Planetary Screw Assemblies PLSA

Transcription

1 Planetary Screw Assemblies PLSA

2 Ernst-Sachs-Straße Schweinfurt Tel Fax Catalog "Planetary Screw Assemblies PLSA" R310XX 3308 ( ) Dear Ladies and Gentlemen, The edition replaces the edition. The print version of the edition is from around the end of June 2014 available. Changes / additions: o New sizes Mit freundlichen Grüßen/ best regards / DC-IA / MKT31 Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB Vorstand / Executive Board: Vorstand: Dr. Karl Tragl (Vorsitzender), Vorsitzender / President; Dr. Georg Hanen; Reiner Leipold-Büttner; Dr. Stefan Spindler Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Vorsitzender des Aufsichtsrats: Dr. Siegfried Dais

3

4 2 Planetary Screw Assemblies PLSA R310EN 3308 ( ) Planetary Screw Assemblies PLSA Product Overview 3 Nuts, Screws, Screw Ends, Bearings 3 Planetary Screw Assembly Definition 4 Application Examples 6 Inquiries and Orders 8 Nuts 10 Cylindrical Single Nut ZEM-E-S 10 Flanged Single Nut FEM-E-S 12 Flanged Single Nut, split FDM-E-S 14 Screws 16 Precision Screw PSR 16 Screw Ends 17 Form Form Form Form Form Form Form Bearings 30 Bearing unit LAF 30 Bearing unit LAN 32 Bearing unit LAD 34 Bearing unit LAS 36 Bearing unit FEC-F 38 Slotted Nuts and Housing Nuts 40 Slotted Nuts NMA for Fixed Bearings 40 Technical Data 42 Acceptance Conditions and Tolerance Grades 45 Preload, Rigidity, Friction Torques 48 Mounting 50 End Bearings 53 Design Notes, Mounting Instructions 53 Lubrication 54 Design Calculations 58 End Bearings 64 Design Calculations 64 Design Calculation Service Form 66

5 R310EN 3308 ( ) Planetary Screw Assemblies PLSA 3 Product Overview Nuts, Screws, Screw Ends, Bearings Nuts Cylindrical Single nut ZEM-E-S With backlash or preload Page 10 Flanged Single Nut 12 FEM-E-S With backlash or preload Flanged Single Nut split 14 FDM-E-S With preload Screws Precision-rolled screw PSR Tolerance grades T5, T7, T9 Acceptance conditions 41 Screw end machining Diameter d 0 (mm) Lead P (mm) X 30 X X 39 X X 48 X X 60 X X 75 X X Bearings LAF 26 LAN 28 LAD 30 LAS 32 FEC-F 34

6 4 Planetary Screw Assemblies PLSA R310EN 3308 ( ) Product Overview Planetary Screw Assembly Definition The Planetary Screw Assembly PLSA is an assembly comprising a screw with planets as the rolling elements. It serves to convert rotary motion into linear motion and vice versa. The function principle of a planetary screw assembly is easy to describe, but the range of designs and the requirements for practical applications are many and varied. Planetary Screw Assemblies are designed to transmit high forces and extend the Screw Drives product portfolio at the upper end. Planetary Screw Assemblies are screw drives in which threaded rollers (the planets) are housed in a screw nut, their ends being lodged in discs with holes arranged around a pitch circle so that they rotate parallel to the axis of a special screw, causing the nut to move linearly along the screw. Rexroth Planetary Screw Assemblies offer designers many opportunities to solve transport and positioning tasks in configurations with a driven screw. At Rexroth you will be sure to find exactly the kind of tailor-made products you need for special applications. Structural Design: Both the screw and the nut have an identical multi-start profile with a flank angle of 90. The planets have journals at both ends with are lodged in holes bored in the guide discs. The toothed ends of the planets engage with the internal gear rings of the nut. The planets have single-start threads and crowned flanks that roll without slipping along the nut threads. At each end of the nut there is an internally geared ring which engages with the external gearing on the planets. Guide discs inside the gear rings support the planets journals and ensure that they are correctly spaced. The discs also prevent coarse dirt from working its way into the nut. Versions: Cylindrical Single Nut with backlash or preload (ZEM-E-S) Flanged Single Nut with backlash or preload (FEM-E-S) Flanged Single Nut, split, with preload (FDM-E-S) Precision Screws PSR Bosch Rexroth has a long tradition of manufacturing precision screws. Offered in many sizes and in unmatched quality, these have for years been essential components in our Ball Screw Assemblies product range. We have transferred this tried and trusted manufacturing technology to the screws of our Planetary Screw Assemblies. For users, this results in many advantages, including the following: Identical quality to Rexroth Ball Screw Assemblies Fast delivery Attractive prices thanks to cost-effective manufacturing

7 R310EN 3308 ( ) Planetary Screw Assemblies PLSA 5 Advantages Smooth functioning due to the synchronized movement of the planets Very low noise High linear travel speeds Large number of contact points High load ratings High mechanical efficiency Long life Compact design High power density Effective wiper seals Low lubricant consumption Preloaded units available High positioning accuracy and repeatability

8 6 Planetary Screw Assemblies PLSA R310EN 3308 ( ) Product Overview Application Examples Rexroth Planetary Screw Assemblies are used with great success in many different application areas: Plastic injection molding machines Machine tools Measuring and material testing machines Robots Automotive industry Aerospace industry Automation and handling Food and packaging industries Printing and paper industry Medical technology Cutting operations Forming operations Metals industry Electric press

9 R310EN 3308 ( ) Planetary Screw Assemblies PLSA 7 Friction welding machine

10 8 Planetary Screw Assemblies PLSA R310EN 3308 ( ) Product Overview Inquiries and Orders Nut type The various series versions and forms are shown below. Nuts Cylindrical Single Nut ZEM-E-S With backlash or preload Mounting direction of nut types Definition: The centering diameter on a nut with flange points to the right end of the screw. For cylindrical nuts, the mounting direction can be chosen at will (symmetrical). Centering diameter D 1 Flanged Single Nut FEM-E-S With backlash or preload Symmetrical keyway Flanged Single Nut split FDM-E-S With preload Screw ends, forms for a left or right screw end Basic version With keyway Cut to size only T End mechanically connected with/without keyway Machining of end face Z Centering hole DIN 332-D S Hex socket

11 R310EN 3308 ( ) Planetary Screw Assemblies PLSA 9 Complete PLSA (screw and nut) Planetary Screw Assembly FEM-E-S 20 x 5R 1 0 T7 R 812Z Z Nut type ZEM-E-S Cylindrical Single nut FEM-E-S Flanged Single Nut FDM-E-S Flanged Single Nut, split Size Nominal diameter (mm) Lead (mm) Direction of lead R right Seal Preload Precision Screw 0 none 1 lip-type seal 4 gap-type seal (standard) 0 backlash 1 preload T5, T7, T9 R... precision screw Left screw end Form Option Version Z centering per DIN 332-D S hex socket K none Right screw end see left screw end Overall length L tot (mm) Documentation Lubrication 1 standard (acceptance test report) 2 torque test report is always supplied 6 lead and torque test report 3 lead test report 1 preserved and nut with basic greasing 2 preserved

12 10 Planetary Screw Assemblies PLSA R310EN 3308 ( ) Nuts Cylindrical Single Nut ZEM-E-S With standard seals With backlash max mm or preload For precision screws PSR in tolerance grade T5, T7, T9 (with backlash only) Note: Delivered only as a complete unit. Ordering code PLSA: ZEM-E-S 20 x 5R 4 0 T7 R 822Z Z d 0 x P No. C 1) (kn) C 1) 0 (kn) v 2) max (m/min) 20 x 5R R157C A x 5R R157C x 10R R157C x 5R R157C x 10R R157C x 5R R157C x 10R R157C x 10R R157C x 20R R157C x 10R R157C x 20R R157C ) The load ratings are valid for tolerance grade T5 only. For other tolerance grades, please consider the correction factor f ac on page 43. 2) See page 43 Characteristic speed and page 62 Critical speed. C = dynamic load rating C 0 = static load rating d 0 x P = size d 0 = nominal diameter No. = part number P = screw lead (R = right-hand) S = lube port = maximum linear speed v max

13 R310EN 3308 ( ) Planetary Screw Assemblies PLSA 11 L T 1 B D 1 S L 12 L 11 L 6 d 0 x P (mm) Mass B P9 D 1 g6 L L 5 L 6 L L 12 T S m (kg) 20 x 5R x 5R x 10R x 5R x 10R x 5R x 10R x 10R x 20R x 10R x 20R

14 12 Planetary Screw Assemblies PLSA R310EN 3308 ( ) Nuts Flanged Single Nut FEM-E-S With standard seals With backlash max mm or preload For precision screws PSR in tolerance grade T5, T7, T9 (with backlash only) Note: Delivered only as a complete unit. Ordering code PLSA: FEM-E-S 20 x 5R 4 0 T5 R 812Z Z d 0 x P No. C 1) (kn) C 1) 0 (kn) v 2) max (m/min) 20 x 5R R157C A x 5R R157C x 10R R157C x 5R R157C x 10R R157C x 5R R157C x 10R R157C x 10R R157C x 20R R157C x 10R R157C x 20R R157C ) The load ratings are valid for tolerance grade T5 only. For other tolerance grades, please consider the correction factor f ac on page 43. 2) See page 43 Characteristic speed and page 62 Critical speed. C = dynamic load rating C 0 = static load rating d 0 x P = size d 0 = nominal diameter No. = part number P = screw lead (R = right-hand) S = lube port = maximum linear speed v max

15 R310EN 3308 ( ) Planetary Screw Assemblies PLSA 13 D 7 S 6x60 +0,5 D 1 +0, 1 D 1g6 D 5 BB1 L 3 L 4 L D 6 D 7 S 8x45 BB2 D 6 d 0 x P (mm) Mass D 1 D 5 Hole pattern L D 6 D 7 L 3 L 4 L 5 S m (kg) 20 x 5R BB M x 5R BB M x 10R BB M x 5R BB M x 10R BB M x 5R BB M8 x x 10R BB M8 x x 10R BB M8 x x 20R BB M8 x x 10R BB M8 x x 20R BB M8 x

16 14 Planetary Screw Assemblies PLSA R310EN 3308 ( ) Nuts Flanged Single Nut, split FDM-E-S With standard seals With preload For precision screws PSR in tolerance grade T5, T7 Note: Delivered only as a complete unit. Ordering code PLSA: FDM-E-S 20 x 5R 4 0 T5 R 812Z Z d 0 x P No. C 1) (kn) C 1) 0 (kn) v 2) max (m/min) 20 x 5R R157C A x 5R R157C x 10R R157C x 5R R157C x 10R R157C x 5R R157C x 10R R157C x 10R R157C x 20R R157C ) The load ratings are valid for tolerance grade T5 only. For other tolerance grades, please consider the correction factor f ac on page 43. 2) See page 43 Characteristic speed and page 62 Critical speed. C = dynamic load rating C 0 = static load rating d 0 x P = size d 0 = nominal diameter No. = part number P = screw lead (R = right-hand) S = lube port = maximum linear speed v max

17 R310EN 3308 ( ) Planetary Screw Assemblies PLSA 15 D 7 S 6x60 +0,5 D 1 +0, 1 D 1g6 D 5 L 3 L 4 L D 6 d 0 x P (mm) Mass D 1 D 5 L D 6 D 7 L 3 L 4 L 5 S m (kg) 20 x 5R M x 5R M x 10R M x 5R M x 10R M x 5R M8 x x 10R M8 x x 10R M8 x x 20R M8 x

18 16 Planetary Screw Assemblies PLSA R310EN 3308 ( ) Screws Precision Screw PSR d 2 d 0 d 1 L tot d 1 d 2 d 0 x P (mm) Weight Standard On request (kgcm 2 /m) (kg/m) Length J s 20 x 5R x 5R x 10R x 5R x 10R x 5R x 10R x 10R x 20R x 10R x 20R Precision screws PSR, with mechanically connected screw ends These screws consist of a precision screw part and an unmachined spigot (as the screw journal). The spigot is mechanically connected on one side and is available in different sizes. We have a solution to prevent problems arising from big end bearing diameters (e.g. visible thread grooves or axial contact faces which are too small for the fixed bearing). Please ask. Separate delivery of a screw without end machining and without nut is not planned. d 0 x P = size d 0 = nominal diameter J s = moment of inertia P = screw lead (R = right-hand) d 0 x P (mm) C mechanically connected L S Tolerance grade L tot 0,5 C L R 0,5 x 45 D R (mm) D R 1 L R +2 L tot L S x 5R 30 x 5R/10R x 5R/10R T x 5R/10R x 10R/20R x 10R/20R

19 R310EN 3308 ( ) Planetary Screw Assemblies PLSA 17 Screw Ends Form 002 Option (machining of end face) Z t Z Z 002 d 0 x P S t S S K None Ordering code PLSA: FEM-E-S 20 x 5R 1 0 T7 R 002K K Form Version (mm) d 0 x P Z t Z S t S x 5 M x 5/10 M x 5/10 M x 5/10 M x 10/20 M x 10/20 M d 0 x P = size d 0 = nominal diameter P = lead (R = right-hand) S = hex socket Z = centering hole DIN 332-D

20 18 Planetary Screw Assemblies PLSA R310EN 3308 ( ) Screw Ends Form 312 Option (machining of end face) Z t Z Z Undercut DIN 509 Undercut for retaining ring DIN 471 (3x) L4 L 4 LS 1 S t S S 312 ST 1 S 1 D 1 K None L 5 Application L jl Ordering code PLSA: FEM-E-S 20 x 5R 1 0 T7 R 312Z Z Form Version 1) (mm) D 1 L jl L 4 L 5 S 1 ST1 LS 1 Z t Z S t S d 0 x P j6 H x 5R h M x 5R h M x 5R/10R h M x 5R/10R h M x 5R/10R h M x 5R/10R h M x 10R/20R h M x 10R/20R h M ) The allocation of screw ends to the bearing units is defined by the version. Note: Form 312 with two floating bearings increases the critical speed, see page 62. d 0 x P = size d 0 = nominal diameter no. = part number P = screw lead (R = right-hand) S = hex socket Z = centering hole DIN 332-D

21 R310EN 3308 ( ) Planetary Screw Assemblies PLSA 19 End bearings for screw ends form 312 The bearing unit LAD consists of: 1 bearing (2x required) 2 retaining rings Form Version d 0 x P LAD no x 5R R x 5R R x 5R/10R R x 5R/10R R x 5R/10R R x 5R/10R R x 10R/20R R x 10R/20R R

22 20 Planetary Screw Assemblies PLSA R310EN 3308 ( ) Screw Ends Form 412 Option (machining of end face) Z t Z Z Undercut DIN 509 Undercut for retaining ring DIN 471 S t S S L 4 LS D 1 ST 1 S 1 K None L jl Application Ordering code PLSA: FEM-E-S 20 x 5R 1 0 T7 R 412Z Z Form Version 1) (mm) d 0 x P D 1 L jl L 4 S 1 ST1 LS 1 Z t Z S t S j6 H x 5R h M x 5R h M x 5R/10R h M x 5R/10R h M x 5R/10R h M x 5R/10R h M x 10R/20R h M x 10R/20R h M ) The allocation of screw ends to the bearing units is defined by the version. d 0 x P = size d 0 = nominal diameter no. = part number P = screw lead (R = right-hand) S = hex socket Z = centering hole DIN 332-D

23 R310EN 3308 ( ) Planetary Screw Assemblies PLSA 21 End bearings for screw ends form 412 The bearing unit LAD consists of: 1 bearing 2 retaining rings Form Version d 0 x P LAD no x 5R R x 5R R x 5R/10R R x 5R/10R R x 5R/10R R x 5R/10R R x 10R/20R R x 10R/20R R

24 22 Planetary Screw Assemblies PLSA R310EN 3308 ( ) Screw Ends Form 812 Undercut DIN 509 Thread undercut DIN 76 short Undercut DIN 509 Option (machining of end face) Z t Z Z 812 D 1 G 1 D 2 S t S S b x l x t K None 822 Application L 1 LG 1 L2 L jf Form 822 nächste Doppelseite Ordering code PLSA: FEM-E-S 20 x 5R 1 0 T7 R 812Z Z Form Version 1) (mm) Mp Keyway per DIN 6885 Z S (Nm) d 0 x P L jf D 1 L 1 D 2 L 2 G 1 LG 1 b l t Z t Z S t S h6 h7 P x 5R M15x1 22 M x 5R M15x1 22 M x 5R M20x1 22 M x 10R M20x1 22 M x 5R M20x1 22 M x 10R M20x1 22 M x 5R M30x M x 10R M30x M x 5R M30x M x 10R M30x M x 5R M35x M x 10R M35x M x 5R M35x M x 10R M35x M x 10R M45x M x 20R M45x M x 10R M60x2 31 M x 20R M60x2 31 M ) The allocation of screw ends to the bearing units is defined by the version. d 0 x P = size d 0 = nominal diameter M p = maximum permissible drive torque (precondition: no radial load at drive journal) No. = part number P = screw lead (R = right-hand) S = hex socket Z = centering hole DIN 332-D

25 R310EN 3308 ( ) Planetary Screw Assemblies PLSA 23 End bearings for screw ends form 812 The bearing unit LAF, LAN, LAS consists of: 1 bearing 1 slotted nut LAF LAN LAS Form Version No. d 0 x P LAF LAN LAS x 5R R159A R159A x 5R R159A x 5R R159A R159A x 10R R159A R159A x 5R R159A x 10R R159A x 5R R R x 10R R R x 5R R159A x 10R R159A x 5R R159A R159A x 10R R159A R159A x 5R R159A x 10R R159A x 10R R159A x 20R R159A x 10R R159A x 20R R159A

26 24 Planetary Screw Assemblies PLSA R310EN 3308 ( ) Form 822 Option (machining of end face) Z t Z Z 812 D 1 G 1 D 2 S t S S b x l x t K None 822 Application L 1 LG 1 L2 L jf Ordering code PLSA: FEM-E-S 20 x 5R 1 0 T7 R 822Z Z Form Version 1) (mm) Mp Keyway per DIN 6885 Z S (Nm) d 0 x P L jf D 1 L 1 D 2 L 2 G 1 LG 1 b l t Z t Z S t S h6 h7 P x 5R M15x M x 5R M15x M x 5R M20x M x 10R M20x M x 5R M20x M x 10R M20x M x 5R M30x M x 10R M30x M x 5R M30x M x 10R M30x M x 5R M35x M x 10R M35x M x 5R M35x M x 10R M35x M x 10R M45x M x 20R M45x M x 10R M60x M x 20R M60x M ) The allocation of screw ends to the bearing units is defined by the version. d 0 x P = size d 0 = nominal diameter M p = maximum permissible drive torque (precondition: no radial load at drive journal) No. = part number P = screw lead (R = right-hand) S = hex socket Z = centering hole DIN 332-D

27 R310EN 3308 ( ) Planetary Screw Assemblies PLSA 25 End bearings for screw ends form 822 The bearing unit LAF, LAN, LAS consists of: 1 bearing 1 slotted nut LAF LAN LAS Form Version No. d 0 x P LAF LAN LAS x 5R R159A R159A x 5R R159A x 5R R159A R159A x 10R R159A R159A x 5R R159A x 10R R159A x 5R R R x 10R R R x 5R R159A x 10R R159A x 5R R159A R159A x 10R R159A R159A x 5R R159A x 10R R159A x 10R R159A x 20R R159A x 10R R159A x 20R R159A

28 26 Planetary Screw Assemblies PLSA R310EN 3308 ( ) Screw Ends Form 832 Undercut DIN 509 Option (machining of end face) Z t Z Z mechanically connected Thread undercut DIN 76 short Undercut DIN DF DR D 1 G 1 D 2 S t S S K None 842 b x l x t Application L 1 LG 1 L 2 LF LR L jf Form 842 nächste Doppelseite Ordering code PLSA: FEM-E-S 20 x 5R 1 0 T7 R 832Z Z Form Version 1) (mm) Mp (Nm) Keyway per DIN 6885 Z S d 0 x P L jf D 1 L 1 D 2 L 2 G 1 LG 1 b l t Z t Z S t S h6 h7 P x 5R M20x1 22 M x 5R M25x M x 5R M30x M x 10R M30x M x 5R M35x M x 10R M35x M x 5R M40x M x 10R M40x M x 5R M50x M x 10R M50x M x 5R M50x M x 10R M50x M x 5R M65x2 32 M x 10R M65x2 32 M x 10R M70x2 33 M x 20R M70x2 33 M x 10R M65x2 32 M x 20R M65x2 32 M x 10R M90x2 38 M x 20R M90x2 38 M x 10R M90x2 36 M x 20R M90x2 36 M ) The allocation of screw ends to the bearing units is defined by the version.

29 R310EN 3308 ( ) Planetary Screw Assemblies PLSA 27 End bearings for screw ends form 832 The bearing unit LAS, FEC-F consists of: 1 bearing 1 slotted nut LAS FEC-F Form Version (mm) No. d 0 x P D R L R D F L F LAS FEC-F x 5R R159A x 5R R159B x 5R R159A x 10R R159A x 5R R159B x 10R R159B x 5R R159A x 10R R159A x 5R R159B x 10R R159B x 5R R159A x 10R R159A x 5R R159B x 10R R159B x 10R R159A x 20R R159A x 10R R159B x 20R R159B x 10R R159A x 20R R159A x 10R R159B x 20R R159B d 0 x P = size d 0 = nominal diameter M p = maximum permissible drive torque (precondition: no radial load at drive journal) No. = part number P = screw lead (R = right-hand) S = hex socket Z = centering hole DIN 332-D

30 28 Planetary Screw Assemblies PLSA R310EN 3308 ( ) Screw Ends Form 842 Undercut DIN 509 Option (machining of end face) Z t Z Z mechanically connected Thread undercut DIN 76 short Undercut DIN DF DR D 1 G 1 D 2 S t S S K None 842 b x l x t Application L 1 LG 1 L 2 LF LR L jf Ordering code PLSA: FEM-E-S 20 x 5R 1 0 T7 R 842Z Z Form Version 1) (mm) Mp (Nm) Keyway per DIN 6885 Z S d 0 x P L jf D 1 L 1 D 2 L 2 G 1 LG 1 b l t Z t Z S t S h6 h7 P x 5R M20x M x 5R M25x M x 5R M30x M x 10R M30x M x 5R M35x M x 10R M35x M x 5R M40x M x 10R M40x M x 5R M50x M x 10R M50x M x 5R M50x M x 10R M50x M x 5R M65x M x 10R M65x M x 10R M70x M x 20R M70x M x 10R M65x M x 20R M65x M x 10R M90x M x 20R M90x M x 10R M90x M x 20R M90x M ) The allocation of screw ends to the bearing units is defined by the version.

31 R310EN 3308 ( ) Planetary Screw Assemblies PLSA 29 End bearings for screw ends form 842 The bearing unit LAS, FEC-F consists of: 1 bearing 1 slotted nut LAS FEC-F Form Version (mm) No. d 0 x P D R L R D F L F LAS FEC-F x 5R R159A x 5R R159B x 5R R159A x 10R R159A x 5R R159B x 10R R159B x 5R R159A x 10R R159A x 5R R159B x 10R R159B x 5R R159A x 10R R159A x 5R R159B x 10R R159B x 10R R159A x 20R R159A x 10R R159B x 20R R159B x 10R R159A x 20R R159A x 10R R159B x 20R R159B d 0 x P = size d 0 = nominal diameter M p = maximum permissible drive torque (precondition: no radial load at drive journal) No. = part number P = screw lead (R = right-hand) S = hex socket Z = centering hole DIN 332-D

32 30 Planetary Screw Assemblies PLSA R310EN 3308 ( ) Bearings Bearing unit LAF Fixed bearing with angularcontact thrust ball bearing LGF Double-thrust, screw-down, Series LGF-B- Double-thrust, screw-down, Series LGF-C- The bearing unit consists of: angular-contact thrust ball bearing LGF (not available as a separate part) slotted nut NMA... d 0 x P LAF LGF NMA Weight complete C (N) C 0 (N) M RL (Nm) R fb (N/µm) R kl (Nm/ n G (min 1 ) no. Designation Designation no. (kg) mrad) 20 x 5R R159A LGF-B-1560 NMA 15x1 R x 5R/10R R159A LGF-C-2068 NMA 20x1 R x 5R/10R R LGF-C-3080 NMA 30x1.5 R x 5R/10R R159A LGF-C-3590 NMA 35x1.5 R Suitable for screw ends: Form C = dynamic load rating C 0 = static load rating d 0 x P = size d 0 = nominal diameter M RL = Bearing friction torque with seal n G = Limit speed (grease) no. = part number P = screw lead (R = right-hand) R fb = Rigidity (axial) R kl = Rigidity against tilting

33 R310EN 3308 ( ) Planetary Screw Assemblies PLSA 31 LGF-B- with slotted nut NMA B R 0,6 min. M6 t 0,5 x t D R 0,3 min. d d D 3 J B t d 3 D d d a D a d 3 a a B 1 LGF-C- with slotted nut NMA R 0,6 min. M6 R 0,3 min. 3 B 1 J d 0 x P (mm) Mounting holes d D B B 1 J D a d a Number d 3 t min. max. min. max. (mm) ( ) 20 x 5R x 5R/10R x 5R/10R x 5R/10R

34 32 Planetary Screw Assemblies PLSA R310EN 3308 ( ) Bearings Bearing unit LAN Fixed bearing with angularcontact thrust ball bearing LGN Double-thrust, Series LGN-B- Double-thrust, in pairs, Series LGN-C- The bearing unit consists of: angular-contact thrust ball bearing LGN (not available as a separate part) slotted nut NMA... d 0 x P LAN LGN NMA Weight C C 0 M RL R fb R kl n G no. Designation Designation no. complete (kg) (N) (N) (Nm) (N/µm) (Nm/ mrad) (min 1 ) 20 x 5R R159A LGN-B-1545 NMA 15x1 R x 5R/10R R159A LGN-C-2052 NMA 20x1 R x 5R/10R R LGN -C-3062 NMA 30x1.5 R x 5R/10R R159A LGN-C-3572 NMA 35x1.5 R Suitable for screw ends: Form C = dynamic load rating C 0 = static load rating d 0 x P = size d 0 = nominal diameter M RL = Bearing friction torque with seal n G = Limit speed (grease) no. = part number P = screw lead (R = right-hand) R fb = Rigidity (axial) R kl = Rigidity against tilting

35 R310EN 3308 ( ) Planetary Screw Assemblies PLSA 33 LGN-B- with slotted nut NMA R 0,6 min. B D D Da R 0,3 min. D a d d d a LGN-C- with slotted nut NMA R 0,6 min. R 0,3 min. d a B d 0 x P (mm) d D B D a d a min. max. min. max. 20 x 5R x 5R/10R x 5R/10R x 5R/10R

36 34 Planetary Screw Assemblies PLSA R310EN 3308 ( ) Bearings Bearing unit LAD Floating bearing with deep-groove ball bearing The bearing unit consists of: deep-groove ball bearing per DIN RS retaining ring DIN 471 (2 pcs) d 0 x P LAD Single parts Weight C C 0 Deep-groove ball bearing DIN 625 Retaining ring DIN 471 complete no. Designation no. Designation no. (kg) (N) (N) 20 x 5R R RS R x1 R , R RS R x1 R , x 5R/10R R RS R x1,2 R , R RS R x1,2 R , x 5R/10R R RS R x1,5 R , x 5R/10R R RS R x1,5 R , x 10R/20R R RS R x2 R , x 10R/20R R RS R x2 R , Suitable for screw ends: Form C = dynamic load rating C 0 = static load rating d 0 x P = size d 0 = nominal diameter no. = part number P = screw lead (R = right-hand)

37 R310EN 3308 ( ) Planetary Screw Assemblies PLSA 35 B D d d 0 x P (mm) d D B 20 x 5R x 5R/10R x 5R/10R x 5R/10R x 10R/20R x 10R/20R

38 36 Planetary Screw Assemblies PLSA R310EN 3308 ( ) Bearings Bearing unit LAS Fixed bearing with angularcontact thrust ball bearing LGS Double-thrust Series LAS-E The bearing unit consists of: angular-contact thrust ball bearing LGS per DIN 628 (not available as a separate part) slotted nut NMA... d 0 x P LAS LGS NMA Weight C C 0 n 1) G no. Designation Designation no. complete (kg) (kn) (kn) (min -1 ) 20 x 5R R159A LGS-E-1542 NMA 15x1 R R159A LGS-E-2047 NMA 20x1 R x 5R/10R R159A LGS-E-2052 NMA 20x1 R R159A LGS-E-3072 NMA 30x1.5 R x 5R/10R R159A LGS-E-3072 NMA 30x1.5 R R159A LGS-E-4090 NMA 40x1.5 R x 5R/10R R159A LGS-E-3580 NMA 35x1.5 R R159A LGS-E NMA 50x1.5 R x 10R/20R R159A LGS-E NMA 45x1.5 R R159A LGS-E NMA 70x2 R x 10R/20R R159A LGS-E NMA 60x2 R R159A LGS-E NMA 90x2 R ) Values as a guide for low bearing load, good heat dissipation and suitable lubricating greases with low consistency. Suitable for screw ends: Form C = dynamic load rating C 0 = static load rating d 0 x P = size d 0 = nominal diameter no. = part number n G = rotary speed limit (grease) P = screw lead (R = right-hand)

39 R310EN 3308 ( ) Planetary Screw Assemblies PLSA 37 D d d a D a B d 0 x P (mm) d D B D a d a min. max. min. max. 20 x 5R x 5R/10R x 5R/10R x 5R/10R x 10R/20R x 10R/20R

40 38 Planetary Screw Assemblies PLSA R310EN 3308 ( ) Bearings Bearing unit FEC-F Fixed bearing with angularcontact thrust ball bearing LGS The bearing unit consists of: Precision steel flanged housing angular-contact thrust ball bearing LGS slotted nut NMB The slotted nut is delivered unmounted d 0 x P FEC-F LGS NMB Weight C C 0 M 1) RL R fb R kl n 2) G no. Designation Designation M A complete (Nm) (kg) (kn) (kn) (Nm) (N/µm) (Nm/mrad) (min 1 ) 20 x 5R R159B LGS-E-2562 NMB 25x1, x 5R/10R R159B LGS-E-3580 NMB 35x1, x 5R/10R R159B LGS-E NMB 50x1, x 5R/10R R159B LGS-E NMB 65x x 10R/20R R159B LGS-E NMB 65x x 10R/20R R159B LGS-E NMB 90x ) Measured at 50 min 1 2) Values as a guide for low bearing load, good heat dissipation and suitable lubricating greases with low consistency. Values apply for bearing configuration Bearing configurations or are possible. Please ask. Suitable for screw ends: Form C = dynamic load rating C 0 = static load rating d 0 x P = size d 0 = nominal diameter no. = part number P = screw lead (R = right-hand) M RL = bearing friction torque with sealing disk R fb = stiffness (axial) R kl = tilting rigidity = rotary speed limit (grease) n G

41 R310EN 3308 ( ) Planetary Screw Assemblies PLSA D 10 D 3 d D D 1 4x60 L 9 L 4 L 3 L 2 B D 6 D 5 D 7 d 0 x P (mm) d D B L2 L3 L4 L9 D1 D3 D5 D6 D7 D10 h7 20 x 5R x 5R/10R x 5R/10R x 5R/10R x 10R/20R x 10R/20R

42 40 Planetary Screw Assemblies PLSA R310EN 3308 ( ) Slotted Nuts and Housing Nuts Slotted Nuts NMA for Fixed Bearings Slotted nut NMA for maximum vibratory loads 0,005 A C B f e m g A d D Designation No. (mm) M A F ab M AG Weight d D B c m e f g (Nm) (kn) (Nm) (g) NMA 15x1 R M15x M NMA 17x1 R M17x M NMA 20x1 R M20x M NMA 25x1,5 R M25x M NMA 30x1,5 R M30x M NMA 35x1,5 R M35x M NMA 40x1,5 R M40x M NMA 45x1,5 R M45x M NMA 50x1,5 R M50x M NMA 60x2 R M60x M NMA 70x2 R M70x M NMA 90x2 R M90x M M A = tightening torque for slotted nut F ab = axial breaking load of slotted nut M AG = tightening torque for set screw Nr. = part number

43 R310EN 3308 ( ) Planetary Screw Assemblies PLSA 41 Housing nut GWR for angular-contact thrust ball bearing LGN for cylindrical single nut ZEM-E-S Note: Use a threadlocker (e.g. Loctite 638) to secure against loosening. 0,01 A A D d B g f e Designation No. (mm) Weight D d B e f g (g) GWR 18x1 R M18x GWR 23x1 R M23x GWR 26x1.5 R M26x GWR 30x1.5 R M30x GWR 36x1.5 R M36x GWR 40x1.5 R M40x GWR 45x1.5 R M45x GWR 50x1.5 R M50x GWR 55x1.5 R M55x GWR 58x1.5 R M58x GWR 60x1 R M60x GWR 62x1.5 R M62x GWR 65x1.5 R M65x GWR 70x1.5 R M70x GWR 78x2 R M78x GWR 92x2 R M92x GWR 112x2 R M112x

44 42 Planetary Screw Assemblies PLSA R310EN 3308 ( ) Technical Data Technical Notes The degree of efficiency determines the torque required to convert the rotary motion into linear motion. 120 Due to their high mechanical efficiency, PLSAs are in principle not self-locking. cc Safety information For installation, customers should check whether separate protection against falling loads, e.g. a safety nut, is required. Please consult us. Efficiency (%) Precision Ball Screw Assembly PLSA 20 Acme screw Lead angle ( ) Advantages over the Acme screw drive The mechanical efficiency of an Acme screw drive is a maximum 50%, whereas a PLSA can reach a mechanical efficiency of up to 90%. Higher life expectancy due to negligible wear during operation Less drive power required No stick-slip effect More precise positioning Higher travel speed Less heat-up Selection criteria for PLSAs (extract) The following factors should be considered when selecting the PLSA for a given application: degree of accuracy required (lead deviation) in-service load conditions service life critical speed buckling load rigidity/permissible clearance or desired preload characteristic speed (max. permissible linear speed) cc Note Radial and eccentric forces relative to the screw must be avoided, as they can affect the PLSA s performance and shorten its life. Where special conditions of use are involved, please ask. The following points should be taken into consideration when selecting a PLSA that is to be both cost-efficient and optimally designed: The calculation of the service life should be based on average loads and average speeds, not on maximum values. In order for us to provide you with a customized solution, installation drawings or sketches of the nut environment should be enclosed with.

45 R310EN 3308 ( ) Planetary Screw Assemblies PLSA 43 Static load rating C 0 The static load rating is an axial, concentrically acting force that induces a permanent deformation of x the rolling element diameter. Dynamic load rating C The dynamic load rating is an axial, concentrically acting force of constant magnitude and direction under which 90% of a sufficiently large number of identical PLSAs can achieve a nominal service life of one million revolutions. Correction factor for tolerance grades The static load rating C 0 and the dynamic load rating C must be multiplied by the correction factor f ac as appropriate for the specific tolerance grade of the screw. Tolerance grade T f ac 1 0,9 0,8 Service life The nominal life is expressed by the number of revolutions (or number of operating hours at constant speed) that will be attained or exceeded by 90% of a representative sample of identical PLSA s before the first signs of material fatigue become evident. The nominal life is designated as L or L h, depending on whether it is specified in revolutions or hours. The nominal life calculation is based on optimal installation and environmental conditions. The service life may be shortened, for example, if the lubrication is affected by exposure to process media. Critical speed and buckling load The critical speed and buckling load can be checked using the corresponding charts. For precise calculations see formula 12 15, in Design Calculations. Characteristic speed d 0 n Material, hardness Rexroth PLSAs can be operated at very high speeds due to their structural design. Characteristic speeds of up to 150,000 are possible depending on the nut type. The Characteristic speeds can be exceeded for a short-term, please consult us. d 0 n d 0 = nominal diameter (mm) n = speed (min 1 ) The theoretically possible maximum linear speed v max (m/min) is specified on the page featuring the relevant nut. Actually attainable speeds are heavily dependent among other factors on preload and duty cycle. They are gen-erally restricted by the critical speed. (See Design Calculations ). PLSAs are made of high-quality, heat-treatable steel, carbon chrome alloy steels or case-hardened steels. The screw and nut raceways have a minimum Rockwell hardness of HRC 58. The screw ends are not hardened.

46 44 Planetary Screw Assemblies PLSA R310EN 3308 ( ) Technical Data Technical Notes Sealing PLSAs are precision assemblies that require protection against contamination. Flat protective covers, bellows type dust boots or other enclosures are particularly suitable for this purpose. As there are some applications in which these methods do not provide sufficient protection, we have developed an additional gapless lip-type seal which ensures an optimal sealing effect and maintains high efficiency due to the low friction level. Our PLSAs can therefore be supplied with lip-type seals as an option. At the customer s request, the seals can be omitted entirely. To ensure that seals retain their functionality, dirt must be removed at regular intervals. Short stroke Short stroke applications = stroke nut length Lubrication: During a short stroke, the planets do not make a real turn. It is therefore impossible for an adequate lubricating film to form. This may result in premature wear. To avoid this, it is sufficient to perform longer strokes at regular intervals with simultaneous relubrication as lubricating strokes. Load rating: Short stroke applications will increase the number of times a rolling load passes over each point within the load zone. This reduces the load rating. Please consult us. Permissible operating temperature PLSAs are suitable for continuous operation at temperatures up to 80 C with temporary peaks of 100 C (measurements taken on the outer shell of the nut). Permissible operating temperatures: 10 C T operating 80 C Permissible bearing temperature: 15 C T bearing 80 C Bearings When calculating the life expectancy of the overall system, the end bearings must be considered separately.

47 R310EN 3308 ( ) Planetary Screw Assemblies PLSA 45 Acceptance Conditions and Tolerance Grades Permissible travel deviation in accordance with DIN ISO Symbol definitions (excerpt): l 0 = nominal travel l 1 = thread length l 0 = travel deviation l u = useful travel l e = excess travel (the closer tolerances for travel and hardness do not apply here) c = travel compensation (target travel deviation) (standard: c = 0) e p = tolerance mean actual travel deviation ν 300p = permissible travel deviation within 300 mm travel ν 2πp = permissible travel deviation within one revolution T PLSA with precision screw PSR l e + 0 l l 1 l u 300 ν300p l e l 0 e p e p c = 0 Useful travel l u tolerance mean actual travel deviation e p (mm) Tolerance grade > e p l u p For precision screws PSR the following values apply in all cases: ν 300p (mm) Tolerance grade Non-usable length l' e (Excess travel) d 0 (mm) (mm) 20, l e Minimum number of measurements within 300 mm (measuring interval) and excess travel to be taken into consideration. Lead P Minimum number of measurements for tolerance grade (mm)

48 46 Planetary Screw Assemblies PLSA R310EN 3308 ( ) Technical Data Acceptance Conditions and Tolerance Grades Run-outs and location deviations based on DIN ISO Radial run-out t 5 of the outer diameter of the screw over the length l 5 used to determine the straightness in relation to AA. A l 5 l 5 l 5 2 d 0 l 1 d 0 t 5p AA' A' 2 d 0 d 0 l 5 t 5pmax in µm for l 5 tolerance grade > p t A l 5 l 5 5pmax t A l 1 /d 0 t 5pmax in µm for l 1 4l 5 tolerance grade > Radial run-out t 6 of the bearing diameter in relation to AA for l 6 l. Table value t 6p applies when I 6 reference length I. Where l 6 > l then t 6a t 6p l 6l t 6p AA' A 2 d 0 l 6 A' d 0 d 0 Reference t 6p in µm for l 6 l length l tolerance grade > Coaxial deviation t 7 of the journal diameter of the screw shaft in relation to the bearing diameter for l 7 > l. Table value t 7p applies when I 7 reference length I. Where l 7 > l then t 7a t 7p l 7l l 7 C t 7p C Bearing seat d 0 d 0 Reference t 7p in µm for l 7 l length l tolerance grade > d 0 = nominal diameter

49 R310EN 3308 ( ) Planetary Screw Assemblies PLSA 47 Axial run-out t 8 of the shaft (bearing) face of the screw shaft in relation to the bearing diameter. t 8p C d F d 0 d 0 t 8p in µm for tolerance grade > C Bearing seat Axial run-out t 9 of the nut location face in relation to A and A (for preloaded nuts only). A D 5 2 d 0 t 9p AA' A' 2 d 0 d 0F Flange diameter D 5 t 9p in µm for tolerance grade > Radial run-out t 10 of the outer diameter D 1 of the nut in relation to A and A (for preloaded and rotating nuts only). Fix screw against rotation before carrying out the measurement. A 2 d 0 D 1 t 10p AA' Fixed A' 2 d 0 d 0 Outer diameter D 1 t 10p in µm for tolerance grade >

50 48 Planetary Screw Assemblies PLSA R310EN 3308 ( ) Technical Data Preload, Rigidity, Friction Torques Nut system preload In addition to single nuts with reduced backlash, Rexroth supplies preloaded nut systems. Axial movement (deflection) Single nut with backlash Preloaded and adjustablepreload nut systems Axial load With preloaded nut systems, the deformation due to load cycling is significantly less than that of systems without preload. Preloaded nut systems should therefore be used in applications requiring a high degree of rigidity. The preload of the PLSA will decrease over time as a function of the load the operating hours. The screw is typically far less rigid than the nut unit (for details see Overall axial rigidity... ). Rigidity The rigidity of a PLSA is also influenced by all adjoining parts such as bearings, housing bores, nut housings etc. Overall axial rigidity R bs of the PLSA The overall axial rigidity R bs is comprised of the component rigidity of the bearing R fb, the screw R S and the nut unit R nu = R bs R fb R S R nu Rigidity of the bearing R fb Rigidity of the screw R S The rigidity of the bearings corresponds to the values found in the bearing manufacturer s catalog. See the corresponding tables in this catalog for rigidity values of the bearings offered by Rexroth. The rigidity of the screw R S depends on the type of bearing used. See the corresponding tables for rigidity values. Note: Please note that in most cases the rigidity R S of the screw will be significantly lower than the rigidity R nu of the nut unit.

51 R310EN 3308 ( ) Planetary Screw Assemblies PLSA 49 1 PLSA shaft is fixed at one end. 2 PLSA shaft is fixed at both ends. R S /R S1 /R S2 =rigidity of the screw (N/mm) d 0 = nominal diameter (mm) l S = distance between bearing and bearing (mm) l S2 = distance between bearing and nut (mm) l S1 S S2 2 l S2 l S R S2 (d 0 ) 2 S2 S S S2 18 The lowest screw rigidity R S2min occurs at the center of the screw (l S2 = l S /2) and thus equals: (d 0 ) 2 (d R 165 (N/ m) 0 ) (N/µm) S1 R S1 S2min S Rigidity in the area of the nut unit R nu See the corresponding tables for rigidity values. Preload and rigidity d 0 x P Backlash of single nut Preload of single nut FEM / ZEM FDM FEM / ZEM standard (mm) R nu (N/µm) T pr0 (Nm) T pr0 (Nm) T pr0 (Nm) T pr0 (Nm) R S N m ( max. min. max. min. max. µm ) 20 x 5 0, ,29 0,60 0,29 0, x ,57 1,13 0,57 1, x ,57 1,13 0,57 1, x ,88 1,75 0,88 1, x ,88 1,75 0,88 1, x ,24 2,47 1,24 2, x ,24 2,47 1,24 2, x ,79 3,58 1,79 3, x ,79 3,58 1,79 3, x ,61 5, x ,61 5, Dynamic drag torque of the seals Seal torque in the nuts d 0 x P = Size R S = rigidity of the screw R nu = rigidity of the nut unit T RD = dynamic drag torque of the 2 seals T pr0 = dynamic drag torque without seals T 0 = overall dynamic drag torque T 0 = T pr0 + T RD d 0 x P Dynamic drag torque T RD approx. (Nm) Lip-type seal Gap-type seal 20 x x 5/ x 5/ x 5/ x 10/ x 10/ The values given for dynamic drag torque are proven practical indicators for the nut preloading.

52 50 Planetary Screw Assemblies PLSA R310EN 3308 ( ) Mounting Mounting Condition as delivered Rexroth PLSAs are normally delivered with an initial supply of grease. Relubrication is possible, and cartridges and cans of this grease are available. If another lubricant is used, you will need to check that it is compatible with the initial supply. For special cases, the PLSAs can also be supplied with only a preservative coating. This can be indicated by choosing the appropriate option number in the ordering code. cc Important The selected lubricant must be in the nut before the machine is started. cc Note In systems with gap-type seal (Option 4), the user must apply the stroke-dependent amount of grease in addition. (See section on Lubrication). Cleaning Various cleaning agents can be used to degrease and wash the assembly: aqueous cleaning agents organic cleaning agents cc Important Immediately after cleaning, thoroughly dry all parts, then apply a preservative coating or anti-corrosion oil. In all cases, take care to observe the appropriate legal regulations (environmental protection, health and safety at work, etc.) as well as the specifications for the cleaning agent (e.g. handling). Storage PLSAs are high-quality systems that must be treated with due care. In order to prevent damage and contamination, the elements should not be removed from the protective wrapping until immediately before installation. Once they have been removed from the packaging, they must be set down on V-shaped cradles. Installation in the machine It is not normally necessary to remove the preservative coating before installation. If the PLSA is contaminated it must first be cleaned (see Cleaning ) and re-oiled Push the nut unit into the mounting bore, taking care to avoid any impact force or misalignment. Tighten the mounting screws using a torque wrench if necessary. Maximum tightening torque for the steel/steel material pairing (R m 370 N/mm 2 ), see table. For the steel/aluminum and alumi-num/aluminum material pairings (R m 280 N/mm 2 ) the maximum tightening torques specified in the follow table apply. When driving screws into aluminum, the length of thread engagement should be at least 1.5 times the screw diameter.

53 R310EN 3308 ( ) Planetary Screw Assemblies PLSA 51 Tightening torques for fastening screws according to VDI 2230 for m G = m K = Steel/aluminum and aluminum/ aluminum material pairings Screw diameter (mm) Tightening torque (Nm) Strength class per DIN ISO 898: M M M M M M M M M M M Steel/steel material pairing Screw Tightening torque (Nm) diameter Strength class (mm) per DIN ISO 898: M M M M M M M M M M M Alignment of the PLSA in the machine Self-aligning contact pads for easy alignment of the PLSA are available from Rexroth. (pads fitting for standard gauge). Two pads of different lengths are available, which can be used depending on the screw lead: Part number R : length 33 mm Part number R : length 50 mm