ROMEO ROMEO6 1x30mm FULL SIZE RED DOT SIGHT

Transcription

1 ELECTRO-OPTICS ROME06T shown ROMEO ROMEO6 1x30mm FULL SIZE RED DOT SIGHT OWNERS MANUAL

2 TABLE OF CONTENTS Introduction...3 Contents...4 Key Features...5 Configurations...6 Product Identification...8 Operation...10 Mounting The Sight...12 Sight Adjustments...13 Maintenance...14 Troubleshooting...14 Specifications...15 SIG SAUER Electro-Optics Infinite Guarantee SIG SAUER Electronic & Tritium Component Limited 5-Year Warranty This manual is available in the following languages: French, Spanish, German, Italian, Portuguese, Russian, Afrikaans, Swedish, and Norwegian. Please visit sigsauer.com for Owners Manual downloads. 2

3 sigsauer.com INTRODUCTION Congratulations on the purchase of your ROMEO6 Full Size Red Dot Sight. The ROMEO6 family of red dot sights are the most advanced in their category. The ROMEO6 features our innovative quad reticle system that lets you choose from a dot, circle dot, dot with holds, or circle dot with holds. The ROMEO6 features a bright and ultra low parallax red dot allowing greater situational awareness to shoot with both eyes open. Your ROMEO6 features MOTAC which will extend your runtime beyond 50,000 hours of normal use. The ROMEO6T features a solar cell along with 2 super capacitors. This allows for up to 9 hours of battery free runtime on a full charge. The sight also uses a battery for a backup. Runtimes approaching 100,000 hours under normal inside/outside use. The ROMEO6 Full Size Red Dot Sight includes a mount, lens covers, adjustment tool, battery, and operating instructions. The ROMEO6 is covered by SIG SAUER Electro-Optics Infinite Guarantee and SIG SAUER Electronic & Tritium Component Limited 5-Year Warranty. 3

4 CONTENTS: ROMEO6 1x30mm Full Size Red Dot Sight CR2032 Battery with Solar Cell (1) See through flip backs (see-through or solid depending on model) Lens Cloth Torx and Battery Removal Tool Thread-In Kill Flash (ROMEO6T only) 1/2 Hex Bolt Mount 4

5 sigsauer.com KEY FEATURES: High performance coatings for excellent light transmittance and red dot contrast in all situations unlimited eye relief and ultra-low parallax quad reticle. Solar powered operation with 2 supercapacitors extends already great battery life. MOTAC ( motion activated illumination) powers up when it senses motion and powers down when it does not. Aircraft grade (7075 Series on ROMEO6T) CNC aluminum housing ensures a lifetime of reliable service. Dependable waterproof IP-7 (IP-8 up to 20 meters on ROMEO6T) delivers fogproof performance. Quad Reticle System Users can select from 4 different integrated reticle options (dot, dot with holds, circle dot, circle dot with holds). SIG SAUER Electro-Optics Infinite Guarantee and SIG SAUER Electronic & Tritium Component Limited 5-Year Warranty 5

6 ROMEO6 CONFIGURATIONS CONFIGURATION ROMEO6H ROMEO6T CNC 7075 Billet Aluminum Components CNC 6061 Series Aluminum Components Solar Cell Clear / Standard Notch Filter Coating Red Tint / Mil-Grade Notch Filter Coating IP-7 (1 Meter 10 Minutes) IP-8 Waterproof (20 Meters 1 Hour) Operating Temperature C 6

7 sigsauer.com CONFIGURATION ROMEO6H ROMEO6T Operating Temperature C Stand-alone Thread-in Kill Flash / ARD Thread in See Through Flip Back Lens Covers (Front and Back) Non See-Through Objective Flip-Back Torx Tool Color Graphite Black Lens Cloth Instruction Manual 7

8 PRODUCT IDENTIFICATION ROMEO6 A (+) Illumination Control Turn ON/OFF or Increase Brightness B (-) Illumination Control Turn ON/OFF or Decrease Brightness C CR2032 Coin Cell Battery Tray A B C 8

9 sigsauer.com D Elevation Adjustment E Windage Adjustment D E 9

10 W WARNING Before working on your ROMEO6 sight always ensure that the firearm is unloaded with the safety on. OPERATION ROMEO6 Installing the battery The battery compartment is located on the bottom left side of the sight. Using the supplied torx tool, remove the battery tray by rotating the 2 torx screws in the counter-clockwise (CCW) direction. Remove the tray with the supplied battery removal tool. Insert the CR2032 coin cell battery negative (-) contact facing up; positive (+) contact should be facing down. Reinstall the battery tray by inserting it into the housing. The Tray should snap into place when seated properly. Check to make sure the sight can be turned on and off before reinstalling the 2 Torx screws. Using the provided tool, reinstall the 2 torx screws by rotating them in a clockwise (CW) direction until finger tight. DO NOT exceed 13 in/lbs. 10

11 sigsauer.com Turning Sight On and Off / Illumination Control The Illumination control is located on the left side of the sight. Press and hold either the (+) or (-) button for more than 1 second to turn the sight on. To turn the sight off press and hold either the (+) or (-) button for more than 1 second. To toggle between the different reticle options, press and hold both the (+) and (-) buttons until the reticle changes. The sight features MOTAC and will automatically turn off after 120 seconds of nonuse. As soon as the sight sense motion it will automatically power back on to the current setting. The sight has 12 illumination settings, 10 daylight, 2 NV. 11

12 MOUNTING THE SIGHT ROMEO6 sights have a 1/2 hex bolt 1.53 high mount. This mount is designed to be used with MIL-STD 1913 Picatinny Rails or Weaver style rails. Loosen the hex bolt and place the sight on the rail. Slight the sight forward until the integrated lug contacts the rail you are mounting it on. Tighten the ½ hex bolt to 65 in/lbs. 12

13 sigsauer.com SIGHT ADJUSTMENTS Windage and elevation adjustments are located on the rear top and rear right of the sight. The windage adjustment cap can be used to make adjustments on both the elevation and windage dials. Elevation adjustments the elevation adjustment is on the top of your sight. To raise your point of impact turn the adjustment counter-clockwise (CCW). Each click is equal to 0.5 MOA. To lower the point of impact turn the adjustment clockwise (CW). Windage Adjustments the windage adjustment is on the right side of your sight. To shift your point of impact to the right, turn the adjustment CCW. Each click is equal to 0.5 MOA. To shift the point of impact to the left turn the adjustment CW. Windage Elevation Elevation Adjustment POI Up C Y POI Down D Z Windage Adjustment POI Right A Y POI Left B Z 13

14 MAINTENANCE Cleaning Keep your lenses clear by using a soft cloth or lens pen. The best way to maintain image quality is by keeping your lenses clear of dirt and dust that cause scratches. Always use your flip backs to ensure that the sight optics remain scratch free. TROUBLESHOOTING POI changes between groups Check that the mount is affixed tightly to the rail Check/Clean your firearm Check for variations in ammunition 14

15 sigsauer.com ROMEO6 SPECIFICATIONS Dot Size Magnification Clear Aperture Illumination Settings Elevation Adjustment Range Windage Adjustment Range Weight 2 MOA / 1 MOA 1x 30 mm 10 Day / 2NV 120 MOA 120 MOA 10.4 oz / 295 g 15

16 A B C A 5.25 in / 133 mm B 1.75 in / 46 mm C 2.75 in / 70 mm 16

17 sigsauer.com NOTES: 17

18 I N F S I N I I G T E S G A U U A R E A R N E T E SIG SAUER Electro-Optics Infinite Guarantee SIG SAUER has manufactured the most rugged, dependable high-performance firearms for over two centuries. Our heritage of design, engineering and precision-manufactured quality predates the existence of any other optics company worldwide. We understand the importance of quality in the line of fire, at the shooting range or on your next hunt. SIG SAUER Electro-Optics had to earn the right to wear that badge and the Infinite Guarantee has your back, forever. Period. We will repair or replace your SIG SAUER product in the event it becomes damaged or defective, at no charge to you. If we cannot repair your product, we will replace it with a product in perfect working order of equal or better physical condition. It doesn t matter how it happened, whose fault it was, or where you purchased it. SIG SAUER Infinite Guarantee Unlimited Lifetime Guarantee Fully Transferable No Warranty Card Required No Receipt Required No Time Limit Applies No Charge 18

19 sigsauer.com If you ever have a problem, no matter the cause, we promise to take care of you when it counts. Please note that our Infinite Guarantee does not provide coverage for intentional damage, misuse, cosmetic damage that does not affect the performance of the optic, loss, theft or unauthorized repair or modification. Excludes electronic components. SIG SAUER Electronic & Tritium Component Limited 5-Year Warranty For components not included under the SIG SAUER Infinite Guarantee, this warranty covers any defects in materials and workmanship in the electronic and Tritium components of illuminated riflescopes/sights, pistol sights, electronic sights, flashlights, lasers, binoculars, spotting scopes, and rangefinders. This warranty lasts for five years from the date of manufacture. If, during that five-year period, these products are found to have electronic or Tritium component defects in materials or workmanship, SIG SAUER will repair your product, at no charge to you. If we cannot repair your product, we will replace it with a product in perfect working order of equal or better physical condition. L I M E L E C T R O N I T E D 5 I C & Y E A R T R I T I U M W A R R A N T Y 19

20 FOR PRODUCT SERVICE ON THIS MODEL, PLEASE CALL SW 95th Avenue, Portland, OR USA P/N R00 sigsauer.com