Cree XLamp XP-C LEDs. Table of Contents. CLD-DS19 Rev 13D. Product family data sheet

Transcription

1 Cree XLamp XP-C LEDs Product family data sheet CLD-DS19 Rev 13D Product Description Features Table of Contents The XLamp XP-C LED combines the proven lighting-class performance and reliability of the XLamp XR-E LED in a package with 80% smaller footprint. The XLamp XP-C LED continues Cree s history of innovation in LEDs for lighting applications with wide viewing angle, symmetrical package, unlimited floor life and electrically neutral thermal path. Cree XLamp LEDs bring high performance and quality of light to a wide range of lighting applications, including colo changing lighting, portable and personal lighting, outdoor lighting, indoor directional lighting, commercial lighting and emergency vehicle lighting. Available in white (2600 K to 10,000 K CCT), royal blue, blue, green, amber, red orange, red Maximum drive current: up to 500 ma Low thermal resistance: as low as 10 C/W Wide viewing angle: Unlimited floor life at 30 ºC/85% RH Reflow solderable - JEDEC J-STD 020C compatible Electrically neutral thermal path RoHS and REACh compliant UL recognized component (E349212) Copyright Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and XLamp are registered trademarks and the Cree logo is a trademark of Characteristics...2 Flux Characteristics - White...3 Flux Characteristics - Color...7 Relative Spectral Power Distribution Relative Flux vs. Junction Temperature Electrical Characteristics Relative Flux vs. Current Typical Spatial Distribution Thermal Design Performance Groups - Luminous Flux Performance Groups - Radiant Flux Performance Groups - Chromaticity Performance Groups - Dominant Wavelength Performance Groups - Forward Voltage.. 22 Cree s Standard Chromaticity Regions Plotted on the 1931 CIE Curve Cree s Standard Cool White Kits Plotted on ANSI Standard Chromaticity Regions Cree s Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions Cree s Standard Chromaticity Kits Bin and Order Code Formats Reflow Soldering Characteristics Notes Mechanical Dimensions Tape and Reel Packaging Cree, Inc Silicon Drive Durham, NC USA Tel:

2 Characteristics Characteristics Unit Minimum Typical Maximum Thermal resistance, junction to solder point - white, royal blue, blue C/W 12 Thermal resistance, junction to solder point - green C/W 20 Thermal resistance, junction to solder point - amber C/W 15 Thermal resistance, junction to solder point - red, red-orange C/W 10 Viewing angle (FWHM) - white degrees 115 Viewing angle (FWHM) - royal blue, blue, green, red, red-orange, amber degrees 125 Temperature coefficient of voltage - white, blue, royal blue, green mv/ C -4.0 Temperature coefficient of voltage - amber, red-orange, red mv/ C -2.0 ESD withstand voltage (HBM per Mil-Std-883D) - white, royal blue, blue, green V 8000 ESD Classification (HBM per Mil-Std-883D) - amber, red-orange, red Class 2 DC forward current - white, royal blue, blue, green ma 500 DC forward current - amber, red-orange, red ma 350 Reverse voltage V 5 Forward voltage (@ 350 ma) - white V Forward voltage (@ 350 ma) - royal blue, blue V Forward voltage (@ 350 ma) - green V Forward voltage (@ 350 ma) - amber, red-orange, red V Forward voltage (@ 125 ma) - royal blue, blue V 3.1 Forward voltage (@ 125 ma) - green V 3.3 Forward voltage (@ 125 ma) - red-orange, red V 2.0 Forward voltage (@ 125 ma) - amber V 2.1 Forward voltage (@ 500 ma) - royal blue, blue, white V 3.5 Forward voltage (@ 500 ma) - green V 3.6 LED junction temperature C 150 2

3 Flux Characteristics - White (T J = 25 C) The following tables provide order codes for XLamp XP-C white LEDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 27). Minimum Luminous Flux 350 ma Chromaticity Regions Order Codes Group Flux (lm) Q Q Q4 100 Q5 107 WA, WB, WC, WD, WE, WF, WG, WH, WJ, WK, WM, WN, WP WC, WD, WF, WG WC, WD, WF, WG, WH, WJ, WN, WP WA, WB, WC, WD, WE, WF, WG, WH, WJ, WK, WM, WN, WP WC, WD, WF, WG WC, WD, WF, WG, WH, WJ, WN, WP WA, WB, WC, WD, WE, WF, WG, WH, WJ, WK, WM, WN, WP WC, WD, WF, WG WC, WD, WF, WG, WH, WJ, WN, WP WA, WB, WC, WD, WE, WF, WG, WH, WJ, WK, WM, WN, WP WC, WD, WF, WG WC, WD, WF, WG, WH, WJ, WN, WP XPCWHT-L A01 XPCWHT-L A02 XPCWHT-L A03 XPCWHT-L B01 XPCWHT-L B02 XPCWHT-L B03 XPCWHT-L C01 XPCWHT-L C02 XPCWHT-L C03 XPCWHT-L D01 XPCWHT-L D02 XPCWHT-L D03 Notes: Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 29). Cree XLamp XP-C LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. 3

4 Flux Characteristics - White (T J = 25 C) - Continued The following tables provide order codes for XLamp XP-C white LEDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 27). For definitions of the chromaticity kits, please see the Cree s Standard Chromaticity Kits section (page 27). Chromaticity Minimum Luminous Flux 350 ma Order Codes Kit CCT Code Flux (lm) 70 CRI Typical Q5 107 XPCWHT-L D K K K E K E K Q4 100 XPCWHT-L C51 Q XPCWHT-L B51 Q XPCWHT-L A51 Q5 107 XPCWHT-L D53 Q4 100 XPCWHT-L C53 Q XPCWHT-L B53 Q XPCWHT-L A53 Q5 107 XPCWHT-L D50 Q4 100 XPCWHT-L C50 Q XPCWHT-L B50 Q XPCWHT-L A50 Q5 107 XPCWHT-L DE1 Q4 100 XPCWHT-L CE1 Q XPCWHT-L BE1 Q XPCWHT-L AE1 Q5 107 XPCWHT-L DE2 Q4 100 XPCWHT-L CE2 Q XPCWHT-L BE2 Q XPCWHT-L AE2 Notes: Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 29). Cree XLamp XP-C LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. 4

5 Flux Characteristics - White (T J = 25 C) - Continued Chromaticity Minimum Luminous Flux 350 ma Order Codes Kit CCT Code Flux (lm) 75 CRI Typical Q XPCWHT-L AE3 E3 F4 E4 F5 E K 4750 K 4500 K 4250 K 4000 K P XPCWHT-L E3 P XPCWHT-L E3 Q XPCWHT-L AF4 P XPCWHT-L F4 P XPCWHT-L F4 Q XPCWHT-L AE4 P XPCWHT-L E4 Q XPCWHT-L AF5 P XPCWHT-L F5 P XPCWHT-L F5 P XPCWHT-L F5 Q XPCWHT-L AE5 P XPCWHT-L E5 P XPCWHT-L E5 P XPCWHT-L E5 Notes: Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 29). Cree XLamp XP-C LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. 5

6 Flux Characteristics - White (T J = 25 C) - Continued Chromaticity Minimum Luminous Flux 350 ma Order Codes Kit CCT Code Flux (lm) 80 CRI Typical P XPCWHT-L F6 F6 E6 F7 E7 F8 E K 3500 K 3250 K 3000 K 2850 K 2700 K P XPCWHT-L F6 P XPCWHT-L F6 P XPCWHT-L E6 P XPCWHT-L E6 P XPCWHT-L E6 P XPCWHT-L F7 P XPCWHT-L F7 N4 62 XPCWHT-L F7 P XPCWHT-L E7 P XPCWHT-L E7 N4 62 XPCWHT-L E7 P XPCWHT-L F8 N4 62 XPCWHT-L F8 N XPCWHT-L F8 P XPCWHT-L E8 N4 62 XPCWHT-L E8 N XPCWHT-L E8 Notes: Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 29). Cree XLamp XP-C LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. 6

7 Flux Characteristics - Color (T J = 25 C) The following tables provide order codes for XLamp XP-C color LEDs. For a complete description of the order code nomenclature, please see the Bin and Order Code Formats section (page 27). Color Royal Blue Minimum Radiant Calculated Minimum Dominant Wavelength (nm) 350 ma Radiant 125 ma* Minimum Maximum Order Codes Group Flux (mw) Flux (mw) Group DWL (nm) Group DWL (nm) D3 450 D5 465 XPCROY-L D3 450 D4 460 XPCROY-L D4 455 D5 465 XPCROY-L D3 450 D5 465 XPCROY-L D3 450 D4 460 XPCROY-L D4 455 D5 465 XPCROY-L D3 450 D5 465 XPCROY-L D3 450 D4 460 XPCROY-L Color Minimum Luminous Flux (@ 350 ma Calculated Minimum Luminous 125 ma* Dominant Wavelength (nm) Minimum Maximum Order Codes Group Flux (lm) Flux (lm) Group DWL (nm) Group DWL (nm) B3 465 B6 485 XPCBLU-L W01 Blue J K K B3 465 B5 480 XPCBLU-L W02 B4 470 B5 480 XPCBLU-L W05 B3 465 B6 485 XPCBLU-L Y01 B3 465 B5 480 XPCBLU-L Y02 B4 470 B5 480 XPCBLU-L Y05 B3 465 B6 485 XPCBLU-L Z01 B3 465 B5 480 XPCBLU-L Z02 B4 470 B5 480 XPCBLU-L Z05 Notes: Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 29). Cree XLamp XP-C LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values at 125 ma are calculated and for reference only. 7

8 Flux Characteristics - Color (T J = 25 C) - Continued Color Minimum Luminous Flux (@ 350 ma Calculated Minimum Luminous 125 ma* Dominant Wavelength (nm) Minimum Maximum Order Codes Group Flux (lm) Flux (lm) Group DWL (nm) Group DWL (nm) G2 520 G4 535 XPCGRN-L Green N N P P P G2 520 G3 530 XPCGRN-L G3 525 G4 535 XPCGRN-L G2 520 G4 535 XPCGRN-L G2 520 G3 530 XPCGRN-L G3 525 G4 535 XPCGRN-L G2 520 G4 535 XPCGRN-L G2 520 G3 530 XPCGRN-L G3 525 G4 535 XPCGRN-L G2 520 G4 535 XPCGRN-L G2 520 G3 530 XPCGRN-L G3 525 G4 535 XPCGRN-L G2 520 G4 535 XPCGRN-L G2 520 G3 530 XPCGRN-L G3 525 G4 535 XPCGRN-L Color Minimum Luminous Flux (@ 350 ma Calculated Minimum Luminous 125 ma* Dominant Wavelength (nm) Minimum Maximum Order Codes Group Flux (lm) Flux (lm) Group DWL (nm) Group DWL (nm) Amber M M N N N A2 585 A3 595 XPCAMB-L A3 590 A3 595 XPCAMB-L A2 585 A3 595 XPCAMB-L A3 590 A3 595 XPCAMB-L A2 585 A3 595 XPCAMB-L A3 590 A3 595 XPCAMB-L A2 585 A3 595 XPCAMB-L A3 590 A3 595 XPCAMB-L A2 585 A3 595 XPCAMB-L A3 590 A3 595 XPCAMB-L Notes: Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 29). Cree XLamp XP-C LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values at 125 ma are calculated and for reference only. 8

9 Flux Characteristics - Color (T J = 25 C) - Continued Color Minimum Luminous Flux (@ 350 ma Calculated Minimum Luminous 125 ma* Dominant Wavelength (nm) Minimum Maximum Order Codes Group Flux (lm) Flux (lm) Group DWL (nm) Group DWL (nm) O3 610 O4 620 XPCRDO-L N O3 610 O3 615 XPCRDO-L O4 615 O4 620 XPCRDO-L O3 610 O4 620 XPCRDO-L N O3 610 O3 615 XPCRDO-L Red-Orange O4 615 O4 620 XPCRDO-L O3 610 O4 620 XPCRDO-L N O3 610 O3 615 XPCRDO-L O4 615 O4 620 XPCRDO-L O3 610 O4 620 XPCRDO-L P O3 610 O3 615 XPCRDO-L O4 615 O4 620 XPCRDO-L Color Minimum Luminous Flux (@ 350 ma Calculated Minimum Luminous 125 ma* Dominant Wavelength (nm) Minimum Maximum Order Codes Group Flux (lm) Flux (lm) Group DWL (nm) Group DWL (nm) Red M M N N R2 620 R3 630 XPCRED-L R2 620 R2 625 XPCRED-L R2 620 R3 630 XPCRED-L R2 620 R2 625 XPCRED-L R2 620 R3 630 XPCRED-L R2 620 R2 625 XPCRED-L R2 620 R3 630 XPCRED-L R2 620 R2 625 XPCRED-L Notes: Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 29). Cree XLamp XP-C LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the order code. * Flux values at 125 ma are calculated and for reference only. 9

10 Relative Spectral Power Distribution White 100 Relative Radiant Power (%) K K CCT 3700 K K CCT 2600 K K CCT Wavelength (nm) Color Relative Radiant Power (%) Royal Blue Blue Green Amber Red-Orange Red Wavelength (nm) 10

11 Relative Flux vs. Junction Temperature (I F = 350 ma) 100% 90% Relative Luminous Flux 80% 70% 60% 50% 40% 30% 20% 10% 0% Junction Temperature (ºC) White Blue Green Relative Radiant Flux 100% 90% 80% 70% 60% 50% 40% 30% 20% 10% 0% Junction Temperature (ºC) Royal Blue Relative Luminous Flux 100% 90% 80% 70% 60% 50% 40% 30% 20% 10% 0% Junction Temperature ( C) Amber Red-Orange & Red 11

12 Electrical Characteristics (T J = 25 C) hermal 350 Design Forward Current (ma) White, Blue, Royal Blue Green Forward Voltage (V) 350 Forward Current (ma) Amber Red, Red- Orange Forward Voltage (V) 12

13 Relative Flux vs. Current (T J = 25 C) Relative Luminous Flux (%) White, Blue Green Forward Current (ma) Relative Radiant Flux (%) Royal Blue Forward Current (ma) 120 Relative Luminous Flux (%) Amber, Red- Orange, Red Forward Current (ma) 13

14 Typical Spatial Distribution 100 Relative Luminous Intensity (%) White Royal Blue, Blue, Green Amber, Red-Orange, Red Angle (º) 14

15 Thermal Design The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to ambient in order to optimize lamp life and optical characteristics. White, Royal Blue, Blue Maximum Current (ma) Rj-a = 15 C/W Rj-a = 20 C/W Rj-a = 25 C/W Rj-a = 30 C/W Ambient Temperature (ºC) Green Maximum Current (ma) Rj-a = 25 C/W Rj-a = 30 C/W Rj-a = 35 C/W Rj-a = 40 C/W Ambient Temperature (ºC) 15

16 Thermal Design - continued Amber Maximum Current (ma) Rj-a = 20 C/W Rj-a = 25 C/W Rj-a = 30 C/W Rj-a = 35 C/W Ambient Temperature (ºC) Red-Orange, Red Maximum Current (ma) Rj-a = 15 C/W Rj-a = 20 C/W Rj-a = 25 C/W Rj-a = 30 C/W Ambient Temperature (ºC) 16

17 Performance Groups - Luminous Flux XLamp XP-C LEDs (except royal blue) are tested for luminous flux and placed into one of the following luminous flux groups: Group Code Minimum Luminous Flux 350 ma Maximum Luminous Flux 350 ma J K K M M N N N P P P Q Q Q Q R Performance Groups - Radiant Flux (T J = 25 C) XLamp XP-C royal blue LEDs are tested for radiant flux and sorted into one of the following radiant flux bins: Group Minimum Radiant Flux 350 ma Maximum Radiant Flux 350 ma

18 Performance Groups - Chromaticity White XLamp XP-C LEDs are tested for chromaticity and placed into one of the regions defined by the bounding coordinates on the following pages. Region x y Region x y WK WA WM WB WE WN WC WF WP WD WG WJ WH

19 Performance Groups - Chromaticity (continued) Region x y Region x y Region x y Region x y A B 0C 0D R S 0T 0U A B 1C 1D R S 1T 1U A B 2C 2D R S 2T 2U A B 3C 3D R S A B 4C 4D A A2 5A3 5A

20 Performance Groups - Chromaticity (continued) Region x y Region x y Region x y Region x y B B2 5B3 5B C C2 5C3 5C D D2 5D3 5D A A2 6A3 6A B B2 6B3 6B C C2 6C3 6C D D2 6D3 6D A A2 7A3 7A B B2 7B3 7B C C2 7C3 7C

21 Performance Groups - Chromaticity (continued) Region x y Region x y Region x y Region x y D D2 7D3 7D A A2 8A3 8A B B2 8B3 8B C C2 8C3 8C D D2 8D3 8D

22 Performance Groups - Dominant Wavelength Color XLamp XP-C LEDs are tested for dominant wavelength (DWL) and sorted into one of the DWL bins defined below. Color Royal Blue Blue Green Amber Red-Orange Red DWL Group Minimum DWL 350 ma Maximum DWL 350 ma D D D B B B B G G G A A O O R R Performance Groups - Forward Voltage Amber, red-orange and, red XLamp XP-C LEDs are tested for forward voltage and sorted into one of the forward voltage bins defined below. Forward Voltage Group Minimum Forward Voltage 350 ma Maximum Forward Voltage 350 ma B C D E F G H J

23 Cree s Standard Chromaticity Regions Plotted on the 1931 CIE Curve Cool White K K K WH BBL 7000 K WG WJ WF CCy K WE WC WD WP 0.31 WB WN K WA WM 0.29 WK CCx ANSI Cool White K K CCy K 0S 0B 6500 K 1S 0T 1B 0C 1A 0D 1R 0A 0U 0R 1T 1C 1D 1U 2S 2B 2A 2R 2T 2C 2D 2U 3S 3B 3A 3R ANSI C78.377A CCx 23

24 Cree s Standard Chromaticity Regions Plotted on the 1931 CIE Curve - continued Neutral White 0.44 CCy S 3B 3A 3R 5000 K 3U 3D 3C 3T 4R 4A 4B 4S 4U 5R 3500 K 4000 K 6S 4500 K 5T 6C3 6C2 6B3 5S 6C4 5C3 6B2 6C1 5C2 6B4 4T 6D3 5B3 5C4 6B1 6D2 5B2 5C1 6A3 6D4 5B4 5D3 6A2 6D1 4C 5B1 5D2 6A4 5A3 5D4 6A1 5A2 5D1 6U 5A4 4D 5A1 6R 5U ANSI C78.377A 6T CCx ANSI Neutral White and ANSI Warm White K 2700 K CCy B 5000 K 3C 4A 4B 4D 4500 K 4C 5A1 5A2 5B1 5B2 5A4 5A3 5B4 5B3 5D1 5D2 5C K 5C2 5D4 5D3 5C4 6A1 5C3 6A2 6B1 6A4 6B2 6A3 6B4 6D1 6B3 6D2 6C1 6D K 6C2 6D3 6C4 7A1 6C3 7A2 7A4 7B1 7A3 7B2 7D1 7B4 7D2 7B3 7D4 7C1 7D3 8A1 7C2 7C4 8A2 8A4 7C3 8B1 8A3 8D1 8B2 8B4 8D2 8D4 8B3 8C1 8D3 ANSI C78.377A 8C2 8C4 8C3 3D 3A CCx 24

25 Cree s Standard Cool White Kits Plotted on ANSI Standard Chromaticity Regions K K K K 2S 2T 3S 3B K K 2S 2T 3S 3B CCy K 1S 0T 1B 0S 0C 1A 0B 0D 1R 0A 0U 0R 1T 1C 1D 1U 2B 2A 2R 2C 2D 2U 3A 3R ANSI C78.377A CCy K 1S 0T 1B 0S 0C 1A 0B 0D 1R 0A 0U 0R 1T 1C 1D 1U 2B 2A 2R 2C 2D 2U 3A 3R ANSI C78.377A CCx CCx K K K 50 2S 2T 3S 3B CCy 8000 K 0T 1S 1B 1T 1C 1D 2B 2A 2C 2D 2U 3A 3R S 0C 0B 0D 0A 0U 0R 1A 1R 1U 2R ANSI C78.377A CCx K K CCy K 6500 K E1 1S 0T 1B 0S 0C 1A 0B 0D 1R 0A 0U 0R 1T 1C 1D 1U 5700 K 2S 2B 2A 2R 2T 2C 2D 2U 3S 3B 3A 3R ANSI C78.377A CCy K 6500 K 1S 0T 1B 0S 0C 1A 0B 0D 1R 0A 0U 0R 1T 1C 1D 1U 2S 2B 2A 2R 5700 K E2 2T 2C 2D 2U 3S 3B 3A 3R ANSI C78.377A CCx CCx 25

26 Cree s Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity Regions K CCy E K 3C 3B E4 4A 4B E K E K 8C2 8B3 8B2 7C K 7C2 7B3 7B2 8B4 8C1 8C4 8B K E6 6C3 7C4 7C1 6C2 7B4 8D2 8D3 6B3 7B1 8A3 6C4 5C3 6B2 6C1 5C2 6B4 7A2 7A3 7D2 E5 7D3 8A2 6D3 7D4 8A1 8A4 8D1 8D4 5B3 5C4 6B1 7D1 6D2 7A4 5B2 5C1 6A3 7A1 6D4 5B4 5D3 6A2 6D1 5B1 5D2 4C 6A4 5A3 5D4 6A1 5A2 5D1 5A4 ANSI 4D 5A1 C78.377A 8C3 3D 3A CCx K CCy B 5000 K F4 4B 3C 4A 3000 K 3500 K 8C2 8B3 8B2 7C K 7C2 7B3 7B2 8B4 8C1 8C4 8B K 6C3 7C4 7C1 6C2 7B4 6B3 7B1 6C4 5C3 6B2 6C1 5C2 6B4 7A2 7A3 7D2 7D3 8A2 8A3 8D2 8D3 6D3 7D4 8A1 8A4 8D1 8D4 F5 5B3 5C4 6B1 7D1 6D2 7A4 5B2 5C1 6A3 7A1 6D4 5B4 5D3 6A2 6D1 5B1 5D2 4C 6A4 5A3 5D4 6A1 5A2 5D1 5A4 ANSI 4D 5A1 C78.377A F6 F7 F8 8C3 3D 3A CCx 26

27 Cree s Standard Chromaticity Kits The following table provides the chromaticity bins associated with chromaticity kits. Color CCT Kit Chromaticity Bins 6200 K 51 0A, 0B, 0C, 0D, 0R, 0S, 0T, 0U, 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 2U, 3A, 3B, 3R, 3S Cool White Neutral White Warm White 6000 K 53 1A, 1B, 1C, 1D, 1R, 1S, 1T, 1U, 2A, 2B, 2C, 2D, 2R, 2S, 2T, 3A, 3B, 3S 6200 K 50 1A, 1B, 1C, 1D, 2A, 2B, 2C, 2D 6500 K E1 1A, 1B, 1C, 1D 5700 K E2 2A, 2B, 2C, 2D 5000 K E3 3A, 3B, 3C, 3D 4750 K F4 3C, 3D, 4A, 4B 4500 K E4 4A, 4B, 4C, 4D 4250 K F5 4C, 4D, 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B K E5 5A1, 5A2, 5A3, 5A4, 5B1, 5B2, 5B3, 5B4, 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D K F6 5C1, 5C2, 5C3, 5C4, 5D1, 5D2, 5D3, 5D4, 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B K E6 6A1, 6A2, 6A3, 6A4, 6B1, 6B2, 6B3, 6B4, 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D K F7 6C1, 6C2, 6C3, 6C4, 6D1, 6D2, 6D3, 6D4, 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B K E7 7A1, 7A2, 7A3, 7A4, 7B1, 7B2, 7B3, 7B4, 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D K F8 7C1, 7C2, 7C3, 7C4, 7D1, 7D2, 7D3, 7D4, 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B K E8 8A1, 8A2, 8A3, 8A4, 8B1, 8B2, 8B3, 8B4, 8C1, 8C2, 8C3, 8C4, 8D1, 8D2, 8D3, 8D4 Bin and Order Code Formats XP-C bin codes and order codes are configured in the following manner: Order Code Series XPC = XP-C Color specification L1 = Standard CRI Bin Code Series XPC = XP-C Color specification L1 = Standard CRI SSSCCC-BD-HHHH-NNNNN Kit number Internal code Color WHT = White ROY = Royal Blue BLU = Blue GRN = Green AMB = Amber RDO = Red-Orange RED = Red SSSCCC-BD-WWW-FF-G-AA Luminous or radiant flux group Internal code Voltage performance group (amber, red-orange, red) Chromaticity bin or dominant-wavelength group Color WHT = White ROY = Royal Blue BLU = Blue GRN = Green AMB = Amber RDO = Red-Orange RED = Red 27

28 Reflow Soldering Characteristics In testing, Cree has found XLamp XP-C LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed below. As a general guideline, Cree recommends that users follow the recommended soldering profile provided by the manufacturer of the solder paste used, and therefore it is the lamp or luminaire manufacturer s responsibility to determine applicable soldering requirements. Note that this general guideline may not apply to all PCB designs and configurations of reflow soldering equipment. T P Ramp-up t P Critical Zone T L to T P Temperature T L Ts max Ts min ts Preheat t S Ramp-down 25 t 25 C to Peak Time IPC/JEDEC J-STD-020C Profile Feature Lead-Free Solder Average Ramp-Up Rate (Ts max to Tp) 1.2 C/second Preheat: Temperature Min (Ts min ) 120 C Preheat: Temperature Max (Ts max ) 170 C Preheat: Time (ts min to ts max ) seconds Time Maintained Above: Temperature (T L ) 217 C Time Maintained Above: Time (t L ) seconds Peak/Classification Temperature (Tp) C Time Within 5 C of Actual Peak Temperature (tp) Ramp-Down Rate Time 25 C to Peak Temperature seconds 1-6 C/second 4 minutes max. Note: All temperatures refer to topside of the package, measured on the package body surface. 28

29 Notes Measurements The luminous flux, radiant power, chromaticity, forward voltage and CRI measurements in this document are binning specifications only and solely represent product measurements as of the date of shipment. These measurements will change over time based on a number of factors that are not within Cree s control and are not intended or provided as operational specifications for the products. Calculated values are provided for informational purposes only and are not intended or provided as specifications. Pre Release Qualification Testing Please read the LED Reliability Overview for details of the qualification process Cree applies to ensure long-term reliability for XLamp LEDs and details of Cree s pre-release qualification testing for XLamp LEDs. Moisture Sensitivity Cree recommends keeping XLamp LEDs in the provided, resealable moisture-barrier packaging (MBP) until immediately prior to soldering. Unopened MBPs that contain XLamp LEDs do not need special storage for moisture sensitivity. Once the MBP is opened, XLamp XP-C LEDs may be stored as MSL 1 per JEDEC J-STD-033, meaning they have unlimited floor life in conditions of 30 ºC/85% relative humidity (RH). Regardless of the storage condition, Cree recommends sealing any unsoldered LEDs in the original MBP. RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/EC (RoHS2), as implemented January 2, RoHS Declarations for this product can be obtained from your Cree representative or from the Product Ecology section of the Cree website. REACh Compliance REACh substances of very high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future, please contact a Cree representative to insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available upon request. UL Recognized Component This product meets the requirements to be considered a UL Recognized Component with Level 4 enclosure consideration. The LED package or a portion thereof has been investigated as a fire and electrical enclosure per ANSI/UL Vision Advisory WARNING: Do not look at an exposed lamp in operation. Eye injury can result. For more information about LEDs and eye safety, please refer to the LED Eye Safety application note. 29

30 Notes - Continued Intellectual Property For remote phosphor applications, a separate license to certain Cree patents is required. 30

31 Mechanical Dimensions (T A = 25 C) Thermal vias, if present, are not shown on these drawings All measurements are ±.13 mm unless otherwise indicated Top View 2.60 Side View Anode 1.30 Bottom View Anode.50 Alternate Bottom View Recommended PCB Solder Pad Recommended Stencil Pattern (Hatched Area is Open) 31

32 Tape and Reel All Cree carrier tapes conform to EIA-481D, Automated Component Handling Systems Standard /-.00 Except as noted, all dimensions in mm / /.00 B 4.00 ± ±.10 CATHODE SIDE B 1.75 ± / Nominal Max ±.10 ANODE SIDE.30 ± ± ± / / / SECTION B-B /-.00 DRAWN BY DATE END START Trailer 160mm (min) of empty pockets sealed with tape (20 pockets min.) Loaded Pockets (1,000 Lamps) Leader 400mm (min) of empty pockets with at least 100mm sealed by tape (50 empty pockets min.) User Feed Direction Cover Tape Pocket Tape 7" 13mm 32

33 Packaging Unpackaged Reel Label with Cree Bin Code, Quantity, Reel ID Packaged Reel Label with Cree Order Code, Quantity, Reel ID, PO # Label with Cree Bin Code, Quantity, Reel ID Boxed Reel Label with Cree Order Code, Quantity, Reel ID, PO # Label with Cree Bin Code, Quantity, Reel ID Patent Label (on bottom of box) 33