74AHC14-Q100; 74AHCT14-Q100

Size: px
Start display at page:

Download "74AHC14-Q100; 74AHCT14-Q100"

Transcription

1 Rev. 9 July 202 Product data sheet. General description The is a high-speed Si-gate CMOS device and is pin compatible with Low-power Schottky TTL (LSTTL). It is specified in compliance with JEDEC standard No. 7. The provides six inverting buffers with Schmitt trigger action. They are capable of transforming slowly changing input signals into sharply defined, jitter-free output signals. This product has been qualified to the utomotive Electronics Council (EC) standard Q00 (Grade ) and is suitable for use in automotive applications. 2. Features and benefits utomotive product qualification in accordance with EC-Q00 (Grade ) Specified from 40 C to +85 C and from 40 C to +25 C Balanced propagation delays ll inputs have Schmitt trigger actions Inputs accept voltages higher than V CC Input levels: For 74HC4-Q00: CMOS level For 74HCT4-Q00: TTL level ESD protection: MIL-STD-883, method 305 exceeds 2000 V HBM JESD22-4F exceeds 2000 V MM JESD22-5- exceeds 200 V (C = 200 pf, R = 0 ) Multiple package options

2 3. Ordering information Table. Type number Ordering information Package 4. Functional diagram Temperature range Name Description Version 74HC4-Q00 74HC4D-Q00 40 C to +25 C SO4 plastic small outline package; 4 leads; body width 3.9 mm 74HC4PW-Q00 40 C to +25 C TSSOP4 plastic thin shrink small outline package; 4 leads; body width 4.4 mm 74HC4BQ-Q00 40 C to +25 C DHVQFN4 plastic dual in-line compatible thermal enhanced very thin quad flat package; no leads; 4 terminals; body mm 74HCT4-Q00 74HCT4D-Q00 40 C to +25 C SO4 plastic small outline package; 4 leads; body width 3.9 mm 74HCT4PW-Q00 40 C to +25 C TSSOP4 plastic thin shrink small outline package; 4 leads; body width 4.4 mm 74HCT4BQ-Q00 40 C to +25 C DHVQFN4 plastic dual in-line compatible thermal enhanced very thin quad flat package; no leads; 4 terminals; body mm SOT08- SOT402- SOT762- SOT08- SOT402- SOT Y 2 2 2Y Y Y Y Y Y mna204 00aac497 mna025 Fig. Logic symbol Fig 2. IEC logic symbol Fig 3. Logic diagram (one Schmitt trigger) Product data sheet Rev. 9 July of 7

3 5. Pinning information 5. Pinning 74HC4-Q00 74HCT4-Q00 74HC4-Q00 74HCT4-Q00 terminal index area Y VCC VCC Y Y 2 2Y Y 5 5Y 2Y 3 3Y 4 5 GND () Y 4 3Y GND Y GND 4Y aaa aaa Transparent top view () This is not a supply pin. The substrate is attached to this pad using conductive die attach material. There is no electrical or mechanical requirement to solder this pad. However, if it is soldered, the solder land should remain floating or be connected to GND. Fig 4. Pin configuration SO4 and TSSOP4 Fig 5. Pin configuration DHVQFN4 5.2 Pin description Table 2. Pin description Symbol Pin Description data input Y 2 data output 2 3 data input 2 2Y 4 data output data input 3 3Y 6 data output 3 GND 7 ground (0 V) 4Y 8 data output data input 4 5Y 0 data output 5 5 data input 5 6Y 2 data output data input 6 V CC 4 supply voltage Product data sheet Rev. 9 July of 7

4 6. Functional description Table 3. Function table [] Input n L H Output ny H L [] H = HIGH voltage level; L = LOW voltage level. 7. Limiting values Table 4. Limiting values In accordance with the bsolute Maximum Rating System (IEC 6034). Voltages are referenced to GND (ground = 0 V). Symbol Parameter Conditions Min Max Unit V CC supply voltage V V I input voltage V I IK input clamping current V I < 0.5 V [] 20 - m I OK output clamping current V O < 0.5 V or V O >V CC +0.5V [] m I O output current V O = 0.5 V to (V CC V) m I CC supply current m I GND ground current 75 - m T stg storage temperature C P tot total power dissipation T amb = 40 C to +25 C [2] mw [] The input and output voltage ratings may be exceeded if the input and output current ratings are observed. [2] For SO4 packages: above 70 C the value of P tot derates linearly at 8 mw/k. For TSSOP4 packages: above 60 C the value of P tot derates linearly at 5.5 mw/k. For DHVQFN4 packages: above 60 C the value of P tot derates linearly at 4.5 mw/k. 8. Recommended operating conditions Table 5. Operating conditions Symbol Parameter Conditions Min Typ Max Unit 74HC4-Q00 V CC supply voltage V V I input voltage V V O output voltage 0 - V CC V T amb ambient temperature C 74HCT4-Q00 V CC supply voltage V V I input voltage V V O output voltage 0 - V CC V T amb ambient temperature C Product data sheet Rev. 9 July of 7

5 9. Static characteristics Table 6. Static characteristics t recommended operating conditions; voltages are referenced to GND (ground = 0 V). Symbol Parameter Conditions 25 C 40 C to +85 C 40 C to +25 C Unit Min Typ Max Min Max Min Max 74HC4-Q00 V OH HIGH-level V I = V T+ or V T output voltage I O = 50 ; V CC = 2.0 V V I O = 50 ; V CC = 3.0 V V I O = 50 ; V CC = 4.5 V V I O = 4.0 m; V CC = 3.0 V V I O = 8.0 m; V CC = 4.5 V V V OL LOW-level V I = V T+ or V T output voltage I O = 50 ; V CC = 2.0 V V I O = 50 ; V CC = 3.0 V V I O = 50 ; V CC = 4.5 V V I O = 4.0 m; V CC = 3.0 V V I O = 8.0 m; V CC = 4.5 V V I I input leakage V I = 5.5 V or GND; current V CC =0Vto5.5V I CC supply current V I =V CC or GND; I O = 0 ; V CC =5.5V C I input pf capacitance C O output capacitance pf 74HCT4-Q00 V OH HIGH-level V I = V T+ or V T output voltage I O = 50 ; V CC = 4.5 V V I O = 8.0 m; V CC = 4.5 V V V OL LOW-level V I = V T+ or V T output voltage I O = 50 ; V CC = 4.5 V V I O = 8.0 m; V CC = 4.5 V V I I input leakage current V I = 5.5 V or GND; V CC =0Vto5.5V I CC supply current V I =V CC or GND; I O = 0 ; V CC =5.5V I CC C I C O additional supply current input capacitance output capacitance per input pin; V I =V CC 2. V; other pins at V CC or GND; I O =0; V CC = 4.5 V to 5.5 V m pf pf Product data sheet Rev. 9 July of 7

6 0. Dynamic characteristics Table 7. Dynamic characteristics Voltages are referenced to GND (ground = 0 V); for test circuit see Figure 7. Symbol Parameter Conditions 25 C 40 C to +85 C 40 C to +25 C Unit Min Typ [] Max Min Max Min Max 74HC4-Q00 t pd propagation n to ny; see Figure 6 [2] delay V CC = 3.0 V to 3.6 V C L = 5 pf ns C L = 50 pf ns V CC = 4.5 V to 5.5 V C L = 5 pf ns C L = 50 pf ns C PD power dissipation capacitance f i = MHz; V I =GNDtoV CC [3] pf 74HCT4-Q00 t pd propagation n to ny; see Figure 6 [2] delay V CC = 4.5 V to 5.5 V C L = 5 pf ns C L = 50 pf ns C PD power dissipation capacitance f i = MHz; V I =GNDtoV CC [3] pf [] Typical values are measured at nominal supply voltage (V CC = 3.3 V and V CC = 5.0 V). [2] t pd is the same as t PLH and t PHL. [3] C PD is used to determine the dynamic power dissipation (P D in W). P D =C PD V CC 2 f i N+ (C L V CC 2 f o ) where: f i = input frequency in MHz; f o = output frequency in MHz; C L = output load capacitance in pf; V CC = supply voltage in V; N = number of inputs switching; (C L V 2 CC f o ) = sum of the outputs. Product data sheet Rev. 9 July of 7

7 . Waveforms V I n input GND t PHL t PLH V OH ny output V OL mna344 Fig 6. Measurement points are given in Table 8. V OL and V OH are typical voltage output levels that occur with the output load. Input to output propagation delays Table 8. Measurement points Type Input Output 74HC4-Q V CC 0.5 V CC 74HCT4-Q00.5 V 0.5 V CC V I 90 % negative pulse GND 0 % t f t W t r V I positive pulse 0 % GND t r 90 % t W t f V CC G VI DUT VO RT CL 00aah768 Fig 7. Test data is given in Table 9. Definitions test circuit: R T = Termination resistance should be equal to output impedance Z o of the pulse generator C L = Load capacitance including jig and probe capacitance Test circuit for measuring switching times Product data sheet Rev. 9 July of 7

8 Table 9. Test data Type Input Load Test V I t r, t f C L 74HC4-Q00 V CC 3.0 ns 50 pf, 5 pf t PLH, t PHL 74HCT4-Q V 3.0 ns 50 pf, 5 pf t PLH, t PHL 2. Transfer characteristics Table 0. Transfer characteristics t recommended operating conditions; voltages are referenced to GND (ground = 0 V); see Figure 8 and Figure 9. Symbol Parameter Conditions 25 C 40 C to +85 C 40 C to +25 C Unit Min Typ Max Min Max Min Max 74HC4-Q00 V T+ positive-going V CC = 3.0 V V threshold V CC = 4.5 V V voltage V CC = 5.5 V V V T negative-going V CC = 3.0 V V threshold V CC = 4.5 V V voltage V CC = 5.5 V V V H hysteresis V CC = 3.0 V V voltage V CC = 4.5 V V V CC = 5.5 V V 74HCT4-Q00 V T+ positive-going V CC = 4.5 V V threshold voltage V CC = 5.5 V V V T negative-going V CC = 4.5 V V threshold voltage V CC = 5.5 V V V H hysteresis V CC = 4.5 V V voltage V CC = 5.5 V V 3. Transfer characteristics waveforms V O V I V T+ V T VH V H V T+ V I V O V T mna207 mna208 Fig 8. Transfer characteristics Fig 9. Transfer characteristics definitions Product data sheet Rev. 9 July of 7

9 .5 I CC (m) mna4 5 I CC (m) 4 mna V I (V) V 5 I (V) a. V CC =3.0V b. V CC =4.5V 6 mna43 I CC (m) V 6 I (V) Fig 0. c. V CC =5.5V Typical 74HC transfer characteristics Product data sheet Rev. 9 July of 7

10 6 mna44 8 mna45 I CC (m) I CC (m) V 5 I (V) V 6 I (V) a. V CC =4.5V b. V CC =5.5V Fig. Typical 74HCT transfer characteristics 4. pplication information R C mna035 For 74HC4-Q00: f = -- T RC Fig 2. For 74HCT4-Q00: f = -- T RC Relaxation oscillator Product data sheet Rev. 9 July of 7

11 5. Package outline SO4: plastic small outline package; 4 leads; body width 3.9 mm SOT08- D E X c y H E v M Z 4 8 Q pin index 2 ( ) 3 θ L p 7 L e b p w M detail X mm scale DIMENSIONS (inch dimensions are derived from the original mm dimensions) UNIT mm inches max b p c D () E () e H () E L L p Q v w y Z Note. Plastic or metal protrusions of 0.5 mm (0.006 inch) maximum per side are not included θ o 8 o OUTLINE VERSION REFERENCES IEC JEDEC JEIT EUROPEN PROJECTION ISSUE DTE SOT08-076E06 MS Fig 3. Package outline SOT08- (SO4) Product data sheet Rev. 9 July 202 of 7

12 TSSOP4: plastic thin shrink small outline package; 4 leads; body width 4.4 mm SOT402- D E X c y H E v M Z 4 8 pin index 2 Q ( ) 3 θ 7 e b p w M detail X L p L mm scale DIMENSIONS (mm are the original dimensions) UNIT 2 3 b p c D () E (2) e H () E L L p Q v w y Z max. mm θ o 8 o 0 Notes. Plastic or metal protrusions of 0.5 mm maximum per side are not included. 2. Plastic interlead protrusions of 0.25 mm maximum per side are not included. OUTLINE VERSION REFERENCES IEC JEDEC JEIT SOT402- MO-53 EUROPEN PROJECTION ISSUE DTE Fig 4. Package outline SOT402- (TSSOP4) Product data sheet Rev. 9 July of 7

13 DHVQFN4: plastic dual in-line compatible thermal enhanced very thin quad flat package; no leads; 4 terminals; body 2.5 x 3 x 0.85 mm SOT762- D B E c terminal index area detail X terminal index area e e b 2 6 v M w M C C B y C C y L 7 E h e D h X mm scale DIMENSIONS (mm are the original dimensions) UNIT () max. b c D () D h E () Eh e e L v w y y mm Note. Plastic or metal protrusions of mm maximum per side are not included. OUTLINE VERSION REFERENCES IEC JEDEC JEIT SOT MO EUROPEN PROJECTION ISSUE DTE Fig 5. Package outline SOT762- (DHVQFN4) Product data sheet Rev. 9 July of 7

14 6. bbreviations Table. cronym CDM CMOS DUT ESD HBM LSTTL MM MIL bbreviations Description Charged Device Model Complementary Metal-Oxide Semiconductor Device Under Test ElectroStatic Discharge Human Body Model Low-power Schottky Transistor-Transistor Logic Machine Model Military 7. Revision history Table 2. Revision history Document ID Release date Data sheet status Change notice Supersedes v Product data sheet - - Product data sheet Rev. 9 July of 7

15 8. Legal information 8. Data sheet status Document status [][2] Product status [3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [] Please consult the most recently issued document before initiating or completing a design. [2] The term short data sheet is explained in section Definitions. [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL Definitions Draft The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. Nexperia does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet short data sheet is an extract from a full data sheet with the same product type number(s) and title. short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local Nexperia sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. Product specification The information and data provided in a Product data sheet shall define the specification of the product as agreed between Nexperia and its customer, unless Nexperia and customer have explicitly agreed otherwise in writing. In no event however, shall an agreement be valid in which the Nexperia product is deemed to offer functions and qualities beyond those described in the Product data sheet. 8.3 Disclaimers Limited warranty and liability Information in this document is believed to be accurate and reliable. However, Nexperia does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Nexperia takes no responsibility for the content in this document if provided by an information source outside of Nexperia. In no event shall Nexperia be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Notwithstanding any damages that customer might incur for any reason whatsoever, Nexperia s aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of Nexperia. Right to make changes Nexperia reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use in automotive applications This Nexperia product has been qualified for use in automotive applications. Unless otherwise agreed in writing, the product is not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or malfunction of a Nexperia product can reasonably be expected to result in personal injury, death or severe property or environmental damage. Nexperia and its suppliers accept no liability for inclusion and/or use of Nexperia products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk. pplications pplications that are described herein for any of these products are for illustrative purposes only. Nexperia makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Customers are responsible for the design and operation of their applications and products using Nexperia products, and Nexperia accepts no liability for any assistance with applications or customer product design. It is customer s sole responsibility to determine whether the Nexperia product is suitable and fit for the customer s applications and products planned, as well as for the planned application and use of customer s third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. Nexperia does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer s applications or products, or the application or use by customer s third party customer(s). Customer is responsible for doing all necessary testing for the customer s applications and products using Nexperia products in order to avoid a default of the applications and the products or of the application or use by customer s third party customer(s). Nexperia does not accept any liability in this respect. Limiting values Stress above one or more limiting values (as defined in the bsolute Maximum Ratings System of IEC 6034) will cause permanent damage to the device. Limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the Recommended operating conditions section (if present) or the Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. Terms and conditions of commercial sale Nexperia products are sold subject to the general terms and conditions of commercial sale, as published at unless otherwise agreed in a valid written individual agreement. In case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. Nexperia hereby expressly objects to applying the customer s general terms and conditions with regard to the purchase of Nexperia products by customer. Product data sheet Rev. 9 July of 7

16 No offer to sell or license Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Export control This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from competent authorities. Translations non-english (translated) version of a document is for reference only. The English version shall prevail in case of any discrepancy between the translated and English versions. 8.4 Trademarks Notice: ll referenced brands, product names, service names and trademarks are the property of their respective owners. 9. Contact information For more information, please visit: For sales office addresses, please send an to: salesaddresses@nexperia.com Product data sheet Rev. 9 July of 7

17 20. Contents General description Features and benefits Ordering information Functional diagram Pinning information Pinning Pin description Functional description Limiting values Recommended operating conditions Static characteristics Dynamic characteristics Waveforms Transfer characteristics Transfer characteristics waveforms pplication information Package outline bbreviations Revision history Legal information Data sheet status Definitions Disclaimers Trademarks Contact information Contents For more information, please visit: For sales office addresses, please send an to: salesaddresses@nexperia.com Date of release: 09 July 202

74AHC14; 74AHCT14. Hex inverting Schmitt trigger

74AHC14; 74AHCT14. Hex inverting Schmitt trigger Rev. 05 4 May 2009 Product data sheet. General description 2. Features The is a high-speed Si-gate CMOS device and is pin compatible with Low-power Schottky TTL (LSTTL). It is specified in compliance with

More information

74HC30-Q100; 74HCT30-Q100

74HC30-Q100; 74HCT30-Q100 Rev. 1 30 January 2013 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The is an. Inputs include clamp diodes. This enables the use of current limiting resistors

More information

74AHC02; 74AHCT02. The 74AHC02; 74AHCT02 provides a quad 2-input NOR function.

74AHC02; 74AHCT02. The 74AHC02; 74AHCT02 provides a quad 2-input NOR function. Rev. 04 2 May 2008 Product data sheet. General description 2. Features 3. Ordering information The is a high-speed Si-gate CMOS device and is pin compatible with Low-power Schottky TTL (LSTTL). It is specified

More information

74AHC30-Q100; 74AHCT30-Q100

74AHC30-Q100; 74AHCT30-Q100 Rev. 1 20 November 2013 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The is a high-speed Si-gate CMOS device and is pin compatible with Low-power Schottky

More information

74HC32-Q100; 74HCT32-Q100

74HC32-Q100; 74HCT32-Q100 Rev. 1 1 ugust 2012 Product data sheet 1. General description The is a quad 2-input OR gate. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages

More information

74HC4050-Q100. Hex non-inverting HIGH-to-LOW level shifter

74HC4050-Q100. Hex non-inverting HIGH-to-LOW level shifter Rev. 1 30 January 2013 Product data sheet 1. General description The is a hex buffer with over-voltage tolerant inputs. Inputs are overvoltage tolerant to 15 V which enables the device to be used in HIGH-to-LOW

More information

74VHC08; 74VHCT08. The 74VHC08; 74VHCT08 provide the quad 2-input AND function.

74VHC08; 74VHCT08. The 74VHC08; 74VHCT08 provide the quad 2-input AND function. Rev. 0 30 June 2009 Product data sheet. General description 2. Features 3. Ordering information The are high-speed Si-gate CMOS devices and are pin compatible with Low-power Schottky TTL (LSTTL). They

More information

74HC132-Q100; 74HCT132-Q100

74HC132-Q100; 74HCT132-Q100 Rev. 3 1 December 2015 Product data sheet 1. General description The is a quad 2-input NAND gate with Schmitt-trigger inputs. Inputs include clamp diodes. This enables the use of current limiting resistors

More information

74HC08-Q100; 74HCT08-Q100

74HC08-Q100; 74HCT08-Q100 Rev. 1 16 July 2012 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The 74HC08-Q100; 7 4HCT08-Q100 is a quad 2-input ND gate. Inputs include clamp diodes. This

More information

Temperature range Name Description Version XC7SET32GW 40 C to +125 C TSSOP5 plastic thin shrink small outline package; 5 leads; body width 1.

Temperature range Name Description Version XC7SET32GW 40 C to +125 C TSSOP5 plastic thin shrink small outline package; 5 leads; body width 1. Rev. 01 3 September 2009 Product data sheet 1. General description 2. Features 3. Ordering information is a high-speed Si-gate CMOS device. It provides a 2-input OR function. Symmetrical output impedance

More information

2-input EXCLUSIVE-OR gate

2-input EXCLUSIVE-OR gate Rev. 01 7 September 2009 Product data sheet 1. General description 2. Features 3. Ordering information is a high-speed Si-gate CMOS device. It provides a 2-input EXCLUSIVE-OR function. Symmetrical output

More information

74HC30; 74HCT General description. 2. Features and benefits. 3. Ordering information. 8-input NAND gate

74HC30; 74HCT General description. 2. Features and benefits. 3. Ordering information. 8-input NAND gate Rev. 7 2 December 2015 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The is an. Inputs include clamp diodes. This enables the use of current limiting resistors

More information

XC7SET General description. 2. Features. 3. Applications. Ordering information. Inverting Schmitt trigger

XC7SET General description. 2. Features. 3. Applications. Ordering information. Inverting Schmitt trigger Rev. 01 31 ugust 2009 Product data sheet 1. General description 2. Features 3. pplications is a high-speed Si-gate CMOS device. It provides an inverting buffer function with Schmitt trigger action. This

More information

74AHC86; 74AHCT86. Quad 2-input EXCLUSIVE-OR gate. The 74AHC86; 74AHCT86 provides a 2-input exclusive-or function.

74AHC86; 74AHCT86. Quad 2-input EXCLUSIVE-OR gate. The 74AHC86; 74AHCT86 provides a 2-input exclusive-or function. Rev. 02 5 November 2007 Product data sheet. General description 2. Features 3. Ordering information The are high-speed Si-gate CMOS devices and are pin compatible with Low-power Schottky TTL (LSTTL). They

More information

74HC2G08-Q100; 74HCT2G08-Q100

74HC2G08-Q100; 74HCT2G08-Q100 Rev. 1 11 November 2013 Product data sheet 1. General description The is a dual 2-input ND gate. Inputs include clamp diodes that enable the use of current limiting resistors to interface inputs to s in

More information

74HC2G16; 74HCT2G16. The 74HC2G16; 74HCT2G16 is a high-speed Si-gate CMOS device. The 74HC2G16; 74HCT2G16 provides two buffers.

74HC2G16; 74HCT2G16. The 74HC2G16; 74HCT2G16 is a high-speed Si-gate CMOS device. The 74HC2G16; 74HCT2G16 provides two buffers. Rev. 1 2 November 2015 Product data sheet 1. General description The is a high-speed Si-gate CMOS device. The provides two buffers. 2. Features and benefits 3. Ordering information Wide supply voltage

More information

74HC1G32-Q100; 74HCT1G32-Q100

74HC1G32-Q100; 74HCT1G32-Q100 Rev. 1 8 ugust 2012 Product data sheet 1. General description 2. Features and benefits 3. Ordering information 74HC1G32-Q100 and 74HCT1G32-Q100 are high-speed Si-gate CMOS devices. They provide a 2-input

More information

74HC1G02-Q100; 74HCT1G02-Q100

74HC1G02-Q100; 74HCT1G02-Q100 Rev. 1 7 ugust 2012 Product data sheet 1. General description 2. Features and benefits 3. Ordering information 74HC1G02-Q100 and 74HCT1G02-Q100 are high speed Si-gate CMOS devices. They provide a 2-input

More information

74LVC14A-Q100. Hex inverting Schmitt trigger with 5 V tolerant input

74LVC14A-Q100. Hex inverting Schmitt trigger with 5 V tolerant input Rev. 2 10 June 2016 Product data sheet 1. General description The provides six inverting buffers with Schmitt trigger input. It is capable of transforming slowly changing input signals into sharply defined,

More information

74HC03-Q100; 74HCT03-Q100

74HC03-Q100; 74HCT03-Q100 Rev. 1 4 July 2013 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The is a quad 2-input NND gate with open-drain outputs. Inputs include clamp diodes that enable

More information

74LVC07A-Q100. Hex buffer with open-drain outputs

74LVC07A-Q100. Hex buffer with open-drain outputs Rev. October 202 Product data sheet. General description The provides six non-inverting buffers. The outputs are open-drain and can be connected to other open-drain outputs to implement active-low wired-or

More information

The 74LV08 provides a quad 2-input AND function.

The 74LV08 provides a quad 2-input AND function. Rev. 4 8 December 2015 Product data sheet 1. General description The is a low-voltage Si-gate CMOS device that is pin and function compatible with 74HC08 and 74HCT08. The provides a quad 2-input AND function.

More information

74HC153-Q100; 74HCT153-Q100

74HC153-Q100; 74HCT153-Q100 Rev. 3 23 January 2014 Product data sheet 1. General description The is a dual 4-input multiplexer. The device features independent enable inputs (ne) and common data select inputs (S0 and S1). For each

More information

The 74LVC10A provides three 3-input NAND functions.

The 74LVC10A provides three 3-input NAND functions. Triple 3-input NND gate Rev. 5 7 November 20 Product data sheet. General description The provides three 3-input NND functions. Inputs can be driven from either 3.3 V or 5 V devices. This feature allows

More information

74AHC541-Q100; 74AHCT541-Q100

74AHC541-Q100; 74AHCT541-Q100 74HC541-Q100; 74HCT541-Q100 Rev. 1 6 June 2013 Product data sheet 1. General description The is a high-speed Si-gate CMOS device. The are octal non-inverting buffer/line drivers with 3-state bus compatible

More information

74HC30; 74HCT General description. 2. Features and benefits. 3. Ordering information. 8-input NAND gate

74HC30; 74HCT General description. 2. Features and benefits. 3. Ordering information. 8-input NAND gate 8-input NND gate Rev. 6 27 December 2012 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The is an 8-input NND gate. Inputs include clamp diodes. This enables

More information

74HC151-Q100; 74HCT151-Q100

74HC151-Q100; 74HCT151-Q100 Rev. 2 11 February 2013 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The are 8-bit multiplexer with eight binary inputs (I0 to I7), three select inputs (S0

More information

Triple inverting Schmitt trigger

Triple inverting Schmitt trigger Rev. 5 7 February 2013 Product data sheet 1. General description The is a high-speed Si-gate CMOS device. This device provides three inverting buffers with Schmitt trigger action. This device is capable

More information

The 74LV32 provides a quad 2-input OR function.

The 74LV32 provides a quad 2-input OR function. Rev. 03 9 November 2007 Product data sheet. General description 2. Features 3. Ordering information The is a low-voltage Si-gate CMOS device that is pin and function compatible with 74HC32 and 74HCT32.

More information

74HC02; 74HCT02. The 74HC02; 74HCT02 provides a quad 2-input NOR function.

74HC02; 74HCT02. The 74HC02; 74HCT02 provides a quad 2-input NOR function. Rev. 03 September 200 Product data sheet. General description 2. Features 3. Ordering information The are high-speed Si-gate CMOS devices that comply with JEDEC standard no. 7. They are pin compatible

More information

74HC00; 74HCT00. The 74HC00; 74HCT00 provides a quad 2-input NAND function.

74HC00; 74HCT00. The 74HC00; 74HCT00 provides a quad 2-input NAND function. Quad 2-input NND gate Rev. 5 25 November 200 Product data sheet. General description 2. Features and benefits 3. Ordering information The are high-speed Si-gate CMOS devices that comply with JEDEC standard

More information

The 74LV08 provides a quad 2-input AND function.

The 74LV08 provides a quad 2-input AND function. Quad 2-input ND gate Rev. 03 6 pril 2009 Product data sheet. General description 2. Features 3. Ordering information The is a low-voltage Si-gate CMOS device that is pin and function compatible with 74HC0

More information

74LVC General description. 2. Features and benefits. 3. Ordering information. Triple 3-input OR gate. The 74LVC332 is a triple 3-input OR gate.

74LVC General description. 2. Features and benefits. 3. Ordering information. Triple 3-input OR gate. The 74LVC332 is a triple 3-input OR gate. Rev. 1 20 March 2013 Product data sheet 1. General description The is a triple 3-input OR gate. Inputs can be driven from either 3.3 V or 5 V devices. This feature allows the use of these devices as translators

More information

74HC86; 74HCT86. Quad 2-input EXCLUSIVE-OR gate. The 74HC86; 74HCT86 provides a 2-input EXCLUSIVE-OR function.

74HC86; 74HCT86. Quad 2-input EXCLUSIVE-OR gate. The 74HC86; 74HCT86 provides a 2-input EXCLUSIVE-OR function. Rev. 3 27 ugust 2012 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The are high-speed Si-gate CMOS devices that comply with JEDEC standard no. 7. They are pin

More information

74HC132; 74HCT132. Quad 2-input NAND Schmitt trigger

74HC132; 74HCT132. Quad 2-input NAND Schmitt trigger Rev. 4 1 December 2015 Product data sheet 1. General description The is a quad 2-input NAND gate with Schmitt-trigger inputs. Inputs include clamp diodes. This enables the use of current limiting resistors

More information

Hex inverter with open-drain outputs

Hex inverter with open-drain outputs Rev. 6 0 November 20 Product data sheet. General description The provides six inverting buffers. The outputs are open-drain and can be connected to other open-drain outputs to implement active-low wired-or

More information

74AUP1G04-Q100. The 74AUP1G04-Q100 provides the single inverting buffer.

74AUP1G04-Q100. The 74AUP1G04-Q100 provides the single inverting buffer. Rev. 1 18 November 2013 Product data sheet 1. General description The provides the single inverting buffer. Schmitt-trigger action at all inputs makes the circuit tolerant to slower input rise and fall

More information

74LVC General description. 2. Features and benefits. Ordering information. Octal D-type flip-flop with data enable; positive-edge trigger

74LVC General description. 2. Features and benefits. Ordering information. Octal D-type flip-flop with data enable; positive-edge trigger Rev. 6 20 November 2012 Product data sheet 1. General description The has eight edge-triggered D-type flip-flops with individual inputs (D) and outputs (Q). common clock input (CP) loads all flip-flops

More information

2-input AND gate with open-drain output. The 74AHC1G09 is a high-speed Si-gate CMOS device.

2-input AND gate with open-drain output. The 74AHC1G09 is a high-speed Si-gate CMOS device. 74HC1G09 Rev. 02 18 December 2007 Product data sheet 1. General description 2. Features 3. Ordering information The 74HC1G09 is a high-speed Si-gate CMOS device. The 74HC1G09 provides the 2-input ND function

More information

74AHC125; 74AHCT125. Quad buffer/line driver; 3-state

74AHC125; 74AHCT125. Quad buffer/line driver; 3-state Rev. 04 January 2008 Product data sheet. General description 2. Features 3. Ordering information The is a high-speed Si-gate CMOS device and is pin compatible with Low-power Schottky TTL (LSTTL). They

More information

74HC04; 74HCT General description. 2. Features and benefits. 3. Ordering information. Hex inverter

74HC04; 74HCT General description. 2. Features and benefits. 3. Ordering information. Hex inverter Rev. 4 3 ugust 202 Product data sheet. General description 2. Features and benefits 3. Ordering information The is a hex inverter. The inputs include clamp diodes that enable the use of current limiting

More information

74HC08; 74HCT General description. 2. Features and benefits. 3. Ordering information. Quad 2-input AND gate

74HC08; 74HCT General description. 2. Features and benefits. 3. Ordering information. Quad 2-input AND gate Quad 2-input ND gate Rev. 4 6 September 2012 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The is a quad 2-input ND gate. Inputs include clamp diodes. This

More information

74AHC541; 74AHCT541. Octal buffer/line driver; 3-state. The 74AHC541; 74AHCT541 is a high-speed Si-gate CMOS device.

74AHC541; 74AHCT541. Octal buffer/line driver; 3-state. The 74AHC541; 74AHCT541 is a high-speed Si-gate CMOS device. Rev. 03 12 November 2007 Product data sheet 1. General description 2. Features 3. Ordering information The is a high-speed Si-gate CMOS device. The are octal non-inverting buffer/line drivers with 3-state

More information

74HC2G34; 74HCT2G34. The 74HC2G34; 74HCT2G34 is a high-speed Si-gate CMOS device. The 74HC2G34; 74HCT2G34 provides two buffers.

74HC2G34; 74HCT2G34. The 74HC2G34; 74HCT2G34 is a high-speed Si-gate CMOS device. The 74HC2G34; 74HCT2G34 provides two buffers. Rev. 01 6 October 2006 Product data sheet 1. General description 2. Features 3. Ordering information The is a high-speed Si-gate CMOS device. The provides two buffers. Wide supply voltage range from 2.0

More information

74LVC1G79-Q100. Single D-type flip-flop; positive-edge trigger. The 74LVC1G79_Q100 provides a single positive-edge triggered D-type flip-flop.

74LVC1G79-Q100. Single D-type flip-flop; positive-edge trigger. The 74LVC1G79_Q100 provides a single positive-edge triggered D-type flip-flop. Rev. 2 12 December 2016 Product data sheet 1. General description The provides a single positive-edge triggered D-type flip-flop. Information on the data input is transferred to the Q-output on the LOW-to-HIGH

More information

Dual buffer/line driver; 3-state

Dual buffer/line driver; 3-state Rev. 2 8 May 2013 Product data sheet 1. General description The is a high-speed Si-gate CMOS devices. This device provides a dual non-inverting buffer/line driver with 3-state output. The 3-state output

More information

74HC02; 74HCT02. The 74HC02; 74HCT02 provides a quad 2-input NOR function.

74HC02; 74HCT02. The 74HC02; 74HCT02 provides a quad 2-input NOR function. Rev. 4 4 September 202 Product data sheet. General description 2. Features and benefits 3. Ordering information The are high-speed Si-gate CMOS devices that comply with JEDEC standard no. 7. They are pin

More information

74HC4002; 74HCT General description. 2. Features and benefits. 3. Ordering information. Dual 4-input NOR gate

74HC4002; 74HCT General description. 2. Features and benefits. 3. Ordering information. Dual 4-input NOR gate Rev. 4 17 September 2012 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The is a dual 4-input NOR gate. Inputs also include clamp diodes that enable the use

More information

74AHC1G14; 74AHCT1G14

74AHC1G14; 74AHCT1G14 Rev. 6 18 May 29 Product data sheet 1. General description 2. Features 3. pplications 74HC1G14 and 74HCT1G14 are high-speed Si-gate CMOS devices. They provide an inverting buffer function with Schmitt

More information

74HC1G02; 74HCT1G02. The standard output currents are half those of the 74HC02 and 74HCT02.

74HC1G02; 74HCT1G02. The standard output currents are half those of the 74HC02 and 74HCT02. Rev. 04 11 July 2007 Product data sheet 1. General description 2. Features 3. Ordering information 74HC1G02 and 74HCT1G02 are high speed Si-gate CMOS devices. They provide a 2-input NOR function. The HC

More information

74HC1G86; 74HCT1G86. 2-input EXCLUSIVE-OR gate. The standard output currents are half those of the 74HC/HCT86.

74HC1G86; 74HCT1G86. 2-input EXCLUSIVE-OR gate. The standard output currents are half those of the 74HC/HCT86. Rev. 04 20 July 2007 Product data sheet 1. General description 2. Features 3. Ordering information 74HC1G86 and 74HCT1G86 are high-speed Si-gate CMOS devices. They provide a 2-input EXCLUSIVE-OR function.

More information

74HC2G08; 74HCT2G General description. 2. Features and benefits. 3. Ordering information. Dual 2-input AND gate

74HC2G08; 74HCT2G General description. 2. Features and benefits. 3. Ordering information. Dual 2-input AND gate Rev. 5 8 October 2013 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The is a dual 2-input ND gate. Inputs include clamp diodes. This enables the use of current

More information

74HC20; 74HCT General description. 2. Features and benefits. 3. Ordering information. Dual 4-input NAND gate

74HC20; 74HCT General description. 2. Features and benefits. 3. Ordering information. Dual 4-input NAND gate Rev. 3 3 September 2012 Product data sheet 1. General description 2. Features and benefits The is a dual 4-input NND gate. Inputs include clamp diodes. This enables the use of current limiting resistors

More information

74AHC244; 74AHCT244. Octal buffer/line driver; 3-state. The 74AHC244; 74AHCT244 is a high-speed Si-gate CMOS device.

74AHC244; 74AHCT244. Octal buffer/line driver; 3-state. The 74AHC244; 74AHCT244 is a high-speed Si-gate CMOS device. Rev. 05 20 December 2007 Product data sheet. General description 2. Features 3. Ordering information The is a high-speed Si-gate CMOS device. The has octal non-inverting buffer/line drivers with 3-state

More information

74HC259-Q100; 74HCT259-Q100

74HC259-Q100; 74HCT259-Q100 Rev. 30 July 202 Product data sheet. General description The are high-speed Si-gate CMOS devices and are pin compatible with Low-power Schottky TTL (LSTTL). They are specified in compliance with JEDEC

More information

74HC10; 74HCT General description. 2. Features and benefits. 3. Ordering information. Triple 3-input NAND gate

74HC10; 74HCT General description. 2. Features and benefits. 3. Ordering information. Triple 3-input NAND gate Rev. 3 5 August 2016 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The is a triple 3-input NAND gate. Inputs include clamp diodes that enable the use of current

More information

74HC153; 74HCT General description. 2. Features and benefits. Dual 4-input multiplexer

74HC153; 74HCT General description. 2. Features and benefits. Dual 4-input multiplexer Rev. 5 23 January 2014 Product data sheet 1. General description The is a dual 4-input multiplexer. The device features independent enable inputs (ne) and common data select inputs (S0 and S1). For each

More information

Dual buffer/line driver; 3-state

Dual buffer/line driver; 3-state Rev. 2 8 May 2013 Product data sheet 1. General description The is a high-speed Si-gate CMOS devices. This device provides a dual non-inverting buffer/line driver with 3-state output. The 3-state output

More information

Low-power configurable multiple function gate

Low-power configurable multiple function gate Rev. 8 23 September 2015 Product data sheet 1. General description The provides configurable multiple functions. The output state is determined by eight patterns of 3-bit input. The user can choose the

More information

74HC366; 74HCT366. Hex buffer/line driver; 3-state; inverting

74HC366; 74HCT366. Hex buffer/line driver; 3-state; inverting Rev. 5 2 February 2016 Product data sheet 1. General description The is a hex inverting buffer/line driver with 3-state outputs controlled by the output enable inputs (OEn). A HIGH on OEn causes the outputs

More information

74LVC125A. 1. General description. 2. Features and benefits. Quad buffer/line driver with 5 V tolerant input/outputs; 3-state

74LVC125A. 1. General description. 2. Features and benefits. Quad buffer/line driver with 5 V tolerant input/outputs; 3-state Rev. 7 pril 203 Product data sheet. General description The consists of four non-inverting buffers/line drivers with 3-state outputs (ny) that are controlled by the output enable input (noe). HIGH at noe

More information

74HC174; 74HCT174. Hex D-type flip-flop with reset; positive-edge trigger

74HC174; 74HCT174. Hex D-type flip-flop with reset; positive-edge trigger Rev. 4 12 May 2016 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The are hex positive edge-triggered D-type flip-flops with individual data inputs (Dn) and

More information

74LVC32A. 1. General description. 2. Features and benefits. 3. Ordering information. Quad 2-input OR gate

74LVC32A. 1. General description. 2. Features and benefits. 3. Ordering information. Quad 2-input OR gate Rev. 6 2 September 20 Product data sheet. General description 2. Features and benefits 3. Ordering information Table. Ordering information Type number Package The provides four 2-input OR gates. Inputs

More information

74HC1GU04GV. 1. General description. 2. Features. 3. Ordering information. Marking. 5. Functional diagram. Inverter

74HC1GU04GV. 1. General description. 2. Features. 3. Ordering information. Marking. 5. Functional diagram. Inverter Rev. 5 1 July 27 Product data sheet 1. General description 2. Features 3. Ordering information The is a high-speed Si-gate CMOS device. It provides an inverting single stage function. The standard output

More information

74HC2G08; 74HCT2G General description. 2. Features and benefits. 3. Ordering information. Dual 2-input AND gate

74HC2G08; 74HCT2G General description. 2. Features and benefits. 3. Ordering information. Dual 2-input AND gate Rev. 5 8 October 2013 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The is a dual 2-input ND gate. Inputs include clamp diodes. This enables the use of current

More information

74AHC1G00; 74AHCT1G00

74AHC1G00; 74AHCT1G00 74HC1G00; 74HCT1G00 Rev. 06 30 May 2007 Product data sheet 1. General description 2. Features 3. Ordering information 74HC1G00 and 74HCT1G00 are high-speed Si-gate CMOS devices. They provide a 2-input

More information

Low-power configurable multiple function gate

Low-power configurable multiple function gate Rev. 2 16 September 2015 Product data sheet 1. General description The is a configurable multiple function gate with Schmitt-trigger inputs. The device can be configured as any of the following logic functions

More information

74HC107-Q100; 74HCT107-Q100

74HC107-Q100; 74HCT107-Q100 Rev. 2 26 January 2015 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The is a dual negative edge triggered JK flip-flop featuring individual J and K inputs,

More information

74HC1G08; 74HCT1G08. 1 General description. 2 Features. 3 Ordering information. 2-input AND gate

74HC1G08; 74HCT1G08. 1 General description. 2 Features. 3 Ordering information. 2-input AND gate Rev. 5 14 March 2018 Product data sheet 1 General description 2 Features 3 Ordering information Table 1. Ordering information Type number 74HC1G08GW 74HCT1G08GW 74HC1G08GV 74HCT1G08GV The is a single.

More information

74HC74-Q100; 74HCT74-Q100

74HC74-Q100; 74HCT74-Q100 Rev. 3 4 December 2015 Product data sheet 1. General description The are dual positive edge triggered D-type flip-flop with individual data (nd), clock (ncp), set (nsd) and reset (nrd) inputs, and complementary

More information

74HC109-Q100; 74HCT109-Q100

74HC109-Q100; 74HCT109-Q100 Rev. 1 28 September 2016 Product data sheet 1. General description The is a dual positive edge triggered JK flip-flop featuring individual nj and nk inputs. It has clock (ncp) inputs, set (nsd) and reset

More information

74ALVC04. 1 General description. 2 Features and benefits. 3 Ordering information. Hex inverter

74ALVC04. 1 General description. 2 Features and benefits. 3 Ordering information. Hex inverter Rev. 3 5 October 207 Product data sheet General description 2 Features and benefits 3 Ordering information Table. Ordering information Type number Package The is a high-performance, low-power, low-voltage,

More information

74HC1G14; 74HCT1G14. The standard output currents are half of those of the 74HC14 and 74HCT14.

74HC1G14; 74HCT1G14. The standard output currents are half of those of the 74HC14 and 74HCT14. Rev. 6 27 December 212 Product data sheet 1. General description 2. Features and benefits 3. pplications 74HC1G14 and 74HCT1G14 are high-speed Si-gate CMOS devices. They provide an inverting buffer function

More information

The 74AXP1G04 is a single inverting buffer.

The 74AXP1G04 is a single inverting buffer. Rev. 1 25 August 2014 Product data sheet 1. General description The is a single inverting buffer. Schmitt-trigger action at all inputs makes the circuit tolerant of slower input rise and fall times. This

More information

7-stage binary ripple counter

7-stage binary ripple counter Rev. 9 28 April 2016 Product data sheet 1. General description The is a with a clock input (CP), an overriding asynchronous master reset input (MR) and seven fully buffered parallel outputs (Q0 to Q6).

More information

74LVC1G125-Q100. Bus buffer/line driver; 3-state

74LVC1G125-Q100. Bus buffer/line driver; 3-state Rev. 2 8 December 2016 Product data sheet 1. General description The provides one non-inverting buffer/line driver with 3-state output. The 3-state output is controlled by the output enable input (OE).

More information

2-input single supply translating NAND gate

2-input single supply translating NAND gate Rev. 1 22 November 2017 Product data sheet 1 General description 2 Features and benefits 3 pplications The is a single, level translating 2-input NND gate. The low threshold inputs support 1.8 V input

More information

Single D-type flip-flop; positive-edge trigger. The 74LVC1G79 provides a single positive-edge triggered D-type flip-flop.

Single D-type flip-flop; positive-edge trigger. The 74LVC1G79 provides a single positive-edge triggered D-type flip-flop. Rev. 12 5 December 2016 Product data sheet 1. General description The provides a single positive-edge triggered D-type flip-flop. Information on the data input is transferred to the Q-output on the LOW-to-HIGH

More information

74HC368; 74HCT368. Hex buffer/line driver; 3-state; inverting

74HC368; 74HCT368. Hex buffer/line driver; 3-state; inverting Rev. 3 9 August 2016 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The is a hex inverting buffer/line driver with 3-state outputs controlled by the output enable

More information

74HC373-Q100; 74HCT373-Q100

74HC373-Q100; 74HCT373-Q100 Rev. 1 10 August 2012 Product data sheet 1. General description The is a high-speed Si-gate CMOS device and is pin compatible with Low-power Schottky TTL. It is specified in compliance with JEDEC standard

More information

74LVC273-Q100. Octal D-type flip-flop with reset; positive-edge trigger

74LVC273-Q100. Octal D-type flip-flop with reset; positive-edge trigger Rev. 1 16 September 2013 Product data sheet 1. General description The has eight edge-triggered, D-type flip-flops with individual Dn inputs and Qn outputs. The common clock (CP) and master reset (MR)

More information

Low-power buffer with voltage-level translator

Low-power buffer with voltage-level translator Rev. 1 28 November 2017 Product data sheet 1 General description 2 Features and benefits The provides the single buffer function. This device ensures a very low static and dynamic power consumption across

More information

74HC541; 74HCT541. Octal buffer/line driver; 3-state

74HC541; 74HCT541. Octal buffer/line driver; 3-state Rev. 4 3 March 2016 Product data sheet 1. General description 2. Features and benefits The is an octal non-inverting buffer/line driver with 3-state outputs. The device features two output enables (OE1

More information

Low-power dual Schmitt trigger inverter

Low-power dual Schmitt trigger inverter Rev. 1 9 October 2014 Product data sheet 1. General description The is a dual inverter with Schmitt-trigger inputs. It transforms slowly changing input signals into sharply defined, jitter-free output

More information

74HC08; 74HCT08. Temperature range Name Description Version. -40 C to +125 C SO14 plastic small outline package; 14 leads; body width 3.

74HC08; 74HCT08. Temperature range Name Description Version. -40 C to +125 C SO14 plastic small outline package; 14 leads; body width 3. Rev. 6 13 June 2017 Product data sheet 1 General description 2 Features and benefits 3 Ordering information Table 1. Ordering information Type number Package The is a quad 2-input ND gate. Inputs include

More information

74HC280; 74HCT bit odd/even parity generator/checker

74HC280; 74HCT bit odd/even parity generator/checker Rev. 3 15 September 2016 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The is a 9-bit parity generator or checker. Both even and odd parity outputs are available.

More information

The 74AUP2G34 provides two low-power, low-voltage buffers.

The 74AUP2G34 provides two low-power, low-voltage buffers. Rev. 6 17 September 2015 Product data sheet 1. General description The provides two low-power, low-voltage buffers. Schmitt trigger action at all inputs makes the circuit tolerant to slower input rise

More information

74HC164; 74HCT bit serial-in, parallel-out shift register

74HC164; 74HCT bit serial-in, parallel-out shift register Rev. 8 19 November 2015 Product data sheet 1. General description The is an 8-bit serial-in/parallel-out shift register. The device features two serial data inputs (DSA and DSB), eight parallel data outputs

More information

3-to-8 line decoder, demultiplexer with address latches

3-to-8 line decoder, demultiplexer with address latches Rev. 6 3 ugust 0 Product data sheet. General description The is a high-speed Si-gate CMOS device and is pin compatible with low-power Schottky TTL (LSTTL). The is specified in compliance with JEDEC standard

More information

74LVC541A-Q100. Octal buffer/line driver with 5 V tolerant inputs/outputs; 3-state

74LVC541A-Q100. Octal buffer/line driver with 5 V tolerant inputs/outputs; 3-state Octal buffer/line driver with 5 V tolerant inputs/outputs; 3-state Rev. 2 4 March 2013 Product data sheet 1. General description The is an octal non-inverting buffer/line driver with 5 V tolerant inputs

More information

74HC238; 74HCT to-8 line decoder/demultiplexer

74HC238; 74HCT to-8 line decoder/demultiplexer Rev. 03 16 July 2007 Product data sheet 1. General description 2. Features 74HC238 and 74HCT238 are high-speed Si-gate CMOS devices and are pin compatible with Low-Power Schottky TTL (LSTTL). The 74HC238/74HCT238

More information

74AHC123A; 74AHCT123A

74AHC123A; 74AHCT123A Rev. 4 8 November 2011 Product data sheet 1. General description The are high-speed Si-gate CMOS devices and are pin compatible with Low power Schottky TTL (LSTTL). They are specified in compliance with

More information

74HC365; 74HCT365. Hex buffer/line driver; 3-state

74HC365; 74HCT365. Hex buffer/line driver; 3-state Rev. 4 27 January 2016 Product data sheet 1. General description 2. Features and benefits The is a hex buffer/line driver with 3-state outputs controlled by the output enable inputs (OEn). A HIGH on OEn

More information

Triple inverting Schmitt trigger with 5 V tolerant input

Triple inverting Schmitt trigger with 5 V tolerant input Rev. 14 15 December 2016 Product data sheet 1. General description The provides three inverting buffers with Schmitt trigger input. It is capable of transforming slowly changing input signals into sharply

More information

Octal buffer/line driver with 5 V tolerant inputs/outputs; 3-state

Octal buffer/line driver with 5 V tolerant inputs/outputs; 3-state Octal buffer/line driver with 5 V tolerant inputs/outputs; 3-state Rev. 4 25 November 2011 Product data sheet 1. General description The is an octal non-inverting buffer/line driver with 5 V tolerant inputs

More information

4-bit magnitude comparator

4-bit magnitude comparator Rev. 6 21 November 2011 Product data sheet 1. General description 2. Features and benefits 3. Ordering information The is a that compares two 4-bit words, A and B, and determines whether A is greater than

More information

74HC253; 74HCT253. Dual 4-input multiplexer; 3-state

74HC253; 74HCT253. Dual 4-input multiplexer; 3-state Rev. 6 1 February 2016 Product data sheet 1. General description The is a dual 4-bit multiplexer, each with four binary inputs (ni0 to ni3), an output enable input (noe) and shared select inputs (S0 and

More information

74LVC1G17-Q100. Single Schmitt trigger buffer

74LVC1G17-Q100. Single Schmitt trigger buffer Rev. 3 28 January 2019 Product data sheet 1. General description 2. Features and benefits 3. Ordering information Table 1. Ordering information Type number Package The provides a buffer function with Schmitt

More information

Octal buffer/line driver; 3-state

Octal buffer/line driver; 3-state Rev. 4 1 March 2016 Product data sheet 1. General description The is a low-voltage Si-gate CMOS device and is pin and function compatible with 74HC244 and 74HCT244. The is an octal non-inverting buffer/line

More information