Thermodynamics 1 Lecture Note 1
|
|
- Elinor Lyons
- 5 years ago
- Views:
Transcription
1 Thermodynamics 1 Lecture Note 1 March 02, 2015 Kwang Kim Yonsei University kbkim@yonsei.ac.kr Y O N Se I
2 Scientific Thinking - System under investigation - Description or Behavior of a system - Variables of a system - Correlation between behavior and variables of a system - Modeling of a system - Comparison of a model with a system - Revision of a model
3 Three NO S in class 1) No Sleep 2) No Silence, Active Class Participation 3) No Smile when asked questions
4 Material Science and Engineering (MSE) Final materials must perform a given task in an economical and societally acceptable manner Synthesis/ Processing Performance Composition/ Structure result of synthesis and processing Properties and performance : related to composition and structure Properties Properties governed by composition and structure
5 Scientific Thinking - System under investigation Gas in a balloon - Description or Behavior of a system
6 Scientific Thinking - System under investigation Which gas? Amount of a gas? Gas in a balloon Pressure? Volume? Temperature? Density? - Description or Behavior of a system
7 Chapter 1 : Properties of gases - Ideal gas : PV = nrt - Real gas : molecular interaction - Non-ideality of real gas - Deviation of real gas from ideal gas - Quantifying non-ideality - Van der Walls equation describing a non-ideal gas - Check how well Van der Walls equation describe a real gas behavior
8 Scientific Thinking - System under investigation : gas in a balloon - Description or Behavior of a system : Energy U, H, A, G Variables of a system : P, V, T - Correlation between behavior and variables of a system : T vs P, T vs. V, V vs. P - Modeling of a system : Mathematical expression for an ideal gas, Mathematical expression for a real gas - Comparison of a model with a system : Deviation of real gas from ideal gas - Revision of a model : More refined model for a real gas
9 Correlation between behavior and variables of a system Cause and Effect y = F(x) ; y is a function of x, x : controlled variable, y : observed variable
10 System - a part of the universe of interest to me - surrounded by the boundary to separate from the rest of the universe, called surroundings - Any interactions between the system and the surroundings? - What is exchanged between the system and the surroundings? - Any changes in the system due to the interactions and exchanges? - How do we describe these changes in a system with the interactions and exchanges?
11 System System / Boundary / Surroundings Open System Closed System Isolated System
12 Open System
13 Closed System
14 Isolated System
15 System - a part of the universe of interest to me - surrounded by the boundary to separate from the rest of the universe, called surroundings - Any interactions between the system and the surroundings? - What is exchanged between the system and the surroundings? - Any changes in the system due to the interactions and exchanges? - How do we describe these changes in a system with the interactions and exchanges?
16 Scientific Thinking - System under investigation : gas in a balloon - Description or Behavior of a system : Energy U, H, A, G Variables of a system : P, V, T - Correlation between behavior and variables of a system : T vs P, T vs. V, V vs. P - Modeling of a system : Mathematical expression for an ideal gas, Mathematical expression for a real gas - Comparison of a model with a system : Deviation of real gas from ideal gas - Revision of a model : More refined model for a real gas
17 Description of a system composed of a pure gas Properties (variables or descriptors) of a pure gas system : - physical description: macroscopic properties of a gas system pressure P, volume V, and temperature T, chemical composition C, number of atoms or molecules, n - chemical description: µ (chemical potential) Intensive variables : T, P, µ(chemical potential) Extensive variables : V, n (# of moles of a gas) What about a molar volume (V/n)? If numerical values given to those descriptors, we know everything we need to know about the properties of the system. - the state of the system specified
18 Correlation between behavior and variables of a system Cause and Effect y = F(x) ; y is a function of x, x : controlled variable, y : observed variable
19 Properties of a gas : amount of gas n, temperature T, volume, V and pressure P Description of a gas at equilibrium Equilibrium of a system : - Thermal equilibrium : uniform T at each part of the system - Mechanical equilibrium : uniform P at each part of the system - Chemical equilibrium : uniform µ at each part of the system State of a gas: defined with numerical values given to amount of gas n, temperature T, volume V, and pressure P Equation of state of a gas : p = f(t, V, n), Equation of state of an ideal gas : pv = nrt
20 Equilibrium of a system : The word equilibrium means a state of balance. In an equilibrium state, there are no unbalanced potentials (or driving forces) within the system. Thermal equilibrium : T (thermal potential) is the same in every part of a system Mechanical equilibrium : P (mechanical potential) is the same in every part of a system Chemical equilibrium : µ (chemical potential) is the same in every part of a system P = f(t, V, n) pv = nrt for an ideal gas Gas A in a container P. V
21 Boyle s law pv = nrt
22 Equilibrium of a system : The word equilibrium means a state of balance. In an equilibrium state, there are no unbalanced potentials (or driving forces) within the system. Thermal equilibrium : T (thermal potential) is the same in every part of a system Mechanical equilibrium : P (mechanical potential) is the same in every part of a system Chemical equilibrium : µ (chemical potential) is the same in every part of a system P = f(t, V, n) pv = nrt for an ideal gas Gas A in a container P. V
23 The Zeroth Law of Thermodynamics Consider two systems, A and B, in which the temperature of A is greater than the temperature of B. T A > T B - Each is a closed system. - No material transfer, but heat & work transfer across the boundary What happens to the temperature when A and B are brought together? - Heat flux from A to B due to temperature difference. Why? - Thermal energy transfer, or heat transfer from A to B till T A = T B - Two systems at thermal equilibrium
24 The Zeroth Law of Thermodynamics If two systems of any size are in thermal equilibrium with each other and a third system is in thermal equilibrium with one of them, then it is in thermal equilibrium with the other, too. If T A = T B and T B = T C, then T A = T C
25 State of a system The state of a system is dictated by what the state variables are, not by what they were, or how they got there. 1. Process 1 Process 2 Initial State Intermediate State Final State 2. Process 3 Initial State Final State
26 State of a system State Variable (Variable necessary to describe a state of system) : State function - precisely measurable physical property that characterizes the state of a system, independently of how the system was brought to that state. (path-independent) - must be inherently single-valued to characterize a state. State variables : pressure P, volume V, and temperature T, internal energy U, enthalpy H, Helmholtz free energy F and Gibbs free energy G and entropy S In the ideal gas law, the state of n moles of gas is precisely determined by these three state variables of P, V and T. PV = nrt
27 Equation of State of a gas PV = nrt = PV State Variables : P, T, V, n For any fixed amount of a pure gas, consider two state variables P and V. - For a given T, P and V can not be controlled independently from each other. - For any fixed amount of a pure gas, only two of the three state variables P, V, and T are truly independent. - Mathematical equation with which we can calculate the third state variable from the two known state variables : equation of state
28 Equation of State of a gas PV = nrt = PV The physical properties of a perfect gas are completely described by the amount of substance of which it is comprised, its temperature, its pressure and the volume which it occupies. These four parameters are not independent, and the relations between them are expressed in the ideal gas laws. The three historical gas laws Boyle s law, Charles law and Avogadro s principle are specific cases of the perfect gas equation of state, which is usually quoted in the form pv=nrt, where R is the gas constant.
29 Equation of State of a gas PV = nrt = PV The kinetic theory of gases is an attempt to describe the macroscopic properties of a gas in terms of molecular behavior (microscopic properties). Pressure is regarded as the result of molecular impacts with the walls of the container, and temperature is related to the average translational energy of the molecules. The molecules are considered to be of negligible size, with no attractive forces between them, travelling in straight lines. Molecules undergo perfectly elastic collisions, with the kinetic energy of the molecules being conserved in all collisions, but being transferred between molecules
30 Ideal Gas Law An ideal gas : - all collisions between gas molecules are perfectly elastic - there are no intermolecular attractive forces - no potential energy (no force field) - a collection of perfectly hard spheres which collide but which otherwise do not interact with each other - all the internal energy is in the form of kinetic energy and any change in internal energy is accompanied by a change in temperature. An ideal gas : characterized by three state variables: absolute pressure (P), volume (V), and absolute temperature (T).
31 Ideal Gas Law with Constraints : PV = nrt All the possible states of an ideal gas can be represented by a PVT surface as illustrated in the left. The behavior when any one of the three state variables is held constant is also shown.
32 Equation of State pv = nrt pv = nrt V/T = nr/p V = nrt/p pv = nrt Boyle s law Charles s law Avogadro s law at fixed n, T V/T = nr/p V/n = RT/p at fixed n, p at fixed p, T V = nrt/p R : Proportionality constant
33 Boyle s law pv = nrt
34 Charles s law V/T = nr/p
35 Avogadro s law V = nrt/p
36 Ideal Gas Law The relationship between T, P and V : deduced from kinetic theory of gases and is called the n = number of moles R = universal gas constant = J/mol K N = number of molecules k = Boltzmann constant = x J/K = x 10-5 ev/k k = R/N A N A = Avogadro's number = x /mol one mole of an ideal gas at STP occupies 22.4 liters. STP is used widely as a standard reference point for expression of the properties and processes of ideal gases. - standard temperature : freezing point of water, 0 C = K - standard pressure : 1 atmosphere = 760 mmhg = kpa - standard volume of 1 mole of an ideal gas at STP : 22.4 liters
37 SI base units Time is one of the so-called base units within the SI system, and so is length. Whereas volume can be expressed in terms of a length (for example, a cube has a volume l 3 and side of area l 2 ), we cannot define length in terms of something simpler. Similarly, whereas a velocity is a length per unit time, we cannot express time in terms of something simpler. In fact, just as compounds are made up of elements, so all scientific units are made up from seven base units: length, time, mass, temperature, current, amount of material and luminous intensity.
38 SI base units
39 SI base units
40 Ideal Gas Law pv = nrt SI units: V (m 3 ), P (Pa), T (K) R = J K -1 mol -1 1 J = 1 Nm, 1 N = 1 kg m s -2 1 Pa = 1 N/m 2 = 1 kg m s -2 /m 2 = 1 kg m -1 s -2 alternative units: V (L), (1 L = 1 dm 3 = 10-3 m 3 ), P (atm) R = x 10-2 L atm K -1 mol -1 1 Pa = 1 N/m 2 = 10 5 bar = atm = torr = psi
41 Ideal Gas Law with Constraints : PV = nrt All the possible states of an ideal gas can be represented by a PVT surface as illustrated in the left. The behavior when any one of the three state variables is held constant is also shown.
42 Partial Derivatives : How is one state variable affected when another state variable changes?
43 Derivatives : smoothly varying function y = f (x) We can draw a unique tangent line (a straight line whose slope matches the curve s slope) at each point on the curve. Recall that the slope of a line is defined as the amount y changes if x is changed by one; for example, the line y = 3x +6 has a slope of three. The mathematical definition of the derivative is
44 Partial Derivatives : F = function (x, y, z,..)? Change in F is expressed by df caused by a change in x by dx, a change in y by dy, a change in z by dz and so on. Total derivatives of a function of multiple variables F = function (x, y, z,..)? the derivative of the function F taken w.r.t. one variable at a time with the other variables held constant the derivative of the function F taken w.r.t. x only with y, z and so on treated as constants : partial derivatives
45 Partial Derivative When there is more than one variable in a function, it is often useful to examine the variation of the function with respect to one of the variables with all the other variables constrained to stay constant. This is the purpose of a partial derivative. the partial derivative with respect to x, holding y as a constant : the partial derivative with respect to y holding x as a constant : :
46 Ideal Gas Law with Constraints : PV = nrt All the possible states of an ideal gas can be represented by a PVT surface as illustrated in the left. The behavior when any one of the three state variables is held constant is also shown.
47 Partial Derivatives and Ideal Gas Law How is one state variable affected when another state variable changes? V = f(t,p) V T P
48 Partial Derivatives and Ideal Gas Law How does the P varies w.r.t. T, assuming constant n and V? PV = nrt, P = nrt/v
49 Non-ideal Gas - Ideal gas : PV= nrt - Real gas : molecular interaction, molecular size Non-ideality of real gas Deviation of real gas from ideal gas Quantifying non-ideality
50 Ideal Gas Law An ideal gas : - all collisions between gasmolecules are perfectly elastic - there are no intermolecular attractive forces - no potential energy (no force field) - a collection of perfectly hard spheres which collide but which otherwise do not interact with each other - all the internal energy is in the form of kinetic energy and any change in internal energy is accompanied by a change in temperature. An ideal gas : characterized by three state variables: absolute pressure (P), volume (V), and absolute temperature (T).
51 Ideal Gas Law Gas Kinetic Theory
52 Non-ideal Gas - Ideal gas : PV= nrt - Real gas : molecular interaction, molecular size Why Non-ideality for real gas? Deviation of real gas from ideal gas Quantifying non-ideality
53 Scientific Thinking - System under investigation : gas in a balloon - Description or Behavior of a system : Energy, # of moles of gas, pressure, volume, temperature - Variables of a system : pressure, volume, temperature - Correlation between behavior and variables of a system : T vs P, T vs. V, V vs. P - Modeling of a system : Mathematical expression for an ideal gas, Mathematical expression for a real gas - Comparison of a model with a system : Deviation of real gas from ideal gas - Revision of a model : More refined model for a real gas
54 Description of Non- ideal Gas - Start with the equation of state of an ideal gas : PV= nrt - Different behavior of a non-ideal gas from an ideal gas - To develop the equation of state of a non-ideal gas, modify the equation of state of an Ideal gas, considering molecular interaction, molecular size effect of a non-ideal gas van der Waals gas equation - Deviation of real gas from ideal gas - Analysis of non-ideality using van der Waals gas equation
55 Non- ideal Gas - Intermolecular interaction Coulomb's Law Like charges repel, unlike charges attract. The electric force acting on a point charge q 1 as a result of the presence of a second point charge q 2 is given by Coulomb's Law: where ε 0 = permittivity of space - Finite particle size
56 Non- ideal Gas Compressibility Factor
57 Non- ideal Gas Modification of the ideal gas equation : the van der Waals equation How can the ideal gas law be modified to yield an equation that will represent the experimental data more accurately? In the ideal gas law, namely the prediction that under any finite pressure the volume of the gas is zero at the absolute zero of temperature : On cooling, real gases liquefy and ultimately solidify ; after liquefaction the volume does not change very much. We can arrange the new equation so that it predicts a finite, positive volume for the gas at 0 K by adding a positive constant b to the ideal volume
58 Since Eq. (3.3) requires Z to be a linear function of pressure with a positive slope b/rt, it cannot possibly fit the curve for nitrogen in Fig. 3. 1, which starts from the origin with a negative slope. However, Eq. (3.3) can represent the behavior of hydrogen. In Fig the dashed line is a plot of Eq. (3.3) fitted at the origin to the curve for hydrogen. In the low-pressure region the dashed line represents the data very well.
59 We have already noted that the worst offenders in the matter of having values of Z less than unity are methane and carbon dioxide, which are easily liquefied. Thus we begin to suspect a connection between ease of liquefaction and the compressibility factor, and to ask why a gas liquefies.
60 Consider two small volume elements V 1 and V 2 in a container of gas (Fig. 3.3). Suppose that each volume element contains one molecule and that the attractive force between the two volume elements is some small value f. If another molecule is added to V 2, keeping one molecule in V 1, the force acting between the two elements should be 2f ; addition of a third molecule to V 2 should increase the force to 3f, and so on. The force of attraction between the two volume elements is therefore proportional to C 2, the concentration of molecules in V 2. If at any point in the argument, the number of molecules in V 2 is kept constant and molecules are added to V 1, then the force should double and triple, etc. The force is therefore proportional to C 1, the concentration of molecules in V 1. Thus, the force acting between the two elements can be written as follows. Force is proportional to the product of [C 1 x C 2 ]. Since the concentration in a gas is everywhere the same, C 1 = C 2 = C, and so, force is proportional to C 2. But C = n/v = 1/V m ; consequently, force is proportional to 1/V m2.
61 Because of the attractive forces between the molecules, the pressure is less than that given by Eq. (3.4) by an amount proportional to 1/V m2, so a term is subtracted from the right-hand side to yield where a is a positive constant roughly proportional to the energy of vaporization of the liquid.
62 Ideal gas law : - molecules of a gas as point particles with perfectly elastic collision - valid for dilute gases, but gas molecules are not point masses van der Waals equation of state ; - A modification of the ideal gas law proposed by Johannes D. van der Waals in 1873 to take into account molecular size and molecular interaction forces. Constants a and b : - positive values and characteristic of the individual gas - gas-specific properties, different values for different gases - The van der Waals equation of state approaches the ideal gas law PV=nRT as the values of these constants approach zero.
63 van der Waals Equation of State Constant a : correction for the intermolecular forces Constant b : correction for finite molecular size - its value is the volume of one mole of the atoms or molecules - could be used to estimate the radius of an atom or molecule, modeled as a sphere.
64 Ideal Gas Law An ideal gas : - all collisions between atoms or molecules are perfectly elastic - there are no intermolecular attractive forces - a collection of perfectly hard spheres which collide but which otherwise do not interact with each other - no potential energy (no force field) - all the internal energy is in the form of kinetic energy and any change in internal energy is accompanied by a change in temperature. An ideal gas : characterized by three state variables: absolute pressure (P), volume (V), and absolute temperature (T).
65 Ionic Bonding Regular stacking of Na + and Cl ions in solid NaCl, which is indicative of the nondirectional nature of ionic bonding. 6 Na + surround each Cl -, and 6 Cl - surround each Na +. The ionic bond is the result of the coulombic attraction.
66 Ionic Bonding Net bonding force curve for a Na + Cl pair showing an equilibrium bond length of a 0 = 0.28 nm. - - F = E/ r Z 1, Z 2 = Number of electrons removed or added during ion formation e = Electron Charge, a = Interionic seperation distance ε = Permeability of free space (8.85 x C 2 /Nm 2 ) -
67 Ionic Bonding Intermolecular interaction Energy minimum energy most stable Energy balance of attractive and repulsive terms A E N = E A + E R = + r B r n Repulsive energy E R Interatomic separation r Net energy E N Attractive energy E A
68 Intermolecular Forces and Potentials Intermolecular interaction F = E/ r
69 Non- ideal Gas
70 Non- ideal Gas Intermolecular force? : condensation, liquefaction at high P Ideal Gas Liquefaction of a real gas No liquefaction of an ideal gas Requirements for liquefaction of a real gas?
71 Non- ideal Gas D D isotherm D D D E D Phase : a physically distinctive form of matter, such as a solid, liquid, gas or plasma. At point C A phase of matter is characterized by having relatively uniform chemical and physical properties. Phases are different from states of matter. The states of matter (e.g., liquid, solid, gas) are phases, but matter can exist in different phases yet the same state of matter. For example, mixtures can exist in multiple phases, such as an oil phase and an aqueous phase.
72 Phase Equilibria in water
73 Phase Equilibria in water
74 Phase Equilibria in water
75 Pc At Critical Point, Molar volume of liquid = Molar volume of gas Critical Point Critical Temperature Tc Critical Pressure Pc Critical Volume Vc Molar volume of liquid Molar volume of gas Vc
76 Critical point The liquid-vapour equilibrium curve has a top limit labelled as C in the phase diagram. This is known as the critical point. The temperature and pressure corresponding to this are known as the critical temperature and critical pressure. If you increase the pressure on a gas (vapor) at a temperature lower than the critical temperature, you will eventually cross the liquid-vapour equilibrium line and the vapor will condense to give a liquid.
77 Critical point What if your temperature was above the critical temperature? There wouldn't be any line to cross! Above the critical temperature, it is impossible to condense a gas into a liquid just by increasing P. Instead of existing as separate liquid and vapor phases, the system exists as a single supercritical fluid phase. The transition to this supercritical fluid phase is continuous and is therefore not a true phase change. All you get is a highly compressed gas. At the critical state, the particles have too much energy for the intermolecular attractions to hold them together as a liquid. The critical temperature obviously varies from substance to substance and depends on the strength of the attractions between the particles. The stronger the intermolecular attractions, the higher the critical temperature.
78 Cryophorus : an instrument that illustrates the freezing of water by its own evaporation A cryophorus is a glass container containing liquid water and water vapor. It is used to demonstrate rapid freezing by evaporation. A typical cryophorus has a bulb at one end connected to a tube of the same material. When the liquid water is manipulated into the bulbed end and the other end is connected to a vacuum pump, the gas pressure drops as it is cooled. The liquid water begins to evaporate, producing more water vapor. Evaporation causes the water to cool rapidly to its freezing point and it solidifies suddenly. Finally, a piece of ice disappears as a result of ice sublimation to water vapor. Vacuum pump Water droplet in a bottle under vacuum
79 Cryophorus : A cryophorus is a glass container containing liquid water and water vapor. It is used to demonstrate rapid freezing by evaporation. When the liquid water is manipulated into the bulbed end and the other end is connected to a vacuum pump, the gas pressure drops as it is cooled. The liquid water begins to evaporate, producing more water vapor. Evaporation causes the water to cool rapidly to its freezing point and it solidifies suddenly. Finally, a piece of ice disappears as a result of ice sublimation to water vapor. Vacuum pump Water droplet in a bottle under vacuum
80 Non- ideal Gas Intermolecular force vs. critical temperature
81 Intermolecular Forces and Potentials
82 Intermolecular Forces and Potentials Force Potential Energy V(z)
83 van der Waals Equation of State : particle size b
84 Other Equations of State of Non-Ideal Gas
85 van der Waals Equation of State : particle size b
86 Non- ideal Gas : van der Waals Equation of State
87 van der Waals Equation : intermolecular interaction a
88 van der Waals Equation of State : intermolecular interaction Real P are less than ideal value by the attraction force from interior of the gas (internal pressure). Pressure on wall depends on both collision frequency and collision force, both related to the molar concentration (n/v = 1/V m ), so P reduced by a correction term which is square of molar conc. a/v m2.
89 Non- ideal Gas : van der Waals Equation of State
90 Residual Volume Ideal gas : PV = nrt, PV m, ideal = RT, V m, ideal = RT/P (R T)/(P V m ) = V m, ideal /V m Residual volume = V m V m, ideal
91 Residual Volume
92 Residual Volume = Vm Vm, ideal
93 Residual Volume
94 Residual Volume
95 Non- ideal Gas : van der Waals Equation of State
96 Non-ideal Gas : how to express non-ideality? N moles of Gas in a balloon P, T, V Ideal gas : PV = nrt, PV m = RT Compressibility factor Z (T, P) = PV m /RT = P/(RT/V m ) = P/P ideal
97 Compressibility factor Z (T, P) = PV m /RT = P/(RT/V m ) = P/P ideal Compression Factor = Molar volume of gas/molar volume of perfect gas May it be different from1?
98 Non- ideal Gas : how to express non-ideality? Compressibility factor Z, Ideal gas : PV= nrt
99 Non- ideal Gas : how to express non-ideality? Compressibility factor Z, Ideal gas : PV= nrt Homework : Compressibility factor Z for van der Walls gas? Due 19 March
100 Virial Equation of State
101 Compressibility factor Z = P V m /RT at moderate pressure (low P and large V), b/v m < 1 since for x << 1.
102 This equation expresses Z as a function of temperature and molar volume. It would be preferable to have Z as a function of temperature and pressure ; however, this would entail solving the van der Waals equation for V as a function of T and p, then multiplying the result by p/rt to obtain Z as a function of T and p. At P = 0, all of the higher terms drop out and this derivative reduces simply to
103 Compressibility factor Z, Z as a function of T and V Z as a function of T and P
104 This equation expresses Z as a function of temperature and molar volume. It would be preferable to have Z as a function of temperature and pressure ; however, this would entail solving the van der Waals equation for V as a function of T and p, then multiplying the result by p/rt to obtain Z as a function of T and p. At P = 0, all of the higher terms drop out and this derivative reduces simply to
105 Non- ideal Gas
106 where the derivative is the initial slope of the Z versus p curve. If b > a/rt, the slope is positive ; the size effect dominates the behavior of the gas. On the other hand, if b < a/r T, then the initial slope is negative ; the effect of the attractive forces dominates the behavior of the gas. Thus the van der Waals equation, which includes both the effects of size and of the intermolecular forces, can interpret either positive or negative slopes of the Z versus p curve. In interpreting Fig. 3.2, we can say that at 0 C the effect of the attractive forces dominates the behavior of methane and carbon dioxide, while the molecular size effect dominates the behavior of hydrogen.
107 where the derivative is the initial slope of the Z versus p curve. If b > a/rt, the slope is positive ; the size effect dominates the behavior of the gas. On the other hand, if b < a/r T, then the initial slope is negative ; the effect of the attractive forces dominates the behavior of the gas. Thus the van der Waals equation, which includes both the effects of size and of the intermolecular forces, can interpret either positive or negative slopes of the Z versus p curve. In interpreting Fig. 3.2, we can say that at 0 C the effect of the attractive forces dominates the behavior of methane and carbon dioxide, while the molecular size effect dominates the behavior of hydrogen.
108 Non- ideal Gas Boyle Temperature at which (dz/dp) at P=0 approaches zero. At T Boyle, b=a/rt, then T Boyle =a/rb
109 Non- ideal Gas If the temperature is low enough, the term a/rt will be larger than b and so the initial slope of Z versus p will be negative. As the temperature increases, a/rt becomes smaller and smaller ; if the temperature is high enough, a/rt becomes less than b, and the initial slope of the Z versus p curve becomes positive. Finally, if the temperature is extremely high, Eq. (3.9) shows that the slope of Z versus p must approach zero. At some intermediate temperature T B, the Boyle temperature, the initial slope must be zero. The condition for this is given by Eq. (3.9) as b a/rt B = 0. T B =a/rb
110 Non- ideal Gas At the Boyle temperature the Z versus p curve is tangent to the curve for the ideal gas at p = 0 and rises above the ideal gas curve only very slowly. In Eq. (3.8) the second term drops out at T B, and the remaining terms are small until the pressure becomes very high. Thus at the Boyle temperature the real gas behaves ideally over a wide range of pressures, because the effects of size and of intermolecular forces roughly compensate. Z = 1, (dz/dp) p=0 = 0
111 Non- ideal Gas The data in Table 3.2 make the curves in Fig. 3.2 comprehensible. All of them are drawn at 0 o C. Thus hydrogen is above its Boyle temperature and so always has Z-values greater than unity. The other gases are below their Boyle temperatures and so have Z-values less than unity in the low-pressure range.
112
113
114 van der Waals Equation of State intermolecular interaction vs. melting point
115 Virial Equation of State
116 Other Equations of State
117 Non- ideal Gas The decrease in volume over a wide range in which the pressure remains at the constant value P e. At a somewhat higher temperature the behavior is qualitatively the same, but the range of volume over which condensation occurs is smaller and the vapor pressure is larger.
118 Non- ideal Gas highly compressed gaseous state of the substance Liquid Liquid & Vapor in equilibrium Gas Two - phase region and continuity of states A phase is a region of uniformity in a system. This means a region of uniform chemical composition and uniform physical properties. Thus a system containing liquid and vapor has two regions of uniformity. In the vapor phase, the density is uniform throughout. In the liquid phase, the density is uniform throughout but has a value different from that in the vapor phase.
119 Non- ideal Gas When V is very large this equation approximates the ideal gas law, since V is very large compared with b and a/v 2 is very small compared with the first term. This is true at all temperatures. At high temperatures, the term a/v 2 can be ignored, since it is small compared with RT/(V-b). Isotherms of the van der Waals gas At lower temperatures and smaller volumes, none of the terms in the equation may be neglected. The result is rather curious. At the temperature T c the isotherm develops a point of inflection, point E. At still lower temperatures, the isotherms exhibit a maximum and a minimum.
120 Non- ideal Gas Cubic equation, it may have three real roots for certain values of pressure and temperature. There is a certain maximum pressure P c and a certain maximum temperature T c, at which liquid and vapor can coexist. Isotherms of the van der Waals gas This condition of temperature and pressure is the critical point and the corresponding volume is the critical volume V c. At the critical point the three- roots are all equal to V c ;. The cubic equation can be written in terms of its roots V, V, V. At the critical point V' = V" = V'" = V c, so that the equation becomes (V - V c ) 3 = O.
121 Non- ideal Gas At the critical point Isotherms of the van der Waals gas
122 van der Waals Equation of State P V Below critical temperature
123 Law of Corresponding States Reduced variables P r T r V r
124 Law of Corresponding States
125 Law of Corresponding States P P V P P vs V plot at critical temperature
126 Law of Corresponding States
127 Law of Corresponding States
128 Law of Corresponding States
129 Law of Corresponding States
130 Law of Corresponding States Reduced variables P r T r V r The properties of all gases are the same if we compare them under the same conditions relative to their critical point.
131 Law of Corresponding States PV = nrt No gas-specific properties, a, b : gas-specific properties, different values for different gases
132 Law of Corresponding States a, b : gas-specific properties, different values for different gases
133 Law of Corresponding States
134 Law of Corresponding States
135 Law of Corresponding States Gases in states with the same values of T r and P r deviate from the ideality to the same extent; i.e. the values of Z = PV/(RT) are approximately same for different gases at the same value of T r and P r. In other words, the reduced volume of all gases are the same when the gases are at the same reduced pressures and temperatures.
136 Law of Corresponding States Two gases at the same reduced temperature and under the same reduced pressure are in corresponding states. By the law of corresponding states, they should both occupy the same reduced volume. For example, argon at 302 K and under 16 atm pressure, and ethane at 381 K and under 18 atm are in corresponding states, since each has T r = 2 and P r = 1/3.
137 Law of Corresponding States At very low pressures (P r <<1), the gases behave as an ideal gas regardless of temperature. At high temperature (T r > 2), ideal gas behaviour can be assumed with good accuracy regardless of pressure except when (P r >> 1). The deviation of a gas from ideal gas behaviour is greatest in the vicinity of the critical point.
138 Law of Corresponding States It may be seen from the chart that the value of the compressibility factor at the critical state is about Note that the value of Z obtained from Van der waals equation of state at the critical point, which is higher than the actual value.
139 Law of Corresponding States R = L atm mol -1 K -1
140 Law of Corresponding States
Fig Note the three different types of systems based on the type of boundary between system and surroundings.
CHAPTER 1 LECTURE NOTES System, Surroundings, and States Fig. 1.4 Note the three different types of systems based on the type of boundary between system and surroundings. Intensive and Extensive Properties
More informationChapter 1. The Properties of Gases Fall Semester Physical Chemistry 1 (CHM2201)
Chapter 1. The Properties of Gases 2011 Fall Semester Physical Chemistry 1 (CHM2201) Contents The Perfect Gas 1.1 The states of gases 1.2 The gas laws Real Gases 1.3 Molecular interactions 1.4 The van
More information(b) The measurement of pressure
(b) The measurement of pressure The pressure of the atmosphere is measured with a barometer. The original version of a barometer was invented by Torricelli, a student of Galileo. The barometer was an inverted
More informationCh 6 Gases 6 GASES. Property of gases. pressure = force/area
6 GASES Gases are one of the three states of matter, and while this state is indispensable for chemistry's study of matter, this chapter mainly considers the relationships between volume, temperature and
More informationUnit 08 Review: The KMT and Gas Laws
Unit 08 Review: The KMT and Gas Laws It may be helpful to view the animation showing heating curve and changes of state: http://cwx.prenhall.com/petrucci/medialib/media_portfolio/text_images/031_changesstate.mov
More informationSatish Chandra. Unit I, REAL GASES. Lecture Notes Dated: Dec 08-14, Vander-Waals Gas
Vander-Waals Gas Lecture Notes Dated: Dec 08-14, 01 Many equations have been proposed which describe the pvt relations of real gases more accurately than does the equation of state of an ideal gas. Some
More informationChapter Elements That Exist as Gases at 25 C, 1 atm. 5.2 Pressure basic physics. Gas Properties
5.1 Elements That Exist as Gases at 25 C, 1 atm Chapter 5 The Gaseous State YOU READ AND BE RESPONSIBLE FOR THIS SECTION! Gaseous compounds include CH 4, NO, NO 2, H 2 S, NH 3, HCl, etc. Gas Properties
More informationGases, Liquids and Solids
Chapter 5 Gases, Liquids and Solids The States of Matter Gases Pressure Forces between one molecule and another are called intermolecular forces. Intermolecular forces hold molecules together and kinetic
More informationGaseous States of Matter
Gaseous States of Matter Semester-1 : ICY-101: CHEMISTRY-I, Unit III Dr. Tapta Kanchan Roy Assistant Professor Department of Chemistry & Chemical Sciences Central University of Jammu 1 The simplest state
More informationGases and Kinetic Molecular Theory
1 Gases and Kinetic Molecular Theory 1 CHAPTER GOALS 1. Comparison of Solids, Liquids, and Gases. Composition of the Atmosphere and Some Common Properties of Gases 3. Pressure 4. Boyle s Law: The Volume-Pressure
More informationGases, Liquids, Solids, and Intermolecular Forces
Chapter 6 Gases, Liquids, Solids, and Intermolecular Forces Solids: The particles of a solid have fixed positions and exhibit motions of vibration. Liquids: The particles of a liquid are free to move within
More informationSummary of Gas Laws V T. Boyle s Law (T and n constant) Charles Law (p and n constant) Combined Gas Law (n constant) 1 =
Summary of Gas Laws Boyle s Law (T and n constant) p 1 V 1 = p 2 V 2 Charles Law (p and n constant) V 1 = T 1 V T 2 2 Combined Gas Law (n constant) pv 1 T 1 1 = pv 2 T 2 2 1 Ideal Gas Equation pv = nrt
More informationA Gas Uniformly fills any container. Easily compressed. Mixes completely with any other gas. Exerts pressure on its surroundings.
Chapter 5 Gases Chapter 5 A Gas Uniformly fills any container. Easily compressed. Mixes completely with any other gas. Exerts pressure on its surroundings. Copyright Cengage Learning. All rights reserved
More informationLecture Presentation. Chapter 10. Gases. John D. Bookstaver St. Charles Community College Cottleville, MO Pearson Education, Inc.
Lecture Presentation Chapter 10 John D. Bookstaver St. Charles Community College Cottleville, MO Characteristics of Unlike liquids and solids, gases Expand to fill their containers. Are highly compressible.
More informationLecture Presentation. Chapter 10. Gases. James F. Kirby Quinnipiac University Hamden, CT Pearson Education
Lecture Presentation Chapter 10 2015 Pearson Education James F. Kirby Quinnipiac University Hamden, CT Characteristics of Physical properties of gases are all similar. Composed mainly of nonmetallic elements
More informationB 2, C 2, N 2. O 2, F 2, Ne 2. Energy order of the p 2p and s 2p orbitals changes across the period.
Chapter 11 Gases Energy order of the p p and s p orbitals changes across the period. Due to lower nuclear charge of B, C & N there is no s-p orbitals interaction Due to high nuclear charge of O, F& Ne
More informationChapter 10. Gases. The Gas Laws
Page 1 of 12 10.1 Characteristics of Gases. Chapter 10. Gases. All substances have three phases; solid, liquid and gas. Substances that are liquids or solids under ordinary conditions may also exist as
More informationGases. Characteristics of Gases. Unlike liquids and solids, gases
Gases Characteristics of Gases Unlike liquids and solids, gases expand to fill their containers; are highly compressible; have extremely low densities. 1 Pressure Pressure is the amount of force applied
More informationChapter 11 Gases 1 Copyright McGraw-Hill 2009
Chapter 11 Gases Copyright McGraw-Hill 2009 1 11.1 Properties of Gases The properties of a gas are almost independent of its identity. (Gas molecules behave as if no other molecules are present.) Compressible
More informationReal Gases. Sections (Atkins 6th Ed.), (Atkins 7-9th Eds.)
Real Gases Sections 1.4-1.6 (Atkins 6th Ed.), 1.3-1.5 (Atkins 7-9th Eds.) Molecular Interactions Compression factor Virial coefficients Condensation Critical Constants Van der Waals Equation Corresponding
More informationGases. Measuring Temperature Fahrenheit ( o F): Exceptions to the Ideal Gas Law. Kinetic Molecular Theory
Ideal gas: a gas in which all collisions between atoms or molecules are perfectly elastic (no energy lost) there are no intermolecular attractive forces Think of an ideal gas as a collection of perfectly
More informationImperfect Gases. NC State University
Chemistry 431 Lecture 3 Imperfect Gases NC State University The Compression Factor One way to represent the relationship between ideal and real gases is to plot the deviation from ideality as the gas is
More informationProperties of Gases. 5 important gas properties:
Gases Chapter 12 Properties of Gases 5 important gas properties: 1) Gases have an indefinite shape 2) Gases have low densities 3) Gases can compress 4) Gases can expand 5) Gases mix completely with other
More informationLecture 2 PROPERTIES OF GASES
Lecture 2 PROPERTIES OF GASES Reference: Principles of General Chemistry, Silberberg Chapter 6 SOME FUNDAMENTAL DEFINITIONS: SYSTEM: the part of the universe being the subject of study 1 SOME FUNDAMENTAL
More informationWhy study gases? A Gas 10/17/2017. An understanding of real world phenomena. An understanding of how science works.
Kinetic Theory and the Behavior of Ideal & Real Gases Why study gases? n understanding of real world phenomena. n understanding of how science works. Gas Uniformly fills any container. Mixes completely
More informationChapter 5 The Gaseous State
Chapter 5 The Gaseous State Contents and Concepts Gas Laws We will investigate the quantitative relationships that describe the behavior of gases. 1. Gas Pressure and Its Measurement 2. Empirical Gas Laws
More informationSome Fundamental Definitions:
Lecture 2. The GAS LAWS Some Fundamental Definitions: SYSTEM: the part of the universe being the subject of study 1 Some Fundamental Definitions: State of the System: condition of a system at any given
More informationPhysics 5D PRACTICE FINAL EXAM Fall 2013
Print your name: Physics 5D PRACTICE FINAL EXAM Fall 2013 Real Exam is Wednesday December 11 Thimann Lecture 3 4:00-7:00 pm Closed book exam two 8.5x11 sheets of notes ok Note: Avogadro s number N A =
More informationModule 5: Rise and Fall of the Clockwork Universe. You should be able to demonstrate and show your understanding of:
OCR B Physics H557 Module 5: Rise and Fall of the Clockwork Universe You should be able to demonstrate and show your understanding of: 5.2: Matter Particle model: A gas consists of many very small, rapidly
More informationUNIT 10.
UNIT 10 Pressure: F/A http://chemlab.truman.edu/chem130labs/calorimetryfiles/thermobackground.asp There are four variable needed to define the physical state of a gas. They are: o Temperature o Pressure
More informationGases and Kinetic Theory
Gases and Kinetic Theory Chemistry 35 Fall 2000 Gases One of the four states of matter Simplest to understand both physically and chemically Gas Properties Low density Fluid Can be defined by their: 1.
More informationReal Gases 1. The value of compressibility factor for one mole of a gas under critical states is 1) 3/8 2) 2/3 3) 8/27 4) 27/8 2. an der Waal s equation for one mole of CO2 gas at low pressure will be
More informationStates of matter Part 1
Physical pharmacy I 1. States of matter (2 Lectures) 2. Thermodynamics (2 Lectures) 3. Solution of non-electrolyte 4. Solution of electrolyte 5. Ionic equilibria 6. Buffered and isotonic solution Physical
More informationLecture Presentation. Chapter 10. Gases. James F. Kirby Quinnipiac University Hamden, CT Pearson Education, Inc.
Lecture Presentation Chapter 10 James F. Kirby Quinnipiac University Hamden, CT Characteristics of Physical properties of gases are all similar. Composed mainly of nonmetallic elements with simple formulas
More informationS OF MATTER TER. Unit. I. Multiple Choice Questions (Type-I)
Unit 5 STATE TES TE S OF MATTER MA TER I. Multiple Choice Questions (Type-I) 1. A person living in Shimla observed that cooking food without using pressure cooker takes more time. The reason for this observation
More informationChapter 6 The States of Matter. Examples of Physical Properties of Three States of Matter
Chapter 6 The States of Matter Examples of Physical Properties of Three States of Matter 1 Three States of Matter Solids: Fixed shape, fixed volume, particles are held rigidly in place. Liquids: Variable
More information1 Points to Remember Subject: Chemistry Class: XI Chapter: States of matter Top concepts 1. Intermolecular forces are the forces of attraction and repulsion between interacting particles (atoms and molecules).
More informationUNIT 5 States of matter I. Questions carrying one mark
UNIT 5 States of matter I. Questions carrying one mark 5. What are van der Waals forces? 5.2 What type of van der Waals force exists between HCl molecules? 5.3 Between which type of molecules does dipole
More informationStates of matter Part 1. Lecture 1. University of Kerbala. Hamid Alghurabi Assistant Lecturer in Pharmaceutics. Physical Pharmacy
Physical pharmacy I 1. States of matter (2 Lectures) 2. Thermodynamics (2 Lectures) 3. Solution of non-electrolyte 4. Solution of electrolyte 5. Ionic equilibria 6. Buffered and isotonic solution Physical
More informationAlthough different gasses may differ widely in their chemical properties, they share many physical properties
IV. Gases (text Chapter 9) A. Overview of Chapter 9 B. Properties of gases 1. Ideal gas law 2. Dalton s law of partial pressures, etc. C. Kinetic Theory 1. Particulate model of gases. 2. Temperature and
More informationGases. Chapter 5. Copyright The McGraw-Hill Companies, Inc. Permission required for reproduction or display.
Gases Chapter 5 Copyright The McGraw-Hill Companies, Inc. Permission required for reproduction or display. 1 Elements that exist as gases at 25 0 C and 1 atmosphere 2 3 Physical Characteristics of Gases
More informationCHAPTER III: Kinetic Theory of Gases [5%]
CHAPTER III: Kinetic Theory of Gases [5%] Introduction The kinetic theory of gases (also known as kinetic-molecular theory) is a law that explains the behavior of a hypothetical ideal gas. According to
More informationCHAPTER 12 GASES AND KINETIC-MOLECULAR THEORY
. Pressure CHAPER GASES AND KINEIC-MOLECULAR HEORY. Boyle s Law: he -P Relationship 3. Charles Law: he - Relationship 4. Standard &P 5. he Combined Gas Law Equation 6. Avogadro s Law and the Standard Molar
More informationCentimeters of mercury
CHAPTER 11 PROPERTIES OF GASES Gases have an indefinite shape: a gas takes the shape of its container and fills it uniformly. If the shape of the container changes, so does the shape of the gas. Gases
More informationThis should serve a s a study guide as you go on to do the problems in Sapling and take the quizzes and exams.
CHM 111 Chapter 9 Worksheet and Study Guide Purpose: This is a guide for your as you work through the chapter. The major topics are provided so that you can write notes on each topic and work the corresponding
More informationPart One: The Gas Laws. gases (low density, easy to compress)
CHAPTER FIVE: THE GASEOUS STATE Part One: The Gas Laws A. Introduction. 1. Comparison of three states of matter: fluids (flow freely) solids condensed states liquids (high density, hard to compress) gases
More informationChemistry, The Central Science, 10th edition Theodore L. Brown; H. Eugene LeMay, Jr.; and Bruce E. Bursten. Chapter 10. Gases.
Chemistry, The Central Science, 10th edition Theodore L. Brown; H. Eugene LeMay, Jr.; and Bruce E. Bursten Chapter 10 Characteristics of Unlike liquids and solids, they Expand to fill their containers.
More informationChapter 3 PROPERTIES OF PURE SUBSTANCES
Thermodynamics: An Engineering Approach Seventh Edition in SI Units Yunus A. Cengel, Michael A. Boles McGraw-Hill, 2011 Chapter 3 PROPERTIES OF PURE SUBSTANCES Copyright The McGraw-Hill Companies, Inc.
More informationAtomic Mass and Atomic Mass Number. Moles and Molar Mass. Moles and Molar Mass
Atomic Mass and Atomic Mass Number The mass of an atom is determined primarily by its most massive constituents: protons and neutrons in its nucleus. The sum of the number of protons and neutrons is called
More informationChapter 10. Gases THREE STATES OF MATTER. Chapter 10 Problems 6/29/2012. Problems 16, 19, 26, 33, 39,49, 57, 61
Chemistry, The Central Science, 11th edition Theodore L. Brown; H. Eugene LeMay, Jr.; and Bruce E. Bursten Chapter 10 John Bookstaver St. Charles Community College Cottleville, MO Chapter 10 Problems Problems
More informationPhysics 231 Topic 12: Temperature, Thermal Expansion, and Ideal Gases Alex Brown Nov
Physics 231 Topic 12: Temperature, Thermal Expansion, and Ideal Gases Alex Brown Nov 18-23 2015 MSU Physics 231 Fall 2015 1 homework 3 rd midterm final Thursday 8-10 pm makeup Friday final 9-11 am MSU
More informationGases. A gas. Difference between gas and vapor: Why Study Gases?
Gases Chapter 5 Gases A gas Uniformly fills any container. Is easily compressed. Mixes completely with any other gas. Exerts pressure on its surroundings. Difference between gas and vapor: A gas is a substance
More information10/16/2018. Why study gases? An understanding of real world phenomena. An understanding of how science works.
10/16/018 Kinetic Theory and the Behavior of Ideal & Real Gases Why study gases? An understanding of real world phenomena. An understanding of how science works. 1 10/16/018 A Gas Uniformly fills any container.
More informationChemistry B11 Chapter 6 Gases, Liquids, and Solids
Chapter 6 Gases, Liquids, and Solids States of matter: the physical state of matter depends on a balance between the kinetic energy of particles, which tends to keep them apart, and the attractive forces
More informationCHEMISTRY Matter and Change. Chapter 13: Gases
CHEMISTRY Matter and Change Chapter 13: Gases CHAPTER 13 Table Of Contents Section 13.1 Section 13.2 Section 13.3 The Gas Laws The Ideal Gas Law Gas Stoichiometry Click a hyperlink to view the corresponding
More informationGASES (Chapter 5) Temperature and Pressure, that is, 273 K and 1.00 atm or 760 Torr ) will occupy
I. Ideal gases. A. Ideal gas law review. GASES (Chapter 5) 1. PV = nrt Ideal gases obey this equation under all conditions. It is a combination ofa. Boyle's Law: P 1/V at constant n and T b. Charles's
More informationPressure. Pressure Units. Molecular Speed and Energy. Molecular Speed and Energy
Pressure is defined as force per unit area. Pressure Pressure is measured with a device called a barometer. A mercury barometer uses the weight of a column of Hg to determine the pressure of gas pushing
More informationis more suitable for a quantitative description of the deviation from ideal gas behaviour.
Real and ideal gases (1) Gases which obey gas laws or ideal gas equation ( PV nrt ) at all temperatures and pressures are called ideal or perfect gases. Almost all gases deviate from the ideal behaviour
More informationPreparation of the standard solution. Exp 5: Copyright Houghton Mifflin Company.All
Preparation of the standard solution Exp 5: Copyright Houghton Mifflin Company.All 1 1 Mass of KHP: 5.2 5.5 g Volume of volumetric flask: 250.0 cm Molarity of standard (KHP) solution: M = n/v Copyright
More information2. If the volume of a container holding a gas is reduced, what will happen to the presure within the container?
1. Which gas law states that the volume of a fixed mass of a gas is directly proportional to its Kelvin temperature if the pressure is kept constant? A. Boyle s law B. Charles law C. Dalton s law D. Gay-Lussac
More informationChapter 10 Notes: Gases
Chapter 10 Notes: Gases Watch Bozeman Videos & other videos on my website for additional help: Big Idea 2: Gases 10.1 Characteristics of Gases Read p. 398-401. Answer the Study Guide questions 1. Earth
More informationThermodynamics I. Properties of Pure Substances
Thermodynamics I Properties of Pure Substances Dr.-Eng. Zayed Al-Hamamre 1 Content Pure substance Phases of a pure substance Phase-change processes of pure substances o Compressed liquid, Saturated liquid,
More informationChapter 3 PROPERTIES OF PURE SUBSTANCES
Thermodynamics: An Engineering Approach Seventh Edition Yunus A. Cengel, Michael A. Boles McGraw-Hill, 2011 Chapter 3 PROPERTIES OF PURE SUBSTANCES Copyright The McGraw-Hill Companies, Inc. Permission
More informationPressure Volume Temperature Relationship of Pure Fluids
Pressure Volume Temperature Relationship of Pure Fluids Volumetric data of substances are needed to calculate the thermodynamic properties such as internal energy and work, from which the heat requirements
More informationLecture PowerPoints. Chapter 13 Physics: Principles with Applications, 7 th edition Giancoli
Lecture PowerPoints Chapter 13 Physics: Principles with Applications, 7 th edition Giancoli This work is protected by United States copyright laws and is provided solely for the use of instructors in teaching
More informationPROPERTIES OF PURE SUBSTANCES. Chapter 3. Mehmet Kanoglu. Thermodynamics: An Engineering Approach, 6 th Edition. Yunus A. Cengel, Michael A.
Thermodynamics: An Engineering Approach, 6 th Edition Yunus A. Cengel, Michael A. Boles McGraw-Hill, 2008 Chapter 3 PROPERTIES OF PURE SUBSTANCES Mehmet Kanoglu Copyright The McGraw-Hill Companies, Inc.
More informationThe Gaseous State. Definition
The Gaseous State Lecture Material Basic Chemistry 1 2013/2014 Inneke Hantoro Definition A gas is a substance that is normally in the gaseous state at ordinary temperatures and pressures. A vapor is the
More informationChapter Ten- Gases. STUDY GUIDE AP Chemistry
STUDY GUIDE AP Chemistry Chapter Ten- Gases Lecture Notes 10.1 Characteristics of Gases All substances have three phases: solid, liquid and gas. Substances that are liquids or solids under ordinary conditions
More informationChapter 5 The Gaseous State
Chapter 5 The Gaseous State Contents and Concepts Gas Laws We will investigate the quantitative relationships that describe the behavior of gases. 1. Gas Pressure and Its Measurement 2. Empirical Gas Laws
More informationComparison of Solids, Liquids, and Gases
CHAPTER 8 GASES Comparison of Solids, Liquids, and Gases The density of gases is much less than that of solids or liquids. Densities (g/ml) Solid Liquid Gas H O 0.97 0.998 0.000588 CCl 4.70.59 0.00503
More informationGases. Which elements exist as gases at ordinary temperature and pressure? Gases: Have simple molecular formulas. Chapter 10 part 1: Ideal Gases
Chapter 10 part 1: Ideal Gases Read: BLB 10.1 5 HW: BLB 10.2,19a,b, 23, 26, 30, 39, 41, 45, 49 Sup 10:1 6 Know: What is pressure? Gases Which elements exist as gases at ordinary temperature and pressure?
More informationCh Kinetic Theory. 1.All matter is made of atoms and molecules that act like tiny particles.
Ch. 15.1 Kinetic Theory 1.All matter is made of atoms and molecules that act like tiny particles. Kinetic Theory 2.These tiny particles are always in motion. The higher the temperature, the faster the
More informationC H E M 1 CHEM 101-GENERAL CHEMISTRY CHAPTER 5 GASES INSTR : FİLİZ ALSHANABLEH
C H E M 1 CHEM 101-GENERAL CHEMISTRY CHAPTER 5 GASES 0 1 INSTR : FİLİZ ALSHANABLEH CHAPTER 5 GASES Properties of Gases Pressure History and Application of the Gas Laws Partial Pressure Stoichiometry of
More informationChapter Practice Test Grosser
Class: Date: Chapter 10-11 Practice Test Grosser Multiple Choice Identify the choice that best completes the statement or answers the question. 1. According to the kinetic-molecular theory, particles of
More informationE6 PROPERTIES OF GASES Flow-times, density, phase changes, solubility
E6 PROPERTIES OF GASES Flow-times, density, phase changes, solubility Introduction Kinetic-Molecular Theory The kinetic energy of an object is dependent on its mass and its speed. The relationship, given
More informationChapter 10. Gases. Chemistry, The Central Science, 10th edition Theodore L. Brown; H. Eugene LeMay, Jr.; and Bruce E. Bursten
Chemistry, The Central Science, 10th edition Theodore L. Brown; H. Eugene LeMay, Jr.; and Bruce E. Bursten Chapter 10 John Bookstaver St. Charles Community College St. Peters, MO 2006, Prentice Hall, Inc.
More informationChapter 10. Gases. Chemistry, The Central Science, 11th edition Theodore L. Brown; H. Eugene LeMay, Jr.; and Bruce E. Bursten
Chemistry, The Central Science, 11th edition Theodore L. Brown; H. Eugene LeMay, Jr.; and Bruce E. Bursten Chapter 10 John Bookstaver St. Charles Community College Cottleville, MO Characteristics of Unlike
More information10/15/2015. Why study gases? An understanding of real world phenomena. An understanding of how science works.
0/5/05 Kinetic Theory and the Behavior of Ideal & Real Gases Why study gases? An understanding of real world phenomena. An understanding of how science works. 0/5/05 A Gas fills any container. completely
More informationCHEM1100 Summary Notes Module 2
CHEM1100 Summary Notes Module 2 Lecture 14 Introduction to Kinetic Theory & Ideal Gases What are Boyle s and Charles Laws? Boyle s Law the pressure of a given mass of an ideal gas is inversely proportional
More informationBasic Thermodynamics Module 1
Basic Thermodynamics Module 1 Lecture 9: Thermodynamic Properties of Fluids Thermodynamic Properties of fluids Most useful properties: Properties like pressure, volume and temperature which can be measured
More informationChapter 12. Insert picture from First page of chapter. Intermolecular Forces and the Physical Properties of Liquids and Solids
Chapter 12 Insert picture from First page of chapter Intermolecular Forces and the Physical Properties of Liquids and Solids Copyright McGraw-Hill 2009 1 12.1 Intermolecular Forces Intermolecular forces
More informationAlthough different gasses may differ widely in their chemical properties, they share many physical properties
States of Matter Gases Characteristics of Gases Although different gasses may differ widely in their chemical properties, they share many physical properties Substances that are liquids or solids under
More informationPhase Change DIagram
States of Matter Phase Change DIagram Phase Change Temperature remains during a phase change. Water phase changes Phase Diagram What is a phase diagram? (phase diagram for water) Normal melting point:
More informationThe fundamental difference between. particles.
Gases, Liquids and Solids David A. Katz Department of Chemistry Pima Community College States of Matter The fundamental difference between states t of matter is the distance between particles. States of
More informationREVISION: GAS LAWS & MOLE CALCULATIONS 18 JUNE 2013
REVISION: GAS LAWS & MOLE CALCULATIONS 18 JUNE 2013 Lesson Description In this lesson we revise how to: apply the gas laws to perform calculations apply the mole concept to perform calculations Key Concepts
More informationCh10.4 Attractive Forces
Ch10.4 Attractive Forces Intermolecular Forces are the forces holding molecules to each other. Solids have strong forces Gases (vapor) have weak forces Intermolecular forces determine the phase of matter.
More informationName Date Class THE NATURE OF GASES
13.1 THE NATURE OF GASES Section Review Objectives Describe the assumptions of the kinetic theory as it applies to gases Interpret gas pressure in terms of kinetic theory Define the relationship between
More informationSCH 3UI Unit 08 Outline: Kinetic Molecular Theory and the Gas Laws. The States of Matter Characteristics of. Solids, Liquids and Gases
SCH 3UI Unit 08 Outline: Kinetic Molecular Theory and the Gas Laws Lesson Topics Covered Handouts to Print 1 Note: The States of Matter solids, liquids and gases state and the polarity of molecules the
More informationExample Problems: 1.) What is the partial pressure of: Total moles = 13.2 moles 5.0 mol A 7.0 mol B 1.2 mol C Total Pressure = 3.
5.6 Dalton s Law of Partial Pressures Dalton s Law of Partial Pressure; The total pressure of a gas is the sum of all its parts. P total = P 1 + P + P 3 + P n Pressures are directly related to moles: n
More informationChemistry: The Central Science
Chemistry: The Central Science Fourteenth Edition Chapter 11 Liquids and Intermolecular Forces Intermolecular Forces The attractions between molecules are not nearly as strong as the intramolecular attractions
More informationIdeal Gas Behavior. NC State University
Chemistry 331 Lecture 6 Ideal Gas Behavior NC State University Macroscopic variables P, T Pressure is a force per unit area (P= F/A) The force arises from the change in momentum as particles hit an object
More informationThe Kinetic-Molecular Theory of Gases
The Kinetic-Molecular Theory of Gases kinetic-molecular theory of gases Originated with Ludwig Boltzman and James Clerk Maxwell in the 19th century Explains gas behavior on the basis of the motion of individual
More informationClass XI Chapter 5 States of Matter Chemistry
Question 5.1: What will be the minimum pressure required to compress 500 dm 3 of air at 1 bar to 200 dm 3 at 30 C? Initial pressure, p 1 = 1 bar Initial volume, V 1 = 500 dm 3 Final volume, V 2 = 200 dm
More informationChapter 10 Gases Characteristics of Gases Elements that exist as gases: Noble gases, O 2, N 2,H 2, F 2 and Cl 2. (For compounds see table 10.
Chapter 10 Gases 10.1 Characteristics of Gases Elements that exist as gases: Noble gases, O 2, N 2,H 2, F 2 and Cl 2. (For compounds see table 10.1) Unlike liquids and solids, gases expand to fill their
More informationOUTLINE. States of Matter, Forces of Attraction Phase Changes Gases The Ideal Gas Law Gas Stoichiometry
UNIT 6 GASES OUTLINE States of Matter, Forces of Attraction Phase Changes Gases The Ideal Gas Law Gas Stoichiometry STATES OF MATTER Remember that all matter exists in three physical states: Solid Liquid
More informationGas Density. Standard T & P (STP) 10/29/2011. At STP, 1 mol of any ideal gas occupies 22.4 L. T = 273 K (0 o C) P = 1 atm = kpa = 1.
Standard T & P (STP) T = 73 K (0 o C) P = 1 atm = 101.35 kpa = 1.0135 bar At STP, 1 mol of any ideal gas occupies.4 L.4 L Gas Density We can use PV = nrt to determine the density of gases. What are the
More informationChapter 5. Gases and the Kinetic-Molecular Theory
Chapter 5 Gases and the Kinetic-Molecular Theory Macroscopic vs. Microscopic Representation Kinetic Molecular Theory of Gases 1. Gas molecules are in constant motion in random directions. Collisions among
More informationINTRODUCTORY CHEMISTRY Concepts and Critical Thinking
INTRODUCTORY CHEMISTRY Concepts and Critical Thinking Sixth Edition by Charles H. Corwin Chapter 11 The Gaseous State by Christopher Hamaker 2011 Pearson Education, Inc. Chapter 11 1 Properties of Gases
More informationSection Using Gas Laws to Solve Problems
Gases and Gas Laws Section 13.2 Using Gas Laws to Solve Problems Kinetic Molecular Theory Particles of matter are ALWAYS in motion Volume of individual particles is zero. Consists of large number of particles
More informationChemistry Joke. Once you ve seen 6.02 x You ve seen a mole!
States of Matter Chemistry Joke Once you ve seen 6.02 x 10 23 atoms You ve seen a mole! Kinetic Theory Kinetic Theory explains the states of matter based on the concept that the particles in all forms
More information