Determination of fiber/matrix interface debond growth parameters from cyclic loading of single fiber composites
|
|
- Lynn Matthews
- 5 years ago
- Views:
Transcription
1 Deterination o iber/atrix interace debond growth paraeters ro cyclic loading o single iber coposites Andrejs Pupurs 1,, Janis Varna 1, Povl Brøndsted 3, Stergios Goutianos 3 1 Luleå University o Technology, S Luleå, Sweden Swerea SICOMP, SE-9416 Piteå, Sweden 3 Technical University o Denark, Risø Capus, DK-4000 Roskilde, Denark 6 th International Conerence on Coposites Testing and Model Identiication (CopTest 013) -4 April 013, Aalborg, Denark.
2 c Fatigue daage in UD coposites c FL FL Failure o coposite siilar to static ailure. Rando iber breaks and ailure in ew load cycles. N=1 Rando iber breaks during irst cycle, N=1. Further daage developent in or o growing iber/atrix interace debond cracks. Ater certain aount o load cycles, aligned atrix cracks appear and propagate as debond cracks. Bridged cracks ollowed by new iber cracks Applied strain level is too low (below atigue liit). N=
3 3 Objective To ocus on iber/atrix interace debond growth in tensiontension atigue To use racture echanics (energy release rate) or the debond growth analysis To calculate the energy release rate and to deterine its dependence on debond length and to describe it by siple itting unction Using experiental data and the calculated energy release rate to evaluate whether a power law can describe the debond length growth rate in cyclic loading To deterine aterial constants in this power law, i it is applicable
4 Debond growth in tensiontension atigue l d (N) 4 ax Paris law: da dn B K l d in ax 0 in 0 da increase o the crack surace area dn increase o nuber o applied load cycles K stress intensity actor range B, aterial constants da dn B G II dldn dn B * G II where l dn l d /r B * B r G II G( ax ) G( in )
5 5 Deterination o power law paraeters dl dn dn B * Proper values o Paris law paraeters and B can only be ound i experiental data o l d =(N) are available. Experiental easureents o debond growth in atigue is coplicated or UD coposites. Single iber (SF) coposite with transparent atrix, is a convenient tool to easure debond crack growth in cyclic loading. Analytical and FEM calculations o G II or SF coposites are necessary to account or the stress state. G II
6 6 Concentric cylinder odel T F M L L l d iber break debonded iber region
7 7 Long and short debonds F M Stress state regions d) Plateau stress-state in bonded iber region. Long debonds Debond growth in selsiilar anner Analytical odel or G II calculation l d c) Debond tip region with stress singularity. b) Plateau stress-state in debonded iber region. a) Very coplex stress state at the iber break. Short debonds Strong interaction between stress states in regions a) and c) Nuerical ethods or G II calculation
8 8 Analytical solution. Energy release rate or long debonds J.A. Nairn, Y.C. Liu, On the use o energy ethods or interpretation o results o single-iber ragentation experients, Coposite Interaces, vol.4, pp , T k k r E G th ech II 1 d Q d E k r r r th d Q d E k 1 r r E E d d E d r 1 1 d E Q r E = 3 [GPa] E = 3.5 [GPa] E = 4 [GPa] = k k th
9 9 Nuerical calculation o energy release rate or short debonds u L syetry axis outer boundary T Energy release rate calculation using Virtual Crack Closure Technique (VCCT) Calculations perored using FEM sotware ANSYS G II (l d ) li dl d 0 1 dl d l d dl d l d u l d dl d l d r d r iber break Syetry b.c.
10 10 Magniication o energy release rate or short debonds.5 CF, k 1.8 FEM.0 CF, k th BEM k j * GF, k k * GF, k th l dn l dn BEM results taken ro: E. Graciani, V. Mantič, F. París, J. Varna, Nuerical analysis o debond propagation in the Single Fibre Fragentation Test, Coposites Science and Technology, vol.69, pp , 009.
11 11 General expression or energy release rate Long debonds: G k k T II E 4 r ech th Short debonds: k k * (l dn )k k th k th * (l dn )k th Fitting the whole range: k 0 k * * ( ldn) kth( ldn) k0 a1 1 a a3l ldn 1; dn ; ( l dn ) 1 l Energy release rate change in one load cycle: l dn dn G II (l dn ) r E k 0 (l dn ) 4 ( ech ax ) ( in ech ) ( )T( ax ech in ech )
12 Experiental easureents 1 1 st iber break Glass iber/epoxy E r [GPa] [-] [1/ C] E [GPa] [-] [1/ C] Fiber was pre-stressed with 7g o weight suspended at each end o iber First a static load was applied until irst break was initiated in iber ( 1st ) Tension-tension cyclic loading with requency =H, R=0.1 was applied under load control. Measureents o debond length l d were perored ater selected nuber o load cycles. Two dierent values o axial atigue strain level were studied: Saples A, B: ax = 1.76%; Saple C: ax = 1.3%. The strain levels approxiately correspond to 80% and 60% o the stress 1st respectively.
13 Experiental results. Debond growth in cyclic loading 13 N=1 N=1000 N= l d () 40 ld1 Saple A ld SapleA ld3 Saple A ld4 Saple A ld1 Saple B ld Saple B ld3 Saple B ld4 Saple B N= N
14 dldn dn B * G Deterination o the power law paraeters II r E k0 ( ldn) ax in ax in GII ( ldn) ( ech ) ( ech ) ( ) T ( ech ech ) 4 r 0 ( ) 0 E k ldn ax in ax in GII g ( ech) ( ech) ( ) T ( ech ech) 4 14 ln( l dn /N ) Saple A Saple B y = 8.799x y =.938x dl ln dn dn dldn dn ln B Saple B * * G 0 II g ln G 0 II ln g ln B * A B lng II 0
15 Validation o power law paraeters Saple A experiental Saple A odeling 8 Saple B experiantal Saple B odeling Saple C experiental 6 Saple C odeling l dn N
16 Conclusions 16 The strain energy release rate in Mode II or debond growth was analyed cobining analytical solution or long debonds and FEM solution or short debonds. Using the quantiied debond length versus nuber o cycles data it was shown that the power law with respect to the strain energy release rate change is applicable or debond growth characteriation in tension-tension atigue. Siulations showed that the obtained paraeters give acceptable predictions or cases, when the debond grows as well as when it does not grow. Being aterial properties the power law paraeters deterined in this study using single iber coposites can also be applied or the case o UD coposites ade o the sae aterial syste
17 17 Related papers A. Pupurs, S. Goutianos, P. Brøndsted, J. Varna, Interace debond crack growth in tension-tension cyclic loading o single iber polyer coposites, Coposites Part A, vol.44, pp , 013. A. Pupurs, J. Varna, FEM odeling o iber/atrix debond growth in tension-tension cyclic loading o unidirectional coposites, International Journal o Daage Mechanics, In Press, 013. (available online)
18 Thank you or your attention!
Micro-Crack Initiation and Propagation in Fiber Reinforced Composites. Andrejs Pupurs
DOCTORA L T H E S I S Micro-Crac Initiation and Propagation in Fiber Reinorced Coposites Andrejs Pupurs Micro-crac Initiation and Propagation in Fiber Reinorced Coposites DOCTORAL THESIS by Andrejs Pupurs
More informationEffect of fiber volume fraction on fracture mechanics in continuously reinforced fiber composite materials
University o South Florida Scholar Coons Graduate Theses and Dissertations Graduate School 2005 ect o iber volue raction on racture echanics in continuously reinorced iber coposite aterials Thoas Wasik
More informationLong-term Life Prediction of CFRP Structures Based on MMF/ATM Method
The 5 th Coposites Durability Workshop (CDW-5, October 7 to 20, 200, Kanazawa Institute o Technology Long-ter Lie Prediction o CFRP Structures Based on MMF/ATM Method by Yasushi Miyano and Masayuki Nakada
More informationBuckling Behavior of 3D Randomly Oriented CNT Reinforced Nanocomposite Plate
Buckling Behavior o 3D Randoly Oriented CNT Reinorced Nanocoposite Plate A. K. Srivastava 1*, D. Kuar 1* Research scholar, Mechanical Departent, MNIT Jaipur, INDIA, e-ail: ashish.eech@gail.co Asst. Pro.,
More informationFatigue Life Prediction in Composite Materials
Autodesk Helius PFA 2017 Fatigue Lie Prediction in Coposite Materials Predicting atigue lie in coposites is challenging because even siple load states lead to coplex behavior in the individual iber and
More informationModelling of damage in composite materials using interface elements
5 th European LS-DYNA Users Conference Coposites Modelling of daage in coposite aterials using interface eleents Authors: W.G. Jiang, Departent of Aerospace Engineering, University of Bristol S.R. Hallett,
More informationXiaoming Mao. Department of Physics and Astronomy, University of Pennsylvania. Collaborators: Tom Lubensky, Ning Xu, Anton Souslov, Andrea Liu
Xiaoing Mao Departent of Physics and Astronoy, University of Pennsylvania Collaborators: To Lubensky, Ning Xu, Anton Souslov, Andrea Liu Feb., 009 What is isostaticity? Isostatic systes are at the onset
More informationJournal of Solid Mechanics and Materials Engineering
Journal o Solid Mechanics and Materials Engineering First Order Perturbation-based Stochastic oogeniation Analysis or Short Fiber Reinorced Coposite Materials* Sei-ichiro SAKATA**, Fuihiro ASIDA** and
More informationFATIGUE DURABILITY OF CONCRETE EXTERNALLY STRENGTHENED WITH FRP SHEETS
FATIGUE DURABILITY OF CONCRETE EXTERNALLY STRENGTHENED WITH FRP SHEETS H. Diab () and Zhishen Wu () () Department o Urban and Civil Engineering, Ibaraki University, Japan Abstract A primary concern o the
More informationA method to determine relative stroke detection efficiencies from multiplicity distributions
A ethod to deterine relative stroke detection eiciencies ro ultiplicity distributions Schulz W. and Cuins K. 2. Austrian Lightning Detection and Inoration Syste (ALDIS), Kahlenberger Str.2A, 90 Vienna,
More informationBlock failure in connections - including effets of eccentric loads
Downloaded ro orbit.dtu.dk on: Apr 04, 209 Block ailure in connections - including eets o eccentric loads Jönsson, Jeppe Published in: Proceedings o the 7th European conerence on steel and coposite structures
More informationEVALUATION OF THERMAL CONDUCTIVITY IN PITCH- BASED CARBON FIBER REINFORCED PLASTICS
16 TH INTERNATIONA CONFERENCE ON COMPOSITE MATERIAS EVAUATION OF THERMA CONDUCTIVITY IN PITCH- BASED CARBON FIBER REINFORCED PASTICS Shinji Ogihara*, Makoto Yaaguchi**, Takahito Chiba**, Junichi Shiizu****,
More informationStrain Rate and Temperature Effects on the Nonlinear Behavior of Woven Composites
ICCM 17 UK 29 Strain Rate and Teperature Effects on the Nonlinear Behavior of Woven Coposites Liqun Xing, Ken Reifsnider Departent of Mechanical Engineering University of South Carolina, Colubia, SC xingliqun@gail.edu
More informationPredictions of Storage Modulus of Glass Bead-Filled Low-Density-Polyethylene Composites
Materials Sciences and Applications, 2010, 1, 343-349 doi:10.4236/sa.2010.16050 Published Online Deceber 2010 (http://www.scirp.org/journal/sa) 343 Predictions o Storage Modulus o Glass Bead-Filled Low-Density-Polyethylene
More informationNonmonotonic Networks. a. IRST, I Povo (Trento) Italy, b. Univ. of Trento, Physics Dept., I Povo (Trento) Italy
Storage Capacity and Dynaics of Nononotonic Networks Bruno Crespi a and Ignazio Lazzizzera b a. IRST, I-38050 Povo (Trento) Italy, b. Univ. of Trento, Physics Dept., I-38050 Povo (Trento) Italy INFN Gruppo
More informationCHAPTER 5 THEORETICAL MODELING OF ELASTIC PROPERTIES
123 CHAPTR 5 THORTICAL MODLING OF LASTIC PROPRTIS 5.1 INTRODUCTION lastic properties are the basic quantities that are required durin desin and optiization of a lainated structure. An orthotropic laina/lainate
More informationPOST-PERFORATION LENGTH AND VELOCITY OF KE PROJECTILES WITH SINGLE OBLIQUE TARGETS
15th International Syposiu on Ballistics Jerusale, Israel, 21-24 May, 1995 OS-ERFORAION LENGH AND VELOCIY OF KE ROJECILES WIH SINGLE OBLIQUE ARGES R. Jeanquartier, W. Oderatt Defence echnology and rocureent
More informationANALYTICAL INVESTIGATION AND PARAMETRIC STUDY OF LATERAL IMPACT BEHAVIOR OF PRESSURIZED PIPELINES AND INFLUENCE OF INTERNAL PRESSURE
DRAFT Proceedings of the ASME 014 International Mechanical Engineering Congress & Exposition IMECE014 Noveber 14-0, 014, Montreal, Quebec, Canada IMECE014-36371 ANALYTICAL INVESTIGATION AND PARAMETRIC
More informationDensity. Density 22/10/2015. Rules of Mixture for Elastic Properties. Materi ke-6
//5 Materi ke-6 Rules o Mixture or lastic Properties Nurun nayiroh, M.Si Rules o Mixture' adalah ekspresi ateatika yang eberikan beberapa properti dari koposit dala hal siat, kuantitas dan penataan bahan
More informationCritical Analysis of FRP-NSM double-shear pull-out tests. Abstract
Critical Analysis o FRP-NSM double-shear pull-out tests Inês COSTA * PhD student ISISE - University o Minho Departent o Civil Engineering, Capus de Azuré, 4800-058 Guiarães, Portugal ines.costa@civil.uinho.pt*
More informationDIRECT NUMERICAL SIMULATION OF DAMAGE PROGRESSION IN LAMINATED COMPOSITE PLATES USING MULTI-SCALE MODELLING
DIRECT NUMERICAL SIMULATION OF DAMAGE PROGRESSION IN LAMINATED COMPOSITE PLATES USING MULTI-SCALE MODELLING DIRECT NUMERICAL SIMULATION OF DAMAGE PROGRESSION IN LAMINATED COMPOSITE PLATES USING MULTI-SCALE
More informationDynamic buckling of laminated composite stringer stiffened CFRP panels under axial compression
MATEC Web o Conerences 149, 01044 (018) https://doi.org/10.1051/ateccon/01814901044 Dynaic buckling o lainated coposite stringer stiened CFRP panels under axial copression Mouhat Ouadia 1, Khalichi Abdellati,
More informationDamage Detection using Stochastic Subspace Identification
Daage Detection using Stochastic Subspace Identiication S. H. Si 1 and B. F. Spencer, Jr. 2 1 Departent o Civil and Environental Engineering, University o Illinois at Urbana-Chapaign, Urbana, IL 6181,
More informationMicromechanical models for stiffness prediction of alumina trihydrate (ATH)
Microechanical odels or stiness prediction o aluina trihydrate (ATH) reinorced poly (ethyl ethacrylate) (PMMA): eect o iller volue raction and teperature. O. A. Stapountzi, M. N. Charalabides, J. G. Willias
More informationRevealing spatially heterogeneous relaxation in a model. nanocomposite
Revealing spatially heterogeneous relaxation in a odel nanocoposite Shiwang Cheng, 1 Stephen Mirigian, 2 Jan-Michael Y. Carrillo, 3,4 Vera Bocharova, 1 Bobby G. Supter, 3,4 Kenneth S. Schweizer, 2 Alexei
More informationESTIMATION OF THE VISCOELASTIC PARAMETERS OF LAMINATED COMPOSITES. PART I. ANALYTICAL CONSIDERATIONS
nd International Conerence danced Coposite aterials Engineering COT 8 9 October 8, Braso, Roania ESTITION OF THE VISCOELSTIC RETERS OF LINTED COOSITES. RT I. NLYTICL CONSIDERTIONS.Katouzian, S. Vlase,.V.Guian
More informationA NEW APPROACH TO DYNAMIC BUCKLING LOAD ESTIMATION FOR PLATE STRUCTURES
Stability o Structures XIII-th Syposiu Zakopane 202 A NW APPROACH TO DYNAMIC BUCKLIN LOAD STIMATION FOR PLAT STRUCTURS T. KUBIAK, K. KOWAL-MICHALSKA Departent o Strength o Materials, Lodz University o
More informationEstimating flow properties of porous media with a model for dynamic diffusion
Estiating low properties o porous edia with a odel or dynaic diusion Chuntang Xu*, Jerry M. Harris, and Youli Quan, Geophysics Departent, Stanord University Suary We present an approach or estiating eective
More informationMaterials and Design
Materials and Design 34 (211) 32 312 Contents lists available at SciVerse ScienceDirect Materials and Design journal hoepage: www.elsevier.co/locate/atdes Technical Report An experiental study on the ratcheting
More informationBenchmarking of lamina failure tests from WWFE-I and WWFE-II with a three parameter micromechanics based matrix failure theory
International Conference on Future Technologies for Wind Energy October 07-09, 03, Laraie, Wyoing, USA Bencharking of laina failure tests fro WWFE-I and WWFE-II with a three paraeter icroechanics based
More informationFiber / Toughened Epoxy Composites under
Fatigue Behavior o Impact-Damaged Carbon Fiber / Toughened Epoxy Composites under Compressive loading Toshio Ogasawara, Hisaya Katoh, unao ugimoto, and Takashi Ishikawa Advanced d Composite Technology
More informationSupplement of Detailed characterizations of the new Mines Douai comparative reactivity method instrument via laboratory experiments and modeling
uppleent o Atos Meas Tech, 8, 57 55, 05 http://wwwatos-eas-technet/8/57/05/ doi:0594/at-8-57-05-suppleent Authors 05 CC Attribution 0 License uppleent o Detailed characterizations o the new Mines Douai
More information2nd Workshop on Joints Modelling Dartington April 2009 Identification of Nonlinear Bolted Lap Joint Parameters using Force State Mapping
Identification of Nonlinear Bolted Lap Joint Paraeters using Force State Mapping International Journal of Solids and Structures, 44 (007) 8087 808 Hassan Jalali, Haed Ahadian and John E Mottershead _ Γ
More information3-D FEM Modeling of fiber/matrix interface debonding in UD composites including surface effects
IOP Conference Series: Materials Science an Engineering 3-D FEM Moeling of fiber/matrix interface eboning in UD composites incluing surface effects To cite this article: A Pupurs an J Varna 2012 IOP Conf.
More informationDebond crack growth in fatigue along fiber in UD composite with broken fibers
Debon crack growth in atigue along iber in UD composite with broken ibers Johannes Eitzenberger an Janis arna Dept o Applie Physics an Mechanical Engineering Lulea University o Technology, Sween SE 97
More informationDual porosity DRM formulation for flow and transport through fractured porous media
Boundary Eleents XXVII 407 Dual porosity DRM orulation or lo and transport through ractured porous edia T. aardzioska & V. Popov Wessex Institute o Technology, UK Abstract The ain objective o this ork
More informationRandom Vibration Fatigue Analysis with LS-DYNA
1 th International LS-DYNA Users Conference Siulation() Rando Vibration Fatigue Analysis with LS-DYNA Arnaud Ringeval 1, Yun Huang 1 CIMES, France 36 rue Marc Lefrancq, Les Ateliers Nuériques, 593 Valenciennes,
More informationTHERMAL ENDURANCE OF UNREINFORCED UNSATURATED POLYESTERS AND VINYL ESTER RESINS = (1) ln = COMPOSITES & POLYCON 2009
Aerican Coposites Manufacturers Association January 15-17, 29 Tapa, FL USA Abstract THERMAL ENDURANCE OF UNREINFORCED UNSATURATED POLYESTERS AND VINYL ESTER RESINS by Thore M. Klaveness, Reichhold AS In
More informationOptimization of Flywheel Weight using Genetic Algorithm
IN: 78 7798 International Journal o cience, Engineering and Technology esearch (IJET) Volue, Issue, March 0 Optiization o Flywheel Weight using Genetic Algorith A. G. Appala Naidu*, B. T.N. Charyulu, C..C.V.aanaurthy
More informationSupplementary Information for Design of Bending Multi-Layer Electroactive Polymer Actuators
Suppleentary Inforation for Design of Bending Multi-Layer Electroactive Polyer Actuators Bavani Balakrisnan, Alek Nacev, and Elisabeth Sela University of Maryland, College Park, Maryland 074 1 Analytical
More informationSupplementary Materials for
advances.scienceag.org/cgi/content/full/3/4/e160890/dc1 Suppleentary Materials for Direct 4D printing via active coposite aterials Zhen Ding, Chao Yuan, Xirui Peng, Tiejun Wang, H. Jerry Qi, Martin L.
More informationFatigue Prediction for Composite Materials and Structures
UNCLAIFIED/UNLIMITED Fatigue rediction or Coposite Materials and tructures Oar ALOMON*, Fernando RATELLINI, ergio OLLER and Eugenio OÑATE CIMNE (International Center or Nuerical Methods in Engineering)
More informationEFFECT OF SHEAR STRESS ON FATIGUE LIFE OF COMPOSITE LAMINATES
18 TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS Abstract EFFECT OF SHEAR STRESS ON FATIGUE LIFE OF COMPOSITE LAMINATES G. Mustafa 1 *, S.K. Ha 2, Y. Haung 2, K. Jin 2 1 Design Departent, AE Design,
More informationAn Inverse Interpolation Method Utilizing In-Flight Strain Measurements for Determining Loads and Structural Response of Aerospace Vehicles
An Inverse Interpolation Method Utilizing In-Flight Strain Measureents for Deterining Loads and Structural Response of Aerospace Vehicles S. Shkarayev and R. Krashantisa University of Arizona, Tucson,
More informationMICROMECHANICAL FAILURE ANALYSIS OF UNIDIRECTIONAL FIBER-REINFORCED COMPOSITES UNDER IN-PLANE AND TRANSVERSE SHEAR
THE 19 TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS MICROMECHANICAL FAILURE ANALYSIS OF UNIDIRECTIONAL FIBER-REINFORCED COMPOSITES UNDER IN-PLANE AND TRANSVERSE SHEAR Lei Yang*, Ying Yan, Zhiguo
More informationFracture Mechanics of soft Materials: crack tip field of a material that exhibits finite extensibility
Fracture Mechanics of soft Materials: crack tip field of a aterial that exhibits finite extensibility Chung-Yuen Hui Mechanical and Aerospace Engineering, Cornell University Acknowledgeent: Forer Ph.D
More informationCharacterization of Internal State Variable for fiber fracture in UD Composite
Characterization o Internal State ariable or iber racture in UD Composite Modris Megnis,, Povl Brondsted 3, Sai A. Rehman 4, Tanveer Ahmad 5 Summary The continuum damage mechanics is used to describe the
More informationExtension of CSRSM for the Parametric Study of the Face Stability of Pressurized Tunnels
Extension of CSRSM for the Paraetric Study of the Face Stability of Pressurized Tunnels Guilhe Mollon 1, Daniel Dias 2, and Abdul-Haid Soubra 3, M.ASCE 1 LGCIE, INSA Lyon, Université de Lyon, Doaine scientifique
More informationSpine Fin Efficiency A Three Sided Pyramidal Fin of Equilateral Triangular Cross-Sectional Area
Proceedings of the 006 WSEAS/IASME International Conference on Heat and Mass Transfer, Miai, Florida, USA, January 18-0, 006 (pp13-18) Spine Fin Efficiency A Three Sided Pyraidal Fin of Equilateral Triangular
More informationNumerical predictions of the anisotropic. viscoelastic response of uni-directional fibre composites
Nuerical predictions o the anisotropic viscoelastic response o uni-directional ibre coposites M.V. Pathan a, V.L. Tagarielli a,, S.Patsias b a Departent o Aeronautics, Iperial College London, South Kensington
More informationEngineering Solid Mechanics
}} Engineering Solid Mechanics 1 (013) 69-76 Contents lists available at GrowingScience Engineering Solid Mechanics hoepage: www.growingscience.co/es Designing and anufacturing of a drop weight ipact test
More informationUniaxial compressive stress strain model for clay brick masonry
Uniaxial copressive stress strain odel for clay brick asonry Heant B. Kaushik, Durgesh C. Rai* and Sudhir K. Jain Departent of Civil Engineering, Indian Institute of Technology Kanpur, Kanpur 208 016,
More informationResearch and Experiments on Electromagnetic Field Induced by Two. Coaxial Solenoid Coils of Axially Mag-lev Driving Needle
3rd International Conference on Mechatronics and Inforation Technology (ICMIT 16) Research and Experients on Electroagnetic Field Induced by Two Coaxial Solenoid Coils of Axially Mag-lev Driving Needle
More informationIDENTIFICATION OF STABILITY OF CONCRETE TUNNEL LINING USING COUPLED MODELING
IDENTIFICATION OF STABILITY OF CONCRETE TUNNEL LINING USING COUPLED MODELING Kaila Weiglová, Technical University in Brno, Institute of Geoechanics, Brno, Czech Republic Petr Procházka*, Czech Association
More informationCHARACTERIZATION, ANALYSIS AND PREDICTION OF DELAMINATION IN COMPOSITES USING FRACTURE MECHANICS
Oral Reference Number: ICF100942OR CHARACTERIZATION, ANALYSIS AND PREDICTION OF DELAMINATION IN COMPOSITES USING FRACTURE MECHANICS T. Kevin O Brien U.S. Army Research Laboratory Vehicle Technology Directorate
More informationExcitability of guided waves in composites with PWAS transducers
Excitability of guided waves in coposites with PWAS transducers Yanfeng Shen and Victor Giurgiutiu Citation: AIP Conference Proceedings 65, 658 (25); doi:.63/.494666 View online: http://dx.doi.org/.63/.494666
More informationSuccessive Model-Updating of the dynamic behaviour of casing bodies on a practical example of an axial piston pump
Successive Model-Updating of the dynaic behaviour of casing bodies on a practical exaple of an axial piston pup Ulrich Bittner Bosch Rexroth, Horb, Gerany Suary: These days, generally all new products
More informationInterfacial Stress Transfer in a Graphene Monolayer Nanocomposite
Interacial Stress Transer in a Graphene Monolayer Nanocoposite L. Gong 1, I. A. Kinloch 1, R. J. Young 1, *, I. Riaz 2, R. Jalil 2 & K. S. Novoselov 2, 1 School o Materials, University o Manchester, Grosvenor
More informationREDUCTION OF FINITE ELEMENT MODELS BY PARAMETER IDENTIFICATION
ISSN 139 14X INFORMATION TECHNOLOGY AND CONTROL, 008, Vol.37, No.3 REDUCTION OF FINITE ELEMENT MODELS BY PARAMETER IDENTIFICATION Riantas Barauskas, Vidantas Riavičius Departent of Syste Analysis, Kaunas
More information2. A crack which is oblique (Swedish sned ) with respect to the xy coordinate system is to be analysed. TMHL
(Del I, teori; 1 p.) 1. In fracture echanics, the concept of energy release rate is iportant. Fro the fundaental energy balance of a case with possible crack growth, one usually derives the equation where
More informationPhysical Chemistry I for Biochemists Chem340. Lecture 26 (3/14/11)
Physical Cheistry I or Biocheists Che340 Lecture 26 (3/14/11) Yoshitaka Ishii Ch 7.2, 7.4-5, & 7.10 Announceent Exa 2 this Friday. Please be well prepared! HW average 80-85. You will probably have one
More informationA model study of the effective Young s modulus for randomly distributed short-fiber composites
FFI-rapport 0/00 A odel study o the eective Young s odulus or randoly distriuted short-ier coposites To Thorvaldsen Norwegian Deence Research stalishent (FFI 5 January 0 FFI-rapport 0/00 0540 P: ISBN 978-8-464-87-8
More informationCONTRIBUTIONS TO ULTRASONIC WELDING OF INTELLIGENT COMPOSITE MATERIALS USED IN VEHICLE MANUFACTURING
The 4th International Conference Advanced Coposite Materials Engineering COMAT 01 18-0 October 01, Brasov, Roania CONTRIBUTIONS TO ULTRASONIC WELDING OF INTELLIGENT COMPOSITE MATERIALS USED IN VEHICLE
More informationA Simplified Analytical Approach for Efficiency Evaluation of the Weaving Machines with Automatic Filling Repair
Proceedings of the 6th SEAS International Conference on Siulation, Modelling and Optiization, Lisbon, Portugal, Septeber -4, 006 0 A Siplified Analytical Approach for Efficiency Evaluation of the eaving
More informationChapter 8 Deflection. Structural Mechanics 2 Dept of Architecture
Chapter 8 Deflection Structural echanics Dept of rchitecture Outline Deflection diagras and the elastic curve Elastic-bea theory The double integration ethod oent-area theores Conjugate-bea ethod 8- Deflection
More informationChapter 8. Lecture Notes Dr. Rakhmad Arief Siregar Kolej Universiti Kejuruteraan Utara Malaysia
Chapter 8 Screw, Fasteners and the Design of Nonperanent Joint Lecture Notes Dr. Rakhad Arief Siregar Kolej Universiti Kejuruteraan Utara Malaysia Mechanical Engineering Design Sixth Metric Edition J.E.
More informationNonlinear Viscoelastic Viscoplastic Material Model Including Stiffness Degradation for Hemp/Lignin Composites
Nonlinear Viscoelastic Viscoastic Material Model Including Stiffness Degradation for Hep/Lignin Coposites Erik Marklund, Johannes Eitzenberger, Janis Varna To cite this version: Erik Marklund, Johannes
More informationDECONVOLUTION VERSUS CONVOLUTION A COMPARISON FOR MATERIALS WITH CONCENTRATION GRADIENT
Materials Structure, vol. 7, nuber () 43 DECONVOLUTION VERSUS CONVOLUTION A COMPARISON FOR MATERIALS WITH CONCENTRATION GRADIENT David Raaa Departent o Electronic Structures, Faculty o Matheatics and Physics,
More informationBond strength model for interfaces between nearsurface mounted (NSM) CFRP strips and concrete
University o Wollongong Research Online Faculty o Engineering and Inormation Sciences - Papers: Part A Faculty o Engineering and Inormation Sciences 2014 Bond strength model or interaces between nearsurace
More informationPage 1. Physics 131: Lecture 22. Today s Agenda. SHM and Circles. Position
Physics 3: ecture Today s genda Siple haronic otion Deinition Period and requency Position, velocity, and acceleration Period o a ass on a spring Vertical spring Energy and siple haronic otion Energy o
More informationACTIVE VIBRATION CONTROL FOR STRUCTURE HAVING NON- LINEAR BEHAVIOR UNDER EARTHQUAKE EXCITATION
International onference on Earthquae Engineering and Disaster itigation, Jaarta, April 14-15, 8 ATIVE VIBRATION ONTROL FOR TRUTURE HAVING NON- LINEAR BEHAVIOR UNDER EARTHQUAE EXITATION Herlien D. etio
More informationAssessment of wind-induced structural fatigue based on joint probability density function of wind speed and direction
The 1 World Congress on Advances in Civil, Environental, and Materials Research (ACEM 1) eoul, Korea, August 6-3, 1 Assessent of wind-induced structural fatigue based on oint probability density function
More informationTopic 5a Introduction to Curve Fitting & Linear Regression
/7/08 Course Instructor Dr. Rayond C. Rup Oice: A 337 Phone: (95) 747 6958 E ail: rcrup@utep.edu opic 5a Introduction to Curve Fitting & Linear Regression EE 4386/530 Coputational ethods in EE Outline
More informationMathematical Models to Determine Stable Behavior of Complex Systems
Journal of Physics: Conference Series PAPER OPEN ACCESS Matheatical Models to Deterine Stable Behavior of Coplex Systes To cite this article: V I Suin et al 08 J. Phys.: Conf. Ser. 05 0336 View the article
More informationApproach to Operational Experimental Estimation of Static Stresses of Elements of Mechanical Structures
Journal o Physics: Conerence Series PAPE OPE ACCESS Approach to Operational Eperiental Estiation o Static Stresses o Eleents o Mechanical Structures o cite this article: A V Sedov et al 8 J Phys: Con Ser
More informationNonlinear Analysis of Reinforced Masonry Shear Walls with ASCE 41
Nonlinear Analysis of Reinforced Masonry Shear Walls with ASCE 41 Noveber 4, 2017 P. Benson Shing University of California, San Diego The Masonry Society AIA Provider: 50119857 Reinforced Masonry Wall
More informationModeling and Analysis of Thermal Bimorph Using COMSOL
Modeling and Analysis of Theral Biorph Using COMSOL Rachita Shettar *, Dr B G Sheeparaatti 2 Basaveshwar Engineering college Bagalkot- 587102 *Corresponding author: D/o J.H Shettar, #156B Shivananda nagar,
More informationDepartment of Electronic and Optical Engineering, Ordnance Engineering College, Shijiazhuang, , China
6th International Conference on Machinery, Materials, Environent, Biotechnology and Coputer (MMEBC 06) Solving Multi-Sensor Multi-Target Assignent Proble Based on Copositive Cobat Efficiency and QPSO Algorith
More informationChapter 3 Micromechanical Analysis of a Lamina Ultimate Strengths of a Unidirectional Lamina
Chapter 3 Microechanical Analysis o a Laina Ultiate Strengths o a Unidirectional Laina Dr. Autar Kaw Departent o Mechanical Engineering University o South Florida, Tapa, FL 33620 Courtesy o the Textbook
More informationFeature Extraction Techniques
Feature Extraction Techniques Unsupervised Learning II Feature Extraction Unsupervised ethods can also be used to find features which can be useful for categorization. There are unsupervised ethods that
More informationLife Prediction Under Multiaxial Fatigue
Lie Prediction Under Multiaxial Fatigue D. Ramesh and M.M. Mayuram Department o Mechanical Engineering Indian Institute o Technology, Madras Chennai-600 036 (India) e-mail: mayuram@iitm.ac.in ABSTRACT
More informationI. Understand get a conceptual grasp of the problem
MASSACHUSETTS INSTITUTE OF TECHNOLOGY Departent o Physics Physics 81T Fall Ter 4 Class Proble 1: Solution Proble 1 A car is driving at a constant but unknown velocity,, on a straightaway A otorcycle is
More informationA Finite Element Propagation Model For Extracting Normal Incidence Impedance In Nonprogressive Acoustic Wave Fields
NASA Technical Meorandu 110160 A Finite Eleent Propagation Model For Extracting Noral Incidence Ipedance In Nonprogressive Acoustic Wave Fields Willie R. Watson Langley Research Center, Hapton, Virginia
More informationDelamination Prediction of Uni-Directional Composite Laminates using Shell Elements and a Strain Rate Dependent Micro-mechanical Material Model
14 th International LS-DYNA Users Conerence Session: Coposites Delaination Preiction o Uni-Directional Coposite Lainates using Shell Eleents an a Strain Rate Depenent Micro-echanical Material Moel Saneep
More informationTEST OF HOMOGENEITY OF PARALLEL SAMPLES FROM LOGNORMAL POPULATIONS WITH UNEQUAL VARIANCES
TEST OF HOMOGENEITY OF PARALLEL SAMPLES FROM LOGNORMAL POPULATIONS WITH UNEQUAL VARIANCES S. E. Ahed, R. J. Tokins and A. I. Volodin Departent of Matheatics and Statistics University of Regina Regina,
More informationNUMERICAL MODELLING OF THE TYRE/ROAD CONTACT
NUMERICAL MODELLING OF THE TYRE/ROAD CONTACT PACS REFERENCE: 43.5.LJ Krister Larsson Departent of Applied Acoustics Chalers University of Technology SE-412 96 Sweden Tel: +46 ()31 772 22 Fax: +46 ()31
More informationApplication of Differential Geometry in Magnetic Levitation Control
Appl. Math. In. Sci. 8, No. 5, 2437-2442 (2014) 2437 Applied Matheatics & Inoration Sciences An International Journal http:dx.doi.org10.12785ais080539 Application o Dierential Geoetry in Magnetic Levitation
More informationA DESIGN GUIDE OF DOUBLE-LAYER CELLULAR CLADDINGS FOR BLAST ALLEVIATION
International Journal of Aerospace and Lightweight Structures Vol. 3, No. 1 (2013) 109 133 c Research Publishing Services DOI: 10.3850/S201042862013000550 A DESIGN GUIDE OF DOUBLE-LAYER CELLULAR CLADDINGS
More informationSPECTRUM sensing is a core concept of cognitive radio
World Acadey of Science, Engineering and Technology International Journal of Electronics and Counication Engineering Vol:6, o:2, 202 Efficient Detection Using Sequential Probability Ratio Test in Mobile
More informationS. Srinivasan, Technip Offshore, Inc., Houston, TX
9 th ASCE Specialty Conerence on Probabilistic Mechanics and Structural Reliability PROBABILISTIC FAILURE PREDICTION OF FILAMENT-WOUND GLASS-FIBER Abstract REINFORCED COMPOSITE TUBES UNDER BIAXIAL LOADING
More informationCOS 424: Interacting with Data. Written Exercises
COS 424: Interacting with Data Hoework #4 Spring 2007 Regression Due: Wednesday, April 18 Written Exercises See the course website for iportant inforation about collaboration and late policies, as well
More informationDetermination of Relaxation and Retardation Spectrum from Modulus of Complex Frequency-Domain Material functions
Deterination of Relaxation and Retardation Spectru fro Modulus of Coplex Frequency-Doain Material functions VAIRIS SHTRAUSS, ALDIS KALPINSH Institute of Polyer Mechanics University of Latvia 3 Aizkraukles
More informationAnalysis and Implementation of a Hardware-in-the-Loop Simulation
DINAME 27 - Proceedings of the XVII International Syposiu on Dynaic Probles of Mechanics A. T. Fleury, D. A. Rade, P. R. G. Kurka (Editors), ABCM, São Sebastião, SP, Brail, March 5-, 27 Analysis and Ipleentation
More informationA 3D Discrete Damage Modeling Methodology for Abaqus for Fatigue Damage Evaluation in Bolted Composite Joints
A 3D Discrete Damage Modeling Methodology for Abaqus for Fatigue Damage Evaluation in Bolted Composite Joints Eugene Fang 1, Ling Liu 1, Michael Stuebner 1, Jim Lua 1 1 Global Engineering and Materials,
More informationMeasuring Temperature with a Silicon Diode
Measuring Teperature with a Silicon Diode Due to the high sensitivity, nearly linear response, and easy availability, we will use a 1N4148 diode for the teperature transducer in our easureents 10 Analysis
More informationDescription of the nonlinear viscoelastic and thixotropic properties of human blood by the modified model of Maxwell-Gurevich-Rabinovich
L. Hadjikov et al. / Series on Bioechanics, Vo.23, No., 27 Description of the nonlinear viscoelastic and thixotropic properties of huan blood by the odified odel of Maxwell-urevich-Rabinovich L. Hadjikov,
More informationEnvelope frequency Response Function Analysis of Mechanical Structures with Uncertain Modal Damping Characteristics
Copyright c 2007 Tech Science Press CMES, vol.22, no.2, pp.129-149, 2007 Envelope frequency Response Function Analysis of Mechanical Structures with Uncertain Modal Daping Characteristics D. Moens 1, M.
More informationTransfer from Arbitrary Pure State to Target Mixed State for Quantum Systems
reprints o the 8th FAC World Congress ilano (taly August 8 - epteber, ranser ro Arbitrary ure tate to arget ixed tate or Quantu ystes J. WEN,. CONG Departent o Autoation, University o cience and echnology
More informationDetermining a Function for the Damping Coefficient of a laminated Stack
DOI: 10.435/UB.OVGU-017-093 TECHNISCHE MECHANIK, 37, -5, (017), 161 170 subitted: June 9, 017 Deterining a Function for the Daping Coefficient of a lainated Stack C. Zahalka, K. Ellerann The design of
More informationNumerical Modeling of Self-Compacting Mortar Flow Using Discrete Element Method
Nuerical Modeling of Self-Copacting Flow Using Discrete Eleent Method - Technical Paper - Miansong HUANG *1, Xuehui AN *, Takayuki OBARA *3 and Masahiro OUCHI *4 ABSTRACT A nuerical odeling of Self-Copacting
More information