Mechanical modelling of SiC/SiC composites and design criteria
|
|
- William Davis
- 5 years ago
- Views:
Transcription
1 Mechanical modelling of SiC/SiC composites and design criteria F. Bernachy CEA, DEN/DMN/SRMA/LC2M, Gif-sur-Yvette, France L. Gélébart CEA, DEN/DMN/SRMA/LC2M, Gif-sur-Yvette, France J. Crépin Centre des Matériaux, Mines ParisTech, Evry, France M. Bornert Laboratoire Navier, Ecole des Ponts ParisTech, Marne-la-Vallée, France AIEA FR13 Paris 06/03/ MARS 2013 CEA 06/03/2013 PAGE 1
2 CONTEXT AND MOTIVATIONS OF THE STUDY CEA 06/03/2013 PAGE 2 13 MARS 2013
3 SiC/SiC COMPOSITES FOR FUEL CLADDING New operating conditions for GFRs (Gas-cooled Fast Reactors) Higher temperatures (nominal C, accidental C) High flux of fast neutrons SiC/SiC composites possess a deterministic mechanical behavior, high strains at failure (compared to monolithic SiC) and good properties under irradiation SiC/SiC GFR nuclear fuel cladding Due to open porosity : ϕ 9.6mm SiC/SiC tube elaborated at CEA (C. Sauder), similar to the tubular fuel cladding concept Leak-tightness is ensured by a thin metallic liner with no mechanical function (CEA patent) : Fuel pellet SiC/SiC layers Liner (refractory alloy) 13 MARS 2013 CEA 06/03/2013 PAGE 3
4 MOTIVATIONS OF THE STUDY Few studies exist about the mechanical behavior of 3rd gen. SiC/SiC composites with a complex architecture, and under complex loadings There is a need for several mechanical characterizations : Damage criteria Elastic properties (anisotropic) Failure criteria Non-linear constitutive laws Elastic-linear simulations for normal operating conditions Non-linear simulations for accidental conditions The anisotropy of the material requires multiaxial tests Measurement techniques, mechanical tests, models are developped on a reference material 13 MARS 2013 CEA 06/03/2013 PAGE 4
5 REFERENCE MATERIAL Microstructure 1 internal filament winding layer at D-braided layers at 45 (32 tows per layer, 500 fibers per tow) Porosity ~ 10% No metallic liner 2 porosity scales: intertow, intratow Elaboration process Fiber preform of 3 rd gen. SiC fibers Hi-Nicalon S (ϕ 13µm) Chemical Vapor Infiltration (CVI) of pyrocarbon interphase (100 nm) Consolidation : deposition of the SiC matrix (CVI) After Murakami etching 13 MARS 2013 CEA 06/03/2013 PAGE 5
6 BIAXIAL TESTS CEA 06/03/2013 PAGE 6 13 MARS 2013
7 EXPERIMENTAL SETUP Hydraulic testing machine Piezoelectric sensor Resin Lights Low noise camera Axial-shear extensometer Sample Telecentric lens To AE amplification & acquisition SiC/SiC tube 13 MARS 2013 CEA 06/03/2013 PAGE 7
8 UNIAXIAL TESTS : TENSION Anisotropic elastic properties Highly non-linear behavior due to damage : Creation and opening of matrix cracks, arrested by the fibers After saturation of matrix cracking, ultimate failure due to fibre failures Cyclic tension Effects : Decrease of the elastic properties Tension/compression asymmetrical behavior (cracks close under compressive stresses) Hysteresis loops due to friction of crack surfaces 13 MARS 2013 CEA 06/03/2013 PAGE 8
9 UNIAXIAL TESTS : TORSION Torsion damage on tubes causes a loss of orthotropy in the tube axes Orientation of cracks dependent on the principal stress orientation from SEM observations of surface matrix cracks Cyclic torsion Orientation of crack normals/tube axis 13 MARS 2013 CEA 06/03/2013 PAGE 9
10 BIAXIAL TESTS 13 monotonic tests at constant biaxiality ratio : β = σ zz /σ θz (β = 0, β = 0,5, β = 1, β = 2, β = ) Shear strain Axial strain Circ. strain 13 MARS 2013 CEA 06/03/2013 PAGE 10
11 DESIGN CRITERIA CEA 06/03/2013 PAGE MARS 2013
12 Normalized cumulated energy DAMAGE AND FAILURE THRESHOLDS (1/2) From experimental data, we define 2 experimental damage thresholds Acoustic damage threshold - Criterion on the normalized cumulated acoustic energy For example, for 10% total energy Simple tension : σ zz d = 115 MPa Axial stress (MPa) Mechanical damage threshold - Criterion on the non-linear strains Initial computed compliance tensor We use here the usual tensor norm and we assume no out-of-plane damage 13 MARS 2013 CEA 06/03/2013 PAGE 12
13 DAMAGE AND FAILURE THRESHOLDS (2/2) non-linear strain damage surface Scattered failure stresses correspond to identical damage thresholds Good agreement between AE and Mechanical thresholds 13 MARS 2013 CEA 06/03/2013 PAGE 13
14 MECHANICAL MODELLING CEA 06/03/2013 PAGE MARS 2013
15 ELASTIC PROPERTIES Optimization of in-plane compliance tensor coefficients on biaxial stress-strain curves Comparison with numerical homogeneization of the composite : Experimental approach : Elastic properties from experimental data (assuming material orthotropy) Multiscale numerical approach : Homogeneization of the tow (Chateau, 2011) Homogeneization of the composite (Lestringant, 2012) Full initial stiffness tensor of the composite 13 MARS 2013 CEA 06/03/2013 PAGE 15
16 GOALS OF DAMAGE MODELLING Correct simulation of the tension-torsion tests in the identification set Taking into account unilateral effects (restauration of the initial elastic properties in compression) Simple model, based on few micromechanical assumptions Few model parameters to identify Chosen representation of damage : 4 crack systems at 0, 90, 45, -45 Independant crack systems, no interaction 13 MARS 2013 CEA 06/03/2013 PAGE 16
17 MACROSCOPIC DAMAGE MODELLING (1/2) Strain from cracks of system i is given by the homogeneisation of a microcracked elastic material with no interaction between cracks : Crack density Crack opening displacement Crack normal vector We use a deactivation index η, evolving between 0 (compression) and 1 (tension) to reproduce unilateral damage : Thus, our constitutive law is : Crack density Deactivation index Crack opening displacement Crack normal vector Stored strain Elastic deformation Deformation due to damage Crack opening displacement law : linear function of the stress vector Damage growth law : saturating (Weibull type) law 13 MARS 2013 CEA 06/03/2013 PAGE 17
18 MACROSCOPIC DAMAGE MODELLING (2/2) Identified model gives good results at all tested biaxiality ratios Accurate prediction of compression torsion test Possible improvements : 2 nd mechanism : fibre failure Better representations of damage (more crack systems, coupling between systems...) Crack opening laws in accordance with micromechanics Complex loading paths have still to be tested 13 MARS 2013 CEA 06/03/2013 PAGE 18
19 MODEL IMPLEMENTATION IN CAST3M Implementation of the model in CEA's FE code CAST3M Stress formulation implies inversion of the stress-strain relation using Newton-Raphson iterations Simulation of a SiC/SiC tube under 3-point bending Crack density (ρ 0 +ρ 90 +ρ 45 +ρ -45 )/4 Deflection (mm) 13 MARS 2013 CEA 06/03/2013 PAGE 19
20 Outcomes and perspectives Definition of damage criteria, easy to measure and reproducible Useful for design purposes Results about the biaxial mechanical behavior of the tubes Construction and identification of a damage model Measurement of elastic properties in good agreement with multiscale simulations Non-linear behavior has still to be adressed using a multiscale approach. Possible strategies : Building of a 3D homogeneous damage model of the tow Simulation of the initiation and propagation of cracks through the composite More experimental results coming to adress several issues Non proportional tests (complex loading paths) Investigation of crack opening/closure mechanism Tension-internal pressure tests Mechanical properties along the orthoradial direction Tests on other microstructures (braiding and winding angles) Bending tests Test of the mechanical model and close to industrial issues 13 MARS 2013 CEA 06/03/2013 PAGE 20
21 Thank you for your attention! PAGE 21 CEA 06/03/2013 Commissariat à l énergie atomique et aux énergies alternatives Centre de Saclay Gif-sur-Yvette Cedex T. +33 (0) F. +33 (0) DANS DMN SRMA 13 MARS 2013 Etablissement public à caractère industriel et commercial RCS Paris B
Modelling the effects of various contents of fillers on the relaxation rate of filled rubbers
Modelling the effects of various contents of fillers on the relaxation rate of filled rubbers L. Laiarinandrasana, A. Jean, D. Jeulin, S. Forest MINES ParisTech MAT Centre des Matériaux CNRS UMR 7633 BP
More informationULTRASONIC WAVE PROPAGATION IN DISSIMILAR METAL WELDS APPLICATION OF A RAY-BASED MODEL AND COMPARISON WITH EXPERIMENTAL RESULTS
ULTRASONIC WAVE PROPAGATION IN DISSIMILAR METAL WELDS APPLICATION OF A RAY-BASED MODEL AND COMPARISON WITH EXPERIMENTAL RESULTS Audrey GARDAHAUT 1, Hugues LOURME 1, Frédéric JENSON 1, Shan LIN 2, Masaki
More informationMONTE CARLO POWER ITERATION: ENTROPY AND SPATIAL CORRELATIONS
MONTE CARLO POWER ITERATION: ENTROPY AND SPATIAL CORRELATIONS ANDREA ZOIA, M. NOWAK (CEA/SACLAY) E. DUMONTEIL, A. ONILLON (IRSN) J. MIAO, B. FORGET, K. S. SMITH (MIT) NEA EGAMCT meeting Andrea ZOIA DEN/DANS/DM2S/SERMA/LTSD
More informationMultiscale analyses of the behaviour and damage of composite materials
Multiscale analyses of the behaviour and damage of composite materials Presented by Didier BAPTISTE ENSAM, LIM, UMR CNRS 8006 151 boulevard de l hôpital l 75013 PARIS, France Research works from: K.Derrien,
More informationEnhancing Prediction Accuracy In Sift Theory
18 TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS Enhancing Prediction Accuracy In Sift Theory J. Wang 1 *, W. K. Chiu 1 Defence Science and Technology Organisation, Fishermans Bend, Australia, Department
More informationTHE ROLE OF CORRELATIONS IN MONTE CARLO CRITICALITY SIMULATIONS
THE ROLE OF CORRELATIONS IN MONTE CARLO CRITICALITY SIMULATIONS ANDREA ZOIA CEA/SACLAY Séminaire MANON Andrea ZOIA DEN/DANS/DM2S/SERMA/LTSD March 22nd 2016 APRILE 13, 2016 PAGE 1 OUTLINE q Power iteragon
More informationModelling of Specimen Interaction with Ferrite Cored Coils by Coupling Semi-Analytical and Numerical Techniques
Modelling of Specimen Interaction with Ferrite Cored Coils by Coupling Semi-Analytical and Numerical Techniques A. Skarlatos, E. Demaldent, A. Vigneron and C. Reboud 25 th 28 th of June, Bratislava, Slovak
More informationA Performance Modeling Strategy based on Multifiber Beams to Estimate Crack Openings ESTIMATE in Concrete Structures CRACK
A Performance Modeling Strategy based on Multifiber Beams to Estimate Crack Openings ESTIMATE in Concrete Structures CRACK A. Medjahed, M. Matallah, S. Ghezali, M. Djafour RiSAM, RisK Assessment and Management,
More informationMAE 322 Machine Design. Dr. Hodge Jenkins Mercer University
MAE 322 Machine Design Dr. Hodge Jenkins Mercer University What is this Machine Design course really about? What you will learn: How to design machine elements 1) Design so they won t break under varying
More informationFINITE ELEMENT ANALYSIS OF COMPOSITE MATERIALS
FINITE ELEMENT ANALYSIS OF COMPOSITE MATERIALS Ever J. Barbero Department of Mechanical and Aerospace Engineering West Virginia University USA CRC Press Taylor &.Francis Group Boca Raton London New York
More informationAn Evaluation of Simplified Methods to Compute the Mechanical Steady State
An Evaluation of Simplified Methods to Compute the Mechanical Steady State T. Herbland a,b, G. Cailletaud a, S. Quilici a, H. Jaffal b, M. Afzali b a Mines Paris Paris Tech, CNRS UMR 7633, BP 87, 91003
More informationVolume 2 Fatigue Theory Reference Manual
Volume Fatigue Theory Reference Manual Contents 1 Introduction to fatigue 1.1 Introduction... 1-1 1. Description of the applied loading... 1-1.3 Endurance curves... 1-3 1.4 Generalising fatigue data...
More informationExperimental study of mechanical and thermal damage in crystalline hard rock
Experimental study of mechanical and thermal damage in crystalline hard rock Mohammad Keshavarz Réunion Technique du CFMR - Thèses en Mécanique des Roches December, 3 nd 2009 1 Overview Introduction Characterization
More informationLecture #8: Ductile Fracture (Theory & Experiments)
Lecture #8: Ductile Fracture (Theory & Experiments) by Dirk Mohr ETH Zurich, Department of Mechanical and Process Engineering, Chair of Computational Modeling of Materials in Manufacturing 2015 1 1 1 Ductile
More informationQUESTION BANK Composite Materials
QUESTION BANK Composite Materials 1. Define composite material. 2. What is the need for composite material? 3. Mention important characterits of composite material 4. Give examples for fiber material 5.
More informationMMJ1133 FATIGUE AND FRACTURE MECHANICS A - INTRODUCTION INTRODUCTION
A - INTRODUCTION INTRODUCTION M.N.Tamin, CSMLab, UTM Course Content: A - INTRODUCTION Mechanical failure modes; Review of load and stress analysis equilibrium equations, complex stresses, stress transformation,
More informationTOWARD VIRTUAL CERAMIC COMPOSITES
TOWARD VIRTUAL CERAMIC COMPOSITES M. Genet 1, P. Ladevèze 12, G. Lubineau 1 1 LMT-Cachan (ENS-Cachan, CNRS, Paris 6 University, UniverSud Paris PRES) 61 avenue du Président Wilson 94235 Cachan CEDEX {genet,
More informationStatic and Time Dependent Failure of Fibre Reinforced Elastomeric Components. Salim Mirza Element Materials Technology Hitchin, UK
Static and Time Dependent Failure of Fibre Reinforced Elastomeric Components Salim Mirza Element Materials Technology Hitchin, UK Introduction Fibre reinforced elastomers are used in many applications,
More informationNUMERICAL SIMULATION OF CONCRETE EXPOSED TO HIGH TEMPERATURE DAMAGE AND EXPLOSIVE SPALLING
NUMERICAL SIMULATION OF CONCRETE EXPOSED TO HIGH TEMPERATURE DAMAGE AND EXPLOSIVE SPALLING Prof. Joško Ožbolt 1 Josipa Bošnjak 1, Goran Periškić 1, Akanshu Sharma 2 1 Institute of Construction Materials,
More informationA RESEARCH ON NONLINEAR STABILITY AND FAILURE OF THIN- WALLED COMPOSITE COLUMNS WITH OPEN CROSS-SECTION
A RESEARCH ON NONLINEAR STABILITY AND FAILURE OF THIN- WALLED COMPOSITE COLUMNS WITH OPEN CROSS-SECTION H. Debski a*, J. Bienias b, P. Jakubczak b a Faculty of Mechanical Engineering, Department of Machine
More informationMODELING OF THE BEHAVIOR OF WOVEN LAMINATED COMPOSITES UNTIL RUPTURE
MODELING OF THE BEHAVIOR OF WOVEN LAMINATED COMPOSITES UNTIL RUPTURE Jean Paul Charles, Christian Hochard,3, Pierre Antoine Aubourg,3 Eurocopter, 375 Marignane cedex, France Unimeca, 6 rue J. Curie, 3453
More informationINFLUENCE OF RANDOM LOCAL LOAD SHARING ON TENSILE BEHAVIOR OF MULTIFILAMENT TOWS AND CERAMIC MATRIX COMPOSITE FAILURE
INFLUENCE OF RANDOM LOCAL LOAD SHARING ON TENSILE BEHAVIOR OF MULTIFILAMENT TOWS AND CERAMIC MATRIX COMPOSITE FAILURE V. Calard and J. Lamon Laboratoire des Composites Thermostructuraux UMR 501 (CNRS-SNECMA-CEA-University
More informationLecture #7: Basic Notions of Fracture Mechanics Ductile Fracture
Lecture #7: Basic Notions of Fracture Mechanics Ductile Fracture by Dirk Mohr ETH Zurich, Department of Mechanical and Process Engineering, Chair of Computational Modeling of Materials in Manufacturing
More informationDamage law identification of a quasi brittle ceramic from a bending test using digital image correlation
EPJ Web of Conferences 6, 6 3 () DOI:.5/epjconf/63 Owned by the authors, published by EDP Sciences, Damage law identification of a quasi brittle ceramic from a bending test using digital image correlation
More informationMulti-scale approach of the mechanical behavior of RC structures Application to nuclear plant containment buildings
Multi-scale approach of the mechanical behavior of RC structures Application to nuclear plant containment buildings Martin DAVID June 19, 2012 1 Industrial context EDF is responsible for numerous reinforced
More informationThis is an author-deposited version published in: Eprints ID: 8849
Open Archive Toulouse Archive Ouverte (OATAO) OATAO is an open access repository that collects the work of Toulouse researchers and makes it freely available over the web where possible. This is an author-deposited
More informationThe Power of Ultrasonic Characterisation for Completely Assessing the Elastic Properties of Materials
11th European Conference on Non-Destructive Testing (ECNDT 214), October 6-1, 214, Prague, Czech Republic The Power of Ultrasonic Characterisation for Completely Assessing the Elastic Properties of Materials
More informationQUALIFICATION OF A CFD CODE FOR REACTOR APPLICATIONS
QUALIFICATION OF A CFD CODE FOR REACTOR APPLICATIONS Ulrich BIEDER whole TrioCFD Team DEN-STMF, CEA, UNIVERSITÉ PARIS-SACLAY www.cea.fr SÉMINAIRE ARISTOTE, NOVEMBER 8, 2016 PAGE 1 Outline Obective: analysis
More informationPLASTICITY AND VISCOPLASTICITY UNDER CYCLIC LOADINGS
ATHENS Course MP06 Nonlinear Computational Mechanics March 16 to 20, 2009 PLASTICITY AND VISCOPLASTICITY UNDER CYCLIC LOADINGS Jean-Louis Chaboche ONERA, 29 av. de la Division Leclerc 92320 Châtillon,
More informationQuality control of neutron-absorber materials for the nuclear fuel cycle, Principle of the JEN-3 neutron Backscattering gauge
Quality control of neutron-absorber materials for the nuclear fuel cycle, Principle of the JEN-3 neutron Backscattering gauge Hamid MAKIL (CEADRT/LIST/LCAE) Patrick BRISSET (IAEA) ICARST 2017, 24 28 April
More informationAPPLICATION OF DAMAGE MODEL FOR NUMERICAL DETERMINATION OF CARRYING CAPACITY OF LARGE ROLLING BEARINGS
INTERNATIONAL ESIGN CONFERENCE - ESIGN ubrovnik, May 14-17,. APPLICATION OF AMAGE MOEL FOR NUMERICAL ETERMINATION OF CARRYING CAPACITY OF LARGE ROLLING BEARINGS Robert Kunc, Ivan Prebil, Tomaž Rodic and
More informationDevelopment and application of time-lapse ultrasonic tomography for laboratory characterisation of localised deformation in hard soils / soft rocks
Development and application of time-lapse ultrasonic tomography for laboratory characterisation of localised deformation in hard soils / soft rocks Erika Tudisco Research Group: Stephen A. Hall Philippe
More informationDiscrete Element Modelling of a Reinforced Concrete Structure
Discrete Element Modelling of a Reinforced Concrete Structure S. Hentz, L. Daudeville, F.-V. Donzé Laboratoire Sols, Solides, Structures, Domaine Universitaire, BP 38041 Grenoble Cedex 9 France sebastian.hentz@inpg.fr
More informationTHERMOHYDRAULIC TRANSIENTS IN BOILING HELIUM NATURAL CIRCULATION LOOPS
THERMOHYDRAULIC TRANSIENTS IN BOILING HELIUM NATURAL CIRCULATION LOOPS Hernán FURCI Director: Chantal MEURIS Supervisor: Bertrand BAUDOUY Laboratoire de Cryogénie et Station d Essais SACM/IRFU/CEA de Saclay
More informationINCREASING RUPTURE PREDICTABILITY FOR ALUMINUM
1 INCREASING RUPTURE PREDICTABILITY FOR ALUMINUM Influence of anisotropy Daniel Riemensperger, Adam Opel AG Paul Du Bois, PDB 2 www.opel.com CONTENT Introduction/motivation Isotropic & anisotropic material
More informationCHARACTERIZATION AND DAMAGE EVOLUTION OF S.M.C COMPOSITES MATERIALS BY ULTRASONIC METHOD
CHARACTERIZATION AND DAMAGE EVOLUTION OF S.M.C COMPOSITES MATERIALS BY ULTRASONIC METHOD M. SAYARI, D.BAPTISTE, M. BOCQUET AND J.FITOUSSI Laboratoire de Microstructure et Mécanique des Matériaux, URA CNRS
More informationCode Strategy for Simulating Severe Accident Scenario
Code Strategy for Simulating Severe Accident Scenario C. SUTEAU, F. SERRE, J.-M; RUGGIERI, F. BERTRAND -CEA- March 4-7, 2013, Paris, France christophe.suteau@cea.fr OULINES INTRODUCTION AND CONTEXT REFERENCE
More informationSimultaneous front and rear faces flash characterization method for thin cylindrical multilayered composites.
Simultaneous front and rear faces flash characterization method for thin cylindrical multilayered composites. L. Duquesne (1)( * ), C. Lorrette (), C. Pradere (3), G. L. Vignoles (4) and J-C. Batsale (3)
More informationTransactions on Modelling and Simulation vol 10, 1995 WIT Press, ISSN X
Parameters controlling the numerical simulation validity of damageable composite toughness testing S. Yotte, C. Currit, E. Lacoste, J.M. Quenisset Laboratoire de Genie Meanique - IUT 'A\ Domaine Universitaire,
More informationFINITE ELEMENT AND EXPERIMENTAL STUDY OF NOVEL CONCEPT OF 3D FIBRE CELL STRUCTURE
FINITE ELEMENT AND EXPERIMENTAL STUDY OF NOVEL CONCEPT OF 3D FIBRE CELL STRUCTURE M. Růžička, V. Kulíšek 2, J. Had, O. Prejzek Department of Mechanics, Biomechanics and Mechatronics, Faculty of Mechanical
More informationLAMINATION THEORY FOR THE STRENGTH OF FIBER COMPOSITE MATERIALS
XXII. LAMINATION THEORY FOR THE STRENGTH OF FIBER COMPOSITE MATERIALS Introduction The lamination theory for the elastic stiffness of fiber composite materials is the backbone of the entire field, it holds
More informationDynamic Analysis of a Reinforced Concrete Structure Using Plasticity and Interface Damage Models
Dynamic Analysis of a Reinforced Concrete Structure Using Plasticity and Interface Damage Models I. Rhee, K.J. Willam, B.P. Shing, University of Colorado at Boulder ABSTRACT: This paper examines the global
More informationA TIME-DEPENDENT DAMAGE LAW IN DEFORMABLE SOLID: A HOMOGENIZATION APPROACH
9th HSTAM International Congress on Mechanics Limassol, Cyprus, - July, A TIME-DEPENDENT DAMAGE LAW IN DEFORMABLE SOLID: A HOMOGENIZATION APPROACH Cristian Dascalu, Bertrand François, Laboratoire Sols
More informationCrash and Impact Simulation of Composite Structures by Using CAE Process Chain
Crash and Impact Simulation of Composite Structures by Using CAE Process Chain Madhukar Chatiri 1, Thorsten Schütz 2, Anton Matzenmiller 3, Ulrich Stelzmann 1 1 CADFEM GmbH, Grafing/Munich, Germany, mchatiri@cadfem.de
More informationTable of Contents. Foreword... xiii Introduction... xv
Foreword.... xiii Introduction.... xv Chapter 1. Controllability of Geotechnical Tests and their Relationship to the Instability of Soils... 1 Roberto NOVA 1.1. Introduction... 1 1.2. Load control... 2
More informationComputers and Geotechnics
Computers and Geotechnics 39 (212) 16 Contents lists available at SciVerse ScienceDirect Computers and Geotechnics journal homepage: www.elsevier.com/locate/compgeo Numerical analysis of the failure process
More informationExperimental and theoretical characterization of Li 2 TiO 3 and Li 4 SiO 4 pebbles
Experimental and theoretical characterization of Li 2 TiO 3 and Li 4 SiO 4 s D. Aquaro 1 N. Zaccari ABSTRACT Dipartimento di Ingegneria Meccanica Nucleare e della Produzione University of Pisa (Italy)
More informationPlane Strain Test for Metal Sheet Characterization
Plane Strain Test for Metal Sheet Characterization Paulo Flores 1, Felix Bonnet 2 and Anne-Marie Habraken 3 1 DIM, University of Concepción, Edmundo Larenas 270, Concepción, Chile 2 ENS - Cachan, Avenue
More informationTHE MUTUAL EFFECTS OF SHEAR AND TRANSVERSE DAMAGE IN POLYMERIC COMPOSITES
THE 19 TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS THE MUTUAL EFFECTS OF SHEAR AND TRANSVERSE DAMAGE IN POLYMERIC COMPOSITES L.V. Smith 1 *, M. Salavatian 1 1 School of Mechanical and Materials
More informationA FINITE ELEMENT MODEL TO PREDICT MULTI- AXIAL STRESS-STRAIN RESPONSE OF CERAMIC MATRIX COMPOSITES WITH STRAIN INDUCED DAMAGE
A FINITE ELEMENT MODEL TO PREDICT MULTI- AXIAL STRESS-STRAIN RESPONSE OF CERAMIC MATRIX COMPOSITES WITH STRAIN INDUCED DAMAGE Daxu Zhang and D. R. Hayhurst School of Mechanical, Aerospace and Civil Engineering,
More informationConstitutive models: Incremental (Hypoelastic) Stress- Strain relations. and
Constitutive models: Incremental (Hypoelastic) Stress- Strain relations Example 5: an incremental relation based on hyperelasticity strain energy density function and 14.11.2007 1 Constitutive models:
More informationOpen-hole compressive strength prediction of CFRP composite laminates
Open-hole compressive strength prediction of CFRP composite laminates O. İnal 1, A. Ataş 2,* 1 Department of Mechanical Engineering, Balikesir University, Balikesir, 10145, Turkey, inal@balikesir.edu.tr
More informationGeology 229 Engineering Geology. Lecture 5. Engineering Properties of Rocks (West, Ch. 6)
Geology 229 Engineering Geology Lecture 5 Engineering Properties of Rocks (West, Ch. 6) Common mechanic properties: Density; Elastic properties: - elastic modulii Outline of this Lecture 1. Uniaxial rock
More information3D simulations of an injection test done into an unsaturated porous and fractured limestone
3D simulations of an injection test done into an unsaturated porous and fractured limestone A. Thoraval *, Y. Guglielmi, F. Cappa INERIS, Ecole des Mines de Nancy, FRANCE *Corresponding author: Ecole des
More informationSmall crack energy release rate from configurational force balance in hyperelastic materials
Small crack energy release rate from configurational force balance in hyperelastic materials M. Aït-Bachir, E. Verron, W. V. Mars, and P. Castaing Institut de Recherche en Génie Civil et Mécanique, Ecole
More informationAnalysis of Composite Pressure Vessels
Analysis of Composite Pressure Vessels Reza Mohammadzadeh Gheshlaghi 1 Mohammad Hassan Hojjati Hamid Reza Mohammadi Daniali 3 1 Engineering Research Centre, Tabriz, Iran,3 Department of Mechanical Engineering,
More informationGATE SOLUTIONS E N G I N E E R I N G
GATE SOLUTIONS C I V I L E N G I N E E R I N G From (1987-018) Office : F-16, (Lower Basement), Katwaria Sarai, New Delhi-110016 Phone : 011-65064 Mobile : 81309090, 9711853908 E-mail: info@iesmasterpublications.com,
More informationIJSER 1. INTRODUCTION. M.Elhadary
1591 A new failure criterion for GRP composite materials subjected to in-phase and out-of-phase biaxial fatigue loading under different stress ratios M.Elhadary Abstract this studying the fatigue behavior
More informationLifetime prediction of filled elastomers in consideration of multiaxial stress states. London, 14 th of October
Lifetime prediction of filled elastomers in consideration of multiaxial stress states London, 14 th of October 2010 Motivation Fatigue of elastomer products Failure of a clutch Firestone Case Fatigue tests
More informationBifurcation Analysis in Geomechanics
Bifurcation Analysis in Geomechanics I. VARDOULAKIS Department of Engineering Science National Technical University of Athens Greece and J. SULEM Centre d'enseignement et de Recherche en Mecanique des
More informationMAGNETIC ANISOTROPY IN TIGHT-BINDING
MAGNETIC ANISOTROPY IN TIGHT-BINDING Cyrille Barreteau Magnetic Tight-Binding Workshop, London10-11 Sept. 2012 9 SEPTEMBRE 2012 CEA 10 AVRIL 2012 PAGE 1 SOMMAIRE TB Model TB 0 : Mehl & Papaconstantopoulos
More informationStress-strain response and fracture behaviour of plain weave ceramic matrix composites under uni-axial tension, compression or shear
Xi an 2-25 th August 217 Stress-strain response and fracture behaviour of plain weave ceramic matrix composites under uni-axial tension compression or shear Heyin Qi 1 Mingming Chen 2 Yonghong Duan 3 Daxu
More informationComputational Analysis for Composites
Computational Analysis for Composites Professor Johann Sienz and Dr. Tony Murmu Swansea University July, 011 The topics covered include: OUTLINE Overview of composites and their applications Micromechanics
More informationCode_Aster. HSNV129 - Test of compression-dilation for study of the coupling thermics-cracking
Titre : HSNV129 - Essai de compression-dilatation pour étu[...] Date : 28/2/218 Page : 1/8 HSNV129 - Test of compression-dilation for study of the coupling thermics-cracking Summary: One applies to an
More informationFatigue and Fracture
Fatigue and Fracture Multiaxial Fatigue Professor Darrell F. Socie Mechanical Science and Engineering University of Illinois 2004-2013 Darrell Socie, All Rights Reserved When is Multiaxial Fatigue Important?
More informationChapter 6: Plastic Theory
OHP Mechanical Properties of Materials Chapter 6: Plastic Theory Prof. Wenjea J. Tseng 曾文甲 Department of Materials Engineering National Chung Hsing University wenjea@dragon.nchu.edu.tw Reference: W. F.
More informationPlasticity R. Chandramouli Associate Dean-Research SASTRA University, Thanjavur
Plasticity R. Chandramouli Associate Dean-Research SASTRA University, Thanjavur-613 401 Joint Initiative of IITs and IISc Funded by MHRD Page 1 of 9 Table of Contents 1. Plasticity:... 3 1.1 Plastic Deformation,
More informationCharacterizations of Aluminum Alloy Sheet Materials Numisheet 2005
Characterizations of Aluminum Alloy Sheet Materials Numisheet 25 John C. Brem, Frederic Barlat, Robert E. Dick, and Jeong-Whan Yoon Alcoa Technical Center, PA, 1569-1, USA Abstract. This report reproduces
More informationModelling the nonlinear shear stress-strain response of glass fibrereinforced composites. Part II: Model development and finite element simulations
Modelling the nonlinear shear stress-strain response of glass fibrereinforced composites. Part II: Model development and finite element simulations W. Van Paepegem *, I. De Baere and J. Degrieck Ghent
More informationA critical analysis of the Mises stress criterion used in frequency domain fatigue life prediction
Focussed on Multiaxial Fatigue and Fracture A critical analysis of the Mises stress criterion used in frequency domain fatigue life prediction Adam Niesłony Opole University of Technology, Poland a.nieslony@po.opole.pl,
More informationAuthors: Correspondence: ABSTRACT:
Multi-Scale Modeling of the Impact and Failure of Fiber Reinforced Polymer Structures using DIGIMAT to LS-DYNA Interface Authors: L. Adam, R. Assaker & R. Ramaya e-xstream engineering S.A. 7, Rue du Bosquet.
More informationA novel approach to predict the growth rate of short cracks under multiaxial loadings
A novel approach to predict the growth rate of short cracks under multiaxial loadings F. Brugier 1&2, S. Pommier 1, R. de Moura Pinho 2, C. Mary 2 and D. Soria 2 1 LMT-Cachan, ENS Cachan / CNRS / UPMC
More informationNEW DEVELOPMENTS OF AUTORADIOGRAPHY TECHNIQUE TO IMPROVE ALPHA AND BETA MEASUREMENTS FOR DECOMMISSIONING FACILITIES
NEW DEVELOPMENTS OF AUTORADIOGRAPHY TECHNIQUE TO IMPROVE ALPHA AND BETA MEASUREMENTS FOR DECOMMISSIONING FACILITIES PASCAL FICHET, C MOUGEL, Y DESNOYERS, P SARDINI, H WORD DEN SERVICE D ETUDES ANALYTIQUES
More informationSTRESS UPDATE ALGORITHM FOR NON-ASSOCIATED FLOW METAL PLASTICITY
STRESS UPDATE ALGORITHM FOR NON-ASSOCIATED FLOW METAL PLASTICITY Mohsen Safaei 1, a, Wim De Waele 1,b 1 Laboratorium Soete, Department of Mechanical Construction and Production, Ghent University, Technologiepark
More informationSiping Road 1239, , Shanghai, P.R. China
COMPARISON BETWEEN LINEAR AND NON-LINEAR KINEMATIC HARDENING MODELS TO PREDICT THE MULTIAXIAL BAUSCHINGER EFFECT M.A. Meggiolaro 1), J.T.P. Castro 1), H. Wu 2) 1) Department of Mechanical Engineering,
More informationAn orthotropic damage model for crash simulation of composites
High Performance Structures and Materials III 511 An orthotropic damage model for crash simulation of composites W. Wang 1, F. H. M. Swartjes 1 & M. D. Gan 1 BU Automotive Centre of Lightweight Structures
More informationStrength of GRP-laminates with multiple fragment damages
Strength of GRP-laminates with multiple fragment damages S. Kazemahvazi, J. Kiele, D. Zenkert Kungliga Tekniska Högskolan, KTH 100 44 Stockholm, Sweden sohrabk@kth.se SUMMARY The strength of glass fibre
More informationPredicting Fatigue Life with ANSYS Workbench
Predicting Fatigue Life with ANSYS Workbench How To Design Products That Meet Their Intended Design Life Requirements Raymond L. Browell, P. E. Product Manager New Technologies ANSYS, Inc. Al Hancq Development
More informationMODELLING OF THE BEHAVIOUR OF ARAMID FOLDED CORES UP TO GLOBAL CRUSHING
MODELLING OF THE BEHAVIOUR OF ARAMID FOLDED CORES UP TO GLOBAL CRUSHING E. Baranger, C. Cluzel, P.-A. Guidault, O. Allix LMT-Cachan (ENS Cachan/CNRS/UPMC/PRES UniverSud Paris) 61 av. du Président Wilson,
More informationMultiaxial Fatigue. Professor Darrell F. Socie. Department of Mechanical Science and Engineering University of Illinois at Urbana-Champaign
Multiaxial Fatigue Professor Darrell F. Socie Department of Mechanical Science and Engineering University of Illinois at Urbana-Champaign 2001-2011 Darrell Socie, All Rights Reserved Contact Information
More informationIDENTIFICATION OF SHEET METAL PLASTIC ANISOTROPY, AND OPTIMIZATION OF INITIAL BLANK SHAPE IN DEEP DRAWING
THE ANNALS OF DUNĂREA DE JOS UNIVERSITY OF GALAŢI FASCICLE V, TECHNOLOGIES IN MACHINE BUILDING, ISSN - 66, 9 IDENTIFICATION OF SHEET METAL PLASTIC ANISOTROPY, AND OPTIMIZATION OF INITIAL BLANK SHAPE IN
More informationLocal Strain and Damage Measurements on a Composite with Digital Image Correlation and Acoustic Emission
Local Strain and Damage Measurements on a Composite with Digital Image Correlation and Acoustic Emission Camille Flament, Michelle Salvia, Bruno Berthel, Gérard Crosland To cite this version: Camille Flament,
More informationParticle flow simulation of sand under biaxial test
5th International Conference on Civil Engineering and Transportation (ICCET 2015) Particle flow simulation of sand under biaxial test Xiao-li Dong1,2, a *,Wei-hua Zhang1,a 1 Beijing City University, China
More informationLow-Cycle Fatigue Crack Growth in Ti-6242 at Elevated Temperature Rebecka Brommesson 1,a, Magnus Hörnqvist,2,b, and Magnus Ekh 3,c
Low-Cycle Fatigue Crack Growth in Ti-6242 at Elevated Temperature Rebecka Brommesson 1,a, Magnus Hörnqvist,2,b, and Magnus Ekh 3,c 1,3 Department of Applied Mechanics, Chalmers University of Technology,
More informationConstitutive Relations
Constitutive Relations Dr. Andri Andriyana Centre de Mise en Forme des Matériaux, CEMEF UMR CNRS 7635 École des Mines de Paris, 06904 Sophia Antipolis, France Spring, 2008 Outline Outline 1 Review of field
More informationTHE BEHAVIOUR OF REINFORCED CONCRETE AS DEPICTED IN FINITE ELEMENT ANALYSIS.
THE BEHAVIOUR OF REINFORCED CONCRETE AS DEPICTED IN FINITE ELEMENT ANALYSIS. THE CASE OF A TERRACE UNIT. John N Karadelis 1. INTRODUCTION. Aim to replicate the behaviour of reinforced concrete in a multi-scale
More informationNUMERICAL SIMULATION OF THE INELASTIC SEISMIC RESPONSE OF RC STRUCTURES WITH ENERGY DISSIPATORS
NUMERICAL SIMULATION OF THE INELASTIC SEISMIC RESPONSE OF RC STRUCTURES WITH ENERGY DISSIPATORS ABSTRACT : P Mata1, AH Barbat1, S Oller1, R Boroschek2 1 Technical University of Catalonia, Civil Engineering
More informationFatigue calculations in ANSYS Workbench. Martin Eerme
Fatigue calculations in ANSYS Workbench Martin Eerme What is fatigue? In materials science, fatigue is the progressive and localized structural damage that occurs when a material is subjected to cyclic
More informationModeling and Simulations of Aircraft Structures Stiffness, Damage, and Failure Prediction for Laminated Composites
Modeling and Simulations of Aircraft Structures Stiffness, Damage, and Failure Prediction for Laminated Composites H.E.Pettermann 1, C.Schuecker 1, D.H.Pahr 2, F.G.Rammerstorfer 2 1 Austrian Aeronautics
More informationBIAXIAL STRENGTH INVESTIGATION OF CFRP COMPOSITE LAMINATES BY USING CRUCIFORM SPECIMENS
BIAXIAL STRENGTH INVESTIGATION OF CFRP COMPOSITE LAMINATES BY USING CRUCIFORM SPECIMENS H. Kumazawa and T. Takatoya Airframes and Structures Group, Japan Aerospace Exploration Agency 6-13-1, Ohsawa, Mitaka,
More informationRheology. October 2013
Rheology Georges Cailletaud Centre des Matériaux MINES ParisTech/CNRS October 2013 Georges Cailletaud Rheology 1/44 Contents 1 Mechanical tests Structures Representative material elements 2 Rheological
More informationAn investigation of the mechanical behaviour of carbon epoxy cross ply cruciform specimens under biaxial loading
An investigation of the mechanical behaviour of carbon epoxy cross ply cruciform specimens under biaxial loading A. Makris, C. Ramault, D. Van Hemelrijck Department of Mechanics of Materials and Constructions,
More informationLecture 8. Stress Strain in Multi-dimension
Lecture 8. Stress Strain in Multi-dimension Module. General Field Equations General Field Equations [] Equilibrium Equations in Elastic bodies xx x y z yx zx f x 0, etc [2] Kinematics xx u x x,etc. [3]
More informationDESIGN OF LAMINATES FOR IN-PLANE LOADING
DESIGN OF LAMINATES FOR IN-PLANOADING G. VERCHERY ISMANS 44 avenue F.A. Bartholdi, 72000 Le Mans, France Georges.Verchery@m4x.org SUMMARY This work relates to the design of laminated structures primarily
More informationContinuum Damage Mechanics for hysteresis and fatigue of quasi-brittle materials and structures
Continuum Damage Mechanics for hysteresis and fatigue of quasi-brittle materials and structures R. Desmorat, F. Ragueneau, H. Pham LMT-Cachan, ENS Cachan/Université Paris 6/CNRS, 61, av. du président Wilson,
More informationDESIGN OF COMPOSITE LAMINATED STRUCTURES BY POLAR METHOD AND TOPOLOGY OPTIMISATION
DESIGN OF COMPOSIE LAMINAED SUCUES BY POLA MEOD AND OPOLOGY OPIMISAION A. Jibawy,,3, C. Julien,,3, B. Desmorat,,4, (*), A. Vincenti UPMC Univ Paris 6, UM 79, Institut Jean Le ond d Alembert B.P. 6 4, place
More informationInverse identification of plastic material behavior using. multi-scale virtual experiments
Inverse identification of plastic material behavior using multi-scale virtual experiments Debruyne 1 D., Coppieters 1 S., Wang 1 Y., Eyckens 2 P., Kuwabara 3 T., Van Bael 2 A. and Van Houtte 2 P. 1 Department
More informationPLY LEVEL UNCERTAINTY EFFECTS ON FAILURE OF COMPOSITE
7th European Workshop on Structural Health Monitoring July 8-11, 2014. La Cité, Nantes, France More Info at Open Access Database www.ndt.net/?id=17206 PLY LEVEL UNCERTAINTY EFFECTS ON FAILURE OF COMPOSITE
More informationALGORITHM FOR NON-PROPORTIONAL LOADING IN SEQUENTIALLY LINEAR ANALYSIS
9th International Conference on Fracture Mechanics of Concrete and Concrete Structures FraMCoS-9 Chenjie Yu, P.C.J. Hoogenboom and J.G. Rots DOI 10.21012/FC9.288 ALGORITHM FOR NON-PROPORTIONAL LOADING
More informationInterlaminar fracture characterization in composite materials by using acoustic emission
5th International Symposium on NDT in Aerospace, 13-15th November 2013, Singapore Interlaminar fracture characterization in composite materials by using acoustic emission Ian SILVERSIDES 1, Ahmed MASLOUHI
More information