Structural Dynamic Modification Studies Using Updated Finite Element Model
|
|
- Everett Garrett
- 6 years ago
- Views:
Transcription
1 Structural Dynamic Modification Studies Using Updated Finite Element Model Gupta A. K., Nakra B. C. 1 and Kundra T. K. 2 IRDE Dehradun 1 NSIT New Delhi 2 Deptt. of Mechanical Engg. IIT New Delhi ABSTRACT. The aim of the present work is to develop an updated FE model of the drilling machine using analytical & experimental results, and to use this updated model to predict the effect of Structural Dynamic Modifications (SDM) on modal properties of the machine. The model updating has been done using indirect method. sensitivity based Bayesian parameter estimation technique has been applied. Modal test has been carried out on drilling machine using random noise generator. Modal identification of the experimental FRFs has been carried out using Global method. The analytical FE Modeling of the drilling machine has been carried out using beam elements. The analytical FE results have been correlated with the experimental results and MAC has been calculated. After correlation, the analytical FE model has been updated in the light of experimental data. The discrepancy between experimental and analytical model has been considerably reduced after updating. This updated FE model has been used for computer level modifications and effects of lumped mass have been studied on updated model. The updated model is compared with dynamic test results and the result has found to be satisfactory. 1. INTRODUCTION Dynamic design, which is an area of vibration and noise engineering, has acquired considerable importance due to demands on higher performance capabilities of complex mechanical and structural system like those of machine tools, engines etc. The conventional dynamic design is basically hit and trial method in which we try to achieve desired dynamic characteristics by making several prototypes. The disadvantage of this technique is that actual design cycle takes lot of time and its not cost effective. The
2 modifications in the actual prototype are made iteratively until the desired dynamic characteristics are obtained. As compared to conventional dynamic design, model updating based dynamic design has helped to bring finite element model close to real systems. Accordingly the effect of structural modifications on dynamic characteristics to improve dynamic design can be predicted at the computer level, making the process highly optimum one in terms of time, energy and money. The dynamic design variable can be further optimised for desired objective function of cost, weight, power etc 2. MODAL TESTING AND IDENTIFICATION OF DRILLING MACHINE Modal testing of drilling machine has been carried out in order to obtain the experimental modal properties i.e. natural frequency, mode shape & modal damping. As shown in Fig. 1, the machine tool structure has been excited at the base using random noise generator and response has measured at various points. Fig. 1: The structure under test The inertance plot for the experimental FRF has been shown in the Fig. 2. In the plot the response has been measured at point 1 while the excitation is at point 20. The modal
3 identification of multiple FRFs has been carried out using GRF-M method in ICATS software. The first mode has been found to be 8.79 Hz and the second mode is Hz. Fig. 2: Inertance plot for unmodified drilling machine 3. FINITE ELEMENT ANALYSIS OF DRILLING MACHINE The Finite element model has been made in I-DEAS software. The model has been made using beam mesh. Although the FE model has been simplified but the beam elements has rotational degree of freedom which cannot be measured experimentally. Therefore the FE model need to be reduced. Guyan [7] has given the method of reducing system matrices. The FE model has been reduced using model reduction utility in FEMtools software. Since during the modal testing we have only excited in plane therefore we are correlating those modes which are in plane. As shown in table 1, the first and fourth modes are in plane and hence are required for correlation. Table 1: FEA Natural frequencies Mode No Frequency Mode shape Hz In plane Hz Out of plane Hz Out of plane Hz In plane
4 4. CORRELATION OF ANALYTICAL AND EXPERIMENTAL MODEL The common result of analytical analysis and modal testing is a set of modal parameters (resonance frequencies, damping and mode shape) which characterise the linear dynamics of the structure. The first stage of any reconciliation exercise is to determine how closely the experimental and analytical models correspond. Correlation analysis is the technique to quantitatively and qualitatively examine the correspondence and differences between analytically and experimentally obtained modal parameters. Modal Assurance criterion (MAC) is defined as MAC ({ },{ φ } ) φ = 2 T * { φx } { } i φa j T * T ({ φ } { φ }){ ( φ } { φ } ) X i A j * X i X i A j A where φ X - experimental mode, φ A - analytical mode Model correlation gives a direct and objective comparison of specific dynamic properties (measured versus predicted) as well as quantify the extent to which the differences (or similarities) is present. The reduced FE model has been correlated with the experimental model and MAC has been obtained. FEMtools software [6] is being used for model correlation. The comparison of analytical and experimental natural frequency has been in table 2. j Table 2: Comparison of Natural Frequency (FEA Vs EMA) Mode No FEA Frequency EMA Frequency Error (%) MAC Hz Hz Hz Hz MODEL UPDATING USING INDIRECT METHOD The model updating of drilling machine has been carried out using modal sensitivity method. Modal sensitivity for the selected parameters has been found out using FEMtools software. This has been further used for model updating. FEMtools software uses Bayesian parameter estimation [6] which is a iterative method of model updating and it is sensitivity based parameter estimation. The objective of model updating is to adjust the values of selected parameters such that a reference correlation coefficient is minimised.
5 The FEMtools software computes several correlation coefficients. They are either based on the errors of the individual modal parameters selected as responses (resonance frequencies, modal displacements), global correlation information (MAC) or other response data like expected relative error C ri on the response value. 5.1 Model Updating Results The FE model has been updated using sensitivity method. The updating parameter selected are Young s modulus of elasticity (D) Mass density ( RHO) Cross section area (A x ) Bending moment of inertia (I Y ) The normalised sensitivity has been calculated for the above parameters for both the modes using software. With the updating parameters, the model updating programme has been executed for five iteration, with a maximum of 1% variation in the the weighted absolute relative difference (CCABSOLUTE) between resonance frequencies Table 3: Comparison of natural frequency (after updating) Mode No FEA Frequency EMA Frequency Error (%) MAC Hz The results after updating have been tabulated in table 3. It can be seen that error between analytical and experimental natural frequency has reduced to less than 1% after updating. 6. STRUCTURAL DYNAMIC MODIFICATION USING UPDATED FINITE ELEMENT MODEL Structural Dynamic Modification techniques are methods by which dynamic behaviour of the structure can be improved by adding the modifications like those of lumped mass, spring, damper etc. Structural modification is an area of study that deals with the effect of physical parameter changes on the dynamic properties of a structural system. These physical parameters are related to mass, stiffness and damping properties
6 of a system or to a combination of them. Structural dynamic modification has been done here in order to see the effect of modification on updated finite element model. The FEMtools software has a set of modification elements e.g. mass, spring, bar, beam, truss etc. Here the updated model has been taken for modification and the effect has been seen for mass modification. 6.1 Effect of Mass Modification on Updated Model To see the effect of mass modification, a mass of 20 Kg has been added on node 20 on top of the central column of the machine and the effect of this modification has been analysed. The first natural frequency has been reduced to 8.3 Hz from 8.8 Hz while the second natural frequency has been reduced to 42.8 Hz from 44.4 Hz. The mass has been varied from 20 to 100 kg and the modified natural frequency is listed in table 4 Table 4: Effect of mass modification Mass Modification (Kg) First Mode Second Mode 6.2 Validation of Updated Model for Mass Modification The drilling machine structure has been modified by adding an additional mass of 14.3 Kg has been added on top of the vertical column. The result of dynamic test and updated model prediction has been presented in table 5. Table 5: Measured Frequency Vs Updated model predictions Mode No Measured Updated Model % Error frequency Predictions % %
7 The comparison of dynamic test and updated model prediction for mass modification of 14.3 Kg has been shown in table 6. The error for the first mode has been less than 1% while the error is more in the higher mode. The results suggest that the structural dynamic modification using updated model can be used for prediction of dynamic characteristics. 7. SUMMARY The present work has started with modal testing of a drilling machine. The experiment has been conducted on drilling machine using random exciter. The drilling machine has been excited at one point and the response has been taken at different points on the drilling machine. The frequency response function has been stored in Real time FFT analyser and is transferred to the computer through serial port communication ((RS 232C). Modal identification has been carried out in I-CATS software and modal properties namely natural frequencies, mode shapes and modal damping has been found out. The FE model of the drilling machine has been made in I-DEAS software and it has been analysed for normal mode analysis to find out analytical natural frequencies and mode shapes. Significant discrepancy has been found between analytical FE data and experimental modal analysis (EMA) data. The model has been updated and changes in the different parameters have been found out. After the model updating the updated model has come very close to actual test data and discrepancy has been considerably reduced. The updated model has been used for structural dynamic modification and has been validated experimentally. REFERENCES 1. Allemang, R.L.,and Brown, D.L., A Correlation coefficient for modal vector analysis, Proceeding of 1 st IMAC, pp , Agarwal, A., Dynamic Design of a Machine Tool Structure using Modal Testing, Simulation and SDM, M Tech Thesis, Deptt. of Mechanical Engg., IIT Delhi, Brown, D.L., Allemang, R.J., Mergeay, M., Parameter Estimation Technique For Modal Analysis, SAE Transaction, 88, , Ewins, D.J., Modal Testing: Theory and Practice, John Willey and Sons, New York, 1984.
8 5. Friswell, M.I.,and Mottershead, J.E., Finite Element Model Updating in Structural Dynamics, Kluwer Academic Publishers, Dordrecht, FEMtools theoretical Manual Version 2.0, Dynamic design solutions, Guyan, R.J., Reduction of Stiffness and Mass Matrices, AIAA Journal, 3, 2, 380, Goyder, H.G.D., Methods and Application of Structural Modeling from Measured Structural Frequency Response Data, journal of sound and vibration, 68, 2, Imergun, M.,and Visser, W.J., A Review of Model Updating techniques, Journal of Sound and vibration, ASME, 9-20, January Kundra, T.K., Studies in identification and modification of dynamic Mechanical system, Ph.D. Thesis, Deptt. of Mechanical Engg., IIT Delhi, Kundra, T.K.,and Nakra, B.C., Structural dynamic modification and model updating to improve the dynamic characteristics of machine tools, IITD-IRD Ref. RP 1085, Kumar, D., Optimal Dynamic Design Studies of a Machine Tool Structure using Structural Dynamic Modification, M Tech Thesis, Deptt. of Mechanical Engg., IIT Delhi, Lin, R.M., Lim, M.K., Du, H., Improved Inverse Eigensensitivity method for structural analytical Model Updating, Journal of Vibration and Acoustics, ASME, 117, , April Minas, C.,and Inman, D.J., Matching Finite elements model to modal data, Journal of Vibration and Acoustics, ASME, 112, 84-91, January Mottershead, J.E.,and Friswell, M.I., Model Updating in Structural Dynamics : A Survey, Journal of sound and vibration, 167, 2, , Maia, N.M.M.,and Silva, J.M.M., Theoretical and Experimental Modal Analysis, John Willey & Sons, New York, 1997.
1330. Comparative study of model updating methods using frequency response function data
1330. Comparative study of model updating methods using frequency response function data Dong Jiang 1, Peng Zhang 2, Qingguo Fei 3, Shaoqing Wu 4 Jiangsu Key Laboratory of Engineering Mechanics, Nanjing,
More informationEstimation of Rotational FRFs via Cancellation Methods
Estimation of Rotational FRFs via Cancellation Methods Nomenclature ij ( l, k ) ij M. Reza shory, Semnan university, Iran Email: mashoori@semnan.ac.ir exact ccelerance measured accelerance when two mechanical
More informationResearch on the iterative method for model updating based on the frequency response function
Acta Mech. Sin. 2012) 282):450 457 DOI 10.1007/s10409-012-0063-1 RESEARCH PAPER Research on the iterative method for model updating based on the frequency response function Wei-Ming Li Jia-Zhen Hong Received:
More informationCOUPLED USE OF FEA AND EMA FOR THE INVESTIGATION OF DYNAMIC BEHAVIOUR OF AN INJECTION PUMP
COUPLED USE OF FEA AND EMA FOR THE INVESTIGATION OF DYNAMIC BEHAVIOUR OF AN INJECTION PUMP Yasar Deger Wolfram Lienau Peter Sandford Sulzer Markets & Sulzer Pumps Ltd Sulzer Pumps (UK) Ltd Technology Ltd
More informationDETC98/PTG-5788 VIBRO-ACOUSTIC STUDIES OF TRANSMISSION CASING STRUCTURES
Proceedings of DETC98: 1998 ASME Design Engineering Technical Conference September 13-16, 1998, Atlanta, GA DETC98/PTG-5788 VIBRO-ACOUSTIC STUDIES O TRANSMISSION CASING STRUCTURES D. Crimaldi Graduate
More informationAn Expansion Method Dealing with Spatial Incompleteness of Measured Mode Shapes of Beam Structures
Appl. Math. Inf. Sci. 8, o. 2, 651-656 (2014) 651 Applied Mathematics & Information Sciences An International Journal http://dx.doi.org/10.12785/amis/080223 An Expansion Method Dealing with Spatial Incompleteness
More informationStructural Dynamic Finite Element Model Updating using Derringer s Function: A Novel Technique
Structural Dynamic Finite Element Model Updating using Derringer s Function: A Novel Technique SHANKAR SEHGAL and HARMESH KUMAR * Department of Mechanical Engineering University Institute of Engineering
More informationCurve Fitting Analytical Mode Shapes to Experimental Data
Curve Fitting Analytical Mode Shapes to Experimental Data Brian Schwarz, Shawn Richardson, Mar Richardson Vibrant Technology, Inc. Scotts Valley, CA ABSTRACT In is paper, we employ e fact at all experimental
More informationMODEL REDUCTION USING GUYAN, IRS, AND DYNAMIC METHODS
MODEL REDUCTION USING GUYAN, IRS, AND DYNAMIC METHODS Christopher C. Flanigan Manager, Advanced Test and Analysis SDRC Operations, Inc. 11995 El Camino Real, Suite 200 San Diego, California 92130 USA ABSTRACT
More informationCOMPARISON OF MODE SHAPE VECTORS IN OPERATIONAL MODAL ANALYSIS DEALING WITH CLOSELY SPACED MODES.
IOMAC'5 6 th International Operational Modal Analysis Conference 5 May-4 Gijón - Spain COMPARISON OF MODE SHAPE VECTORS IN OPERATIONAL MODAL ANALYSIS DEALING WITH CLOSELY SPACED MODES. Olsen P., and Brincker
More informationBroadband Vibration Response Reduction Using FEA and Optimization Techniques
Broadband Vibration Response Reduction Using FEA and Optimization Techniques P.C. Jain Visiting Scholar at Penn State University, University Park, PA 16802 A.D. Belegundu Professor of Mechanical Engineering,
More informationStructural Characterization of Rakanji Stone Arch Bridge by Numerical Model Updating
Structural Analysis of Historical Constructions, New Delhi 2006 P.B. ourenço, P. Roca, C. Modena, S. Agrawal (Eds.) Structural Characterization of Rakanji Stone Arch Bridge by Numerical Model Updating
More informationSystem Parameter Identification for Uncertain Two Degree of Freedom Vibration System
System Parameter Identification for Uncertain Two Degree of Freedom Vibration System Hojong Lee and Yong Suk Kang Department of Mechanical Engineering, Virginia Tech 318 Randolph Hall, Blacksburg, VA,
More informationKaunadis [5] analyzed the vibration analysis of cantilever beam in free and forced condition. The cantilever beam was loaded at different locations.
Vibration Analysis of Cantilever Beam: An Experimental Study Mr. P.Kumar 1, Dr. S.Bhaduri 2, Dr. A. Kumar 3 1-3 Department of Mechanical Engineering, Birla Institute of Technology Mesra, Jharkhand, India
More informationImproving the Accuracy of Dynamic Vibration Fatigue Simulation
Improving the Accuracy of Dynamic Vibration Fatigue Simulation Kurt Munson HBM Prenscia Agenda 2 1. Introduction 2. Dynamics and the frequency response function (FRF) 3. Using finite element analysis (FEA)
More informationReview of modal testing
Review of modal testing A. Sestieri Dipartimento di Meccanica e Aeronautica University La Sapienza, Rome Presentation layout - Modelling vibration problems - Aim of modal testing - Types of modal testing:
More informationDYNAMIC ANALYSIS, UPDATING AND MODIFICATION OF TRUCK CHASSIS
Regional Conference on Engineering Mathematics, Mechanics, Manufacturing & Architecture (EM 3 ARC) 2007 2007 Noise, Vibration and Comfort Research Group Editors: M.J. Mohd Nor, S. Abdullah, N. Jamaluddin,
More informationDirect Identification of Damping Parameters From FRF and Its Application to Compressor Engineering
Purdue University Purdue e-pubs International Compressor Engineering Conference School of Mechanical Engineering 2000 Direct Identification of Damping Parameters From FRF and Its Application to Compressor
More informationDamage Assessment of the Z24 bridge by FE Model Updating. Anne Teughels 1, Guido De Roeck
Damage Assessment of the Z24 bridge by FE Model Updating Anne Teughels, Guido De Roeck Katholieke Universiteit Leuven, Department of Civil Engineering Kasteelpark Arenberg 4, B 3 Heverlee, Belgium Anne.Teughels@bwk.kuleuven.ac.be
More informationVibration Analysis of a Horizontal Washing Machine, Part IV: Optimal Damped Vibration Absorber
RESEARCH ARTICLE Vibration Analysis of a Horizontal Washing Machine, Part IV: Optimal Damped Vibration Absorber Galal Ali Hassaan Department of Mechanical Design & Production, Faculty of Engineering, Cairo
More informationIntroduction to Mechanical Vibration
2103433 Introduction to Mechanical Vibration Nopdanai Ajavakom (NAV) 1 Course Topics Introduction to Vibration What is vibration? Basic concepts of vibration Modeling Linearization Single-Degree-of-Freedom
More informationModal analysis of the Jalon Viaduct using FE updating
Porto, Portugal, 30 June - 2 July 2014 A. Cunha, E. Caetano, P. Ribeiro, G. Müller (eds.) ISSN: 2311-9020; ISBN: 978-972-752-165-4 Modal analysis of the Jalon Viaduct using FE updating Chaoyi Xia 1,2,
More informationUsing Operating Deflection Shapes to Detect Misalignment in Rotating Equipment
Using Operating Deflection Shapes to Detect Misalignment in Rotating Equipment Surendra N. Ganeriwala (Suri) & Zhuang Li Mark H. Richardson Spectra Quest, Inc Vibrant Technology, Inc 8205 Hermitage Road
More informationOperational modal analysis and assessment of an historic RC arch bridge
Structural Studies, Repairs and Maintenance of Heritage Architecture X 525 Operational modal analysis and assessment of an historic RC arch bridge C. Gentile & N. Gallino Department of Structural Engineering,
More informationThe use of transmissibility properties to estimate FRFs on modified structures
Shock and Vibration 7 (00) 56 577 56 DOI 0./SAV-00-058 IOS Press The use of transmissibility properties to estimate FRFs on modified structures R.A.B. Almeida a,, A.P.V. Urgueira a and N.M.M. Maia b a
More informationEstimation of Rotational Degrees of Freedom by EMA and FEM Mode Shapes
Estimation of Rotational Degrees of Freedom by EMA and FEM Mode Shapes A. Sestieri, W. D Ambrogio, R. Brincker, A. Skafte, A. Culla Dipartimento di Ingegneria Meccanica e Aerospaziale, Università di Roma
More informationVALIDATION OF LARGE STRUCTURAL DYNAMICS MODELS USING MODAL TEST DATA
IMPERIAL COLLEGE OF SCIENCE, TECHNOLOGY & MEDICINE University of London VALIDATION OF LARGE STRUCTURAL DYNAMICS MODELS USING MODAL TEST DATA by Nedzad Imamovic A thesis submitted to the University of London
More informationSTRUCTURAL OPTIMIZATION OF TRACTOR FRAME FOR NOISE REDUCTION
STRUCTURAL OPTIMIZATION OF TRACTOR FRAME FOR NOISE REDUCTION Takayuki Koizumi, Nobutaka Tsujiuchi, Shigeyuki Sawabe Doshisha Univercity, Kyotanabe, Kyoto, Japan, ntsujiuc@mail.doshisha.ac.jp Isamu Kubomoto,
More informationPROJECT 1 DYNAMICS OF MACHINES 41514
PROJECT DYNAMICS OF MACHINES 454 Theoretical and Experimental Modal Analysis and Validation of Mathematical Models in Multibody Dynamics Ilmar Ferreira Santos, Professor Dr.-Ing., Dr.Techn., Livre-Docente
More informationMatlab code for stochastic model updating
Matlab code for stochastic model updating The Matlab code provided performs the stochastic model updating methods described in [1] and [2] using the data obtained from experiments. This document contains
More informationSENSOR DESIGN FOR PIEZOELECTRIC CANTILEVER BEAM ENERGY HARVESTERS
SENSOR DESIGN FOR PIEZOELECTRIC CANTILEVER BEAM ENERGY HARVESTERS Michael I. Friswell and Sondipon Adhikari School of Engineering Swansea University Singleton Park, Swansea SA2 8PP, UK E-mail: m.i.friswell@swansea.ac.uk;
More informationABSTRACT Modal parameters obtained from modal testing (such as modal vectors, natural frequencies, and damping ratios) have been used extensively in s
ABSTRACT Modal parameters obtained from modal testing (such as modal vectors, natural frequencies, and damping ratios) have been used extensively in system identification, finite element model updating,
More informationNon-linear Modal Behaviour in Cantilever Beam Structures
Non-linear Modal Behaviour in Cantilever Beam Structures Thamthada Suwanwong and Paul.W.Bland* Department of Mechanical Engineering Simulation & Design, The Sirindhorn International Thai-German Graduate
More informationIMPROVEMENT OF A STRUCTURAL MODIFICATION METHOD
MPROVEMENT OF A STRUCTURAL MODFCATON METHOD USNG DATA EXPANSON AND MODEL REDUCTON TECHNQUES Mathieu Corus,Etienne Balmès EDF DR&D, 1 Avenue du Général De Gaule, 92141 Clamart Cedex, France ECP, MSSMat,
More informationSensitivity analysis and its application for dynamic improvement
SaÅdhanaÅ, Vol. 25, Part 3, June 2000, pp. 291±303. # Printed in India Sensitivity analysis and its application for dynamic improvement NOBUYUKI OKUBO and TAKESHI TOI Department of Precision Mechanics,
More informationVIBRATION ENERGY FLOW IN WELDED CONNECTION OF PLATES. 1. Introduction
ARCHIVES OF ACOUSTICS 31, 4 (Supplement), 53 58 (2006) VIBRATION ENERGY FLOW IN WELDED CONNECTION OF PLATES J. CIEŚLIK, W. BOCHNIAK AGH University of Science and Technology Department of Robotics and Mechatronics
More informationDYNAMICS OF MACHINERY 41514
DYNAMICS OF MACHINERY 454 PROJECT : Theoretical and Experimental Modal Analysis and Validation of Mathematical Models in Multibody Dynamics Holistic Overview of the Project Steps & Their Conceptual Links
More informationExperimental Modal Analysis and Computational Model Updating of a Car Body in White
Proc. of ISMA2004; Leuven, Belgium; 2004 Experimental Modal Analysis and Computational Model Updating of a Car Body in White C. Schedlinski 1), F. Wagner 1), K. Bohnert 2), J. Frappier 3), A. Irrgang 4),
More informationStudy on the influence of design parameter variation on the dynamic behaviour of honeycomb sandwich panels
Study on the influence of design parameter variation on the dynamic behaviour of honeycomb sandwich panels Stijn Debruyne 2, Dirk Vandepitte 1, Eric Debrabandere 2, Marc Hongerloot 2 1 Department of Mechanical
More informationFEM Updating for Offshore Jacket Structures Using Measured Incomplete Modal Data
INTERNATIONAL JOURNAL OF MARITIME TECHNOLOG IJMT Vol.5/ Winter 0 (-) Available online at: http://ijmt.ir/browse.php?a_code=a--7-3&sid=&slc_lang=en FEM Updating for Offshore Jacket Structures Using Measured
More informationSTUDY OF THE EFFECT OF COMPOSITE CONSTRAINED LAYERS IN VIBRATION DAMPING OF PLATES
Int. J. of Applied Mechanics and Engineering, 214, vol.19, No.1, pp.23-29 DOI: 1.2478/ijame-214-15 Brief note STUDY OF THE EFFECT OF COMPOSITE CONSTRAINED LAYERS IN VIBRATION DAMPING OF PLATES K.S.K. SASIKUMAR
More informationParameter identification of a printed circuit board structure using model updating and scanning laser vibrometer measurements
Parameter identification of a printed circuit board structure using model updating and scanning laser vibrometer measurements Z. Huang 1, C. Zang 1, M.I. Friswell 2 1 Jiangsu Province Key Laboratory of
More informationStructural System, Machines and Load Cases
Machine-Induced Vibrations Machine-Induced Vibrations In the following example the dynamic excitation of two rotating machines is analyzed. A time history analysis in the add-on module RF-DYNAM Pro - Forced
More informationStructural Dynamics. Spring mass system. The spring force is given by and F(t) is the driving force. Start by applying Newton s second law (F=ma).
Structural Dynamics Spring mass system. The spring force is given by and F(t) is the driving force. Start by applying Newton s second law (F=ma). We will now look at free vibrations. Considering the free
More informationVIBRATION ANALYSIS OF AN AUTOMOTIVE SILENCER
VIBRATION ANALYSIS OF AN AUTOMOTIVE SILENCER K. R. Gadre PG Student, Department Mechanical Engg., Sinhgad College of Engineering, Pune T. A. Jadhav Associate Professor, Department Mechanical Engg, Sinhgad
More informationUsing SDM to Train Neural Networks for Solving Modal Sensitivity Problems
Using SDM to Train Neural Networks for Solving Modal Sensitivity Problems Brian J. Schwarz, Patrick L. McHargue, & Mark H. Richardson Vibrant Technology, Inc. 18141 Main Street Jamestown, California 95327
More informationAnalysis of the Temperature Influence on a Shift of Natural Frequencies of Washing Machine Pulley
American Journal of Mechanical Engineering, 2015, Vol. 3, No. 6, 215-219 Available online at http://pubs.sciepub.com/ajme/3/6/12 Science and Education Publishing DOI:10.12691/ajme-3-6-12 Analysis of the
More informationResponse Spectrum Analysis Shock and Seismic. FEMAP & NX Nastran
Response Spectrum Analysis Shock and Seismic FEMAP & NX Nastran Table of Contents 1. INTRODUCTION... 3 2. THE ACCELEROGRAM... 4 3. CREATING A RESPONSE SPECTRUM... 5 4. NX NASTRAN METHOD... 8 5. RESPONSE
More informationIOMAC' May Guimarães - Portugal IMPACT-SYNCHRONOUS MODAL ANALYSIS (ISMA) AN ATTEMPT TO FIND AN ALTERNATIVE
IOMAC'13 5 th International Operational Modal Analysis Conference 2013 May 13-15 Guimarães - Portugal IMPACT-SYNCHRONOUS MODAL ANALYSIS (ISMA) AN ATTEMPT TO FIND AN ALTERNATIVE Abdul Ghaffar Abdul Rahman
More informationNoise Reduction of an Electrical Motor by Using a Numerical Model
Noise Reduction of an Electrical Motor by Using a Numerical Model Ahmet Ali Uslu Arcelik A.S. R&D Department, Vibration & Acoustic Technologies Laboratory, Istanbul, Turkey. Summary Electrical motor is
More informationExperimental and Numerical Modal Analysis of a Compressor Mounting Bracket
IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) e-issn: 2278-1684,p-ISSN: 2320-334X, Volume 14, Issue 1 Ver. VI (Jan. - Feb. 2017), PP 01-07 www.iosrjournals.org Experimental and Numerical
More informationNonlinear system identification with the use of describing functions a case study
Nonlinear system identification with the use of describing functions a case study Zhongge Zhao 1, Chuanri Li 2, Kjell Ahlin 3, Huan Du 4 1, 2, 4 School of Reliability and System Engineering, Beihang University,
More informationLectures on. Engineering System Identification ( Lund University, Spring 2015)
Lectures on Engineering System Identification ( Lund University, Spring 2015) Lecture 2: Elements of System Identification, Identification Process and Examples!!! Instructor: K. C. Park, University of
More informationDYNAMIC MODELING OF SPOT WELDS USING THIN LAYER INTERFACE THEORY
Hamid Ahmadian: 1 DYNAMIC MODELING OF SPOT WELDS USING THIN LAYER INTERFACE THEORY H. Ahmadian 1, H. Jalali 1, JE Mottershead 2, MI Friswell 3 1 Iran University of Science and Technology, Faculty of Mechanical
More informationVibration Analysis of Radial Drilling Machine Structure Using Finite Element Method
Advanced Materials Research Online: 2012-02-27 ISSN: 1662-8985, Vols. 472-475, pp 2717-2721 doi:10.4028/www.scientific.net/amr.472-475.2717 2012 Trans Tech Publications, Switzerland Vibration Analysis
More informationStructural Dynamics Model Calibration and Validation of a Rectangular Steel Plate Structure
Structural Dynamics Model Calibration and Validation of a Rectangular Steel Plate Structure Hasan G. Pasha, Karan Kohli, Randall J. Allemang, Allyn W. Phillips and David L. Brown University of Cincinnati
More informationGrandstand Terraces. Experimental and Computational Modal Analysis. John N Karadelis
Grandstand Terraces. Experimental and Computational Modal Analysis. John N Karadelis INTRODUCTION Structural vibrations caused by human activities are not known to be particularly damaging or catastrophic.
More informationSimple Experiments to Validate Modal Substructure Models
Simple Experiments to Validate Modal Substructure Models Mathew S. Allen & Daniel C. Kammer Department of Engineering Physics University of Wisconsin Madison, WI 53706 msallen@engr.wisc.edu, kammer@wisc.edu
More informationStructural Dynamics Modification and Modal Modeling
SEM Handboo of Experimental Structural Dynamics - Structural Dynamics Modification and Modal Modeling Structural Dynamics Modification and Modal Modeling Structural Dynamics Modification (SDM) also nown
More informationNV-TECH-Design: Scalable Automatic Modal Hammer (SAM) for structural dynamics testing
NV-TECH-Design: Scalable Automatic Modal Hammer (SAM) for structural dynamics testing NV-TECH-Design Scalable Automatic Modal Hammer (SAM) für structural testing. Patent number: DE 10 2015 110 597.7 Description
More informationAmbient vibration-based investigation of the "Victory" arch bridge
Ambient vibration-based investigation of the "Victory" arch bridge C. Gentile and N. Gallino Polytechnic of Milan, Department of Structural Engineering, Milan, Italy ABSTRACT: The paper summarizes the
More informationVibration Dynamics and Control
Giancarlo Genta Vibration Dynamics and Control Spri ringer Contents Series Preface Preface Symbols vii ix xxi Introduction 1 I Dynamics of Linear, Time Invariant, Systems 23 1 Conservative Discrete Vibrating
More informatione jωt = cos(ωt) + jsin(ωt),
This chapter introduces you to the most useful mechanical oscillator model, a mass-spring system with a single degree of freedom. Basic understanding of this system is the gateway to the understanding
More informationOn the use of measured rotational responses in structural dynamic analysis
Journal of Physics: Conference Series PAPER OPEN ACCESS On the use of measured rotational responses in structural dynamic analysis To cite this article: Tiago A N Silva et al 2018 J. Phys.: Conf. Ser.
More informationNonparametric identification of added masses in frequency domain: a numerical study
IPPT Reports 4f/2013 1 Nonparametric identification of added masses in frequency domain: a numerical study Grzegorz Suwała 1, Jan Biczyk 2, Łukasz Jankowski 1,* 1 Institute of Fundamental Technological
More informationFINITE ELEMENT ANALYSIS OF BEAM
YMCA University of Science & Technology, Faridabad, Haryana, Oct 9-, FINITE ANALYSIS OF Hasan Zakir Jafri, I.A. Khan, S.M. Muzakkir, Research Scholar, Faculty of Engineering & Technology, Jamia Millia
More informationIdentification of damage in a beam structure by using mode shape curvature squares
Shock and Vibration 17 (2010) 601 610 601 DOI 10.3233/SAV-2010-0551 IOS Press Identification of damage in a beam structure by using mode shape curvature squares S. Rucevskis and M. Wesolowski Institute
More informationPerformance of various mode indicator functions
Shock and Vibration 17 (2010) 473 482 473 DOI 10.3233/SAV-2010-0541 IOS Press Performance of various mode indicator functions M. Radeş Universitatea Politehnica Bucureşti, Splaiul Independenţei 313, Bucureşti,
More informationApplication of frequency response curvature method for damage detection in beam and plate like structures
IOP Conference Series: Materials Science and Engineering PAPER OPEN ACCESS Application of frequency response curvature method for damage detection in beam and plate like structures To cite this article:
More informationModel Updating for a 183m of Reinforced Concrete Chimney M Garcia-Diéguez a, K-Y Koo b, CM Middleton b, JMW Brownjohn b, C Goddard c
Proceedings of the IMAC-VIII February 4, 200, Jacksonville, Florida USA 200 Society for Experimental Mechanics Inc. Model Updating for a 83m of Reinforced Concrete Chimney M Garcia-Diéguez a, K- Koo b,
More informationFinite Element Model Updating Using the Separable Shadow Hybrid Monte Carlo Technique
Finite Element Model Updating Using the Separable Shadow Hybrid Monte Carlo Technique I. Boulkaibet a, L. Mthembu a, T. Marwala a, M. I. Friswell b, S. Adhikari b a The Centre For Intelligent System Modelling
More informationIDENTIFICATION OF THE ELASTIC PROPERTIES ON COMPOSITE MATERIALS AS A FUNCTION OF TEMPERATURE
IDENTIFICATION OF THE ELASTIC PROPERTIES ON COMPOSITE MATERIALS AS A FUNCTION OF TEMPERATURE Hugo Sol, hugos@vub.ac.be Massimo Bottiglieri, Massimo.Bottiglieri@vub.ac.be Department Mechanics of Materials
More informationOperational mode-shape normalisation with a structural modification for small and light structures
Operational mode-shape normalisation with a structural modification for small and light structures Domen Rovšček a, Janko Slavič a, Miha Boltežar a a Laboratory for Dynamics of Machines and Structures,
More informationUniversity of Bristol - Explore Bristol Research
delli Carri, A., Weekes, B., Di Maio, D., & Ewins, D. J. (2017). Extending modal testing technology for model validation of engineering structures with sparse nonlinearities: A first case study. Mechanical
More informationDynamic Stress Analysis of a Bus Systems
Dynamic Stress Analysis of a Bus Systems *H. S. Kim, # Y. S. Hwang, # H. S. Yoon Commercial Vehicle Engineering & Research Center Hyundai Motor Company 772-1, Changduk, Namyang, Whasung, Kyunggi-Do, Korea
More informationEXPERIMENTAL MODAL ANALYSIS (EMA) OF A SPINDLE BRACKET OF A MINIATURIZED MACHINE TOOL (MMT)
5 th International & 26 th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2014) December 12 th 14 th, 2014, IIT Guwahati, Assam, India EXPERIMENTAL MODAL ANALYSIS (EMA) OF A
More informationStructural Dynamic Behavior of a High-Speed Milling Machine
Structural Dynamic Behavior of a High-Speed Milling Machine FEA Vs. EMA Assessment * J. Rotberg, ** B. Bork * "Technion" I.I.T ** Technische Universitat Darmstadt Faculty of Mechanical Eng. PTW Institut
More informationAn Inverse Approach for the Determination of Viscous Damping Model of Fibre Reinforced Plastic Beams using Finite Element Model Updating
An Inverse Approach for the Determination of Viscous Damping Model of Fibre Reinforced Plastic Beams using Finite Element Model Updating Subhajit Mondal and Sushanta Chakraborty Department of Civil Engineering,
More informationEXPERIMENTAL EVALUATION OF THE MODAL DAMPING OF AUTOMOTIVE COMPONENTS WITH DIFFERENT BOUNDARY CONDITIONS
ICSV14 Cairns Australia 9-12 July, 2007 EXPERIMENTAL EVALUATION OF THE MODAL DAMPING OF AUTOMOTIVE COMPONENTS WITH DIFFERENT BOUNDARY CONDITIONS Giorgio Dalpiaz 1, Emiliano Mucchi 1 and Stefano Mischiari
More informationMeasurement Techniques for Engineers. Motion and Vibration Measurement
Measurement Techniques for Engineers Motion and Vibration Measurement Introduction Quantities that may need to be measured are velocity, acceleration and vibration amplitude Quantities useful in predicting
More informationEXPERIMENTAL IDENTIFICATION OF A NON-LINEAR BEAM, CONDITIONED REVERSE PATH METHOD
EXPERIMENAL IDENIFICAION OF A NON-LINEAR BEAM, CONDIIONED REVERSE PAH MEHOD G. Kerschen, V. Lenaerts and J.-C. Golinval Université de Liège, LAS Vibrations et identification des structures, Chemin des
More informationAnalysis of Tensioner Induced Coupling in Serpentine Belt Drive Systems
2008-01-1371 of Tensioner Induced Coupling in Serpentine Belt Drive Systems Copyright 2007 SAE International R. P. Neward and S. Boedo Department of Mechanical Engineering, Rochester Institute of Technology
More informationStructural changes detection with use of operational spatial filter
Structural changes detection with use of operational spatial filter Jeremi Wojcicki 1, Krzysztof Mendrok 1 1 AGH University of Science and Technology Al. Mickiewicza 30, 30-059 Krakow, Poland Abstract
More informationModal and Static Structural Analysis of Exhaust Collector Box for Compressor test facility
Modal and Static Structural Analysis of Exhaust Collector Box for Compressor test facility Shankar Gouda 1, Praveen M P 2 P G student, Department of Mechanical Engineering, EPCET, Bangalore, Karnataka,
More informationInternational Journal of Advance Engineering and Research Development
Scientific Journal of Impact Factor (SJIF): 4.72 International Journal of Advance Engineering and Research Development Volume 4, Issue 11, November -2017 e-issn (O): 2348-4470 p-issn (P): 2348-6406 Study
More informationVirtual distortions applied to structural modelling and sensitivity analysis. Damage identification testing example
AMAS Workshop on Smart Materials and Structures SMART 03 (pp.313 324) Jadwisin, September 2-5, 2003 Virtual distortions applied to structural modelling and sensitivity analysis. Damage identification testing
More informationIOMAC'15 6 th International Operational Modal Analysis Conference
IOMAC'15 6 th International Operational Modal Analysis Conference 2015 May12-14 Gijón - Spain COMPARISON OF DIFFERENT TECHNIQUES TO SCALE MODE SHAPES IN OPERATIONAL MODAL ANALYSIS. Luis Borja Peral Mtnez
More informationModel Updating: A Tool for Reliable Modelling, Design Modification and Diagnosis
Articles Model Updating: A ool for Reliable Modelling, Design Modification and Diagnosis Jyoti K. Sinha * and Michael I. Friswell # ABSRAC Finite element model updating has become a mature area of research,
More informationOptimal sensor placement for detection of non-linear structural behavior
Optimal sensor placement for detection of non-linear structural behavior R. Castro-Triguero, M.I. Friswell 2, R. Gallego Sevilla 3 Department of Mechanics, University of Cordoba, Campus de Rabanales, 07
More informationInterval model updating: method and application
Interval model updating: method and application H. Haddad Khodaparast, J.E. Mottershead, K.J. Badcock University of Liverpool, School of Engineering, Harrison-Hughes Building, The Quadrangle, L69 3GH,
More information1618. Dynamic characteristics analysis and optimization for lateral plates of the vibration screen
1618. Dynamic characteristics analysis and optimization for lateral plates of the vibration screen Ning Zhou Key Laboratory of Digital Medical Engineering of Hebei Province, College of Electronic and Information
More informationAN ALTERNATIVE APPROACH TO SOLVE THE RAILWAY MAINTENANCE PROBLEM
AN ALERNAIVE APPROACH O SOLVE HE RAILWAY MAINENANCE PROBLEM Giancarlo Fraraccio, ENEA centro ricerca CASACCIA, FIM-MA-QUAL Italy Gerardo De Canio, ENEA centro ricerca CASACCIA, FIM-MA-QUAL Italy Gianni
More informationUpdating a Finite Element Based Structural Model of a Small Flexible Aircraft
Updating a Finite Element Based Structural Model of a Small Flexible Aircraft Abhineet Gupta, Claudia P. Moreno, Harald Pfifer, and Gary J. Balas Aerospace Engineering and Mechanics, University of Minnesota,
More informationFinite Element Modules for Demonstrating Critical Concepts in Engineering Vibration Course
Finite Element Modules for Demonstrating Critical Concepts in Engineering Vibration Course Shengyong Zhang Assistant Professor of Mechanical Engineering College of Engineering and Technology Purdue University
More informationTHE APPLICATION OF THE IRS AND BALANCED REALIZATION METHODS TO OBTAIN REDUCED MODELS OF STRUCTURES WITH LOCAL NON-LINEARITIES
Journal of Sound and Vibration (1996) 196(4), 453 468 THE APPLICATION OF THE IRS AND BALANCED REALIZATION METHODS TO OBTAIN REDUCED MODELS OF STRUCTURES WITH LOCAL NON-LINEARITIES M. I. FRISWELL Department
More informationModeling and Performance Analysis of a Flywheel Energy Storage System Prince Owusu-Ansah, 1, Hu Yefa, 1, Philip Agyeman, 1 Adam Misbawu 2
International Conference on Electromechanical Control Technology and Transportation (ICECTT 2015) Modeling and Performance Analysis of a Flywheel Energy Storage System Prince Owusu-Ansah, 1, Hu Yefa, 1,
More informationDynamic (Vibrational) and Static Structural Analysis of Ladder Frame
Dynamic (Vibrational) and Static Structural Analysis of Ladder Frame Ketan Gajanan Nalawade 1, Ashish Sabu 2, Baskar P 3 School of Mechanical and building science, VIT University, Vellore-632014, Tamil
More informationVIBRATION AND DAMPING ANALYSIS OF FIBER REINFORCED COMPOSITE MATERIAL CONICAL SHELLS
VIBRATION AND DAMPING ANALYSIS OF FIBER REINFORCED COMPOSITE MATERIAL CONICAL SHELLS Mechanical Engineering Department, Indian Institute of Technology, New Delhi 110 016, India (Received 22 January 1992,
More informationProgram System for Machine Dynamics. Abstract. Version 5.0 November 2017
Program System for Machine Dynamics Abstract Version 5.0 November 2017 Ingenieur-Büro Klement Lerchenweg 2 D 65428 Rüsselsheim Phone +49/6142/55951 hd.klement@t-online.de What is MADYN? The program system
More informationDesign of the Deployment Mechanism of Solar Array on a Small Satellite
American Journal of Mechanical Engineering, 2013, Vol. 1, No. 3, 66-72 Available online at http://pubs.sciepub.com/ajme/1/3/2 Science and Education Publishing DOI:10.12691/ajme-1-3-2 Design of the Deployment
More information