SM6-36. adaptation instructions. auxiliary contacts on CS1 operating mechanism. English. distribution HTA
|
|
- Katrina Black
- 5 years ago
- Views:
Transcription
1 SM6-36 English distribution HTA adaptation instructions auxiliary contacts on CS operating mechanism
2 SCHNEIDER ELECTRIC foreword symbols and conven ons you w ll f d all the symbols below throughout the document, nd c g the hazard levels depend ng on the d erent types of s DANGER as per so DANGER : fa re to follow th s struct on l result n death or ser ous njury. WARNING as per so WARNING: fa ure to follow th s nstruct on may result n death or ser ous njury. CAUTION as per so CAUTION: fa ure to follow th s nstruct on may result n r es. Th s alert nal can also be used to nd cate pract ces that could damage the SM6 un t. INFORMATION- ADVICE We draw your attent on to th s spec f c po t. SB22879 rev s on : 02
3 contact the Sc der Electr c serv ce t for d ag s and ad ce Call your sales representat ve who l put you n contact w th the closest SCHNEIDER ELECTRIC group serv ce centre. You can log on to: der---electr c.com str bu on rules CAUTION CAUTION The a m of s publ on s to enable the SM6 un t to be stalled correctly. Th s document s not a commerc al document.it s a st ctly techn cal document drawn up by Schne der Electr. 2 SB22879 rev s on : 02
4 safety rules CAUTION CAUTION All the operat ons desc ed below must be performed n comp ance th a cable safety standards, under the respons b ty of a competent author ty. Only undertake the work after hav ng read and understood all the explanat ons ven n th s document.if you have any d culty comply ng w th these rules, please contact Schne der Electr. WARNING The contractor must be cer f ed and author sed to m pulate and perform work on the SM6 t. : 02 3
5 4 SB22879 rev s on : 02
6 general str bu on rules Th s document s ntended st ctly for use w th n Schne der Electr c and s not a sales document. It conta ns nstruct ons for replac ng or adapt ng subassemb es. The spare parts referred to n th s document are not ava able separately. They are sold as part of the k t. Reproduct on of th s manual or any part thereof s proh b ted and the document s reserved exclu vely for use by Schne der Electr c representat ves. safety rules The cub cle tch must be n the open po t on and the operat ng mechan m deact vated. Where the mechan sm s moto ed, ensure the aux ary LV c cu ts are d connected. The busbars or cables can be ve. In order to check, the sw tch must be de---energ ed on the busbar s de and cable s de. spec al tools torque wrench, range to 50 Nm. prepar on The procedures for acce ng the operat ng mechan m and reassemb ng the cub cle are desc ed n the operat ng nstruct ons. f eld of appl t on Installed base. SB22879 rev s on : 02 5
7 k t descr pt on ro g contact nd c k t n o A aux l ary contact nd cat on C A : aux ary contacts mount ng plate (for 6, 9, or 2 contacts) B : ter nal block support plate C : or 2 term nal blocks D : or 2 dent f cat on str s E : w r ng screws and bolts E D B A 6 SB22879 rev s on : 02
8 operat g mode aux l ary contacts Remove the LV compartment cover screws 2 screws + spur washers Unscrew the M6x35 cross recess screws. f tt ng the contact support plate and cage nuts Install the contact support plate us ng 2 screws and self---lock ng nuts. T gh g torque 8 Nm. F t the 2 cage nuts. f tt ng the cage nuts 2 ntroduce the cage nut nto ts rectangular locat ng holefrom the out de of the cub cle. 2 manoeuvre t through to the n e of the cub cle push the cage nut n the sense of the arrow so that theupper part s aga nst the n de of the metalwork. 4 cage nut s fully located. SB22879 rev s on : 02 7
9 f tt ng the term nal block and ts support plate S S4 S5 4 2 S7 S8 S0 S9 S S2 S2 S3 S6 Install the te support plate. nal block and M cro---sw tch mark ng Q Q2 2 4 S6 4 S S5 4 S S agram S S2 W re up as per the agram. 8 SB22879 rev s on : 02
10 and band together.ref t the control compartment cover Screw the M6x35 cross recess screws. Notch A allows the w ng to pass through.ref t the LV compartment cover checks Check the elect cal operat on as per the block d agram.the elect cal checks are made at the rece v ng end te nal block.if elect cal check ng cannot be ca ed out, use a buzzer to check that the m cro---sw tches have sw tched over. sw h n on oper g mec s w mod ed push buttons from 03/2/993 onwards Can only be f d to an opera g me sm w h rot g contacts stalled. Assemble the 3 cro--- tches to the support bracket. x the support bracket to the operat ng mechan m. W re up the m cro---s tchs. Band the w r ng to the operat ng mechan. SB22879 rev s on : 02 9
11 F t the term nal block.connect the m cro---sw tch w ng to the term nal block. w r ng d agram XB S25 S26 S27 operat ng mechan sm w th non---mod f ed push button Before 03/2/993 Remove the push button. F t the new push button. 0 SB22879 rev s on : 02
12 E Assemble the 3 cro--- tches to the support bracket. x the support bracket to the operat ng mechan m. t the sp ng nto po t on. W re up the m cro--- tches. Band the w r ng to the operat ng mechan. F t the term nal block.connect the m cro---sw tch w ng to the term nal block. SB22879 rev s on : 02
13 w r ng d agram XB S25 S26 S27 screw hten ng torques T hten ng torque at 80% of elast c m t (Nm) for T sta nless steel greased or Class 8.8 steel ungreased screws nut th washer nut w th notched base Nylstop nut w th washer Nom d a (mm) at or grower contact or sp ng steel alu Cu or Al at contact 3,5,5,7,2,7 4 2,5 3,5 3,5 4, 2,8 3, ,3 5,5 7,5 6 8,5 3 3,5 5,5 0 4, , , Note: for steels below class apply a coe c ent of 0.8 (0.5 for cage nuts). 2 SB22879 rev s on : 02
14 Schne der Electr c serv e centers are there for: en nee ng and techn cal a tance start-up tra n ng prevent ve and correct ve ma ntenance adaptat on work spare parts Call your sales represe ve who w ll put you n touch w th your nearest der Electr c serv ce centre. Schne der Electr c Industr es SAS 89, boulevard Frankl n Roosevelt F Rue l--- Malma son (France) Tel : +33 (0) der--- electr c.com SB22879 rev s on : 02 As standards, spec cat ns and des gns change from t me to t me, please ask for con rmat n of the nformat n g ven n th s publ cat n. Concept on, rédact on: Serv ce Documentat on Techn que T&D Ed t on : 26/07/20
SM6-36. adaptation instructions. fuse blowing electrical. English. distribution HTA
SM6-36 English distribution HTA adaptation instructions fuse blowing electrical signalling SCHNEIDER ELECTRIC foreword symbols and conven ons you w ll f d all the symbols below throughout the document,
More informationSM6-36. adaptation instructions. replacing a VT. English
SM6-36 English distribution MT adaptation instructions replacing a VT SCHNEIDER ELECTRIC foreword symbols and conven ons you w ll f d all the symbols below throughout the document, nd c g the hazard levels
More informationSM6-36. d str but on HTA. motor sat on of a CIT operat ng mechan sm
SM6-36 d str but on HTA on motor sat on of a CIT operat ng mechan sm SCHNEIDER ELECTRIC foreword symbols and conven ons you w ll f d all the symbols below throughout the document, nd c g the hazard levels
More informationSM6-36. adaptation instructions. motorisation of a CI1 or CI2 operating mechanism. English. distribution HTA
SM6-36 English distribution HTA adaptation instructions motorisation of a CI1 or CI2 operating mechanism SCHNEIDER ELECTRIC foreword symbols and conven ons you w ll f d all the symbols below throughout
More informationHUSTLER 7' & 8' POOL TABLE ASSEM BLY I NSTRUCTI ONS
HUSTLER 7' & 8' POOL TABLE ASSEM BLY I NSTRUCTI ONS NG2515PB/NG2520PB THANK Y OU! Th a n k yo u f o r p u r ch a si n g t h i s p r o d u ct. We w o r k a r o u n d t h e cl o ck a n d a r o u n d t h
More informationINSTALLATION INSTRUCTIONS ATV Plow Blade Part Number: (50 ), (54 ), or (60 ) Application: All Terrain Vehicles
INSTALLATION INSTRUCTIONS ATV Plow Blade Part Number: 78950 (50 ), 78954 (54 ), or 78960 (60 ) Application: All Terrain Vehicles Your safety, and the safety of others, is very important. To help you make
More informationINSTALLATION INSTRUCTIONS ATV SNOW PLOW Mounting Kit: PN Application: HONDA 300
INSTALLATION INSTRUCTIONS ATV SNOW PLOW Mounting Kit: PN 37850 Application: HONDA 300 Your safety, and the safety of others, is very important. To help you make informed decisions about safety, we have
More informationInstruction Sheet COOL SERIES DUCT COOL LISTED H NK O. PR D C FE - Re ove r fro e c sed rea. I Page 1 Rev A
Instruction Sheet COOL SERIES DUCT COOL C UL R US LISTED H NK O you or urc s g t e D C t oroug y e ore s g / as e OL P ea e rea g product PR D C FE RES - Re ove r fro e c sed rea t m a o se e x o duct
More informationWARNING. INJURY HAZARD Failure to observe these instructions could lead to severe injury or death.
INSTALLATION INSTRUCTIONS ATV Front Plow Mount Kit Part Number: 80031 Applications: 2007+ Honda Rancher 420 2007+ Honda Rancher ES 420 2009+ Honda Rancher AT 420 *Not compatible with 2.5ci or A2000 winches
More informationINSTALLATION INSTRUCTIONS ATV SNOW PLOW Mounting Kit: PN Application: HONDA MODELS: 450S AND 450ES
INSTALLATION INSTRUCTIONS ATV SNOW PLOW Mounting Kit: PN 37852 Application: HONDA MODELS: 450S AND 450ES Your safety, and the safety of others, is very important. To help you make informed decisions about
More informationA L A BA M A L A W R E V IE W
A L A BA M A L A W R E V IE W Volume 52 Fall 2000 Number 1 B E F O R E D I S A B I L I T Y C I V I L R I G HT S : C I V I L W A R P E N S I O N S A N D TH E P O L I T I C S O F D I S A B I L I T Y I N
More informationProgression in calculations Years 5 and 6
Progression in calculations Years 5 and 6 Introduction At the centre of the mastery approach to the teaching of mathematics is the belief that all pupils have the potential to succeed. They should have
More informationINSTALLATION INSTRUCTIONS ATV SNOW PLOW Mounting Kit: PN Application: HONDA 400
INSTALLATION INSTRUCTIONS ATV SNOW PLOW Mounting Kit: PN 37851 Application: HONDA 400 Your safety, and the safety of others, is very important. To help you make informed decisions about safety, we have
More informationPLAY OFF 48" FOOSBALL TABLE ASSEM BLY I NSTRU CTI ONS
PLAY OFF 48" FOOSBALL TABLE ASSEM BLY I NSTRU CTI ONS NG1031F THANK Y OU! Th a n k yo u f o r p u r ch a si n g t h i s p r o d u ct. We w o r k a r o u n d t h e cl o ck a n d a r o u n d t h e g l o
More informationProgression in calculations Years 3 and 4
Progression in calculations Years 3 and 4 Introduction At the centre of the mastery approach to the teaching of mathematics is the belief that all pupils have the potential to succeed. They should have
More informationSHARK Snow Plow. 52 (132 cm) / 60 (152 cm) Complete system blade INSTRUCTIONS / ESTABLISHMENT
SHARK Snow Plow 52 (132 cm) / 60 (152 cm) Complete system blade INSTRUCTIONS / ESTABLISHMENT OPERATING INSTRUCTIONS Congratulations! You ve just purchased the most durable plow system in the industry.
More informationPARTS MANUAL 2 INCH CHIPPER/SHREDDER. SC cc SUBARU
www.bearcatproducts.com 2 INCH CHIPPER/SHREDDER SC2170 170cc SUBARU PARTS MANUAL PN: 1641-00 Rev. 0011 Companion to 1509-00 Range: D01688 - Current Before You Begin DEAR ECHO BEAR CAT CUSTOMER Thank you
More informationFor Customer Service, Rev A - 6/ OF 6
Item SP-6219 50 Universal Snow Plow Package RED Plow Item SP-6257 64 Universal Snow Plow Package RED Plow For Customer Service, Email CustomerService@yourfingertips-online.com Please read and understand
More informationF AX:
W e strive to ensure that our produc t s are of the highest quality and free of manufacturing defec t s or missing p ar t s. Howeve r, if you have any problems with your new product, DO NOT RETURN IT T
More informationER2 Short-head Electric Chain Hoist
O/M NO.SHER2-0903-CE-00 ER2 Short-head Electric Chain Hoist (250kg to 5t) Operation Manual (SHER2M/SHER2SG/SHER2SP) Introduction The KITO Short-head Electric Chain Hoist is intended for effective use in
More informationPR CYCLONE SECONDARY SHUTOFF
EN PR CYCLONE SECONDARY SHUTOFF ORIGINAL INSTRUCTIONS CYCLONE SECONDARY SHUTOFF PR530 CYCLONE SECONDARY SHUTOFF PR330 CYCLONE SECONDARY SHUTOFF PR200-250 CYCLONE SECONDARY SHUTOFF PR150 TECHNICAL DATA
More informationPoleMaster User Manual (Northern Hemisphere)
PoleMaster User Manual (Northern Hemisphere) 1. Hardware Installation 1.1 Attach the PoleMaster camera unit to the quick install plate using the three bolts supplied. In the case of the AZ EQ5-GT and Mesu
More informationSelf-Testing Prevectron 2 Millenium Lightning Conductor Set-up and Installation Manual
Self testing Prevectron 2 Millenium Lightning Conductor ENGLISH Self-Testing Prevectron 2 Millenium Lightning Conductor Set-up and Installation Manual S6.60T S4.50T S3.40T N.B. : Information and Specifications
More informationPUSH TUBE STANDARD DUTY
PUSH TUBE STANDARD DUTY ASSEMBLY / OWNER S MANUAL Part No: 15-0070 PUR223 Rev. 00 OPERATING INSTRUCTIONS Congratulations! You ve just purchased the most durable plow component in the industry. Cycle Country
More informationTHIS PAGE DECLASSIFIED IAW EO IRIS u blic Record. Key I fo mation. Ma n: AIR MATERIEL COMM ND. Adm ni trative Mar ings.
T H S PA G E D E CLA SSFED AW E O 2958 RS u blc Recod Key fo maon Ma n AR MATEREL COMM ND D cumen Type Call N u b e 03 V 7 Rcvd Rel 98 / 0 ndexe D 38 Eneed Dae RS l umbe 0 0 4 2 3 5 6 C D QC d Dac A cesson
More informationFOR POLARIS ATV s P/N ASSEMBLY / OWNERS MANUAL
MID-MOUNT KIT FOR POLARIS ATV s P/N 15-3591 ASSEMBLY / OWNERS MANUAL Application PLOW PUSH FRAME NO. 15-0070, 33-0000 or 33-0070 Before you begin, please read these instructions and check to be sure all
More informationINSTALLATION INSTRUCTIONS FRONT PLOW MOUNT KIT Part Number: Application: Polaris Sportsman 400, 500, 800
WARN INDUSTRIES, INC. 12900 S.E. Capps Road, Clackamas, OR USA 97015-8903, 1-503-722-1200, FAX: 1-503-722-3000 Customer Service: 1-800-543-9276 Dealer Locator Service: 1-800-910-1122 International Sales/Customer
More informationWARNING. INJURY HAZARD Failure to observe these instructions could lead to severe injury or death.
INSTALLATION INSTRUCTIONS Kawasaki Mule Plow Mounting Kit WARN Part Number: 71983 Application: Kawasaki Mule 2002-2006 Your safety, and the safety of others, is very important. To help you make informed
More informationFOR CAN-AM ATV s P/N ASSEMBLY / OWNERS MANUAL
MID-MOUNT KIT FOR CAN-AM ATV s P/N 15-7580 ASSEMBLY / OWNERS MANUAL Application PLOW PUSH FRAME NO. 15-0070, 33-0000 or 33-0070 Before you begin, please read these instructions and check to be sure all
More informationB Left-hand case side (x1) F
MD693/ HD-1688 WOODEN RADIO-CONTROLLED GRANDFATHER CLOCK WITH WESTMINSTER CHIMES INSTRUCTIONS PLEASE READ ALL THE INSTRUCTIONS CAREFULLY BEFORE YOU SET YOUR CLOCK GOING AND ENSURE YOU KEEP HOLD OF THESE
More informationHT600 Dat e Code: 2 - HT MW Purchase Date: PLEASE RETAIN THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE. All Rights Reserved
We strive to ensure that our products are of the highest quality and free of manufacturing defects or missing parts. However, if you have any problems with your new product, D O NOT RETURN IT TO THE STORE,
More informationInstallation guide 862 MIT / MIR
Installation guide 862 MIT / MIR in combination with: 864 MTT or 863 MRT or (dual) spot element November 2005 Part no. 4416.232_Rev3 Enraf BV PO Box 812 2600 AV Delft Netherlands Tel. : +31 15 2701 100
More informationBETA Protecting. Low-Voltage Fuse Systems. LV HRC fuse links. 3/36 Siemens ET B1 2008
LV HRC fuse links Overview LV HRC fuses are used for installation systems in non-residential, commercial and industrial buildings as well as in switchboards of power supply companies. They therefore protect
More informationCBRD30CP3 & BOWRD30CP INSTRUCTION MANUAL
CBRD30CP3 & BOWRD30CP INSTRUCTION MANUAL PROLOGUE Your BSA Illuminated sight is for use on both compound and standard bows. Each version of the BSA illuminated sight has a specific reticle to help maintain
More informationPressure Transmitter ED 701
Pressure Transmitter ED 701 Hygienic and industrial process connections Zero setting function Accuracy < 0.1% FS Quick response time < 25 ms High long-term stability Excellent repeatability Active compensation
More informationCommercial Generator Parts Catalog. PROTEC Series
Commercial Generator Parts Catalog PROTEC Series YD ÁÁ ÁÁ To avoid errors or delay in filling your parts order, always give the MODEL, SPEC NO. and SERIAL NO. from the Onan nameplate. For handy reference,
More informationPLOW MOUNT KIT FOR POLARIS RANGER P/N ASSEMBLY / OWNERS MANUAL
PLOW MOUNT KIT FOR POLARIS RANGER P/N 34-3010 ASSEMBLY / OWNERS MANUAL Application PLOW PUSH FRAME NO. 34-0000 or 34-0070 Before you begin, please read these instructions and check to be sure all parts
More informationKM-70 Panel-mounting Thermostat
KM-70 Panel-mounting Thermostat B 60.2045.0 Operating Instructions 2008-10-24/00073778 Please read these Operating Instructions before commissioning the instrument. Keep the manual in a place that is accessible
More informationImformation of C091D series
Imformation of C09D series The QTY of contacts is -pin to -pin, the connection method for the thread type, pinhole connections for welding type, press-fit and PCB type. This series of connectors to prevent
More informationINSTALLATION INSTRUCTIONS ProVantage Plow Pulley Part Number: 84526
ProVantage Plow Pulley Part Number: 84526 GENERAL SAFETY PRECAUTIONS Your safety, and the safety of others, is very important. To help you make informed decisions about safety, we have provided installation
More informationTHE VIPER ATV PLOW SYSTEM
THE VIPER ATV PLOW SYSTEM SKU : SY_PL50(BK, RE, YE) SY_PL54(BK, RE, YE), SY_PL60(BK, RE, YE) 23001 Industrial Blvd Rogers, MN 55374 I. THE VIPER PLOW System Overview The VIPER PLOW system is broken up
More informationR a t i o n a l i s e d B r a k e A c t u a t o r s
C o m m e r c i a l V e h i c l e S y s t e m s P r o d u c t C a t a l o g u e R a t i o n a l i s e d B r a k e A c t u a t o r s... for Air Disc Brake applications Disclaimer The information contained
More informationE Service E-Series Padlock seires PadlockManual No. Part No. Part No. Part
E-Series Padlock E Service seires Manual Padlock 0 No. Part No. Part No. Part Padlock body Locking plate Ball bearing 0 Shackle Bumper 0 Socket head screw Mx0 Activator cam Identification plate Spring
More informationA.R.M. 52 POLY PLOW BLACK With QUICK ATTACH MOUNTING SYSTEM MODEL NUMBER Owner s Manual
70 38TH AVE W PO BOX 57 SPENCER, IA 530 PHONE: 7-6-49 FAX: 7-6-048 SERVICE: 800-84- E-MAIL: ccac@cyclecountry.com www.cyclecountry.com A.R.M. 5 POLY PLOW BLACK With QUICK ATTACH MOUNTING SYSTEM MODEL NUMBER
More informationFOREMAN ASSEMBLY / OWNER S MANUAL
ATV PLOW MOUNT For HONDA FOREMAN ASSEMBLY / OWNER S MANUAL Part No: 15-1610 MAN0418 Rev. 00 OPERATING INSTRUCTIONS Congratulations! You ve just purchased the most durable plow component in the industry.
More informationLatest generation testo air velocity & IAQ probes with cable handle. Instruction manual
Latest generation testo air velocity & IAQ probes with cable handle Instruction manual Contents Contents 1 About this document... 5 2 Safety and disposal... 5 3 System description... 6 4 Description of
More informationATV WP2 FRONT MOUNT PUSH TUBE
ATV WP2 FRONT MOUNT PUSH TUBE ASSEMBLY / OWNER S MANUAL Part No: 16-0000 MAN0352 Rev. 00 OPERATING INSTRUCTIONS Congratulations! You ve just purchased the most durable plow component in the industry. Cycle
More informationASSEMBLY / OWNER S MANUAL
ATV PLOW MOUNT For Yamaha ATVs ASSEMBLY / OWNER S MANUAL Part No: 15-5590 MAN0050 Rev. 01 OPERATING INSTRUCTIONS Congratulations! You ve just purchased the most durable plow component in the industry.
More informationDRIFTER PLOW-IN-A-BOX ASSEMBLY / OWNER S MANUAL
DRIFTER PLOW-IN-A-BOX ASSEMBLY / OWNER S MANUAL Part No: 10-0550 OPERATING INSTRUCTIONS Congratulations! You ve just purchased one of the industry s top plow systems. The DRIFTER Plow System works great
More informationINSTALLATION INSTRUCTIONS PLOW MOUNT KIT Part Number: Application: Honda Foreman 500
WARN INDUSTRIES, INC. 12900 S.E. Capps Road, Clackamas, OR USA 97015-8903, 1-503-722-1200, FAX: 1-503-722-3000 Customer Service: 1-800-543-9276 Dealer Locator Service: 1-800-910-1122 International Sales/Customer
More informationVX25 Enclosure System. Technical documentation PE conductor connection, current carrying capacity
VX Enclosure System Technical documentation PE conductor connection, current carrying capacity Enclosure system VX Contents Contents. General remarks. Introduction. Notes on the design of the earthing
More informationSize : Ends : Min Temperature : Max Temperature : Materials : Brass
Size : Ends : Min Temperature : Max Temperature : DN 1/2" to 1 Free nut BSP, male or female - 10 C + 120 C Max Pressure : 25 Bars Specifications : Before or after water meter PTFE packing With free nut
More informationP a g e 5 1 of R e p o r t P B 4 / 0 9
P a g e 5 1 of R e p o r t P B 4 / 0 9 J A R T a l s o c o n c l u d e d t h a t a l t h o u g h t h e i n t e n t o f N e l s o n s r e h a b i l i t a t i o n p l a n i s t o e n h a n c e c o n n e
More informationTie Bar Extension Measuring Chain
Force Tie Bar Extension Measuring Chain Type 9827A... for Clamped or Screwed Installation in Injection Molding Machines Tie bar ex ten sion meas ur ing chain con sist ing of a quartz longi tu di nal meas
More informationThe perfect Torque Limiting Clutch for
The perfect Torque Limiting Clutch for Machine Tools Packaging Machinery Printing and Paper Machinery Automated Systems Power Transmission compact, backlash-free torque limiting clutch Immediate disengagement
More informationINSTALLATION INSTRUCTIONS ATV PLOW ACCESSORY Plow Mounting Kit:Warn PN Application:2002 and newer+ Suzuki Eiger 400
INSTALLATION INSTRUCTIONS ATV PLOW ACCESSORY Plow Mounting Kit:Warn PN 63840 Application:2002 and newer+ Suzuki Eiger 400 Your safety, and the safety of others, is very important. To help you make informed
More informationOperating Instructions for Digital Manometer. Model: MAN-SD
Operating Instructions for Digital Manometer Model: MAN-SD 1. Contents 1. Contents...2 2. Note...3 3. Instrument Inspection...3 4. Regulation Use...4 5. Operating Principle...4 6. Mechanical Connection...5
More informationPresco AG. Standard Air Capacitor 10 nf / 2 kv. Type CL-0N10-K201. User's manual
Zürcherstrasse 70 -CH 8104 Weiningen Tel. + 41 44 750 63 63 Fax + 41 44 750 63 66 P.O. Box 155 Switzerland Email info@prescoag.com Internet : www.prescoag.com Standard Air Capacitor 10 nf / 2 kv Type CL-0N10-K201
More informationA.R.M. 52 PLOW With QUICK ATTACH MOUNTING SYSTEM MODEL NUMBER BLACK MODEL NUMBER GRAY. Owner s Manual
70 8TH AVE W PO BOX 7 SPENCER, IA 0 PHONE: 7-6-9 FAX: 7-6-08 SERVICE: 800-8- E-MAIL: ccac@cyclecountry.com www.cyclecountry.com A.R.M. PLOW With QUICK ATTACH MOUNTING SYSTEM MODEL NUMBER 0-00 BLACK MODEL
More informationInstruction Manual. Kite-22 Camera Crane Starter Package (KITE-22-STARTER) Exclusive of Weights
Instruction Manual Kite-22 Camera Crane Starter Package (KITE-22-STARTER) Exclusive of Weights All rights reserved No part of this document may be reproduced, stored in a retrieval system, or transmitted
More informationINST T N DLS. - Ext t t. Carefully read these instructions before first use. Code: Date: / /201 Rev.:.0
INST T N - Ext t t Carefully read these instructions before first use. DLS GB Code: Date: / /201 Rev.:.0 DLS IMPORTANT SAFETY INSTRUCTIONS This manual contains important safety information, which must
More informationINSTALLATION SHEET : RHA-UNV-242-K This Is An Original Product From Fulham Co., Inc
STALLATION SHEET : RHA-UNV-242-K Description: This Kit contains a Universal Voltage CFL Electronic Ballast, which features Program Start, End-Of-Life Protection (EOL), Flicker-Free Operation, and Auto-Restart.
More informationED 701 General Industry Pressure Transmitter
ED 701 General Industry Pressure Transmitter Standard industrial process connections Complete range of electrical connections 4... 20 ma and Voltage outputs Accuracy: 0.1%, 0.2% and 0.4% FS Quick response
More informationLoad Washers. Force kn until kn. Type 9101A A
Force Load Washers 0... 20 kn until 0... 700 kn Type 9101A... 9107A Force sensor for measuring quasistatic and dynamic forces in industrial monitoring tasks. F z The force sensors are delivered uncalibrated
More informationLoad Washers. Force. for Forces of 7, kn. F z. Type 9001A A 9081B, 9091B
Force Load Washers for Forces of 7,5... 1 200 kn Type 9001A... 9071A 9081B, 9091B 1-component force sensor for measuring dynamic and quasistatic forces in z direction. F z Calibrated measuring range 100
More informationORTHOBLOC 3000 Drive systems Maintenance
15 en 284 261 282 113 130 120 061 002 264 193 099 001 25 063 65 119 112 133 252 254 1 115 118 04 ORTHOBLOC 3000 Maintenance NOTE LEROY-SOMER reserves the right to modify the characteristics of its products
More information'-. MICROMEr II. The MICROMET8 II is shipped assembled except for the Filar Eyepiece, Micrometer Stage, and Standard Vise.
MICROMEr II '-. UNPACKING: Carefully unpack and check contents. If any components are missing or damaged, save the packing list and material, and advise the carrier and Buehler Ltd. of the discrepancy.
More informationTelescope. 1. Read these instructions carefully and familiarise yourself with the procedure before assembling the unit.
Telescope a Simple assembly instructions- Please keep for future reference IMPORTANT 1. Read these instructions carefully and familiarise yourself with the procedure before assembling the unit. 2. Check
More informationDN 1/4" to 4" Male, Female BSP - 10 C C Max Pressure : 40 Bars Specifications : Anti blow-out stem PTFE packing Full bore.
Size : Ends : Min Temperature : Max Temperature : DN 1/4" to 4" Male, Female BSP - 10 C + 120 C Max Pressure : 40 Bars Specifications : Anti blow-out stem PTFE packing Full bore Materials : Brass Page
More informationDRIFTER PLOW-IN-A-BOX
DRIFTER PLOW-IN-A-BOX ASSEMBLY / OWNER S MANUAL Part No: 10-0550 OPERATING INSTRUCTIONS Congratulations! You ve just purchased one of the industry s top plow systems. The DRIFTER Plow System works great
More informationFo r u s e w i t h Br o i l m a s t e r Pr e m i u m Ga s Gr i l l s. B Page 1
Side Burner Owner s Manual-1 Model DPSBSS-1 (Natural or Propane) Fo r u s e w i t h Br o i l m a s t e r Pr e m i u m Ga s Gr i l l s Retain Owner s Manual for Future Reference. B100539-1-0709 Page 1 THIS
More informationOperating instructions Magnetic-inductive flow meter SM6x04 SM7x04 SM8x04
Operating instructions Magnetic-inductive flow meter SM6x04 SM7x04 SM8x04 UK 80223776 / 00 11 / 2018 Contents 1 Preliminary note...3 2 Safety instructions...4 3 Functions and features...4 4 Function...5
More informationSwitches in conformity with ATEX directive
E Switches in conformity with ATEX directive page / General Catalog 09-0 Technical concepts page /9 A B Position switches FD series page / Category Zone Approvals Article code extension G M ATEX category
More informationTHE LOSMANDY G-11 MOUNT
Checking the parts THE LOSMANDY G-11 MOUNT Depending on which accessories you ordered, your G-11 mount was shipped in four or more boxes. The contents of each box are as follows: Equatorial Mount Adjustable
More informationPLOW MOUNT KIT FOR YAMAHA VIKING P/N ASSEMBLY / OWNERS MANUAL. Application PLOW PUSH FRAME NO or
PLOW MOUNT KIT FOR YAMAHA VIKING P/N 34-5020 ASSEMBLY / OWNERS MANUAL Application PLOW PUSH FRAME NO. 34-0000 or 34-0070 Before you begin, please read these instructions and check to be sure all parts
More informationEdward C. Robison, PE, SE. 02 January Architectural Metal Works ATTN: Sean Wentworth th ST Emeryville, CA 94608
Edward C. Robison, PE, SE ks ATTN: Sean Wentworth 1483 67 th ST Emeryville, CA 94608 02 January 2013 SUBJ: 501 CORTE MADERA AVE, CORTE MADERA, CA 94925 BALCONY GUARD BASE PLATE MOUNTS The guards for the
More informationSize : Ends : Min Temperature : Max Temperature : Materials : Brass
Size : Ends : Min Temperature : Max Temperature : DN 1/2" to 1 Free nut BSP, male or female - 10 C + 120 C Max Pressure : 20 Bars Specifications : Before or after water meter PTFE packing With free nut
More informationMelton Series. Owners Manual. Lab Centrifuge. Model # s A C, A C, B C, B C, C C, C C, D C, D C
Melton Series Owners Manual Lab Centrifuge Model # s A-4-115-C, A-4-220-C, B-4-115-C, B-4-220-C, C-4-115-C, C-4-220-C, D-4-115-C, D-4-220-C Serial Numbers 85500 & Above NOTICE Wire this centrifuge according
More information52095 dx sx. S.p.A VERSIONE - EDITING. Via Circonvallazione Nord, Guastalla (RE)
6643 53599 4837 5889 50793 53583 53597 53598 5360 53584 36777 50756 577 5360 5358 443 50433 35984 4006 5355 376 377 394 3390 5306 5358 53580 53573 407 5357 8 8853 938 3999 45936 45935 45934 39765 3900
More informationImportant Instructions
Important Instructions Subject Use With Cabinet Hardmount Trunnion Replacement Cabinet Hardmount 8-60 Pound Washer-Extractors and Kits F77000, F7700, F7700, F7700, F7700, F7700, F9P and F9P WARNING This
More informationWHEEL BEARINGS OIL LUBRICATED WHEEL ENDS*: GREASE LUBRICATED WHEEL ENDS: SU G G E ST E D OI L PRO P E RT I E S
WHEEL BEARINGS OIL LUBRICATED WHEEL ENDS*: * N o te: For unitized wheel ends, please refer to the Spicer RM S e rvice Manual Oil should be changed at least every 100,000 miles or once a year, and whenever
More informationSurface-mounting Thermostats ATH Type Series
Page 1/9 urface-mounting Thermostats ATH eries k enclosure protection IP 54 k tested to IN EN 14597 (replacing IN 3440) Brief description Thermostats control and monitor thermal processes. Instruments
More informationHilti North America Installation Technical Manual Technical Data MI System Version
MIC-SA-MAH 174671 Hilti North America Installation Technical Manual Technical Data MI System Version 1. 08.017 Terms of common cooperation / Legal disclaimer The product technical data published in these
More informationMil-Stak PT/2016 PARTS MANUAL
Mil-Stak PT/0 PARTS MANUAL Mil-Stak Inc. 0 Hwy 0 West Fruitland Idaho Phone 0--0 ext - Main Assemblies ITEM PAGE P00 P00 P0 P0 PT 0 P00 Wheel Assembly Valve Block Frame Assembly PT Stackbed Assembly Receiving
More informationTelescope Sight 4 X 24 for G3 Rifle
Telescope Sight 4 x 24 For G3 Rifle Telescope Sight 4 X 24 for G3 Rifle Instruction Manual HECKLER & KOCH, INC. 2148 Pacific Boulevard Sterling, Virginia 20166-8903 U.S.A. TEL. (703) 450-1900 TELEFAX (703)
More informationOASIS WIRELESS WEATHER STATION
User Manual 3910-B Royal Avenue, Simi Valley, Ca 93063 805-527-4498 RMIS Part No. 500760 TABLE OF CONTENTS INTRODUCTION General Description 3 General Precautions 3 INSTALLATION Base Preparation 6 Tower
More informationMINIATURE MICROSWITCHES - PREMIUM
0/08 MINIATURE MICROSWITCHES - PREMIUM V - 86 High precision flexible leaf snap-action mechanism Operation without balance-point, even at extremely slow actuating speed Broad range of operating forces
More informationAutomatic Level Maintenance Manual SAL-XX W/ AIR DAMPENED COMPENSATOR
Automatic Level Maintenance Manual SAL-XX W/ AIR DAMPENED COMPENSATOR CST/Berger 2001 SAL 20/24/28/32 PAGE 1 REV. C 071803 Automatic Level Maintenance Manual User Calibration and Testing... 3 Circular
More informationMADILL MBT GRAPPLE RETURN TO INDEX
MADILL MBT GRAPPLE RETURN TO INDEX MBT CONTROL VALVE Additional Parts Breakdown for: - Outrigger Sections - Rotate Section - End Plate E 00- page Valve section Basic element without additional functions
More informationSPARE PARTS LIST CHAIN SAWS CS35S, & ,
SPARE PARTS LIST CHAIN SAWS CS35S, 967624714 & 967624715,2016-08 Revision Note item Position description Revision 1 combine 14"easy start CS 35S & CS 35S FA 2 Page O change the article no. from 586998601
More informationMODEL: R7K4FML3. Remote I/O R7K4F Series. POWER INPUT DC power R: 24 V DC (Operational voltage range: ±10 %; ripple 10 %p-p max.)
Remote I/O R7KF Series I/O MODULE (-III) POWER INPUT DC power R: V DC (Operational voltage range: ±0 %; ripple 0 %p-p max.) 0 (8.7). (.) 7(.8) mm (inch) [] OPTIONS (multiple selections) Output data read
More informationOverload Relays. SIRIUS 3RU1 Thermal Overload Relays. 3RU11 for standard applications. 5/46 Siemens LV 1 AO 2011
SIRIUS 3RU1 Thermal Overview 1 2 7 3 4 6 "Increased safety" type of EEx e according to ATEX directive 94/9/EC The 3RU11 thermal overload relays are suitable for the overload of explosion-proof motors with
More informationBallistic pendulum Operating Instructions Fig. 1: Ballistic pendulum SAFETY PRECAUTIONS
R Ballistic pendulum 11229.00 PHYWE Systeme GmbH & Co. KG Robert-Bosch-Breite 10 D-37079 Göttingen 6 3.8 3.7 3.6 3.5 Phone +49 (0) 551 604-0 Fax +49 (0) 551 604-107 E-mail info@phywe.de Internet www.phywe.de
More informationTrunnion Hook-up (Tilt & Rotary = Full Axis)
. Trunnion Rotary Series March 2004 Trunnion Hook-up (Tilt & Rotary = Full Axis).......... Haas Automation Training MINIMUM MACHINE REQUIREMENTS TO USE THIS PROCEDURE: Haas CNC Mills with 5 axis capability.
More informationDual Red or Green Electronic Dot Sight Instruction Manual
Dual Red or Green Electronic Dot Sight Instruction Manual 2007 VisionPlus INTRODUCTION: Congratulations on your purchase of a VisionPlus Dual Red/Green Electronic Dot Sight. This is a quality product engineered
More informationINSTRUCTIONS FOR ATTACHING THE NORDIC PLOW TO THE ACTION TRACKCHAIR
1 INSTRUCTIONS FOR ATTACHING THE NORDIC PLOW TO THE ACTION TRACKCHAIR Nordic Auto Plow LLC is pleased to provide a plow blade that can be used with your Action Trackchair year round. We are not affiliated
More informationAT LAST!! CAGE CODE 6CVS2. SandMaster 20 for Skid Steers THE FUTURE OF EMERGENCY FLOOD CONTROL HAS ARRIVED.
SandMaster 20 for Skid Steers AT LAST!! THE FUTURE OF EMERGENCY FLOOD CONTROL HAS ARRIVED. Hydraulic technology replaces hand labor for fast and efficient on site filling and placement of sandbags. Fill
More information2.9. Namur Valves 2.9. page 175. Namur 1/4 also called Namur 1 in accordance to VDI / VDE Namur 1/2 also called Namur 2.
2.9 page 175 Namur 1/4 also called Namur 1 in accordance to VDI / VDE 3845. Namur 1/2 also called Namur 2. 2.9 Namur Valves + Selected models are available for low temperature application. Temperature-range:
More informationSitting height... 6 Back tilt and back height... 6 Armrest... 7 Brakes... 7 Charging VELA Tango 300E... 7
U K u s e r m a n u a l w w w. v e l a. E U contents 1.0. introduction...................................................... 3 1.1. guarantee......................................................... 4
More informationUse precise language and domain-specific vocabulary to inform about or explain the topic. CCSS.ELA-LITERACY.WHST D
Lesson eight What are characteristics of chemical reactions? Science Constructing Explanations, Engaging in Argument and Obtaining, Evaluating, and Communicating Information ENGLISH LANGUAGE ARTS Reading
More information