TEST REPORT EN Luminaires Part 2: Particular requirements Section one Fixed general purpose luminaires

Transcription

1 SHEZHE LCS COMLIACE TESTIG LABORATORY LTD. REORT O.: LCS TS TEST REORT E Luminaires art 2: articular requirements Section one Fixed general purpose luminaires Report reference o.... : LCS TS Tested by(name + signature)... : Snow Yi... Approved by(name +signature)... : Alex Hu... Date of issue... : January 07, 2012 Contents... : 54 pages Testing laboratory ame...: Shenzhen LCS Compliance Testing Laboratory Ltd Address...: Xingyuan Industrial ark, Tongda Road, Bao an Blvd, Bao an District, Shenzhen, Guangdong, China Testing location... : As above Client ame... : Kapata Lighting Co., Limited Address... : 3rd Floor, G Building, Wanda Industrial ark, Shiyan, Bao an, Shenzhen, R China Manufacturer ame... : Kapata Lighting Co., Limited Address... : 3rd Floor, G Building, Wanda Industrial ark, Shiyan, Bao an, Shenzhen, R China Test specification Standard... : E : 1989 (see also E : 2008+A11: 2009) Test procedure... : Compliance with E : 1989 (see also E : 2008+A11: 2009) on-standard test method... :.A. Test item Description... : High Bay LED Light Trademark... : KAATA Model and/or type reference... : KT-HBL1*30WA4, KT-HBL1*40WA4, KT-HBL1*50WA4, KT-HBL1*60WA4, KT-HBL1*70WA4, KT-HBL1*80WA4, KT-HBL1*100WA4, KT-HBL1*120WA4, KT-HBL1*150WA4, KT-HBL1*200WA4 Rating(s)... : AC85-265V, 50-60Hz, 200W age 1 of 54

2 SHEZHE LCS COMLIACE TESTIG LABORATORY LTD. REORT O.: LCS TS Test item particulars Classification of installation and use.: Class I Supply Connection.. : ower cords Test case verdicts Test case does not apply to the test object : (/A) Test item does meet the requirement...: (ass) Test item does not meet the requirement...: F(Fail) Testing Date of receipt of test item...: ovember 28, 2011 Date(s) of performance of test...: ovember 28, 2011 January 07, 2012 General remarks This report shall not be reproduced except in full without the written approval of the testing laboratory. The test results presented in this report relate only to the item tested. Clause numbers between brackets refer to clauses in E (IEC ). "(see remark #)" refers to a remark appended to the report. "(see Annex #)" refers to an annex appended to the report. Throughout this report a comma is used as the decimal separator. General product information; (1), The laboratory ambient for testing: , 60% -73%R.H. (2). The all models are similar except their power, appearance and LED lamp number. And all tests are base on KT-HBL1*200WA4 (3). Attachment o. 1: Report of E Attachment o. 2: Report of E age 2 of 54

3 SHEZHE LCS COMLIACE TESTIG LABORATORY LTD. REORT O.: LCS TS Copy of marking plate High Bay LED Light Model: KT-HBL1*200WA4 AC85-265V, 50-60Hz, 200W Kapata Lighting Co., Limited Made In China Remark: The above is representative label. Label of testing Rubbing for 15 s with a piece of cloth soaked with water. And a further 15 s with a piece of cloth soaked with petroleum. age 3 of 54

4 SHEZHE LCS COMLIACE TESTIG LABORATORY LTD. REORT O.: LCS TS E (0) General test requirements 1.2 (0.1) Information for luminaires design considered Yes [ ] o [ ] 1.2 (0.3) More sections applicable AC85-265V 1.4 (2) CLASSIFICATIO 1.4 (2.2) Type of protection...: Class I 1.4 (2.3) Degree of protection...: IX0 1.4 (2.4) Luminaire suitable for direct mounting on normally flammable surfaces...: Luminaire not suitable for direct mounting on normally flammable surfaces..: Fixed luminaries o 1.4 (2.5) Luminaire for normal use...: Yes Luminaire for rough service...: o 1.5 (3) MARKIG 1.5 (3.2) Markings on luminaires See marking label osition of the marking Under the product Format of symbols/text The height of symbols more than 5mm, text more than 2mm 1.5 (3.3) Additional information Language of instructions In English only 1.5 (3.3.1) Combination luminaires ot combination luminaire 1.5 (3.3.2) ominal frequency in Hz 50-60Hz 1.5 (3.3.3) Operating temperature Operating temperature is (3.3.4) Symbol or warning notice 1.5 (3.3.5) Wiring diagram 1.5 (3.3.6) Special conditions o such special conditions 1.5 (3.3.7) Metal halid lamp luminaire warning 1.5 (3.3.8) Limitation for semi-luminaires 1.5 (3.3.9) ower factor and supply current ower factor: 0.971, supply current: 0.992A 1.5 (3.3.10) Suitability for use indoors Use indoor only 1.5 (3.3.11) Luminaires with remote control ot such construction 1.5 (3.3.12) Clip-mounted luminaire - warning 1.5 (3.3.13) Specifications of protective shields o such parts age 4 of 54

5 SHEZHE LCS COMLIACE TESTIG LABORATORY LTD. REORT O.: LCS TS E (3.3.14) Symbol for nature of supply ~ 1.5 (3.3.15) Rated current of socket outlet o socket outlet 1.5 (3.3.16) Rough service luminaire ormal service luminaire 1.5 (3.3.17) Mounting instruction for type Y, Type Z and some type X attachments type Y 1.5 (3.3.18) on-ordinary luminaires with VC cable Ordinary luminaires 1.5 (3.3.19) rotective conductor current in instruction if applicable 1.5 (3.3.20) rovided with information if not intended to be mounted within arms reach 1.5 (3.4) Test with water 15s Test with hexane 15s Legible after test Still legible Label attached Still attached 1.6 (4) COSTRUCTIO 1.6 (4.2) Components replaceable without difficulty All parts can't be placed. 1.6 (4.3) Wireways smooth and free from sharp edges 1.6 (4.4) Lampholders 1.6 (4.4.1) Integral lampholder 1.6 (4.4.2) Wiring connection 1.6 (4.4.3) Lampholder for end-to-end mounting 1.6 (4.4.4) ositioning - pressure test ()..: After test the lampholder comply with relevant standard sheets and show no damage After test on singal-capped lampholder the lampholder have not moved form its position and show no permanent deformation - bending test () : After test the lamholder have not moved from its position and show no permanent deformation 1.6 (4.4.5) eak pulse voltage o ignitors 1.6 (4.4.6) Centre contact o ignitors age 5 of 54

6 SHEZHE LCS COMLIACE TESTIG LABORATORY LTD. REORT O.: LCS TS E (4.4.7) arts in rough service luminaires resistant to tracking ot for rough service 1.6 (4.4.8) Lamp connectors o lamp connector 1.6 (4.4.9) Caps and bases correctly used 1.6 (4.5) Starter holders o starter holders Starter holder in luminaries other than Class II Starter holder Class II construction 1.6 (4.6) Terminal blocks o such part Tails Unsecured blocks 1.6 (4.7) Terminals and supply connections 1.6 (4.7.1) Contact to metal parts 1.6 (4.7.2) Location stranded wires 8 mm test live conductor 8 mm test earth conductor 1.6 (4.7.3) Terminals for supply conductors 1.6 ( ) Welded connections - stranded or solider conductor - spot welding - welding between wires - type Z attachment - mechanical test according to electrical test according to hest test according to and (4.7.4) Terminals other than supply connection 1.6 (4.7.5) Heat-resistant wiring/sleeves 1.6 (4.7.6) Multi-pole plug o plug - test at (4.8) Switches: o switches - adequate rating - adequate fixing - polarized supply - Compliance with for electronic switches 1.6 (4.9) Insulating lining and sleeves Used plastic sleeves. age 6 of 54

7 SHEZHE LCS COMLIACE TESTIG LABORATORY LTD. REORT O.: LCS TS E (4.9.1) Retainment Insulation paper used to enclose the ballast Method of fixing: lastic 1.6 (4.9.2) Insulated linings and sleeves Resistant to temperature >20 to the wire temperature or a) & c) Insulation resistance and electric strength Comply with requirements approved by UL b) Ageing test. Temperature ( )...: 1.6 (4.10) Insulation of Class II luminaires Class I 1.6 (4.10.1) o contact, mounting surface - accessible metal parts - wiring of basic insulation Safe installation fixed luminaires Capacitors and switches o such parts Interference suppression capacitors according to IEC (4.10.2) Assembly gaps: Comply with requirements - not coincidental o such gaps - no straight access with test probe 1.6 (4.10.3) Retainment of insulation: - fixed - unable to be replaced; luminaire inoperative - sleeves retained in position - lining in lampholder 1.6 (4.11) Electrical connections Supply cords 1.6 (4.11.1) Contact pressure o pressure transmitted to the insulating material 1.6 (4.11.2) Screws: - Self-tapping screws - thread-cutting screws 1.6 (4.11.3) Screw locking: - spring washer o spring washer - rivets o rivet provided 1.6 (4.11.4) Material of current-carrying parts > 50% copper 1.6 (4.11.5) o contact to wood or mounting surface o wood 1.6 (4.11.6) Electro-mechanical contact systems o such construction 1.6 (4.12) Mechanical connections and glands age 7 of 54

8 SHEZHE LCS COMLIACE TESTIG LABORATORY LTD. REORT O.: LCS TS E (4.12.1) Screw not made of soft metal Screws of insulating material Torque test: torque (m); part...: 1.2m Torque test: torque (m); part...: Torque test: torque (m); part...: 1.6 (4.12.2) Screw with diameter < 3 mm screw into metal 1.6 (4.12.4) Locked connections: - fixed arms; torque (m)...: - lampholder; torque (m)...: - push-button switches; torque (m)...: o such switches 1.6 (4.12.5) Screwed glands; force ()...: 1.6 (4.13) Mechanical strength 1.6 (4.13.1) Impact tests: - fragile parts; energy (m)...: 0.2 m for fragile parts - other parts; energy (m)...: 0.35m for enclosure 1) live parts Inaccessible 2) linings o linings provided 3) protection 4) covers o such covers 1.6 (4.13.2) Metal parts enclosing live parts shall have adequate mechanical strength o such parts 1.6 (4.13.3) Straight test finger (4.13.4) Rough service luminaires ormal service luminaires I 54 or higher a) fixed b) hand-held c) delivered with a stand d) for temporary installations and suitable for mounting on a stand 1.6 (4.13.6) Tumbling barrel 1.6 (4.14) Suspensions and adjusting devices 1.6 (4.14.1) Mechanical load: A) four times the weight B) torque 2,5 m C) bracket arm; force ()...: D) load track-mounted luminaires age 8 of 54

9 SHEZHE LCS COMLIACE TESTIG LABORATORY LTD. REORT O.: LCS TS E E) clip-mounted luminaires, glass-shelve; thickness (mm)...: metal rod; diameter (mm)...: 1.6 (4.14.2) Load to flexible cables: mass (kg)...: stress in conductors (/mm²)...: Mass (kg) of semi-luminaires...: Bending moment (m) of semi-luminaires : 1.6 (4.14.3) Adjusting devices: - flexing test; number of cycles...: - strands broken - electric strength test afterwards 1.6 (4.14.4) Telescopic tubes: cords not fixed to tube; no strain on conductors 1.6 (4.14.5) Guide pulleys o such construction 1.6 (4.14.6) Strain on socket-outlets ot such unit 1.6 (4.15) Flammable materials: Metal enclosure - glow-wire test spacing 30 mm - screen withstanding test of screen dimensions - no fiercely burning material - thermal protection - electronic circuits exempted 1.6 (4.15.2) Luminaires made of thermoplastic material a) construction b) temperature sensing control c) surface temperature 1.6 (4.16) Luminaires for mounting on normally flammable surfaces o lamp control gear See section (4.16.1) Lamp control gear shall spacing: - spacing 10 mm - spacing 35 mm 1.6 (4.16.2) Thermal protection: o such component - in lamp control gear - external age 9 of 54

10 SHEZHE LCS COMLIACE TESTIG LABORATORY LTD. REORT O.: LCS TS E fixed position - temperature marked lamp control gear 1.6 (4.16.3) Design to satisfy the test of (4.17) Drain holes o drain holes Clearance at least 5 mm 1.6 (4.18) Resistance to corrosion: 1.6 (4.18.1) - rust-resistance ainted with rust-resistance material 1.6 (4.18.2) - season cracking in copper 1.6 (4.18.3) - corrosion of aluminium o aluminium used 1.6 (4.19) Ignitors compatible with ballast o ignitors used 1.6 (4.20) Rough service vibration...: ot such appliance 1.6 (4.21) rotective shield 1.6 (4.21.1) Shield fitted Shield of glass if tungsten halogen lamps 1.6 (4.21.2) articles from a shattering lamp not impair safety 1.6 (4.21.3) o direct path 1.6 (4.21.4) Impact test on shield Glow-wire test on lamp compartment 1.6 (4.22) Attachments to lamps o such attachments 1.6 (4.23) Semi-luminaires comply with Class II ot such appliance 1.6 (4.24) UV radiation for tungsten halogen lamps and metal halide lamps (Annex ) o such appliance 1.6 (4.25) o sharp point edges o sharp points or edges 1.6 (4.26) Short-circuit protection o SELV parts 1.6 (4.26.1) Uninsulated accessible SELV parts 1.6 (4.26.2) Short circuit test 1.6 (4.26.3) Test chain according to figure (11) CREEAGE DISTACES AD CLEARACES Working voltage (V)...: AC85-265V Voltage form Sinusoidal [ ] on-sinusoidal [ ] TI < 600 [ ] > 600 [ ] Impusle withstand category (normal category II) (category III annex U) Category II age 10 of 54

11 SHEZHE LCS COMLIACE TESTIG LABORATORY LTD. REORT O.: LCS TS E Rated pulse voltage (kv)...: <2.0kV (1) Current-carrying parts of different polarity: cr (mm); cl (mm)...: (2) Current-carrying parts and accessible parts:cr (mm); cl (mm)...: (3) arts becoming live due to breakdown of basic insulation and metal parts: cr (mm); cl (mm)...: (4) Outer surface of cable where it is clamp and metal parts: cr (mm); cl (mm)...: (5)not used (6) Current-carrying parts and supporting surface: cr (mm); cl (mm)...: cl>5.0mm, limit: 1.5mm cr>5.2mm, limit: 2.5mm cl>5.0mm, limit: 1.5mm cr>5.2mm, limit: 2.5mm cl>5.0mm, limit: 1.5mm cr>5.2mm, limit: 2.5mm 1.8 (7) ROVISIO FOR EARTHIG Class I appliances 1.8 ( ) Accessible Metal parts Metal parts in contact with supporting surface Resistance < 0.5 Ω 0.26Ω Self-tapping screws used Thread-forming screws Thread-forming screws used in a grove Earth marks contact first 1.8 ( ) Earth continuity in joints etc. 1.8 (7.2.4) Locking of clamping means Compliance with Terminal blocks with integrated screwless earthing contacts tested according Annex V 1.8 (7.2.5) Earth terminal integral part of Connector socket 1.8 (7.2.6) Earth terminal adjacent to mains terminals 1.8 (7.2.7) Electrolytic Corrosion of the earth terminal 1.8 (7.2.8) Material of earth terminal Contact surface bare metal 1.8 (7.2.10) Class II luminaire for looping-in age 11 of 54

12 SHEZHE LCS COMLIACE TESTIG LABORATORY LTD. REORT O.: LCS TS E Double or reinforced insulation to functional earth 1.8 (7.2.11) Earthing core coloured green-yellow Length of earth conductor 1.9 (14) SCREW TERMIALS Separately approved: component list See annex 1 art of the luminaire See annex (15) SCREWLESS TERMIALS and electrical connections Separately approved: component list See annex 1 art of the luminaire See annex (5) EXTERAL AD ITERAL WIRIG 1.10 (5.2) Supply connection and external wiring 1.10 (5.2.1) Means of connection...: ower cords 1.10 (5.2.2) Type of cable...: H05VVH2-F ominal cross-section area (mm 2 ) 1.0mm 2 Cables equal to IEC and IEC IEC (5.2.3) Type of attachment, X,Y or Z Type Y 1.10 (5.2.5) Type Z not connected to screws 1.10 (5.2.6) Cable entries - suitable for introduction - adequate degree of protection 1.10 (5.2.7) Cable entries through rigid material have rounded edges 1.10 (5.2.8) Insulating bushings: o such part - suitably fixed - material in bushings - material not likely to deteriorate - tubes or guard made of insulating material o such component 1.10 (5.2.9) Locking of screw bushings o such component 1.10 (5.2.10) Cord anchorage: age 12 of 54

13 SHEZHE LCS COMLIACE TESTIG LABORATORY LTD. REORT O.: LCS TS E covering protected from abrasion - clear how to be effective - no mechanical or thermal stress - no tying of cables into knots etc. - insulating material or lining 1.10 ( ) Cord anchorage for type X attachment cord ot such construction a) at least one part fixed b) types of cable c) no damaging of the cable d) whole cable can be mounted e) no touching of clamping screws f) metal screw not directly on cable g) replacement without special tool Glands not used as anchorage Labyrinth type anchorage 1.10 ( ) Adequate cord anchorages for type Y and type Z attachments Type Y 1.10 ( ) Tests: - impossible to push cable; unsafe - pull test: 25 times; pull () 60 - torque test: torque (m) 0.25m - displacement 2 mm 0.8mm - no movement of conductors - no damage of cable or cord 1.10 (5.2.11) External wiring passing into luminaire 1.10 (5.2.12) Looping-in terminals ot looping-in appliance 1.10 (5.2.13) Wire ends not tinned Wire ends tinned: no cold flow 1.10 (5.2.14) Mains plug same protection o plug Class III luminaire plug 1.10 (5.2.16) Appliance inlets (IEC 60320) o appliance inlet Appliance couplers of class II type 1.10 (5.2.17) o standardized in interconnecting cables assembled o such parts age 13 of 54

14 SHEZHE LCS COMLIACE TESTIG LABORATORY LTD. REORT O.: LCS TS E (5.2.18) Used plug in accordance with o plug - IEC other standard 1.10 (5.3) Internal wiring 1.10 (5.3.1) Internal wiring of suitable size and type 1007 Through wiring - not delivered/ mounting instruction - factory assembled - socket outlet loaded (A)...: - temperatures...: Green-yellow for earth only 1.10 ( ) Internal wiring connected directly to fixed wiring Cross-Sectional area (mm 2 ) >0.4 mm 2 Insulation thickness >0.5mm Extra insulation added where necessary 1.10 ( ) Internal wiring connected to fixed wiring via internal current-limited device Adequate cross-section area and insulation thickness 1.10 ( ) Double or reinforced insulation for class II 1.10 ( ) Conductors without insulation 1.10 ( ) SELV current-carrying parts o such parts 1.10 ( ) Insulation thickness other than VC or rubber 1.10 (5.3.2) Sharp edges etc. o moving parts of switches etc. Joints, raising/lowering devices Telescopic tubes etc. o twisting over (5.3.3) Insulating bushings - suitable fixed - material in bushings - material not likely to deteriorate - cables with protective sheath age 14 of 54

15 SHEZHE LCS COMLIACE TESTIG LABORATORY LTD. REORT O.: LCS TS E (5.3.4) Joints and Junctions effectively insulated 1.10 (5.3.5) Strain on internal wiring 1.10 (5.3.6) Wire carriers 1.10 (5.3.7) Wire ends not tinned Wire ends tinned: no cold flow 1.11 (8) ROTECTIO AGAIST ELECTRIC SHOCK 1.11 (8.2.1) Live parts not accessible with standard test finger Basic insulated parts not used on the outer surface without appropriate protection Basic insulated parts not accessible with standard test finger on portable and adjustable luminaires Basic insulated parts not accessible with ø50mm probe from outside, within arms reach, on wall-mounted luminaires Lamp and startholders in portable and adjustable luminaires comply with double or reinforced insulation requirements Basic insulation only accessible under lamp or starter replacement Double-ended tungsten filament lamp Insulation lacquer not reliable Double-ended high pressure discharge lamp Relevant warming according to fitted to the luminaire 1.11 (8.2.2) ortable luminaire adjusted in most unfavourable position Live parts enclosed by plastic enclosure and metal enclosure Fixed luminaire 1.11 (8.2.3 a) Class II luminaire: - basic insulated metal parts not accessible during starter or lamp replacement - basic insulated not accessible other than during starter or lamp replacement - glass protective shields not used as supplementary insulation 1.11 (8.2.3b) BC lampholder of metal in class I luminaires shall be earthed age 15 of 54

16 SHEZHE LCS COMLIACE TESTIG LABORATORY LTD. REORT O.: LCS TS E (8.2.3c) Class III luminaires with expose SELV parts: Ordinary luminaire : Class II luminaires - touch current - no-load voltage - other than ordinary luminaire: - nominal voltage 1.11 (8.2.4) ortable luminaire: Fixed luminaire - protection independent of supporting surface - terminal block completely covered 1.11 (8.2.5) Compliance with the standard test finger or relevant probe 1.11 (8.2.6) Covers reliably secured 1.11 (8.2.7) Discharging of capacitors >0,5 μf ortable plug connected luminaire with capacitor Discharge device on or within capacitor Discharge device mounted separately (-) rotective parts for lamp caps not removable by hand in hand-held inspection luminaires (-) Fixing of parts within 2 m from floor 1.12 (12) EDURACE TEST AD THERMAL TEST 1.12 (12.3) Endurance test: - mounting-position...: Wall - test temperature ( C)...: 35ºC - total duration (h)...: 240hrs. Totally 10 cycles, each 24h. Appliance worked as normal - supply voltage: Un factor; calculated voltage (V)...: 265VX1.1 - lamp used...: LED lamp 1.12 (12.3.2) After endurance test: - no part unserviceable - luminaire not unsafe - no damage to track system age 16 of 54

17 SHEZHE LCS COMLIACE TESTIG LABORATORY LTD. REORT O.: LCS TS E marking legible - no cracks, deformation etc (12.4) Thermal test (normal operation) (see table 12.4 ) 1.12 (12.5) Thermal test (abnormal operation) Short-circuit of starter contacts Lamps removed and not replaced 1.12 (12.6) Thermal test (failed lamp control gear condition): 1.12 (12.6.1) Through wiring or looping-in wiring loaded by a current of (A) - case of abnormal conditions...: - electronic ballast - measured winding temperature ( C): at 1,1 Un - measured mounting surface temperature ( C): at 1,1 Un...: - calculated mounting surface temperature( C) - track-mounted luminaires 1.12 (12.6.2) Temperature sensing control: - manual reset cut-out - auto reset cut-out - track-mounted luminaires 1.12 (12.7) Thermal test (failed ballast or transformer in plastic luminaires): 1.12 (12.7.1) Luminaire without temperature sensing control 1.12 ( ) Luminaire with fluorescent lamp 70W Test method or Annex V Test according to : - case of abnormal conditions - Ballast failure at supply voltage (V) - Components retained in place after the test - Test with standard test finger after the test Test according to Annex V: - case of abnormal conditions age 17 of 54

18 SHEZHE LCS COMLIACE TESTIG LABORATORY LTD. REORT O.: LCS TS E measured winding temperature ( ): at 1,1 Un.. : - measured temperature of fixing point/exposed part ( ): at 1,1Un... : - calculated temperature of fixing point/exposed part ( )...: Ball-pressure test: - part tested; temperature ( )... : - part tested; temperature ( )... : 1.12 ( ) Luminaire with discharge lamp, fluorescent lamp > 70W, transformer > 10 VA - case of abnormal conditions - measured winding temperature ( ): at 1,1 Un.. : - measured temperature of fixing point/exposed part ( ): at 1,1 Un... : - calculated temperature of fixing point/exposed part ( )... : Ball-pressure test: - part tested; temperature ( )... : - part tested; temperature ( )... : 1.12 ( ) Luminaire with short circuit proof transformers 10 VA - case of abnormal conditions - Components retained in place after the test - Test with standard test finger after the test 1.12 (12.7.2) Luminaire with temperature sensing control - thermal link - manual reset cut-out - auto reset cut-out - case of abnormal conditions - highest measured temperature of fixing point/exposed part ( ):... : Ball-pressure test: - part tested; temperature ( )... : - part tested; temperature ( )... : age 18 of 54

19 SHEZHE LCS COMLIACE TESTIG LABORATORY LTD. REORT O.: LCS TS E (9) RESISTACE TO DUST, SOLID OBJECTS AD MOISTURE 1.12 (9.2) Tests for ingress of dust, solid objects and moisture: - classification according to I...: IX0 - mounting position during test...: - fixing screws tightened; torque (m)...: - tests according to clauses...: - electric strength a) no deposit in dust-proof luminaire b) no talcum in dust-tight luminaire c) no trace of water on current-carrying parts or SELV parts or where it could become a hazard d) i) For luminaires without drain holes no water entry d) ii) For luminaires with drain holes no hazardous water entry e) no water in watertight luminaire f ) no contact with live parts (I 2X) f) no entry into enclosure (I 3X and I 4X) f) no contact with live parts (I3X and I4X) g) no trace of water on part of lamp requiring protection from splashing water h) no damage of protective shield or glass envelope 1.13 (9.3) Humidity test 48h Relative humidity 93%, temperature 25, 48h, followed by hi-pot test (-) arts removed before humidity treatment (10) ISULATIO RESISTACE AD ELECTRIC STREGTH 1.14 (10.2.1) Insulation resistance test: Cable or cord covered by metal foil or replaced by a metal rod of mm Ø... : Insulation resistance: Class I SELV: -- - between current-carrying parts of different polarity... : - between current-carrying parts and o switches age 19 of 54

20 SHEZHE LCS COMLIACE TESTIG LABORATORY LTD. REORT O.: LCS TS E mounting surface... : - between current-carrying parts and metal parts of the luminaire... : Other than SELV: -- - between live parts of different polarity... : >100 MΩ, limits: 2 MΩ - between live parts and mounting surface : - between live parts and metal parts... : >100 MΩ, limits: 2 MΩ - between live parts of different polarity through action of a switch... : 1.14 (10.2.2) Electric strength test: Dummy lamp Luminaires with ignitors after 24 h test Luminaires with manual ignitors Test voltage (V): SELV: -- - between current-carrying parts of different polarity... : - between current-carrying parts and mounting surface... : - between current-carrying parts and metal parts of the luminaire... : Other than SELV: -- - between live parts of different polarity... : 1530Vac, 1min, no breakdown - between live parts and mounting surface : - between live parts and metal parts... : 1530Vac, 1min, no breakdown 1.14 (10.3) Touch current (ma)...: 0.15mA, limits: 3.5mA 1.15 (13) RESISTACE TO HEAT, FIRE AD TRACKIG 1.15 (13.2.1) Ball-pressure test: - part tested; temperature ( C)...: - part tested; temperature ( C)...: 1.15 (13.3.1) eedle flame test (10 s): - part tested...: - part tested...: 1.15 (13.3.2) Glow-wire test (650 C): - part tested...: age 20 of 54

21 SHEZHE LCS COMLIACE TESTIG LABORATORY LTD. REORT O.: LCS TS E part tested...: 1.15 (13.4.2) Tracking test: part tested...: o burning 1.5 (3) MARKIG CEELEC COMMO MODIFICATIOS (E) ( ) Adequate warning on the package 1.10 (5) EXTERAL AD ITERAL WIRIG 1.10 (5.2.1) Connecting leads - without a means for connection to the supply - terminal block specified - relevant information provided - compliance with 4.6, 4.7.1, 4.7.2, , 11.2,12 and 13.2 of art (5.2.2) Cables equal to HD21 S2 or HD22 S2 ZB AEX ZB, SECIAL ATIOAL CODITIOS (E) (3.3) DK: power supply cord with label IT: warning label on Class 0 luminaire (4.5.1) DK: socket-outlets (5.2.1) CY, DK, FI, SE, GB: type of plug -- ZC AEX ZC, ATIOAL DEVIATIOS (E) (4&5) FR: Shuttered socket-outlets 10/16A (13.3) GB: Requirements according to United Kingdom Building Regulation (13.3.2) FR: Glow-wire test 850 alt. 750 for luminaires in premises open to public or 960 for luminaires in emergency exits age 21 of 54

22 SHEZHE LCS COMLIACE TESTIG LABORATORY LTD. REORT O.: LCS TS Tables AEX 1: components object/part o. Code manufacturer/trade mark type/model technical data standard mark(s) of conformity ower cords C Optional Optional 300V, 3x1.0mm 2 -- VDE Internal wiring B Shanghai Yingqian Electrical Wire & Cable Co., Ltd AWG, 80, 300V LED driver B MEA WELL HLG A Input: V, 50/60Hz, 2.1A Output: 48Vdc, 3.9A -- UL IEC The codes above have the following meaning: A - The component is replaceable with another one, also certified, with equivalent characteristics B - The component is replaceable if authorised by the test house C - Integrated component tested together with the appliance D - Alternative component CE age 22 of 54

23 SHEZHE LCS COMLIACE TESTIG LABORATORY LTD. REORT O.: LCS TS Tables Temperature( ) of part AEX 2: temperature measurements, thermal tests of Section 12 Type reference...: KT-HBL1*200WA4 Lamp used....: LED lamp Lamp control gear used...: Built-in model name: HLG A Mounting position of luminaire..: See product manual Supply wattage (W)..: 200W Supply current (A)...: 1.0A Calculated power factor..: Table: measured temperatures corrected for ta = 25 : - abnormal operating mode....:.a. - test 1: rated voltage.....: 265V - test 2: 1,06 times rated voltage or 1,05 times Rated wattage... : 265x1.06V - test 3: Load on wiring to socket-outlet, 1.06 times voltage or 1.05 times wattage...: -- - test 4: 1,1 times rated voltage or 1,05 times rated wattage...: Through wiring or looping-in wiring loaded by acurrent of A during the test...: -- Clause normal Clause abnormal Test 1 Test 2 Test 3 Limits( ) Test 4 Limit ( ) Internal wire LED driver enclosure Metal Enclosure, outside Mounting surface Ambient AEX 3: screw terminals (part of the luminaire) -- (14) SCREW TERMIALS -- (14.2) Type of terminal... : Rated current (A)... : ( ) One or more conductors ( ) Special preparation ( ) Terminal size Cross-sectional area (mm²)... : (14.3.3) Conductor space (mm)... : (14.4) Mechanical tests age 23 of 54

24 SHEZHE LCS COMLIACE TESTIG LABORATORY LTD. REORT O.: LCS TS Tables (14.4.1) Minimum distance (14.4.2) Cannot slip out (14.4.3) Special preparation (14.4.4) ominal diameter of thread (metric ISO thread)... : External wiring o soft metal (14.4.5) Corrosion (14.4.6) ominal diameter of thread (mm)... : Torque (m)... : (14.4.7) Between metal surfaces Lug terminal Mantle terminal ull test; pull ()... : (14.4.8) Without undue damage AEX 4: screwless terminals (part of the luminaire) -- (15) SCREWLESS TERMIALS -- (15.2) Type of terminal... : Rated current (A)... : (15.3.1) Material (15.3.2) Clamping (15.3.3) Stop (15.3.4) Unprepared conductors (15.3.5) ressure on insulating material (15.3.6) Clear connection method (15.3.7) Clamping independently (15.3.8) Fixed in position ( ) Conductor size Type of conductor (15.5.1) Terminals internal wiring ( ) ull test spring-type terminals (4, 4 samples) ( ) ull test pin or tab terminals (4, 4 samples) Insertion force not exceeding 50 (15.5.2) ermanent connections: pull-off test (20 ) (15.6) Electrical tests -- age 24 of 54

25 SHEZHE LCS COMLIACE TESTIG LABORATORY LTD. REORT O.: LCS TS Tables Voltage drop (mv) after 1 h (4 samples)... : Voltage drop of two inseparable joints umber of cycles... : Voltage drop (mv) after 10th alt. 25th cycle (4 samples)... : Voltage drop (mv) after 50th alt. 100th cycle (4 samples)... : After ageing, voltage drop (mv) after 10th alt. 25th cycle (4 samples)... : After ageing, voltage drop (mv) after 50th alt. 100th cycle (4 samples)... : (15.7) Terminals external wiring Terminal size and rating (15.8.1) ull test spring-type terminals (4 samples); pull () ull test pin or tab terminals (4 samples); pull () (15.9) Contact resistance test Voltage drop (mv) after 1 h terminal voltage drop (mv) Voltage drop of two inseparable joints Voltage drop after 10th alt. 25th cycle Max. allowed voltage drop (mv)... : terminal voltage drop (mv) Voltage drop after 50th alt. 100th cycle Max. allowed voltage drop (mv)... : terminal voltage drop (mv) Continued ageing: voltage drop after 10th alt. 25th cycle Max. allowed voltage drop (mv)... : terminal voltage drop (mv) Continued ageing: voltage drop after 50th alt. 100th cycle Max. allowed voltage drop (mv)... : terminal voltage drop (mv) age 25 of 54

26 SHEZHE LCS COMLIACE TESTIG LABORATORY LTD. REORT O.: LCS TS ictures Fig.1 Overview Fig. 2 Overview age 26 of 54

27 SHEZHE LCS COMLIACE TESTIG LABORATORY LTD. REORT O.: LCS TS ictures Fig. 3 LED Module view Fig. 4 Inside view age 27 of 54

28 SHEZHE LCS COMLIACE TESTIG LABORATORY LTD. REORT O.: LCS TS ictures Fig. 5 LED driver view age 28 of 54

29 SHEZHE LCS COMLIACE TESTIG LABORATORY LTD. REORT O.: LCS TS Attachment o.1 TEST REORT E hotobiological safety of lamps and lamp systems Report reference o....: See report E Tested by(name + signature)...: See report E Approved by(name +signature)...: See report E Date of issue...: See report E Contents...: See report E Testing laboratory ame... : See report E Address... : See report E Testing location...: See report E Client ame...: See report E Address...: See report E Manufacturer ame...: See report E Address...: See report E Test specification Standard...: E 62471: 2008 Test procedure...: Compliance with E 62471: 2008 on-standard test method...:.a. Test item Description...: See report E Trademark...: See report E Model and/or type reference...: See report E Rating(s)...: See report E age 29 of 54

30 SHEZHE LCS COMLIACE TESTIG LABORATORY LTD. REORT O.: LCS TS E SCOE More sections applicable... Yes [ ] o [ ] 4 EXOSURE LIMITS 4.1 General The exposure limits in this standard apply to continuous sources where the exposure duration is not less than 0,01 ms and not more than any 8-hour period, and should be used as guides in the control of exposure. The values should not be regarded as precisely defined lines between safe and unsafe levels. detailed spectral data of a light source are generally required only if the luminance of the source exceeds 104 cd m Specific factors involved in the determination and application of retinal exposure limits See clause upil diameter Angular subtense of source and measurement field-of-view 4.3 Hazard exposure limits Actinic UV hazard exposure limit for the skin and eye The limits for exposure to ultraviolet radiation incident upon the unprotected skin or eye apply to exposure within any 8- hour period. To protect against injury of the eye or skin from ultraviolet radiation exposure produced by a broadband source, the effective integrated spectral irradiance, Es, of the light source shall not exceed the levels defined by: 400 Es t = Eλ ( λ t) SUV( λ)δt Δλ J m -2, 200 t The permissible time for exposure to ultraviolet radiation incident upon the unprotected eye or skin shall be computed by: t max 30 = E s LED light source ear-uv hazard exposure limit for the eye age 30 of 54

31 SHEZHE LCS COMLIACE TESTIG LABORATORY LTD. REORT O.: LCS TS E For the spectral region 315 nm to 400 nm (UV-A) the total radiant exposure to the eye shall not exceed J m -2 for exposure times less than 1000 s. For exposure times greater than 1000 s (approximately 16 minutes) the UV-A irradiance for the unprotected eye, EUVA, shall not exceed 10 W m E t = Eλ ( λ t) Δt Δλ 1000 SUV, 315 J m -2 ( (t < 1000 s) t The permissible time for exposure to ultraviolet radiation incident upon the unprotected eye for times less than 1000 s, shall be computed by: t max 1000 E S UVA Retinal blue light hazard exposure limit To protect against retinal photochemical injury from chronic blue-light exposure, the integrated spectral radiance of the light source weighted against the blue-light hazard function, B(λ), i.e., the blue light weighted radiance, LB, shall not exceed the levels defined by: L t = L ( λ t) B Δt Δλ 1 B 700 λ, 300 t ( λ) 4 (for t 10 s ) J m -2 sr -1 B 700 For t>10 4 S λ ( λ) Δλ 100 W m -2 sr L = L B Retinal blue light hazard exposure limit - small source Thus the spectral irradiance at the eye Eλ, weighted against the blue-light hazard function B(λ) (see Table 4.2) shall not exceed the levels defined by: 700, EB t= Eλ ( λ t) B( λ) Δt Δλ t (for t 100s) age 31 of 54

32 SHEZHE LCS COMLIACE TESTIG LABORATORY LTD. REORT O.: LCS TS E EB = Eλ B( λ) Δλ For t 100s Retinal thermal hazard exposure limit To protect against retinal thermal injury, the integrated spectral radiance of the light source, L λ,weighted by the burn hazard weighting function B( λ ) (from Figure 4.2 and Table 4.2), i.e., the burn hazard weighted radiance, shall not exceed the levels defined by: LR = Lλ B( λ) Δλ J m α t 2 sr Retinal thermal hazard exposure limit weak visual stimulus For an infrared heat lamp or any nearinfrared source where a weak visual stimulus is inadequate to activate the aversion response, the near infrared (780 nm to 1400 nm) radiance, LIR, as viewed by the eye for exposure times greater than 10 s shall be limited to: us t 10s t>10s LIR = Lλ B( λ) Δλ J m -2 sr -1 α Infrared radiation hazard exposure limits for the eye To avoid thermal injury of the cornea and possible delayed effects upon the lens of the eye (cataractogenesis), ocular exposure to infrared radiation, EIR, over the wavelength range 780 nm to 3000 nm, for times less than 1000 s, shall not exceed: IR 3000 T 1000s 0.75 λ Δλ 1800 W m E = E t For times greater than 1000 s the limit becomes: 3000 T>1000s EIR = E λ Δλ 100 W m Thermal hazard exposure limit for the skin age 32 of 54

33 SHEZHE LCS COMLIACE TESTIG LABORATORY LTD. REORT O.: LCS TS E Visible and infrared radiant exposure (380 nm to 3000 nm) of the skin shall be limited to: 3000 EH t = Eλ ( λ, t) Δλ t 380 t MEASUREMET OF LAMS AD LAM SYSTEMS 5.1 Measurement conditions Measurement conditions shall be reported as part of the evaluation against the exposure limits and the assignment of risk classification Lamp ageing (seasoning)... Seasoning of lamps shall be done as stated in the appropriate IEC lamp standard Test environment... For specific test conditions, see the appropriate IEC lamp standard or in the absence of such standards, the appropriate national standards or manufacturer s recommendations Extraneous radiation... Careful checks should be made to ensure that extraneous sources of radiation and reflections do not add significantly to the measurement results Lamp operation... Operation of the test lamp shall be provided in accordance with: --the appropriate IEC lamp standard. --the lamp manufacturer s recommendation Lamp system operation... The power source for operation of the test lamp shall be provided in accordance with --the appropriate IEC standard. -- the lamp manufacturer s recommendation 5.2 Measurement procedure Irradiance measurements... minimum input aperture diameter of 7 mm maximum input aperture diameter of 50 mm The measurement shall be made in that position of the beam giving the maximum reading. age 33 of 54

34 SHEZHE LCS COMLIACE TESTIG LABORATORY LTD. REORT O.: LCS TS E The measurement instrument is adequate calibrated Radiance measurements Standard method... The measurement made with an optical system The instrument shall be calibrated to read in absolute incident radiant power per unit receiving area and per unit solid angle of acceptance averaged over the field of view (FOV) of the instrument Alternative method... Alternative to an imaging radiance set-up, an irradiance measurement set-up with a circular field stop placed at the source can be used to perform radiance measurements Measurement of source size... The determination of a, the angle subtended ba a source, requires the determination of the 50% emission point of the source ulse width measurement for pulsed sources... The determination of Δt, the nominal pulse duration of a source, requires the determination of the time during which the emission is > 50% of its peak value Analysis methods Weighting curve interpolations... The standardize interpolated values, use linear interpolation on the log of given values to obtion intermediate point at the wavelength internals de-sired. See table Calculations... The calculation of source hazard values shall be performed by weighting the spectral scan by the appropriate function and calculating the total weighted energy Measurement uncertainty... The quality of all measurement results must be quantified by an analysis of the uncertainty. See annex C 6 LAM CLASSIFICATIO age 34 of 54

35 SHEZHE LCS COMLIACE TESTIG LABORATORY LTD. REORT O.: LCS TS E For the purposes of this standard it was decided that the values shall be reported as follows: for lamps intended for general lighting service (GLS), the hazard values shall be reported as either irradiance or radiance values at a distance which produces an illuminance of 500 lux, but not at a distance less than 200 mm; for all other light sources, including pulsed lamp sources, the hazard values shall be reported at a distance of 200 mm. 6.1 Continuous wave lamps Class I Laser roduct Exempt group the exempt group are lamps, which does not pose any photobiological. This requirement is met by any lamp that does not pose --an actinic ultraviolet hazard (Es) within 8- hours exposure (30000 s), nor --a near-uv hazard (EUVA) within 1000 s, (about 16 min) nor --a retinal blue-light hazard (LB) within s (about 2,8 h), nor --a retinal thermal hazard (LR) within 10 s, nor --an infrared radiation hazard for the eye (EIR) within 1000 s Risk Group 1 (Low-Risk) In this group are lamps, which exceeds the limited for the except group but that does not pose: --an actinic ultraviolet hazard (Es) within s, nor --a near ultraviolet hazard (EUVA) within 300 s, nor --a retinal blue-light hazard (LB) within 100 s, nor --a retinal thermal hazard (LR) within 10 s, nor --an infrared radiation hazard for the eye (EIR) within 100 s. lamps that emit infrared radiation without a strong visual stimulus (i.e., less than 10 cd m -2 ) and do not pose a near-infrared retinal hazard (LIR), within 100 s are in Risk Group 1 (Low-Risk) Risk Group 2 (Moderate-Risk) This requirement is met by any lamp that exceeds the limits for risk Group 1, but that does not pose: age 35 of 54

36 SHEZHE LCS COMLIACE TESTIG LABORATORY LTD. REORT O.: LCS TS E an actinic ultraviolet hazard (Es) within 1000 s exposure, nor --a near ultraviolet hazard (EUVA) within 100 s, nor --a retinal blue-light hazard (LB) within 0,25 s (aversion response), nor --a retinal thermal hazard (LR) within 0,25 s (aversion response), nor --an infrared radiation hazard for the eye (EIR) within 10 s. lamps that emit infrared radiation without a strong visual stimulus (i.e., less than 10 cd m -2 ) and do not pose a near infrared retinal hazard (LIR) within 10 s are in Risk Group 2 (Moderate-Risk) Risk Group 3 (High-Risk) Lamps which exceed the limits for Risk Group 2 (Moderate-Risk) are in Risk Group3 (High-Risk). 6.2 ulsed lamps ulsed lamp criteria shall apply to a single pulse and to any group of pulses within 0 25 second A pulsed lamp shall be evaluated at the highest nominal energy loading as specified by the manufacturer The risk group determination of the lamp being tested shall be made as follows: -- A lamp that exceeds the exposure limit shall be classified as belonging to Risk Group 3 (High-Risk). -- For single pulsed lamps, a lamp whose weighted radiant exposure or weighted radiance dose is below the EL shall be classified as belonging to the Exempt Group. -- For repetitively pulsed lamps, a lamp whose weighted radiant exposure or weighted radiance dose is below the EL, shall be evaluated using the Continuous wave risk criteria discussed in clause 6.1, using time averaged values of the pulsed emission. AEX A SUMMARY OF BIOLOGICAL EFFECTS -- Bioeffect datasheet #1: Infrared cataract A.1 Bioeffect: IFRARED CATARACT also known as "industrial heat cataract, "furnaceman's cataract", or "glassblower's cataract". age 36 of 54

37 SHEZHE LCS COMLIACE TESTIG LABORATORY LTD. REORT O.: LCS TS E A.1.1 Organ/Site: Eye/Crystalline Lens. A.1.2 A.1.3 A.1.4 A.1.5 A.1.6 Spectral range: 700 nm to 1400 nm and possibly to 3000 nm. eak of action spectrum: ot known; probably between nm. State of knowledge: Limited threshold data available for acute cataract for rabbit at 1064 nm (Wolbarsht, 1992) and lr-a region (itts and Cullen, 1981); no data for man. Degree of additivity and action spectrum unknown. Good epidemiological evidence (Lydahl, 1984). Time course: oticeable clouding of the lens generally following years of chronic high-level exposure, the elapsed time depending upon how much difference between exposure and threshold, heavy exposures producing reaction in shortest time. Mechanism: Generally presumed to be thermal, although recent evidence suggests possible photochemical reaction - details not understood. The lens may be heated either from direct irradiation (Vogt, 1919) or by conductive heating from the heated iris (Goldman, 1983). A.1.7 Symptoms: Clouding of vision. A.1.8 A.1.9 eeded information: Action spectrum, if existent, for acute and for effects of concomitant ultraviolet radiation exposure; additivity of multiple exposures, and the possibility of delayed effects from recurrent exposures. Experience with lamps: Accidental injury is not known, even from exposure to heat lamps. Limited population exposed. A.1.10 Key references Bioeffect datasheet #2 -- A.2 Bioeffect A.2.1 Organ/Site A.2.2 Spectral range A.2.3 eak of action spectrum A.2.4 State of knowledge A.2.5 Time course A.2.6 Mechanism A.2.7 Symptoms age 37 of 54

38 SHEZHE LCS COMLIACE TESTIG LABORATORY LTD. REORT O.: LCS TS E A.2.8 eeded information A.2.9 Experience with lamps A.2.10 Key references Bioeffect datasheet #3 -- A.3 Bioeffect A.3.1 Organ/Site A.3.2 Spectral range A.3.3 eak of action spectrum A.3.4 State of knowledge A.3.5 Time course A.3.6 Mechanism A.3.7 Symptoms A.3.8 eeded information A.3.9 Experience with lamps A.3.10 Key references Bioeffect datasheet #4 -- A.4 Bioeffect A.4.1 Organ/Site A.4.2 Spectral range A.4.3 eak of action spectrum A.4.4 State of knowledge A.4.5 Time course A.4.6 Mechanism A.4.7 Symptoms A.3.8 eeded information A.4.9 Experience with lamps A.4.10 Key references Bioeffect datasheet #5 -- A.5 Bioeffect A.5.1 Organ/Site A.5.2 Spectral range A.5.3 eak of action spectrum A.5.4 State of knowledge A.5.5 Time course A.5.6 Mechanism A.5.7 Symptoms A.5.8 eeded information age 38 of 54

39 SHEZHE LCS COMLIACE TESTIG LABORATORY LTD. REORT O.: LCS TS E A.5.9 Experience with lamps A.5.10 Key references AEX B MEASUREMET METHOD B.1 Instrumentation B.1.1 Double monochromator: Recommended instrument B.1.2 Broadband detectors B.2 Instrument limitations B.2.1 oise equivalent irradiance B.2.2 Instrument spectral response B.2.3 Wavelength accuracy B.2.4 Stray radiant power B.2.5 Input optics for spectral irradiance measurements: Recommendation B.2.6 Linearity B.3 Calibration sources AEX C UCERTAITY AALYSIS AEX D GEERAL REFERECES AEX ZA ormative references to international publications with their corresponding European publications AEX ZB EXOSURE LIMITS (EL S) See AEX ZB above age 39 of 54

40 SHEZHE LCS COMLIACE TESTIG LABORATORY LTD. REORT O.: LCS TS Tables Table 4.1 Wavelength 1 λ, nm Spectral weighting function for assessing ultraviolet hazards for skin and eye. UV hazard function Wavelength UV hazard function SUV(λ) λ, nm SUV(λ) 200 0, * 0, , , , , , , , , , , , , , , , , , , , , * 0, , , * 0, , , , , , , , , , , , , , , , , * 0, , , , * 0, , , , , , , , Wavelengths chosen are representative: other values should be obtained by logarithmic interpolation at intermediate wavelengths. * Emission lines of a mercury discharge spectrum. age 40 of 54

41 SHEZHE LCS COMLIACE TESTIG LABORATORY LTD. REORT O.: LCS TS Tables Table 4.2 Spectral weighting functions for assessing retinal hazards from broadband optical sources. Wavelength Blue-light hazard function Burn hazard function nm B(λ) R(λ) 300 0, , , , , , , , , , , , , , , , ,01 0, ,013 0, ,025 0, ,05 0, ,10 1, ,20 2, ,40 4, ,80 8, ,90 9, ,95 9, ,98 9, ,00 10, ,00 10, ,97 9, ,94 9, ,90 9, ,80 8, ,70 7, ,62 6, ,55 5,5 age 41 of 54

42 SHEZHE LCS COMLIACE TESTIG LABORATORY LTD. REORT O.: LCS TS Tables Table 4.2 Spectral weighting functions for assessing retinal hazards from broadband optical sources ,45 4, ,40 4, ,22 2, ,16 1, [(450-λ)/50] 1, ,001 1, [(700-λ)/500] , , ,02(1150-λ) ,02 Table 5.4 Hazard ame Actinic UV skin & eye Summary of the ELs for the surface of the skin or cornea (irradiance based values) Relevant equation Es = E λ S(λ) Δλ Wavelength range nm Exposure duration sec Limiting aperture rad (deg) EL in terms of constant irradiance W m < ,4 (80) 30/t /t Eye UV-A E UVA = E λ Δλ 1,4 (80) > Blue-light E B /t < 0,011 small source = E λ B(λ) Δλ >100 1, /t 0,75 Eye IR E IR = E λ Δλ ,4 (80) > Skin thermal E H = E λ Δλ < 10 2 sr 20000/t 0,75 age 42 of 54

43 SHEZHE LCS COMLIACE TESTIG LABORATORY LTD. REORT O.: LCS TS Tables Table 5.5 Summary of the ELs for the retina (radiance based values) Hazard ame Blue light Relevant equation L B = L λ B(λ) Δλ Wavelength range nm Exposure duration sec 0, Field of view radians 0,011 (t/10) 0,011 0,0011 t 0,1 EL in terms of constant irradiance -1 W m -2 sr 106/t 106/t 106/t 100 Retinal thermal L R = L λ R(λ) Δλ < 0,25 0, ,0017 0,011 (t/10) 50000/(α t 0,25 ) 50000/(α t 0,25 ) Retinal thermal (weak visual stimulus) L IR = L λ R(λ) Δλ > 10 0, /α Table 6.6 Emission limits for risk groups of continuous wave lamps. Risk Action spectrum Symbol Emission limits Exempt Low risk Mod risk Actinic UV S UV (λ) Es 0,001 0,003 0,03 W m -2 Units ear UV E UVA W m -2 Blue light B(λ) L B W m -2 sr Blue light, small source Retinal thermal Retinal thermal, weak visual stimulus** IR radiation, B(λ) E B 1,0* 1,0 400 W m -2 R(λ) L R 28000/α 28000/α 71000/α -1 W m -2 sr -1 R(λ) L IR 6000/α 6000/α 6000/α W m -2 sr E IR W m -2 eye * Small source defined as one with α < 0,011 radian. Averaging field of view at s is 0,1 radian. ** Involves evaluation of non-gls source age 43 of 54