Verso il VIM4? La situazione delle attività del JCGM / WG2 (VIM) Luca Mari.
|
|
- Shavonne George
- 6 years ago
- Views:
Transcription
1 Verso il VIM4? La situazione delle attività del JCGM / WG2 (VIM) Luca Mari lmari@liuc.it XXXIII Giornata della Misurazione, Roma 2014
2 Trent anni dopo...
3 The context: JCGM and its products Metrology: a moving target Towards the VIM4
4 Joint Committee for Guides in Metrology (JCGM) (established in 1997) (BIPM) Int.l Bureau of Weights and Measures (IEC) Int.l Electrotechnical Commission (IFCC) Int.l Federation of Clinical Chemistry and Laboratory Medicine (ILAC) Int.l Laboratory Accreditation Cooperation (ISO) Int.l Organization for Standardization (IUPAC) Int.l Union of Pure and Applied Chemistry (IUPAP) Int.l Union of Pure and Applied Physics (OIML) Int.l Organization of Legal Metrology
5 The scope of JCGM metrology: : «science of measurement and its application» no principled constraints on the object of measurement...
6 JCGM guidance documents VIM GUM vim.html gum.html
7 The VIM...
8 ... is only a vocabulary but let us compare it, e.g., with Electropedia
9 Searching Electropedia for sensitivity :
10 The hypothesis underlying the JCGM (including IEC...) endeavor is that today: the basic concepts of metrology can be consistently and univocally defined such a system of definitions is useful for many classes of readers «This Vocabulary is meant to be a common reference for scientists and engineers including physicists, chemists, medical scientists as well as for both teachers and practitioners involved in planning or performing measurements, irrespective of the level of measurement uncertainty and irrespective of the field of application. It is also meant to be a reference for governmental and inter- governmental bodies, trade associations, accreditation bodies, regulators, and professional societies.» [VIM3: Scope]
11 VIM1 International vocabulary of basic and general terms in metrology 1984 (with corrections: 1987) ISO: standardization IEC: standardization BIPM: fundamental metrology OIML: legal metrology VIM1 1984
12 VIM2 International vocabulary of basic and general terms in metrology 1993 [ISO Guide 99:1993] ISO: standardization IEC: standardization VIM BIPM: fundamental metrology VIM ISO/TAG 4 OIML: legal metrology IUPAP: physics IUPAC: chemistry IFCC: clinical chemistry laboratory medicine
13 VIM3 International vocabulary of metrology Basic and general concepts and associated terms 2007 (with corrections: 2012) [JCGM 200:2012] ISO: standardization IEC: standardization VIM ILAC: accreditation BIPM: fundamental metrology VIM JCGM OIML: legal metrology IFCC: clinical chemistry laboratory medicine VIM3 IUPAC: chemistry 2007 IUPAP: physics
14 The VIM3+A (?)
15 The VIMs as witnesses of change The VIMs can be considered as conceptual and lexical snapshots, taken from a conservative viewpoint (the existing widespread metrological infrastructure, standards, accreditation procedures, have to be maintained) from a political viewpoint (changes require the consensus of all Member Organizations) and nevertheless some interesting changes can be found from the VIM1, mainly reflecting the traditional standpoint to the VIM3 and now towards the VIM4
16 The context: JCGM and its products Metrology: a moving target What is measurable? What is measured? What is measurement? Towards the VIM4
17 From the VIM1 to the VIM3: some fundamental changes What is measurable? The traditional position: Measurability is a feature of empirical properties that can be compared with each other in terms of their ratio
18 Properties and quantities The VIM1 adopts the traditional position and presents it in reference to quantities,, by assuming that: 1. quantities are specific properties 2. only quantities are measurable property VIM1 measurable property = quantity The status of ordinal properties remains (undefined and) ambiguous here...
19 Properties and quantities again The VIM3 maintains the VIM1 assumptions, but defines ordinal properties as ordinal quantities An ordinal quantity is a «quantity, defined by a conventional measurement procedure, for which a total ordering relation can be established, according to magnitude, with other quantities of the same kind, but for which no algebraic operations among those quantities exist» property VIM3 nominal property measurable property = quantity ordinal quantity quantity expressed by a measurement unit
20 From the VIM1 to the VIM3: some fundamental changes What is measured? The traditional position: Measurement conveys uninterpreted information on the empirical property in input to the measuring instrument
21 Measurands The VIM1 adopts the traditional position and presents it in reference to measurands,, by assuming that: 1. measurement is a «set of operations having the object of determining the value» of a measurand 2. a measurand is a «quantity subjected to measurement» VIM1 object under measurement measurand measuring system measurement result
22 Measurands again The VIM3 redefines measurand as a «quantity intended to be measured» object under measurement VIM3 quantity subject to measurement experimental component model-based component measurement result attributed to measurand The idea: we do our best to let the measuring system interact with the quantity we want to measure, but the measurement result will be attributed to the quantity as we have defined it, not to the (unknown) quantity with which the instrument actually interacted
23 From the VIM1 to the VIM3: some fundamental changes What is measurement? The traditional position: Measurement is a purely experimental process
24 Measurement The VIM1 adopts the traditional position and presents it in reference to measurement,, by assuming that: 1. it is a determination process whose outcome preexists to measurement itself 2. the measurand has a single value VIM1 Measurement is aimed at «determining the value of a quantity»
25 Measurement again The VIM3 redefines measurement as a «process of experimentally obtaining one or more quantity values that can reasonably be attributed to a quantity» VIM3 How can this reasonable attribution be obtained?
26 The context: JCGM and its products Metrology: a moving target Towards the VIM4
27 Towards the VIM4 The current edition of the VIM is still a half refined document: the JCGM is expecting a first public draft of the next edition by 2018 At the moment the only formal requirement of the JCGM is to better integrate nominal properties and the related concepts
28 E il momento giusto per proporre soluzioni per alcuni problemi di base...
29 1. In vista del VIM4 la composizione del JCGM potrebbe / dovrebbe essere utilmente estesa ad altre organizzazioni? 2. I concetti di base della metrologia possono davvero essere definiti in modo consistente e univoco? 3. Ha senso trattare in uno stesso documento concetti relativi a proprietà classificatorie e grandezze, e come farlo? 4. Per quali utenti è scritto il VIM, e quindi in particolare quali precompetenze si può ipotizzare che abbia il suo utente tipo? 5. Il VIM4 dovrebbe rimanere un vocabolario, o dovrebbe diventare un ontologia? Dovrebbe includere una narrazione? 6. Data la composizione del JCGM, la componente accademica è quasi del tutto ininfluente nello sviluppo del VIM: ha invece senso che riesca a dare il suo contributo, e come?
30 THANK YOU FOR YOUR KIND ATTENTION Luca Mari
Outline of the current status of measurement science: from the point of view of the International Vocabulary of Metrology (VIM)
Outline of the current status of measurement science: from the point of view of the International Vocabulary of Metrology (VIM) Luca Mari Università Cattaneo LIUC, Italy BEAR Seminar, University of California,
More informationCan there be a metrology for psychometricians?
Can there be a metrology for psychometricians? Luca Mari Università Cattaneo LIUC, Italy BEAR Seminar, University of California, Berkeley Tuesday, January 31, 2017 Abstract Metrology -- the science of
More informationWorkshops. Thursday, November 21, 9:00 AM to 11:00 AM: Models of measurement: measuring systems and metrological infrastructure
Workshops Wednesday, November 20, 12:00 PM to 2:00 PM: Models of measurement: the general structure Thursday, November 21, 9:00 AM to 11:00 AM: Models of measurement: measuring systems and metrological
More informationRevision of the Guide to the expression of uncertainty in measurement impact on national metrology institutes and industry
Revision of the Guide to the expression of uncertainty in measurement impact on national metrology institutes and industry Maurice Cox/Peter Harris National Physical Laboratory, Teddington, UK CCRI BIPM,
More informationGuide to the Expression of Uncertainty in Measurement (GUM) and its supplemental guides
National Physical Laboratory Guide to the Expression of Uncertainty in Measurement (GUM) and its supplemental guides Maurice Cox National Physical Laboratory, UK maurice.cox@npl.co.uk http://www.npl.co.uk/ssfm/index.html
More informationA guide to expression of uncertainty of measurements QA4EO-QAEO-GEN-DQK-006
A guide to expression of uncertainty of measurements QA4EO-QAEO-GEN-DQK-006 A guide to expression of uncertainty of measurements Author: E-mail: Nigel Fox Nigel.Fox@npl.co.uk Editor: E-mail: Marie-Claire
More informationAPPENDIX G EVALUATION OF MEASUREMENT UNCERTAINTY
APPENDIX G EVALUATION OF MEASUREMENT UNCERTAINTY Table of Contents 1. SCOPE... 2 2. REFERENCES... 2 3. TERMS AND DEFINITIONS... 2 4. BACKGROUND... 4 5. EVALUATION OF MEASUREMENT UNCERTAINTY POLICY... 5
More informationIncertezza di misura: concetti di base e applicazioni
Incertezza di misura: concetti di base e applicazioni Walter Bich L incertezza di misura nelle prove di preconformità per compatibilità elettromagnetica, Politecnico Di Torino, 17 Giugno 2010 Qualche data
More informationAPPENDIX G ESTIMATION OF UNCERTAINTY OF MEASUREMENT
APPENDIX G ESTIMATION OF UNCERTAINTY OF MEASUREMENT Table of Contents 1. SCOPE... 2 2. REFERENCES... 2 3. TERMS AND DEFINITIONS... 2 4. BACKGROUND... 4 5. ESTIMATION OF UNCERTAINTY OF MEASUREMENT POLICY...
More informationPHYSICAL METHODS, INSTRUMENTS AND MEASUREMENTS - Measurement Science And Its Evolution - Luca Mari MEASUREMENT SCIENCE AND ITS EVOLUTION
MEASUREMENT SCIENCE AND ITS EVOLUTION Luca Mari Università Cattaneo LIUC, Italy Keywords: objectivity and inter-subjectivity, measuring systems, calibration, measurement standards, quantities and units,
More informationOIML G GUIDE. Edition 2009 (E) ORGANISATION INTERNATIONALE INTERNATIONAL ORGANIZATION
GUIDE OIML G 1-104 Edition 2009 (E) Evaluation of measurement data An introduction to the Guide to the expression of uncertainty in measurement and related documents Évaluation des données de mesure Une
More informationJoint Committee for Traceability in Laboratory Medicine Terminology. R. Wielgosz and S. Maniguet
Joint Committee for Traceability in Laboratory Medicine Terminology R. Wielgosz and S. Maniguet Terminology 1. Understanding the words and phrases we are using 2. Terminology in ISO standards 3. Vocabulary
More informationHOW TO EXPRESS THE RELIABILITY OF MEASUREMENT RESULTS. The role of metrological traceability and measurement uncertainty-
HOW TO EXPRESS THE RELIABILITY OF MEASUREMENT RESULTS The role of metrological traceability and measurement - H. Imai 1 1 National Metrology Institute of Japan (NMIJ), National Institute of Advanced Industrial
More informationGUIDE Uncertainty of measurement Part 3: Guide to the expression of uncertainty in measurement (GUM:1995)
GUIDE 98-3 Uncertainty of measurement Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) Incertitude de mesure Partie 3: Guide pour l'expression de l'incertitude de mesure (GUM:1995)
More informationSAMM POLICY 5 (SP5) POLICY ON MEASUREMENT UNCERTAINTY REQUIREMENTS FOR SAMM TESTING LABORATORIES Issue 2, 28 February 2007 (Amd. 1, 11 August 2014)
SKIM AKREDITASI MAKMAL MALAYSIA (SAMM) LABORATORY ACCREDITATION SCHEME OF MALAYSIA SAMM POLICY 5 (SP5) POLICY ON MEASUREMENT UNCERTAINTY REQUIREMENTS FOR SAMM TESTING LABORATORIES Issue 2, 28 February
More informationFORCE STANDARDS COMPARISON BETWEEN PTB (GERMANY) AND CENAM (MEXICO).
FORCE STANDARDS COMPARISON BETWEEN PTB (GERMANY) AND CENAM (MEXICO). Jorge C. Torres-Guzmán*, Amritlal Sawla**, Daniel Ramírez-Ahedo* * Centro Nacional de Metrología, México. **Physikalisch-Technische
More informationDETERMINATION OF THE TYPE B STANDARD UNCERTAINTY SY oktobar 2015.
DETERMINATION OF THE TYPE B STANDARD UNCERTAINTY SY410 22. oktobar 2015. Goran Kostić Abstract. The type B standard uncertainty is determined when there is not enough measurement data to calculate the
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 6980-2 Première edition 2004-10-15 Nuclear energy Reference beta-particle radiation Part 2: Calibration fundamentals related to basic quantities characterizing the radiation
More informationJCGM 100:2008 GUM 1995 with minor corrections. Evaluation of measurement data Guide to the expression of uncertainty in measurement
JCGM 100:008 GUM 1995 with minor corrections Evaluation of measurement data Guide to the expression of uncertainty in measurement Évaluation des données de mesure Guide pour l expression de l incertitude
More informationTEACHING PHYSICS IN LAB WITH DUE IMPORTANCE TO UNCERTAINTY IN MEASUREMENT
TEACHING PHYSICS IN LAB WITH DUE IMPORTANCE TO UNCERTAINTY IN MEASUREMENT D A Desai E-mail id: ddesai14@ gmail.com Abstract Major changes in definitions of some concepts about uncertainty in measurement
More informationMEASUREMENT UNCERTAINTY AND SUMMARISING MONTE CARLO SAMPLES
XX IMEKO World Congress Metrology for Green Growth September 9 14, 212, Busan, Republic of Korea MEASUREMENT UNCERTAINTY AND SUMMARISING MONTE CARLO SAMPLES A B Forbes National Physical Laboratory, Teddington,
More informationAnnex xxx General guidelines for the assessment of uncertainties in solar thermal systems performance testing
Annex xxx General guidelines for the assessment of uncertainties in solar thermal systems performance testing 1 Introduction The expected energy output presents the most important quantity, within those
More informationAn Introduction to The Guide to the Expression of Uncertainty in Measurement
An Introduction to The Guide to the Expression of Uncertainty in Measurement David MARTIN, France Key words: Quality, Traceability, Uncertainty, GUM SUMMARY Organisations are created to fulfil some need.
More informationInconsistencies. External With respect to Supplement 1 and the other documents being developed according to a consistent conceptual framework.
La GUM del terzo millennio? Walter Bich, INRIM XXVII GIORNATA DELLA MISURAZIONE Roma 19-20 giugno 2008 Date 1993: pubblicazione della GUM 1995: ristampa con correzioni editoriali 15 gennaio 2008: pubblicazione
More informationDocument No: TR 12 Issue No: 1
ESTIMATION OF THE UNCERTAINTY OF MEASUREMENT BY CALIBRATION LABORATORIES AND SPECIFICATION OF CALIBRATION AND MEASUREMENT CAPABILITY ON SCHEDULES OF ACCREDITATION Prepared by: SADCAS Technical Manage Approved
More informationGuide to the Expression of Uncertainty in Measurement Supplement 1 Numerical Methods for the Propagation of Distributions
Guide to the Expression of Uncertainty in Measurement Supplement 1 Numerical Methods for the Propagation of Distributions This version is intended for circulation to the member organizations of the JCGM
More informationGNSS CORS Calibration and Testing
David MARTIN, France Key words: GNSS, CORS, testing, calibration, traceability, GUM SUMMARY Global Navigation Satellite System (GNSS) has established itself as a predominant technique in modern surveying.
More informationOA03 UNCERTAINTY OF MEASUREMENT IN CHEMICAL TESTING IN ACCORDANCE WITH THE STANDARD SIST EN ISO/IEC Table of contents
UNCERTAINTY OF MEASUREMENT IN CHEMICAL TESTING IN ACCORDANCE WITH THE STANDARD SIST EN ISO/IEC 17025 Table of contents 1 GENERAL... 2 2 THE STANDARD SIST EN ISO/IEC 17025... 2 3 SA'S POLICY IN IMPLEMENTING
More informationIS INTERNATIONAL STANDARD. Natural gas - Guidelines to traceability in analysis
INTERNATIONAL STANDARD IS0 14111 First edition 1997-03-15 Natural gas - Guidelines to traceability in analysis Gaz na turel - Lignes directrices pour la tracabilit6 en analyse Reference number IS0 14111
More informationCalibration and verification: Two procedures having comparable objectives and results
Calibration and verification: Two procedures having comparable objectives and results KLAUS-DIETER SOMMER, Landesamt für Messund Eichwesen Thüringen (LMET), Germany SAMUEL E. CHAPPELL, Consultant, Formerly
More informationPractical Interpretation of Metrological Traceability on Gauge Block as to VIM 3
MAPAN - Journal Practical of Metrology Interpretation Society of Metrological India, Vol. 26, Traceability No. 1, 2011; on pp. Gauge 79-86Block as to VIM 3 ORIGINAL ARTICLE Practical Interpretation of
More informationDecision rules applied to conformity assessment
Technical Report No. 01/ 2017 January 2017 Decision rules applied to conformity assessment Technical Report 1 Impressum EUROLAB Technical Report 1/2017 Decision rules applied to conformity assessment Authors:
More informationProvläsningsexemplar / Preview INTERNATIONAL STANDARD ISO Second edition
INTERNATIONAL STANDARD ISO 17123-4 Second edition 2012-06-01 Optics and optical instruments Field procedures for testing geodetic and surveying instruments Part 4: Electro-optical distance meters (EDM
More informationTHE UNCERTAINTY OF MEASUREMENT IN CALIBRATION USING A COMPARISON FORCE STANDARD MACHINE
THE UNCERTAINTY OF MEASUREMENT IN CALIBRATION USING A COMPARISON FORCE STANDARD MACHINE Adrian Gherasimov 1, Eugen Ghita 1 Romanian Bureau of Legal Metrology, Force Laboratory Timisoara, Romania POLITEHICA
More informationR SANAS Page 1 of 7
ESTIMATION OF THE UNCERTAINTY OF MEASUREMENT BY CALIBRATION LABORATORIES AND SPECIFICATION OF CALIBRATION AND MEASUREMENT CAPABILITY ON SCHEDULES OF ACCREDITATION Approved By: Chief Executive Officer:
More informationMeasurement uncertainty and legal limits in analytical measurements
UNCERTAINTY Measurement uncertainty and legal limits in analytical measurements MIRELLA BUZOIANU, Reference Materials Laboratory, National Institute of Metrology (INM), Bucharest, Romania 1 Introduction
More informationThe GUM Supplement 1 and the Uncertainty Evaluations of EMC Measurements
The GUM Supplement 1 and the Uncertainty Evaluations of EMC Measurements Carlo F.M. Carobbi, Department of Electronics and Telecommunications Via S. Marta 3, 50139 Firenze, ITALY carlo.carobbi@unifi.it
More informationMeasurement & Uncertainty - Basic concept and its application
Measurement & Uncertainty - Basic concept and its application Feb. 7. 2012 JongOh CHOI (choijongoh@kriss.re.kr) Knowledge and measurement When you can measure what you are speaking about, and express it
More informationIntroduction to the evaluation of uncertainty
Manual of Codes of Practice for the Determination of Uncertainties in Mechanical Tests on Metallic Materials SECTION 1 Introduction to the evaluation of uncertainty F A Kandil National Physical Laboratory
More informationOIML D 28 DOCUMENT. Edition 2004 (E) ORGANISATION INTERNATIONALE INTERNATIONAL ORGANIZATION. Conventional value of the result of weighing in air
INTERNATIONAL DOCUMENT OIML D 28 Edition 2004 (E) Conventional value of the result of weighing in air Valeur conventionnelle du résultat des pesées dans l'air OIML D 28 Edition 2004 (E) ORGANISATION INTERNATIONALE
More informationISO/BIPM Guide: Uncertainty of measurement 1
ISO/BIPM Guideline: Uncertainty of measurement /6 ISO/BIPM Guide: Uncertainty of measurement Dr. Wolfgang Kessel, Braunschweig Abstract Starting from the general concept of a measuring process and the
More informationDraft EURACHEM/CITAC Guide Quantifying Uncertainty in Analytical Measurement. Second Edition. Draft: June 1999
Draft EURACHEM/CITAC Guide Quantifying Uncertainty in Analytical Measurement Second Edition Draft: June 1999 Prepared by the EURACHEM Measurement Uncertainty Working Group in collaboration with members
More informationPart 5: Total stations
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 17123-5 Third edition 2018-02 Optics and optical instruments Field procedures for testing geodetic and surveying instruments Part 5: Total stations
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 21501-2 First edition 2007-05-15 Determination of particle size distribution Single particle light interaction methods Part 2: Light scattering liquid-borne particle counter
More informationThe importance of metrological metadata in the environmental monitoring.
The importance of metrological metadata in the environmental monitoring. Márcio A. A. Santana 1, Patrícia L. O. Guimarães 1, Eugênio S. Almeida 2, Tero Eklin 3 1 INPE - Instituto Nacional de Pesquisas
More informationMEASUREMENT, MODELS, UNCERTAINTY
Paper for TIM special issue on Measurement Fundamentals MEASUREMENT, MODELS, UNCERTAINTY A. Giordani(1), L. Mari(2) # (1) Università Cattolica, Largo Gemelli, 1 20100 Milano, Italy. email: alessandro.giordani@unicatt.it,
More informationToward a harmonized treatment of nominal properties in metrology
Toward a harmonized treatment of nominal properties in metrology Luca Mari # Università Cattaneo LIUC, Italy, lmari@liuc.it Abstract This paper explores in a metrological perspective the basic characteristics
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN ISO/TS 15530-3 December 2007 ICS 17.040.30 English Version Geometrical product specifications (GPS) - Coordinate measuring machines
More informationINTERNATIONAL COMPARISON OF PLATINUM RESISTANCE THERMOMETERS BETWEEN CHILE AND ECUADOR
INTERNATIONAL COMPARISON OF PLATINUM RESISTANCE THERMOMETERS BETWEEN CHILE AND ECUADOR M. Araya 1, D. Almeida 2 1 National Laboratory of Temperature of Chile, LCPNT, Santiago, Chile 2 Ecuadorian Standardization
More informationMethod of Estimating Uncertainty of Measurement Values in Case of Measurement Methods Involving Non-Linear Calibration
Method of Estimating Uncertainty of Measurement Values in Case of Measurement Methods Involving Non-Linear Calibration Shigemi Hosogaya *1, Masato Ota *1, Yukio Ozaki *1, Katsuhiko Kuwa *2, Naotaka Hamasaki
More informationMeasurement & Uncertainty - Concept and its application
Measurement & Uncertainty - Concept and its application June. 20 2012 JongOh Choi (choijongoh@kriss.re.kr) I don t know what I don t know. If we don t express what we know in the form of numbers, we really
More informationWe are IntechOpen, the world s leading publisher of Open Access books Built by scientists, for scientists. International authors and editors
We are IntechOpen, the world s leading publisher of Open Access books Built by scientists, for scientists 4,000 116,000 120M Open access books available International authors and editors Downloads Our
More informationGuidelines for Evaluating and Expressing the Uncertainty of NIST Measurement Results
United States Department of Commerce National Institute of Standards and Technology NIST Technical Note 1297 1994 Edition Guidelines for Evaluating and Expressing the Uncertainty of NIST Measurement Results
More informationProvläsningsexemplar / Preview. First edition
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 12764 First edition 2017-08 Measurement of fluid flow in closed conduits Flowrate measurement by means of vortex shedding flowmeters inserted in
More informationMetrological Traceability & Measurement Uncertainty
Metrological Traceability & Measurement Uncertainty Prof Dr P De Bièvre Independent Consultant on Metrology in Chemistry (MiC) IUPAC-Anal Chem Div Committee WIEN 2004-02-17 intropdb2003a P De Bièvre WIEN
More informationJAB NOTE4. ESTIMATION OF MEASUREMENT UNCERTAINTY (Electrical Testing / High Power Testing) Japan Accreditation Board (JAB)
JAB NOTE4 ESTIMATION OF MEASUREMENT UNCERTAINTY (Electrical Testing / High Power Testing) nd edition: January 5 01 1 st edition: March 5 00 Japan Accreditation Board (JAB) Initial edition: 00-0-5 1/ nd
More informationUnit 4. Statistics, Detection Limits and Uncertainty. Experts Teaching from Practical Experience
Unit 4 Statistics, Detection Limits and Uncertainty Experts Teaching from Practical Experience Unit 4 Topics Statistical Analysis Detection Limits Decision thresholds & detection levels Instrument Detection
More informationQuantities and Measurement Units
RCPA-AACB Chemical Pathology Course 2018 Quantities and Measurement Units Graham White Chemical Pathology SA Pathology at Flinders Medical Centre Quantities Quantity: property of a phenomenon, body, or
More informationHOW TO ASSESS THE MEASUREMENT UNCERTAINTY
15th EFLM Continuing Postgraduate Course in Clinical Chemistry and Laboratory Medicine How to assess the quality of your method? Zagreb, 24-25 October 2015 HOW TO ASSESS THE MEASUREMENT UNCERTAINTY Centre
More informationKey Comparisons, the MRA and CMCs: An International Measurement Infrastructure. Robert Wielgosz. Bureau International des Poids et Mesures
Key Comparisons, the MRA and CMCs: An International Measurement Infrastructure Robert Wielgosz The task of the BIPM is to ensure world-wide uniformity of measurements and their traceability to the International
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 13168 First edition 2015-07-01 Water quality Simultaneous determination of tritium and carbon 14 activities Test method using liquid scintillation counting Qualité de l eau Détermination
More informationTITLE OF THE CD (English): New OIML Document
OIML TC 3/SC 5 1CD - New OIML Document COMMITTEE DRAFT OIML CD1 Date: 27 April 2009 Reference number: OIML/TC 3/SC 5/N1 Supersedes document: Not applicable OIML TC 3 / SC 5 Project p2 Title: The role of
More informationVNA error models: Comments on EURAMET/cg-12/v.01
Industrial Research Limited Report 2444 VNA error models: Comments on EURAMET/cg-12/v.01 B. D. Hall Measurement Standards Laboratory of New Zealand Lower Hutt, New Zealand 16 June 2010, (Replaces 5 May
More informationMETROLOGICAL COMPATIBILITY OF THE MEASURING RESULTS OF AQUEOUS SOLUTIONS MASS FRACTIONS BY DENSIMETRY AND REFRACTOMETRY
METROLOGICAL COMPATIBILITY OF THE MEASURING RESULTS OF AQUEOUS SOLUTIONS MASS FRACTIONS BY DENSIMETRY AND REFRACTOMETRY A. FURTADO, C. OLIVEIRA, O. PELLEGRINO, C. PEREIRA, C. MATEUS, A. QUEIRÓS, R. CONCEIÇÃO,
More informationStudy for the requalification of Inmetro's Primary Hardness Standardization Machine for Vickers HV3 scale
Journal of Physics: Conference Series PAPER OPEN ACCESS Study for the requalification of Inmetro's Primary Hardness Standardization Machine for Vickers HV3 scale To cite this article: J T Filho et al 2015
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 80000-5 First edition 2007-05-01 Quantities and units Part 5: Thermodynamics Grandeurs et unités Partie 5: Thermodynamique Reference number ISO 2007 PDF disclaimer This PDF file
More informationEssentials of expressing measurement uncertainty
Essentials of expressing measurement uncertainty This is a brief summary of the method of evaluating and expressing uncertainty in measurement adopted widely by U.S. industry, companies in other countries,
More informationCorrelation Effects in the Uncertainty Estimation of Two-Pressure Humidity Generators
Journal of Physics: Conference Series PAPER OPEN ACCESS Correlation Effects in the Uncertainty Estimation of Two-Pressure Humidity Generators To cite this article: S A Carvajal and C A Sánchez 08 J. Phys.:
More informationConsultative Committee for Units (CCU)
Bureau International des Poids et Mesures Consultative Committee for Units (CCU) Report of the 15th meeting (17 18 April 2003) to the International Committee for Weights and Measures Comité international
More informationProvläsningsexemplar / Preview INTERNATIONAL STANDARD ISO Second edition
INTERNATIONAL STANDARD ISO 6974-1 Second edition 2012-05-15 Natural gas Determination of composition and associated uncertainty by gas chromatography Part 1: General guidelines and calculation of composition
More informationA new definition of the SI for the new century
A new definition of the SI for the new century to celebrate the PTB s first 3 42 1 years = 1111101 years Presentation from Ian Mills, President of the CCU We have known for more than 50 years that the
More informationQuantifying Uncertainty in Analytical Measurement
EURACHEM / CITAC Guide Quantifying Uncertainty in Analytical Measurement Second Edition QUAM:000.P1 EURACHEM/CITAC Guide Quantifying Uncertainty in Analytical Measurement Second Edition Editors S L R Ellison
More informationEA Guidelines on the Calibration of Temperature Indicators and Simulators by Electrical Simulation and Measurement
Publication Reference EA-10/11 EA Guidelines on the Calibration of Temperature Indicators and Simulators by Electrical PURPOSE This document has been produced by EA as a means of giving advice for calibrating
More informationDetermination of particle size distribution Single particle light interaction methods. Part 4:
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 21501-4 Second edition 2018-05 Determination of particle size distribution Single particle light interaction methods Part 4: Light scattering airborne
More informationPractical and Valid Guidelines for Realistic Estimation of Measurement Uncertainty in Pesticide Multi-Residue Analysis*
Practical and Valid Guidelines for Realistic Estimation of Measurement Uncertainty in Pesticide Multi-Residue Analysis* Antonio Valverde Pesticide Residue Research Group University of Almería * This presentation
More informationTAYLOR SERIES METHOD (TSM) FOR UNCERTAINTY PROPAGATION 1
APPEDIX B TAYLOR SERIES METHOD (TSM) FOR UCERTAITY PROPAGATIO 1 In nearly all experiments, the measured values of different variables are combined using a data reduction equation (DRE) to form some desired
More informationConsultative Committee for Units (CCU)
Bureau International des Poids et Mesures Consultative Committee for Units (CCU) Report of the 16th meeting (13 14 May 2004) to the International Committee for Weights and Measures Comité international
More informationEA 4/02. Expression of the Uncertainty of Measurement in Calibration. Publication Reference
EAEA Publication Reference EA 4/0 Expression of the Uncertainty of Measurement in Calibration PURPOSE The purpose of this document is to harmonise evaluation of uncertainty of measurement within EA, to
More informationISO INTERNATIONAL STANDARD. Metallic materials Knoop hardness test Part 1: Test method
INTERNATIONAL STANDARD ISO 4545-1 First edition 2005-11-15 Metallic materials Knoop hardness test Part 1: Test method Matériaux métalliques Essai de dureté Knoop Partie 1: Méthode d'essai Reference number
More informationEA-10/17. EA Guidelines on the Calibration of Electromechanical Manometers. Publication Reference
EA-10/17 EA Guidance on the Calibration of Electromechanical Manometers Publication Reference EA-10/17 EA Guidelines on the Calibration of Electromechanical Manometers PURPOSE This document has been developed
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 7500-1 Third edition 2004-08-15 Metallic materials Verification of static uniaxial testing machines Part 1: Tension/compression testing machines Verification and calibration
More informationISO INTERNATIONAL STANDARD IULTCS/IUC 19-3
INTERNATIONAL STANDARD ISO 17226-3 IULTCS/IUC 19-3 First edition 2011-05-15 Leather Chemical determination of formaldehyde content Part 3: Determination of formaldehyde emissions from leather Cuir Dosage
More informationEvaluation. of the Uncertainty. of Measurement. In Calibration
Publication Reference EA-4/0 M: 013 Evaluation of the Uncertainty of Measurement In Calibration PURPOE The purpose of this document is to harmonise evaluation of uncertainty of measurement within EA, to
More informationReport to the IUPAP Council and Commission Chairs meeting. November 5-6, 2010
Report to the IUPAP Council and Commission Chairs meeting. IUPAP-C2 Commission on Symbols, Units, Nomenclature, Fundamental Constants and Atomic Masses November 5-6, 2010 Recommendation of IUPAP to the
More informationISO INTERNATIONAL STANDARD. Representation of results of particle size analysis Part 1: Graphical representation
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 9276-1 Second edition 1998-06-15 Representation of results of particle size analysis Part 1: Graphical representation Représentation de données
More informationSVENSK STANDARD SS-ISO :2005. Statistisk tolkning av data Del 6: Bestämning av statistiska toleransgränser (ISO :2005, IDT)
SVENSK STANDARD Fastställd 2005-05-04 Utgåva 1 Statistisk tolkning av data Del 6: Bestämning av statistiska toleransgränser (ISO 16269-6:2005, IDT) Statistical interpretation of data Part 6: Determination
More informationAngelique Botha. Philosophiæ doctor
The quantitative characterisation of geological reference materials by isotope dilution inductively coupled plasma mass spectrometry (ICP-MS) by Angelique Botha Submitted in partial fulfilment of the requirements
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 80000-8 First edition 2007-06-01 Corrected version 2007-08-15 Quantities and units Part 8: Acoustics Grandeurs et unités Partie 8: Acoustique Reference number ISO 80000-8:2007(E)
More informationA combinatorial technique for weighbridge verification
VERIFICATION/WEIGHING A combinatorial technique for weighbridge verification MARK T. CLARKSON Measurement Standards Laboratory of New Zealand Industrial Research Ltd. P O Box 31-310, Lower Hutt, New Zealand
More informationINTERNATIONAL STANDARD. This is a preview of "ISO :2009". Click here to purchase the full version from the ANSI store.
INTERNATIONAL STANDARD ISO 80000-1 First edition 2009-11-15 Quantities and units Part 1: General Grandeurs et unités Partie 1: Généralités Reference number ISO 80000-1:2009(E) ISO 2009 PDF disclaimer This
More informationISO INTERNATIONAL STANDARD. Indoor air Part 2: Sampling strategy for formaldehyde
INTERNATIONAL STANDARD ISO 16000-2 First edition 2004-07-01 Indoor air Part 2: Sampling strategy for formaldehyde Air intérieur Partie 2: Stratégie d'échantillonnage du formaldéhyde Reference number ISO
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 80000-9 First edition 2009-04-01 Quantities and units Part 9: Physical chemistry and molecular physics Grandeurs et unités Partie 9: Chimie physique et physique moléculaire Reference
More informationMeeting future needs for Metrological Traceability A physicist s view
Meeting future needs for Metrological Traceability Dr L R Pendrill IUPAP C2 SUNAMCO Secretary Presentation at Emerging Issues in Metrological Traceability IAEA HQ, Vienna, 17 February 2004 SP, Measurement
More informationEXPRESSION DE L INCERTITUDE DE MESURE EN ETALONNAGE
BELAC -107 Rev 1-014 EPRESSION DE L INCERTITUDE DE MESURE EN ETALONNAGE Mise en application: 01.07.014 BELAC -107 Rev 1-014 - 1/ 4 BELAC -107 Rev 1-014 - / 4 HISTORIQUE DU DOCUMENT EA-4/0 Révision et date
More informationINTERNATIONAL OIML R 54 RECOMMENDATION
INTERNATIONAL OIML R 54 RECOMMENDATION Edition 1981 (E) ph SCALE for AQUEOUS SOLUTIONS Echelle de ph des solutions aqueuses OIML R 54 Edition 1981 (E) ORGANISATION INTERNATIONALE DE METROLOGIE LEGALE INTERNATIONAL
More informationEstimation of measurement uncertainty arising from sampling
Estimation of measurement uncertainty arising from sampling 6th Committee Draft of the Eurachem/EUROLAB/CITAC/Nordtest Guide April 006 UfS_6_1 Apr06.doc Foreword Uncertainty of measurement is the most
More informationThe Monte Carlo method what and how?
A top down approach in measurement uncertainty estimation the Monte Carlo simulation By Yeoh Guan Huah GLP Consulting, Singapore (http://consultglp.com) Introduction The Joint Committee for Guides in Metrology
More informationISO INTERNATIONAL STANDARD. Reference radiation fields Simulated workplace neutron fields Part 1: Characteristics and methods of production
INTERNATIONAL STANDARD ISO 12789-1 First edition 2008-03-01 Reference radiation fields Simulated workplace neutron fields Part 1: Characteristics and methods of production Champs de rayonnement de référence
More informationRECOMMENDED TOOLS FOR SENSITIVITY ANALYSIS ASSOCIATED TO THE EVALUATION OF MEASUREMENT UNCERTAINTY
Advanced Mathematical and Computational Tools in Metrology and Testing IX Edited by F. Pavese, M. Bär, J.-R. Filtz, A. B. Forbes, L. Pendrill and K. Shirono c 2012 World Scientific Publishing Company (pp.
More informationComparability and Traceability Point of view from a metrological institute
Comparability and Traceability Point of view from a metrological institute Ed W.B. de Leer NMi Van Swinden Laboratory Delft, The Netherlands 1 My Discussions in Metrologyland 2 The CCQM in 1996 3 Traceability
More information