ATEX/IECEx RTD temperature probe
|
|
|
- Joshua Allan Marsh
- 5 years ago
- Views:
Transcription
1 Page 1/8 ATEX/IECEx RTD temperature probe with connecting cable acc. to DIN EN For temperatures from -100 to +600 C As single, double, or triple RTD temperature probe In two-wire, three-wire, or four-wire circuit Shielded connecting cables (silicone, PTFE, metal braiding/glass fiber, PVC, PUR, FEP, RADOX, BETAflam ) Application-specific design types Brief description Due to their specific features, ATEX/IECEx RTD temperature probes with connecting cables are used in pharmaceutical and chemical plants, power plants, pipelines, on test rigs, in engine manufacturing, and at any measuring locations requiring flexibility and simple replacement. The good thermal transfer between the protection tube and temperature sensor enables short response times and excellent measuring accuracy. The special construction guarantees a long operating life. A Pt100 temperature sensor according to DIN EN 60751, class AA, A or B in a two-wire, threewire or four-wire circuit is used as a measuring insert as standard versions with Pt500, Pt1000, Ni1000, or NTC are also possible. Basic type /80 Ex i and /90 Ex e Basic type /81 Ex i and /91 Ex e Basic type /82 Ex i and /92 Ex e Approvals/approval marks (see "Technical data")
2 Page 2/8 Technical data Connection Connecting cable ends stripped bare or with the insulation stripped in part, available with ferrules (standard), with plug-in sleeves, or multi-pole plug connectors Connecting cable Silicone Ambient temperature -50 to +180 C PTFE Ambient temperature -190 to +260 C Metal braiding/ glass fiber Ambient temperature -50 to +350 C PUR Ambient temperature -30 to +105 C PVC Ambient temperature -5 to +80 C or -5 to +105 C FEP Ambient temperature -5 to +105 C RADOX Ambient temperature -40 to +120 C BETAflam Ambient temperature -40 to +120 C FPM Ambient temperature -50 to +180 C PEEK Ambient temperature -60 to +180 C Protection tube Stainless steel AISI 316, Ø 3 mm, Ø 4 mm, Ø 5 mm, Ø 6 mm, Ø 7 mm, Ø 8 mm, and Ø 9 mm or in the case of the mineral-insulated RTD temperature probe: stainless steel , Ø 1.9 mm, Ø 3 mm, and Ø 6 mm Protection tube constant As the diameter of the temperature probe varies, the protection tube constant varies as follows: 3.0 mm = 220 K/W 3.3 mm = 180 K/W 4.0 mm = 110 K/W 5.0 mm = 80 K/W The protection tube constant describes how the temperature rises on the surface of the probe as work is performed and must be taken into account when dimensioning the intrinsically safe electrical circuit and selecting the temperature class. Process connection Thread, clamping socket (clamp), or JUMO PEKA hygienic process connection Measuring insert Standard: Pt100 temperature sensor, DIN EN 60751, class AA, A or B available in two-wire, three-wire, or four-wire circuit NTC upon request
3 Page 3/8 Approvals/approval marks Approval mark Testing agency Certificates/ Inspection basis Certification numbers II 1/2 G Ex ia IIC T1... T6 Ga/Gb Electrosuisse SEV 13 ATEX 0197 EN : A11:2013 II 1/2 G Ex ib IIC T1... T6 Ga/Gb EN :2012 EN :2007 II 1/2 D Ex ia IIIC T60 C... T80 C Da/Db IP6X II 1/2 D Ex ib IIIC T60 C... T80 C Da/Db IP6X II 2 G Ex ia IIC T1... T6 Gb Electrosuisse SEV 13 ATEX 0197 EN : A11:2013 II 2 G Ex ib IIC T1... T6 Gb EN :2012 EN :2007 II 2 D Ex ia IIIC T60 C... T80 C Db IP6X II 2 D Ex ib IIIC T60 C... T80 C Db IP6X II 1/2 G Ex ia IIC T1... T6 Ga/Gb Electrosuisse IECEx SEV IEC :2011 II 1/2 G Ex ib IIC T1... T6 Ga/Gb IEC :2011 IEC :2006 II 1/2 D Ex ia IIIC T60 C... T80 C Da/Db IP6X II 1/2 D Ex ib IIIC T60 C... T80 C Da/Db IP6X II 2 G Ex ia IIC T1... T6 Gb Electrosuisse IECEx SEV IEC :2011 II 2 G Ex ib IIC T1... T6 Gb IEC :2011 IEC :2006 II 2 D Ex ia IIIC T60 C... T80 C Db IP6X II 2 D Ex ib IIIC T60 C... T80 C Db IP6X II 1/2 G Ex e IIC T1... T6 Ga/Gb Electrosuisse SEV 05 ATEX 0137 EN :2009 II 1/2 D Ex tb IIIC T60 C... T80 C IP65 Da/Db EN :2007 EN :2007 EN :2009 II 2 G Ex e IIC T1... T6 Gb Electrosuisse SEV 05 ATEX 0137 EN :2009 II 2 D Ex tb IIIC T60 C... T80 C IP65 Db EN :2007 EN :2007 EN :2009
4 Page 4/8 Dimensions rigid = 50 flexible EL 40 AL D Basic type /80 Basic type /81 Basic type /82 Basic type /90 Basic type /91 Basic type /92
5 Page 5/8 Order details (1) Basic type /80 Ex i Screw-in RTD temperature probe /81 Ex i Push-in RTD temperature probes /82 Ex i Mineral-insulated RTD temperature probes (operating temperature in area of the sheath cable: -50to+600 C) D EL 40 AL (2) Operating temperature in C (connecting cable) x x x to +180 C (PEEK) x x x to +180 C (FPM) x x x to +180 C (silicone) x x x to +260 C (PTFE) x x x to +400 C (metal braiding/glass fiber) x x x to +120 C (RADOX ) x x x to +120 C (BETAflam ) x x x to +80 C (PVC) x x x to +105 C (PVC) x x x to 105 C (PUR) x x x to 105 C (FEP) (3) Measuring insert x x x Pt100 in three-wire circuit x x x Pt100 in two-wire circuit x x x Pt1000 in two-wire circuit x x x Pt100 in four-wire circuit x x x Pt100 in three-wire circuit (protection tube diameter as of 6 mm with basic type /82) x x x Pt100 in two-wire circuit x x x Pt1000 in two-wire circuit x x Pt100 in four-wire circuit x x Pt100 in 2 three-wire and 1 two-wire circuit (4) Tolerance class according to DIN EN x x x 1 Class B x x x 2 Class A x x x 3 Class AA (5) Protection tube diameter D in mm x 1.9 Ø 1.9 mm (sheath cable Ø 1.5 mm) x x x 3 Ø 3 mm x x 4 Ø 4 mm x x 5 Ø 5 mm x x x 6 Ø 6 mm x x 7 Ø 7 mm x x 8 Ø 8 mm x x 9 Ø 9 mm (6) Insertion length EL in mm (20 to mm)
6 Page 6/8 x x x... Specification in plain text (7) Process connection x x 000 None x 102 Screw connection G 1/4 x 104 Screw connection G 1/2 x 106 Screw connection G 1 x 114 Screw connection M10 1 x 115 Screw connection M x 121 Screw connection M x 163 Union nut G 3/8 x 164 Union nut G 1/2 x 165 Union nut G 3/4 x 254 Compression fitting G 1/2 x 611 Clamping socket (clamp) DN 10/20 DIN (AISI 316 L) x 613 Clamping socket (clamp) DN 25/40 (1 /1.5 ) DIN (AISI 316 L) x 616 Clamping socket (clamp) DN 50 (2 ) DIN (AISI 316 L) x 617 Clamping socket (clamp) 2.5 similar to DIN (AISI 316 L) x 997 JUMO PEKA hygienic process connection (AISI 316 L) (suitable process connection adapters, data sheet ) (8) Process connection material x x x 00 None x x 24 CrNi (AISI 316 L) x x 26 CrNi (AISI 316 Ti) x x 31 CrNi (AISI 316 L) x x 46 CuZn (brass) (9) Connecting cable end x x x 03 Bare connection wires x x x 05 Part stripping of the insulation x x x 11 Ferrules (standard) x x x 13 Plug-in sleeve 6.3 x x x 23 Tab connector 6.3 x x x 42 Lemosa coupling x x x 56 Machine connector M12 1 x x x 57 Machine connector M8 1 (10) Connecting cable length AL in mm (20 to mm) x x x... Specification in plain text (11) Extra codes x x x 000 None x x x 058 SIL- and PL-compatible x x 310 Protection tube stepped down from Ø 6 mm to Ø 4 mm x x 315 Strain-relief spring x x 316 Strain-relief hose x x x 317 Shielded connecting cable (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) Order code /,... a Order example / / 315 a List extra codes in sequence, separated by commas.
7 Page 7/8 (1) Basic type /90 Ex e Screw-in RTD temperature probe /91 Ex e Push-in RTD temperature probes /92 Ex e Mineral-insulated RTD temperature probes (operating temperature in area of the sheath cable: -50to+600 C) D EL 40 AL (2) Operating temperature in C (connecting cable) x x x to +180 C (PEEK) x x x to +180 C (FPM) x x x to +180 C (silicone) x x x to +260 C (PTFE) x x x to +400 C (metal braiding/glass fiber) x x x to +120 C (RADOX ) x x x to +120 C (BETAflam ) x x x to +80 C (PVC) x x x to +105 C (PVC) x x x to 105 C (PUR) x x x to 105 C (FEP) (3) Measuring insert x x x Pt100 in three-wire circuit x x x Pt100 in two-wire circuit x x x Pt1000 in two-wire circuit x x x Pt100 in four-wire circuit x x x Pt100 in three-wire circuit (protection tube diameter as of 6 mm with basic type /92) x x x Pt100 in two-wire circuit x x x Pt1000 in two-wire circuit x x Pt100 in four-wire circuit x x Pt100 in 2 three-wire and 1 two-wire circuit (4) Tolerance class according to DIN EN x x x 1 Class B x x x 2 Class A x x x 3 Class AA (5) Protection tube diameter D in mm x 1.9 Ø 1.9 mm (sheath cable Ø 1.5 mm) x x x 3 Ø 3 mm x x 4 Ø 4 mm x x 5 Ø 5 mm x x x 6 Ø 6 mm x x 7 Ø 7 mm x x 8 Ø 8 mm x x 9 Ø 9 mm (6) Insertion length EL in mm (20 to mm) x x x... Specification in plain text (7) Process connection
8 Page 8/8 x x 000 None x 102 Screw connection G 1/4 x 104 Screw connection G 1/2 x 106 Screw connection G 1 x 114 Screw connection M10 1 x 115 Screw connection M x 121 Screw connection M x 163 Union nut G 3/8 x 164 Union nut G 1/2 x 165 Union nut G 3/4 x 254 Compression fitting G 1/2 x 611 Clamping socket (clamp) DN 10/20 DIN (AISI 316 L) x 613 Clamping socket (clamp) DN 25/40 (1 /1.5 ) DIN (AISI 316 L) x 616 Clamping socket (clamp) DN 50 (2 ) DIN (AISI 316 L) x 617 Clamping socket (clamp) 2.5 similar to DIN (AISI 316 L) x 997 JUMO PEKA hygienic process connection (AISI 316 L) (suitable process connection adapters, data sheet ) (8) Process connection material x x x 00 None x x 24 CrNi (AISI 316 L) x x 26 CrNi (AISI 316 Ti) x x 31 CrNi (AISI 316 L) x x 46 CuZn (brass) (9) Connecting cable end x x x 03 Bare connection wires x x x 05 Part stripping of the insulation x x x 11 Ferrules (standard) x x x 13 Plug-in sleeve 6.3 x x x 23 Tab connector 6.3 x x x 42 Lemosa coupling x x x 56 Machine connector M12 1 x x x 57 Machine connector M8 1 (10) Connecting cable length AL in mm (20 to mm) x x x... Specification in plain text (11) Extra codes x x x 000 None x x x 058 SIL- and PL-compatible x x 310 Protection tube stepped down from Ø 6 mm to Ø 4 mm x x 315 Strain-relief spring x x 316 Strain-relief hose x x x 317 Shielded connecting cable (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) Order code /,... a Order example / / 315 a List extra codes in sequence, separated by commas.
Mineral-insulated thermocouples to DIN and EN
Data Sheet 90.1210 (90.1221) Page 1/7 s to DIN 43 710 and EN 60 584 for temperatures from -200 to +1200 C flexible sheath with shock-proof measuring insert protection tube diameter from 0.5mm fast response
ED 701 General Industry Pressure Transmitter
ED 701 General Industry Pressure Transmitter Standard industrial process connections Complete range of electrical connections 4... 20 ma and Voltage outputs Accuracy: 0.1%, 0.2% and 0.4% FS Quick response
Pressure Transmitter ED 701
Pressure Transmitter ED 701 Hygienic and industrial process connections Zero setting function Accuracy < 0.1% FS Quick response time < 25 ms High long-term stability Excellent repeatability Active compensation
DMP 331P. Industrial Pressure Transmitter. Process Connections With Flush Welded Stainless Steel Diaphragm
DMP P Industrial Pressure Transmitter Process Connections With Flush Welded Stainless Steel accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO Nominal pressure from 0... 00 mbar up
A BB ME ASU R E ME NT & AN AL Y T ICS D AT A S H E ET. SensyTemp TSA101 Exchangeable measuring insets
A BB ME ASU R E ME NT & AN AL Y T ICS D AT A S H E ET SensyTemp TSA101 Exchangeable measuring insets 2 SENSYTEMP TSA101 EXCHANGEABLE MEASURING INSETS DS/TSA101-EN REV. E Measurement made easy Compatible
Installation Equipment
Installation Switches made of Moulded Plastic 800 8 Junction Boxes made of Polyester Resin, with Sheath Terminals 80 8 made of Polyester Resin, with... 8 Sheath Terminals 88 8 Terminal Boxes made of Polyester
DMP 331Pi. Precision Pressure Transmitter. pressure ports and process connections with flush welded stainless steel diaphragm
DMP Pi Precision Pressure Transmitter pressure ports and process connections with flush welded stainless steel diaphragm accuracy according to IEC 600: 0, % FSO Nominal pressure from 0... 00 mbar up to
DMP 331. Industrial Pressure Transmitter for Low Pressure. Stainless Steel Sensor
DMP Industrial Pressure Transmitter for Low Pressure Stainless Steel Sensor accuracy according to IEC 60770: : 0.5 % FSO option: 0.5 / 0. % FSO Nominal pressure from 0... 00 mbar up to 0... 60 bar Output
DMP 331Pi. Precision Pressure Transmitter. pressure ports and process connections with flush welded stainless steel diaphragm
DMP Pi Precision Pressure Transmitter pressure ports and process connections with flush welded stainless steel diaphragm accuracy according to IEC 600: 0, % FSO Nominal pressure from 0... 00 mbar up to
Temperature Measurement
Temperature Measurement 157 12 Precise and reliable measurements even in aggressive liquids all probes are encapsulated with PTFE for maximum chemical resistance. PRODUCT TIPS Page 161: 143 PT100 Temperature
Single point load cells
SP4M Single point load cells Special features Maximum capacities: kg 200 kg Aluminum High ratio of minimum verification Offcenter load compensation Shielded connection cable Explosion protection and other
Pressure Measurement. Transmitters for basic requirements SITRANS P MPS (submersible sensor) Transmitter for hydrostatic level 2/27
Overview Siemens AG 011 Function s are for measuring the liquid levels in wells, tanks, channels and dams. Diaphragm p Sensor U const. U + (brown) I EM I -1 (blue) 0, U B s are submersible sensors for
Exchangeable measuring insets SensyTemp TSA101
Contents Data Sheet Exchangeable measuring insets SensyTemp TSA101 for resistance thermometers and thermocouples Structure of electrical thermometers - Exchangeability during operation based on modular
Certificate No.: IECEx BVS issue No. 1 Annex Page 1 of 8 Subject and Type
Certificate No.: IECEx BVS 12.0066 issue No. 1 Page 1 of 8 Subject and Type VEGAFLEX FX81(*). I * * ** * * * * * * * Certificates: X = no, M - yes adjustment / indication module PLICSCOM X = without: A
Z7A. Load cells. Special features. Data sheet. Wiring code
Z7A Load cells Special features - Complies with OIML R60 regulations up to 3000 d - Max. capacities: 500 kg... 10 t - Fulfills EMC requirements in accordance to EN 45 501 - Low transducer height - Robust
4.2. Ex-Ceiling light fittings AB 80 / AB 05 LED / AB 05 / AB 12 NAV 70. (Zone 1, 2, 21, 22)
.2 Ex-Ceiling light fittings AB 8 / AB 5 LED / AB 5 / AB 12 NAV 7 (Zone 1, 2, 21, 22) The wall and ceiling light fixtures for particularly difficult operating conditions The impact-resistant and flameproof
DS 200P. Electronic Pressure Switch. Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm
Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm accuracy according to IEC 600: standard: 0. % FSO option: 0. % FSO Nominal pressure from 0... 00 mbar up to 0... 0 bar
Transmitters for basic requirements SITRANS P MPS (submersible sensor) Transmitter for hydrostatic level
Overview Function s are for measuring the liquid levels in wells, tanks, channels and dams. Sensor Diaphragm p U const. U +2 (brown) I EM I - (blue) 0, U B s are submersible sensors for hydrostatic level
Pressure transmitters for industrial applications MBS 32 and MBS 33
Data sheet Pressure transmitters for industrial applications MBS 32 and MBS 33 The standard pressure transmitters MBS 32 and MBS 33 are designed for use in almost all industrial applications, and offer
Ex-Floodlight PXLED. (Ex-Zone 1, 2, 21 and 22)
Ex-Floodlight PXLED (Ex-Zone 1, 2, 21 and 22) Lighting under harsh conditions The new modular LED floodlight series PXLED is suited for nearly every kind of lighting task in hazardous areas, including
Level Sensor PanCake PR 6251 and Mounting Kit PR 6051
Level Sensor PanCake PR 6251 and Mounting Kit PR 6051 The space-saving solution for simple applications The sensors of the PR 6251 series have been specially designed for simple weighing of silos and horizontal
Certificate No.: IECEx BVS , issue 3 Annex Page 1 of 9
Page 1 of 9 General product information: The Radar-Sensor type VEGAPULS PS6*(*).******** and type VEGAPULS PSSR68(*).******** is used to measure the distance between the surface of combustible dust generating
Welcome. Functionality and application of RTD Temperature Probes and Thermocouples. Dipl.-Ing. Manfred Schleicher
Welcome Functionality and application of RTD Temperature Probes and Thermocouples Dipl.-Ing. Manfred Schleicher This presentation informs about the basics of RTD Temperature Probes and thermocouples Functionality
ct m ive p 5/EC Thermal cut-outs
RoHS Compliant Directive //EC Marking of switches type: AM, AF, AB,, AA. AM0. 0. 0 0/0 -. 0 Strip length Second conductor length First conductor length Type of thermal cut-out Rated switching temperature
I nllk 08018/18 I nllk I nllk 08036/36 I nllk I I nllk 08058/58 I
I nllk / I x W x W x W x W x W Technical data Cooper Crouse-Hinds - all rights reserved nllk / nllk nllk / nllk nllk / Marking to //EC II G Ex na II T / II D td A IP T C EC Conformity Statement PTB ATEX
TF 202 / TF 202-Ex. Field mounted temperature transmitters, FOUNDATION Fieldbus (H1), Pt 100 (RTD), thermocouples, 1 or 2 independent channels
TF 0 / TF 0-Ex Field mounted temperature transmitters, FOUNDATION Fieldbus (H), Pt 00 (RTD), thermocouples, or independent channels 0/-8.69 EN USA Input Resistance thermometer (,, wire circuit) Thermocouples
Pressure Measurement Single-range transmitters for general applications
Siemens AG 07 Overview Function SITRANS LH00 Transmitter for hydrostatic level U const. p U I EM Sensor Connection for auxiliary power supply Vent pipe with humidity filter Protective conductor connection/
Thermometers. Applications
92 Temperature Thermometers Thermometers On the next pages you will find a broad range of thermometers with fixed probes or exchangeable probes with rigid probes or probes with cable and hand grip. The
Industrial Resistance Thermometers according to DIN Model MWD
Industrial Resistance Thermometers according to DIN measuring monitoring analysing MWD OMeasuring O range: -98... +600 ºC O O Pt00 sensor: class A, class B, class /3, class /0, or O O Output: resistance
4.3. Ex-Pendant light fittings AB 50 / SPG 1N / AB 51 / EVI 200 / EVI 500 / EV35 LED. (Zone 1, 2, 21, 22)
.3 Ex-Pendant light fittings AB 5 / SPG 1N / AB 51 / EVI 2 / EVI 5 / EV35 LED (Zone 1, 2, 21, 2 The pendant light fitting series for a wide variety of applications The explosion-protected pendant light
Explosion-protected recessed ceiling LED-light and fluorescent light fittings
.7 Explosion-protected recessed ceiling LED-light and fluorescent light fittings LED 600, RLF LED 100 and self-contained emergency luminaire RLF LED 600 N, RLF LED 100 N RLF/RLF-INOX 50 18-58 W / RLF/RLF-INOX
Surface-mounting Thermostats ATH Type Series
Page 1/9 urface-mounting Thermostats ATH eries k enclosure protection IP 54 k tested to IN EN 14597 (replacing IN 3440) Brief description Thermostats control and monitor thermal processes. Instruments
EX-EMERGENCY LIGHT FITTINGS
EX-EMERGENCY LIGHT FITTINGS nllk 0...N 1-36 W Plastic version for Zone 2 and Zone 21/22 The explosion-protected light fittings of the series nllk 0 N are conform to the requirements of the ATEX-Directive
TF 212 / TF 212-Ex. Field mounted temperature transmitters, PROFIBUS PA, Pt 100 (RTD), thermocouples, 1 or 2 independent channels 10/11-8.
TF / TF -Ex Field mounted temperature transmitters, PROFIBUS PA, Pt 00 (RTD), thermocouples, or independent channels 0/-8.70 EN P R O F I PROCESS FIELD BUS B U S Input Resistance thermometer (,, -wire
8 Installation Equipment
8 Installation Equipment Plugs and Sockets CES System Series 8, 88, 8, 881 Te plugs and sockets in te CES system comply wit CEE publication 1 and European standards EN 0 01. Te small 1 A socket as switcing
SINEAX VK 636 Programmable Temperature Transmitter with PROFIBUS-PA protocol
with PROFIBUS-PA procol for installation in the terminal head of a temperature sensor DIN 79, shape B Application 00 II () G FISCO The SINEAX VK 66 is a temperature transducer for use in aumation systems
Surface-mounting thermostats Series ATH
JUMO GmbH & Co. KG Delivery address:mackenrodtstraße 14, 36039 Fulda, Germany Postal address: 36035 Fulda, Germany Phone: +49 661 6003-0 Fax: +49 661 6003-607 E-mail: mail@jumo.net Internet: www.jumo.net
Field IT 50T Series Transmitters
Data Sheet SS/G/A_ Field IT 0T Series Transmitters gauge/absolute pressure transmitter Ranges: -00 to 0000kPa - to 00bar -. to 6000psi Base accuracy : 0.% (BFSL) Chemical Vapour Deposition (CVD) technology
Silicon Temperature Sensors KT 100 KT 110 KT 130 KT 210 KT 230. KTY 11-x KTY 13-x KTY 21-x KTY 23-x KTY 19-6 KTY 16-6
Silicon Temperature Sensors KT 100 KT 110 KT 130 KT 210 KT 230 KTY 16-6 KTY 10-x KTY 11-x KTY 13-x KTY 21-x KTY 23-x KTY 19-6 Features Temperature dependent resistor with positive temperature coefficient
v = m / s Thermal Flow Sensors TA with thin-film sensor element Probes Probe Guides Measuring Tubes
Thermal Flow Sensors TA with thin-film sensor element Probes Probe Guides Measuring Tubes Examples of Application Flow measurements also in hazardous locations X zone 0 or zone 1 in clean rooms in air
4.13. Ex-Floodlights of the series FMV LED / NSSFMV. (Zone 2, 22) service life and a high level of efficiency. NFMV floodlights for highpressure
.13 Ex-Floodlights of the series / (Zone 2, 22) The powerful LED floodlights FMV LED The new series of energy-saving FMV floodlights in LED technology are ideal for all general lighting applications in
Conductivity sensor for hygienic applications
Conductivity sensor for hygienic applications Type 8221 can be combined with Perfect for demanding applications in the hygienic industry (CIP and SIP compatible) Variants available for usage over a wide
Temperature sensors SensyTemp TSP311, TSP321, TSP331
Contents Data Sheet Temperature sensors SensyTemp TSP311, TSP321, TSP331 Modular system - Measuring inset, thermowell, extension tube, connection head, transmitter - Supports numerous configurations Exchangeable
TF 212 / TF 212-Ex. Field mounted temperature transmitter, Profibus PA, Pt 100 (RTD), thermocouples, 1 or 2 independent channels. ABB Instrumentation
TF / TF -Ex Field mounted temperature transmitter, Profibus PA, Pt 00 (RTD), thermocouples, or independent channels 0/-8.70 EN According to PROCESS FIELD BUS 0Input Resistance thermometer (,, -wire method)
Ex floating switches and Ex immersion probes
Ex floating switches and Ex immersion probes Controlling devices with ball-operated microswitch, for signalling or regulation of liquid levels Jola Spezialschalter GmbH & Co. KG Klostergartenstr. 11 67466
Load Cells. 3/2 Introduction. 3/3 Mounting components 3/3 Introduction
Siemens AG 2018 /2 Introduction / Mounting components / Introduction /4 Single point load cells /4 Overview /5 SIWAREX WL260 SP-S AA /5 - Load cell /6 SIWAREX WL260 SP-S AB /6 - Load cell /7 SIWAREX WL260
ANNEX to IECEx Certificate
ANNEX to IECEx Certificate Certificate No.: IECEx ZLM 11.0001X Issue No.: 0 Date of Issue: 2011-09-14 Type designation code EDP300 xx * * * * * ** ** ** ** xx ** ** ** ** ** ** ** ** Limit Switches: without,
Sales: Malux Finland Oy, P.O.Box 69, FI Porvoo, Phone , Fax ,
E X - L I G H T F I T T I N G S nllk 0... 1 - W All-plastic design for Zone 2 and Zone 21/22 The explosion-protected light fittings of the series nllk 0 conform to the requirements of the ATEX-Directive
Ring-Torsion Load Cells RTB
Ring-Torsion Load Cells RTB % PTB & OIML approved as suitable for trade use (up to 6000 d and 7500 d in case of multi-divisional scales) % High accuracy, even for very small utilisation ranges (down to
CDS. high density spring connection
CDS high density spring connection DENSTY STANDARD 1A CDS DENSTY A A spring connection CDS Series The originality of multipole connectors represents one of the core values of LE, a leading company in this
Solenoid valves 2/2-way direct-operated type EV210A
MAKING MODERN LIVING POSSIBLE Data sheet Solenoid valves 2/2-way direct-operated type EV210A EV210A covers a wide range of small, direct-operated 2/2-way solenoid valves for use in industrial machinery.
ZF Series Force Transducers
Data Sheet Series Force Transducers FEATURES 1 kn to 00 kn High accuracy For tensile or pressure forces Made of stainless steel Enclosure protection IP 67 DESCRIPTION The force transducers of the series
Ex-Floodlights of the series FMV LED / NFMV / NSSFMV. Stainless steel NSSFMV floodlights for particularly. in harsh environments
.13 Ex-Floodlights of the series / / (Zone 2, 21, 22) The powerful LED floodlights FMV/nFMV LED The new series of energy-saving FMV floodlights in LED technology are ideal for all ge neral lighting applications
PN LINE. PN Line. PX Line. PA Line. PU Line PX LINE. PV Line PA LINE & TUBINGS PU LINE PV LINE. Brass Push-in fittings
I NDEX PV LINE PX LINE PU LINE PA LINE & TUBINGS PN LINE Brass Push-in fittings Stainless Steel Push-in fittings Brass Standard fittings and Flexible Hoses Couplings and Multiple Connectors Function fittings
Construction and application of resistance thermometers
Page 1/15 Construction and application of resistance thermometers Temperature-dependent resistance The variation of the electrical resistance of metals with temperature is very often employed for the electrical
CONTACT TEMPERATURE MEASUREMENT
SPECIAL CABLES TEMPERATURE MEASUREMENT HARNESSING CONTACT TEMPERATURE MEASUREMENT FOR COMPUTER TECHNOLOGY 151115 / Fotolia CONTENT page < Who we are......................................................................................
PRODUCT CATALOGUE PREssURE switch
PRODUCT CATALOGUE PREssURE switch w w w. p a a b. c o m Pressure AT THe HIGHesT LeVeL Successful mediumsized companies are not successful because they are active in many areas, but rather because they
TABLE OF CONTENT. ATEX Certificate. Designation code. Circuit diagrams. Sensors. Sensors. Explosion-proof sensors from Pulsotronic
TABLE OF CONTENT ATEX Certificate Explosionproof sensors from Pulsotronic code How to read sensor designations Circuit diagrams Connection according to EN 606 Sensors Cylinder M8 Cylinder M Cylinder M8
E X - C O N T R O L U N I T S A N D C O N T R O L S T A T I O N S
E X - C O N T R O L U N I T S A N D C O N T R O L S T A T I O N S EX- CONTROL UNITS AND CONTROL STATIONS EX- INSTALLATION SWITCH.. EX- CONTROL STATIONS INDIVIDUAL EX- CONTROL STATIONS.. 0 EX- CONTROL AND
Direct-operated 2/2-way compact solenoid valves Type EV210A
Data sheet Direct-operated 2/2-way compact solenoid valves Type EV210A EV210A covers a wide range of small, directoperated 2/2-way solenoid valves for use in industrial machinery. The compact design together
2.12. Ex-Linear light fittings for fluorescent lamps. nllk W - 58 W (Zone 2, 21, 22)
.1 Ex-Linear light fittings for fluorescent lamps nllk 08 18 W - 58 W (Zone, 1, ) The lighting solution for hazardous areas in Zones, 1 and The linear luminaires series nllk 08 for fluorescent lamps combines
Air velocity & IAQ measuring instruments
Data sheet dp Air velocity & IAQ measuring instruments - air velocity & IAQ measuring instrument - dp air velocity & IAQ measuring instrument incl. differential pressure C CO Intuitive: clearly structured
Surface-mounting double thermostat
sales@jumo.co.uk info@jumo.us Page /0 urface-mounting ouble thermostat ATH type series Particularities! Flui expansion! Micro switch! elf-monitoring (TB/TW)! afety cut-out (TB/TW)! separate measuring an
Installation guide 862 MIT / MIR
Installation guide 862 MIT / MIR in combination with: 864 MTT or 863 MRT or (dual) spot element November 2005 Part no. 4416.232_Rev3 Enraf BV PO Box 812 2600 AV Delft Netherlands Tel. : +31 15 2701 100
Size A DIN EN
Size A DIN EN 70-0 Actuators 0 series DIN EN 70-0 +, + ow and high housing Degree of protection IP6 Wired versions Moulded versions Degree of protection IP67 Contacts Thread Cable outlet Ordering-No. Female
Field mounted Temperature Transmitter TF212/TF212-Ex
Data Sheet Field mounted Temperature Transmitter TF/TF-Ex PROFIBUS PA, Pt 00 (RTD), Thermocouples, or independent channels Input Resistance thermometer (,, -wire circuit) Thermocouples Resistance remote
v = 00,20 m/s Thermal Flow Sensors TA with thin-film sensor element Probes Probe guides Measuring tubes
with thin-film sensor element Probes Probe guides Measuring tubes Examples of Application Flow measurements also in hazardous locations Ex zone 0 or zone 1 in clean rooms in air conditioning and ventilating
Thermal-Magnetic Circuit Breaker 2210-S2...
Thermal-Magnetic Circuit Breaker 0-S... Description One, two and three pole thermal-magnetic circuit breakers with trip free mechanism and toggle actuation (S-type TM CBE to EN 60934/IEC 934). Designed
Thermal-Magnetic Circuit Breaker 2210-S2...
Description One, two and three pole thermal-magnetic circuit breakers with trip free mechanism and toggle actuation (S-type TM CBE to EN 6094/IEC 94). Designed for panel or plug-in mounting. Available
SEN TRONIC AG 1 A 6 6 / "
1A 66/" 0!"#$%&'() %"*+", - %"*.", - /01234%( 34.+*!54%& 0*%/# "6#,7857.'.0" - 6#)9.:. &%&;! 0 &????'.&% )&" 8" @&& (++ '() %('.('/(#$!!! ' %! %!& ;!;8 ;!;8 0 &&'&&;! C;!C&(D"@@ &;! 0&&+%&;! C&=;!C&(D"@@
Air velocity & IAQ measuring instruments
Data sheet dp Air velocity & IAQ measuring instruments - air velocity & IAQ measuring instrument - dp air velocity & IAQ measuring instrument incl. differential pressure C CO Intuitive: clearly structured
Type UB1 Load Cell. Option Stainless steel cable gland
Type UB1 Load Cell IP68 APPROVED Product Description Type UB1 is a stainless steel universal load cell which allows for tension and compression loading. Its complete hermetic sealing makes it suitable
SINEAX VK 626 Programmable Temperature Transmitter for RTD and TC inputs, with HART protocol
SINEAX VK 66 for RTD and TC inputs, with HART procol for installation in the terminal head of a temperature sensor DIN 79, shape B Application II () G SINEAX VK 66 is a two-wire head-mounted transmitter.
Switches in conformity with ATEX directive
E Switches in conformity with ATEX directive page / General Catalog 09-0 Technical concepts page /9 A B Position switches FD series page / Category Zone Approvals Article code extension G M ATEX category
Capacitive Sensors. Contents
Contents Capacitive sensors detect the change in capacitance caused by the approach of an object. Their advantage lies in the ability to detect virtually any material, from metals to oils. 4.2 Definitions,
Industrial Pressure Transmitter
ECT 87 Industrial Pressure Transmitter Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for measurement of and temperature. The economical transmitter
Thermal-Magnetic Circuit Breaker 2210-S2..
Thermal-Magnetic Circuit Breaker -S.. Description One, two and three pole thermal-magnetic circuit breakers with trip free mechanism and toggle actuation (S-type TM CBE to EN 6094/IEC 94). Designed for
ISEmax CAS40D. Technical Information
Technical Information ISEmax CAS40D Online measurement of nutrient parameters Ion-selective electrodes for the continuous measurement of ammonium, nitrate and other ions Application The ion-selective sensor
Direct-operated 2/2-way solenoid valves Type EV210B
Data sheet Direct-operated 2/2-way solenoid valves Type EV20B EV20B covers a wide range of direct-operated 2/2-way solenoid valves for universal use. EV20B is a very robust valve program with high performance
Linear Motors with ATEX and IECEx Certification
Linear Motors with EX Linear Motors with TEX and IECEx Certification Designed for explosion proof environement Categories: gas zones 1/2, dust zones 21/22 Stainless steel housing EN1.444 / ISI 316 Completely
fischer connectors General Catalogue Edition 5.2
fischer connectors Edition. General Catalogue SUMMARY Ordering Information Mechanical Specifications Electrical Specifications Thermocouple Connectors Part number system and definitions, Body styles Coaxial,
Thermal-Magnetic Circuit Breaker 2210-S2..
Thermal-Magnetic Circuit Breaker -S.. Description One, two and three pole thermal-magnetic circuit breakers with trip free mechanism and toggle actuation (S-type TM CBE to EN 60934/IEC 934). Designed for
S95.3U01 / S95.3U11. Head mounted temperature transmitters, programmable, Pt 100 (RTD), thermocouples, electrical isolation
S95.U0 / S95.U Head mounted temperature transmitters, programmable, Pt 00 (RTD), thermocouples, electrical isolation Resistance thermometer (,, wire circuit) Thermocouples Resistance remote signalling
Amphenol. Amphenol-Tuchel Electronics GmbH. Circular Connectors C 091 A/B/D Series
Amphenol Amphenol-Tuchel Electronics GmbH Circular Connectors C 09 A/B/D Series The Company Amphenol-Tuchel Electronics GmbH is a member of the USA based Amphenol Corporation. With our own global presence
GB-distribution boxes and enclosures
GBdistribution boxes and enclosures, polyester, to European Standards (ATEX) Features þ ATEXcertified þ BASEEFAcertified þ Large range of s including BARTEC, Weidmüller, Phoenix þ Different enclosure s
Permanently installed and non-invasive ultrasonic flowmeter for the measurement of thermal energy and volumetric flow rate
Technical specification FLUXUS F502TE Permanently installed and non-invasive ultrasonic flowmeter for the measurement of thermal energy and volumetric flow rate Stationary ultrasonic clamp-on system for
SmartLine Radar Level Meter RM70
Page 1 of 5 SmartLine Radar Level Meter Model Selection Guide Reliable measurement in difficult process conditions +/- 3 mm / +/-0.12" standard accuracy Operates up to a flange temperature of 200 0 C /
DS 200 DS 200 DRUCK & TEMPERATUR LEITENBERGER GMBH. Electronic Pressure Switch. Stainless Steel Sensor. Electronic Pressure Switch
DRUCK & TEMPERATUR LEITENBERGER GMBH DS 00 Electronic Pressure Switch Stainless Steel Sensor accuracy according to IEC 00: standard: 0. % FSO option: 0. % FSO Nominal pressure: from 0... 00 mbar up to
Designed to go where you work
Designed to go where you work Finally, a digital substitute for your mercury-in-glass thermometers! Accurate and repeatable to ± 0.05 C over its full range, the 55A/55A Stik Thermometer is the new gold
Thermal-Magnetic Circuit Breaker 2210-S2..
Thermal-Magnetic Circuit Breaker -S.. Description One, two and three pole thermal-magnetic circuit breakers with trip-free mechanism and toggle actuation (S-type TM CBE to EN 60934/IEC 934). Designed for
Load Washers. Force kn until kn. Type 9101A A
Force Load Washers 0... 20 kn until 0... 700 kn Type 9101A... 9107A Force sensor for measuring quasistatic and dynamic forces in industrial monitoring tasks. F z The force sensors are delivered uncalibrated
Industrial Pressure Transmitter
ECT 87 Industrial Pressure Transmitter Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for measurement of and temperature. The economical transmitter
I Ex d/e Switch- and Control-Equipment I
I Ex d/e Switch- and Control-Equipment I Customised enclosure, covered by Type Examination Certificates, can be individually combined from CEAG s numerous built-in components. Furthermore control units
Pressure. 1 Fitting PA R - N R2
INTERNAL STRUCTURE (R 1/4) 4 1 2 3 FEATURES High corrosion resistance and drip-proof construction port attachment made of Proven IP-65 grade gauge body (IP-65 in accordance with IEC) Standard product provides
Pushbutton Units and Indicator Lights
Insert labels and insert caps Clear, illuminated and indicator lights can be fitted with insert labels and caps for identification purposes. These labels and caps are made of a semi-transparent molded
S95.3U02 / S95.3U12. Head mounted temperature transmitters, HART programmable, Pt 100 (RTD), thermocouples, electrical isolation
S95.U0 / S95.U Head mounted temperature transmitters, HART programmable, Pt 00 (RTD), thermocouples, electrical isolation Resistance thermometer (,, wire circuit) Thermocouples Resistance remote signalling
ISEmax CAM40/CAS40. Technical Information
Technical Information Online measurement of nutrient parameters Ion-selective electrode system for the continuous measurement of ammonium and nitrate Application The ion-selective electrode system works
VA Master FAM540 Metal Cone Variable Area Flowmeter
Contents Data Sheet Rev. B VA Master FAM50 Metal Cone Variable Area Flowmeter For metering liquids, gases and steam Graphic, 2-line display Magnet stick operation Configuration also possible with closed
Amphenol C 091 A/B/D. Circular Connectors. Amphenol-Tuchel Electronics GmbH
Amphenol C 091 A/B/D Circular Connectors Amphenol-Tuchel Electronics GmbH General information These connectors are designed and produced in conformity with the low-voltage directive (/3/EWG) respectively
Physikalisch-Technische Bundesanstalt
Physikalisch-Technische Bundesanstalt Braunschweig und Berlin (13) S C H E D U L E (14) EC-TYPE-EXAMINATION CERTIFICATE PTB 99 ATEX 2139 X (15) Description of equipment The TH-series measuring transducers