Odor Removal Filter. Model Note) 1 8, , , , 3 4. Model/Free Standing Type AMF800. Model/Piping Support Type AMF Port size
|
|
- Griselda Mathews
- 5 years ago
- Views:
Transcription
1 dor emoval ilter Series os fficiently can remove odor in compressed air with an activated carbon element. The unit is designed for use in the area such as a clean room where odors must be avoided. Can remove odor and gas ingredients in compressed air. ctivated carbon element with large filtration area. asy replacement of elements. odular connection is possible with 0C to 0C. (or details, refer to page 4.) 0C to 0C 40C/0C ass (kg) ote) ated flow (l/min ()) 0C 20C 0C 40C 0C , , 8 8, , , ote) at 0.7 a. varies depending on the operating pressure. efer to low Characteristics (page 18) and aximum ir low (page 17). /ree Standing Type ated flow (l/min ()) (2B) S 0 (2B), (B),0 (4B) S 0 (4B),0 (B) S K flange K flange K flange ass (kg) /iping Support Type 1 ated flow (l/min ()) 00 0 (2B) S K flange ass (kg) 40 Specifications luid ax. operating pressure in. operating pressure roof pressure mbient and fluid temperature ominal filtration rating Cleanss at outlet il mist density at outlet lement life 1, , (2B), (B),0 (4B) S K flange 1 Compressed air 1.0 a 0.0 a 1. a to 0 C 0.01 µm (iltration efficiency:.%) ess than 0 particles of 0. µm or larger per cubic foot [ess than particles per liters ()] (The series is required on the inlet side.) ax mg/m () ( ppm) (The series is required on the inlet side.) 1. eplace the element when you smell oil on the outlet side. 2. ven if the deodorization performance is normal, the replacement interval for the element is when the pressure drop reaches 0.1 a or after two years of operation, whichever comes first. W T U B S S 0/80 ccessory (ption) pplicable model Bracket assembly (with 2 mounting screws) 0C 20C 0C 40C 0C B1 -B2 -B -B4 -B B B7 ade to rder (or details, refer to page 2.) Caution Be sure to read before handling. efer to front matters 42 and 4 for Safety nstructions and pages to 8 for ir reparation quipment recautions.
2 Series ow to rder 0C to 0C 0C Body size 0C 20C 0C 40C 0C Thread type Type il c *1 T *1 Conforms to S ption escription il ubber material: luororubber or medium air pressure (1. a) - reversal direction V egreasing wash, * white vase * nly body/housing is degreasing washed. ccessory escription il B Bracket *2 *2 Bracket is included, (but not assembled) Size 1/8 1/4 /8 1/2 /4 1 pplicable body size 0C 20C 0C 40C 0C ptions : ubber material: luororubber luororubber is used for the parts such as -ring and gasket. : or medium air pressure (1. a) Can be used up to 1. a at maximum. : - reversal direction ir flow in the separator is changed to right to left. (ir flow direction of the standard: eft to right.) V: egreasing wash, white vase Body/housing is degreasing washed. The lubrication grease for -ring and gasket is changed to white vase. 1
3 dor emoval ilter Series ow to rder 0/80 0 ree standing type Selection Thread type Type il c T Select a model in accordance with the following procedure taking the inlet pressure and the max. air flow rate into consideration. (xample) nlet pressure: 0. a ax. air flow rate: m /min () 1. btain the intersecting point of inlet pressure and max. air flow rate in the graph. 2. The 0 is obtained when the max. flow is above the intersecting point in the graph. iping support type 0 1 Body size 0 0 Body size Size Size pplicable body size 0 80 Vessel shape ree standing type 0 (2B) S K flange 0 (B) S K flange 40 0 (4B) S K flange 0 0 (B) S K flange 0 to 00 pplicable body size ption escription il - reversal direction ccessory escription il B Bracket Bracket is included, (but not assembled). ote) ake sure to select a model that has the max. flow above the obtained intersecting point. With a model that has the max. flow below the obtained intersecting point, the flow rate will be exceeded, thus leading to a problem such as being unable to satisfy the specifications. ade to rder ( ow to rder and the applicable models are different from those shown on this page. Be sure to refer to ade to rder.) il escription age for details X12 White vase specifications.21 Body size 0 Size aximum ir low Vessel shape iping support type 0 (2B) S K flange 0 (B) S K flange 40 0 (4B) S K flange ax. air flow rate (m /min ()) ote) efer to ow to rder Bowl ssembly on page. 1/01 pplicable body size 1 01 W T U B S S nlet pressure (a) 17
4 Series low Characteristics (epresentative values)/efer to Selection on page 17. (lement initial condition) ote) Compressed air over max. flow in the table below may not meet the specifications of the product. 0C 0C 00/01 ir flow rate (l/min ()) ir flow rate (l/min ()) ir flow rate (m /min ()) 20C C ir flow rate (l/min ()) 0/1 ir flow rate (l/min ()) ir flow rate (m /min ()) 40C ir flow rate (l/min ()) 80 ir flow rate (m /min ()) ir flow rate (l/min ()) ir flow rate (m /min ()) 18
5 dor emoval ilter Series Construction 0C to 0C q 0/80 r w Component arts o. 1 2 escription Body ousing Sight glass aterial luminum die-casted luminum die-casted Tempered glass The 80 is aluminum casted. eplacement arts o. 4 escription lement assembly aterial lass fiber, others lement assembly: With gasket (1 pc.) and -ring (1 pc.) lement assemblies for ade to rder (X12, X) are same as those for standard (see the above table). /0 /00-4 ressure outlet ( side) pplicable model xcept option or option 0C e ote Chrome treated poxy coating on inner surface 20C ressure outlet ( side) 0C ote) efer to ow to rder Bowl ssembly on page. ote) Sight glass is indicated in the figure for easy understanding of component parts. owever, it differs from the actual construction. efer to dimensions on pages 0 to for details. 40C C W T U B S S -1-2 lement Component arts/aterial o. escription 0/00/00 1/ ilter case Cover S-: SS400 SS400 S-: SS400 S-: SS400 rain - eplacement arts o. escription lement 4 Seal Seal asket aterial B B pcs. 271 pcs. 271 pcs pcs. 148 pcs. 148 pcs..112 x.0 x T 1 pc. V#00-1S -0S.112 x.0 x T pcs. -S pcs. -2S.112 x.0 x T pcs. -1S 7 -ring B S B pc. S B pc. S B2401 pcs. S B2401 pcs. S B2401 pcs. 1
6 Series imensions 0C to 0C B S T U Bracket (ccessory) øw C K V aintenance space 0C 20C 0C 1/8, 1/4 1/4, /8 /8, 1/ B C K 8 8 Bracket related dimensions U 7 V W S 4. T
7 dor emoval ilter Series imensions 40C/0C T W T U B K V U Bracket (ccessory) øw B C S S aintenance space 40C 0C 1/2, /4 /4, B 24 C K Bracket related dimensions U V W T.2.2 1
8 Series imensions 0/80 Bracket (ccessory) 2 x port size aintenance space 0 80 B C 1, , K Bracket related dimensions S 4. 2
9 dor emoval ilter Series imensions 1/01 TT W T U abel B 1 01 Connection (lange) 0 (2B) S K flange 0 (2B), (B), 0 (4B) S K flange 400 øb 2 44 øc 0 (B) 00 (12B) /00/00 TT S x ø holes S abel rain Connection (lange) 0 (2B) S K flange 0 (2B), (B), 0 (4B) S K flange 0 (4B), 0 (B) S K flange 00 øb 0 øc 0(8B) nchor bolt 1 x l x l x l00
Odor Removal Filter Series AMF
Odor Removal Filter Series AMF Series AMF Odor Removal Filter efficiently removes odor in compressed air with an activated carbon element. The unit is designed for use in food processing, pharmaceutical,
More informationAME Model. (1) Rated flow (l/min (ANR)) Port size (Nominal size B) Weight (kg)
Super Mist Separator Series AME Series AME separates and absorbs aerosol state fine oil particles in compressed air and changes the oil lubricating compressed air to oilless equivalent air. It should be
More informationAttachments. T Type Interface: (T) M5 X 0.8, 1/ 8, 1/ 4, 3/ 8, 1/ 2 Makes it easy to diverge air out with T type interface
ttachments Piping dapter M X 0.8, / 8, /, / 8, /, /, asy maintenance. Makes it possible to attach and detach equipment without removing piping. -0 Piping adapter To order piping adapter with bracket, the
More informationValve Products ADEX Series Valves
atalog 000-2US X alves X is a miniature low power consumption solenoid valves, ideal for powering small to mid-sized pneumatic actuators used in automation and process applications. X's versatility is
More informationFlow rates to 750 l/min
FP Maximum pressure 0 bar Flow rates to 70 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: AISI L (FP 00-0)
More informationFlow rates to 475 l/min
FMP Maximum pressure 0 bar Flow rates to 7 l/min Technical data PRSSUR FILTR Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: Brass
More informationFlow rates to 750 l/min
FP Maximum pressure 0 bar Flow rates to 70 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: AISI L (FP 0-0)
More informationClean One-touch Fittings
Clean One-touch Fittins //G Series G Series K2 2 K /D / 0 D KD K K 2 G2 S One-touch fittins and tubin for blowin systems and drive air One-touch fittins (for blowin) Collet Seal ED (Fluorine coatin) Special
More informationMaximum pressure 420 bar Flow rate to 152 l/min. 560 bar. 140 l/min. Flow rate l/min FMM 050 1/2 1,50 3/4 1,00. Δp bar 0,50 0,00 FHA 051 1,50 1,00
FMM 00 Maximum pressure 0 bar Flow rate to l/min FHA 0 Maximum pressure 60 bar Flow rate to 0 l/min Technical data FMM 00 Filter housing (Materials) Head: Cast iron (chemical heat treatment) Housing: Steel
More informationFlow rates to 590 l/min
LM 400-40 - 4 Maximum pressure bar Flow rates to 590 l/min Technical data housing (Materials) ead: nodized luminium ousing: nodized luminium Manifolds: Steel - Painted black ypass valve: Steel -way ball
More informationC-Lube Linear Way ML ML MLF
Maintenance ree & U.S. PTTD C-Lube Linear ay Variation of C-Lube Linear ay Shape Length of slide unit Model code C-Lube Linear ay is a linear motion rolling guide, incorporating the C-Lube as a components
More informationFlow rates to 485 l/min
FB Maximum pressure 0 bar Flow rates to 8 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: Steel Check valve:
More informationPilot operated 2 port solenoid valve (general purpose valve) Standard specifications NC (normally closed) type C C. 2 /s) Starting
21/22 Series (general purpose valve) 21/22 Series NC (normally closed) type, NO (normally open) type Port size: Rc1 1/4 to Rc2, 32 to 50 flange iaphragm structure JIS symbol 21: Common specifications Item
More informationWorking pressure. 420 bar. Style T. Style B. Style D Style V Style Z. Style S B B D.I. D.I. D.I. D.I. D.I. D.I.
5 FP SRIS FP Working pressure 40 bar Style S Style Style T Style D Style V Style Z 5 Technical data Filter body (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment)
More informationMetal oil filler and air breather filler caps. Bayonet connection. Reservoir holes. TA46 B (Materials)
Metal oil filler and air Series T 46 4 5 6 4 ayonet connection Ø 46 7 8 46 Reservoir holes T46 (Materials) M5 - Cover: Chrome Plated Steel - Filter element: Impregnated paper Polyurethane 64-6 - Flange:
More informationPolígono Indutrial O Rebullón s/n Mos - España -
FP 5 Polígono Indutrial O Rebullón s/n. 646 - Mos - spaña - rodavigo@rodavigo.com SRIS FP Working pressure 40 bar Style S Style Style T Style D Style V Style Z 5 Polígono Indutrial O Rebullón s/n. 646
More informationHD 049 HD 069 HD 172 HD 319 HD 419 HD 619. Operating pressure up to 8700 psi Nominal flow rate up to gpm us
H i g h P re s s u re i l t e r K i t s H 049 H 069 H 172 H 319 H 419 H 619 Operating pressure up to 8700 psi Nominal flow rate up to 118.9 gpm 40.95-3us e s c r i p t i o n pplication In the high pressure
More informationBore size: 4, 6, 8, 10. Double acting. Double acting Compressed air Withstanding pressure Ambient temperature Port size
*2 2 2 G 2 V2 /V2 V 2 * * U U G U2 2 U 2 G pecifications troke length ore size ylinder switch specifications escriptions pplications utput method ower voltage oad voltage oad current urrent consumption
More informationHow to Order M9BW. Action D Double acting. Load voltage M9NWV M9NW 5 V, 12 V 5 V, 24 V 12 V M9BWV M9BW 12 V 12 V M9NAV M9NA 5 V, 12 V 12 V.
arallel Style Air ripper/-inger Type Series MHS ø1, ø, ø, ø, ø, ø, ø, ø, ø1, ø How to rder Bore size ø1 to ø Number of fingers fingers MHS Bore size 1 1 mm mm mm D MBW Action D Double acting Auto switch
More informationModular Style Air Combination. Assembled by simply tightening the screws
Modular Style Air Combination Series AC Assembled by simply tightening the screws High strength die cast bracket Drain cock for one push drain exhaust Oil needle for easy oil volume adjustments The improved
More informationFlow rates to 485 l/min
FB Maximum pressure 0 bar Flow rates to 8 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: Steel Check valve:
More informationFlow rates to 485 l/min
FB Maximum pressure 0 bar Flow rates to 8 l/min Technical data Filter housing (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel (chemical heat treatment) Bypass valve: Steel Check valve:
More informationTPH Series WALRUS PUMP. Multi-stage Centrifugal Pump. All specifications are subject to change without notice. 014
T Series WLRUS PUMP ll specifications are subject to change without notice. Multistage entrifugal Pump T T pplications The WLRUS T Series is horizontal multistage centrifugal pump, suitable for clean water/liquid
More information40 to 300l/min 14MPa. wpressure adjustment is possible across a wide range, from 0.25 to 14MPa {2.5 to 143kgf/cm 2 }.
ounter alance eatures UR UR VV qhis modular valve is used to control actuator back pressure and for other pressure control valve applications. 0 to 00l/min a w adjustment is possible across a wide range,
More informationø6, ø10, ø15, ø20, ø25, ø32, ø40, ø50, ø63 How to Order Switch rail Nil Standard stroke Refer to page 12 for standard stroke.
Magnetically Coupled Rodless Cylinder: Direct Mount ype Series ø, ø, ø, ø, ø, ø, ø, ø0, ø Direct mount type mm mm mm mm mm mm mm 0 0 mm mm 00 MB Piping type Both sides piping type Centralized piping type
More informationUniversal type Port size AS13 1F-M3. M3 x 0.5 M5 x 0.8 AS23 1F-01 AS23 1F-02 AS33 1F-02 AS33 1F-03 AS43 1F-04 R 1/8 R 1/4 R 1/4 R 3/8 R 1/2
Minimizes installation time and cost Reduces the mounting height and enables compact machinery design. Effective area is larger than the former model. Tube swivels 0 Universal type permits 0 piping swivel.
More informationFluid Cooling Shell & Tube EC Series
Fluid ooling hell & Tube eries 01 O & TL OTTIO erformance otes ugged steel shell construction /" tube size Larger shell diameter than K,.0" maximum diameter High flow capacity & performance High efficiency
More informationThe OCTANORM system components set a new standard in shop design.
O C TA N O R M S H O P S Y S T E M S. A B R I E F I N T R O D U C T I O N. The OCTANORM system components set a new standard in shop design. The wide range of aluminum profiles, the well designed accessories
More informationElement description. Multipass test in compliance ISO Contaminant ISO MTD. A - Microfibre
Style FZ Stainless Steel Pressure filter Technical data element Style In-Line filter: FZ 00-0 FZP 0 FZ 0 FZP 6 FZX 0 Manifold mounting: FZ 0 FZM 0 Max. working pressure: 700 bar Max. working pressure:
More informationUniversal type Port size: M5, Rc1/8, Rc1/4. Max. working. pressure
irect acting port solenoid valve for compressed air, manifold (special purpose valve) Series Universal type Port size: M, Rc/, Rc/ Refer to nding for more details. JIS symbol ommon supply / common exhaust
More informationAIR BREATHER FILTERS. Temperature from -25 to +100 C
IR BRETHER FILTERS The comprehensive series of breather filters makes it possible to meet all market demands. Metal and plastic styles suitable for use on mobile equipment are available. The function of
More informationAIR BREATHER FILTERS. Temperature from -25 C to +100 C
IR RETHER FILTERS The comprehensive series of breather filters makes it possible to meet all market demands. Metal and plastic styles suitable for use on mobile equipment are available. The function of
More informationTPH Series 50Hz Multi-stage Centrifugal Pump
WLRUS PUMP T Series Hz Multistage Centrifugal Pump ll specifications are subject to change without notice. 9 T Product data pplications Page Standard mode Page Operation conditions Page Pump construction
More informationLMP 210. Style B. Style S. Maximum pressure 60 bar F l o w r a t e s t o l / m i n
LMP 0 Style S Style Maximum pressure 60 bar F l o w r a t e s t o 7 0 l / m i n 6 Technical data Filter housing (Materials) Head: luminium Housing: nodised luminium ypass valve: Nylon - Steel Pressure
More informationPRESSURE GAUGE SELECTORS
PRESSURE GUGE SELECORS Gauge isolator valves are designed to protect pressure gauges from pressure shocks when the pressure reading is not required; after each reading setting the selector to the closed
More informationSpecifications. Stroke length. Small direct mounting cylinder MDC2 Series. Port size: M3 (For 4, 6, 8 mm bore) M5 (For 10 mm bore) Descriptions
mall direct mounting cylinder 2 eries ort size: (or,, mm bore) (or mm bore) I symbol ingle acting spring return type ingle acting spring extend type ouble acting VI. pecifications escriptions ore size
More informationLow Profile Slide Table
Low Profile Slide Table Series ø, ø, ø1, ø Low-profile and compact type, air slide table with the construction of guide and cylinder aligned in parallel. Neat appearance Protecting stopper section with
More informationC-Lube Linear Way ML Linear Way L ML LWL
-Lube Linear ay ML Linear ay L MLLL -Lube Maintenance ree Series -Lube Linear ay ML ML long term maintenance free supported! The aquamarine end plate is the symbol of maintenance free. Identification umber
More informationMetal air breather filter
Series S Metal air breather filter 4 H 5 6 7 H H S (Materials) Screw: Galvanised Steel Washer: Teflon Cover: Steel 4 Filter element: Impregnated paper 5 Ring: Galvanised Steel 6 Seal: R 7 Connection: nodised
More informationHigh Power Contacts - Up to 850A
8 Series igh Power Contacts igh Power Contacts - Up to 850 esigned to meet the harshest military requirements where high power and shielding are needed. 3 aluminum shell sizes available Size 19 (450 max);
More informationMPF SERIES RETURN FILTER
MPF SERIES The series of filters MPF has specifically been designed for use on mobile applications, agricultural machinery and power units. The MPF filter range is suitable for flow rates up to 750 l/min.
More informationE 094 E 103 E 143. Tank top mounting Connection up to G1 Nominal flow rate up to 135 l/min e
R e t u r n F i l t e rs E 094 E 103 E 143 Tank top mounting Connection up to G1 Nominal flow rate up to 135 l/min 20.30-5e D e s c r i p t i o n Application In the return line circuits of hydraulic systems.
More informationSERIES FMP. Working pressure. 280 bar. Style D Style V Style Z. Style T. Style B. Style S B B D.I. D.I. D.I. D.I. D.I. D.I.
6 FMP SERIES FMP Working pressure 80 bar Style S Style Style T Style D Style V Style Z 7 Technical data Filter body (Materials) ead: Cast iron (chemical heat treatment) ousing: Cast iron (chemical heat
More informationA B C D E F G H J K L M N P Q
onnectors Vertical ount Vertical ount rinted ircuit oard icro - ilter onnectors. These vertical mount connectors are ideal for flexible circuit or motherboard applications. ey eatures include gold plated
More informationContents. Performance Curves/Technical Data. General Data Performance Range Sectional Drawing TPH 2T TPH 4T TPH 8T TPH 12T TPH 25T TPH 50T
Contents General Data Performance Range Sectional Drawing Performance Curves/Technical Data T T T T T 8T T T T T T T 7 9 T Series Multistage Centrifugal Pump Hz Power:.. kw Head: Up to 7M Flow: Up to L/min
More informationSTAINLESS STEEL FILTER
STINLSS STL FILTR Style FZ Stainless Steel Pressure filter Technical data Style In-Line filter: FZ 00-0 FZP 0 FZ 0 FZP 6 FZX 0 Manifold mounting: FZ 0 FZM 0 Max. working pressure: 700 bar Max. working
More informationAir Cooler Industry AC-LN 1-7 / ACA-LN 2-7 / ACAF-LN 2-7
ir ooler Industry -LN -7 / -LN -7 / F-LN -7 Symbol General The -LN -7 air cooler series can be used in all areas where either oil or water-glycol is to be cooled with air. The coolers with an axial fan
More informationMICRO-AIR SERIES. miniature direct solenoid actuated valves
R-R SERES miniature direct solenoid actuated valves RR i c r o i r d i r e c t s o l e n o i d a c t u a t e d m i n i a t u r e v a l v e s T E D T................................................... 3
More informationP303 Pressure Regulator
P0 Pressure Regulator Minimize Sudden Downstream Load Change Wide Pressure Ranges Integral Monitoring The BelGAS P0 and P0H gas pressure reducing regulators are available with a true monitor regulator,
More informationFluoropolymer Fittings Hyper Fitting
Fluoropolymer Fittings yper Fitting Series Q S Q QR Quadruple seal construction (PT.) efore tightening Nut Tubing support Insert bushing Tubing fter tightening Quadruple sealing parts New PF ourtesy of
More informationHigh Pressure fi lters. FHB series. Maximum working pressure up to 32 MPa (320 bar) - Flow rate up to 485 l/min
High Pressure fi lters FHB series Maximum working pressure up to MPa (0 bar) - Flow rate up to 8 l/min High Pressure fi lters Introduction FILTER SIZING INDEX CALCULATION CORRECTIVE FACTOR Page Introduction
More informationHigh Pressure Ball Valves
High Pressure all Valves 0,, 0, 0,000 psi (0 bar),000 psi (0 bar) 0,000 psi ( bar) ITOK Group ITOK GmbH (Headquarter) Sprendlinger Landstr., 0 Offenbach am Main, Germany Tel.: + 00 ax: + 00 ITOK, Inc.
More informationbarmesapumps.com SELF-PRIMING CENTRIFUGAL TRASH PUMP SPECIFICATIONS Series: SH8-U Suction: 8" Discharge: 8" Spherical solids handling: 3"
SELF-PRIMING CENTRIFUGAL TRASH PUMP Series: SH-U Suction: " Discharge: " Spherical solids handling: 3" SIZE BEARING - PUMP END " x " NPT, lbs., female flange. Open single ball, radial load. LIQUID TEMPERATURE
More informationMRH. Return Filters RETURN FILTER
MRH Return ilters RETUR ILTER Return ilters MRH MRH MPa (0 bar) Port sizes: / / low rates:.00 l/min TECHICAL ATA Max. working pressure: MPa (0 bar) Max. test pressure: MPa ( bar) ursting pressure: 6 MPa
More informationReturn fi lters. FRI series. Maximum pressure up to 20 bar - Flow rate up to 1500 l/min. Return fi lters
Return fi lters FRI series Maximum pressure up to 0 bar - Flow rate up to 500 l/min 9 Return fi lters FILTER SIZING The correct filter sizing have to be based on the variable pressure drop depending by
More information29 188/ way Proportional Flow Control Valve Model 2 FRE 6./.,Series 2X. Ordering Code: Proportional Flow Control Valve 2 FRE 6 2X K4 V *
-way roportional low Control Valve Model RE./.,Series X Size... SI ( bar).... GM ( L/min) R 9 88/.98 R 9 88/.98 Replaces:.9 With pressure compensator for the control of an oil flow independent of pressure
More informationStandardized Chemical Pumps to EN /ISO 2858/ISO 5199 sealless, with magnetic drive. Fields of Application. Designation. Design.
Type series booklet.5/- G2 Magnochem Standardized Chemical Pumps to EN 5/ISO 25/ISO 99 sealless, with magnetic drive Automation products available: PumpExpert Hyamaster hyatronic Fields of Application
More informationDirect-operated 2/2-way solenoid valves Type EV210B
Data sheet Direct-operated 2/2-way solenoid valves Type EV20B EV20B covers a wide range of direct-operated 2/2-way solenoid valves for universal use. EV20B is a very robust valve program with high performance
More information4/3-way servo solenoid directional control valves with electrical position feedback (Lvdt DC/DC) (ruggedized design)
4/3-way servo solenoid directional control valves with electrical position feedback (Lvdt DC/DC) (ruggedized design) Type 4WRL10...25 Sizes (N) 10, 16, 25 Unit series 3 Maximum working pressure P,, 350
More informationPrecision Ball Screw/Spline
58-2E Models BNS-A, BNS, NS-A and NS Seal Outer ring Shim plate Seal Spline nut Seal Collar Shim plate Seal End cap Ball Outer ring Ball screw nut Outer ring Ball Retainer Retainer Outer ring Point of
More informationCKA Series. 3-way jaw thin chuck double acting/single acting. Operational stroke length: 5, 6, 7, 9, 20, 25, 30, 38mm.
G G B A S F J L L H LB N/ S/F Specifications Descriptions Size Cylinder bore size Operating method Working fluid Max. working pressure Min. working pressure Ambient temperature Port size Operational stroke
More informationJDV CONTROL VALVES CO., LTD. JCT/JCTM Series 3/4 Way Trunnion Type Valve Manual
JCT/JCTM Series 3/4 Way Trunnion Type Valve Manual 1. Please read this manual before installation or servicing. 2. Before installing or servicing, please ensure the line pressure has been relieved and
More informationhard anodized aluminum extrusion die cast aluminium acetalic resin nickel plated steel die cast aluminium nitrile rubber stainless steel 3 Version
YR Pneumatic actuators for process automation Pneumatic connections configuration: NMUR interface V/VE Top pinion: V/VE Holes for sensor box connection: V/VE ottom holes for connecting valves: SO Single
More informationMODULAR DUAL LINE VALVE
C H A R A C T E R I S T I C S LUBR ICA NT: O IL / GREAS E ATEX C E EX II2 G D MARKI N G B ASE THRE ADS INL ETS: BSP AND NPT 2 VERSI ON S: NORM AL : ADJUS TABL E DELIVE RY ON TURRET FIX F FIXED DELIV ERY
More informationAPPENDIX 2 RULES FOR BOLTED FLANGE CONNECTIONS WITH RING TYPE GASKETS
APPEDIX RULES FOR BOLTED FLAGE COECTIOS WITH RIG TYPE GASKETS -1 SCOPE GEERAL (a) The rules in Appendix apply specifically to the design of bolted flange connections with gaskets that are entirely within
More information5/2-5/3 SPOOL VALVES MULTIFUNCTION air operated or solenoid air operated with subbase ISO 5599/1 sizes 1, 2 and 3
/ - / SPOOL VALVES MULTIFUNCTION air operated or solenoid air operated with subbase ISO 99/ sizes, and Series Fluids air or inert gas, filtered, lubricated or not Operating pressure Pilot pressure Ambient
More informationSize A DIN EN
Size A DIN EN 70-0 Actuators 0 series DIN EN 70-0 +, + ow and high housing Degree of protection IP6 Wired versions Moulded versions Degree of protection IP67 Contacts Thread Cable outlet Ordering-No. Female
More informationBOLT SIZE Rec.Torque Ft/Lbs. Max Torque Ft/Lbs
BOLT SIZE Rec.Torque Ft/Lbs Max Torque Ft/Lbs "-0 5 "- "- "- 5 "- "-0 () 7 (9) (5) 5 (0) 9 () 5 () 50 () 70 (95) 00 () 5 (70) 5 (70) 5 () Material Add Suffix to P/N P09 THRU P PIPE CLAMPS FOR RIGID STEEL
More informationReturn fi lters. MPI series. Maximum working pressure up to 1 MPa (10 bar) - Flow rate up to 3000 l/min
Return fi lters series Maximum working pressure up to MPa (0 bar) Flow rate up to 000 l/min 0 Return fi lters Introduction FILTER SIZING INDEX CALCULATION CORRECTIVE FACTOR Page Introduction Calculation
More informationSXPCR SECTION 3 CYLINDERS. Page No. Precautions in Installing and Operating Cylinders Caution in Installing Cylinder ISO Standard Cylinder
SCTION CYINS Precautions in Installing and Operating Cylinders Caution in Installing Cylinder ISO Standard Cylinder QC Series ISO Standard Small Size Cylinder ( ~ ) QNC Series ISO2 Standard Square Cylinder
More informationMPT Multifunction Multiport
MP Multifunction Multiport Maximum pressure 8 bar F l o w r a t e s t o 0 0 l / m i n echnical data housing (Materials) ead: luminium Cover: Nylon Bowl: Nylon Pressure Working pressure: 8 bar emperature
More informationK Series SIGHT GLASS FOR CONVENIENT OBSERVATION OF LIQUID FLOW GENERAL
FOR CONVENIENT OBSERVATION OF IQUID FOW K Series SIGHT GASS GENERA K series are sight glasses for observation of various liquids. Different types are available to meet applications and requirements. Cast
More informationHow to order. Load voltage 5 V, 12 V 12 V 5 V, 12 V 12 V 5 V, 12 V 12 V
ISO Standards ir Cylinder: Standard Double cting with End of Stroke Cushioning Series CP ø, ø, ø, ø, ø, ø0, ø With au switch 0 CPS 0 J W CPSD With au switch (uilt-in magnet) L F G C Mounting asic xial
More informationSwirl Diffuser. Type SDW T 2.2/1/B/1. recommended for room heights from approx m
T 2.2/1/B/1 Swirl Diffuser Type SDW recommended for room heights from approx. 2.60... 4.00 m TROX UK Ltd Caxton Way Thetford Norfolk IP24 3SQ Telephone +44(0) 1842 54545 Telefax +44(0) 1842 63051 e-mail
More informationWorking pressure. 320 bar. Style T. Style D. Style S. Style B B B D.I. D.I. D.I. D.I.
8 FB SERIES FB Working pressure 0 bar Style S Style B Style T Style D B B B B D.I. D.I. D.I. D.I. A A A A 8 Technical data Filter body (Materials) ead: Cast iron (chemical heat treatment) ousing: Steel
More informationFeatures: Specification. Model. Acting type. Tube I.D.(mm) Port size. No. of port. Medium Operating pressure range
& F * eries to 3mm ore Features: qual forces on both ends of the piston. Force connection direct, torque safe. agnetic piston standard. % spacesavings. nd caps with 3 air connections and adjustable cushioning.
More informationGear Wheel Flowmeter for viscous liquids Model DZR. (option 3):
Gear Wheel Flowmeter for viscous liquids measuring monitoring analysing DZR easuring range:. -... 3-7 l/min Accuracy: ±.3... ±1% of reading p max : bar t max : 1 C Orocess O connection: G ⅛, G ⅜, G ½,
More informationIdentification The of -Lube Linear Roller Way Super MX is identified by the identification, which consists of model code, size, part code, material symbol preload symbol, classification symbol, interchangeable
More informationAIR PREPARATION. ELECTRONICALLY CONTROLLED PRESSURE REGULATING VALVE (PROPORTIONAL PRESSURE REGULATING VALVE) SERIES control
AIR PREPARATION ELECTRONICALLY CONTROLLED PRESSRE REGLATING ALE (PROPORTIONAL PRESSRE REGLATING ALE) SERIES control Description Abb. Port size Recommended Type Data Sheet No. flow (l/min)* airfit tecno
More informationCheck-Q-meter. Table of contents. Features. Functions. RE 27551/ /10 Replaces: Type FD
Check-Q-meter RE /0.0 /0 Replaces: 09.9 Type FD Nominal size... Series ax. Operating pressure 0 bar ax. Flow 0 l/min K9/ Table of contents Contents Page Features Functions Ordering details Symbols Functional
More informationE8EB-N0C2B E8EB-N0B2B
Slim Sensor CSM DS_E 1 Ideal for Workpiece Position and Original Checking The to 1 kpa model can be used for workpiece position checking. The to 1MPa model is ideal for original pressure checking. Degree
More informationOur policy is one of continued research and development. We therefore reserve the right to
D/99000, D/99000 ompact cylinders on-magnetic and magnetic piston Double acting Ø 12 to 160 mm ight weight ompact design, which is considerably shorter than IS/VDA or FA equivalent. ow friction characteristics
More informationNCK/SCK/FCK Related products Shock absorber NCK/ SCK/FCK
ethod ixed type Adjustable type odel no. N S Low speed type edium speed type High speed type CONTENTS Safety precautions /fixed type (N) 7 /adjustable type (S) 9 /adjustable type () 7 ax. colliding speed
More informationAtlas Copco Air motors. A full range of compact, high performance air motors
Atlas Copco Air motors A full range of compact, high performance air motors ATLAS COPCO AIR MOTORS AIR MOTOR FEATURES AND CHARACTERISTICS Air motors are compact and lightweight. An air motor weighs only
More informationEVOTRON WET ROTOR ELECTRONIC CIRCULATORS TECHNICAL DATA APPLICATIONS ADVANTAGES
TECNICAL DATA EVOTRON Operating range: from, -, m3/h with head of up to metres. Pumped liquid temperature range: from - C to + C. Working pressure: bar ( kpa). Protection class: IP X. Insulation class:
More informationHUSTLER 7' & 8' POOL TABLE ASSEM BLY I NSTRUCTI ONS
HUSTLER 7' & 8' POOL TABLE ASSEM BLY I NSTRUCTI ONS NG2515PB/NG2520PB THANK Y OU! Th a n k yo u f o r p u r ch a si n g t h i s p r o d u ct. We w o r k a r o u n d t h e cl o ck a n d a r o u n d t h
More information98 Series Backpressure Regulators and Relief Valves
9 Series Backpressure Regulators and Relief Valves Bulletin.:9 November 09 W TYPE 9H W TYPE 9LD Figure. Typical 9 Relief Valves Introduction W TYPE 9HD The 9 Series (Figure ) is used for backpressure or
More informationMedium bore size cylinder Double acting/single rod/with switch. SCA2 Series. Bore size: 40, 50, 63, 80, 100 mm. 80 dia. 63 dia. +2.
Meium ore size cyliner oule acting/single ro/with switch eries Bore size:, 5,, 8, 1 mm JI symol C VIBE. pecifications escriptions /2 Bore size mm ia. ia. ctuation Working flui Max. working pressure Ma
More informationSize : Ends : Min Temperature : Max Temperature : Materials : Brass
Size : Ends : Min Temperature : Max Temperature : DN 1/2" to 1 Free nut BSP, male or female - 10 C + 120 C Max Pressure : 20 Bars Specifications : Before or after water meter PTFE packing With free nut
More informationCME / CM-GE / DCME IN-LINE CONSTANT PRESSURE PUMPS. TECHNICAL DATA - CME/CM-GE single flanged
CIRCUTORS ND IN-INE UMS ENERGY EFFICIENCY Circulation pups with in-line ports, suitable for installation in heating and air conditioning, refrigeration, and doestic hot water systes. Extreely versatile
More information1. About Linear Ball Bearing
1. bout inear all MM Specifications M Series Specifications (Standard) M Series Specifications (engten) Ød Ø Ø Ød Ø Ø W W W W INR RING d (m) M4UU 4 2 MUU 1 1.1.. 2.7 21 27 MUU 24 1.1.3 17. 3. 27 41 1 MUU
More informationFree Mount Cylinder Double Acting, Double Rod. ø6, ø10, ø16, ø20, ø25, ø32. How to Order. Action. D Double acting. Standard stroke (mm)
ouble Acting, ouble Rod eries CUW ø, ø, ø1, ø, ø2, ø How to Order CUW With auto switch CUW MBW Built-in magnet ouble rod 1 2 mm mm 1 mm mm 2 mm mm Action ouble acting Number of auto switches Nil 2 pcs.
More informationLO1 SERIES. compact direct solenoid actuated valves
SRS compact direct solenoid actuated valves 0 d i r e c t s o l e n o i d a c t u a t e d v a l v e s T N T................................................... V V O S T O N........................................
More informationSection 8 Column radiators
Section s Description Connections Standard without built-in valve -or- Version with built-in valve Air vent, Drain Fixing and mounting Pressure versions, Fittings, Surface finishes, Special versions eat
More informationSingle Socket and Horizontal Metering
idwest lectric Products Single Socket and Horizontal etering G pproved Single Socket etering G pproved pplication Information idwest s Single Socket etering products are designed for residential use. They
More informationSize : Ends : Min Temperature : Max Temperature : Materials : Brass
Size : Ends : Min Temperature : Max Temperature : DN 1/2" to 2 Free nut BSP, male or female - 10 C + 120 C Max Pressure : 20 Bars up to DN1 1/2, 16 bars over Specifications : Before or after water meter
More informationDMHP3(4)L(T)2A00 Series
STANDARDS Valve body: ASME B16.34 Material certification: EN10204-3.1 MTR Quality assurance: ISO 9001:2008 Steel casting: MSS SP-55 Valve marking: MSS SP-25 Valve test: API 598 Direct mount: ISO 5211 End
More informationGiven: Hot fluid oil, Cold fluid - water (T 1, T 2 ) (t 1, t 2 ) Water
. In a counter flow double pipe eat excanger, oil is cooled fro 85 to 55 by water entering at 5. Te ass flow rate of oil is 9,800 kg/ and specific eat f oil is 000 J/kg K. Te ass flow rate of water is
More informationK 080/12 F 10 K 3-2X/.. Features
RE 2 1/11.02 Replaces: 0.2 Fine throttle Type F Nominal sizes and Series 2X and 3X Maximum operating pressure 2 bar Maximum flow 0 L/min K 00/12 F K 3-2X/.. K 0/ F P 3-3X/.. Overview of contents Contents
More informationSerie B2.1. Flanged ductile iron ball valve. made in. Application fields. Shut-off valves E U R O P E. 18
erie B. Flanged ductile iron ball valve BRanDOni made in E U R O P E Application fields WATER CONdITIONING GA EATING INdUTRY FIRE FIGTING www.brandoni.it erie B. eries B. valves are shut-off ball valves
More information