PERFORMANCE SPECIFICATION SHEET
|
|
|
- Mae Wheeler
- 5 years ago
- Views:
Transcription
1 INCH-POUND MIL-PRF-49464/1C 24 June 2009 SUPERSEDING MIL-PRF-49464/1B 3 June 2004 PERFORMANCE SPECIFICATION SHEET CAPACITORS, CHIP, SINGLE LAYER, FIXED UNENCAPSULATED, CERAMIC DIELECTRIC, ESTABLISHED RELIABILITY, STYLE CPCR01 (HIGH FREQUENCY) This specification sheet is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and MIL-PRF Termination configuration Dimensions (inches) Case code W T Nominal P Minimum B B.012 ± ± C.015 ± ± D.017 ± ± E.020 ± ± F.022 ± ± G.025 ± ± H.027 ± ± J.030 ± ± K.035 ± ± Inches mm Inches mm NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for general information only. 3. Alternate configurations are allowable if they fall within the envelope given and the performance characteristics are not affected. FIGURE 1. CPCR01 capacitors. AMSC N/A FSC 5910
2 REQUIREMENTS: Dimensions and configuration: See figure 1. Case type: Single layer, unencapsulated, with and without buried electrodes inside. Termination configuration: A, B, or C as shown in figure 1. Termination finish: H: A minimum of 100 microinches of percent gold, on both sides. This is suitable for gold wire bonding and conductive epoxy or AuSn eutectic die attachment. Capacitance: See tables I, II, and III. Rated voltage: See tables I, II, and III. Capacitance tolerance: See tables I, II, and III. Operating temperature range: -55 C to +125 C. Temperature coefficient, case code, minimum and maximum capacitance: See tables I, II, and III. TABLE I. Temperature coefficient F capacitor characteristics. 2 M49464F010R9-AB-H F B A,B,C,D M49464F011R8-AC-H F C A,B,C,D M49464F012R0-AD-H F D A,B,C,D M49464F012R2-AD-H F D B,C,D M49464F013R0-AE-H F E B,C,D M49464F013R3-A--H F E F B,C,D M49464F013R6-AF-H F F B,C,D M49464F013R9-AG-H F G B,C,D M49464F014R3-A--H F G H B,C,D M49464F014R7-AH-H F H B,C,D M49464F017R5-AJ-H F J B,C,D M49464F01100-AK-H F K J,K,M M49464F010R6-BB-H F B A,B,C,D M49464F010R7-BB-H F B A,B,C,D M49464F010R8-BB-H F B A,B,C,D M49464F011R2-BC-H F C A,B,C,D M49464F011R5-B--H F C D A,B,C,D M49464F011R8-BD-H F D A,B,C,D M49464F012R0-BE-H F E A,B,C,D M49464F012R2-B--H F E F B,C,D M49464F012R4-B--H F E F B,C,D M49464F012R7-B--H F E F G H B,C,D M49464F013R0-B--H F F G H B,C,D M49464F013R3-B--H F G H B,C,D M49464F013R6-B--H F G H B,C,D M49464F013R9-BH-H F H B,C,D M49464F014R7-BJ-H F J B,C,D M49464F015R1-BJ-H F J B,C,D See footnotes at end of table.
3 TABLE I. Temperature coefficient F capacitor characteristics. Continued. M49464F015R6-BJ-H F J B,C,D M49464F016R2-BJ-H F J B,C,D M49464F016R8-B--H F J K B,C,D M49464F017R5-BK-H F K B,C,D M49464F018R2-BK-H F K B,C,D M49464F019R1-BK-H F K B,C,D M49464F010R1-CB-H F B A,B,C,D M49464F010R2-CB-H F B A,B,C,D M49464F010R3-CB-H F B A,B,C,D M49464F010R4-CB-H F B A,B,C,D M49464F010R5-CB-H F B A,B,C,D M49464F010R6-CC-H F C A,B,C,D M49464F010R7-C--H F C D A,B,C,D M49464F010R8-C--H F C D A,B,C,D M49464F010R9-C--H F C D A,B,C,D M49464F011R0-C--H F C D E A,B,C,D M49464F011R2-C--H F D E F A,B,C,D M49464F011R5-C--H F E F G H A,B,C,D M49464F011R8-C--H F E F G H A,B,C,D M49464F012R0-C--H F F G H A,B,C,D M49464F012R2-C--H F G H B,C,D M49464F012R4-C--H F G H J B,C,D M49464F012R7-CJ-H F J B,C,D M49464F013R0-CJ-H F J B,C,D M49464F013R3-C--H F J K B,C,D M49464F013R6-C--H F J K B,C,D M49464F013R9-C--H F J K B,C,D M49464F014R3-C--H F J K B,C,D M49464F014R7-CK-H F K B,C,D M49464F015R1-CK-H F K B,C,D M49464F015R6-CK-H F K B,C,D M49464F016R2-CK-H F K B,C,D M49464F010R1-DC-H F C A,B,C,D M49464F010R2-D--H F C D E F A,B,C,D M49464F010R3-D--H F C D E F G H A,B,C,D M49464F010R4-D--H F C D E F G H A,B,C,D M49464F010R5-D--H F C D E F G H A,B,C,D M49464F010R6-D--H F D E F G H J A,B,C,D M49464F010R7-D--H F E F G H J A,B,C,D M49464F010R8-D--H F E F G H J K A,B,C,D M49464F010R9-D--H F E F G H J K A,B,C,D M49464F011R0-D--H F F G H J K A,B,C,D M49464F011R2-D--H F G H J K A,B,C,D M49464F011R5-D--H F J K A,B,C,D M49464F011R8-D--H F J K A,B,C,D M49464F012R0-D--H F J K A,B,C,D M49464F012R2-D--H F J K B,C,D M49464F012R4-DK-H F K B,C,D M49464F012R7-DK-H F K B,C,D M49464F013R0-DK-H F K B,C,D 1/ Complete PIN shall include additional symbols to indicate capacitance tolerance, case code (where several case codes are available), termination configuration code (A, B, or C), and failure rate level (M, P, R, or S). 3
4 TABLE II. Temperature coefficient G capacitor characteristics. M49464G012R7-AB-H G B B,C,D M49464G015R1-AC-H G C B,C,D M49464G015R6-AC-H G C B,C,D M49464G016R2-AD-H G D B,C,D M49464G016R8-AD-H G D B,C,D M49464G019R1-AE-H G E B,C,D M49464G01100-AF-H G F J,K,M M49464G01120-AG-H G G J,K,M M49464G01150-AH-H G H J,K,M M49464G01220-AJ-H G J J,K,M M49464G01240-AJ-H G J J,K,M M49464G01330-AK-H G K J,K,M M49464G01360-AK-H G K J,K,M M49464G011R8-BB-H G B A,B,C,D M49464G012R0-BB-H G B A,B,C,D M49464G012R2-BB-H G B B,C,D M49464G012R4-BB-H G B B,C,D M49464G013R3-BC-H G C B,C,D M49464G013R6-BC-H G C B,C,D M49464G013R9-BC-H G C B,C,D M49464G014R3-B--H G C D B,C,D M49464G014R7-B--H G C D B,C,D M49464G015R1-BD-H G D B,C,D M49464G015R6-BD-H G D B,C,D M49464G016R2-B--H G E F B,C,D M49464G016R8-B--H G E F B,C,D M49464G017R5-B--H G E F G B,C,D M49464G018R2-B--H G E F G H B,C,D M49464G019R1-B--H G F G H B,C,D M49464G01100-B--H G G H J,K,M M49464G01120-BH-H G H J,K,M M49464G01150-BJ-H G J J,K,M M49464G01180-BJ-H G J J,K,M M49464G01200-BJ-H G J J,K,M M49464G01220-BK-H G K J,K,M M49464G01240-BK-H G K J,K,M M49464G01270-BK-H G K J,K,M M49464G01300-BK-H G K J,K,M M49464G010R6-CB-H G B A,B,C,D M49464G010R7-CB-H G B A,B,C,D M49464G010R8-CB-H G B A,B,C,D M49464G010R9-CB-H G B A,B,C,D M49464G011R0-CB-H G B A,B,C,D M49464G011R2-CB-H G B A,B,C,D M49464G011R5-CB-H G B A,B,C,D M49464G011R8-CC-H G C A,B,C,D M49464G012R0-CC-H G C A,B,C,D M49464G012R2-C--H G C D B,C,D M49464G012R4-C--H G C D B,C,D M49464G012R7-C--H G C D B,C,D M49464G013R0-C--H G C D E B,C,D M49464G013R3-C--H G D E F B,C,D M49464G013R6-C--H G D E F B,C,D See footnotes at end of table. 4
5 TABLE II. Temperature coefficient G capacitor characteristics. Continued. M49464G013R9-C--H G D E F G B,C,D M49464G014R3-C--H G E F G H B,C,D M49464G014R7-C--H G E F G H B,C,D M49464G015R1-C--H G E F G H B,C,D M49464G015R6-C--H G E F G H B,C,D M49464G016R2-C--H G G H B,C,D M49464G016R8-C--H G G H B,C,D M49464G017R5-C--H G H J B,C,D M49464G018R2-CJ-H G J B,C,D M49464G019R1-CJ-H G J B,C,D M49464G01100-CJ-H G J J,K,M M49464G01120-C--H G J K J,K,M M49464G01150-CK-H G K J,K,M M49464G01180-CK-H G K J,K,M M49464G01200-CK-H G K J,K,M M49464G010R6-DC-H G C A,B,C,D M49464G010R7-D--H G C D A,B,C,D M49464G010R8-D--H G C D A,B,C,D M49464G010R9-D--H G C D A,B,C,D M49464G011R0-D--H G C D E A,B,C,D M49464G011R2-D--H G C D E F A,B,C,D M49464G011R5-D--H G C D E F G H A,B,C,D M49464G011R8-D--H G D E F G H A,B,C,D M49464G012R0-D--H G D E F G H A,B,C,D M49464G012R2-D--H G E F G H B,C,D M49464G012R4-D--H G E F G H J B,C,D M49464G012R7-D--H G E F G H J B,C,D M49464G013R0-D--H G F G H J B,C,D M49464G013R3-D--H G G H J K B,C,D M49464G013R6-D--H G G H J K B,C,D M49464G013R9-D--H G H J K B,C,D M49464G014R3-D--H G J K B,C,D M49464G014R7-D--H G J K B,C,D M49464G015R1-D--H G J K B,C,D M49464G015R6-D--H G J K B,C,D M49464G016R2-D--H G J K B,C,D M49464G016R8-D--H G J K B,C,D M49464G017R5-DK-H G K B,C,D M49464G018R2-DK-H G K B,C,D M49464G019R1-DK-H G K B,C,D M49464G01100-DK-H G K J,K,M 1/ Complete PIN shall include additional symbols to indicate capacitance tolerance, case code (where several case codes are available), termination configuration code (A, B, or C), and failure rate level (M, P, R, or S). 5
6 TABLE III. Temperature coefficient W capacitor characteristics. M49464W01820-AB-H W B K,M M49464W01121-AC-H W C K,M M49464W01151-AD-H W D K,M M49464W01201-AE-H W E K,M M49464W01221-AE-H W E K,M M49464W01241-AE-H W E K,M M49464W01271-AE-H W E K,M M49464W01301-AF-H W F K,M M49464W01331-AF-H W F K,M M49464W01361-AG-H W G K,M M49464W01391-AG-H W G K,M M49464W01431-AH-H W H K,M M49464W01511-AJ-H W J K,M M49464W01561-AJ-H W J K,M M49464W01621-AJ-H W J K,M M49464W01681-AJ-H W J K,M M49464W01751-A--H W J K K,M M49464W01821-AK-H W K K,M M49464W01911-AK-H W K K,M M49464W01102-AK-H W K K,M M49464W01620-BB-H W B K,M M49464W01680-BB-H W B K,M M49464W01750-BB-H W B K,M M49464W01910-BC-H W C K,M M49464W01101-BC-H W C K,M M49464W01121-BD-H W D K,M M49464W01181-BE-H W E K,M M49464W01201-BF-H W F K,M M49464W01221-BF-H W F K,M M49464W01241-BF-H W F K,M M49464W01271-BF-H W F K,M M49464W01301-BG-H W G K,M M49464W01331-BG-H W G K,M M49464W01361-BH-H W H K,M M49464W01391-BH-H W H K,M M49464W01471-BJ-H W J K,M M49464W01681-BK-H W K K,M M49464W016R2-CB-H W B K,M M49464W016R8-CB-H W B K,M M49464W017R5-CB-H W B K,M M49464W018R2-CB-H W B K,M M49464W019R1-CB-H W B K,M M49464W01100-CB-H W B K,M M49464W01120-CB-H W B K,M M49464W01150-CB-H W B K,M M49464W01180-CB-H W B K,M M49464W01200-CB-H W B K,M M49464W01220-CB-H W B K,M M49464W01240-CB-H W B K,M See footnotes at end of table. 6
7 TABLE III. Temperature coefficient W capacitor characteristics. Continued. M49464W01270-CB-H W B K,M M49464W01300-CB-H W B K,M M49464W01330-CB-H W B K,M M49464W01360-CB-H W B K,M M49464W01390-CB-H W B K,M M49464W01430-CB-H W B K,M M49464W01470-CB-H W B K,M M49464W01510-C--H W B C K,M M49464W01560-C--H W B C K,M M49464W01620-CC-H W C K,M M49464W01680-C--H W C D K,M M49464W01750-C--H W C D K,M M49464W01820-C--H W C D K,M M49464W01910-C--H W D E K,M M49464W01101-C--H W D E F K,M M49464W01121-C--H W E F G K,M M49464W01151-C--H W E F G H K,M M49464W01181-C--H W F G H K,M M49464W01201-C--H W G H K,M M49464W01221-C--H W G H J K,M M49464W01241-C--H W G H J K,M M49464W01271-C--H W G H J K,M M49464W01301-C--H W H J K,M M49464W01331-C--H W H J K K,M M49464W01361-C--H W J K K,M M49464W01391-C--H W J K K,M M49464W01431-C--H W J K K,M M49464W01471-CK-H W K K,M M49464W01510-CK-H W K K,M M49464W01561-CK-H W K K,M M49464W01621-CK-H W K K,M M49464W01150-DC-H W C K,M M49464W01180-D--H W C D K,M M49464W01200-D--H W C D K,M M49464W01220-D--H W C D E K,M M49464W01240-D--H W C D E F K,M M49464W01270-D--H W C D E F K,M M49464W01300-D--H W C D E F G K,M M49464W01330-D--H W C D E F G H K,M M49464W01360-D--H W C D E F G H K,M M49464W01390-D--H W C D E F G H K,M M49464W01430-D--H W C D E F G H K,M M49464W01470-D--H W C D E F G H K,M M49464W01510-D--H W D E F G H J K,M M49464W01560-D--H W D E F G H J K,M M49464W01620-D--H W D E F G H J K,M M49464W01680-D--H W E F G H J K,M M49464W01750-D--H W E F G H J K K,M M49464W01820-D--H W E F G H J K K,M M49464W01910-D--H W F G H J K K,M M49464W01101-D--H W G H J K K,M See footnotes at end of table. 7
8 TABLE III. Temperature coefficient W capacitor characteristics. Continued. M49464W01121-D--H W H J K K,M M49464W01151-D--H W J K K,M M49464W01181-D--H W J K K,M M49464W01201-D--H W J K K,M M49464W01221-DK-H W K K,M M49464W01241-DK-H W K K,M M49464W01271-DK-H W K K,M M49464W01301-DK-H W K K,M 1/ Complete PIN shall include additional symbols to indicate capacitance tolerance, case code (where several case codes are available), termination configuration code (A, B, or C), and failure rate level (M, P, R, or S). Changes from previous issue. The margins of this specification are marked with vertical lines to indicate where changes from the previous issue were made. This was done as a convenience only and the Government assumes no liability whatsoever for any inaccuracies in these notations. Bidders and contractors are cautioned to evaluate the requirements of this document based on the entire content irrespective of the marginal notations and relationship to the last previous issue. Custodians: Preparing activity: Army - CR DLA - CC Navy - EC Air Force - 85 (Project ) DLA - CC NASA - NA Review activities: Army - AT, AV, MI Navy - AS, MC Air Force - 19, 99 NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at 8
PERFORMANCE SPECIFICATION SHEET
INCH-POUND MIL-PRF-39003/1H 17 May 1996 SUPERSEDING MIL-PRF-39003/1G 31 January 1992 PERFORMANCE SPECIFICATION SHEET CAPACITOR, FIXED, ELECTROLYTIC (SOLID ELECTROLYTE), TANTALUM (POLARIZED, SINTERED SLUG),
PERFORMANCE SPECIFICATION SHEET SWITCHES, THERMOSTATIC, (BIMETALLIC), TYPE I, SINGLE POLE, SINGLE THROW (SPST), 5 AMPERES
INCH-POUND MIL-PRF-24236/2J 17 April 2018 SUPERSEDING MIL-PRF-24236/2J w/amendment 2 10 January 2017 PERFORMANCE SPECIFICATION SHEET SWITCHES, THERMOSTATIC, (BIMETALLIC), TYPE I, SINGLE POLE, SINGLE THROW
DETAIL SPECIFICATION SHEET
INCH POUND MIL DTL 28803/1E 1 September 2018 SUPERSEDING MIL D 28803/1E 4 September 2013 DETAIL SPECIFICATION SHEET DISPLAY, OPTOELECTRONIC, SEGMENTED READOUT, BACKLIGHTED, STYLE II (LIGHT EMITTING DIODE),
PERFORMANCE SPECIFICATION SHEET
INCH-POUND MIL-PRF-22885/77F 2 August 2018 SUPERSEDING MIL-PRF-22885/77E 25 April 2013 PERFORMANCE SPECIFICATION SHEET SWITCHES, PUSH BUTTON, ILLUMINATED, 4-LAMP, 0.75 SQUARE, 7.5 AMPERES, AND LOW LEVEL
PERFORMANCE SPECIFICATION SHEET TRANSFORMERS, AUDIO FREQUENCY, ULTRA-MINIATURE
INCH-POUND September 00 SUPERSEDING MIL-PRF-7/7B 1 June 88 PERFORMNCE SPECIFICTION SHEET TRNSFORMERS, UDIO FREQUENCY, ULTR-MINITURE This specification is approved for use by all Departments and gencies
DEPARTMENT OF DEFENSE TEST METHOD STANDARD METHOD 304, RESISTANCE-TEMPERATURE CHARACTERISTIC
INCH-POUND MIL-STD-202-304 18 April 2015 SUPERSEDING MIL-STD-202G w/change 2 (IN PART) 28 June 2013 (see 6.1) DEPARTMENT OF DEFENSE TEST METHOD STANDARD METHOD 304, RESISTANCE-TEMPERATURE CHARACTERISTIC
MILITARY SPECIFICATION MICROCIRCUITS, DIGITAL, BIPOLAR, SCHOTTKY TTL, FLIP-FLOPS, CASCADABLE, MONOLITHIC SILICON
INCH-POUND 2 November 2005 SUPERSEDING MIL-M-38510/71C 23 July 1984 MILITARY SPECIFICATION MICROCIRCUITS, DIGITAL, BIPOLAR, SCHOTTKY TTL, FLIP-FLOPS, CASCADABLE, MONOLITHIC SILICON This specification is
MILITARY SPECIFICATION MICROCIRCUITS, LINEAR, LOW OFFSET OPERATIONAL AMPLIFIERS, MONOLITHIC SILICON
INCH-POUND MIL-M-38510/135G 22 March 2010 SUPERSEDING MIL-M-38510/135F 8 April 2008 MILITARY SPECIFICATION MICROCIRCUITS, LINEAR, LOW OFFSET OPERATIONAL AMPLIFIERS, MONOLITHIC SILICON Reactivated after
MILITARY SPECIFICATION MICROCIRCUITS, DIGITAL, BIPOLAR, TTL, DECODERS MONOLITHIC SILICON. Inactive for new design after 7 September 1995.
INCH-POUND 16 February 2005 SUPERSEDING MIL-M-38510/10C 3 March 1986 MILITARY SPECIFICATION MICROCIRCUITS, DIGITAL, BIPOLAR, TTL, DECODERS MONOLITHIC SILICON This specification is approved for use by all
MICROCIRCUITS, DIGITAL, TTL, FLIP-FLOPS, MONOLITHIC SILICON. Inactive for new design after 7 September 1995
MILITARY SPECIFICATION INCH-POUND MIL-M-38510/2G 8 February 2005 SUPERSEDING MIL-M-38510/2E 24 December 1974 MIL-M-0038510/2F (USAF) 24 OCTOBER 1975 MICROCIRCUITS, DIGITAL, TTL, FLIP-FLOPS, MONOLITHIC
MILITARY SPECIFICATION MICROCIRCUITS, DIGITAL, BIPOLAR, TTL, MONOSTABLE MULTIVIBRATORS, MONOLITHIC SILICON
INCH-POUND MIL-M-38510/12J 22 February 2005 SUPERSEDING MIL-M-38510/12H 16 December 2003 MILITARY SPECIFICATION MICROCIRCUITS, DIGITAL, BIPOLAR, TTL, MONOSTABLE MULTIVIBRATORS, MONOLITHIC SILICON This
MICROCIRCUITS, DIGITAL, LOW-POWER SCHOTTKY TTL, COUNTERS, MONOLITHIC SILICON. Inactive for new design after 18 April 1997.
INCH-POUND MIL-M-38510/315D 27 October 2003 SUPERSEDING MIL-M-38510/315C 17 JANUARY 1984 MILITARY SPECIFICATION MICROCIRCUITS, DIGITAL, LOW-POWER SCHOTTKY TTL, COUNTERS, MONOLITHIC SILICON This specification
MILITARY SPECIFICATION MICROCIRCUITS, LINEAR, CMOS/ANALOG MULTIPLEXERS/DEMULTIPLEXERS WITH OVERVOLTAGE PROTECTION, MONOLITHIC SILICON, POSITIVE LOGIC
INCH-POUND 12 October 2005 SUPERSEDING MIL-M-38510/190C 22 October 1986 MILITARY SPECIFICATION MICROCIRCUITS, LINEAR, CMOS/ANALOG MULTIPLEXERS/DEMULTIPLEXERS WITH OVERVOLTAGE PROTECTION, MONOLITHIC SILICON,
REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED. A Update to current requirements. Editorial changes throughout. - gap Raymond Monnin
REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED A Update to current requirements. Editorial changes throughout. - gap 06-10-05 Raymond Monnin Remove class M references. Update drawing to current MIL-PRF-38535
PERFORMANCE SPECIFICATION SHEET
The documentation and process conversion measures necessary to comply with this revision shall be completed by 21 August 2010. INCH-POUND MIL-PRF-19500/749B 21 May 2010 SUPERSEDING MIL-PRF-19500/749A 16
MICROCIRCUITS, DIGITAL, BIPOLAR LOW-POWER SCHOTTKY TTL, FLIP-FLOPS, CASCADABLE, MONOLITHIC SILICON. Inactive for new design after 18 April 1997.
INCH-POUND MIL-M-38510/301F 4 March 2004 SUPERSEDING MIL-M-38510/301E 14 February 2003 MILITARY SPECIFICATION MICROCIRCUITS, DIGITAL, BIPOLAR LOW-POWER SCHOTTKY TTL, FLIP-FLOPS, CASCADABLE, MONOLITHIC
MICROCIRCUITS, DIGITAL, BIPOLAR, ADVANCED SCHOTTKY TTL, DECADE COUNTERS, MONOLITHIC SILICON
INCH-POUND MIL-M-38510/344A 14 April 2004 SUPERSEDING MIL-M-38510/344 12 June 1986 MILITARY SPECIFICATION MICROCIRCUITS, DIGITAL, BIPOLAR, ADVANCED SCHOTTKY TTL, DECADE COUNTERS, MONOLITHIC SILICON This
PERFORMANCE SPECIFICATION SHEET
INCH-POUND MIL-PRF-22885/90C 17 MARCH 1999 SUPERSEDING MIL-S-22885/90B 23 June 1989 PERFORMANCE SPECIFICATION SHEET SWITCH, PUSHBUTTON, ILLUMINATED, 4-LAMP 0.750 SQUARE, LOW LEVEL TO 7 AMPERES, (DRIPPROOF,
PERFORMANCE SPECIFICATION SHEET
The documentation and process conversion measures necessary to comply with this revision shall be completed by 24 September 2011. PERFORMANCE SPECIFICATION SHEET INCH-POUND MIL-PRF-19500/746B 24 June 2011
REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED REV SHEET REV SHEET 15 REV STATUS OF SHEETS SHEET
REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED REV REV 15 REV STATUS REV OF S 1 2 3 4 5 6 7 8 9 10 11 12 13 14 PMIC N/A MICROCIRCUIT DRAWING PREPARED BY Greg Cecil CHECKED BY Greg Cecil http://www.landandmaritime.dla.mil/
page 1 Total ( )
A B C D E F Costs budget of [Claimant / Defendant] dated [ ] Estimated page 1 Work done / to be done Pre-action Disbs ( ) Time ( ) Disbs ( ) Time ( ) Total ( ) 1 Issue /statements of case 0.00 0.00 CMC
PERFORMANCE SPECIFICATION SHEET
INCH-POUND MIL-PRF-64266/21 w/ AMENDMENT 1 1 December 2014 MIL-PRF-64266/21 6 November 2013 PERFORMANCE SPECIFICATION SHEET CONNECTORS, FIBER OPTIC, CIRCULAR, PLUG AND RECEPTACLE STYLE, MULTIPLE REMOVABLE
Reactivated after 17 Jan and may be used for new and existing designs and acquisitions.
C-POUND MI-M-38510/653 17 January 2006 SUPERSEDG MI-M-38510/653 15 January 1988 MIITRY SPECIFICTION MICROCIRCUITS, DIGIT, IG-SPEED CMOS, FIP-FOPS, MONOITIC SIICON, POSITIVE OGIC This specification is approved
STANDARD MICROCIRCUIT DRAWING MICROCIRCUIT, LINEAR, PRECISION TIMER, MONOLITHIC SILICON
REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED REV REV 15 16 17 REV STATUS REV OF S 1 2 3 4 5 6 7 8 9 10 11 12 13 14 PMIC N/A MICROCIRCUIT DRAWING THIS DRAWING IS AVAILABLE FOR USE BY ALL DEPARTMENTS
PERFORMANCE SPECIFICATION SHEET
The documentation and process conversion measures necessary to comply with this document shall be completed by 16 May 2013. INCH-POUND 16 February 2013 SUPERSEDING MIL-PRF-19500/291T 23 September 2011
PERFORMANCE SPECIFICATION
INCH-POUND MIL-PRF-32535A 31 October 2017 SUPERSEDING MIL-PRF-32535 28 September 2015 1. SCOPE PERFORMANCE SPECIFICATION CAPACITOR, CHIP, FIXED, CERAMIC DIELECTRIC (TEMPERATURE STABLE AND GENERAL PURPOSE),
PERFORMANCE SPECIFICATION SHEET
The documentation and process conversion measures necessary to comply with this document shall be completed by 22 May 2013. INCH-POUND MIL-PRF-19500/255Y 22 February 2013 SUPERSEDING MIL-PRF-19500/255X
PERFORMANCE SPECIFICATION SHEET
The documentation and process conversion measures necessary to comply with this document shall be completed by 6 August 203. INCH-POUND 6 May 203 SUPERSEDING MIL-PRF-9500/357L 7 July 200 PERFORMANCE SPECIFICATION
Parts Manual. EPIC II Critical Care Bed REF 2031
EPIC II Critical Care Bed REF 2031 Parts Manual For parts or technical assistance call: USA: 1-800-327-0770 2013/05 B.0 2031-109-006 REV B www.stryker.com Table of Contents English Product Labels... 4
MILITARY SPECIFICATION MICROCIRCUITS, DIGITAL, CMOS, STATIC SHIFT REGISTER, MONOLITHIC SILICON, POSITIVE LOGIC
MIITARY SPECIFICATION MICROCIRCUITS, DIGITA, CMOS, STATIC SIFT REGISTER, MONOITIC SIICON, POSITIVE OGIC This specification is approved for use by all Departments and Agencies of the Department of Defense.
PERFORMANCE SPECIFICATION SHEET
INCH-POUND MIL-PRF-64266/13A w/ Amendment 1 1 December 2014 SUPERSEDING MIL-PRF-64266/13A 15 October 2013 PERFORMANCE SPECIFICATION SHEET CONNECTORS, FIBER OPTIC, CIRCULAR, PLUG AND RECEPTACLE STYLE, MULTIPLE
Surface Mount Multilayer Ceramic Chip Capacitors DSCC Qualified Type 05007
Surface Mount Multilayer Ceramic Chip Capacitors DSCC Qualified Type 05007 FEATURES US defense supply center approved Federal stock control number, Available CAGE CODE 2770A Available Case size 1206 Stable
REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED
REVISIONS LTR DESRIPTION DATE (YR-MO-DA) APPROVED A Add conditions of I R = 15 ma for subgroups 2, 3 and make limit changes to the V R / T test as specified under Table I. - ro 11-03-24. SAFFLE B Add device
REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED. A Changes in accordance with N.O.R R M. A. FRYE
RVISIONS LTR DSCRIPTION DAT (YR-MO-DA) APPROVD A Changes in accordance with N.O.R. 5962-R163-92. 92-03-26 M. A. FRY B Changes in accordance with N.O.R. 5962-R228-94. 94-07-27 M. A. FRY C Drawing updated
Single Layer Parallel Plate Chip Capacitors. for 21st Century Applications
Single Layer Parallel Plate Chip Capacitors for st Century Applications Catalogue of Standard Sizes, Values, and Configurations for Class and Ceramic Dielectrics Table of Contents 3 Capacitor Design Styles
BCW61..., BCX71... PNP Silicon AF Transistors. For AF input stages and driver applications High current gain Low collector-emitter saturation voltage
PNP Silicon AF Transistors For AF input stages and driver applications High current gain Low collectoremitter saturation voltage Low noise between Hz and khz Complementary types: BCW6, BCX7 (NPN) Pbfree
Single Layer Parallel Plate Chip Capacitors
Single Layer Parallel Plate Chip Capacitors for st Century Applications Catalogue of Standard Sizes, Values, and Configurations for Class and Ceramic Dielectrics Table of Contents 3 Capacitor Design Styles
Capacitor Technology and Manufacturing Expertise
Capacitors Capacitor Technology and Manufacturing Expertise With more than 25 years of experience in manufacturing single layer capacitors made with EIA Class I, II and III ceramic dielectric materials,
Aluminum Capacitors FEATURES APPLICATIONS PACKAGING
Aluminum Capacitors QUICK REFERENCE DATA DESCRIPTION VALUE Nominal case size (Ø D x L in mm) 4 x 5.3 to 12.5 x 13.5 Rated capacitance range, 10 μf to 2200 μf Capacitance tolerance ± 20 % Rated voltage
MULTILAYER CERAMIC CAPACITORS/AXIAL & RADIAL LEADED
MULTILAYER CERAMIC CAPACITORS/AXIAL & RADIAL LEADED Multilayer ceramic capacitors are available in a variety of physical sizes and configurations, including leaded devices and surface mounted chips. Leaded
REVISIONS SYMBOL DESCRIPTION DATE APPROVAL - A
REVISIONS SYMBOL DESCRIPTION DATE APPROVAL - A B C D E F Initial Release Revised numbering scheme, separated electrical and mechanical, editorial changes throughout Corrected typographical errors in PIN
Reactivated after 10 Aug and may be used for new and existing designs and acquisitions.
INC-POUND 10 August 2004 SUPERSEDING MI-M-38510/175B 30 April 1984 MIITARY SPECIFICATION MICROCIRCUITS, DIGITA, CMOS, POSITIVE OGIC, FIP-FOPS AND MONOSTABE MUTIVIBRATOR, MONOITIC SIICON Reactivated after
REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED. A Drawing updated to reflect current requirements R. MONNIN
REVISIONS LTR DESRIPTION DATE (YR-MO-DA) APPROVED A Drawing updated to reflect current requirements. 02-11-20 R. MONNIN B Part of 5 year review update. -rrp 09-06-20 J. RODENBEK Update document paragraphs
Quality and Reliability Report
Quality and Reliability Report GaAs Schottky Diode Products 051-06444 rev C Marki Microwave Inc. 215 Vineyard Court, Morgan Hill, CA 95037 Phone: (408) 778-4200 / FAX: (408) 778-4300 Email: info@markimicrowave.com
APPLICATION NOTES FOR MULTILAYER CERAMIC CAPACITORS
APPLICATION NOTES FOR MULTILAYER CERAMIC CAPITORS ELECTRICAL CHARTERISTICS The fundamental electrical properties of multilayer ceramic capacitors are as follows: Polarity: Multilayer ceramic capacitors
CB Series Tantalum Capacitor
Features: Lead-Free Specially designed of general purpose Highly reliable resin dipped type Excellent frequency and temperature characteristics Non-flammable epoxy resin Technical Specifications: Item
MILITARY SPECIFICATION MICROCIRCUITS, LINEAR, 8 BIT, DIGITAL-TO-ANALOG CONVERTERS, MONOLITHIC SILICON
NCHPOUND October, 2011 SUPERSEDNG MLM8510/11B 21 June 2005 MLTARY SPECFCATON MCROCRCUTS, LNEAR, 8 BT, DGTALTOANALOG CONVERTERS, MONOLTHC SLCON This specification is approved for use by all Departments
STANDARD MICROCIRCUIT DRAWING MICROCIRCUIT, LINEAR, 4-CHANNEL DIFFERENTIAL, ANALOG MULTIPLEXER, MONOLITHIC SILICON
REVISIONS LTR DESCRIPTION DTE (YR-MO-D) PPROVED Update boilerplate paragraphs to current MIL-PRF-38535 requirements. Delete references to device class M requirements. - ro 12-10-29 C. SFFLE REV REV REV
SECURITIES AND EXCHANGE COMMISSION FORM 10-D. Filing Date: Period of Report: SEC Accession No
SECURITIES AND EXCHANGE COMMISSION FORM 10-D Periodic distribution reports by Asset-Backed issuers pursuant to Rule 13a-17 or 15d-17 Filing Date: 2007-12-06 Period of Report: 2007-11-26 SEC Accession No.
Surface Mount Multilayer Ceramic Chip Capacitors for Ultra Small Commodity Applications
Surface Mount Multilayer Ceramic Chip Capacitors for Ultra Small Commodity Applications FEATURES High capacitance in unit size High precision dimensional tolerances Suitably used in high-accuracy automatic
Metallized PPS Capacitors for extreme capacitance stability. 1 min / 23 C B
Replaces CKM 501 B series Applications & Characteristics Railway signalling High-temperature (125 C) High capacitance stability Harmonized circuits Filtering High-reliability circuits Security applications
AK AJ AT AR DETAIL "A" N M L K B AB (6 PLACES) DETAIL "B" TH1 (11) TH2 (10) NTC *ALL PIN DIMENSIONS WITHIN A TOLERANCE OF ±0.5
Powerex, Inc., 73 Pavilion Lane, Youngwood, Pennsylvania 5697 (724) 925-7272 www.pwrx.com Six IGBTMOD + Brake NX-S Series Module AH AN AC AD AE H AK AJ A D E F G AK AJ AP AT AR AQ AS C AX BB BC BD DETAIL
REVISIONS SYMBOL DESCRIPTION DATE APPROVAL
REVISIONS SYMBOL DESCRIPTION DATE APPROVAL - A Initial Release Revised per RN A-159 03/11/2008 07/17/2009 JS SHEET REVISION STATUS SH 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 REV A A A A A A
REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED. C Update boilerplate paragraph to current MIL-PRF requirements. - ro C.
REVISIONS LTR DESRIPTION DATE (YR-MO-DA) APPROVED A B Add device types 04, 05, and 06. Add case outlines D and H. Make changes to 1.3, table I, and figure 1. Replaced reference to MIL-STD-973 with reference
REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED R. HEBER devices back to the document. - ro
REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED A B Change the location of footnote 2/ under Table IIA in accordance with N.O.R. 5962-R038-97. Add case outline X, paragraph 1.5, and radiation hardened
Ceramic Chip Capacitors
Version 17.11 Ceramic Chip Capacitors Table of Contents How to Order - AVX Part Number Explanation...2-3 C0G (NP0) General Specifications...4 Specifications and Test Methods...5 Range...6-7 U RF/Microwave
Ceramic Disc Capacitors Class 1, 3 kv DC
S Series Ceramic Disc Capacitors D D FEATURES Low losses High stability Tangent line SH Tangent line SH High capacitance in small size Kinked (preferred) or straight leads Compliant to RoHS directive 2002/095/EC
MILITARY SPECIFICATION MICROCIRCUITS, DIGITAL, CMOS 4096 BIT STATIC RANDOM ACCESS MEMORY (RAM) MONOLITHIC SILICON
INCH POUND 23 JANUARY 2006 SUPERSEDING MIL-M-38510/289 4 DECEMBER 1986 MILITARY SPECIFICATION MICROCIRCUITS, DIGITAL, CMOS 4096 BIT STATIC RANDOM ACCESS MEMORY (RAM) MONOLITHIC SILICON This specification
Multilayer Chip Ceramic Capacitor Shanghai Green Tech Co.,Ltd. (MLCC)
(MLCC) Types of Dielectric Material and Capacitor HIGH FREQUENCY TYPE: The capacitor of this kind dielectric material is considered as ClassⅠcapacitor, including high frequency COG(NP0) capacitor and temperature
Surface Mount Multilayer Ceramic Chip Capacitors for High Q Commodity Applications
VJ...WBC High Q Dielectric Surface Mount Multilayer Ceramic Chip Capacitors for High Q Commodity Applications ELECTRICAL SPECIFICATIONS Note Electrical characteristics at 25 C, 30 % to 70 % related humidity,
Thin Film Passive Components
Thin Film Passive Components TECDIA Co., Ltd. www.tecdia.com 28.OCT) B-28- Table of Contents Single Layer Capacitors Table of Contents.................................................................................
Non Magnetic Chip C0G & X7R
Non Magnetic Chip CG & X7R This range of MLC chip capacitors that are completely non magnetic. They are designed to operate in non magnetic environments such as Magnetic Resonance Imaging (MRI) and Nuclear
FEATURES. Note 138D 306 X0 006 C 2 E3 MODEL CAPACITANCE CAPACITANCE TOLERANCE DC VOLTAGE RATING AT +85 C
Wet Tantalum Capacitors Silver Case TANTALEX Capacitors Hermetically-Sealed FEURES Terminations: axial, standard tin / lead (SnPb), 100 % tin (RoHS-compliant) available Available Model is the commercial
PERFORMANCE SPECIFICATION CAPACITORS, FIXED, CERAMIC DIELECTRIC, HIGH RELIABILITY, DISCOIDAL, GENERAL SPECIFICATION FOR
INCH-POUND 3 November 2003 SUPERSEDING MIL-PRF-31033 9 August 1996 PERFORMANCE SPECIFICATION CAPACITORS, FIXED, CERAMIC DIELECTRIC, HIGH RELIABILITY, DISCOIDAL, GENERAL SPECIFICATION FOR This specification
CERAMIC CONFORMALLY COATED/AXIAL
CERAMIC CONFORMALLY COATED/AXIAL AXIMAX & GOLD MAX GENERAL SPECIFICATIONS Working Voltage: Axial (WVDC) C0G 50, 100, 200 X7R 25, 50, 100, 200, 250 Z5U 50, 100 Radial (WVDC) C0G 50, 100, 200, 500, 1k, 1.5k,
DATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose & High capacitance Class 2, X5R
Product Specification DATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose & High capacitance Class 2, 4 V TO 50 V 100 pf to 220 µf RoHS compliant & Halogen free Product specification
Surface Mount Multilayer Ceramic Capacitors for Pulse Current Applications
Surface Mount Multilayer Ceramic Capacitors for Pulse Current Applications ELECTRICAL SPECIFICATIONS Note Electrical characteristics at +25 C unless otherwise specified FEATURES Low electrostrictive ceramic
Chapter 30 Design and Analysis of
Chapter 30 Design and Analysis of 2 k DOEs Introduction This chapter describes design alternatives and analysis techniques for conducting a DOE. Tables M1 to M5 in Appendix E can be used to create test
NVLAP Proficiency Test Round 14 Results. Rolf Bergman CORM 16 May 2016
NVLAP Proficiency Test Round 14 Results Rolf Bergman CORM 16 May 2016 Outline PT 14 Structure Lamp Types Lab Participation Format for results PT 14 Analysis Average values of labs Average values of lamps
Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications
Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications ELECTRICAL SPECIFICATIONS X7R GENERAL SPECIFICATION Note Electrical characteristics at +25 C unless otherwise specified
REVISIONS LTR DESCRIPTION DATE (YR-MO-DA) APPROVED. A Delete all match referenced tests as specified under Table I. - ro C.
REVISIONS LTR DESCRIPTION DTE (YR-MO-D) PPROVED Delete all match referenced tests as specified under Table I. - ro 16-04-04 C. SFFLE REV REV REV STTUS REV OF S 1 2 3 4 5 6 7 8 9 10 11 12 13 14 PMIC N/
Cedar Millwork Products
1 BUILD SOME CHARACTER Edmund Allen s Cedar millwork products will set your design apart by adding the beauty, warmth, elegance of design, and functionality only natural Western Red Cedar can provide.
Overview. Benefits. Applications
KPS-MCC High Temperature 200 C SMPS Stacks 50 2,000 VDC (Industrial Grade) Overview KEMET Power Solutions - Military Case Code (KPS-MCC) High Temperature SMPS Ceramic Stacked Capacitors combine a robust
Solid Tantalum SMD Capacitors TANTAMOUNT, Hi-Rel COTS, Low ESR, Metal Case
Solid Tantalum SMD Capacitors TANTAMOUNT, Hi-Rel COTS, Low ESR, Metal Case PERFORMANCE CHARACTERISTICS Operating Temperature: -55 C to +125 C (above 85 C, voltage derating is required) Capacitance Range:
Failure Rate 4 = Automotive
Automotive MLCC Automotive GENERAL DESCRIPTION AVX Corporation has supported the Automotive Industry requirements for Multilayer Ceramic Capacitors consistently for more than 10 years. Products have been
Solid Tantalum Chip Capacitors, TANTAMOUNT, Conformal Coated, Maximum CV, Low ESR
Solid Tantalum Chip Capacitors, TANTAMOUNT, Conformal Coated, Maximum CV, Low FEATURES Large capacitance rating range Mounting: Surface mount Lowest for a surface mount tantalum chip capacitor Terminations:
Multilayer Ceramic Capacitors Leaded Capacitors. Packaging. Internal coding. Capacitance tolerance
Leaded Capacitors Leaded Ordering code system B37979N 1 100 K 0 54 Packaging 51 ^ cardboard tape, reel packing (360-mm reel) 54 ^ Ammo packing (standard) 00 ^ bulk Internal coding Capacitance tolerance
Failure Rate 4 = Automotive
Automotive MLCC Automotive GENERAL DESCRIPTION AVX Corporation has supported the Automotive Industry requirements for Multilayer Ceramic Capacitors consistently for more than 10 years. Products have been
DATA SHEET. Radial series Leaded ceramic multilayer capacitors. BCE Sud Passive Components Oct 16
DATA SEET File under BCE Sud Passive Components, 2003 Oct 16 BCE Sud Passive Components A former part of Philips Components FEATURES Very high capacitance per unit volume Low cost. APPLICATIONS These conformally
Datasheet. Standard Products ACT Channel Analog Multiplexer Module Radiation Tolerant & ESD Protected
Standard Products ACT8500 64-Channel Analog Multiplexer Module Radiation Tolerant & ESD Protected www.aeroflex.com/mux May 5, 2014 FEATURES 64-Channels provided by six -channel multiplexers Radiation performance
Multilayer Ceramic Capacitors Y5V
Multilayer Ceramic Capacitors Features Miniature size Wide capacitance, TC, voltage and tolerance range Industry standard sizes Available for wave, reflow or vapor phase solder How to Order 0805 F 104
DATASHEET HS Features. Pinouts. ARINC 429 Bus Interface Line Driver Circuit. FN2963 Rev 3.00 Page 1 of 7. May 30, FN2963 Rev 3.
DATASHEET ARI 429 Bus Interface Line Driver Circuit FN2963 Rev 3.00 The is a monolithic dielectric ally isolated bipolar differential line driver designed to meet the specifications of ARI 429. This device
STANDARD MICROCIRCUIT DRAWING MICROCIRCUIT, LINEAR, CMOS 8-BIT DAC WITH OUTPUT AMPLIFIER, MONOLITHIC SILICON
REVISIONS LTR DESCRIPTION DTE (YR-MO-D) PPROVED Drawing updated to reflect current requirements. - ro 03-01-28 R. MONNIN REV REV REV STTUS REV OF S 1 2 3 4 5 6 7 8 9 10 11 12 PMIC N/ STNDRD MICROCIRCUIT
Surface Mount Multilayer Ceramic Chip Capacitors Prohibit Surface Arc-Over in High-Voltage Applications
Surface Mount Multilayer Ceramic Chip Capacitors Prohibit Surface Arc-Over in High-Voltage Applications ELECTRICAL SPECIFICATIONS FEATURES For this Worldwide Patented Technology Specialty: high-voltage
POWER FACTOR CORRECTION CAPACITOR CELLS SPECIFICATIONS
SPECIFICATIONS DESCRIPTION Metallized polypropylene capacitors offer improved performance and proven reliability in applications requiring power factor correction or harmonic filtering. Metallized polypropylene
Surface Mount Multilayer Ceramic Chip Capacitors with Integrated Resistor for High Pulse Current Applications
Surface Mount Multilayer Ceramic Chip Capacitors with Integrated Resistor for High Pulse Current Applications FEATURES Integrated resistor on the surface of the Available capacitor Low electrostrictive
Commercial Chip - C0G 16Vdc to 10kVdc
Commercial Chip - CG 16Vdc to 1kVdc A range of commercial MLC chip capacitors in Ultra stable EIA Class I CG, or NP, dielectric. CG chips are used in precision circuitry requiring Class I stability and
Ceramic Disc DC Capacitors Class 2, Low Loss 500 V, 1 kv, 2 kv and 3 kv
Ceramic Disc DC Capacitors Class 2, tangent line D SH FEATURES High reliability Low losses High capacitance in small size Kinked leads Compliant to RoHS directive 2002/95/EC F Capacitors with inside kink
Tantalum Through-Hole Capacitors Molded Radial T370 & T378 Micron MIL-PRF-49137/6 (CX06 Style) Applications
Overview The KEMET T370 and T378 Micron MIL-PRF-49137/6 (CX06 Style) capacitors are available in a variety of case styles and sizes. These capacitors are designed to operate from 55 C to +85 C at full
THE TRANSLATION PLANES OF ORDER 49 AND THEIR AUTOMORPHISM GROUPS
MATHEMATICS OF COMPUTATION Volume 67, Number 223, July 1998, Pages 1207 1224 S 0025-5718(98)00961-2 THE TRANSLATION PLANES OF ORDER 49 AND THEIR AUTOMORPHISM GROUPS C. CHARNES AND U. DEMPWOLFF Abstract.
Multilayer Ceramic Capacitors X7R
Features Miniature size Wide capacitance, TC, voltage and tolerance range Industry standard sizes Available for wave, reflow or vapor phase solder How to Order 0805 104 K 500 N T A C D E F G A C Size Code
Multi Layer Ceramic Capacitor
Description MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. POE s MLCC
I INCH- POUND j MIL-STD-1399(NAVY SECTION 302A 29 February 1988 SUPERSEDING DOD-STD-1399(NAVY) SECTION March 1972 (See 6.3) MILITARY STANDARD
I INCH- POUND j MIL-STD-1399(NAVY SUPERSEDING DOD-STD-1399(NAVY) SECTION 302 20 March 1972 (See 6.3) MILITARY STANDARD INTERFACE STANDARD FOR SHIPBOARD SYSTEMS SECTION 302 WEATHER ENVIRONMENT AMSC N/A
Wet Tantalum Capacitors, High Energy, Ultra High Capacitance, -55 C to +125 C Operation
Wet Tantalum Capacitors, High Energy, Ultra High Capacitance, -55 C to +125 C Operation FEATURES High energy, very high capacitance design All tantalum, hermetically sealed case Available Utilizes proven
Datasheet. Standard Products ACT Channel Analog Multiplexer Module Radiation Tolerant
Standard Products ACT8506 48-Channel Analog Multiplexer Module Radiation Tolerant www.aeroflex.com/mux May 5, 2014 Datasheet FEATURES 48 channels provided by six 16-channel multiplexers Radiation performance
100 pf to 47µF RoHS compliant & Halogen free
Product Specification August 7, 2017 V.4 DATA SHEET SURFACE MOUNT MULTILAYER CERAMIC CAPACITORS General purpose class II X6S 4 V TO 50 V 0 pf to 47µF RoHS compliant & Halogen free 2 SCOPE This specification
CB Series Tantalum Capacitor
Features: Lead-Free Specially designed of general purpose Highly reliable resin dipped type Excellent frequency and temperature characteristics Non-flammable epoxy resin Technical Specifications: Item
B Multilayer Ceramic Capacitor
B INTRODUCTION ( ) TYPES OF DIELECTRIC MATERIAL AND CAPACITOR ( ) *HIGH FREQUENCY TYPE: The capacitor of this kind dielectric material is considered as Class capacitor, including high frequency COG capacitor
Metallized Polypropylene Capacitor, Mini-Version (-M) Related Document: CECC
MKP 840.../...-M Metallized Polypropylene Capacitor, Mini-Version (-M) Related Document: CECC 00 0.6 pcm ± 0.4 Dimensions in millimeters MAIN APPLICATIONS High frequency and pulse operations. Deflection
Axial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 50 V DC, 100 V DC, 200 V DC
Axial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 50 V DC, 100 V DC, 200 V DC FEATURES AEC-Q200 qualified with PPAP available High reliability MLCC insert with