Capacitance range: mf to 25 mf Rated voltages: mf 250 VDC 400 VDC 630 VDC 1000 VDC 1600 VDC 2000 VDC 3000 VDC

Size: px
Start display at page:

Download "Capacitance range: mf to 25 mf Rated voltages: mf 250 VDC 400 VDC 630 VDC 1000 VDC 1600 VDC 2000 VDC 3000 VDC"

Transcription

1 WIMA Snubber MKP Snubber MKP Capacitors for Pulse Applications with ouble-sided Metallized Electrodes, Schoopage Contacts and Internal Series Connection Special Features Pulse duty construction Self-healing Particularly reliable contactconfigurations: 4-pin versions and screwable plate connections Internal series connection from 400 VAC Very low dissipation factor Negative capacitance change versus temperature According to RoHS 011/6/EU Typical Applications For high pulse and high frequency applications requiring extremely reliable contacts e.g. IGBT-applications Construction ielectric: Polypropylene (PP) film Capacitor electrodes: ouble-sided metallized plastic film Internal construction: SnubberMKP: 180 VAC, 0 VAC Plastic film Electrode carrier plastic film metallized on both sides Metal contact layer (schoopage) Terminating plate Snubber MKP: 400 VAC to700 VAC Plastic film Electrode carrier plastic film metallized on both sides Plastic film metallized on one side Metal contact layer (schoopage) Terminating plate Encapsulation: Solvent-resistant, flame-retardant plastic case with epoxy resin seal, UL 94 V-0 Terminations: Tinned wire or plates. Marking: Colour: Red. Marking: Black. Epoxy resin seal: Red Electrical ata Capacitance range: mf to mf Rated voltages: 0 VC, 400 VC, 630 VC, 1000 VC, 1600 VC, 000 VC, 3000 VC Capacitance tolerances: ±0%, ±10%, ±% (other tolerances are available subject to special enquiry) Operating temperature range: ) C to +100) C Insulation resistance at +0+ C: C T 0.33 mf: 1 x 10 M (mean value: x 10 M ) C 0.33 mf: sec (M x mf) (mean value: sec) Measuring voltage: 100 V/1 min. Test voltage: sec L 000 VC 3000 VC U r 1. U r U r 1. U r 6 1. U r 1. U r issipation factors at + 0) C: tan d at f C 0.1 mf 0.1 mf < C T 1.0 mf C > 1.0 mf 1 khz 3 x x x khz 4 x x khz 1 x 10-4 Maximum pulse rise time: Capacitance max. pulse rise time V/msec at T A < 40) C mf 0 VC 400 VC 630 VC 1000 VC 1600 VC 000 VC 3000 VC for pulses equal to the rated voltage Mounting Recommendation Excessive mechanical strain, e.g. pressure or shock onto the capacitor body, is to be avoided during mounting and usage of the capacitors. When fixing the plates the screw torque is to be limited to max. Nm. For further details and graphs please refer to Technical Information. Climatic test category: /100/6 in accordance with IEC Voltage derating: A voltage derating factor of 1.3 % per K must be applied from +8+ C for C voltages and from +7+ C for AC voltages Reliability: Operational life hours Failure rate 1 fit (0. x U r and 40) C) Specific dissipation: Box size* Specific dissipation in Watts per K W x H x L in mm above the ambient temperature 19 x 31 x x 34 x x 37. x x 48 x x 4 x * other box sizes see page 11. Packing Packing units at the end of the catalogue. Packing quantities may vary depending on the plate version. 98

2 WIMA Snubber MKP Continuation General ata Capac- 0 VC/180 VAC* 400 VC/0 VAC* 630 VC/400 VAC* itance W H L Part number W H L Part number W H L Part number 0.1 mf SNMPG SNMPJ SNMPG03104F SNMPJ0310F SNMPF SNMPG SNMPJ030G SNMPF033304F SNMPG03330F SNMPJ03330I SNMPF SNMPG03470G SNMPJ034706B SNMPF03680F SNMPG036806B SNMPJ036806F SNMPJ036807C 1.0 mf SNMPF04100I SNMPG SNMPJ041006G SNMPG041007C SNMPJ SNMPF SNMPG04106G SNMPJ04107F SNMPF04107B SNMPG SNMPF04006F SNMPG04007E SNMPJ04007G SNMPF04007C SNMPF0406F SNMPG0407E SNMPJ0407G SNMPF0407C SNMPF0406G SNMPG0407F SNMPJ0407H SNMPF SNMPF043006I SNMPG043007G SNMPJ043007H SNMPF SNMPF043306I SNMPG043307G SNMPJ043307H SNMPF SNMPF044007F SNMPG044007H SNMPJ044007I SNMPF044707F SNMPG044707H SNMPJ044707I SNMPF04007G SNMPG04007H SNMPJ04007I SNMPF046007G SNMPG046007I SNMPJ046007J SNMPJ046008J SNMPJ046807K SNMPF047007H SNMPG047007I SNMPJ047008J SNMPF048007H SNMPG048008J SNMPJ048008L 10.0 mf SNMPF01007I SNMPG01007J SNMPG01008J SNMPF0107J SNMPG0107K SNMPF0108J SNMPG0108L SNMPF0008L SNMPF008L * AC voltage: f T 1000 Hz; 1.4 x U rms + UC T U r ims in mm. Ionisation inception level in isolated cases may be lower than admissible rated AC voltage. Versions and dimensional drawings see page 10. Part number completion: Version codes see page 108. Tolerance: 0 % = M 10 % = K % = J Packing: bulk = S Pin length: 6- = S none = 00 (for plate versions) Rights reserved to amend design data without prior notification. Continuation page

3 WIMA WIMA Snubber FKP MKP 4 Continuation General ata Capacitance 1000 VC/600 VAC* 1600 VC/60 VAC* W H L Part number W H L Part number mf SNMPO SNMPT0680G 0.1 mf SNMPO13100F SNMPT03100I SNMPO1310I SNMPT SNMPT03107B SNMPO1306B SNMPT0306F SNMPT0307C SNMPO133306F SNMPT033306I SNMPO133307C SNMPT SNMPO134706G SNMPT034707F SNMPO SNMPO136807E SNMPT036807G 1.0 mf SNMPO141007G SNMPT041007H SNMPO141008E SNMPO14107H SNMPT04107I SNMPO14108E SNMPO14007I SNMPT04007K SNMPO14008H SNMPT04008J SNMPO1407I SNMPT0407K SNMPO1408H SNMPT0408J SNMPO1407J SNMPT0408L SNMPO1408J SNMPO143007K SNMPT043008L SNMPO143008J SNMPO143307K SNMPO143308J SNMPO144008L SNMPO144708L SNMPO14008L * AC voltage: f T 1000 Hz; 1.4 x U rms + UC T U r ims. in mm. Ionisation inception level in isolated cases may be lower than admissible rated AC voltage. Versions and dimensional drawings see page 10. Part number completion: Version codes see page 108. Tolerance: 0 % = M 10 % = K % = J Packing: bulk = S Pin length: 6- = S none = 00 (for plate versions) Rights reserved to amend design data without prior notification. Continuation page

4 WIMA Snubber MKP Continuation General ata Capacitance 000 VC/700 VAC* 3000 VC/700 VAC* W H L Part number W H L Part number mf SNMPU0470G SNMPW04706B SNMPU0680I SNMPW SNMPW06807B 0.1 mf SNMPU SNMPW031006F SNMPU031007B SNMPW031007C SNMPU03106F SNMPW SNMPU03107C SNMPU0306I SNMPW0307F SNMPU SNMPU033307F SNMPW033307H SNMPW SNMPU034707G SNMPW034707I SNMPU036807H SNMPW034708H SNMPW036807J SNMPW036808J 1.0 mf SNMPU041007J SNMPW041007K SNMPU041008J SNMPW041008J SNMPU04107K SNMPW04108L SNMPU04108J SNMPU04008L * AC voltage: f T 1000 Hz; 1.4 x U rms + UC T U r ims. in mm. Ionisation inception level in isolated cases may be lower than admissible rated AC voltage. Versions and dimensional drawings see page 10. Part number completion: Version codes see page 108. Tolerance: 0 % = M 10 % = K % = J Packing: bulk = S Pin length: 6- = S none = 00 (for plate versions) Rights reserved to amend design data without prior notification. Permissible AC voltage in relation to frequency at 10) C internal temperature rise (general guide). Urms V µf 6.0 µf 10 µf 0 µf µf 1.0 µf.0 µf 4.0 µf 8.0 µf 1 µf 0. µf 0.47 µf 0.1 µf 0 VC Urms V VC 1.0 µf.0 µf 4.0 µf.0 µf 6.0 µf 8.0 µf 0. µf 3.0 µf 1. µf 0.47 µf 0.1 µf 60 Urms V VC 1.0 µf.0 µf µf 0. µf 3.0 µf 0.47 µf 1. µf 0.1 µf 101 Urms V f Hz 8.0 µf 1 µf 4.0 µf 1.0 µf 0. µf 6.0 µf 10 µf.0 µf 0.47 µf 0.1 µf 400 VC Urms V f 106 Hz VC.0 µf 4.0 µf 0.47 µf 0.1 µf 1.0 µf 3.0 µf.0 µf 0. µf µf f 106 Hz 700 Urms V VC 3000 VC 1.0 µf µf 0. µf.0 µf 0.47 µf 0.1 µf f 106 Hz f 106 Hz f Hz 101

5 Versions of WIMA Snubber Capacitors 10

6 Versions of WIMA Snubber Capacitors 106

7 Versions of WIMA Snubber Capacitors * * Processing notification: Processing should be done within 3 month after manufacturing. tab tab pin pin ims. in mm. pin pin pin Additional special versions can be realized. Please contact us with your specific needs. 107

8 Versions of WIMA Snubber Capacitors W x H x L Version code Size code 7 x 14 x x 1 x 18 4F 7 x 16. x x 18. x 6. F 10. x 19 x 6. G 10. x 0. x 6. H 11 x 1 x 6. I 11 x 1 x 31. 6B 13 x 4 x x 6 x 31. 6F 17 x 9 x 31. 6G 17 x 34. x 31. 6I 11 x x 41. 7B 13 x 4 x 41. 7C 1 x 6 x x 9 x 41. 7E 19 x 3 x 41. 7F 0 x 39. x 41. 7G 4 x 4. x 41. 7H 31 x 46 x 41. 7I 3 x 0 x 41. 7J 40 x x 41. 7K 19 x 31 x x 34 x 6 8E 7 x 37. x 6 8H 33 x 48 x 6 8J 37 x 4 x 6 8L 4 B* B8* 1A 1B 1F 1G 1H 1I 1J 1K 1L A B C E F H I J K L M 3A 3C 3 3E 3G 3I 3J 3K 3L 3N 3O 3P -pin 4-pin B B8 A1 A1.1.1 A1.4 A1.4.1 A1. A1.6 A1.6.1 A1.7 A1.7.1 A A.1 A. A.3 A.4 A.4.1 A. A.6 A.6.1 A.6. A.7 A.8 A3 A3.1 A3. A3.3 A3. A3.6 A3.7 A3.8 A3.8.1 A3.9 A3.10 A3.11 W x H x L Version code Size code Possible connecting respective plate versions - depending on box size. * Processing notification: Processing should be done within 3 month after manufacturing. 11 x 1 x 6. I 11 x 1 x 31. 6B 13 x 4 x x 6 x 31. 6F 17 x 9 x 31. 6G 17 x 34. x 31. 6I 11 x x 41. 7B 13 x 4 x 41. 7C 1 x 6 x x 9 x 41. 7E 19 x 3 x 41. 7F 0 x 39. x 41. 7G 4 x 4. x 41. 7H 31 x 46 x 41. 7I 19 x 31 x x 34 x 6 8E 7 x 37. x 6 8H 33 x 48 x 6 8J 37 x 4 x 6 8L 4A 4C 4J 4L 4M A 6A FS A4 A4. A4.7 A4.9 A4.10 A A6 FS

9 Recommendation for Processing and Application of Through-Hole Capacitors Soldering Process Internal temperature of the capacitor must be kept as follows: Polyester: preheating: T max. T 1 C soldering: T max. T 13 C Polypropylene: preheating: T max. T 100 C soldering: T max. T 110 C Single wave soldering Soldering bath temperature: T P 60 C well time: t P sec ouble wave soldering Soldering bath temperature: T P 60 C well time: St P sec ue to different soldering processes and heat requirements the graphs are to be regarded as a recommendation only. WIMA Quality and Environmental Philosophy ISO 9001:008 Certification ISO 9001:008 is an international basic standard of quality assurance systems for all branches of industry. The approval according to ISO 9001:008 of our factories by the VE inspectorate certifies that organisation, equipment and monitoring of quality assurance in our factories correspond to internationally recognized standards. WIMA WPCS The WIMA Process Control System (WPCS) is a quality surveillance and optimization system developed by WIMA. WPCS is a major part of the quality-oriented WIMA production. Points of application of WPCS during production process: incoming material inspection metallization film inspection schoopage pre-healing pin attachment cast resin preparation/ encapsulation 100% final inspection Testing as per customer requirements WIMA Environmental Policy All WIMA capacitors, irrespective of whether through-hole devices or SM, are made of environmentally friendly materials. Neither during manufacture nor in the product itself any toxic substances are used, e.g. Lead PBB/PBE PCB Arsenic CFC Cadmium Hydrocarbon chloride Mercury Chromium 6+ etc. We merely use pure, recyclable materials for packing our components, such as: carton cardboard adhesive tape made of paper polystyrene We almost completely refrain from using packing materials such as: foamed polystyrene (Styropor ) adhesive tapes made of plastic metal clips RoHS Compliance According to the RoHS irective 011/6/EU certain hazardous substances like e.g. lead, cadmium, mercury must not be used any longer in electronic equipment as of July 1st, 006. For the sake of the environment WIMA has refraind from using such substances since years already. WIMA Kondensatoren sind bleifrei konform RoHS 011/6/EU WIMA capacitors are lead free in accordance with RoHS 011/6/EU Tape for lead-free WIMA capacitors IN EN ISO 14001:004 WIMA s environmental management has been established in accordance with the guidelines of IN EN ISO 14001:004 to optimize the production processes with regard to energy and resources. 1

10 P P P 1 H1 P 1 H t Typical imensions for Taping Configuration P P Vh H1 P 1 W H W0 W1 iagram 1: PCM.//7.mm W 0 F d P 0 d d F P 0 P F P P 0 iagram : PCM10/1mm iagram 3:PCM. and 7.*mm *PCM 7. taping possible withtwo feed holesbetween components imensions for Radial Taping esignation Symbol PCM. taping PCM taping PCM 7. taping PCM 10 taping* PCM 1 taping* PCM. taping PCM 7. taping Carrier tape width W 18.0 p p p p p p p0. Hold-down tape width W for hot-sealing 6.0 for hot-sealing 1.0 for hot-sealing 1.0 for hot-sealing 1.0 for hot-sealing 1.0 for hot-sealing for hot-sealing 1.0 adhesive tape adhesive tape adhesive tape adhesive tape adhesive tape adhesive tape adhesive tape Hole position W p p p p p p p0. Hold-down tape position W 0. to 3.0 max. 0. to 3.0 max. 0. to 3.0 max. 0. to 3.0 max. 0. to 3.0 max. 0. to 3.0 max. 0. to 3.0 max. Feed hole diameter p p p p p p p0. Pitch of component P 1.7 p p p1.0.4 p1.0.4 p p1. 3 * 8.1 p1. or 0.8 p1. cumulative pitch cumulative pitch cumulative pitch cumulative pitch cumulative pitch cumulative pitch cumulative pitch Feed hole pitch P p0.3 error max. 1.7 p0.3 error max. 1.7 p0.3 error max. 1.7 p0.3 error max. 1.7 p0.3 error max. 1.7 p0.3 error max. 1.7 p0.3 error max. 1.0 mm/0 pitch 1.0 mm/0 pitch 1.0 mm/0 pitch 1.0 mm/0 pitch 1.0 mm/0 pitch 1.0 mm/0 pitch 1.0 mm/0 pitch Feed hole centre to pin Hole centre to component centre P 1.1 p p0.7.6 p p0.7. p p0.7.3 p0.7 P 6.3 p p p p p p p1.3 Feed hole centre to bottom 16. p p p p p p p0. H edge of the component 18. p p p p p p p0. Feed hole centre to top H+H H component < H 1 H+H component < H 1 H+H component < H 1 H+H component < H 1 H+H component < H 1 H+H component < H 1 H+H component < H 1 edge of the component 1 3. max. 3. max. 4. to to to to to 4.0 Pin spacing at F. p p p0.8 1 p0.8. p p0.8 upper edge of carrier tape 0. Pin diameter d 0.4 p p p0.0 or ,06 +0,08 +0, p0.0 or Component alignment h p.0 max. p.0 max. p 3.0 max. p 3.0 max. p 3.0 max. p 3.0 max. p 3.0 max. Total tape thickness t 0.7 p p p p p p p0. Package (see also page 141) ROLL/AMMO Unit see details page 14. ims in mm. iameter of pins see General ata. REEL P 360 max. p depending on P 30 p1 B 8 p comp. dimensions * PCM 10 and PCM 1 can be crimped to PCM 7.. Position of components according to PCM 7. (sketch 1). P 0 = 1.7 or 1.0 is possible REEL P 360 max. B P 30 p1 AMMO p 4 p depending P 00 max. 8 p or REEL B 60 p on PCM and P p1 66 p 68 p component dimensions Please clarify customer-specific deviations with the manufacturer. 140

11 Types of Tape Packaging of Capacitors for Automatic Radial Insertion ROLL Packaging AMMO Packaging REEL Packaging 340 max. 370 max. 30± 1 ± max. 00 max. 0 max. 70 max. 340 max. 490 max. BAR COE (Labelling) Labelling of package units in plain text and with alphanumerical Bar Code Scanner decoding of WIMA supplier number Customer s P/O number Customer s part number WIMA confirmation number WIMA part number Lot number ate code Quantity In addition part description of article capacitance value rated voltage dimensions capacitance tolerance packing as well as gross weight and customer s name are indicated in plain text. BARCOE Code max. 340 max. 0 max. B 141

12 Packing Quantities for Capacitors with Radial Pins in PCM. mm to. mm PCM. mm mm 7. mm 10 mm 1 mm. mm pcs. per packing unit Size ROLL REEL AMMO bulk P 360 P x x 370 H16. H18. H16. H18. H16. H18. H16. H18. H16. H18. W H L Codes S N O F I H J A C B B C E F A B C E F G H I J K L M N A B C E F G A FA C FB F G H I B FC C F FE F FF H J FG M A B FH F FI 40* G 680* H 680* I 680* FJ 40* * TPS (Tray-Packing-System). Plate versions may have different packing units. Moulded versions. Rights reserved to amend design data without prior notification. Samples and pre-production needs on request. 14

13 Packing Quantities for Capacitors with Radial Pins in PCM 7. mm to. mm PCM 7. mm 37. mm 48. mm. mm pcs. per packing unit Size ROLL REEL AMMO bulk P 360 P x x 370 H16. H18. H16. H18. H16. H18. H16. H18. H16. H18. W H L Codes S N O F I H J A C B A 640* 460/340* B 44* 380/80* * FK 336* F 384* FL 88* G 176* I 176* FM 16* J 144* A 480* B 408* C * * E 13* F 108* G 108* H 84* M 100* I 7* J 3* K 8* * E 7* H 60* J 48* L * F * 4 7 9H 0* J 0* * for -inch transport pitches. Moulded versions. Rights reserved to amend design data without prior notification. * TPS (Tray-Packing-System). Plate versions may have different packing units. Samples and pre-production needs on request. 143

14 WIMA Part Number System A WIMA part number consists of 18 digits and is composed as follows: Field 1-4: Type description Field - 6: Rated voltage Field 7-10: Capacitance Field 11-1: Size and PCM Field 13-14: Version code (e.g. Snubber versions) Field 1: Capacitance tolerance Field 16: Packing Field 17-18: Pin length (untaped) M K S C A 0 0 M S S MKS 63 VC 0.01 mf. x 6. x % bulk 6 - Type description: Rated voltage: Capacitance: Size: Tolerance: SM-PET = SMT 0 VC = B0 pf = x 3.3 x 3 Size 181 = KA ±0 % = M SM-PEN = SMN 63 VC = C0 47 pf = x 3.3 x 4 Size 181 = KB ±10 % = K SM-PPS = SMI 100 VC = pf = x.1 x 3. Size 0 = QA ± % = J FKP 0 = FKP0 0 VC = F0 10 pf = x.1 x 4. Size 0 = QB ±. % = H MKS 0 = MKS0 400 VC = G0 0 pf = x 6.1 x 3 Size 84 = TA ±1 % = E FKS = FKS 40 VC = H0 330 pf = x 6.1 x Size 84 = TB... FKP = FKP 600 VC = I0 470 pf = x 7.6 x Size 4030 = VA MKS = MKS 630 VC = J0 680 pf = x 10. x 6 Size 040 = XA MKP = MKP 700 VC = K pf = x 13.7 x 7 Size 604 = YA Packing: FKS 3 = FKS3 800 VC = L0 100 pf = 110. x 7 x 4.6 PCM. = 0B AMMO H x 340 = A FKP 3 = FKP3 80 VC = M0 00 pf = 10 3 x 7. x 4.6 PCM. = 0C AMMO H x 370 = B MKS 4 = MKS4 900 VC = N pf = x 6. x 7. PCM = 1A AMMO H x 340 = C MKP 4 = MKP VC = O pf = x 7. x 7. PCM = 1B AMMO H x 370 = MKP 10 = MKP VC = P pf = x 7 x 10 PCM 7. = A REEL H = F FKP 4 = FKP4 100 VC = Q mf = x 8. x 10 PCM 7. = B REEL H = H FKP 1 = FKP1 10 VC = R0 0.0 mf = 0 3 x 9 x 13 PCM 10 = 3A REEL H = I MKP-X = MKX 100 VC = S mf = x 9 x 13 PCM 10 = 3C REEL H = J MKP-X R = MKXR 1600 VC = T0 0.1 mf = 3100 x 11 x 18 PCM 1 = 4B ROLL H16. = N MKP-X1 R = MKX1 000 VC = U0 0. mf = 30 6 x 1. x 18 PCM 1 = 4C ROLL H18. = O MKP-Y = MKY 00 VC = V mf = 3470 x 14 x 6. PCM. = A BLISTER W1 180 = P MP 3-X = MPX 3000 VC = W0 1 mf = x 1 x 6. PCM. = B BLISTER W1 330 = Q MP 3-X1 = MPX VC = X0. mf = 40 9 x 19 x 31. PCM 7. = 6A BLISTER W = R MP 3-Y = MPY 6000 VC = Y0 4.7 mf = x1 x 31. PCM 7. = 6B BLISTER W4 330 = T MP 3R-Y = MPRY 0 VAC = 0W 10 mf = x 19 x 41. PCM 37. = 7A Bulk/TPS Standard = S Snubber MKP = SNMP 7 VAC = 1W mf = 0 11 x x 41. PCM 37. = 7B... Snubber FKP = SNFP 300 VAC = W 47 mf = x 31 x 6 PCM 48. = 8 GTO MKP = GTOM 30 VAC = AW 100 mf = x 0 x 7 PCM. = 9F C-LINK MKP 3 = CP3 400 VAC = 3W 0 mf = C-LINK MKP 4 = CP4 440 VAC = 4W 1000 mf = 7100 C-LINK MKP 4S = CPS 00 VAC = W 100 mf = 710 C-LINK MKP = CP Version code: C-LINK MKP 6 = CP6 Standard = 00 Pin length (untaped) C-LINK HC = CHC Version A1 = 1A 3. ±0. = C9 Version A1.1.1 = 1B 6 - = S Version A = A 16 ±1 = P The data on this page is not complete and serves only to explain the part number system. Part number information is listed on the pages of the respective WIMA range. 138

Capacitance range: 0.01 mf to 2.2 mf Rated voltages: 630 VDC 1000 VDC 1600 VDC 2000 VDC 3000 VDC 4000 VDC

Capacitance range: 0.01 mf to 2.2 mf Rated voltages: 630 VDC 1000 VDC 1600 VDC 2000 VDC 3000 VDC 4000 VDC WIMA Snubber FKP Snubber FKP Capacitors for High Pulse Applications with Metal Foil Electrodes, Schoopage Contacts and Self-Healing Internal Series Connection Special Features High pulse duty Self-healing

More information

Reference frequency 1 khz in accordance with IEC Maximum pulse rise time: Mechanical Tests

Reference frequency 1 khz in accordance with IEC Maximum pulse rise time: Mechanical Tests Factor WIMA MKP 4C NEW Compact Type: Metallized Polypropylene (PP)- Capacitors in PCM 0 mm to. mm. Capacitances from 0.068 mf to. mf. Rated Voltages from 40 VC to 630 VC. Special Features Very compact

More information

Capacitance range: 0.01 mf to 2.2 mf Rated voltages: 630 VDC 1000 VDC 1600 VDC 2000 VDC 3000 VDC 4000 VDC

Capacitance range: 0.01 mf to 2.2 mf Rated voltages: 630 VDC 1000 VDC 1600 VDC 2000 VDC 3000 VDC 4000 VDC WIMA Snubber FKP Snubber FKP Capacitors for High Pulse Applications with Metal Foil Electrodes, Schoopage Contacts and Self-Healing Internal Series Connection Special Features High pulse duty Self-healing

More information

at f C 20 mf 20 mf < C T 50 mf C > 50 mf 1 khz 3 x x x 10-4 Mounting Recommendation

at f C 20 mf 20 mf < C T 50 mf C > 50 mf 1 khz 3 x x x 10-4 Mounting Recommendation GTO MKP Capacitors for Pulse Applications with Internal Series Connection Special Features Pulse duty construction Self-healing Cylindrical capacitor body with axial screw and thread connections size M6

More information

Capacitance range: 100 pf to 0.22 mf (E12-values on request) Rated voltages:

Capacitance range: 100 pf to 0.22 mf (E12-values on request) Rated voltages: WIMA FKP 1 Polypropylene (PP) Capacitors for Pulse Applications with Metal Foil Electrodes, Schoopage Contacts, ouble-sided Metallization and Self-Healing Internal Series Connection for Highest Current

More information

Capacitance range: 100 pf to 4.7 mf (E12-values on request) Rated voltages:

Capacitance range: 100 pf to 4.7 mf (E12-values on request) Rated voltages: WIMA FKP 1 Polypropylene (PP) Capacitors for Pulse Applications with Metal Foil Electrodes and Metallized Internal Series Connection in PCM 1 mm to. mm. Capacitances from 100 pf to 4.7 mf. Rated Voltages

More information

Dip Solder Test/Processing

Dip Solder Test/Processing IMA SM-PEN Metallize Polyethylene-Naphthalate (PEN) SM Film Capacitors with Box Encapsulation. Capacitances from 0.01 mf to 1.0 mf. Rate Voltages from 63 VC to 400 VC. Size Coes from 1812 to 2824. Special

More information

Metallized Polypropylene Film Capacitor Related Document: IEC

Metallized Polypropylene Film Capacitor Related Document: IEC MKP 184 Metallized Polypropylene Film Capacitor Related Document: IEC 6084-16 MAIN APPLICATIONS: High voltage, high current and high pulse operations, deflection circuits in TV sets (S-correction and fly-back

More information

WIMA SuperCap C. Double-Layer Capacitors in Cylindrical Metal Case with very High Capacitances in the Farad Range. Typical Applications

WIMA SuperCap C. Double-Layer Capacitors in Cylindrical Metal Case with very High Capacitances in the Farad Range. Typical Applications WIMA SuperCap C ouble-layer Capacitors in Cylindrical Metal Case with very High Capacitances in the Farad Range Special Features Storage capacitors with very high capacitance values of 110 F and 200 F

More information

Metallized Polypropylene Film Capacitor Related Document: IEC

Metallized Polypropylene Film Capacitor Related Document: IEC Related Document: IEC 6084-16 MKP 184 Dimensions in millimeters 40.0 ±.0 L 40.0 ±.0 Max. MAIN APPLICATIONS High voltage, high current and high pulse operations, deflection circuits in TV sets (S-correction

More information

MADE IN GERMANY Film Capacitors for Electronic Equipment

MADE IN GERMANY Film Capacitors for Electronic Equipment http://www.wima.com MAE IN GERMANY Film Capacitors for Electronic Equipment Edition 016 Content SM Plastic Film Capacitors Size Codes 181 to 604 Subminiature Capacitors PCM. mm Film/Foil Capacitors PCM

More information

Metallized Polypropylene Film Capacitor Related Document: IEC

Metallized Polypropylene Film Capacitor Related Document: IEC Metallized Polypropylene Film Capacitor Related Document: IEC 6084-6 MKP 84 L Max. Dimensions in millimeters W Max. Marking FEATURES Product is completely lead (Pb)-free Product is RoHS-compliant 0.6 pcm

More information

U 250 VDC 100 V 1 x 10 4 M 3000 sec (M x mf)

U 250 VDC 100 V 1 x 10 4 M 3000 sec (M x mf) IMA SM-PET Metallize Polyester (PET) SM Film Capacitors with Box Encapsulation. Capacitances from 0.01 mf to 6.8 mf. Rate Voltages from 63 VC to 1000 VC. Size Coes from 1812 to 6054. Special Features Size

More information

Double Metallized Polypropylene Film Capacitor Radial AC and Pulse Capacitor

Double Metallized Polypropylene Film Capacitor Radial AC and Pulse Capacitor End of Life September 018 - Alternative Device: MMKP8 Double Metallized Polypropylene Film Capacitor Radial AC and Pulse Capacitor FEATURES Material categorization: for definitions of compliance please

More information

AC and Pulse Film/Foil Capacitors Radial Potted Type

AC and Pulse Film/Foil Capacitors Radial Potted Type KP186 AC and Pulse Film/Foil Capacitors Radial Potted Type FEATURES Material categorization: For definitions of compliance please see www.vishay.com/doc?9991 APPLICATIONS High voltage, very high current

More information

1 x 10 4 M U 250 VDC 100 V. Dip Solder Test/Processing

1 x 10 4 M U 250 VDC 100 V. Dip Solder Test/Processing IMA SM-PET Metallize Polyester (PET) SM Film Capacitors with Box Encapsulation Special Features Size coes 1812, 2220, 2824, 4030, 5040 an 6054 with PET an encapsulate Operating temperature up to 100 C

More information

Capacitors. Typical electrical characteristics of metallized polyester capacitors KEU. Type KEU Metallized polyester capacitors

Capacitors. Typical electrical characteristics of metallized polyester capacitors KEU. Type KEU Metallized polyester capacitors Capacitors Type KEU Metallized polyester capacitors As a dielectric high quality polyester film with good electrical properties is used. Electrodes of capacitor are vacuum metallized aluminium. The thickness

More information

1 x 10 4 M (mean value: 5 x 10 4 M ) Measuring time: 1 min. Dissipation factors at +20) C: tan d U 250 VDC 100 V

1 x 10 4 M (mean value: 5 x 10 4 M ) Measuring time: 1 min. Dissipation factors at +20) C: tan d U 250 VDC 100 V IMA SM-PEN Metallize Polyethylene-Naphthalate (PEN) SM Film Capacitors with Box Encapsulation Special Features Size coes 1812, 2220, 2824, 4030, 5040 an 6054 with PEN an encapsulate Operating temperature

More information

R.46. X2 CLASS (IEC ) - MKP Series SELF-HEALING PROPERTIES 09/

R.46. X2 CLASS (IEC ) - MKP Series SELF-HEALING PROPERTIES 09/ Loose Taped X CLASS (IEC 60384-4) - MKP Series Typical applications: interference suppression and «across-the-line» applications. Suitable for use in situations where failure of the capacitor would not

More information

Applications. Capacitance Code (pf) First two digits represent significant figures. Third digit specifies number of zeros.

Applications. Capacitance Code (pf) First two digits represent significant figures. Third digit specifies number of zeros. AC Line EMI Suppression and RC Networks P409 Series, Integrated Resistor, Metallized Impregnated Paper, Class X2, 275 VAC Overview Applications The P409 Series is constructed of multilayer metallized paper

More information

Metallized Polyester Film Capacitor Related Document: IEC

Metallized Polyester Film Capacitor Related Document: IEC Metallized Polyester Film Capacitor Related Document: IEC 6084- MKT 8 Dimensions in millimeters Ø d FEATURES Product is completely lead (Pb)-free Product is RoHS compliant 40.0 ±.0 L 40.0 ±.0 Max. d D

More information

Applications. Capacitance Code (pf) First two digits represent significant figures. Third digit specifies number of zeros.

Applications. Capacitance Code (pf) First two digits represent significant figures. Third digit specifies number of zeros. AC Line EMI Suppression and RC Networks P410 Series, Integrated Resistor, Metallized Impregnated Paper, Class X1, 300 VAC Overview Applications The P410 Series is constructed of multilayer metallized paper

More information

Metallized Polyester Film Capacitors (MKT-S)

Metallized Polyester Film Capacitors (MKT-S) Metallized Polyester Film Capacitors (MKT-S) Series/Type: B32538 The following products presented in this data sheet are being withdrawn. Ordering Code Substitute Product Date of Withdrawal Deadline Last

More information

Metallized Polypropylene Capacitor, Mini-Version (-M) Related Document: CECC

Metallized Polypropylene Capacitor, Mini-Version (-M) Related Document: CECC MKP 840.../...-M Metallized Polypropylene Capacitor, Mini-Version (-M) Related Document: CECC 00 0.6 pcm ± 0.4 Dimensions in millimeters MAIN APPLICATIONS High frequency and pulse operations. Deflection

More information

Snubber MMKP 386 AC and pulse double metallized film capacitor

Snubber MMKP 386 AC and pulse double metallized film capacitor Page 1 of 19 VISHAY BCcomponents Snubber MMKP 386 AC and pulse double metallized film capacitor File under TPD sheet 190, HQN-384-17/110 Page 2 of 19 Pb AC and Pulse Double Metallized polypropylene MMKP

More information

Resin-Molded, Radial-Lead Solid Tantalum Capacitors

Resin-Molded, Radial-Lead Solid Tantalum Capacitors Resin-Molded, Radial-Lead Solid Tantalum Capacitors PERFORMANCE CHARACTERISTICS Operating Temperature: - 55 C to +25 C (above 85 C, voltage derating is required) Capacitance Range: 0. μf to 3 μf Capacitance

More information

Resin-Molded, Radial-Lead Solid Tantalum Capacitors

Resin-Molded, Radial-Lead Solid Tantalum Capacitors Resin-Molded, Radial-Lead Solid Tantalum Capacitors PERFORMANCE CHARACTERISTICS Operating Temperature: -55 C to +25 C (above 85 C, voltage derating is required) Capacitance Range: 0. μf to 3 μf Capacitance

More information

Capacitors for Use in Electronics

Capacitors for Use in Electronics Capacitors for Use in Electronics Capacitors 1 Contents General information on Iskra Capacitors for use in electronics Type Construction of capacitors Class Page KFU polyester capacitors (KT) 13 KEU metallized

More information

Characteristics Climatic Category 40/105/56 (IEC 61071)

Characteristics Climatic Category 40/105/56 (IEC 61071) Polypropylene Film Capacitors for Snubber Applications Features - 105 C - Very low dissipation factor - Highest peak pulse capability - Double-sided metallized electrodes - Internal series connection -

More information

AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC

AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC FEATURES Complying with IEC 60384-14 4 th edition Can pass 10 kv pulses (10 per polarity) Withstands 85 / 85 / 1000 h test Reduced

More information

Varistors to

Varistors to FEATURES Zinc oxide disc, epoxy coated Straight leads Straight leads with flange (2322 592 and 593 series only) Kinked leads. APPLICATION Suppression of transients. DESCRIPTION The varistors consist of

More information

Characteristics Climatic Category 40/85/56 (IEC 61071) Operating Temperature. 700 ~ 2000 VDC Capacitance Range 0,2 ~ 7,5 µf Capacitance Tolerance

Characteristics Climatic Category 40/85/56 (IEC 61071) Operating Temperature. 700 ~ 2000 VDC Capacitance Range 0,2 ~ 7,5 µf Capacitance Tolerance Polypropylene Film Capacitors for Snubber Applications Features - Very low dissipation factor - Highest peak pulse capability - Double-sided metallized electrodes - Internal series connection - Metal sprayed

More information

Metallized Polyester PCMT 369 film capacitors

Metallized Polyester PCMT 369 film capacitors MKT RADIAL LACQUERED CAPACITORS (Dipped Type) Pitch 10.0/15.0/22.5/27.5 mm (reduced pitch ; 7.5mm) QUICK REFERENCE DATA Capacitance range (E12 series) Capacitance tolerance Rated voltage V Rdc Climatic

More information

AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type

AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type FEATURES 5 mm to 37.5 mm lead pitch Material categorization: for definitions of compliance please see www.vishay.com/doc?9992

More information

Interference suppression film capacitors MKP 336 1

Interference suppression film capacitors MKP 336 1 MKP RADIAL POTTED TYPE PITCH /15/22.5/27.5 mm l b h lt P d t CBA196 Fig.1 Simplified outlines. FEATURES to 27.5 mm lead pitch Supplied loose in box and taped on reel Consists of a low-inductive wound cell

More information

Plastic Film Capacitors. Metallized Polypropylene Film Capacitor E C W F D E C W F D

Plastic Film Capacitors. Metallized Polypropylene Film Capacitor E C W F D E C W F D Metallized Polypropylene Film Capacitor Type : ECWFD Non-inductive construction using metalized Polypropylene film with flame retardant epoxy resin coating. Features Small size Excellent frequency characteristics

More information

Metallized polyester film capacitors MKT 470

Metallized polyester film capacitors MKT 470 MKT RADIAL POTTED TYPE PITCH 5 mm CBA141 Fig.1 Simplified outlines. FEATURES Low-inductive wound cell of metallized (PETP) film Potted with epoxy resin in a flame-retardant case Radial leads of solder-coated

More information

AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type

AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type FEATURES 7.5 mm to 37.5 mm lead pitch Material categorization: for definitions of compliance please see /doc?99912 APPLICATIONS

More information

Characteristics Climatic Category 40/105/56 (IEC 61071) Operating Temperature. 850 ~ 1200 VDC Capacitance Range 0,33 ~ 3,0 µf Capacitance Tolerance

Characteristics Climatic Category 40/105/56 (IEC 61071) Operating Temperature. 850 ~ 1200 VDC Capacitance Range 0,33 ~ 3,0 µf Capacitance Tolerance Polypropylene Film Capacitors for Snubber Applications Features - 105 C - Very low dissipation factor - High peak pulse capability - Metal sprayed contacts for low ESL - Plates for direct IGBT connection

More information

Characteristics Climatic Category 40/105/56 (IEC 61071)

Characteristics Climatic Category 40/105/56 (IEC 61071) Polypropylene Film Capacitors for Snubber Applications Features - Very low dissipation factor - High peak pulse capability - Plates for direct IGBT connection - Self-healing - 105 C CBB 165 IS Series Applications

More information

Solid Tantalum Chip Capacitors TANTAMOUNT, Low Profile, Conformal Coated, Maximum CV

Solid Tantalum Chip Capacitors TANTAMOUNT, Low Profile, Conformal Coated, Maximum CV Solid Tantalum Chip Capacitors TANTAMOUNT, Low Profile, Conformal Coated, Maximum CV FEATURES New case size offerings. 2mm height Terminations: Tin (2) standard. Low ESR 8mm, 12mm tape and reel packaging

More information

Polystyrene capacitors. ACOA Srl S.S. 24 km 16, ALPIGNANO (Torino) - Italy - Tel Fax

Polystyrene capacitors. ACOA Srl S.S. 24 km 16, ALPIGNANO (Torino) - Italy - Tel Fax Polystyrene capacitors ACOA Srl S.S. 24 km 16,2-10091 ALPIGNANO (Torino) - Italy - Tel. +39.011.9784411 - Fax +39.011.9785250 www.acoa-capacitors.it DIELECTRIC POLYSTYRENE FILM FOIL (KS) Series PLB/1 PLB/3

More information

DATA SHEET. Radial series Leaded ceramic multilayer capacitors. BCE Sud Passive Components Oct 16

DATA SHEET. Radial series Leaded ceramic multilayer capacitors. BCE Sud Passive Components Oct 16 DATA SEET File under BCE Sud Passive Components, 2003 Oct 16 BCE Sud Passive Components A former part of Philips Components FEATURES Very high capacitance per unit volume Low cost. APPLICATIONS These conformally

More information

AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC

AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC FEATURES Complying with IEC 60384-14 4 th edition High reliability Vertical (inline) kinked or straight leads Singlelayer AC

More information

Zinc Oxide Varistors. VE/VF Types for Heavy Duty Applications ( P Series ) FEATURES PARTICULAR CHARACTERISTICS 18 TPC

Zinc Oxide Varistors. VE/VF Types for Heavy Duty Applications ( P Series ) FEATURES PARTICULAR CHARACTERISTICS 18 TPC VE/VF Types for Heavy Duty Applications ( P Series ) FEATURES P Series are especially dedicated to heavy duty applications encountered in the AC power network. Higher surge current and energy ratings provide

More information

Funkentstör-Kondensatoren der Klasse X2

Funkentstör-Kondensatoren der Klasse X2 STÖRSCHUTZ-KONDENSATOREN Funkentstör-Kondensatoren der Klasse X2 TECHNICAL TERMS EXPLANATION Rated capacitance Capacitance referred to 1 khz, 20 +-1ºC, 65+-2% of relative humidity and 96+- 10 kpa. In case

More information

Capacitance Cap. Tol. Suffix construction. Rated voltage 450 VDC

Capacitance Cap. Tol. Suffix construction. Rated voltage 450 VDC Metallized Polypropylene Film Capacitors Type:ECWFD Plastic Film Capacitors Non-inductive construction using metalized Polypropylene film with flame retardant epoxy resin coating. Features Small size Excellent

More information

AC and Pulse PCMP 384 Double Side Metallized Polypropylene film Capacitors

AC and Pulse PCMP 384 Double Side Metallized Polypropylene film Capacitors MMKP RADIAL POTTED CAPACITORS Pitch 10.0/15.0/22.5mm ( reduced pitch 7.5mm) QUICK REFERENCE DATA Capacitance range (E24 series) Capacitance tolerance Rated voltage (DC) Climatic category Rated temperature

More information

Multilayer Ceramic Capacitors Leaded Capacitors. Packaging. Internal coding. Capacitance tolerance

Multilayer Ceramic Capacitors Leaded Capacitors. Packaging. Internal coding. Capacitance tolerance Leaded Capacitors Leaded Ordering code system B37979N 1 100 K 0 54 Packaging 51 ^ cardboard tape, reel packing (360-mm reel) 54 ^ Ammo packing (standard) 00 ^ bulk Internal coding Capacitance tolerance

More information

WCAP-FTXX Film Capacitors

WCAP-FTXX Film Capacitors A Dimensions: [mm] B Recommended hole pattern: [mm] D1 Electrical Properties: Properties Test conditions Value Unit Tol. Capacitance 1 V/ 1 khz ± 0.2 khz C 0.1000 µf ± 10% Rated voltage U R 310 V (AC)

More information

MKP.g. 1.0 Rated Values and Operational Data

MKP.g. 1.0 Rated Values and Operational Data Applications DC and AC voltages Professional Applications Tuned circuits, filters, timers Integrators, S/H Coupling / decoupling, audio Instrumentation Main Characteristics Dry film-foil based technology

More information

DC Film Capacitors MKT Radial Potted Type

DC Film Capacitors MKT Radial Potted Type DC Film Capacitors MKT Radial Potted Type MKT80 FEATURES AEC-Q00 qualified (rev. D) for PCM. mm (for larger available components on request) High temperature capabilities, up to 0 C Capacitance up to 60

More information

GENERAL PURPOSE CAPACITORS

GENERAL PURPOSE CAPACITORS AMERICAN TECHNICAL CERAMICS GENERAL PURPOSE CAPACITORS Low Cost Multilayer Ceramic Capacitors For Surface Mount Applications Manufactured for ATC ISO 9001 REGISTERED COMPANY ATC 001-847, Rev. AA; 5/18

More information

DC Film Capacitors MKT Axial Type

DC Film Capacitors MKT Axial Type MKT181 DC Film Capacitors MKT Axial Type FEATURES Supplied loose in box, taped on ammopack or reel Material categorization: For definitions of compliance please see www.vishay.com/doc?9991 APPLICATIONS

More information

Recommended Land Pattern: [mm]

Recommended Land Pattern: [mm] Dimensions: [mm] Recommended Land Pattern: [mm] Electrical Properties: Properties Test conditions Value Unit Tol. Capacitance 1 V/ 1 khz ± 0.2 khz C 150 nf ±10% Rated Voltage U R 310 V (AC) max. Rated

More information

Axial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 50 V DC, 100 V DC, 200 V DC

Axial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 50 V DC, 100 V DC, 200 V DC Axial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 50 V DC, 100 V DC, 200 V DC FEATURES AEC-Q200 qualified with PPAP available High reliability MLCC insert with

More information

Applications. Capacitance Code (pf)

Applications. Capacitance Code (pf) General Purpose, Pulse and DC Transient Suppression PME261 Metallized Impregnated Paper, 10.2 25.4 mm Lead Spacing, 400 1,000 VDC Overview Applications The PME261 is multilayer metallized paper, encapsulated

More information

CCDSeries FEATURES ORDERING CODE CCD B 101 K H 7 2 (1) (2) (3) (4) (5) (6) (7) (8) (9) Safety Standard Recognized Ceramic Capacitors

CCDSeries FEATURES ORDERING CODE CCD B 101 K H 7 2 (1) (2) (3) (4) (5) (6) (7) (8) (9) Safety Standard Recognized Ceramic Capacitors CCDSeries Configuration FEATURES Complying with IEC60384-14 4 th Edition Class X1Y1 and Class X1Y2 Dielectric Strength: AC2600V (r.m.s) for X1Y2 and AC4000V (r.m.s) for X1Y1 High Releability Coated With

More information

DC Film Capacitors MKT Axial Type

DC Film Capacitors MKT Axial Type MKT 181 Ø d FEATURES Supplied loose in box, taped on ammopack or reel RoHS compliant L 40.0 ±.0 40.0 ±.0 Max. Dimensions in mm D Max. ENCAPSULATION Plastic-wrapped, epoxy resin sealed, flame retardant

More information

TPC Suppressor Capacitors Classes X & Y A KYOCERA GROUP COMPANY

TPC Suppressor Capacitors Classes X & Y A KYOCERA GROUP COMPANY Suppressor Capacitors Classes X & Y A KYOCERA GROUP COMPANY Contents General Technical Information on Interference Suppression..... 2 Ordering Code......................................... 3 QX Series

More information

POE INTERNATIONAL CORPORATION. SPECIFICATION OF MULTI-LAYER RADIAL-LEADED TYPE CAPACITOR Ver: 8 Page: 1

POE INTERNATIONAL CORPORATION. SPECIFICATION OF MULTI-LAYER RADIAL-LEADED TYPE CAPACITOR Ver: 8 Page: 1 SPECIFICATION OF MULTI-LAYER RADIAL-LEADED TYPE CAPACITOR Ver: 8 Page:. Scope: Its specification applies to Radial Series Ceramic Capacitor. 2.How to order: CODE: U RD2 R 02 K T Rated Voltage Code:U =

More information

Applications C4 4 U Q G T F 8 S K. Terminals Code. Capacitance Code (pf)

Applications C4 4 U Q G T F 8 S K. Terminals Code. Capacitance Code (pf) Overview The C44U series is a polypropylene segmented metallized film capacitor with a cylindrical, aluminium can-type design filled with resin. It uses screw terminals and a plastic deck. Applications

More information

Data sheet FIXED CHIP RESISTORS; RECTANGULAR TYPE & WIDE TERMINATION. AEC-Q200 qualified. RoHS COMPLIANCE ITEM Halogen and Antimony Free

Data sheet FIXED CHIP RESISTORS; RECTANGULAR TYPE & WIDE TERMINATION. AEC-Q200 qualified. RoHS COMPLIANCE ITEM Halogen and Antimony Free No.: TWMC K HTS-0001 /4 Date: 2017. 4. 21 Data sheet Title: FIXED CHIP RESISTORS; RECTANGULAR TYPE & WIDE TERMINATION Style: TWMC32, 50, 63 AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen and Antimony

More information

NTC Thermistors, Accuracy Line

NTC Thermistors, Accuracy Line N Thermistors, Accuracy Line FEATURES Accuracy over a wide temperature range High stability over a long life Excellent price/performance ratio APPLICATIONS Temperature sensing and control QUICK REFERENCE

More information

EMI Suppression PCRC 420 film capacitors (RC unit)

EMI Suppression PCRC 420 film capacitors (RC unit) MKP RADIAL POTTED CAPACITORS Pitch 15.0/17.5 mm P = 15.0 / 17.5mm QUICK REFERENCE DATA Capacitance value Capacitance tolerance Resistance value Resistance tolerance Rated (AC) voltage 50 to 60 Hz Climatic

More information

MKP-X2 TECHNICAL TERMS EXPLANATION

MKP-X2 TECHNICAL TERMS EXPLANATION TECHNICAL TERMS EXPLANATION Rated capacitance Capacitance referred to 1 khz, 20 +-1ºC, 65+-2% of relative humidity and 96+- 10 kpa. In case of doubt please refer to IEC 60068-1, sub-clause 5.2. Capacitance

More information

50 TZV 1500 M JDE VB 18X21.5

50 TZV 1500 M JDE VB 18X21.5 EXTENDED BASE FEATURES: VB- VIBRATION BASE AEC-Q200 SURFACE MOUNT ROHS COMPLIANT APPLICATIONS: AUTOMOTIVE POWER INDUSTRIAL SPEC: VALUE: MPN :50 TZV 1500 M JDE VB 18X21.5 VDC 50 CAPACITANCE 1500μF +/- 20%

More information

Applications R66 E D 3100 AA 7A J. Capacitance Code (pf) digits represent significant figures. First digit specifies the number of zeros to be added.

Applications R66 E D 3100 AA 7A J. Capacitance Code (pf) digits represent significant figures. First digit specifies the number of zeros to be added. R66, Radial, 7.5 mm Lead Spacing, 50 630 VDC (Automotive Grade) Overview The R66 Series is constructed of metallized polyester film (wound or stacked technology) with radial leads of tinned wire. Radial

More information

Multilayer Ceramic Chip Capacitors

Multilayer Ceramic Chip Capacitors HIGH VOLTAGE SERIES JARO high voltage series Multilayer Ceramic Capacitors are constructed by depositing alternative layers of ceramic dielectric materials and internal metallic electrodes, by using advanced

More information

Ceramic Disc Capacitors Class 1, 3 kv DC

Ceramic Disc Capacitors Class 1, 3 kv DC S Series Ceramic Disc Capacitors D D FEATURES Low losses High stability Tangent line SH Tangent line SH High capacitance in small size Kinked (preferred) or straight leads Compliant to RoHS directive 2002/095/EC

More information

Metallized Polyester Film Capacitors MKT Radial Potted Type

Metallized Polyester Film Capacitors MKT Radial Potted Type www.vishay.com Metallized Polyester Film Capacitors MKT Radial Potted Type FEATURES 7.5 mm lead pitch Supplied loose in box and taped on reel or ammopack Material categorization: for definitions of compliance

More information

AC and Pulse Metallized Polypropylene Film Capacitors MKP Axial Type

AC and Pulse Metallized Polypropylene Film Capacitors MKP Axial Type Vishay Roederstein AC and Pulse Metallized Polypropylene Film Capacitors FEATURES Supplied loose in box, taped on ammopack or reel available on request l t APPLICATIONS High current and high pulse operations

More information

3 CONDUCTIVE POLYMER ALUMINUM ELECTROLYTIC CAPACITORS

3 CONDUCTIVE POLYMER ALUMINUM ELECTROLYTIC CAPACITORS 3 CONDUCTIVE POLYMER ALUMINUM ELECTROLYTIC CAPACITORS Hi-CAP (Conductive Polymer Aluminum Electrolytic Capacitor) Hi-CAP is an electrolytic capacitor that uses a highly electric conductive polymer as it

More information

Metallized PPS Capacitors for extreme capacitance stability. 1 min / 23 C B

Metallized PPS Capacitors for extreme capacitance stability. 1 min / 23 C B Replaces CKM 501 B series Applications & Characteristics Railway signalling High-temperature (125 C) High capacitance stability Harmonized circuits Filtering High-reliability circuits Security applications

More information

Applications. Capacitance Tolerance G = ±2% J = ±5%

Applications. Capacitance Tolerance G = ±2% J = ±5% Surface Mount Metallized PPS Film Capacitor LDB, Unencapsulated Stacked Chip, Size 1206 1812, 16 and 50 VDC Overview Polyphenylene sulphide (PPS) film capacitor for surface mounting. Applications Typical

More information

High Operating Temperature Radial Leaded Multilayer Ceramic Capacitors for Automotive Applications, 50 V DC, 100 V DC, 200 V DC

High Operating Temperature Radial Leaded Multilayer Ceramic Capacitors for Automotive Applications, 50 V DC, 100 V DC, 200 V DC High Operating Temperature Radial eaded Multilayer Ceramic Capacitors for Automotive Applications, 5 V DC, 1 V DC, 2 V DC FEATURES AEC-Q2 qualified with PPAP available High reliability MCC insert with

More information

AC and Pulse PCMP 389 Metallized Polypropylene film capacitors

AC and Pulse PCMP 389 Metallized Polypropylene film capacitors MKP RADIAL POTTED CAPACITORS Pitch 10.0/15.0/22.5/27.5mm (reduced pitch 7.5mm) QUICK REFERENCE DATA Capacitance range (E24 series) Capacitance tolerance Rated voltage (DC) Climatic category Temperature

More information

AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type

AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type FEATURES 7.5 mm to 37.5 mm lead pitch; 7.5 mm bent back pitch Low contact resistance Low loss dielectric Small dimensions

More information

Metallized Polypropylene Film Capacitor DC-Link Capacitor MKP Type

Metallized Polypropylene Film Capacitor DC-Link Capacitor MKP Type Metallized Polypropylene Film Capacitor DC-Link Capacitor MKP Type FEATURES Slim line, low building height Very long useful life time: Up to 100 000 h at U NDC and 70 C High ripple current capability,

More information

Ceramic Disc DC Capacitors Class 2, Low Loss 500 V, 1 kv, 2 kv and 3 kv

Ceramic Disc DC Capacitors Class 2, Low Loss 500 V, 1 kv, 2 kv and 3 kv Ceramic Disc DC Capacitors Class 2, tangent line D SH FEATURES High reliability Low losses High capacitance in small size Kinked leads Compliant to RoHS directive 2002/95/EC F Capacitors with inside kink

More information

SPECIFICATION WHITE SIDE VIEW LED. Customer. Approved by Approved by Approved by / / / Supplier. Drawn by Checked by Approved by / / /

SPECIFICATION WHITE SIDE VIEW LED. Customer. Approved by Approved by Approved by / / / Supplier. Drawn by Checked by Approved by / / / SPECIFICATION ITEM MODEL WHITE SIDE VIEW LED CUSTOMER Customer Approved by Approved by Approved by / / / Supplier Drawn by Checked by Approved by / / / Contents 1. Features 2. Applications 3. Absolute

More information

Applications C9T S 5 M D 6137 AAR X. Internal Connection. Terminal Style. M = Screw clamp Terminal

Applications C9T S 5 M D 6137 AAR X. Internal Connection. Terminal Style. M = Screw clamp Terminal Overview Polypropylene metallized film with cylindrical aluminium can type filled with resin, 3 phase delta connection and safety device FPU. Applications Typical applications power factor correction.

More information

Ceramic Disc Capacitors Class 1 and 2, 500 V DC, General Purpose

Ceramic Disc Capacitors Class 1 and 2, 500 V DC, General Purpose D Series Ceramic Disc Capacitors D D FEATURES Low losses High stability Tangent line SH Tangent line SH High capacitance in small size Kinked (preferred) or straight leads Compliant to RoHS directive 2002/95/EC

More information

MULTILAYER CERAMIC CAPACITORS

MULTILAYER CERAMIC CAPACITORS 1. DESCRIPTION MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. WTC s MT

More information

Data sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE AND HIGH POWER ANTI SURGE. AEC-Q200 qualified

Data sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE AND HIGH POWER ANTI SURGE. AEC-Q200 qualified No.: RPCH-K-HTS-0001 /2 Date: 2017.4.21 Data sheet Title: Style: FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE AND HIGH POWER ANTI SURGE RPCH16,20,32,35 AEC-Q200 qualified RoHS COMPLIANCE ITEM Halogen

More information

Electromagnetic Interference Suppression Capacitors Class X2 305/310VAC TECHNICAL SPECIFICATION. Metallized Polypropylene Film Capacitors (MKP)

Electromagnetic Interference Suppression Capacitors Class X2 305/310VAC TECHNICAL SPECIFICATION. Metallized Polypropylene Film Capacitors (MKP) Electromagnetic Interference Suppression Capacitors Class X2 305/310VAC ISKRA, d.d. Type: KNB1580 Issue: April 2018 PE ISKRA KONDENZATORJI d.d., Vajdova ulica 71, 8333 Semič, SLOVENIA Phone: +386 738 49

More information

Aluminum Can Power Film Capacitors C44P/C20A Series, 330 1,000 VAC/700 2,300 VDC, for PFC & AC Filter. Application C 44 P L G R A A S J

Aluminum Can Power Film Capacitors C44P/C20A Series, 330 1,000 VAC/700 2,300 VDC, for PFC & AC Filter. Application C 44 P L G R A A S J Aluminum Can Power Film Capacitors C44P/C20A Series, 330 1,000 VAC/700 2,300 VDC, for PFC & AC Filter Overview The C44P/C20A series is a polypropylene metallized film capacitor with a cylindrical, aluminium

More information

ALUMINUM ELECTROLYTIC CAPACITORS REFERENCE SHEET

ALUMINUM ELECTROLYTIC CAPACITORS REFERENCE SHEET TO Messrs. AVNET ABACUS ALUMINUM ELECTROLYTIC CAPACITORS REFERENCE SHEET CUSTOMER PART No. Rubycon PART No. 35 TLV 470 M 12.5X13.5 DRAWING No. RERS 011758 ISSUE No. 1 ISSUE DATE 25 AUGUST 2010 ENGINEERING

More information

COPAL ELECTRONICS. F T T V 5 k Ω ( ) SINGLE TURN CERMET TRIMMERS FEATURES PART NUMBER DESIGNATION

COPAL ELECTRONICS. F T T V 5 k Ω ( ) SINGLE TURN CERMET TRIMMERS FEATURES PART NUMBER DESIGNATION SINGLE TURN INTERNAL STRUCTURE 4 5 8 6 FEATURES Lead-free soldering, Cadmium-free Nominal resistance tolerance ± 0 % O ring sealed and washable Suitable for automatic insertion and automatic adjustment

More information

Applications C28 4 A C A 4300 AL 0 J. Terminal Style

Applications C28 4 A C A 4300 AL 0 J. Terminal Style C8, Cylindrical Plastic Case, Segmented Film 40 VAC/470 VAC Overview The C8 capacitor is a polypropylene metallized segmented film capacitor with a cylindrical, plastic can-type design filled with resin.

More information

1000 to pf (E3 series) Dielectric material K2000 K5000 K14000 Rated DC voltage 100 V 100 V 63 V Tolerance on capacitance ±10% 20/+50% 20/+80%

1000 to pf (E3 series) Dielectric material K2000 K5000 K14000 Rated DC voltage 100 V 100 V 63 V Tolerance on capacitance ±10% 20/+50% 20/+80% , Class 2, 63,, V and 1 V (DC) handbook, 4 columns FEATURES General purpose Coupling and decoupling Space saving. APPLICATIONS In electronic circuits where non-linear change of capacitance with temperature

More information

Film Capacitors. Metallized Polyester Film Capacitors (MKT) Series/Type: B32593, B32594 Date: December 2018

Film Capacitors. Metallized Polyester Film Capacitors (MKT) Series/Type: B32593, B32594 Date: December 2018 Film Capacitors Metallized Polyester Film Capacitors (MKT) Series/Type: B32593, B32594 Date: December 2018 TDK Electronics AG 2018. Reproduction, publication and dissemination of this publication, enclosures

More information

Plastic Film Capacitor

Plastic Film Capacitor 2018 Products Catalog Plastic Film Capacitor New New New New New New New Main Applications & Main Products Switching Power Supply ECQUA ECQE(AC) ECQUG ECQUL ECQUA ECQE(AC) ECQUG ECQUL ECQUL ECQUL ECQE

More information

594D 477 X0 004 R 2 T TYPE CAPACITANCE CAPACITANCE TOLERANCE DC VOLTAGE RATING AT + 85 C

594D 477 X0 004 R 2 T TYPE CAPACITANCE CAPACITANCE TOLERANCE DC VOLTAGE RATING AT + 85 C TANTAMOUNT Conformal Coated, PERFORMANCE/ELECTRICAL CHARACTERISTICS Operating Temperature: - 55 C to + 85 C. (To + 125 C with voltage derating.) Capacitance Range: 1.0 µf to 1500 µf Capacitance Tolerance:

More information

Recommended Hole Pattern: [mm]

Recommended Hole Pattern: [mm] Dimensions: [mm] Recommended Hole Pattern: [mm] Electrical Properties: Properties Test conditions Value Unit Tol. Capacitance 1 V/ 1 khz ± 0.2 khz C 680 nf ±10% Rated Voltage U R 400 V (DC) Insulation

More information

Low Inductance Ceramic Capacitor (LICC)

Low Inductance Ceramic Capacitor (LICC) Low Inductance Ceramic Capacitor (LICC) LICC(Low Inductance Ceramic Capacitor) is a kind of MLCC that is used for decoupling in High Speed IC. The termination shape of LICC is different from that of MLCC.

More information

4 400 VDC VDC H ±3 % J ±5 % 40 C to +105 C 400 VDC, 630 VDC

4 400 VDC VDC H ±3 % J ±5 % 40 C to +105 C 400 VDC, 630 VDC Plastic Film Capacitors Metallized Polypropylene Film Capacitor Type: ECWF(L) Designed for high frequency and current applications. Features Small size Excellent frequency characteristics Low loss 8 C,

More information

Metallized Polyester Film Capacitors MKT Radial Potted Types

Metallized Polyester Film Capacitors MKT Radial Potted Types www.vishay.com Metallized Polyester Film Capacitors MKT Radial Potted Types FEATURES Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS Blocking, bypassing,

More information

FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE & HIGH OHM. RoHS COMPLIANCE ITEM Halogen and Antimony Free

FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE & HIGH OHM. RoHS COMPLIANCE ITEM Halogen and Antimony Free Spec. No.: RHC K HTS 0001 /8 Date: 2017. 1. 10 Specification Title: FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE & HIGH OHM Style:,20 RoHS COMPLIANCE ITEM Halogen and Antimony Free Product specification

More information

Precision Leaded Resistors

Precision Leaded Resistors FEATURES Approved according to CECC 40101-806 Advanced thin film technology Low TC: ± 15 to Precision tolerance of value: ± 0.1 % and ± 0.25 % Superior overall : class 0.05 Wide precision range: 10 to

More information