Spark Ignition Engine Combustion
|
|
- Shauna Pearson
- 5 years ago
- Views:
Transcription
1 Spark Ignition Engine Combustion MAK 652E Reduced Mechanisms and Autoignition Prof.Dr. Cem Soruşbay Istanbul Technical University - Automotive Laboratories Contents Problem statement Methods of reducing mechanisms Autoignition Physical and kinetic model Engine application 1
2 Background - Problem Statement with Detailed Chemistry The calculation of spatially homogeneous systems is straightforward using generally available hardware. Calculation of two-dimensional laminar flames requires several hundred hours of supercomputer time. The simulation of the three-dimensional turbulent flames is very time demanding.* * Turanyi, T., 25th Symposium on Combustion, The Combustion Institute, , Background - Problem Statement Conflict between chemical and physical complexity 3D flow calculation: ~10 6 computational cells Turbulent flow: ~10 1 differential equations Detailed Chemistry: ~10 2 extra differential equations Great span between high/low values, slow/fast processes: stiffness additional numerical problems 2
3 Background - Problem Statement Detailed Mechanism Reduced Mechanism Homogeneous model ~1000 reactions Practical fuel mixtures 3D flow model Multi-component fuel mixtures Combustion Calculations Mechanisms for ignition characteristics need to be compact for integration with complex fluid flow calculations Construct reduced chemical mechanisms for: Variable multi-component fuel mixtures, e.g. gasoline and diesel Varying conditions. We need a flexible method for repeated reduction 3
4 Goals - Requirements Goals: Automate the systematic reduction procedure to generate mechanisms for complex chemical processes given variation in: Fuel mixtures Physically Relevant Conditions Requirements: Extensive reduction capability A measure of the impact of a species on selected variables Reproduction of complex chemical processes Construction of mechanisms using simplified physics models Application SI Engine Knock It is generally accepted that engine knock is initiated by autoignition of unburned gas. Autoignition is defined as spontaneous ignition of some part of the charge in the cylinder.* * Maly and Ziegler, 1982, Li et al.,
5 Knock Abnormal Combustion It causes mechanical damage of engine The simplest way to avoid knock is lower compression ratio but it reduces thermal efficiency Algorithm for Reduced Mechanisms Removal of redundant reactions Quasi steady-state approximations (QSSA) Detailed mechanism (data) Skeletal mechanism (data) Reduced mechanism (code) Source terms Range of test calculations (simplified model) Reaction flow and sensitivity analysis (Soyhan et al., 2000) Range of test calculations (simplified model) Chemical and physical lifetime plus sensitivity analysis State variables and major concentrations CFD code (PDF, RIF) 5
6 4 4 Skeletal Mechanism The Detailed Mechanism Flow Chart - Reduction procedure Reaction Sensitivity Sensitive Redundant 4 4 Species 4 Flow 4 Species 4 4 Analysis Analysis End of Parameter Loop? Removal of Redundant Species Loop Over Parameter Range 4 Skeletal Mechanisms The Skeletal Mechanism 4 Validation of Skeletal Mechanisms Reduced Mechanism The Skeletal Mechanism Species Maximum 4 Lifetime 4 Species 4 4 Analysis Lifetimes End of parameter loop? Q.S.S.A Reduction Loop over parameter range Reduced Mechanisms Final Reduced Mechanism 4 Validation of Reduced Mechanisms 6
7 Reduction Methods Skeletal Mechanism Removal of redundant reaction paths A measure of redundance: Reaction flow - transfer rate of atomic species between molecules CH 3 NH 2 CH 2 NH 2 NH 3 CH 2 NH HNO NH 2 N 2 H CHNH NO NO N 2 HCN NO NH NO NO N 2 CN HNCO NO N 2 O NCO N NO Reduction Methods Skeletal Mechanism Sensitivity analysis Redundant species: species that are considered unimportant for the mechanism, due to the very small amounts of formation and destruction A species with low reaction flow is not necessarily redundant. Influence on important combustion parameters has to be measured Non-redundant species: sensitive species, fuel, oxidizer and products Species with high sensitivities are non-redundant, independent of the reaction flows 7
8 Reduction Methods Skeletal Mechanism Developed form of the sensitivity analysis Sensitivity of species B on temperature T: N = r ' dt SB, T νb, r dω r= 1 r N r ω r ν B,r : number of reactions : reaction velocity of reaction r : stoichiometric coefficient of species B in reaction r Reduction Methods Skeletal Mechanism Reaction flow analysis Redundant species: species that are considered unimportant for the mechanism, due to the very low rates of formation and consumption Gives the atomic mass flow through the given reactions This is used to detect redundant species in the mechanism, for differently defined levels of mass flow 8
9 Reduction Methods Skeletal Mechanism Developed form of the reaction flow analysis Relative importance of the species i N s N s Si, r Ii = max I j f ji, I jcji, max( S ) j= 1 j= 1 i, r Nr a N l, i r a ωrνi, r' ν j r'' l, i, a Ns Ns ωrν i, r'' ν j, r' = l r al r = ' j r al j = '' f = r 1, a j, i, ν,, ν j, r al, j N = r= 1 l, r r j= 1 j= 1 cj, i '' Nr ωrν j, r a r= 1 l, r : number of atom l turned over in reaction r ωrν j, r' r= 1 : formation of species j from species i c ji : consumption of species j to species i f ji 0< I i <100 0<(c ji,f ji )<1 ω r = reaction velocity of reaction r [mole/cm 3 s] ν i = stoichiometric coefficient of the reactant i ν i = stoichiometric coefficient of the product i a l,i = number of atom l in species i N r : number of reactions Reduction Methods Skeletal Mechanism Sensitivity and reaction flow in one: species importance N = r d S ' T B, T νb, r dω r= 1 r I i N s N s S i r j c, max I j f ji, I ji, max( S ) j= 1 j= 1 i, r = E D c E, A f E, A A C B 9
10 Reduction Methods Skeletal mechanism > Reduced mechanism The elimination of redundant species from the detailed mechanisms generally speeds up the calculations. The skeletal mechanisms can be used as starting mechanism for further reduction. In this way, some mathematical difficulties will be eliminated in further reduction procedure. Reduction Methods Fitting to measurements Pros: Compact and reliable Measurement Global mechanism Cons: Restricted range of conditions Equipment intensive Easily measurable species only Detailed mechanism Skeletal mechanism Systematic reduction Reduced mechanism Pros: Versatility of detailed mechanism Standard procedure for recalculation Automation possibility Cons: Expertise and labour intensive for manual calculation 10
11 Reduction Methods Reduced Mechanism CSP (Computational Singular Perturbation) Demands high computational capacity ILDM (Intrinsic Low Dimensional Manifolds) Usable for simple fuels, needs high memory because of tabulation QSSA (Quasi Steady State Approximation): The evaluation of the rate equations is very fast. Applicable for a wide range of conditions and for complex fuels. Ref: Turanyi, T., 25th Symposium on Combustion, The Combustion Institute, , Reduction Methods Reduced Mechanism Lifetime analysis A measure of species lifetimes is taken from the diagonal elements of the Jacobian matrix of the chemical source terms. It is assumed that the species with the lifetime shorter than and mass-fraction less than specified limits are in steady state. For the steady state species, no partial differential equation needs to be solved. 11
12 Reduction Methods Reduced Mechanism Species lifetime from diagonal elements of thejacobian matrix: τ = i 1 J ii A fast reaction with a short-lived species => reduction by steadystate assumption: N r N s ν ν j r i j [ X j ],, kr r = 1 j = 1 [ X i ] = N r N s ν ν j r i, j [ X j ], kr r = 1 j = 1 j i X i : molefraction of species i, k r : reaction rate of reaction r ν i,j : stoichiometric coefficient of species i in reaction r N s : number of species, N r : number of reactions Reduction Methods Reduced Mechanism Species lifetimes and reduction by QSSA: A fast reversible reaction with a short-lived species CH 3 + OH CH 3 O + H Quasi Steady-State Assumption (QSSA): [ CHO 3 ] = [ CH3 ][ OH] kf [ CHO 3 ][ H] k r = 0 t [ CH k 3 ][ OH ] f [ CH3 O ] = [ H ] k An explicit algebraic expression (which is easily calculated) => the species can be removed from the set of differential equations r 12
13 Physical Model The two-zone model* Flame front Propagation Burned gas Unburned gas Piston 0-dimensional, time-dependent model 2 zones in model burned gas zone unburned gas zone Reaction zone calculated as discontinuity between burned and unburned gas zone * Hajireza et al., COMODIA 98,Kyoto,1998 Equations for Unburned Gas Species balance equation dy j, u Nr ρ u = M j, u ν j, k dt k= 1 ω k Energy balance equation ρ c u p u N s hj J= 1 N r j, u ν j k k= 1, dtu dp = M dt dt A ωk + α V w u ( T T ) w u 13
14 Equations for Burned Gas Species balance equation: dy ρb dt j, b = M N r j, b k= 1 ν j, k m& ωk + ρb m b b ( Y Y ) j, f j, b Energy balance equation: ρ c b p b 4 ( h h ) σεt N s N r m& N s,, 1,, 1, b hj bm j b ν j kωk + ρb Yj j 1, f j= k= m j f j b b b = dtb dp = dt dt The Pressure History The ideal gas law: p mrt + mrt b b b u u u = Vtotal The Wiebe function*: m total θ θ0 xb = 1 exp b m b θ n+ 1 *Heywood, J.B., Internal Combustion Engine Fundamentals, McGraw Hill, Singapore,
15 Kinetic Model The chemical kinetic mechanism for primary reference fuels (PRF) is based on a detailed mechanism for C 1 -C * 4 hydrocarbons, extended with a simplified model for C 5 -C * * 8 hydrocarbons. The detailed mechanism involves 510 chemical reactions and 75 species. The RON-number of the fuel is an adjustable input parameter. Skeletal and reduced mechanisms for the oxidation of n-heptane and iso-octane under engine knock conditions will be generated automatically by using the automatic reduction method explained. * Chevalier, C., Ph.D.-Thesis, Universität Stuttgart, Germany, ** Müller, U.C, Ph.D.-Thesis, RWTH Aachen, Germany, 1993 Engine Specifications Engine parameters -Initial values, Boundary conditions, Fuel Composition* Compression ratio 5.6:1 Engine speed 1500 rpm Timing of ignition -10 CAD BTDC Combustion duration 50 CAD Equivalence ratio 1.0 End-gas temperature K, at 42.3 CAD BTDC Wall temperature 300K Pressure 3.95 bar, 42.3 CAD BTDC Fuel composition 40% n-heptane 60% iso-octane * Research engine in Chalmers University (CTH) in Göteborg 15
16 Knock Detection and Unburned Gas Temp Measurement Pressure transducer location Occurrence of knock is measured by a pressure transducer End-gas temperature is measured by rotational CARS* Spark plug locations *Bood et al., SAE Paper No: , Validation of Detailed Mechanism Calculated first ignition delay for n-heptane and iso-octane in comparison with the experimental results, respectively* ignition delay time (ms) experiments calculations /T (1/K) ignition delay time (ms) *Fieweger et al., Combustion and Flame, 109, , calculated measured /T (1/K) 16
17 Validation of Detailed Mechanism Comparison between calculated temperature in unburned zone with the experimental results* 1000 Temperature (K) Ti = 607 K Ti = 574 K Ti = 527 K Crank angle degree (CAD) *Bood et al., SAE Paper No: , Results Sensitivity of Radicals for Different RON Numbers Skeletal Mechanisms 2500 initial temperature = 900 K, RON number = initial temperature = 900 K, RON number = 78 temperature change [K] OH H 2 O 2 HO 2 CH 3 temperature change [K] OH H 2 O 2 HO 2 CH crank angle [CAD] crank angle [CAD] 17
18 Results Sensitivity of Combustion Intermediate Species for Different RON Numbers Skeletal Mechanisms temperature change [K] initial temperature = 900 K, RON number = 60 CH 2 O C H 2 4 C H 3 5 A-C H 8 17 I-C H 4 8 C H 2 6 temperature change [K] initial temperature = 900 K, RON number = 78 CH O 2 C H 2 4 C 3 H 5 A-C 8 H 17 I-C H 4 8 C 2 H crank angle [CAD] crank angle [CAD] Results Skeletal Mechanisms Species reduced for different levels of relative importance I Species 5.0% 10.0% 12.0% 15.0% 20% Skel. CH 3O 2H R R R R R R C 2H R R R R R R CH 2CO R R R R R R OCHCHO R R R R R R C 3H 6O R R R R R R CH 2OH R R R R R CH 3O 2 R R R R R CH 2CHO R R R R R C 3H 8 R R R R R CH 3OH R R R R 1C 7H 15O 2 R R R R 1HEOOH-2 R R R R Neo-C 5H 11 R R 1-C 7H 15 R Different pre-defined levels of relative importance, between 5% and 20.0%. Reactions, and the species occurring only in these reactions, were removed from the mechanism according to the table. The mechanism with 12.0% of relative importance is chosen as skeletal mechanism after validation procedure. 18
19 Results Skeletal Mechanisms Calculated molefraction profiles for hydroxyl and hydroperoxyl radicals OH molefraction initial temperature = 800 K detailed 5% 10% 12% 15% 20% HO 2 molefraction initial temperature = 800 K detailed 5% 10% 12% 15% 20% crank angle (CAD) crank angle (CAD) Results Skeletal Mechanisms Calculated molefraction profiles for iso-octane and n-heptane showing the fuel decomposition i-c8h18 molefraction initial temperature = 800 K detailed 5% 10% 12% 15% 20% crank angle (cad) n-c7h16 molefraction initial temperature = 800 K detailed 5% 10% 12% 15% 20% crank angle (CAD) 19
20 Results Skeletal Mechanismsh Calculated temperature profiles for autoignition in the end-gas temperature [K] initial temperature = 1100 K detailed 5% 10% 12% 15% 20% crank angle [CAD] Calculated difference in the occurrence of maximum heat release change in autoignition time (CAD) % 10% 12% 15% 20% initial temperature (K) 1300 Results Species Lifetimes species OC8H15O HOOC8OOH OOC8OOH AOEOOH-2 AC8H17O2 C-C8H17 A-C8H17 OC7H13O HOOC7OOH OOC7OOH 2HEOOH-1 1HEOOH-2 2C7H15O2 1C7H15O2 2-C7H15 1-C7H15 T-C4H9 I-C4H9 I-C3H7 N-C3H7 C3H3 C2H5 CH3CO OCH2CHO C2H3 C2H CH2OH CH3O CH3 3-CH2 1-CH2 HCO CH OH O H 10 0 lifetime Reduced mechanisms Red-36 Red-24 Red-20 Red-19 Red-17 Reduced Mechanisms Species in the reduced mechanisms Species H, O, OH, HO2, H2O2, CH2O, CH3, CH4, HCCO, C2H2, C2H3, CH2CHOO, C2H4, CH3CHO, C2H6, C3H3, C3H4, C3H4P, C3H5, C3H6, i-c4h7, i-c4h8, n-c4h9, neo-c5h11, 1-C5H11, i-c6h13, n-c7h16, OC7OOH, i-c8h18, OC8OOH, CO, CO2, H2, H2O, O2; N2 OH, H2O2, CH2O, CH4, HCCO, C2H2, C2H4, CH3CHO, C2H6, C3H4, C3H4P, C3H6, i-c4h7, i-c4h8, n-c7h16, OC7OOH, i-c8h18, OC8OOH, CO, CO2, H2, H2O, O2, N2 CH2O, CH4, HCCO, C2H2, C2H4, CH3CHO, C2H6, C3H4, C3H4P, C3H6, i-c4h7, i-c4h8, n-c7h16, i-c8h18, CO, CO2, H2, H2O, O2, N2 CH2O, CH4, C2H2, C2H4, CH3CHO, C2H6, C3H4, C3H4P, C3H6, i-c4h7, i-c4h8, n-c7h16, i-c8h18, CO, CO2, H2, H2O, O2, N2 CH2O, CH4, C2H2, C2H4, C2H6, C3H4, C3H4P, C3H6, i-c4h8, n-c7h16, i-c8h18, CO, CO2, H2, H2O, O2, N2 20
21 Results Reduced Mechanisms Molefraction profiles for CO and CH 2 O calculated by QSSA-reduced mechanisms CO molefraction det-74 skl-62 red-36 red-24 red-20 red-19 red crank angle (cad) CH 2 O molefraction det-74 skl-62 red-36 red-24 red-20 red-19 red crank angle (cad) Results Reduced Mechanisms Fuel decomposition calculated by QSSA-reduced mechanisms i-c 8 H 18 molefraction det-74 skl-62 red-36 red-24 red-20 red-19 red-17 n-c 7 H 16 molefraction det-74 skl-62 red-36 red-24 red-20 red-19 red crank angle (cad) crank angle (cad) 21
22 Results Reduced Mechanisms Calculated temperature profiles for autoignition in the end-gas Calculated difference in the occurrence of maximum heat release temperature [K] det-74 skl-62 red-36 red-24 red-20 red-19 red crank angle (cad) change in autoignition time (CAD) number of species Conclusions: Method An automatic reduction method for detailed chemical mechanisms proposed combines species sensitivity analysis with reaction flow analysis and lifetime analysis Sensitivity analysis finds important species in the chain reactions Reaction flow analysis gives an quantitative measure for the atomic mass flows Lifetime analysis identifies the species the Quasi Steady State Approximation is valid for 22
23 Conclusions: Mechanism Skeletal mechanism chosen: 12 of 74 species are found as redundant for an ignition process Reduced mechanism chosen: 41 of the remaning 62 species are found to be in steady state over the full parameter range Further work required to use reduced mechanisms with CFD web.itu.edu.tr /sorusbay/si/si.htm 23
Chemical Kinetics of HC Combustion
Spark Ignition Engine Combustion MAK65E Chemical Kinetics of HC Combustion Prof.Dr. Cem Soruşbay Istanbul Technical University Chemical Kinetics of HC Combustion Introduction Elementary reactions Multi-step
More informationMauro Valorani Dipartimento di Meccanica e Aeronautica, University of Rome
Classification of ignition regimes in thermally stratified n-heptane-air air mixtures using computational singular perturbation Saurabh Gupta, Hong G. Im Department of Mechanical Engineering, University
More informationCurrent progress in DARS model development for CFD
Current progress in DARS model development for CFD Harry Lehtiniemi STAR Global Conference 2012 Netherlands 20 March 2012 Application areas Automotive DICI SI PPC Fuel industry Conventional fuels Natural
More informationWILLKOMMEN WELCOME VÄLKOMMEN BENVIDO BIENVENIDO VELKOMMEN DOBRO DOSLI KARIBU WELKOM BENVENUTO SELAMAT DATANG BIENVENUE CROESO SOO DHAWOW NAMASTE
WELCOME VÄLKOMMEN BIENVENIDO DOBRO DOSLI WELKOM SELAMAT DATANG CROESO NAMASTE WILLKOMMEN BENVIDO VELKOMMEN KARIBU BENVENUTO BIENVENUE SOO DHAWOW 2016 Convergent Science. All Rights Reserved Combustion
More informationModelling of Gasoline Combustion using ECFM-3Z With STAR-CD V4 Investigation on spark modelling with AKTIM and Knock. Your subtitle goes here
Modelling of Gasoline Combustion using ECFM-3Z With STAR-CD V4 Investigation on spark modelling with AKTIM and Knock Your subtitle goes here TOPICS SI modelling with ECFM-3Z Fundamental and Numerics KNOCK
More informationCH 4 /NO x Reduced Mechanisms Used for Modeling Premixed Combustion
Energy and Power Engineering, 2012, 4, 264-273 http://dx.doi.org/10.4236/epe.2012.44036 Published Online July 2012 (http://www.scirp.org/journal/epe) CH 4 /NO x Reduced Mechanisms Used for Modeling Premixed
More informationP. Pepiot-Desjardins a & H. Pitsch a a Department of Mechanical Engineering, Stanford University, CA, Available online: 15 Nov 2008
This article was downloaded by: [Cornell University] On: 21 February 2012, At: 06:42 Publisher: Taylor & Francis Informa Ltd Registered in England and Wales Registered Number: 1072954 Registered office:
More informationA first investigation on using a species reaction mechanism for flame propagation and soot emissions in CFD of SI engines
A first investigation on using a 1000+ species reaction mechanism for flame propagation and soot emissions in CFD of SI engines F.A. Tap *, D. Goryntsev, C. Meijer, A. Starikov Dacolt International BV
More informationDARS overview, IISc Bangalore 18/03/2014
www.cd-adapco.com CH2O Temperatur e Air C2H4 Air DARS overview, IISc Bangalore 18/03/2014 Outline Introduction Modeling reactions in CFD CFD to DARS Introduction to DARS DARS capabilities and applications
More informationSystematic Reduction of Large Chemical Mechanisms
4th Joint Meeting of the U.S. Sections of the Combustion Institute, Philadelphia, PA, 2005 Systematic Reduction of Large Chemical Mechanisms Perrine Pepiot and Heinz Pitsch Department of Mechanical Engineering,
More informationDevelopment of Reduced Mechanisms for Numerical Modelling of Turbulent Combustion
Worshop on Numerical Aspects of Reduction in Chemical Kinetics CERMICS-ENPC Cite Descartes - Champus sur Marne, France, September 2nd, 1997 Abstract Development of Reduced Mechanisms for Numerical Modelling
More informationTOPICAL PROBLEMS OF FLUID MECHANICS 97
TOPICAL PROBLEMS OF FLUID MECHANICS 97 DOI: http://dx.doi.org/10.14311/tpfm.2016.014 DESIGN OF COMBUSTION CHAMBER FOR FLAME FRONT VISUALISATION AND FIRST NUMERICAL SIMULATION J. Kouba, J. Novotný, J. Nožička
More informationCOMBUSTION CHEMISTRY COMBUSTION AND FUELS
COMBUSTION CHEMISTRY CHEMICAL REACTION AND THE RATE OF REACTION General chemical reaction αa + βb = γc + δd A and B are substracts and C and are products, α, β, γ and δ are stoichiometric coefficients.
More informationDevelopment and Validation of a Turbulent Flame Propagation Model
Development and Validation of a Turbulent Flame Propagation Model Thesis for Master of Science by Simon Bjerkborn Lund Combustion Engineering LOGE AB and Physics Department Lund University Examiner: Carl-Erik
More informationIMPLEMENTATION OF REDUCED MECHANISM IN COMPLEX CHEMICALLY REACTING FLOWS JATHAVEDA MAKTAL. Submitted in partial fulfillment of the requirements
IMPLEMENTATION OF REDUCED MECHANISM IN COMPLEX CHEMICALLY REACTING FLOWS by JATHAVEDA MAKTAL Submitted in partial fulfillment of the requirements For the degree of Master of Science in Aerospace Engineering
More informationCombustion Theory and Applications in CFD
Combustion Theory and Applications in CFD Princeton Combustion Summer School 2018 Prof. Dr.-Ing. Heinz Pitsch Copyright 201 8 by Heinz Pitsch. This material is not to be sold, reproduced or distributed
More informationFuel and Air Flow in the Cylinder
Chapter 6 Fuel and Air Flow in the Cylinder 6.1) A four cylinder four stroke 3.0 L port-injected spark ignition engine is running at 00 rpm on a stoichiometric mix of octane and standard air at 100 kpa
More informationMicro flow reactor with prescribed temperature profile
The First International Workshop on Flame Chemistry, July 28-29, 2012, Warsaw, Poland Micro flow reactor with prescribed temperature profile Toward fuel Indexing and kinetics study based on multiple weak
More informationDevelopment of Reduced Chemistry for Efficient Combustion Simulations
University of Connecticut DigitalCommons@UConn Master's Theses University of Connecticut Graduate School 4-13-2016 Development of Reduced Chemistry for Efficient Combustion Simulations Yufeng Liu yufengliu812@gmail.com
More informationStrategies for Using Detailed Kinetics in Engine Simulations
Strategies for Using Detailed Kinetics in Engine Simulations Ellen Meeks ERC Symposium: Fuels for Future IC Engines June 6-7, 2007 Madison, Wisconsin Outline Role of simulation in design Importance of
More informationTowards regime identification and appropriate chemistry tabulation for computation of autoigniting turbulent reacting flows
Center for Turbulence Research Annual Research Briefs 009 199 Towards regime identification and appropriate chemistry tabulation for computation of autoigniting turbulent reacting flows By M. Kostka, E.
More informationWORKSHOP Saint Denis La Plaine, November Mechanism Reduction: Methodologies and Examples
SAFe and Efficient hydrocarbon oxidation processes by KINetics and Explosion expertise and development of computational process engineering tools Project No. EVG1-CT-2002-00072 WORKSHOP Saint Denis La
More informationLaminar Premixed Flames: Flame Structure
Laminar Premixed Flames: Flame Structure Combustion Summer School 2018 Prof. Dr.-Ing. Heinz Pitsch Course Overview Part I: Fundamentals and Laminar Flames Introduction Fundamentals and mass balances of
More informationChemical Kinetic Reaction Mechanisms
Chemical Kinetic Reaction Mechanisms Charles Westbrook Lawrence Livermore National Laboratory May 31, 2008 J. Warnatz Memorial Colloquium How do we measure a career? In scientific careers, we look for
More informationFuel, Air, and Combustion Thermodynamics
Chapter 3 Fuel, Air, and Combustion Thermodynamics 3.1) What is the molecular weight, enthalpy (kj/kg), and entropy (kj/kg K) of a gas mixture at P = 1000 kpa and T = 500 K, if the mixture contains the
More informationNumerical Investigation of Ignition Delay in Methane-Air Mixtures using Conditional Moment Closure
21 st ICDERS July 23-27, 27 Poitiers, France Numerical Investigation of Ignition Delay in Methane-Air Mixtures using Conditional Moment Closure Ahmad S. El Sayed, Cécile B. Devaud Department of Mechanical
More informationUse of detailed kinetic mechanism for the prediction of autoignitions
Use of detailed kinetic mechanism for the prediction of autoignitions F. Buda, P.A. Glaude, F. Battin-Leclerc DCPR-CNRS, Nancy, France R. Porter, K.J. Hughes and J.F. Griffiths School of Chemistry, University
More informationDARS Digital Analysis of Reactive Systems
DARS Digital Analysis of Reactive Systems Introduction DARS is a complex chemical reaction analysis system, developed by DigAnaRS. Our latest version, DARS V2.0, was released in September 2008 and new
More informationModeling of Gasoline Direct Injection Spark Ignition Engines. Chen Huang, Andrei Lipatnikov
Modeling of Gasoline Direct Injection Spark Ignition Engines, Andrei Lipatnikov Background Volvo V40 XC Delphi-GDI-System CFD simulation of GDI combustion Hyundai 1.6 l GDI engine Background Model development
More informationCombustion: Flame Theory and Heat Produced. Arthur Anconetani Oscar Castillo Everett Henderson
Combustion: Flame Theory and Heat Produced Arthur Anconetani Oscar Castillo Everett Henderson What is a Flame?! Reaction Zone! Thermo/Chemical characteristics Types of Flame! Premixed! Diffusion! Both
More informationNUMERICAL INVESTIGATION OF IGNITION DELAY TIMES IN A PSR OF GASOLINE FUEL
NUMERICAL INVESTIGATION OF IGNITION DELAY TIMES IN A PSR OF GASOLINE FUEL F. S. Marra*, L. Acampora**, E. Martelli*** marra@irc.cnr.it *Istituto di Ricerche sulla Combustione CNR, Napoli, ITALY *Università
More informationTransported PDF Calculations of Combustion in Compression- Ignition Engines
International Multidimensional Engine Modeling User s Group Meeting at the SAE Congress Detroit, MI 15 April 2013 Transported PDF Calculations of Combustion in Compression- Ignition Engines V. Raj Mohan
More informationThe comprehensive modelling of n-heptane / iso-octane oxidation by a skeletal mechanism using the Chemistry Guided Reduction approach
The comprehensive modelling of n-heptane / iso-octane oxidation by a skeletal mechanism using the Chemistry Guided Reduction approach L. Seidel 1, F. Bruhn 1, S. S. Ahmed 1, G. Moréac 2, T. Zeuch 3*, and
More informationMathematical Investigation and Modeling of Pressure and Temperature Variation Inside a Si Engine
International Journal of Multidisciplinary and Current Research Research Article ISSN: 2321-3124 Available at: http://ijmcr.com Mathematical Investigation and Modeling of Pressure and Temperature Variation
More informationLecture 2. Chemical Kinetics. Chemical Kinetics 6/26/11. One (elementary) step reaction
Lecture Chemical Kinetics 1 One (elementary) step reaction im i i M i is the number of species i, i are the stoichiometric coefficients i i Chemical Kinetics =0ifi is not a reactant =0ifi is not a product
More informationSIMULATION OF COMBUSTION
SIMULATION OF COMBUSTION OUTLINE SPARK IGNITION MODEL COMBUSTION MODEL KNOCK MODEL ANALYSIS OF CYCLE BY CYCLE VARIABILITY OUTLINE SPARK IGNITION MODEL COMBUSTION MODEL KNOCK MODEL ANALYSIS OF CYCLE BY
More informationSimulation of H 2 O 2 Constant Volume Combustion using Comsol Multiphysics
THE PENNSYLVANIA STATE UNIVERSITY ENERGY AND GEO ENVIRONMENTAL ENGINEERING MATHEMATICAL METHODS FOR ENERGY SYSTEMS PROF. DEREK ELSWORTH Simulation of H 2 O 2 Constant Volume Combustion using Comsol Multiphysics
More informationDetailed Chemical Kinetics in Multidimensional CFD Using Storage/Retrieval Algorithms
13 th International Multidimensional Engine Modeling User's Group Meeting, Detroit, MI (2 March 23) Detailed Chemical Kinetics in Multidimensional CFD Using Storage/Retrieval Algorithms D.C. Haworth, L.
More informationImperial College London. Department of Mechanical Engineering
Imperial College London Department of Mechanical Engineering An Approach to the Automatic Generation of Reduced Chemical Mechanisms using Computational Singular Perturbation (CSP) and Rate-Controlled Constrained
More informationComparative Study of Kinetic Mechanisms for Natural Gas Combustion in an Internal Combustion Engine
Comparative Study of Kinetic Mechanisms for Natural Gas Combustion in an Internal Combustion Engine MUHAMMAD MANSHA*, ANWAR RASHEED SALEEMI**, AND JAMAL GUL* RECEIVED ON 06.09.2008 ACCEPTED ON 04.03.2009
More informationTemperature distribution and heat flow across the combustion chamber wall.
ΜΕΤΑΔΟΣΗ ΘΕΡΜΟΤΗΤΑΣ ΣΤΟΝ ΚΥΛΙΝΔΡΟ (J.B. Heywood: Internal Combustion Engine Fundamentals McGraw Hill 1988) Temperature distribution and heat flow across the combustion chamber wall. Throughout each engine
More informationLecture 6 Asymptotic Structure for Four-Step Premixed Stoichiometric Methane Flames
Lecture 6 Asymptotic Structure for Four-Step Premixed Stoichiometric Methane Flames 6.-1 Previous lecture: Asymptotic description of premixed flames based on an assumed one-step reaction. basic understanding
More informationComputer Aided Detailed Mechanism Generation for Large Hydrocarbons: n-decane
23 rd ICDERS July 24 29, 2011 Irvine, USA Computer Aided Detailed Mechanism Generation for Large Hydrocarbons: n-decane Martin Hilbig 1, Lars Seidel 1, Xiaoxiao Wang 1, Fabian Mauss 1 and Thomas Zeuch
More informationAME 513. " Lecture 8 Premixed flames I: Propagation rates
AME 53 Principles of Combustion " Lecture 8 Premixed flames I: Propagation rates Outline" Rankine-Hugoniot relations Hugoniot curves Rayleigh lines Families of solutions Detonations Chapman-Jouget Others
More informationChemical Kinetics: NOx Mechanisms
Mole Fraction Temperature (K) Chemical Kinetics: Nx Mechanisms Jerry Seitzman. 5.15.1.5 CH4 H HC x 1 Temperature Methane Flame.1..3 Distance (cm) 15 1 5 KineticsNx -1 Nx Formation Already pointed out that
More informationDevelopment of One-Step Chemistry Models for Flame and Ignition Simulation
Development of One-Step Chemistry Models for Flame and Ignition Simulation S.P.M. Bane, J.L. Ziegler, and J.E. Shepherd Graduate Aerospace Laboratories California Institute of Technology Pasadena, CA 91125
More informationIgnition. Jerry Seitzman. Temperature (K) School of Aerospace Engineering Review. stable/steady self-sustained propagation of premixed flames
Mole Fraction Temperature (K) Ignition Jerry Seitzman 0. 500 0.5 000 0. 0.05 0 CH4 HO HCO x 000 Temperature Methane Flame 0 0. 0. 0. Distance (cm) 500 000 500 0 Ignition - Review So far, examined stable/steady
More informationA G-equation Combustion Model Incorporating Detailed Chemical Kinetics for PFI/DI SI Engine Simulations
Sixteenth International Multidimensional Engine Modeling User s Group Meeting at the SAE Congress, April 2, 2006, Detroit, Michigan A G-equation Combustion Model Incorporating Detailed Chemical Kinetics
More informationOn Computing Reactive Flows Using Slow Manifolds
On Computing Reactive Flows Using Slow Manifolds by S. Paolucci 1, J. M. Powers 2, and S. Singh 3 Department of Aerospace and Mechanical Engineering University of Notre Dame Notre Dame, Indiana 46556-5637,
More informationUC Berkeley UC Berkeley Electronic Theses and Dissertations
UC Berkeley UC Berkeley Electronic Theses and Dissertations Title Fundamental Interactions in Gasoline Compression Ignition Engines with Fuel Stratification Permalink https://escholarship.org/uc/item/015933zs
More informationExploration of Homogeneous Charge Compression. Ignition in a 100 cc 2-Stroke Motorcycle Engine
Exploration of Homogeneous Charge Compression Ignition in a 100 cc 2-Stroke Motorcycle Engine by Yi-Hann Chen B.S. (National Chung-Hsing University, Taiwan) 2001 A thesis submitted in partial satisfaction
More informationExperimental study of the combustion properties of methane/hydrogen mixtures Gersen, Sander
University of Groningen Experimental study of the combustion properties of methane/hydrogen mixtures Gersen, Sander IMPORTANT NOTE: You are advised to consult the publisher's version (publisher's PDF)
More informationLire la première partie de la thèse
Lire la première partie de la thèse Chapter 3 Dual-CM engine validation In this chapter, the dual-cm, developed in chapter 2, is validated against two types of results : experimental data from engine test-bench
More informationTarget Species Selection for Dynamic Adaptive Chemistry Simulations
University of Connecticut DigitalCommons@UConn Master's Theses University of Connecticut Graduate School 5-9-2014 Target Species Selection for Dynamic Adaptive Chemistry Simulations Nicholas Curtis nicholas.curtis@uconn.edu
More informationAsymptotic Structure of Rich Methane-Air Flames
Asymptotic Structure of Rich Methane-Air Flames K. SESHADRI* Center for Energy and Combustion Research, Department of Mechanical and Aerospace Engineering, University of California at San Diego, La Jolla,
More informationMild Ignition Phenomena in Rapid Compression Machines
25 th ICDERS August 2 7, 2015 Leeds, UK Kevin P. Grogan a, S. Scott Goldsborough b, Matthias Ihme a a Stanford University, Stanford, CA 94305 b Argonne National Laboratory, Argonne, IL 60439 1 Introduction
More informationEfficient Engine CFD with Detailed Chemistry
www.cd-adapco.com Efficient Engine CFD with Detailed Chemistry Harry Lehtiniemi and Rajesh Rawat CD-adapco Karin Fröjd and Fabian Mauss Digital Analysis of Reaction Systems Challenges in CFD engine modeling
More informationTurbulent Premixed Combustion
Turbulent Premixed Combustion Combustion Summer School 2018 Prof. Dr.-Ing. Heinz Pitsch Example: LES of a stationary gas turbine velocity field flame 2 Course Overview Part II: Turbulent Combustion Turbulence
More informationDeliverable 38. Reduced Kinetic Models for Different Classes of Problems
SAFEKINEX SAFe and Efficient hydrocarbon oxidation processes by KINetics and Explosion expertise and development of computational process engineering tools roject No. EVG1-CT-22-72 Work ackage 5 Kinetic
More informationDirect numerical simulations of ignition of a lean n- heptane/air mixture with temperature inhomogeneities at constant volume: Parametric study
University of Nebraska - Lincoln DitalCommons@University of Nebraska - Lincoln US Department of Energy Publications U.S. Department of Energy Direct numerical simulations of nition of a lean n- heptane/air
More informationEXTINCTION AND AUTOIGNITION OF n-heptane IN COUNTERFLOW CONFIGURATION
Proceedings of the Combustion Institute, Volume 8, 000/pp. 09 037 EXTINCTION AND AUTOIGNITION OF n-heptane IN COUNTERFLOW CONFIGURATION R. SEISER, 1 H. PITSCH, 1 K. SESHADRI, 1 W. J. PITZ and H. J. CURRAN
More informationTHE HEAT TRANSFER COEFFICIENT CALCULATION IN THE ICE CYLINDER BASED ON IN-CYLINDER PRESSURE DATA
Journal of KONES Powertrain and Transport, Vol. 2, No. 4 213 THE HEAT TRANSFER COEFFICIENT CALCULATION IN THE ICE CYLINDER BASED ON IN-CYLINDER PRESSURE DATA Grzegorz Przybya, Stefan Postrzednik, Zbigniew
More informationHIGH PRESSURE METHANE-OXYGEN COMBUSTION KINETIC ANALYSIS
HIGH PRESSURE METHANE-OXYGEN COMBUSTION KINETIC ANALYSIS G. Saccone*, P. Natale*, F. Battista* g.saccone@cira.it p.natale@cira.it f.battista@cira.it *CIRA Italian Aerospace Research Centre, Capua Italy,
More informationTHE ROLE OF SENSITIVITY ANALYSIS IN MODEL IMPROVEMENT
Energy and Resources Research Institute School of something FACULTY OF OTHER Faculty of Engineering THE ROLE OF SENSITIVITY ANALYSIS IN MODEL IMPROVEMENT Alison S. Tomlin Michael Davis, Rex Skodje, Frédérique
More informationCombustion Chemistry of a New Biofuel: Butanol
Combustion Chemistry of a New Biofuel: Butanol William H. Green, D.F. Davidson, F. Egolfopoulos, N. Hansen, M. Harper, R.K. Hanson, S. Klippenstein, C.K. Law, C.J. Sung, D.R. Truhlar, & H. Wang Assessing
More informationGLOBAL KINETICS FOR n-heptane IGNITION AT HIGH PRESSURES
Twenty-Fourth Symposium (International) on Combustion/The Combustión Institute, 1992/pp. 777-784 GLOBAL KINETICS FOR n-heptane IGNITION AT HIGH PRESSURES U. C. MÜLLER AND N. PETERS Instituí für Technische
More informationUQ in Reacting Flows
UQ in Reacting Flows Planetary Entry Simulations High-Temperature Reactive Flow During descent in the atmosphere vehicles experience extreme heating loads The design of the thermal protection system (TPS)
More informationNumerical simulation study of turbulent combustion phenomena -INTEGRATE Advanced Study Group (ASG)
Numerical simulation study of turbulent combustion phenomena -INTEGRATE Advanced Study Group (ASG) Rixin Yu Division of fluid Mechanics Department of Energy Science LTH 1 Introduction Some combustion related
More informationCFD modeling of combustion of a natural gas Light-Duty Engine
Available online at www.sciencedirect.com Energy Procedia 00 (2018) 000 000 www.elsevier.com/locate/procedia 73rd Conference of the Italian Thermal Machines Engineering Association (ATI 2018), 12-14 September
More informationCalculation of the power cycle of hydrogen IC engines
Calculation of the power cycle of hydrogen IC engines S. Verhelst a*, S. Verstraeten b, R. Sierens a a Ghent University; Department of Flow, Heat and Combustion Mechanics; Sint-Pietersnieuwstraat 41, B-9000
More informationA MULTI-ZONE REACTION-BASED DIESEL COMBUSTION MODEL FOR MODEL-BASED CONTROL
Proceedings of the ASME 217 Dynamic Systems and Control Conference DSCC217 October 11-13, 217, Tysons, Virginia, USA DSCC217-574 A MULTI-ZONE REACTION-BASED DIESEL COMBUSTION MODEL FOR MODEL-BASED CONTROL
More informationModeling for Control of HCCI Engines
Modeling for Control of HCCI Engines Gregory M. Shaver J.Christian Gerdes Matthew Roelle P.A. Caton C.F. Edwards Stanford University Dept. of Mechanical Engineering D D L ynamic esign aboratory Outline
More informationEFFECT OF CARBON DIOXIDE, ARGON AND HYDROCARBON FUELS ON THE STABILITY OF HYDROGEN JET FLAMES
EFFECT OF CARBON DIOXIDE, ARGON AND HYDROCARBON FUELS ON THE STABILITY OF HYDROGEN JET FLAMES Wu, Y 1, Al-Rahbi, I. S. 1, Lu, Y 1. and Kalghatgi, G. T. 2 1 Department of Chemical and Process Engineering,
More informationAsymptotic Analysis of the Structure of Moderately Rich Methane-Air Flames
Asymptotic Analysis of the Structure of Moderately Rich Methane-Air Flames K. SESHADRI,* X. S. BAI,** H. PITSCH, and N. PETERS Institut für Technische Mechanik, RWTH Aachen, D-52056 Aachen, Federal Republic
More informationIgnition delay-time study of fuel-rich CH 4 /air and CH 4 /additive/air mixtures over a wide temperature range at high pressure
25 th ICDERS August 2 7, 2015 Leeds, UK Ignition delay-time study of fuel-rich CH 4 /air and CH 4 /additive/air mixtures over a wide temperature range at high pressure Jürgen Herzler, Mustapha Fikri, Oliver
More informationStructure and chemical kinetics of flames supported by nitrogen oxides*
Pure & Appl. Chern., Vol. 65, No. 2, pp. 277-283, 1993. Printed in Great Britain. @ 1993 IUPAC Structure and chemical kinetics of flames supported by nitrogen oxides* MELVYN C. BRANCH and JOSEPH J. COR
More informationA probability density function/flamelet method for partially premixed turbulent combustion
Center for Turbulence Research Proceedings of the Summer Program 2000 145 A probability density function/flamelet method for partially premixed turbulent combustion By D. C. Haworth A methodology is formulated
More informationREDUCED CHEMICAL KINETIC MECHANISMS FOR HYDROCARBON FUELS
REDUCED CHEMICAL KINETIC MECHANISMS FOR HYDROCARBON FUELS Christopher J. Montgomery 1, Marc A. Cremer 2 Jyh-Yuan Chen 3, Charles K. Westbrook 4, and Lourdes Q. Maurice 5 1 Corresopnding Author Senior Engineer
More informationIntroduction to laser-based combustion diagnostics
Introduction to laser-based combustion diagnostics (Lecture 1b) Lecture prepared for course in laser-based combustion diagnostics by Per-Erik Bengtsson and Joakim Bood Division of Combustion Physics at
More informationKinetic study of combustion behavior in a gas turbine -Influence from varying natural gas composition
Kinetic study of combustion behavior in a gas turbine -Influence from varying natural gas composition Catharina Tillmark April 18, 2006 Lund University Dept. of Energy Sciences P.O.Box 118, SE-221 00 Lund
More informationOak Ridge National Laboratory
Copyright 2001 Society of Automotive Engineers, Inc. Oak Ridge National Laboratory We investigate lean-fueling cyclic dispersion in spark ignition engines in terms of experimental nonlinear mapping functions
More informationEffects of Hydrogen Addition on NOx Emissions in Hydrogen-Assisted Diesel Combustion
29 International Multidimensional Engine Modeling Users Group Meeting Detroit, MI, 19 April 29 Abstract Effects of Hydrogen Addition on NOx Emissions in Hydrogen-Assisted Diesel Combustion H. Zhang, G.K.
More informationStudy of CNG Combustion Under Internal Combustion Engines Conditions Part I: Using Quasi-Dimensional Modelling
Pertanika J. Sci. & Technol. 7 (2): 269 289 (2009) ISSN: 028-7680 Universiti Putra Malaysia Press Study of CNG Combustion Under Internal Combustion Engines Conditions Part I: Using Quasi-Dimensional Modelling
More informationPremixed, Nonpremixed and Partially Premixed Flames
Premixed, Nonpremixed and Partially Premixed Flames Flame (Reaction Zone) Flame (Reaction Zone) Flame (Reaction Zone) Fuel Air Fuel + Air φ 1 Products Fuel + Air φ > 1 F + A Air (+ F?) NONPREMIXED PREMIXED
More informationSimulation of Suction Process of Gasohol Fuelled S. I. Engine Using Computer Program
Simulation of Suction Process of Gasohol Fuelled S. I. Engine Using Computer Program MAHENDRAKUMAR MAISURIA, DIPAKKUMAR GOHIL & Dr. SALIM CHANNIWALA Department of Mechanical Engineering S. V. National
More informationModeling for Control of HCCI Engines
Modeling for Control of HCCI Engines Gregory M. Shaver J.Christian Gerdes Parag Jain Design Division Stanford, California 9435-421 Email: shaver@stanford.edu Design Division Stanford, California 9435-421
More informationHigh-Fidelity Simulation and Analysis of Ignition Regimes and Mixing Characteristics for Low Temperature Combustion Engine Applications
High-Fidelity Simulation and Analysis of Ignition Regimes and Mixing Characteristics for Low Temperature Combustion Engine Applications by Saurabh Gupta A dissertation submitted in partial fulfillment
More informationMechanism reduction for multicomponent surrogates: A case study using toluene reference fuels
Mechanism reduction for multicomponent surrogates: A case study using toluene reference fuels Niemeyer, K. E., & Sung, C. J. (2014). Mechanism reduction for multicomponent surrogates: a case study using
More informationWorkshop Paris, November 2006
SAFe and Efficient hydrocarbon oxidation processes by KINetics and Explosion expertise and development of computational process engineering tools Project No. EVG1-CT-2002-00072 Workshop Paris, November
More informationApplication of Model Fuels to Engine Simulation
Paper #E28 First published in: Topic: Engine 5 th US Combustion Meeting Organized by the Western States Section of the Combustion Institute and Hosted by the University of California at San Diego March
More informationHierarchical approach
Chemical mechanisms Examine (i) ways in which mechanisms are constructed, (ii)their dependence on rate and thermodynamic data and (iii) their evaluation using experimental targets Copyright 2011 by Michael
More informationModeling and Simulation of Plasma-Assisted Ignition and Combustion
Modeling and Simulation of Plasma-Assisted Ignition and Combustion Vigor Yang and Sharath Nagaraja Georgia Institute of Technology Atlanta, GA AFOSR MURI Fundamental Mechanisms, Predictive Modeling, and
More informationCHM1 Review for Exam 15
Topics 1. Organic Compounds a. Hydrocarbons i. Saturated alkanes (all single bonds) ii. Unsaturated alkenes and alkynes b. Functional Groups i. Alcohols ii. Organic Acids iii. Esters iv. Ethers v. Aldehydes
More informationOxidation of C 3 and n-c 4 aldehydes at low temperatures
Oxidation of C 3 and n-c 4 aldehydes at low temperatures M. Pelucchi*, A. Frassoldati*, E. Ranzi*, T. Faravelli* matteo.pelucchi@polimi.it * CRECK-Department of Chemistry, Materials and Chemical Engineering
More informationLaws of Thermodynamics
Laws of Thermodynamics The Three Laws of Thermodynamics - The first lawof thermodynamics, also called conservation of energy. We can use this knowledge to determine the amount of energy in a system, the
More informationCopyrighted by Gabriel Tang B.Ed., B.Sc.
Unit 5: Chemical Equations and Reactions & Stoichiometry Chemistry Chapter 9: Stoichiometry 9.1: Calculating Quantities in Reactions Avogadro s Number: - a group of (6.0 10 ) molecules = 1 mole Stoichiometry:
More informationA wide range kinetic modeling study of alkene oxidation
A wide range kinetic modeling study of alkene oxidation M. Mehl 1, T. Faravelli 1, E. Ranzi 1, A. Ciajolo 2, A. D'Anna 3, A. Tregrossi 2 1. CMIC-Politecnico di Milano ITALY 2. Istituto Ricerche sulla Combustione
More informationErratum to: High speed mixture fraction and temperature imaging of pulsed, turbulent fuel jets auto igniting in high temperature, vitiated co flows
DOI 10.1007/s00348-015-2101-9 ERRATUM Erratum to: High speed mixture fraction and temperature imaging of pulsed, turbulent fuel jets auto igniting in high temperature, vitiated co flows Michael J. Papageorge
More informationarxiv:nlin/ v1 [nlin.cd] 27 Dec 2002
Chaotic Combustion in Spark Ignition Engines arxiv:nlin/0212050v1 [nlin.cd] 27 Dec 2002 Miros law Wendeker 1, Jacek Czarnigowski, Grzegorz Litak 2 and Kazimierz Szabelski Department of Mechanics, Technical
More information