GAS. Outline. Experiments. Device for in-class thought experiments to prove 1 st law. First law of thermodynamics Closed systems (no mass flow)

Size: px
Start display at page:

Download "GAS. Outline. Experiments. Device for in-class thought experiments to prove 1 st law. First law of thermodynamics Closed systems (no mass flow)"

Transcription

1 Outline First law of thermodynamics Closed systems (no mass flow) Device for in-class thought experiments to prove 1 st law Rubber stops GAS Features: Quasi-equlibrium expansion/compression Constant volume option Insulated (adiabatic) Non-QE shaft work Heat addition/rejection ICE Experiments Starting from state 1, consider... Insulated (adiabatic), fix volume, do 8 kj of shaft work on system. Then measure change in energy to be 8 kj so Wsh = E2 E1 = E Insulated, compress gas doing 10 kj of boundary work. Then measure change in energy to be 10 kj Wb = E Initial conclusion: For adiabatic process, amount of work done is equal to change in energy for closed system W = E when Q = 0 1

2 More experiments Fix volume, no shaft work, add 10 kj of heat. Then measure change in energy to be 10 kj Q = E when W = 0 Add 15 kj of heat and do 6 kj of shaft work. Then measure change in energy to be 21 kj E = Q W Still more experiments From state 1 cause a change to state 2 by several processes Compress gas doing 9 kj of boundary work adiabatically so W = ( 9) = E Do 9 kj shaft work adiabatically so b W = ( 9) = E sh For all adiabatic processes between two specified states of closed system, net work is the same regardless of the nature of the system or details of the process Energy change of system during a process is equal to net work and heat transfer between the system and its surroundings Illustration 2

3 Summary of experimental findings For closed system (Joule, 1800s): Q W = E Net energy transfer to system as heat and work Net energy increase of system Above is first law of thermodynamics E is property (point function) Q, W are path functions (except when one or the other is zero) Other forms of the 1 st law Q W = E = U + KE + PE = m( u2 u1) + m ( V2 V1 ) + mg( z2 z1) 2 Q W = U (stationary system) q w = e (per unit mass) δ q δ w = de (differential form) de Qɺ Wɺ = (rate form) dt Q W = 0 (cyclic process) Example A rigid tank contains a hot fluid that is cooled while being stirred by a paddle wheel. Initially, the internal energy of the fluid is 800 kj. During the cooling process, the fluid loses 500 kj of heat, and the paddle wheel does 100 kj of work on the fluid. Determine the final internal energy of the fluid. Neglect the energy stored in the paddle wheel. Q W = E = U 500kJ + 100kJ = U U = U 800kJ U = 400kJ

4 Outline Phase and pure substance Features of phases of matter Phase change processes Property diagrams Phase and Pure substance Phase refers to quantity of matter that has same chemical composition and physical structure throughout e.g. all solid, all liquid, or all vapor (gas) A system can contain more than one phase e.g. system of liquid water and water vapor (steam) contains two phases A pure substance with fixed chemical composition throughout i.e. water, N 2, He, CO 2, etc. A mixture of chemical elements or compounds is still a pure substance as long as mixture is homogeneous i.e. air A mixture of two or more phases is still a pure substance as long as chemical composition of each phase is same i.e. ice and liquid water but not liquid and gaseous air Phases of a pure substance Solid molecules are closely packed and arranged in a 3D pattern (lattice) which is repeated throughout solid e.g. long range order Due to closely packed nature attractive forces between molecules are large and keep them at fixed positions e.g. definite shape and size Molecules maintain their position but oscillate about this equilibrium position and velocity of molecules is related to temperature Higher temperature results in higher velocity and may be high enough to overcome attractive forces and groups of molecules may break away - melting Temperature and molecular motions Molecular interactions 4

5 Phases (cont.) Liquid chunks of molecules float about each other but w/in each chunk molecules maintain orderly structure e.g. short range order Definite volume but fluid shape Slight increase in distance between molecules over solid (except water where solid is less dense ice floats in your drink) Phases (cont.) Gas molecules far apart w/ no molecular order Molecules move about at random colliding w/ each other and walls of container Shape and volume defined by container At low densities intermolecular forces are very small and collisions are the only mode of interaction i.e. ideal gas Much higher energy levels than liquid/solid Phase change schematic Gas Deposition Sublimation Solid Vaporization Freezing Condensation Melting Liquid ENTHALPY 5

6 Phase change processes Practical situations involve two phases of a pure substance existing in equilibrium Water exists as mixture of liquid and vapor in boiler and condenser of steam power plant Refrigerant turns from liquid to vapor in freezer Most important cases involve liquid and vapor phases We will illustrate using water... Constant pressure phase change experiment subcooled liquid What happens when we heat water at constant pressure? Consider water at 1 atm, 20 C, e.g. tap water, in a piston-cylinder device It is called compressed or subcooled liquid (CL or SL) because it is not about to vaporize (boil) Compressed suggests above boiling P at give T Subcooled suggests below boiling T at given P Saturated liquid state Add heat, T rises to say 40 C, liquid water expans slightly, specific volume increases, piston moves up slightly P still 1 atm (why?) Water still compressed liquid Add more heat until T=100C Still liquid but any more heat will cause vaporization Liquid about to boil is called saturated liquid (can t hold any more heat) (SL) 6

7 Saturate liquid-vapor mixture state Add more heat T=constant as energy goes into vaporization process (phase change); breaking bonds Midway we have ½ liquid and ½ vapor; continue to add heat until all liquid is vaporized Saturated liquid-vapor mixture (SLVM) Saturated vapor state Entire cylinder contains vapor Any heat loss, no matter how small, will cause some vapor to condense (phase change from vapor to liquid) Vapor is about to condense Saturated vapor (SV) Superheated vapor state Single-phase (vapor) Add heat T and specific volume increases At say 300 C if we transfer some heat away T will decrease but no condensation Not about to condense Superheated vapor (SHV) 7

8 T-v diagram of constant pressure phase change process SL SLVM SHV CL SV Saturation temperature and pressure The temperature at which water starts boiling depends on the pressure If pressure is fixed, so is boiling temperature For example, water boils at 100 C at 1 atm If P was 5 atm (add weights to piston) boiling would occur at C Saturation temperature and pressure (cont.) At given P, T at which pure substance starts boiling is saturation temperature T sat At given T, pressure for boiling is saturation pressure P sat Example: At P= kpa, T sat =100 C; at T=100 C, P sat = kpa T sat = f (P sat ) during phase change; not independent and cannot be used to fix state (see Fig. 2-12) 8

9 Repeat constant P phase change experiment at different P Add weights to piston to change P Water boils at higher T as P increases Specific volume of SL is larger Specific volume of SV is smaller than at 1 atm Horizontal line connecting SL and SV states shorter Critical point (next slide) Critical point Point at which SL and SV states identical Above critical point there is no sharp difference between liquid and vapor T cr, P cr, v cr = C, MPa, m3/kg For other substances critical point values tabulated in A-1 Connect the dots... SL/SV states connected by SL/SV lines They meet at critical point forming wet dome T=const. phase change by decreasing piston weight; note downward slope of T=cont. lines 9

10 Extension to include solid phase Most substances contract during solidification (freezing); except water which expands during freezing Under some conditions all three SLV phases can coexist in equilibrium On P-v or T-v diagrams these triple states form a triple line on a P-T diagram at triple point P-T diagram and triple point P-v-T surfaces Recall that state of a simple compressible substance is fixed by 2 independent, intensive properties e.g. state postulate Recall equation z=z(x,y) represents a surface in space, so we can represent P-v- T relationship as surface in space i.e. T-v space with P as height (see next slide) P-v, T-v, P-T diagrams are projections from this 3D plot 10

11 P-v-T surfaces Contract on freezing Expand on freezing (like water) Summary Is iced water a pure substance? What is the difference between saturated liquid and compressed liquid? What is the difference saturated vapor and superheated vapor? Is there any difference between the properties of saturated vapor at a given temperature and the vapor of a saturated liquid-vapor mixture at the same temperature? Is it true that water boils at higher temperatures at higher pressures? Explain. What is the difference between the critical point and the triple point? Outline Property tables Property evaluations 11

12 Property tables Properties are listed in the form of tables i.e. steam tables SI and English unit versions They list property information for each region of interest, such as SHV, CL, and SLVM regions Looking at steam tables you find enthalpy, h, and entropy, s, which we have not discussed yet Entropy later, enthalpy now... H=U+PV (kj) or h=u+pv (kj/kg) P, T, v, u, h, and s data are tabulated Saturated water tables (A-2 T table, A-3 P table) u = u u h = h h fg g f fg g f s = s s fg g f Examples A rigid tank contains 50 kg of saturate liquid water at 90 C. Determine the pressure in the tank and volume in the tank. P = P = bar = kpa ( A 4) υ = υ = m / kg ( A 4) V = mυ = (50 kg)( m / kg) = m 3 3 Can you confirm these numbers from the tables listed? 12

13 Examples A piston-cylinder device contains 2ft 3 of saturated water vapor at 50 psia. Determine T of vapor and mass of vapor inside cylinder. T = T = F ( A 3 E) psia υ = υ = psia ft / lbm ( A 3 E) 3 V 2 ft m = = = 0.235lbm 3 υ ft / lbm Can you confirm these numbers from the tables listed? Saturated liquid-vapor mixture During vaporization substance exists as part liquid and part vapor i.e. mixture of SL and SV We need to know proportions of each phase in mixture We define quality, x, as ratio of mass of vapor to total mass of mixture m vapor x mtotal = mliq + mvap = m f + mg mtotal x always between 0 and 1, i.e. x=0 for SL and x=1 for SV x can be used as one of two independent, intensive properties to fix state Properties of SL and SV are same in mixture as if alone SLVM properties We normally pretend SLVM is homogeneous mixture V = V + V mυ = m υ + m υ f g t av f f g g ( ) ( ) m = m m mυ = m m υ + m υ f t g t av t g f g g m υ = (1 x) υ + xυ = υ + xυ t av f g f fg x = υ υ / υ av f fg x has no meaning outside of the wet dome f ( ) / y = y + x y x = y y y y y y f fg f fg g (usually drop av subscript) 13

14 Quality on the wet dome x = 0.5 x = 0 x = 1 ( ) / x = υ υ υ av f fg υ f υ av υg Examples A rigid tank with 10 kg of water at 90 C. If 8 kg of water is in liquid form and rest is in vapor form, determine (a) P in tank, (b) V of tank. OR P = P = kpa ( A 2) υ = m / kg, υ = m / kg ( A 2) 3 3 C V = V + V = m υ + m υ f g f f g g = (8 kg)( m / kg) + 2(2.361 m / kg) = 4.73m x = m / m = 2 /10 = 0.2 υ = υ + xυ = g t f fg 3 3 = m / kg + 0.2( ) m / kg = m / kg V = mυ = 10(0.473) = 4.73m 3 3 Superheated vapor Table A-4 Single phase region to right of SV line T, P independent and fix state P<P sat at given T T>T sat at given P v, u, h > SV values at given P or T 14

15 Example Find internal energy of water at 20 psia and 400 F psia = F ( A 3 E); T > T SHV ; u = Btu / lbm( A 4 E) sat Find temperature of water at P=0.5 MPa and h=2890 kj/kg = kj / kg; h > hg SHV T = 216.4C T, C h, kj / kg Linear interpolation Assumes any two data points connected by straight line (set slopes equal to find missing value) A B X x 5 = 10 5 Compressed liquid Not much data due to relative independence of CL properties with pressure They are incompressible i.e. change in pressure barely changes v, T, u, etc. A good approximation if data is unavailable is to treat CL as SL at same T (properties of CL due vary with T) y y T h T + v f ( P Psat ) P>P sat at given T (CL) and T<T sat at given P (SC) v, u, h < SL values at given P or T 15

16 Example Determine internal energy of CL water at 80 C and 5 MPa using (a) data from CL table and (b) SL data. Error? P = 47.4 kpa; P = 5MPa > P sat@80c sat CL u = kj / kg vs. u u = kj / kg (0.34%) Reference state and values u,h,s cannot be measured directly P,T,v can be measured directly Changes in u, h, s computed using derived relations with P, T, v Note: only changes can be computed not u, h, s, at specific state But fortunately in 1 st and 2 nd law s only changes in these properties is needed We choose a convenient reference state and ste properties to zero at that state For water, u=0, s=0, at 0.01C for SL state; h=u+pv; could have negative values relative to reference; different ref. state for different substances; ref. state cancels out ( ref ) ( ref ) u u u u = u u = u Summary What does the saturated water table represent? What is quality? Does it have any meaning in SHV region? What if h data is needed at T=125 C and the table only lists h data at T=100 and T=150 C? In the absence of CL tables, how is specific volume of CL at given P and T determined? Does reference point selected for properties of a substance have any effect on thermodynamic analysis? Why? 16

Chapter 3 PROPERTIES OF PURE SUBSTANCES. Thermodynamics: An Engineering Approach, 6 th Edition Yunus A. Cengel, Michael A. Boles McGraw-Hill, 2008

Chapter 3 PROPERTIES OF PURE SUBSTANCES. Thermodynamics: An Engineering Approach, 6 th Edition Yunus A. Cengel, Michael A. Boles McGraw-Hill, 2008 Chapter 3 PROPERTIES OF PURE SUBSTANCES Thermodynamics: An Engineering Approach, 6 th Edition Yunus A. Cengel, Michael A. Boles McGraw-Hill, 2008 Objectives Introduce the concept of a pure substance. Discuss

More information

Pure Substance Properties and Equation of State

Pure Substance Properties and Equation of State Pure Substance Properties and Equation of State Pure Substance Content Pure Substance A substance that has a fixed chemical composition throughout is called a pure substance. Water, nitrogen, helium, and

More information

Outline. Example. Solution. Property evaluation examples Specific heat Internal energy, enthalpy, and specific heats of solids and liquids Examples

Outline. Example. Solution. Property evaluation examples Specific heat Internal energy, enthalpy, and specific heats of solids and liquids Examples Outline Property ealuation examples Specific heat Internal energy, enthalpy, and specific heats of solids and liquids s A piston-cylinder deice initially contains 0.5m of saturated water apor at 00kPa.

More information

III. Evaluating Properties. III. Evaluating Properties

III. Evaluating Properties. III. Evaluating Properties F. Property Tables 1. What s in the tables and why specific volumes, v (m /kg) (as v, v i, v f, v g ) pressure, P (kpa) temperature, T (C) internal energy, u (kj/kg) (as u, u i, u f, u g, u ig, u fg )

More information

PROPERTIES OF PURE SUBSTANCES. Chapter 3. Mehmet Kanoglu. Thermodynamics: An Engineering Approach, 6 th Edition. Yunus A. Cengel, Michael A.

PROPERTIES OF PURE SUBSTANCES. Chapter 3. Mehmet Kanoglu. Thermodynamics: An Engineering Approach, 6 th Edition. Yunus A. Cengel, Michael A. Thermodynamics: An Engineering Approach, 6 th Edition Yunus A. Cengel, Michael A. Boles McGraw-Hill, 2008 Chapter 3 PROPERTIES OF PURE SUBSTANCES Mehmet Kanoglu Copyright The McGraw-Hill Companies, Inc.

More information

Thermodynamics I. Properties of Pure Substances

Thermodynamics I. Properties of Pure Substances Thermodynamics I Properties of Pure Substances Dr.-Eng. Zayed Al-Hamamre 1 Content Pure substance Phases of a pure substance Phase-change processes of pure substances o Compressed liquid, Saturated liquid,

More information

Chapter 3 PROPERTIES OF PURE SUBSTANCES

Chapter 3 PROPERTIES OF PURE SUBSTANCES Thermodynamics: An Engineering Approach Seventh Edition Yunus A. Cengel, Michael A. Boles McGraw-Hill, 2011 Chapter 3 PROPERTIES OF PURE SUBSTANCES Copyright The McGraw-Hill Companies, Inc. Permission

More information

Chapter 3 PROPERTIES OF PURE SUBSTANCES SUMMARY

Chapter 3 PROPERTIES OF PURE SUBSTANCES SUMMARY Chapter 3 PROPERTIES OF PURE SUBSTANCES SUMMARY PURE SUBSTANCE Pure substance: A substance that has a fixed chemical composition throughout. Compressed liquid (sub-cooled liquid): A substance that it is

More information

first law of ThermodyNamics

first law of ThermodyNamics first law of ThermodyNamics First law of thermodynamics - Principle of conservation of energy - Energy can be neither created nor destroyed Basic statement When any closed system is taken through a cycle,

More information

ME 2322 Thermodynamics I PRE-LECTURE Lesson 10 Complete the items below Name:

ME 2322 Thermodynamics I PRE-LECTURE Lesson 10 Complete the items below Name: Lesson 10 1. (5 pt) If P > P sat (T), the phase is a subcooled liquid. 2. (5 pt) if P < P sat (T), the phase is superheated vapor. 3. (5 pt) if T > T sat (P), the phase is superheated vapor. 4. (5 pt)

More information

EVALUATING PROPERTIES FOR A PURE SUBSTANCES. By Ertanto Vetra

EVALUATING PROPERTIES FOR A PURE SUBSTANCES. By Ertanto Vetra EVALUATING PROPERTIES FOR A PURE SUBSTANCES 1 By Ertanto Vetra Outlines - TV, PV, PT, PVT Diagram - Property Tables - Introduction to Enthalpy - Reference State & Reference Values - Ideal Gas Equation

More information

Basic Thermodynamics Module 1

Basic Thermodynamics Module 1 Basic Thermodynamics Module 1 Lecture 9: Thermodynamic Properties of Fluids Thermodynamic Properties of fluids Most useful properties: Properties like pressure, volume and temperature which can be measured

More information

Chapter 3 PROPERTIES OF PURE SUBSTANCES

Chapter 3 PROPERTIES OF PURE SUBSTANCES Thermodynamics: An Engineering Approach Seventh Edition in SI Units Yunus A. Cengel, Michael A. Boles McGraw-Hill, 2011 Chapter 3 PROPERTIES OF PURE SUBSTANCES Copyright The McGraw-Hill Companies, Inc.

More information

Chapter 4. Energy Analysis of Closed Systems

Chapter 4. Energy Analysis of Closed Systems Chapter 4 Energy Analysis of Closed Systems The first law of thermodynamics is an expression of the conservation of energy principle. Energy can cross the boundaries of a closed system in the form of heat

More information

CHAPTER. Properties of Pure Substances

CHAPTER. Properties of Pure Substances CHAPTER 2 Properties of Pure Substances A Pure Substance Is a substance that is chemically homogenous and fixed in chemical composition.(e.g. water, nitrogen, air & etc.) mixture of oil and water is not

More information

ME Thermodynamics I = = = 98.3% 1

ME Thermodynamics I = = = 98.3% 1 HW-08 (25 points) i) : a) 1 Since ν f < ν < ν g we conclude the state is a Saturated Liquid-Vapor Mixture (SLVM) 1, from the saturation tables we obtain p 3.6154 bar. 1 Calculating the quality, x: x ν

More information

Chapter 3 PROPERTIES OF PURE SUBSTANCES

Chapter 3 PROPERTIES OF PURE SUBSTANCES Chapter 3 PROPERTIES OF PURE SUBSTANCES PURE SUBSTANCE Pure substance: A substance that has a fixed chemical composition throughout. Air is a mixture of several gases, but it is considered to be a pure

More information

Chapter 7. Entropy. by Asst.Prof. Dr.Woranee Paengjuntuek and Asst. Prof. Dr.Worarattana Pattaraprakorn

Chapter 7. Entropy. by Asst.Prof. Dr.Woranee Paengjuntuek and Asst. Prof. Dr.Worarattana Pattaraprakorn Chapter 7 Entropy by Asst.Prof. Dr.Woranee Paengjuntuek and Asst. Prof. Dr.Worarattana Pattaraprakorn Reference: Cengel, Yunus A. and Michael A. Boles, Thermodynamics: An Engineering Approach, 5th ed.,

More information

Name Date Class THE NATURE OF GASES

Name Date Class THE NATURE OF GASES 13.1 THE NATURE OF GASES Section Review Objectives Describe the assumptions of the kinetic theory as it applies to gases Interpret gas pressure in terms of kinetic theory Define the relationship between

More information

To receive full credit all work must be clearly provided. Please use units in all answers.

To receive full credit all work must be clearly provided. Please use units in all answers. Exam is Open Textbook, Open Class Notes, Computers can be used (Computer limited to class notes, lectures, homework, book material, calculator, conversion utilities, etc. No searching for similar problems

More information

Thermodynamics I Chapter 2 Properties of Pure Substances

Thermodynamics I Chapter 2 Properties of Pure Substances Thermodynamics I Chapter 2 Properties of Pure Substances Mohsin Mohd Sies Fakulti Kejuruteraan Mekanikal, Universiti Teknologi Malaysia Properties of Pure Substances (Motivation) To quantify the changes

More information

Name: Self Assessment - Preparatory

Name: Self Assessment - Preparatory Name: Self Assessment - Preparatory 1. I have read the chapter before coming to the discussion session today. 2. I am able to state that a system is simply a space or mass that I choose to study. 3. I

More information

Changes of State. Substances in equilibrium change back and forth between states at equal speeds. Main Idea

Changes of State. Substances in equilibrium change back and forth between states at equal speeds. Main Idea Section 4 s Substances in equilibrium change back and forth between states at equal speeds. A liquid boils when it has absorbed enough energy to evaporate. Freezing occurs when a substance loses enough

More information

Chapter 4: Properties of Pure Substances. Pure Substance. Phases of a Pure Substance. Phase-Change Processes of Pure Substances

Chapter 4: Properties of Pure Substances. Pure Substance. Phases of a Pure Substance. Phase-Change Processes of Pure Substances Chapter 4: roperties o ure Substances ure Substance A substance that has a ixed chemical composition throughout is called a pure substance such as water, air, and nitrogen A pure substance does not hae

More information

KNOWN: Data are provided for a closed system undergoing a process involving work, heat transfer, change in elevation, and change in velocity.

KNOWN: Data are provided for a closed system undergoing a process involving work, heat transfer, change in elevation, and change in velocity. Problem 44 A closed system of mass of 10 kg undergoes a process during which there is energy transfer by work from the system of 0147 kj per kg, an elevation decrease of 50 m, and an increase in velocity

More information

Matter changes phase when energy is added or removed

Matter changes phase when energy is added or removed Section 12.4 Phase Changes Explain how the addition and removal of energy can cause a phase change. Interpret a phase diagram. Matter changes phase when energy is added or removed Energy Changes Accompanying

More information

Dishwasher. Heater. Homework Solutions ME Thermodynamics I Spring HW-1 (25 points)

Dishwasher. Heater. Homework Solutions ME Thermodynamics I Spring HW-1 (25 points) HW-1 (25 points) (a) Given: 1 for writing given, find, EFD, etc., Schematic of a household piping system Find: Identify system and location on the system boundary where the system interacts with the environment

More information

CHAPTER 7 ENTROPY. Copyright Hany A. Al-Ansary and S. I. Abdel-Khalik (2014) 1

CHAPTER 7 ENTROPY. Copyright Hany A. Al-Ansary and S. I. Abdel-Khalik (2014) 1 CHAPTER 7 ENTROPY S. I. Abdel-Khalik (2014) 1 ENTROPY The Clausius Inequality The Clausius inequality states that for for all cycles, reversible or irreversible, engines or refrigerators: For internally-reversible

More information

ME 300 Thermodynamics II

ME 300 Thermodynamics II ME 300 Thermodynamics II Prof. S. H. Frankel Fall 2006 ME 300 Thermodynamics II 1 Week 1 Introduction/Motivation Review Unsteady analysis NEW! ME 300 Thermodynamics II 2 Today s Outline Introductions/motivations

More information

Liquids & Solids: Section 12.3

Liquids & Solids: Section 12.3 Liquids & Solids: Section 12.3 MAIN IDEA: The particles in and have a range of motion and are not easily. Why is it more difficult to pour syrup that is stored in the refrigerator than in the cabinet?

More information

0.5 kpa (1000 Pa/kPa) *A. A = 70*9.81 N/500 N/m 2 = 1.37 m 2

0.5 kpa (1000 Pa/kPa) *A. A = 70*9.81 N/500 N/m 2 = 1.37 m 2 AREN 2110 Spring 2010 Homework #2: Due Friday, Jan 29, 6 PM Solutions 1. Consider a 70-kg woman who has a total footprint area of 400 cm2. She wishes to walk on the snow, but the snow cannot withstand

More information

PTT 277/3 APPLIED THERMODYNAMICS SEM 1 (2013/2014)

PTT 277/3 APPLIED THERMODYNAMICS SEM 1 (2013/2014) PTT 77/3 APPLIED THERMODYNAMICS SEM 1 (013/014) 1 Energy can exist in numerous forms: Thermal Mechanical Kinetic Potential Electric Magnetic Chemical Nuclear The total energy of a system on a unit mass:

More information

MAE 110A. Homework 3: Solutions 10/20/2017

MAE 110A. Homework 3: Solutions 10/20/2017 MAE 110A Homework 3: Solutions 10/20/2017 3.10: For H 2O, determine the specified property at the indicated state. Locate the state on a sketch of the T-v diagram. Given a) T 140 C, v 0.5 m 3 kg b) p 30MPa,

More information

Chapter 5. Mass and Energy Analysis of Control Volumes

Chapter 5. Mass and Energy Analysis of Control Volumes Chapter 5 Mass and Energy Analysis of Control Volumes Conservation Principles for Control volumes The conservation of mass and the conservation of energy principles for open systems (or control volumes)

More information

TDEC202 - Energy II (Recitation #3)

TDEC202 - Energy II (Recitation #3) TDEC202 - Energy II (Recitation #3) Summer Term, 2007 M. Carchidi Solution to Problem 3-029 We are given that the substance is R-134a and metric units so that Tables A-11, A-12 and A-13 in Appendix 1 will

More information

Chapter 10. Lesson Starter. Why did you not smell the odor of the vapor immediately? Explain this event in terms of the motion of molecules.

Chapter 10. Lesson Starter. Why did you not smell the odor of the vapor immediately? Explain this event in terms of the motion of molecules. Preview Lesson Starter Objectives The Kinetic-Molecular Theory of Gases The Kinetic-Molecular Theory and the Nature of Gases Deviations of Real Gases from Ideal Behavior Section 1 The Kinetic-Molecular

More information

Evaluating properties of pure substances

Evaluating properties of pure substances Evaluating properties of pure substances Pure substance A pure substance has the same chemical composition throughout. Are the following confined in a fixed volume pure substances: Ice (single component,

More information

I. (20%) Answer the following True (T) or False (F). If false, explain why for full credit.

I. (20%) Answer the following True (T) or False (F). If false, explain why for full credit. I. (20%) Answer the following True (T) or False (F). If false, explain why for full credit. Both the Kelvin and Fahrenheit scales are absolute temperature scales. Specific volume, v, is an intensive property,

More information

Chapter 5. Mass and Energy Analysis of Control Volumes. by Asst. Prof. Dr.Woranee Paengjuntuek and Asst. Prof. Dr.Worarattana Pattaraprakorn

Chapter 5. Mass and Energy Analysis of Control Volumes. by Asst. Prof. Dr.Woranee Paengjuntuek and Asst. Prof. Dr.Worarattana Pattaraprakorn Chapter 5 Mass and Energy Analysis of Control Volumes by Asst. Prof. Dr.Woranee Paengjuntuek and Asst. Prof. Dr.Worarattana Pattaraprakorn Reference: Cengel, Yunus A. and Michael A. Boles, Thermodynamics:

More information

ME Thermodynamics I

ME Thermodynamics I Homework - Week 01 HW-01 (25 points) Given: 5 Schematic of the solar cell/solar panel Find: 5 Identify the system and the heat/work interactions associated with it. Show the direction of the interactions.

More information

Chemistry Joke. Once you ve seen 6.02 x You ve seen a mole!

Chemistry Joke. Once you ve seen 6.02 x You ve seen a mole! States of Matter Chemistry Joke Once you ve seen 6.02 x 10 23 atoms You ve seen a mole! Kinetic Theory Kinetic Theory explains the states of matter based on the concept that the particles in all forms

More information

Content. Entropy and principle of increasing entropy. Change of entropy in an ideal gas.

Content. Entropy and principle of increasing entropy. Change of entropy in an ideal gas. Entropy Content Entropy and principle of increasing entropy. Change of entropy in an ideal gas. Entropy Entropy can be viewed as a measure of molecular disorder, or molecular randomness. As a system becomes

More information

ECE309 INTRODUCTION TO THERMODYNAMICS & HEAT TRANSFER. 13 June 2007

ECE309 INTRODUCTION TO THERMODYNAMICS & HEAT TRANSFER. 13 June 2007 ECE309 INTRODUCTION TO THERMODYNAMICS & HEAT TRANSFER 13 June 2007 Midterm Examination R. Culham This is a 2 hour, open-book examination. You are permitted to use: course text book calculator There are

More information

FINAL EXAM. ME 200 Thermodynamics I, Spring 2013 CIRCLE YOUR LECTURE BELOW:

FINAL EXAM. ME 200 Thermodynamics I, Spring 2013 CIRCLE YOUR LECTURE BELOW: ME 200 Thermodynamics I, Spring 2013 CIRCLE YOUR LECTURE BELOW: Div. 5 7:30 am Div. 2 10:30 am Div. 4 12:30 am Prof. Naik Prof. Braun Prof. Bae Div. 3 2:30 pm Div. 1 4:30 pm Div. 6 4:30 pm Prof. Chen Prof.

More information

The First Law of Thermodynamics. By: Yidnekachew Messele

The First Law of Thermodynamics. By: Yidnekachew Messele The First Law of Thermodynamics By: Yidnekachew Messele It is the law that relates the various forms of energies for system of different types. It is simply the expression of the conservation of energy

More information

CHEMISTRY Matter and Change. Chapter 12: States of Matter

CHEMISTRY Matter and Change. Chapter 12: States of Matter CHEMISTRY Matter and Change Chapter 12: States of Matter CHAPTER 12 States of Matter Section 12.1 Section 12.2 Section 12.3 Section 12.4 Gases Forces of Attraction Liquids and Solids Phase Changes Click

More information

R13. II B. Tech I Semester Regular Examinations, Jan THERMODYNAMICS (Com. to ME, AE, AME) PART- A

R13. II B. Tech I Semester Regular Examinations, Jan THERMODYNAMICS (Com. to ME, AE, AME) PART- A SET - 1 II B. Tech I Semester Regular Examinations, Jan - 2015 THERMODYNAMICS (Com. to ME, AE, AME) Time: 3 hours Max. Marks: 70 Note 1. Question Paper consists of two parts (Part-A and Part-B) 2. Answer

More information

Name Date Class STATES OF MATTER

Name Date Class STATES OF MATTER 13 STATES OF MATTER Chapter Test A A. Matching Match each description in Column B with the correct term in Column A. Write the letter of the correct description on the line. Column A Column B 1. amorphous

More information

ME 201 Thermodynamics

ME 201 Thermodynamics ME 0 Thermodynamics Solutions First Law Practice Problems. Consider a balloon that has been blown up inside a building and has been allowed to come to equilibrium with the inside temperature of 5 C and

More information

Basic Thermodynamics Prof. S. K. Som Department of Mechanical Engineering Indian Institute of Technology, Kharagpur. Lecture No 16

Basic Thermodynamics Prof. S. K. Som Department of Mechanical Engineering Indian Institute of Technology, Kharagpur. Lecture No 16 Basic Thermodynamics Prof. S. K. Som Department of Mechanical Engineering Indian Institute of Technology, Kharagpur Lecture No 16 Properties of Pure Substances-I Good afternoon. In the last class, we were

More information

Chapter 2: The Physical Properties of Pure Compounds

Chapter 2: The Physical Properties of Pure Compounds Chapter 2: The Physical Properties of Pure Compounds 2-10. The boiler is an important unit operation in the Rankine cycle. This problem further explores the phenomenon of boiling. A. When you are heating

More information

Thermodynamics of solids 5. Unary systems. Kwangheon Park Kyung Hee University Department of Nuclear Engineering

Thermodynamics of solids 5. Unary systems. Kwangheon Park Kyung Hee University Department of Nuclear Engineering Thermodynamics of solids 5. Unary systems Kwangheon ark Kyung Hee University Department of Nuclear Engineering 5.1. Unary heterogeneous system definition Unary system: one component system. Unary heterogeneous

More information

ME 201 Thermodynamics

ME 201 Thermodynamics Fall 204 ME 20 Thermodynamics Homework #8 Solutions. A rigid wall, insulated container is divided into two regions by a removable wall. One region contains 0. lb m of CO at 00 F, while the other region

More information

Chapter 10 States of Matter

Chapter 10 States of Matter Chapter 10 States of Matter 1 Section 10.1 The Nature of Gases Objectives: Describe the assumptions of the kinetic theory as it applies to gases. Interpret gas pressure in terms of kinetic theory. Define

More information

Pure Substances Phase Change, Property Tables and Diagrams

Pure Substances Phase Change, Property Tables and Diagrams Pure Substances Phase Change, Property Tables and Diagrams In this chapter we consider the property values and relationships of a pure substance (such as water) which can exist in three phases - solid,

More information

ME 201 Thermodynamics

ME 201 Thermodynamics Spring 01 ME 01 Thermodynamics Property Evaluation Practice Problems II Solutions 1. Air at 100 K and 1 MPa goes to MPa isenthapically. Determine the entropy change. Substance Type: Ideal Gas (air) Process:

More information

Chapter 5: The First Law of Thermodynamics: Closed Systems

Chapter 5: The First Law of Thermodynamics: Closed Systems Chapter 5: The First Law of Thermodynamics: Closed Systems The first law of thermodynamics can be simply stated as follows: during an interaction between a system and its surroundings, the amount of energy

More information

ME 200 Final Exam December 14, :00 a.m. to 10:00 a.m.

ME 200 Final Exam December 14, :00 a.m. to 10:00 a.m. CIRCLE YOUR LECTURE BELOW: First Name Last Name 7:30 a.m. 8:30 a.m. 10:30 a.m. 11:30 a.m. Boregowda Boregowda Braun Bae 2:30 p.m. 3:30 p.m. 4:30 p.m. Meyer Naik Hess ME 200 Final Exam December 14, 2015

More information

CHAPTER 10. States of Matter

CHAPTER 10. States of Matter CHAPTER 10 States of Matter Kinetic Molecular Theory Kinetikos - Moving Based on the idea that particles of matter are always in motion The motion has consequences Explains the behavior of Gases, Liquids,

More information

CHAPTER 10. Kinetic Molecular Theory. Five Assumptions of the KMT. Atmospheric Pressure

CHAPTER 10. Kinetic Molecular Theory. Five Assumptions of the KMT. Atmospheric Pressure Kinetic Molecular Theory CHAPTER 10 States of Matter Kinetikos - Moving Based on the idea that particles of matter are always in motion The motion has consequences Explains the behavior of Gases, Liquids,

More information

- Apply closed system energy balances, observe sign convention for work and heat transfer.

- Apply closed system energy balances, observe sign convention for work and heat transfer. CHAPTER : ENERGY AND THE FIRST LAW OF THERMODYNAMICS Objectives: - In this chapter we discuss energy and develop equations for applying the principle of conservation of energy. Learning Outcomes: - Demonstrate

More information

ME Thermodynamics I. Lecture Notes and Example Problems

ME Thermodynamics I. Lecture Notes and Example Problems ME 227.3 Thermodynamics I Lecture Notes and Example Problems James D. Bugg September 2018 Department of Mechanical Engineering Introduction Part I: Lecture Notes This part contains handout versions of

More information

This follows from the Clausius inequality as a consequence of the second law of thermodynamics. Therefore. (for reversible process only) (22.

This follows from the Clausius inequality as a consequence of the second law of thermodynamics. Therefore. (for reversible process only) (22. Entropy Clausius inequality can be used to analyze the cyclic process in a quantitative manner. The second law became a law of wider applicability when Clausius introduced the property called entropy.

More information

5/6/ :41 PM. Chapter 6. Using Entropy. Dr. Mohammad Abuhaiba, PE

5/6/ :41 PM. Chapter 6. Using Entropy. Dr. Mohammad Abuhaiba, PE Chapter 6 Using Entropy 1 2 Chapter Objective Means are introduced for analyzing systems from the 2 nd law perspective as they undergo processes that are not necessarily cycles. Objective: introduce entropy

More information

Find: a) Mass of the air, in kg, b) final temperature of the air, in K, and c) amount of entropy produced, in kj/k.

Find: a) Mass of the air, in kg, b) final temperature of the air, in K, and c) amount of entropy produced, in kj/k. PROBLEM 6.25 Three m 3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 295 K, 200 kpa. The air receives 1546 kj of work from the paddle wheel. Assuming the ideal gas model,

More information

Energy and Energy Balances

Energy and Energy Balances Energy and Energy Balances help us account for the total energy required for a process to run Minimizing wasted energy is crucial in Energy, like mass, is. This is the Components of Total Energy energy

More information

Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday, Wednesday 8:00am - 10:00am & Monday 8:00am - 9:00am MEP 261 Class ZA

Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday, Wednesday 8:00am - 10:00am & Monday 8:00am - 9:00am MEP 261 Class ZA Thermodynamics I Spring 1432/1433H (2011/2012H) Saturday, Wednesday 8:00am - 10:00am & Monday 8:00am - 9:00am MEP 261 Class ZA Dr. Walid A. Aissa Associate Professor, Mech. Engg. Dept. Faculty of Engineering

More information

ECE309 THERMODYNAMICS & HEAT TRANSFER MIDTERM EXAMINATION. Instructor: R. Culham. Name: Student ID Number:

ECE309 THERMODYNAMICS & HEAT TRANSFER MIDTERM EXAMINATION. Instructor: R. Culham. Name: Student ID Number: ECE309 THERMODYNAMICS & HEAT TRANSFER MIDTERM EXAMINATION June 19, 2015 2:30 pm - 4:30 pm Instructor: R. Culham Name: Student ID Number: Instructions 1. This is a 2 hour, closed-book examination. 2. Permitted

More information

Phase Diagrams. Department of Mechanical Engineering Indian Institute of Technology Kanpur Kanpur India

Phase Diagrams. Department of Mechanical Engineering Indian Institute of Technology Kanpur Kanpur India Phase Diagrams 1 Increasing the temperature isobarically T-v diagram of constant-pressure phase-change processes of a pure substance at various pressures numerical values are for water. 2 Temperature -

More information

Name Date Class STATES OF MATTER. Match the correct state of matter with each description of water by writing a letter on each line.

Name Date Class STATES OF MATTER. Match the correct state of matter with each description of water by writing a letter on each line. 10 STATES OF MATTER SECTION 10.1 THE NATURE OF GASES (pages 267 272) This section describes how the kinetic theory applies to gases. It defines gas pressure and explains how temperature is related to the

More information

solid IMF>liquid IMF>gas IMF Draw a diagram to represent the 3 common states of matter of a given substance: solid liquid gas

solid IMF>liquid IMF>gas IMF Draw a diagram to represent the 3 common states of matter of a given substance: solid liquid gas Thermochemistry Part 1 Notes States of Matter and Intermolecular Forces (IMF) Chemistry HP At the end of this unit, students should be able to: Describe the various states of matter in terms of kinetic

More information

First Law of Thermodynamics

First Law of Thermodynamics First Law of Thermodynamics During an interaction between a system and its surroundings, the amount of energy gained by the system must be exactly equal to the amount of energy lost by the surroundings.

More information

MARIA COLLEGE OF ENGINEERING AND TECHNOLOGY

MARIA COLLEGE OF ENGINEERING AND TECHNOLOGY MARIA COLLEGE OF ENGINEERING AND TECHNOLOGY ATTOOR ENGINEERING THERMODYNAMICS (TWO MARK QUESTION BANK) UNIT 1 (BASIC COMCEPTS AND FIRST LAW) 1. Define the term thermal engineering. Thermal engineering

More information

P6 Molecules and matter. Student Book answers. P6.1 Density. Question Answer Marks Guidance. 1 a m 3 (= 0.80 m 0.60 m 0.

P6 Molecules and matter. Student Book answers. P6.1 Density. Question Answer Marks Guidance. 1 a m 3 (= 0.80 m 0.60 m 0. P6. Density a 0.024 m 3 (= 0.80 m 0.60 m 0.05 m) b = 2500 kg/m 3 2 a 36 g 48 g = 88 g 2 b =. g/cm 3 3 a i 0.000 40 m 3 (= 0.0 m 0.080 m 0.05 m) 3 a ii = 9 000 kg/m 3 3 b v = = 7.9 0 8 m 3 thickness t =

More information

Lecture 29-30: Closed system entropy balance

Lecture 29-30: Closed system entropy balance ME 200 Thermodynamics I Spring 2016 Lecture 29-30: Closed system entropy balance Yong Li Shanghai Jiao Tong University Institute of Refrigeration and Cryogenics 800 Dong Chuan Road Shanghai, 200240, P.

More information

SOLUTION MANUAL ENGLISH UNIT PROBLEMS CHAPTER 3 SONNTAG BORGNAKKE VAN WYLEN. FUNDAMENTALS of. Thermodynamics. Sixth Edition

SOLUTION MANUAL ENGLISH UNIT PROBLEMS CHAPTER 3 SONNTAG BORGNAKKE VAN WYLEN. FUNDAMENTALS of. Thermodynamics. Sixth Edition SOLUTION MANUAL ENGLISH UNIT PROBLEMS CHAPTER 3 SONNTAG BORGNAKKE VAN WYLEN FUNDAMENTALS of Thermodynamics Sixth Edition CHAPTER 3 SUBSECTION PROB NO. Concept-Study Guide Problems 128-132 Phase diagrams

More information

CHM Solids, Liquids, and Phase Changes (r15) Charles Taylor 1/9

CHM Solids, Liquids, and Phase Changes (r15) Charles Taylor 1/9 CHM 111 - Solids, Liquids, and Phase Changes (r15) - 2015 Charles Taylor 1/9 Introduction In CHM 110, we used kinetic theory to explain the behavior of gases. Now, we will discuss solids and liquids. While

More information

Gases, Liquids and Solids

Gases, Liquids and Solids Chapter 5 Gases, Liquids and Solids The States of Matter Gases Pressure Forces between one molecule and another are called intermolecular forces. Intermolecular forces hold molecules together and kinetic

More information

THERMODYNAMICS NOTES. These notes give a brief overview of engineering thermodynamics. They are based on the thermodynamics text by Black & Hartley.

THERMODYNAMICS NOTES. These notes give a brief overview of engineering thermodynamics. They are based on the thermodynamics text by Black & Hartley. THERMODYNAMICS NOTES These notes give a brief overview of engineering thermodynamics. They are based on the thermodynamics text by Black & Hartley. Topics covered include: concepts; properties; conservation

More information

Non-Newtonian fluids is the fluids in which shear stress is not directly proportional to deformation rate, such as toothpaste,

Non-Newtonian fluids is the fluids in which shear stress is not directly proportional to deformation rate, such as toothpaste, CHAPTER1: Basic Definitions, Zeroth, First, and Second Laws of Thermodynamics 1.1. Definitions What does thermodynamic mean? It is a Greeks word which means a motion of the heat. Water is a liquid substance

More information

CONCEPTS AND DEFINITIONS. Prepared by Engr. John Paul Timola

CONCEPTS AND DEFINITIONS. Prepared by Engr. John Paul Timola CONCEPTS AND DEFINITIONS Prepared by Engr. John Paul Timola ENGINEERING THERMODYNAMICS Science that involves design and analysis of devices and systems for energy conversion Deals with heat and work and

More information

Most substances can be in three states: solid, liquid, and gas.

Most substances can be in three states: solid, liquid, and gas. States of Matter Most substances can be in three states: solid, liquid, and gas. Solid Particles Have Fixed Positions The particles in a solid are very close together and have an orderly, fixed arrangement.

More information

Chapter 1: Basic Definitions, Terminologies and Concepts

Chapter 1: Basic Definitions, Terminologies and Concepts Chapter : Basic Definitions, Terminologies and Concepts ---------------------------------------. UThermodynamics:U It is a basic science that deals with: -. Energy transformation from one form to another..

More information

Properties of Vapors

Properties of Vapors Properties of Vapors Topics for Discussion The Pressure/Temperature Relationship Vaporization Condensation Enthalpy Properties of Vapors Topics for Discussion Entropy Properties of Substances Saturated

More information

Solids (cont.) Describe the movement of particles in a solid and the forces between them.

Solids (cont.) Describe the movement of particles in a solid and the forces between them. Solids A solid is matter that has a definite shape and a definite volume. The attractive forces between the particles in a solid are strong and pull them close together. Solids (cont.) Describe the movement

More information

Homework - Lecture 11.

Homework - Lecture 11. Homework - Lecture 11. Name: Topic: Heat Capacity and Specific Heat Type: Numerical 1. Two liquids, A and B, are mixed together, and the resulting temperature is 22 C. If liquid A has mass m and was initially

More information

ME Thermodynamics I

ME Thermodynamics I HW-6 (5 points) Given: Carbon dioxide goes through an adiabatic process in a piston-cylinder assembly. provided. Find: Calculate the entropy change for each case: State data is a) Constant specific heats

More information

The physical state of a substance can be changed by increasing or decreasing its temperature.

The physical state of a substance can be changed by increasing or decreasing its temperature. Chemistry Lecture #63: Changes of State The physical state of a substance can be changed by increasing or decreasing its temperature. For example, a solid substance can be converted into a liquid by heating

More information

Thermodynamic Properties

Thermodynamic Properties Thermodynamic Properties (TP) Thermodynamic Properties Define and articulate some of the critical language and concepts of Thermodynamics Distinguish between the universe, system, surroundings, and boundary

More information

Pure substance-1. LIQUIFIED air is also a pure substance for the same reason.

Pure substance-1. LIQUIFIED air is also a pure substance for the same reason. Pure substance-1 A substance that has a fixed chemical composition throughout is called a pure substance. Now there are two important keywords in this: 1. Fixed Chemical Composition 2. Throughout I will

More information

Some notes on sigma and pi bonds:

Some notes on sigma and pi bonds: Some notes on sigma and pi bonds: SIGMA bonds are formed when orbitals overlap along the axis between two atoms. These bonds have good overlap between the bonding orbitals, meaning that they are strong.

More information

Energy: The ability to cause changes. thermodynamics stems from therme (heat) and dynamis (power).

Energy: The ability to cause changes. thermodynamics stems from therme (heat) and dynamis (power). Energy: The ability to cause changes. thermodynamics stems from therme (heat) and dynamis (power). Thermodynamics: The science of energy. Conservation of energy principle: During an interaction, energy

More information

ME6301- ENGINEERING THERMODYNAMICS UNIT I BASIC CONCEPT AND FIRST LAW PART-A

ME6301- ENGINEERING THERMODYNAMICS UNIT I BASIC CONCEPT AND FIRST LAW PART-A ME6301- ENGINEERING THERMODYNAMICS UNIT I BASIC CONCEPT AND FIRST LAW PART-A 1. What is meant by thermodynamics system? (A/M 2006) Thermodynamics system is defined as any space or matter or group of matter

More information

CHAPTER 5 MASS AND ENERGY ANALYSIS OF CONTROL VOLUMES

CHAPTER 5 MASS AND ENERGY ANALYSIS OF CONTROL VOLUMES Thermodynamics: An Engineering Approach 8th Edition in SI Units Yunus A. Çengel, Michael A. Boles McGraw-Hill, 2015 CHAPTER 5 MASS AND ENERGY ANALYSIS OF CONTROL VOLUMES Lecture slides by Dr. Fawzi Elfghi

More information

Thermodynamics Introduction and Basic Concepts

Thermodynamics Introduction and Basic Concepts Thermodynamics Introduction and Basic Concepts by Asst. Prof. Channarong Asavatesanupap Mechanical Engineering Department Faculty of Engineering Thammasat University 2 What is Thermodynamics? Thermodynamics

More information

Chapter 13 - States of Matter. Section 13.1 The nature of Gases

Chapter 13 - States of Matter. Section 13.1 The nature of Gases Chapter 13 - States of Matter Section 13.1 The nature of Gases Kinetic energy and gases Kinetic energy: the energy an object has because of its motion Kinetic theory: all matter is made if particles in

More information

CHAPTER 8 ENTROPY. Blank

CHAPTER 8 ENTROPY. Blank CHAPER 8 ENROPY Blank SONNAG/BORGNAKKE SUDY PROBLEM 8-8. A heat engine efficiency from the inequality of Clausius Consider an actual heat engine with efficiency of η working between reservoirs at and L.

More information

CHAPTER 13. States of Matter. Kinetic = motion. Polar vs. Nonpolar. Gases. Hon Chem 13.notebook

CHAPTER 13. States of Matter. Kinetic = motion. Polar vs. Nonpolar. Gases. Hon Chem 13.notebook CHAPTER 13 States of Matter States that the tiny particles in all forms of matter are in constant motion. Kinetic = motion A gas is composed of particles, usually molecules or atoms, with negligible volume

More information

Physics 111. Lecture 39 (Walker: 17.6, 18.2) Latent Heat Internal Energy First Law of Thermodynamics May 8, Latent Heats

Physics 111. Lecture 39 (Walker: 17.6, 18.2) Latent Heat Internal Energy First Law of Thermodynamics May 8, Latent Heats Physics 111 Lecture 39 (Walker: 17.6, 18.2) Latent Heat Internal Energy First Law of Thermodynamics May 8, 2009 Lecture 39 1/26 Latent Heats The heat required to convert from one phase to another is called

More information

Upon successful completion of this unit, the students should be able to:

Upon successful completion of this unit, the students should be able to: Unit 9. Liquids and Solids - ANSWERS Upon successful completion of this unit, the students should be able to: 9.1 List the various intermolecular attractions in liquids and solids (dipole-dipole, London

More information