexes Supporting Information Aqueous Dispersions of Polypropylene and Poly(1-butene) with Variable Microstructures formed with Neutral Ni(II)-Complexes Peter Wehrmann and Stefan Mecking General considerations.

More information

Silver-catalyzed decarboxylative acylfluorination of styrenes in aqueous media

Silver-catalyzed decarboxylative acylfluorination of styrenes in aqueous media Electronic Supplementary Material (ESI) for ChemComm. This journal is The Royal Society of Chemistry 2014 Supporting Information Silver-catalyzed decarboxylative acylfluorination of styrenes in aqueous

More information

Efficient Magnesium Catalysts for the Copolymerization of Epoxides and CO 2 ; Using Water to Synthesize Polycarbonate Polyols

Efficient Magnesium Catalysts for the Copolymerization of Epoxides and CO 2 ; Using Water to Synthesize Polycarbonate Polyols Supporting Information for Efficient Magnesium Catalysts for the Copolymerization of Epoxides and CO 2 ; Using Water to Synthesize Polycarbonate Polyols Michael R. Kember, Charlotte K. Williams* Department

More information

Supporting Information

Supporting Information Supporting Information ACA: A Family of Fluorescent Probes that Bind and Stain Amyloid Plaques in Human Tissue Willy M. Chang, a Marianna Dakanali, a Christina C. Capule, a Christina J. Sigurdson, b Jerry

More information

Copper-Catalyzed Oxidative Cyclization of Carboxylic Acids

Copper-Catalyzed Oxidative Cyclization of Carboxylic Acids Copper-Catalyzed xidative Cyclization of Carboxylic Acids Supplementary material (51 pages) Shyam Sathyamoorthi and J. Du Bois * Department of Chemistry Stanford University Stanford, CA 94305-5080 General.

More information

Tuning Porosity and Activity of Microporous Polymer Network Organocatalysts by Co-Polymerisation

Tuning Porosity and Activity of Microporous Polymer Network Organocatalysts by Co-Polymerisation Electronic Supplementary Material (ESI) for ChemComm. This journal is The Royal Society of Chemistry 2014 Supporting Information Tuning Porosity and Activity of Microporous Polymer Network Organocatalysts

More information

--> Buy True-PDF --> Auto-delivered in 0~10 minutes. GB Translated English of Chinese Standard: GB5009.

--> Buy True-PDF --> Auto-delivered in 0~10 minutes. GB Translated English of Chinese Standard: GB5009. Translated English of Chinese Standard: GB5009.17-2014 www.chinesestandard.net Sales@ChineseStandard.net NATIONAL STANDARD OF GB THE PEOPLE S REPUBLIC OF CHINA National Food Safety Standard-Determination

More information

Supporting Information

Supporting Information Copyright WILEY-VCH Verlag GmbH & Co. KGaA, 69469 Weinheim, Germany, 2012. Supporting Information for Macromol. Rapid Commun., DOI: 10.1002/marc.201200096 Chain-growth Polymerization of Aryl Grignards

More information

Muliple Gas#3 plus Sulfur GC Configuration

Muliple Gas#3 plus Sulfur GC Configuration The SRI Model 8610C Gas Chromatograph ( GC ) configured as a MultipleGas#3 plus Sulfur is designed to measure H2, O2, N2, CO, CO2, H2O, C1 through C5 hydrocarbons and also H2S, COS/SO2, and other sulfur

More information

Supplementary Material (ESI) for Chemical Communication

Supplementary Material (ESI) for Chemical Communication Supplementary Material (ESI) for Chemical Communication Syntheses and Characterization of Polymer-Supported Organotrifluoroborates: Applications in Radioiodination Reactions Li Yong; Min-Liang Yao; James

More information

Straightforward Synthesis of Enantiopure (R)- and (S)-trifluoroalaninol

Straightforward Synthesis of Enantiopure (R)- and (S)-trifluoroalaninol S1 Supplementary Material (ESI) for Organic & Biomolecular Chemistry This journal is (c) The Royal Society of Chemistry 2010 Straightforward Synthesis of Enantiopure (R)- and (S)-trifluoroalaninol Julien

More information

Targeting an Achilles Heel in Olefin Metathesis: A Strategy for High-Yield Synthesis of Second-Generation Grubbs Methylidene Catalysts

Targeting an Achilles Heel in Olefin Metathesis: A Strategy for High-Yield Synthesis of Second-Generation Grubbs Methylidene Catalysts Supplementary Information for: Targeting an Achilles Heel in Olefin Metathesis: A Strategy for High-Yield Synthesis of Second-Generation Grubbs Methylidene Catalysts Justin A.M. Lummiss, a Nicholas J.

More information

Supplementary Table S1: Response evaluation of FDA- approved drugs

Supplementary Table S1: Response evaluation of FDA- approved drugs SUPPLEMENTARY DATA, FIGURES AND TABLE BIOLOGICAL DATA Spheroids MARY-X size distribution, morphology and drug screening data Supplementary Figure S1: Spheroids MARY-X size distribution. Spheroid size was

More information

Supporting Information

Supporting Information Electronic Supplementary Material (ESI) for Polymer Chemistry. This journal is The Royal Society of Chemistry 2017 Supporting Information Photochemical Regulation of a Redox-Active Olefin Polymerization

More information

Simple Solution-Phase Syntheses of Tetrahalodiboranes(4) and their Labile Dimethylsulfide Adducts

Simple Solution-Phase Syntheses of Tetrahalodiboranes(4) and their Labile Dimethylsulfide Adducts Electronic Supplementary Material (ESI) for ChemComm. This journal is The Royal Society of Chemistry 2017 Supporting Information for: Simple Solution-Phase Syntheses of Tetrahalodiboranes(4) and their

More information

Hydrogenation of Silyl Formate: Sustainable Production of Silanol and Methanol from Silane and Carbon Dioxide

Hydrogenation of Silyl Formate: Sustainable Production of Silanol and Methanol from Silane and Carbon Dioxide Electronic Supplementary Material (ESI) for ChemComm. This journal is The Royal Society of Chemistry 2018 Supporting Information Hydrogenation of Silyl Formate: Sustainable Production of Silanol and Methanol

More information

BUFOTENINE Latest Revision: August 16, 2005

BUFOTENINE Latest Revision: August 16, 2005 BUFOTENINE Latest Revision: August 16, 25 H N HO N CH 3 CH 3 1. SYNONYMS CFR: Bufotenine CAS #: Base: 487-93-4 Other Names: N,N-dimethylserotonin, 5-hydroxy-N,N-dimethyltryptamine, mappine 2. CHEMICAL

More information

Structural Elucidation of Sumanene and Generation of its Benzylic Anions

Structural Elucidation of Sumanene and Generation of its Benzylic Anions Structural Elucidation of Sumanene and Generation of its Benzylic Anions idehiro Sakurai, Taro Daiko, iroyuki Sakane, Toru Amaya, and Toshikazu irao Department of Applied Chemistry, Graduate School of

More information

One-Pot Conversion of Methane to Light Olefins or Higher Hydrocarbons through H-SAPO-34 Catalyzed in-situ Halogenation

One-Pot Conversion of Methane to Light Olefins or Higher Hydrocarbons through H-SAPO-34 Catalyzed in-situ Halogenation S1 Supporting Information One-Pot Conversion of Methane to Light Olefins or Higher Hydrocarbons through H-SAPO-34 Catalyzed in-situ Halogenation Patrice T. D. Batamack, Thomas Mathew, G. K. Surya Prakash*

More information

with EDCI (5.73 g, 30.0 mmol) for 10 min. Bromoethylamine hydrobromide (6.15

with EDCI (5.73 g, 30.0 mmol) for 10 min. Bromoethylamine hydrobromide (6.15 2. A solution of Rhodamine B (14.2 g, 30.0 mmol) in CH 2 Cl 2 (40 ml) was treated with EDCI (5.73 g, 30.0 mmol) for 10 min. Bromoethylamine hydrobromide (6.15 g, 30.0 mmol) and TEA (4.21 ml, 3.03 g, 30.0

More information

Electronic Supplementary Information for. A Redox-Nucleophilic Dual-Reactable Probe for Highly Selective

Electronic Supplementary Information for. A Redox-Nucleophilic Dual-Reactable Probe for Highly Selective Electronic Supplementary Information for A Redox-Nucleophilic Dual-Reactable Probe for Highly Selective and Sensitive Detection of H 2 S: Synthesis, Spectra and Bioimaging Changyu Zhang, 1 Runyu Wang,

More information

Supporting Information

Supporting Information Electronic Supplementary Material (ESI) for ACS Chemical Neuroscience Supporting Information Fluorine-18-labeled Antagonist for PET Imaging of Kappa Opioid Receptors Zhengxin Cai,*, Songye Li, Richard

More information

Fe 2 O 3 and Co-Co 3 O 4 hydrogenation of nitroarenes under mild conditions

Fe 2 O 3 and Co-Co 3 O 4 hydrogenation of nitroarenes under mild conditions Electronic Supplementary Material (ESI) for Catalysis Science & Technology. This journal is The Royal Society of Chemistry 2016 Supporting information for Fe 2 O 3 /NGr@C- and Co-Co 3 O 4 /NGr@C-catalysed

More information

Supporting Information

Supporting Information S0 Supporting Information Probing the Origin of Degenerate Metathesis Selectivity via Characterization and Dynamics of Ruthenacyclobutanes Containing Variable NHCs Benjamin K. Keitz and Robert H. Grubbs*

More information

Electronic Supplementary Information

Electronic Supplementary Information Electronic Supplementary Information A new chemo-enzymatic route to chiral 2-hydroxy-4-phenylbutyrates by combining lactonase-mediated resolution with hydrogenation over Pd/C Bing Chen, a Hai-Feng Yin,

More information

A Sumanene-based Aryne, Sumanyne

A Sumanene-based Aryne, Sumanyne A Sumanene-based Aryne, Sumanyne Niti Ngamsomprasert, Yumi Yakiyama, and Hidehiro Sakurai* Division of Applied Chemistry, Graduate School of Engineering, Osaka University, 2-1 Yamadaoka, Suita, Osaka 565-0871

More information

Aziridine in Polymers: A Strategy to Functionalize Polymers by Ring- Opening Reaction of Aziridine

Aziridine in Polymers: A Strategy to Functionalize Polymers by Ring- Opening Reaction of Aziridine Electronic Supplementary Material (ESI) for Polymer Chemistry. This journal is The Royal Society of Chemistry 2015 Electronic Supplementary Information (ESI) Aziridine in Polymers: A Strategy to Functionalize

More information

Direct Synthesis of Ethylene-Acrylic Acid Copolymers by Insertion Polymerization

Direct Synthesis of Ethylene-Acrylic Acid Copolymers by Insertion Polymerization Supporting information Direct Synthesis of Ethylene-Acrylic Acid Copolymers by Insertion Polymerization Thomas Rünzi, Dominik Fröhlich and Stefan Mecking* Chair of Chemical Materials Science, Department

More information

Supporting Information for Polybenzimidazolium Salts: A New Class of. Anion-Conducting Polymer

Supporting Information for Polybenzimidazolium Salts: A New Class of. Anion-Conducting Polymer Supporting Information for Polybenzimidazolium Salts: A ew Class of Anion-Conducting Polymer Owen D. Thomas, Kristen J. W. Y. Soo, Timothy J. Peckham, Mahesh P. Kulkarni and Steven Holdcroft* Department

More information

Supporting Information. Highly Efficient Aerobic Oxidation of Various Amines Using Pd 3 Pb Intermetallic Compound Catalysts

Supporting Information. Highly Efficient Aerobic Oxidation of Various Amines Using Pd 3 Pb Intermetallic Compound Catalysts Electronic Supplementary Material (ESI) for ChemComm. This journal is The Royal Society of Chemistry 2014 Supporting Information Highly Efficient Aerobic Oxidation of Various Amines Using Pd 3 Pb Intermetallic

More information

Chemistry Instrumental Analysis Lecture 27. Chem 4631

Chemistry Instrumental Analysis Lecture 27. Chem 4631 Chemistry 4631 Instrumental Analysis Lecture 27 Gas Chromatography Introduction GC covers all chromatographic methods in which the mobile phase is gas. It may involve either a solid stationary phase (GSC)

More information

Sub-10-nm Au-Pt-Pd Alloy Trimetallic Nanoparticles with. High Oxidation-Resistant Property as Efficient and Durable

Sub-10-nm Au-Pt-Pd Alloy Trimetallic Nanoparticles with. High Oxidation-Resistant Property as Efficient and Durable Electronic Supplementary Material (ESI) for ChemComm. This journal is The Royal Society of Chemistry 2014 Electronic Supplementary Information Sub-10-nm Au-Pt-Pd Alloy Trimetallic Nanoparticles with High

More information

Selective Reduction of Carboxylic acids to Aldehydes Catalyzed by B(C 6 F 5 ) 3

Selective Reduction of Carboxylic acids to Aldehydes Catalyzed by B(C 6 F 5 ) 3 S1 Selective Reduction of Carboxylic acids to Aldehydes Catalyzed by B(C 6 F 5 ) 3 David Bézier, Sehoon Park and Maurice Brookhart* Department of Chemistry, University of North Carolina at Chapel Hill,

More information

Supplementary Information. Mapping the Transmission Function of Single-Molecule Junctions

Supplementary Information. Mapping the Transmission Function of Single-Molecule Junctions upplementary Information Mapping the Transmission Function of ingle-molecule Junctions Brian Capozzi 1, Jonathan Z. Low 2, Jianlong Xia 3, Zhen-Fei Liu 4, Jeffrey B. Neaton 5,6, Luis M. Campos 2, Latha

More information

Green Chemistry in the Undergraduate Organic Laboratory: Microwave-Assisted Synthesis of a Natural Insecticide on Basic Montmorillonite K10 Clay

Green Chemistry in the Undergraduate Organic Laboratory: Microwave-Assisted Synthesis of a Natural Insecticide on Basic Montmorillonite K10 Clay LAB PRCEDURE: Green Chemistry in the Undergraduate rganic Laboratory: Microwave-Assisted Synthesis of a Natural Insecticide on Basic Montmorillonite K10 Clay Matthew R. Dintzner*, Paul R. Wucka and Thomas

More information

Supplementary Material. Photostimulated synthesis of 2-(diphenylphosphino)benzoic acid by the S RN 1 reaction

Supplementary Material. Photostimulated synthesis of 2-(diphenylphosphino)benzoic acid by the S RN 1 reaction Supplementary Material Photostimulated synthesis of 2-(diphenylphosphino)benzoic acid by the S RN 1 reaction Silvia M. Barolo, Sandra E. Martín,* Roberto A. Rossi* INFIQC, Departamento de Química Orgánica,

More information

Automated Sample Preparation of Headspace Standards Using the Agilent 7696 WorkBench

Automated Sample Preparation of Headspace Standards Using the Agilent 7696 WorkBench Automated Sample Preparation of Headspace Standards Using the Agilent 7696 WorkBench Application Note Forensic Toxicology and Drug Testing Author Jared Bushey Agilent Technologies, Inc. 285 Centerville

More information

Chapter 27: Gas Chromatography

Chapter 27: Gas Chromatography Chapter 27: Gas Chromatography Gas Chromatography Mobile phase (carrier gas): gas (He, N 2, H 2 ) - do not interact with analytes - only transport the analyte through the column Analyte: volatile liquid

More information

Supporting Information

Supporting Information Supporting Information (Tetrahedron. Lett.) Cavitands with Inwardly and Outwardly Directed Functional Groups Mao Kanaura a, Kouhei Ito a, Michael P. Schramm b, Dariush Ajami c, and Tetsuo Iwasawa a * a

More information

Supporting Information

Supporting Information Supporting Information Wiley-VCH 2012 69451 Weinheim, Germany Synthesis of 1-Octanol and 1,1-Dioctyl Ether from Biomass-Derived Platform Chemicals** Jennifer Julis and Walter Leitner* anie_201203669_sm_miscellaneous_information.pdf

More information

Reduction-free synthesis of stable acetylide cobalamins. Table of Contents. General information. Preparation of compound 1

Reduction-free synthesis of stable acetylide cobalamins. Table of Contents. General information. Preparation of compound 1 Electronic Supporting Information Reduction-free synthesis of stable acetylide cobalamins Mikołaj Chromiński, a Agnieszka Lewalska a and Dorota Gryko* a Table of Contents General information Numbering

More information

H 3 CO H 3 CO S CH 3

H 3 CO H 3 CO S CH 3 FENITROTHION 35 H 3 CO P H 3 CO S O CH 3 NO 2 ISO common name Chemical name Fenitrothion O,O-Dimethyl O-4-nitro-m-tolyl phosphorothioate (IUPAC) O,O-Dimethyl O-(3-methyl-4-nitrophenyl)- phosphorothioate

More information

Experiment 6: Dehydration of 2-Methylcyclohexanol

Experiment 6: Dehydration of 2-Methylcyclohexanol Experiment 6: Dehydration of 2-Methylcyclohexanol Dehydration of 2-Methylcyclohexanol This week's reaction: A B - dehydration of a 2 alcohol to give a mixture of alkene isomers - H 3 PO 4 is a catalyst

More information

Catalytic hydrogenation of liquid alkenes with a silica grafted hydride. pincer iridium(iii) complex: Support for a heterogeneous mechanism

Catalytic hydrogenation of liquid alkenes with a silica grafted hydride. pincer iridium(iii) complex: Support for a heterogeneous mechanism Electronic Supplementary Material (ESI) for Catalysis Science & Technology. This journal is The Royal Society of Chemistry 215 Electronic Supplementary Information for Catalysis Science & Technology Catalytic

More information

Supporting Information

Supporting Information Supporting Information α,β-d-cna Preorganization of unpaired loop moiety stabilize DNA hairpin Christelle Dupouy, Pierre Millard, Arnaud Boissonnet and Jean-Marc Escudier* Laboratoire de Synthèse et Physico-Chimie

More information

1. A gas chromatograph equipped with flame ionization detection and a computing integrator.

1. A gas chromatograph equipped with flame ionization detection and a computing integrator. HYDRO.02-1 HYDROXYETHYL SUBSTITUTION LEVEL PRINCIPLE SCOPE The hydroxyethyl group is cleaved from the starch by hydrogen iodide in the presence of adipic acid and an organic solvent containing a known

More information

ASPARTAME. Not less than 98% and not more than 102% on the dried basis. White, odourless, crystalline powder, having a strong sweet taste

ASPARTAME. Not less than 98% and not more than 102% on the dried basis. White, odourless, crystalline powder, having a strong sweet taste ASPARTAME Prepared at the 25th JECFA (1981), published in FNP 19 (1981) and in FNP 52 (1992). Metals and arsenic specifications revised at the 57th JECFA (2001) An ADI of 0-40 mg/kg bw was established

More information

Supporting Information for

Supporting Information for Supporting Information for Deuteration of boranes: catalysed versus non-catalysed processes David J. Nelson, Jonathan B. Egbert and Steven P. Nolan* EaStCHEM, School of Chemistry, University of St. Andrews,

More information

Supporting Information. Labeled Ligand Displacement: Extending NMR-based Screening of Protein Targets

Supporting Information. Labeled Ligand Displacement: Extending NMR-based Screening of Protein Targets Supporting Information Labeled Ligand Displacement: Extending NMR-based Screening of Protein Targets Steven L. Swann, Danying Song, Chaohong Sun, Philip J. Hajduk, and Andrew M. Petros Global Pharmaceutical

More information