Figure 2.1 The Inclined Plane
|
|
- Alaina McCoy
- 5 years ago
- Views:
Transcription
1 PHYS-101 LAB-02 One and Two Dimensional Motion 1. Objectives The objectives of this experiment are: to measure the acceleration due to gravity using one-dimensional motion, i.e. the motion of an object dropped from rest in free fall. to determine the independence on motion along two perpendicular axes in projectile motion. 2. Theory A. ) One-Dimensional Motion ( Free Fall ) Prior to the advent of high speed data collection techniques such as ultrasonic transducers and high speed digital cameras, a scientist would have to be clever to be able to measure the acceleration due to gravity. We take it for granted that the acceleration due to gravity of an object in free fall is approximately a y = g 9.8 m/ s 2 and is constant near the surface of the earth, but it is not as easy to measure as you would think. Take a baseball and drop it from shoulder height. Try to accurately measure the time it takes to reach the ground. It is pretty hard objective to accomplish. If only we could slow down the motion. Galileo was very interested in the motion of free falling objects. He thought of an ingenious method for slowing down the the motion of a body under the influence of gravity. He used an incline plane. Figure 2.1 The Inclined Plane Here the sum of the forces in the y direction ( taken perpendicular to the plane ) is zero, so the acceleration in that direction is also zero. The sum of the force in the x direction ( taken parallel to the plane and down the plane ) is equal to the mass times the acceleration in the x direction. N m a x = F x i=0 i m a x =mg sin a x =g sin 1
2 Galileo could slow down the motion enough to get accurate measurement of the time. Releasing the object from rest and measuring the distance traveled Galileo could find the acceleration, and use then value to compute the acceleration due to gravity. 1 x= x o v x t a x t 2 2 a x =g sin 1 2 x= x o v x t a x t a 2 g= x sin 2 x a x= 2 t Now using high speed digital cameras we can view the motion without the use of an inclined plane. You will drop a ball from about meters and record the motion using the digital camera. Software will be used to calculate the y-position of the falling object as the frames are stepped through. You will use an object that has negligible, but not zero, drag forces and will not be effected by air resistance. If the acceleration due to gravity is indeed a constant, plotting y-position versus time should yield a parabola. Fitting a second order polynomial will provide you with the value of the acceleration due to gravity. You can also find the approximate y-component of velocity of the object. If the acceleration due to gravity is indeed a constant, plotting y-component of velocity versus time should yield a straight line. If you fit a straight line to this data, the slope will yield the acceleration due to gravity. o o Y Position versus Time Y Comp of Velocity versus Time v(m/s) y(m) t(s) t(s) Figure 2.2 Position Versus Time Figure 2.3 Position Versus Time v y =v o g t 1 2 y= y o v y t g t 2 B. ) Two-Dimensional Motion ( Projectile Motion ) If the same object is launched at an angle above the horizontal, the resulting two-dimensional motion can be resolved into two independent motions. You will take a movie of a projectile being launched at an angle above the horizontal. You will look at the motion along the x axis and along the y axis. You will complete the same analysis as you did for free fall except know you will consider the y direction and the x direction. You will use this analysis to verify the projectile motion equations presented in lecture. y 2 a y = g = 9.8 m/ s v y =v o g t 1 2 y= y o v o t g t 2 y y 2 a x =0 v x =v o =constant x= x o v o t x x v o =v o cos v o =v o sin x y
3 C. ) A word about Numerical Differentiation In this experiment you will estimate the instantaneous velocity by using numerical differentiation. In essence, you will take the average velocity between two points using as small a time step as possible. v= dx x x = lim as t gets as small as possible. dt t 0 t t Numerical differentiation is skill. If the velocity is constant, getting the numerical derivation is relatively easy and the time step can be rather large. If the object is accelerating, care must be taken. Consider the plot of position versus time for an object in Figure 2.4. Figure 2.4 Position versus Time for an Object Experiencing Acceleration The velocity at Point i should be the slope of the line tangent to point i. In order to compute the slope, you will need two points. Your first thought might be to use points i and i+1, but looking at Figure 2.5 shows that this might not be a good idea. You would fine the same problem using Point i and i+1, as shown in Figure 2.6. A better choice might be i-1 and i+1, see Figure
4 Figure 2.5 Position versus Time Figure 2.6 Position versus Time Figure 2.6 Position versus Time It looks like the best method maybe the one in Figure 2.7. x i 1 x i 1 v i t i 1 t i 1 If time permits, take a look at all three methods. Your spreadsheet does all the work! 4
5 3. Procedure In this experiment you will take video of an object in free fall and an object in projectile motion. You will use these videos to analyze the motion of the object in free fall and the object exhibiting projectile Figure 3.1 The VideoPoint Icons motion. This will involve two pieces of software. As the name suggests, VideoPoint Capture is the software for controlling the video camera and capturing the video. VideoPoint Physics Fundamentals is the software that will be used to analyze the data. The analysis that the software provides is a list of x and y coordinates as a function of time. This position versus time data will be exported to a spreadsheet, where the velocity and acceleration as a function of time will be computed. Capturing the Video Clip: 1. Open the VideoPoint Capture Software by clicking on the icon on the desktop. The icons are shown in Figure 3.1. The opening screen should resemble Figure 3.2. Figure 3.2 VideoPoint Capture Opening Screen 5
6 2. Next, turn on the camera. Use the menu on the camera to select a shutter speed of 1/250 seconds. 3. Click on the Capture Button. This should bring up a screen which resembles Figure 3.3. You should the video input from the camera. If you do not see any video input but instead see a black screen, click on the settings button. A pop-up window will appear ( Figure 3.4 ) with a drop down menu will appear which lists the cameras attached to the computer along with other camera settings. Choose the proper camera and press the OK button. ( If you still do not see any video, make sure the camera is on and press record, then press stop, and then press the back arrow. ) Figure 3.3 VideoPoint Capture Normal Operation Figure 3.4 Selecting the camera and settings. 4. Data can now be collected by capturing a video. One person should hold ( or mount to a wall ) a meter stick. Recording the data is started by hitting the Record button. When recording, the Record button is grayed out. A ball is then dropped from a height of about two meters. Hit the Stop button after the ball hits the ground. The film may now be edited with the VideoPoint Capture Software. 6
7 Figure 3.5 VideoPoint Capture collecting data. Notice that the Record button is grayed out. 5. Once the Stop button is pressed, editing may begin. Save the video clip as a.mov movie file using the File drop down menu at the top of the screen. Editing the Video Clip: 6. Data analysis will be easier if the length of the video is cropped to include only the frames of interest. After the stop button, the editing screen will appear. The editing screen contains a set of controls much like the set of controls on any dvd player. There are buttons for play, fast forward, fast rewind, step forward, and step backward. When the play button is pressed, the video will begin to play, and the button is transformed into a stop button. These controls are shown in Figure 3.6. There is also a slidebar with a black diamond on the top. Sliding this black diamond along the slide bar advances/recedes the video clip. Use these controls to review the film clip to decide where to crop the video clip. There are also two white triangles. These triangles are to mark the start and end of the frames that are to be analyzed. 7
8 Black Diamond White Triangle - Start Figure 3.6 VideoPoint Capture Editing Screen White Triangle - Finish 7. After reviewing the video clip, use the white triangles to mark the start and finish of the frames that will be analyzed. Make sure that the start is marked after the ball has cleared the hand of the person dropping the ball. Deleting approximately five frames after the ball is released is recommended. Once you have chosen the start and finish, clip on the Confirm Edit button. This will crop the video clip to the chosen length. ( See Figure 3.7 ) 8. After checking that the film clip has the needed frames, save the film clip. Figure 3.7 VideoPoint Capture Editing Screen 8
9 Analyzing the Video Clip: 9. Open the VideoPoint Physics Fundamentals Software. Using the File drop down menu, load the video clip movie file saved in step 8. Figure 3.8 VideoPoint Physics Fundamentals Preview Screen 10. The first screen can be used to view the video clip. This screen is labeled as the Preview Screen in the tabs which run along the top of the screen. These tabs may be used to navigate through the program. As each screen progresses, a hint will appear in a pop up window. These hints can be closed using the X button in the upper, right hand corner of the pop up window. Once the clip has been viewed, advance to the next screen using the forward arrow button. 11. This screen is the calibrate screen. Here a yellow calibration tool can be found. Move one end of the calibration tool to meet with one end of the meter street ( or some other known standard ) and move the other end of the yellow calibration tool to meet with the other end of the meter stick. Enter the length of the object between the jaws of the calibration tool, one meter if the meter stick is used. Advance to the next screen. 9
10 Figure 3.9 VideoPoint Physics Fundamentals Calibration Screen 12. This is the Set Up Analysis frame. Set the origin using Move Origin x and y position boxes. The axis may also be rotated and the t = 0.0 seconds frame may also be set. Go to the next frame. Figure 3.10 VideoPoint Physics Fundamentals Set Up Analysis Screen 13. This is the Collect Data screen. Here the mouse can be used to select data points on the screen while in the Data Collection Mode. As the data point is selected, the video clip advances to the next frame. The set of data points may be completely deleted by selecting the data set name ( ex. Points S1 ) and pressing the Delete button. A new set may be started with the Add New Points drop down menu and hitting the OK button. Point locations may be moved while in the Point Editing Mode. When in the Point Editing Mode, the mouse can grab the point and drag it to a new position. Once the points have been selected move to the next screen. 10
11 Point Editing Mode Data Collection Mode Figure 3.10 VideoPoint Physics Fundamentals Collect Data Screen 14. Export the data set into a spreadsheet using the file drop down menu. 11
12 Analyzing the Data Collected: 15. Open the spreadsheet containing the data collected. 16. Plot the y position versus time data. Add a trend line using a second order polynomial fit. Show the equation of the line and the R-squared valued. 17. Calculate the y component of the velocity using the equation: vy= i y i 1 y i 1 y i 1 y i 1 = t i 1 t i 1 2 t 18. Plot the y component of the velocity versus time. Add a trend line with a linear fit. Show the equation of the line and the R-squared value. 19. Calculate the y component of the acceleration using the equation: ay= i v y v y i 1 i 1 t i 1 t i 1 = v y v y i 1 i 1 2 t 20. Plot the y component of the acceleration versus time. Add a trend line with a linear fit. Show the equation of the line and the R-squared value. Projectile Motion: 21. Repeat the above procedure for projectile motion. Use the Pasco projectile launcher. Use an angle of 30 degrees and use the second step in the launching mechanism. 22. Open the spreadsheet containing the data collected. 23. Plot the y position versus time data. Add a trend line using a second order polynomial fit. Show the equation of the line and the R-squared valued. 24. Calculate the y component of the velocity using the equation: vy= i y i 1 y i 1 y i 1 y i 1 = t i 1 t i 1 2 t 25. Plot the y component of the velocity versus time. Add a trend line with a linear fit. Show the equation of the line and the R-squared value. 26. Calculate the y component of the acceleration using the equation: ay= i v y v y i 1 i 1 t i 1 t i 1 = v y v y i 1 i 1 2 t 27. Plot the y component of the acceleration versus time. Add a trend line with a linear fit. Show the equation of the line and the R-squared value. 28. Plot the x position versus time data. Add a trend line using a linear fit. Show the equation of the line and the R-squared valued. 12
13 29. Calculate the x component of the velocity using the equation: vx= i x i 1 xi 1 x i 1 xi 1 = t i 1 t i 1 2 t 30. Plot the x component of the velocity versus time. Add a trend line with a linear fit. Show the equation of the line and the R-squared value. 13
14 Data Analysis: Free Fall: 1. Describe the relationship between the acceleration and time, the velocity and time, and the yposition and time. 2. What is the value for the acceleration due to gravity found using the y position versus time plot? 3. What is the error between the acceleration due to gravity found using the y position versus time plot and the accepted value of 9.8 m/s2? 4. What is the value for the acceleration due to gravity found using the y component of velocity versus time plot? 5. What is the error between the value for the acceleration due to gravity found using the y component of velocity versus time plot and the accepted value of 9.8 m/s2? 6. Which method gave you a better approximation for the acceleration due to gravity? Explain why that method gave the better approximation. 14
15 Projectile Motion: 7. Describe the relationship between the acceleration and time, the velocity and time, and the position and time for both the horizontal and vertical component? 8. What is the value for the acceleration due to gravity found using the y position versus time plot? 9. What is the error between the acceleration due to gravity found using the y position versus time plot and the accepted value of 9.8 m/s2? 10. What is the value for the acceleration due to gravity found using the y component of velocity versus time plot? 11. What is the error between the value for the acceleration due to gravity found using the y component of velocity versus time plot and the accepted value of 9.8 m/s2? 12. Which method gave you a better approximation for the acceleration due to gravity? Explain why that method gave the better approximation. 15
16 4. Pre-Lab LAB-02 One and Two Dimensional Motion Name: Sec/Group: Date: 1. Determine the acceleration of a particle down a smooth plane, inclined at an angle respect to the horizontal. Draw the acceleration vectors on the diagram below. with 2. A particle is launched in a gravitational field ( g ) with an initial velocity v o at an angle with respect to the horizontal. a.) Write down the equations for displacement along the x and along the y directions, as a function of time. b.) Combine the equations in part 2a.) to eliminate time ( t ) and explicitly show that the resulting equation of the form y = f ( x ) shows that the trajectory is parabolic. 16
Lab I. 2D Motion. 1 Introduction. 2 Theory. 2.1 scalars and vectors LAB I. 2D MOTION 15
LAB I. 2D MOTION 15 Lab I 2D Motion 1 Introduction In this lab we will examine simple two-dimensional motion without acceleration. Motion in two dimensions can often be broken up into two separate one-dimensional
More informationLab I. 2D Motion. 1 Introduction. 2 Theory. 2.1 scalars and vectors LAB I. 2D MOTION 15
LAB I. 2D MOTION 15 Lab I 2D Motion 1 Introduction In this lab we will examine simple two-dimensional motion without acceleration. Motion in two dimensions can often be broken up into two separate one-dimensional
More informationPHY 111L Activity 2 Introduction to Kinematics
PHY 111L Activity 2 Introduction to Kinematics Name: Section: ID #: Date: Lab Partners: TA initials: Objectives 1. Introduce the relationship between position, velocity, and acceleration 2. Investigate
More informationPHY 221 Lab 3 Vectors and Motion in 1 and 2 Dimensions
PHY 221 Lab 3 Vectors and Motion in 1 and 2 Dimensions Print Your Name Print Your Partners' Names Instructions Before lab, read the Introduction, and answer the Pre-Lab Questions on the last page of this
More informationEXPERIMENT 7: ANGULAR KINEMATICS AND TORQUE (V_3)
TA name Lab section Date TA Initials (on completion) Name UW Student ID # Lab Partner(s) EXPERIMENT 7: ANGULAR KINEMATICS AND TORQUE (V_3) 121 Textbook Reference: Knight, Chapter 13.1-3, 6. SYNOPSIS In
More informationMotion on a linear air track
Motion on a linear air track Introduction During the early part of the 17 th century, Galileo experimentally examined the concept of acceleration. One of his goals was to learn more about freely falling
More informationExperiment: Momentum & Impulse in Collisions (Video)
Phy201: General Physics I Laboratory 1 Experiment: Momentum & Impulse in Collisions (Video) Objectives: To utilize momentum carts to investigate the nature of different types of collisions To perform video
More informationLab Partner(s) TA Initials (on completion) EXPERIMENT 7: ANGULAR KINEMATICS AND TORQUE
TA name Lab section Date TA Initials (on completion) Name UW Student ID # Lab Partner(s) EXPERIMENT 7: ANGULAR KINEMATICS AND TORQUE 117 Textbook Reference: Walker, Chapter 10-1,2, Chapter 11-1,3 SYNOPSIS
More informationNewton's 2 nd Law. . Your end results should only be interms of m
Newton's nd Law Introduction: In today's lab you will demonstrate the validity of Newton's Laws in predicting the motion of a simple mechanical system. The system that you will investigate consists of
More informationLinear Motion with Constant Acceleration
Linear Motion 1 Linear Motion with Constant Acceleration Overview: First you will attempt to walk backward with a constant acceleration, monitoring your motion with the ultrasonic motion detector. Then
More informationPHY221 Lab 2 - Experiencing Acceleration: Motion with constant acceleration; Logger Pro fits to displacement-time graphs
Page 1 PHY221 Lab 2 - Experiencing Acceleration: Motion with constant acceleration; Logger Pro fits to displacement-time graphs Print Your Name Print Your Partners' Names You will return this handout to
More informationComputer simulation of radioactive decay
Computer simulation of radioactive decay y now you should have worked your way through the introduction to Maple, as well as the introduction to data analysis using Excel Now we will explore radioactive
More information17-Nov-2015 PHYS MAXWELL WHEEL. To test the conservation of energy in a system with gravitational, translational and rotational energies.
Objective MAXWELL WHEEL To test the conservation of energy in a system with gravitational, translational and rotational energies. Introduction A wheel is suspended by two cords wrapped on its axis. After
More informationAP Physics 1 Summer Assignment Packet
AP Physics 1 Summer Assignment Packet 2017-18 Welcome to AP Physics 1 at David Posnack Jewish Day School. The concepts of physics are the most fundamental found in the sciences. By the end of the year,
More informationUNIT I: MECHANICS Chapter 5: Projectile Motion
IMPORTANT TERMS: Component Projectile Resolution Resultant Satellite Scalar quantity Vector Vector quantity UNIT I: MECHANICS Chapter 5: Projectile Motion I. Vector and Scalar Quantities (5-1) A. Vector
More informationExperiment P05: Position, Velocity, & Acceleration (Motion Sensor)
PASCO scientific Physics Lab Manual: P05-1 Experiment P05: Position, Velocity, & Acceleration (Motion Sensor) Concept Time SW Interface Macintosh file Windows file linear motion 30 m 500 or 700 P05 Position,
More informationStraight Line Motion (Motion Sensor)
Straight Line Motion (Motion Sensor) Name Section Theory An object which moves along a straight path is said to be executing linear motion. Such motion can be described with the use of the physical quantities:
More informationEXPERIMENT 4 ONE DIMENSIONAL MOTION
EXPERIMENT 4 ONE DIMENSIONAL MOTION INTRODUCTION This experiment explores the meaning of displacement; velocity, acceleration and the relationship that exist between them. An understanding of these concepts
More informationIntroduction to Computer Tools and Uncertainties
Experiment 1 Introduction to Computer Tools and Uncertainties 1.1 Objectives To become familiar with the computer programs and utilities that will be used throughout the semester. To become familiar with
More informationGeneral Physics I Lab (PHYS-2011) Experiment MECH-1: Projectile Motion
MECH-1: Projectile Motion Page 1 of 7 1 EQUIPMENT General Physics I Lab (PHYS-2011) Experiment MECH-1: Projectile Motion 1 Mini Launcher ME-6825 1 Time of Flight Accessory ME-6810 1 Phone Jack Extender
More informationLAB 2 - ONE DIMENSIONAL MOTION
Name Date Partners L02-1 LAB 2 - ONE DIMENSIONAL MOTION OBJECTIVES Slow and steady wins the race. Aesop s fable: The Hare and the Tortoise To learn how to use a motion detector and gain more familiarity
More informationMarble Launch Experiment
Marble Launch Experiment Purpose The intent of this experiment is to numerically trace the path of a marble launched into the air at an angle in order to observe the parabolic nature of the trajectory.
More informationPHY 221 Lab 2. Acceleration and Uniform Motion
PHY 221 Lab 2 Name: Partner: Partner: Acceleration and Uniform Motion Introduction: Recall the previous lab During Lab 1, you were introduced to computer aided data acquisition. You used a device called
More informationKinematics Lab. 1 Introduction. 2 Equipment. 3 Procedures
Kinematics Lab 1 Introduction An object moving in one dimension and undergoing constant or uniform acceleration has a position given by: x(t) =x 0 +v o t +1/2at 2 where x o is its initial position (its
More informationProjectile Motion. x = v ox t (1)
Projectile Motion Theory Projectile motion is the combination of different motions in the x and y directions. In the x direction, which is taken as parallel to the surface of the earth, the projectile
More informationLAB 3: WORK AND ENERGY
1 Name Date Lab Day/Time Partner(s) Lab TA (CORRECTED /4/05) OBJECTIVES LAB 3: WORK AND ENERGY To understand the concept of work in physics as an extension of the intuitive understanding of effort. To
More informationLABORATORY V PREDICTING NON-REPETITIVE MOTION
LABORATORY V PREDICTING NON-REPETITIVE MOTION In this section, you will continue working on problems in dynamics, the relationship of force and acceleration especially in complex situations that occur
More informationLABORATORY II DESCRIPTION OF MOTION IN TWO DIMENSIONS
LABORATORY II DESCRIPTION OF MOTION IN TWO DIMENSIONS This laboratory allows you to continue the study of accelerated motion in more realistic situations. The cars you used in Laboratory I moved in only
More informationElectric Fields and Equipotentials
OBJECTIVE Electric Fields and Equipotentials To study and describe the two-dimensional electric field. To map the location of the equipotential surfaces around charged electrodes. To study the relationship
More informationPartner s Name: EXPERIMENT MOTION PLOTS & FREE FALL ACCELERATION
Name: Partner s Name: EXPERIMENT 500-2 MOTION PLOTS & FREE FALL ACCELERATION APPARATUS Track and cart, pole and crossbar, large ball, motion detector, LabPro interface. Software: Logger Pro 3.4 INTRODUCTION
More informationVocabulary Preview. Oct 21 9:53 AM. Projectile Motion. An object shot through the air is called a projectile.
Projectile Trajectory Range Launch angle Vocabulary Preview Projectile Motion Projectile Motion An object shot through the air is called a projectile. A projectile can be a football, a bullet, or a drop
More informationFree Fall and Projectile Motion
[International Campus] Free Fall and Projectile Motion Objective Investigate the motions of a freely falling body and a projectile under the influence of gravity. Find the acceleration due to gravity.
More informationLab 1: Jumping Right In
Lab 1: Jumping Right In Bio427 Biomechanics The first lecture of the class reviewed basic physical quantities that we will use throughout the course. Distance (position), velocity, acceleration, momentum,
More informationChapter 3 Acceleration
Chapter 3 Acceleration Slide 3-1 Chapter 3: Acceleration Chapter Goal: To extend the description of motion in one dimension to include changes in velocity. This type of motion is called acceleration. Slide
More informationPhysics 201 Lab 2 Air Drag Simulation
Physics 201 Lab 2 Air Drag Simulation Jan 28, 2013 Equipment Initial Set Up Type the data from Table 1 into the appropriate cells. By preceding the content of the cell with an equal sign (as in cell A6)
More informationRotational Motion. 1 Purpose. 2 Theory 2.1 Equation of Motion for a Rotating Rigid Body
Rotational Motion Equipment: Capstone, rotary motion sensor mounted on 80 cm rod and heavy duty bench clamp (PASCO ME-9472), string with loop at one end and small white bead at the other end (125 cm bead
More informationLABORATORY II DESCRIPTION OF MOTION IN TWO DIMENSIONS
LABORATORY II DESCRIPTION OF MOTION IN TWO DIMENSIONS In this laboratory you continue the study of accelerated motion in more situations. The carts you used in Laboratory I moved in only one dimension.
More informationExperiment 0 ~ Introduction to Statistics and Excel Tutorial. Introduction to Statistics, Error and Measurement
Experiment 0 ~ Introduction to Statistics and Excel Tutorial Many of you already went through the introduction to laboratory practice and excel tutorial in Physics 1011. For that reason, we aren t going
More informationFalling Bodies (last
Dr. Larry Bortner Purpose Falling Bodies (last edited ) To investigate the motion of a body under constant acceleration, specifically the motion of a mass falling freely to Earth. To verify the parabolic
More informationDeveloping a Scientific Theory
Name Date Developing a Scientific Theory Equipment Needed Qty Equipment Needed Qty Photogate/Pulley System (ME-6838) 1 String (SE-8050) 1 Mass and Hanger Set (ME-8967) 1 Universal Table Clamp (ME-9376B)
More informationLab 1 Uniform Motion - Graphing and Analyzing Motion
Lab 1 Uniform Motion - Graphing and Analyzing Motion Objectives: < To observe the distance-time relation for motion at constant velocity. < To make a straight line fit to the distance-time data. < To interpret
More informationVideo Analysis Inertial and non-inertial reference frames
Video Analysis Inertial and non-inertial reference frames Apparatus Tracker software (free; download from http://www.cabrillo.edu/ dbrown/tracker/) video: two-carts.mov from http://physics.highpoint.edu/
More informationLABORATORY II FORCE AND CONSERVATION OF ENERGY
LABORATORY II FORCE AND CONSERVATION OF ENERGY After studying forces and material bodies in equilibrium, it is natural to examine how forces may affect bodies when they move. We will also explore the relationship
More informationNewton s Second Law. Computer with Capstone software, motion detector, PVC pipe, low friction cart, track, meter stick.
F = m a F = m a Newton s Second Law 1 Object To investigate, understand and verify the relationship between an object s acceleration and the net force acting on that object as well as further understand
More informationDemo: x-t, v-t and a-t of a falling basket ball.
Demo: x-t, v-t and a-t of a falling basket ball. I-clicker question 3-1: A particle moves with the position-versus-time graph shown. Which graph best illustrates the velocity of the particle as a function
More informationMotion with Constant Acceleration
Motion with Constant Acceleration INTRODUCTION Newton s second law describes the acceleration of an object due to an applied net force. In this experiment you will use the ultrasonic motion detector to
More informationChapter 3 Acceleration
Chapter 3 Acceleration Slide 3-1 PackBack The first answer gives a good physical picture. The video was nice, and worth the second answer. https://www.youtube.com/w atch?v=m57cimnj7fc Slide 3-2 Slide 3-3
More informationPurpose: Materials: WARNING! Section: Partner 2: Partner 1:
Partner 1: Partner 2: Section: PLEASE NOTE: You will need this particular lab report later in the semester again for the homework of the Rolling Motion Experiment. When you get back this graded report,
More informationPhysics Chapter 3 Notes. Section 3-1: Introduction to Vectors (pages 80-83)
Physics Chapter 3 Notes Section 3-1: Introduction to Vectors (pages 80-83) We can use vectors to indicate both the magnitude of a quantity, and the direction. Vectors are often used in 2- dimensional problems.
More informationExperiment P28: Conservation of Linear and Angular Momentum (Smart Pulley)
PASCO scientific Physics Lab Manual: P28-1 Experiment P28: Conservation of Linear and Angular Momentum (Smart Pulley) Concept Time SW Interface Macintosh File Windows File rotational motion 45 m 500 or
More informationLab 4: Projectile Motion
59 Name Date Partners OVEVIEW Lab 4: Projectile Motion We learn in our study of kinematics that two-dimensional motion is a straightforward extension of one-dimensional motion. Projectile motion under
More informationAcceleration, Free Fall, Symmetry
Acceleration, Free Fall, Symmetry PURPOSE Observe an accelerating object and draw position vs. time (x-t), velocity vs. time (v-t), and acceleration vs. time (a-t) graphs of its motion. From an x-t, v-t,
More informationCenter of Mass. Evaluation copy
Center of Mass Experiment 19 INTRODUCTION In the most of the previous experiments you have examined the motion of a single object as it underwent a variety of motions. You learned that an object subject
More informationProjectile Motion. Figure 1. The system of coordinates for the projectile motion.
Projectile Motion (1) Introduction and Theory: Consider a projectile motion of a ball as shown in Fig. 1. At t = 0 the ball is released at the position (0, y0) with horizontal velocity vx. Figure 1. The
More informationFree-Fall Motion. All objects near the surface of the Earth experience a downward acceleration caused by gravity. The
Author: Bob Leonard Lab partner: Rob Horne 10/6/2012 Free-Fall Motion Abstract All objects near the surface of the Earth experience a downward acceleration caused by gravity. The acceleration due to gravity
More informationUC Irvine FOCUS! 5 E Lesson Plan
UC Irvine FOCUS! 5 E Lesson Plan Title: Stomp Rockets Grade Level and Course: Pre-Algebra, Geometry, Grade 8 Physical Science, Grades 9-12 Physics (extension) - Trigonometry Materials: 1 stomp rocket per
More informationHuman Arm. 1 Purpose. 2 Theory. 2.1 Equation of Motion for a Rotating Rigid Body
Human Arm Equipment: Capstone, Human Arm Model, 45 cm rod, sensor mounting clamp, sensor mounting studs, 2 cord locks, non elastic cord, elastic cord, two blue pasport force sensors, large table clamps,
More informationExperiment 1: The Same or Not The Same?
Experiment 1: The Same or Not The Same? Learning Goals After you finish this lab, you will be able to: 1. Use Logger Pro to collect data and calculate statistics (mean and standard deviation). 2. Explain
More informationGravity: How fast do objects fall? Student Advanced Version
Gravity: How fast do objects fall? Student Advanced Version Kinematics is the study of how things move their position, velocity, and acceleration. Acceleration is always due to some force acting on an
More informationGravity: How fast do objects fall? Teacher Advanced Version (Grade Level: 8 12)
Gravity: How fast do objects fall? Teacher Advanced Version (Grade Level: 8 12) *** Experiment with Audacity and Excel to be sure you know how to do what s needed for the lab*** Kinematics is the study
More informationExperiment P-9 An Inclined Plane
1 Experiment P-9 An Inclined Plane Objectives To understand the principles of forces on an inclined plane. To measure the parallel component of the gravitational force and compare it to the calculated
More informationthrough any three given points if and only if these points are not collinear.
Discover Parabola Time required 45 minutes Teaching Goals: 1. Students verify that a unique parabola with the equation y = ax + bx+ c, a 0, exists through any three given points if and only if these points
More informationActivity P24: Conservation of Linear and Angular Momentum (Photogate/Pulley System)
Name Class Date Activity P24: Conservation of Linear and Angular Momentum (Photogate/Pulley System) Concept DataStudio ScienceWorkshop (Mac) ScienceWorkshop (Win) Momentum P24 Linear Angular.DS P28 Cons
More informationImpulse, Momentum, and Energy
Impulse, Momentum, and Energy Impulse, Momentum, and Energy 5-1 INTRODUCTION Newton expressed what we now call his second law of motion, 1 not as F = m a, but in terms of the rate of change of momentum
More informationTHE MOVING MAN: DISTANCE, DISPLACEMENT, SPEED & VELOCITY
THE MOVING MAN: DISTANCE, DISPLACEMENT, SPEED & VELOCITY Background Remember graphs are not just an evil thing your teacher makes you create, they are a means of communication. Graphs are a way of communicating
More informationKinematics in Two Dimensions; Vectors
Kinematics in Two Dimensions; Vectors Vectors & Scalars!! Scalars They are specified only by a number and units and have no direction associated with them, such as time, mass, and temperature.!! Vectors
More informationRepresentations of Motion in One Dimension: Speeding up and slowing down with constant acceleration
Representations of Motion in One Dimension: Speeding up and slowing down with constant acceleration Name: Group Members: Date: TA s Name: Apparatus: Aluminum track and supports, PASCO Smart Cart, two cart
More informationGravity Pre-Lab 1. Why do you need an inclined plane to measure the effects due to gravity?
Lab Exercise: Gravity (Report) Your Name & Your Lab Partner s Name Due Date Gravity Pre-Lab 1. Why do you need an inclined plane to measure the effects due to gravity? 2. What are several advantage of
More information170 Test example problems CH1,2,3
170 Test example problems CH1,2,3 WARNING: these are simply examples that showed up in previous semesters test. It does NOT mean that similar problems will be present in THIS semester s test. Hence, you
More informationExperiment 3. d s = 3-2 t ANALYSIS OF ONE DIMENSIONAL MOTION
Experiment 3 ANALYSIS OF ONE DIMENSIONAL MOTION Objectives 1. To establish a mathematical relationship between the position and the velocity of an object in motion. 2. To define the velocity as the change
More informationChapter 3 Acceleration
Chapter 3 Acceleration Slide 3-1 Chapter 3: Acceleration Chapter Goal: To extend the description of motion in one dimension to include changes in velocity. This type of motion is called acceleration. Slide
More informationChapter 4. Motion in Two Dimensions. Position and Displacement. General Motion Ideas. Motion in Two Dimensions
Motion in Two Dimensions Chapter 4 Motion in Two Dimensions Using + or signs is not always sufficient to fully describe motion in more than one dimension Vectors can be used to more fully describe motion
More informationDescribing motion: Kinematics in two dimension
Describing motion: Kinematics in two dimension Scientist Galileo Galilei Issac Newton Vocabulary Vector scalars Resultant Displacement Components Resolving vectors Unit vector into its components Average
More informationPHY 123 Lab 1 - Error and Uncertainty and the Simple Pendulum
To print higher-resolution math symbols, click the Hi-Res Fonts for Printing button on the jsmath control panel. PHY 13 Lab 1 - Error and Uncertainty and the Simple Pendulum Important: You need to print
More informationConservation of Momentum
Learning Goals Conservation of Momentum After you finish this lab, you will be able to: 1. Use Logger Pro to analyze video and calculate position, velocity, and acceleration. 2. Use the equations for 2-dimensional
More informationIn this activity, we explore the application of differential equations to the real world as applied to projectile motion.
Applications of Calculus: Projectile Motion ID: XXXX Name Class In this activity, we explore the application of differential equations to the real world as applied to projectile motion. Open the file CalcActXX_Projectile_Motion_EN.tns
More informationPhysics E-1ax, Fall 2014 Experiment 3. Experiment 3: Force. 2. Find your center of mass by balancing yourself on two force plates.
Learning Goals Experiment 3: Force After you finish this lab, you will be able to: 1. Use Logger Pro to analyze video and calculate position, velocity, and acceleration. 2. Find your center of mass by
More informationChapter 3 Kinematics in Two Dimensions; Vectors
Chapter 3 Kinematics in Two Dimensions; Vectors Vectors and Scalars Units of Chapter 3 Addition of Vectors Graphical Methods Subtraction of Vectors, and Multiplication of a Vector by a Scalar Adding Vectors
More informationWorksheet for Exploration 6.1: An Operational Definition of Work
Worksheet for Exploration 6.1: An Operational Definition of Work This Exploration allows you to discover how work causes changes in kinetic energy. Restart. Drag "handy" to the front and/or the back of
More informationSchool Date. Acceleration, Freefall, Symmetry
Name School Date Acceleration, Freefall, Symmetry PURPOSE Observe an accelerating object and draw position vs. time (x-t), velocity vs. time (v-t), and acceleration vs. time (a-t) graphs of its motion.
More informationEXPERIMENT: THE SPRING II Subtitle: Time Dependence of Oscillations
EXPERIMENT: THE SPRING II Subtitle: Time Dependence of Oscillations OBJECTIVES : A stretched spring is a good example of an oscillator, which oscillates around an equilibrium position ( sum of all forces
More informationEXPERIMENT 1: ONE-DIMENSIONAL KINEMATICS
TA name Lab section Date TA Initials (on completion) Name UW Student ID # Lab Partner(s) EXPERIMENT 1: ONE-DIMENSIONAL KINEMATICS MOTIONS WITH CONSTANT ACCELERATION 117 Textbook Reference: Walker, Chapter
More informationLivePhoto Physics Activity 3. Velocity Change. Motion Detector. Sample
LivePhoto Physics Activity 3 Name: Date: Analyzing Position vs. Time Graphs: The most fundamental measurements of motion involve the determination of an object s location at a series of times. A very effective
More informationMolecular Modeling and Conformational Analysis with PC Spartan
Molecular Modeling and Conformational Analysis with PC Spartan Introduction Molecular modeling can be done in a variety of ways, from using simple hand-held models to doing sophisticated calculations on
More informationUniformly Accelerated Motion
Uniformly Accelerated Motion 2-1 Uniformly Accelerated Motion INTRODUCTION All objects on the earth s surface are being accelerated toward the center of the earth at a rate of 9.81 m/s 2. 1 This means
More informationPHY222 Lab 2 - Electric Fields Mapping the Potential Curves and Field Lines of an Electric Dipole
Print Your Name PHY222 Lab 2 - Electric Fields Mapping the Potential Curves and Field Lines of an Electric Dipole Print Your Partners' Names Instructions January 23, 2015 Before lab, read the Introduction,
More information(a) On the diagram above, draw an arrow showing the direction of velocity of the projectile at point A.
QUESTION 1 The path of a projectile in a uniform gravitational field is shown in the diagram below. When the projectile reaches its maximum height, at point A, its speed v is 8.0 m s -1. Assume g = 10
More informationMotion II. Goals and Introduction
Motion II Goals and Introduction As you have probably already seen in lecture or homework, and if you ve performed the experiment Motion I, it is important to develop a strong understanding of how to model
More informationKinematics in Two-Dimensions
Slide 1 / 92 Slide 2 / 92 Kinematics in Two-Dimensions www.njctl.org Slide 3 / 92 How to Use this File Each topic is composed of brief direct instruction There are formative assessment questions after
More informationMotion with Changing Speed
OBJECTIVES Motion with Changing Speed Collect position, velocity, and acceleration data as a ball travels straight up and down. Analyze the position vs. time, velocity vs. time, and acceleration vs. time
More informationRotational Dynamics. Goals and Introduction
Rotational Dynamics Goals and Introduction In translational dynamics, we use the quantities displacement, velocity, acceleration, mass and force to model the motion of objects. In that model, a net force
More information3.2 Projectile Motion
Motion in 2-D: Last class we were analyzing the distance in two-dimensional motion and revisited the concept of vectors, and unit-vector notation. We had our receiver run up the field then slant Northwest.
More informationMASSACHUSETTS INSTITUTE OF TECHNOLOGY Physics Department. Experiment 03: Work and Energy
MASSACHUSETTS INSTITUTE OF TECHNOLOGY Physics Department Physics 8.01 Fall Term 2010 Experiment 03: Work and Energy Purpose of the Experiment: In this experiment you allow a cart to roll down an inclined
More informationModeling the Motion of a Projectile in Air
In this lab, you will do the following: Modeling the Motion of a Projectile in Air analyze the motion of an object fired from a cannon using two different fundamental physics principles: the momentum principle
More informationMeasurement, Uncertainty, and Uncertainty Propagation
Measurement, Uncertainty, and Uncertainty Propagation 205 Name Date Partners TA Section Measurement, Uncertainty, and Uncertainty Propagation Objective: To understand the importance of reporting both a
More informationKinematics. Become comfortable with the data aquisition hardware and software used in the physics lab.
Kinematics Objective Upon completing this experiment you should Become comfortable with the data aquisition hardware and software used in the physics lab. Have a better understanding of the graphical analysis
More informationChapter: Newton s Laws of Motion
Table of Contents Chapter: Newton s Laws of Motion Section 1: Motion Section 2: Newton s First Law Section 3: Newton s Second Law Section 4: Newton s Third Law 1 Motion What is motion? Distance and Displacement
More informationPotential and Kinetic Energy
Lab VII Potential and Kinetic Energy 1 Introduction This is a lab about the interplay between kinetic and potential energy. While we can calculate forces and accelerations of an object as it moves along
More informationName: Lab Partner: Section:
Chapter 7 Energy Name: Lab Partner: Section: 7.1 Purpose In this experiment, energy and work will be explored. The relationship between total energy, kinetic energy and potential energy will be observed.
More informationLab 5: Projectile Motion
Lab 5 Projectile Motion 47 Name Date Partners Lab 5: Projectile Motion OVERVIEW We learn in our study of kinematics that two-dimensional motion is a straightforward application of onedimensional motion.
More information