ENGI 1313 Mechanics I
|
|
|
- Dwayne Pope
- 6 years ago
- Views:
Transcription
1 ENGI 1313 Mechanics I Lecture 01: Course Introduction and General Principles Shawn Kenny, Ph.D., P.Eng. Assistant Professor Faculty of Engineering and Applied Science Memorial University of Newfoundland spkenny@engr.mun.ca
2 ENGI 1313 Resources Textbook Engineering Mechanics Statics and Dynamics, 11 th Edition R.C. Hibbeler Pearson Prentice Hall (ISBN ) S. Kenny, Ph.D., P.Eng.
3 ENGI 1313 Resources Statics Study Pack Chapter reviews Access to Pearson Prentice Hall website wps.prenhall.com/ esm_hibbeler_engmech_ S. Kenny, Ph.D., P.Eng.
4 ENGI 1313 Resources MUN Engineering Instructor Website Course information Professor contact information Office Hours Mon. & Wed. (3-5PM) Other times can be scheduled by appointment S. Kenny, Ph.D., P.Eng.
5 ENGI 1313 Resources General Websites en.wikibooks.org/wiki/statics S. Kenny, Ph.D., P.Eng.
6 Academic & Administrative Policies MUN Engineering Website Engineering exam policy MUN Website University regulations Student policies S. Kenny, Ph.D., P.Eng.
7 Course Schedule Lectures Day: Mon., Tue., Wed. & Fri Time: Location: IIC2001 No Lectures Oct. 8 & 9 Fall Break Nov. 12 Remembrance Day S. Kenny, Ph.D., P.Eng.
8 Planned Lecture Schedule S. Kenny, Ph.D., P.Eng.
9 Course Perspective Educational Process Critical thinking Making mistakes Asking questions Learning Applying knowledge Engagement Professional development S. Kenny, Ph.D., P.Eng.
10 Course Perspective Fundamental Engineering Course Mechanics Foundation to build upon Work Ethic Regular study habits Lecture and tutorial schedule is known Critical thinking & problem solving Critical thinking & problem solving S. Kenny, Ph.D., P.Eng.
11 Objective of the Lecture Notes to explicitly follow the textbook to provide complement the textbook by providing additional worked examples to occasionally present complementary material that illustrates practical engineering applications of the theory S. Kenny, Ph.D., P.Eng.
12 Lecture 01 Objectives to introduce field of mechanics to introduce some fundamental concepts to review units of measurement and systems to provide guidance on engineering calculation procedures and analysis S. Kenny, Ph.D., P.Eng.
13 Introduction to Mechanics Mechanics Rigid Body Mechanics Deformation Mechanics Fluid Mechanics Statics Dynamics This course only examines Rigid Body Mechanics: Statics S. Kenny, Ph.D., P.Eng.
14 General Principles Statics Effect of loads on bodies in static equilibrium Balanced loads At rest or under motion at constant velocity S. Kenny, Ph.D., P.Eng.
15 General Principles Kinematics Effect of motion without consideration of loads S. Kenny, Ph.D., P.Eng.
16 General Principles Dynamics Effect of loads on bodies in motion Unbalanced loads Acceleration S. Kenny, Ph.D., P.Eng.
17 Brief Historical Perspective Engineering Mechanics and Principles Geometry Empirical Societal Applications Military Civilian Shipbuilding S. Kenny, Ph.D., P.Eng.
18 Simple Machines Inclined plane Wedge Screw Lever Pulley Wheel and axle S. Kenny, Ph.D., P.Eng.
19 Simple Machines Inclined Plane S. Kenny, Ph.D., P.Eng.
20 Simple Machines Lever S. Kenny, Ph.D., P.Eng.
21 Simple Machines Lever S. Kenny, Ph.D., P.Eng.
22 Fundamental Concepts Idealizations Particle Constant mass Negligible size S. Kenny, Ph.D., P.Eng.
23 Fundamental Concepts Idealizations Rigid Body Combination of particles Finite size Relative position of particles remain fixed No internal deformation P Rigid Body P P P Deformable Body S. Kenny, Ph.D., P.Eng.
24 Fundamental Concepts Idealizations Concentrated Force Load effects acting at a point on a body Load acts on small dimensions relative to body size S. Kenny, Ph.D., P.Eng.
25 Fundamental Concepts Newton s Laws of Motion Basis of classical mechanics Motion Momentum r r p = mv Massive, rigid body Empirical Inertial reference frame (no acceleration) S. Kenny, Ph.D., P.Eng.
26 Fundamental Concepts Newton s 1 st Law Inertia Particle equilibrium Rest Constant velocity Unbalanced forces External Change in velocity, acceleration F 1 V = 0, v F 2 F S. Kenny, Ph.D., P.Eng.
27 Fundamental Concepts Newton s 2 nd Law Acceleration Object in motion Unbalanced external forces Acceleration Proportional to force magnitude Direction of applied net unbalanced force r F = d dt r r ( mv ) = m a S. Kenny, Ph.D., P.Eng.
28 Fundamental Concepts Newton s 3 rd Law Reciprocal Action Action Reaction To every action there is an equal and opposite reaction Equal force magnitude Opposite force sense or direction S. Kenny, Ph.D., P.Eng.
29 Fundamental Concepts Newton s Law of Gravitational Attraction Point-to-point mass attraction through centers Force point mass 1 / distance 2 F = G m 1 r m S. Kenny, Ph.D., P.Eng.
30 Fundamental Concepts Weight Force acting on particle due to gravity g = acceleration due to gravity Varies altitude, latitude not absolute Standard is m/s 2 m W = mg 2e = r m g S. Kenny, Ph.D., P.Eng.
31 Fundamental Concepts Physical Quantities Characteristics Measurement process System of units Length (L) Distance, size Relative position of points in space Time (T) Sequence or succession of events Mass (M) Intrinsic property of matter Relative action between bodies S. Kenny, Ph.D., P.Eng.
32 Fundamental Concepts Forces Type Direct contact Electromagnetic Gravitational Characteristics Magnitude Direction Point of application S. Kenny, Ph.D., P.Eng.
33 Units of Measurement Standardized Quantity Physical Property Scientific method reproducible Economic and scientific drivers Historical Context Human body Examples: digit, palm, cubit Variability Examples: Arabic, Egyptian, Greek, Roman S. Kenny, Ph.D., P.Eng.
34 Units of Measurement International System of Units Unified, rational system Units of measurement Decimal system S. Kenny, Ph.D., P.Eng.
35 Units of Measurement Imperial and US Customary Similarities and differences Multiple units of measurement Length inch, foot, chain, furlong Mass grain, ounce, pound, Relatively more complex rules for conversion 12 inches 5280 feet 16 ounces = 1 foot = 1 mile = 1 pound (mass) Confusion on units Pound force versus pound mass S. Kenny, Ph.D., P.Eng.
36 Units of Measurement Base Units Fundamental structure for the system of units SI meter (m), kilogram (kg), second (s) FPS foot (ft), pound (lb), second (s) S. Kenny, Ph.D., P.Eng.
37 Units of Measurement Derived Units Physical laws Base units Quantity Symbol Base Units Dimension Force N kg m s -2 M L T -2 Pressure Pa kg m 2 s -2 M L 2 T -2 Energy J kg m -1 s -2 M L -1 T -2 Compound Units Area, volume S. Kenny, Ph.D., P.Eng.
38 Engineering Calculations Significant Figures and Rounding Measurement tools and error Basis of engineering data Precision versus accuracy Computational tools Numerical precision Constants (e.g. e, π) Consistent Use Measurement Reporting meters millimeters S. Kenny, Ph.D., P.Eng.
39 Engineering Analysis Problem Statement Objective Data and diagrams Known and unknown quantities Applicable Theory Assumptions, limitations and constraints Problem Solution Dimensionally homogeneous, consistent units Significant figures and rounding Assessment Engineering judgment, common sense S. Kenny, Ph.D., P.Eng.
40 Representative Problems Hibbeler (2007) Textbook Problem Set 1-1 to to 1-20 Degree of Difficulty Easy Medium Estimated Time 5-10min 10-15min Study Pack Review questions 1 to S. Kenny, Ph.D., P.Eng.
41 References Hibbeler (2007) S. Kenny, Ph.D., P.Eng.
ME 201 Engineering Mechanics: Statics. Unit 1.1 Mechanics Fundamentals Newton s Laws of Motion Units
ME 201 Engineering Mechanics: Statics Unit 1.1 Mechanics Fundamentals Newton s Laws of Motion Units Additional Assistance Tutoring Center Mck 272 Engineering Walk-In Help Lab Aus??? Schedule to
Mechanics of Material 11/29/2017. General Information
General Information Assistant Lecturer: Asmaa Ab. Mustafa Email : asmaa.abdulmajeed@ishik.edu.iq Department : Civil Engineering Course Title : Engineering Mechanics I Code : Credit : 2 Office Hour : Monday
GENERAL PRINCIPLES. Statics, Units, Calculations & problem Solving Students will be able to:
CHAPTER Engineering Mechanics: Statics Tenth Edition GENERAL PRINCIPLES College of Engineering Department of Mechanical Engineering 1 by Dr. Ibrahim A. Assakkaf SPRING 2007 ENES 110 Statics Department
ENGI 1313 Mechanics I
ENGI 1313 Mechanics I Lecture 25: Equilibrium of a Rigid Body Shawn Kenny, Ph.D., P.Eng. Assistant Professor Faculty of Engineering and Applied Science Memorial University of Newfoundland spkenny@engr.mun.ca
Chapter 5. The Laws of Motion
Chapter 5 The Laws of Motion The Laws of Motion The description of an object in motion included its position, velocity, and acceleration. There was no consideration of what might influence that motion.
Chapter 5. The Laws of Motion
Chapter 5 The Laws of Motion Sir Isaac Newton 1642 1727 Formulated basic laws of mechanics Discovered Law of Universal Gravitation Invented form of calculus Many observations dealing with light and optics
CH. I ME2560 STATICS General Principles GENERAL PRINCIPLES. Rigid body mechanics. Fluid mechanics
1. MECHANICS GENERAL PRINCIPLES Mechanics is the branch of physics (classic) that studies the state of rest or motion of bodies subjected to the action of forces. Rigid body mechanics Mechanics Deformable
ENGI 5708 Design of Civil Engineering Systems
ENGI 5708 Design of Civil Engineering Systems Lecture 09: Characteristics of Simplex Algorithm Solutions Shawn Kenny, Ph.D., P.Eng. Assistant Professor Faculty of Engineering and Applied Science Memorial
ENGI 1313 Mechanics I
ENGI 1313 Mechanics I Lecture 43: Course Material Review Shawn Kenny, Ph.D., P.Eng. ssistant Professor aculty of Engineering and pplied Science Memorial University of Newfoundland spkenny@engr.mun.ca inal
Statics and Mechanics of Materials
Second E 1 Introduction CHAPTER Ferdinand P. Beer E. Russell Johnston, Jr. John T. DeWolf David F. Mazurek Contents What is Mechanics? Systems of Units Method of Solving Problems Numerical Accuracy 1-2
Chapter 5. The Laws of Motion
Chapter 5 The Laws of Motion The Laws of Motion The description of an object in There was no consideration of what might influence that motion. Two main factors need to be addressed to answer questions
ME101: Engineering Mechanics ( )
ME101: Engineering Mechanics (3 1 0 8) 2016-2017 (II Semester); Division IV Budhaditya Hazra Room N-307 Department of Civil Engineering budhaditya.hazra@iitg.ernet.in Phone: 258 3334/5334 Web: www.iitg.ernet.in/budhaditya.hazra
MECHANICS, UNITS, NUMERICAL CALCULATIONS & GENERAL PROCEDURE FOR ANALYSIS
MECHANICS, UNITS, NUMERICAL CALCULATIONS & GENERAL PROCEDURE FOR ANALYSIS Today s Objectives: Students will be able to: In-Class activities: a) Explain mechanics / statics. Reading Quiz b) Work with two
*Definition of Mechanics *Basic Concepts *Newton s Laws *Units
INTRODUCTION *Definition of Mechanics *Basic Concepts *Newton s Laws *Units Mechanics may be defined as the physical science which describes and predicts the conditions of rest or motion of bodies under
NEWTON S LAWS OF MOTION (EQUATION OF MOTION) (Sections )
NEWTON S LAWS OF MOTION (EQUATION OF MOTION) (Sections 13.1-13.3) Today s Objectives: Students will be able to: a) Write the equation of motion for an accelerating body. b) Draw the free-body and kinetic
Forces and Newton s Laws Reading Notes. Give an example of a force you have experienced continuously all your life.
Forces and Newton s Laws Reading Notes Name: Section 4-1: Force What is force? Give an example of a force you have experienced continuously all your life. Give an example of a situation where an object
Lecture PowerPoints. Chapter 4 Physics: Principles with Applications, 6 th edition Giancoli
Lecture PowerPoints Chapter 4 Physics: Principles with Applications, 6 th edition Giancoli 2005 Pearson Prentice Hall This work is protected by United States copyright laws and is provided solely for the
STATICS. Introduction Lecture Notes: J. Walt Oler Texas Tech University. Vector Mechanics for Engineers: Statics VECTOR MECHANICS FOR ENGINEERS:
CHAPTER VECTOR MECHANICS FOR ENGINEERS: STATICS 1 Ferdinand P. Beer E. Russell Johnston, Jr. Introduction Lecture Notes: J. Walt Oler Texas Tech University Contents What is Mechanics? Fundamental Concepts
Honors Physics 1 for Scientists and Engineers
Honors Physics 1 for Scientists and Engineers Physics 0475, University of Pittsburgh (Fall 2017) Syllabus Course Information Meeting Time: Mon, Tue, Wed, Thu, Fri: 11:00-11:50 AM Thaw Hall 102 Instructor
Force in Mechanical Systems. Overview
Force in Mechanical Systems Overview Force in Mechanical Systems What is a force? Created by a push/pull How is a force transmitted? For example by: Chains and sprockets Belts and wheels Spur gears Rods
Course Syllabus for CIVL 2110 STATICS Spring
Course Syllabus for CIVL 2110 STATICS Spring 2016-2017 Instructor: email: ilias@ust.hk Dr. Ilias DIMITRAKOPOULOS room: 3583 tel: 2358-5975: office hours Wed, Fri: 11:00-12:00 Lectures: Wed, Fri 16:30-18:00
SPH 4C Unit 2 Mechanical Systems
SPH 4C Unit 2 Mechanical Systems Forces and Free Body Diagrams Learning Goal: I can consistently identify and draw Free Body Diagrams for given real world situations. There are 4 fundamental forces Gravity
PHYS-2010: General Physics I Course Lecture Notes Section V
PHYS-2010: General Physics I Course Lecture Notes Section V Dr. Donald G. Luttermoser East Tennessee State University Edition 2.5 Abstract These class notes are designed for use of the instructor and students
Review for 3 rd Midterm
Review for 3 rd Midterm Midterm is on 4/19 at 7:30pm in the same rooms as before You are allowed one double sided sheet of paper with any handwritten notes you like. The moment-of-inertia about the center-of-mass
Engineering Statics PHYS 141 University Studies Program. Course Outline
Engineering Statics PHYS 141 University Studies Program Course Outline COURSE IMPLEMENTATION DATE: 2012 OUTLINE EFFECTIVE DATE: January 2016 COURSE OUTLINE REVIEW DATE: September 2021 GENERAL COURSE DESCRIPTION:
Motion *All matter in the universe is constantly at motion Motion an object is in motion if its position is changing
Aim: What is motion? Do Now: Have you ever seen a race? Describe what occurred during it. Homework: Vocabulary Define: Motion Point of reference distance displacement speed velocity force Textbook: Read
ENGR 292 Fluids and Thermodynamics
ENGR 292 Fluids and Thermodynamics Scott Li, Ph.D., P.Eng. Mechanical Engineering Technology Camosun College Jan.13, 2017 Review of Last Class Course Outline Class Information Contact Information, Website
e14 - applied mechanics: statics e14 - applied mechanics: statics mon/wed/fri, 12:50-2:05pm, mon/wed/fri, 12:50-2:05pm,
why do things break? to reliably predict what s going on inside a structure, we need to know the forces that act on it. it s newton s law that helps us to determine these forces. basically, this course
ENGI 5708 Design of Civil Engineering Systems
ENGI 5708 Design of Civil Engineering Systems Lecture 04: Graphical Solution Methods Part 1 Shawn Kenny, Ph.D., P.Eng. Assistant Professor Faculty of Engineering and Applied Science Memorial University
Engineering Statics ENGR 2301 Chapter 1. Introduction And Measurement
Engineering Statics ENGR 2301 Chapter 1 Introduction And Measurement What is Mechanics? Mechanics is the science which describes and predicts the conditions of rest or motion of bodies under the action
Applying Newton s Laws
Chapter 5 Applying Newton s Laws PowerPoint Lectures for University Physics, Thirteenth Edition Hugh D. Young and Roger A. Freedman Lectures by Wayne Anderson Copyright 2012 Pearson Education Inc. To use
FORCES. Integrated Science Unit 8. I. Newton s Laws of Motion
Integrated Science Unit 8 FORCES I. Newton s Laws of Motion A. Newton s First Law Sir Isaac Newton 1643 1727 Lincolnshire, England 1. An object at rest remains at rest, and an object in motion maintains
Physics 2240, Spring 2015
1 Physics 2240, Spring 2015 Instructor Drew Von Maluski vonmaluskid@uwplatt.edu UW-Platteville Office: Engineering Hall 227 Office Hours: Open Door Policy Tentative Scheduled Office Hours: Monday 9 11am
Physics B Newton s Laws AP Review Packet
Force A force is a push or pull on an object. Forces cause an object to accelerate To speed up To slow down To change direction Unit: Newton (SI system) Newton s First Law The Law of Inertia. A body in
Flipping Physics Lecture Notes: Demonstrating Rotational Inertia (or Moment of Inertia)
Flipping Physics Lecture Notes: Demonstrating Rotational Inertia (or Moment of Inertia) Have you ever struggled to describe Rotational Inertia to your students? Even worse, have you ever struggled to understand
ENGINEERING MECHANICS STATIC. Mechanic s is the oldest of the physical sciences which deals with the effects of forces on objects.
INTRODUCTION TO STATICS: 1-1 Mechanics: Mechanic s is the oldest of the physical sciences which deals with the effects of forces on objects. The subject of mechanics is logically divided into two parts
Engineering Statics and Dynamics PHYS 170 University Studies Program. Course Outline
Engineering Statics and Dynamics PHYS 170 University Studies Program Course Outline COURSE IMPLEMENTATION DATE: 2012 OUTLINE EFFECTIVE DATE: January 2016 COURSE OUTLINE REVIEW DATE: September 2021 GENERAL
2007 Pearson Prentice Hall This work is protected by United States copyright laws and is provided solely for
Lecture Outlines Chapter 5 Physics, 3 rd Edition James S. Walker 2007 Pearson Prentice Hall This work is protected by United States copyright laws and is provided solely for the use of instructors in teaching
Chapter 4 Dynamics: Newton s Laws of Motion
Chapter 4 Dynamics: Newton s Laws of Motion Force Newton s First Law of Motion Mass Newton s Second Law of Motion Newton s Third Law of Motion Weight the Force of Gravity; and the Normal Force Applications
Karadeniz Technical University
Karadeniz Technical University College of Engineering Department of Mechanical Engineering ME-2005 Dynamics 2018 Fall Semester Instructor: Ömer Necati Cora (Assoc. Prof. Dr.) K.T.Ü Dept. of Mech. Eng.
Unit Two Chapter Three Forces
Unit Two Chapter Three Forces Key Concepts After completing this chapter you will be able to distinguish between different types of forces and describe how they affect the velocity and acceleration of
Lecture PowerPoints. Chapter 4 Physics: Principles with Applications, 7 th edition Giancoli
Lecture PowerPoints Chapter 4 Physics: Principles with Applications, 7 th edition Giancoli This work is protected by United States copyright laws and is provided solely for the use of instructors in teaching
Chapter 5. The Laws of Motion
Chapter 5 The Laws of Motion The astronaut orbiting the Earth in the Figure is preparing to dock with a Westar VI satellite. The satellite is in a circular orbit 700 km above the Earth's surface, where
ENGI 5708 Design of Civil Engineering Systems
ENGI 5708 Design of Civil Engineering Systems Lecture 10: Sensitivity Analysis Shawn Kenny, Ph.D., P.Eng. Assistant Professor Faculty of Engineering and Applied Science Memorial University of Newfoundland
People to Know. Bring to Lecture Everyday: Course Materials. Bring to Discussion Everyday: Breakdown. Welcome to CHEM 102B. Coursework and Grading
People to Know Welcome to CHEM 102B January 17, 2006 Timothy A. Richmond, Ph. D. Instructor Josh Ritchey Teaching Assistant Danielle Busser Teaching Assistant Lee Cremar Teaching Assistant Oscar Rodriguez,
EQUATIONS OF MOTION: RECTANGULAR COORDINATES
EQUATIONS OF MOTION: RECTANGULAR COORDINATES Today s Objectives: Students will be able to: 1. Apply Newton s second law to determine forces and accelerations for particles in rectilinear motion. In-Class
Chemistry 151. Matter And Measurement
Chemistry 151 Professor James H. Geiger Office: Chemistry Building, Room 9 Office Hours: 1:30-2:30 PM MWF, and other times by appointment (send me an email). You can also drop by, but I might be busy.
Course: Phys-109 General Physics I. Text book: Physics, 6 th edition, D. C. Giancoli.
Few Initial Remarks Course: Phys-109 General Physics I Text book: Physics, 6 th edition, D. C. Giancoli. Few Initial Remarks Instructor: Dr. Mauricio Barbi Email: barbi@uregina.ca Tel: 585-4260 Office:
l Every object in a state of uniform motion tends to remain in that state of motion unless an
Motion and Machine Unit Notes DO NOT LOSE! Name: Energy Ability to do work To cause something to change move or directions Energy cannot be created or destroyed, but transferred from one form to another.
ME 108 Statics. Ahmet Erkliğ Office No: 315 4th floor of Mechanical Engineering Departmen
ME 108 Statics Ahmet Erkliğ erklig@gantep.edu.tr Office No: 315 4th floor of Mechanical Engineering Departmen What is Engineering Mechanics? Engineering Mechanics is a discipline that studies the response
Bergen Community College Division of Math, Science and Technology Department of Physical Sciences. Course Syllabus PHY 294 Engineering Mechanics
Bergen Community College Division of Math, Science and Technology Department of Physical Sciences Course Syllabus PHY 294 Engineering Mechanics Semester and year: Course Number: Meeting Times and Locations:
Crosswalk of Georgia Performance Standards & Georgia Standards of Excellence GSE Implementation in Eighth Grade
S8P1. Students will examine the scientific view of the nature of matter. a. Distinguish between atoms and molecules. b. Describe the difference between pure substances (elements and compounds) and mixtures.
FME201 Solid & Structural Mechanics I
FME201 Solid & Structural Mechanics I Dr.Hussein Jama Hussein.jama@uobi.ac.ke Office 414 Lecture: Mon 11am -1pm (E207) Tutorial Tue 12-1pm (E207) 10/1/2013 1 Outline This lecture is based on chapter 1
Lecture 4-1 Force, Mass, Newton's Laws Throughout this semester we have been talking about Classical Mechanics which studies motion of objects at
Lecture 4-1 orce, Mass, Newton's Laws Throughout this semester we have been talking about Classical Mechanics which studies motion of objects at every-day scale. Classical mechanics can be subdivided into
1 centimeter (cm) 5 10 millimeters (mm) 1 meter (m) centimeters. 1 kilometer (km) 5 1,000 meters. Set up equivalent ratios and cross multiply.
Domain 2 Lesson 16 Convert Measurements Common Core State Standard: 6.RP.3.d Getting the Idea The tables below show some conversions for units of length in both the customary system and the metric system.
Chapter 4. The Laws of Motion. Dr. Armen Kocharian
Chapter 4 The Laws of Motion Dr. Armen Kocharian Classical Mechanics Describes the relationship between the motion of objects in our everyday world and the forces acting on them Conditions when Classical
Newton s Laws of Motion and Gravitation
Newton s Laws of Motion and Gravitation Introduction: In Newton s first law we have discussed the equilibrium condition for a particle and seen that when the resultant force acting on the particle is zero,
From Last Time. position: coordinates of a body velocity: rate of change of position. change in position change in time
From Last Time position: coordinates of a body velocity: rate of change of position average : instantaneous: average velocity over a very small time interval acceleration: rate of change of velocity average:
1. Math 101. Core Competency in Mathematics. richard/math101
1. Math 101 Core Competency in Mathematics Dept. of Mathematical Sciences Northern Illinois University http://www.math.niu.edu Professor Richard Blecksmith richard@math.niu.edu http://www.math.niu.edu/
Lecture PowerPoints. Chapter 4 Physics: for Scientists & Engineers, with Modern Physics, 4th edition Giancoli
Lecture PowerPoints Chapter 4 Physics: for Scientists & Engineers, with Modern Physics, 4th edition Giancoli 2009 Pearson Education, Inc. This work is protected by United States copyright laws and is provided
INTERNATIONAL ISLAMIC UNIVERSITY MALAYSIA COURSE OUTLINE
INTERNATIONAL ISLAMIC UNIVERSITY MALAYSIA COURSE OUTLINE Kulliyyah / Institute Department / Centre Programme Name of Course / Mode Engineering Mechanical Engineering All Engineering programmes Statics
PS 150 Physics I for Engineers Embry-Riddle Aeronautical University Fall 2018
PS 150 Physics I for Engineers Embry-Riddle Aeronautical University Fall 2018 Instructor: M. Anthony Reynolds email: reynodb2@erau.edu web: http://pages.erau.edu/~reynodb2/ps150 phone: (386) 226-7752 office:
ChE 201: Introduction to Chemical Engineering. CHE 201: Introduction to Chemical Engineering Calculations
بسم االله الرحمن الرحيم CHE 201: Introduction to Chemical Engineering Calculations Dr. Saad Al-Shahrani Text Book: Basic Principles and Calculations in Chemical Engineering, by David M. Himmelblau and
Academic Course Description. BHARATH UNIVERSITY Faculty of Engineering and Technology Department of Mechanical Engineering
BME202 - ENGINEERING MECHANICS Course (catalog) description Academic Course Description BHARATH UNIVERSITY Faculty of Engineering and Technology Department of Mechanical Engineering BME202 - ENGINEERING
Lesson 4 Momentum and Energy
Lesson 4 Momentum and Energy Introduction: Connecting Your Learning The previous lessons concentrated on the forces that cause objects to change motion. Lesson 4 will introduce momentum and energy, as
Umm Al-Qura University Dr. Abdulsalam Ali. Physics 101. Lecture 1. Lecturer: Dr. Abdulsalam Ali Soud
Physics 101 Lecture 1 Lecturer: Dr. Abdulsalam Ali Soud Course Text Book Course Text Book Physics 4 th By James S. Walker COURSE SYLLABUS Week No. 1 2 3 4 Contents Introduction to Physics 1- Unit of Length,
CHAPTER 1 INTRODUCTION TO ENGINEERING CALCULATIONS
CHAPTER 1 INTRODUCTION TO ENGINEERING CALCULATIONS Sem 1, 2016/2017 ERT 214 Material and Energy Balance / Imbangan Bahan dan Tenaga After completing this chapter, you should be able to do the following:
College Physics (PHY 1301)
College Physics (PHY 1301) Lecture 1. Introduction Syllabus and teaching strategy Newtonian Mechanics, Fluid Mechanics and Thermodynamics Physical Quantities, Measurements, Units and Vectors 1 6/1/2015
Useful Formulas and Calculations
Drive Design Speed Ratio = rpm (faster) = PD = N rpm (slower) pd n Where: rpm = Revolutions per minute PD = Larger pitch diameter pd = Smaller pitch diameter N = Larger sprocket grooves n = Smaller sprocket
Chapter 3 The Laws of motion. The Laws of motion
Chapter 3 The Laws of motion The Laws of motion The Concept of Force. Newton s First Law. Newton s Second Law. Newton s Third Law. Some Applications of Newton s Laws. 1 5.1 The Concept of Force Force:
SYLLABUS FORM WESTCHESTER COMMUNITY COLLEGE Valhalla, NY lo595. l. Course #: PHYSC NAME OF ORIGINATOR /REVISOR: ALENA O CONNOR
SYLLABUS FORM WESTCHESTER COMMUNITY COLLEGE Valhalla, NY lo595 l. Course #: PHYSC 121 2. NAME OF ORIGINATOR /REVISOR: ALENA O CONNOR NAME OF COURSE ENGINEERING PHYSICS 1 WITH LAB 3. CURRENT DATE: SUMMER
Milford Public Schools Curriculum
Milford Public Schools Curriculum Department: SCIENCE Course Name: Grade 8 Course Description Physical Science UNIT 1 - Motion LEARNING GOALS Enduring Understanding(s): Motion is relative to a reference
MER419: Design of Mechanical Systems
SPRING 2006, M/W 1:45pm - 4:05pm F 1:45pm 2:50pm Rm N201 Rm N201 Hours: MWF 10:00am-11:00am or By Appointment Professor Abraham Tchako, Ph.D., Dipl. Ing., SFI Department of Butterfield 301A 388-6144 tchakoa@union.edu
Lecture III. Introduction to Mechanics, Heat, and Sound /FIC 318
Introduction to Mechanics, Heat, and Sound /FIC 318 Lecture III Motion in two dimensions projectile motion The Laws of Motion Forces, Newton s first law Inertia, Newton s second law Newton s third law
Physical Science midterm study guide. Chapter 1 and 2
Physical Science midterm study guide Chapter 1 and 2 1. Explain the difference between a scientific law and a scientific theory a. Laws generalize observations b. Theories explain observations 2. Select
HOUSTON COMMUNITY COLLEGE COURSE OUTLINE FOR Engineering Statics (ENGR 2301) Fall 2012 Class Number: 24432
HOUSTON COMMUNITY COLLEGE COURSE OUTLINE FOR Engineering Statics (ENGR 2301) Fall 2012 Class Number: 24432 Time and Location 9:00 AM 01:00 PM, Fridays, HCC Northwest College, Alief Branch, Room Number
INTERMEDIATE MECHANICS OF DEFORMABLE BODIES (58:150/51:151/53:140) Fall 2003
INTERMEDIATE MECHANICS OF DEFORMABLE BODIES (58:150/51:151/53:140) Fall 2003 Instructor: Lecture: Office Hours: Sharif Rahman, 2140 SC, 335-5679, rahman@engineering.uiowa.edu WF, 3:30 4:45 pm at 3315 SC
Lecture PowerPoints. Chapter 11. Physics for Scientists and Engineers, with Modern Physics, 4 th edition Giancoli
Lecture PowerPoints Chapter 11 Physics for Scientists and Engineers, with Modern Physics, 4 th edition Giancoli 2009 Pearson Education, Inc. This work is protected by United States copyright laws and is
The Laws of Motion. Newton s first law Force Mass Newton s second law Newton s third law Examples
The Laws of Motion Newton s first law Force Mass Newton s second law Newton s third law Examples Isaac Newton s work represents one of the greatest contributions to science ever made by an individual.
Newton s First Law and IRFs
Goals: Physics 207, Lecture 6, Sept. 22 Recognize different types of forces and know how they act on an object in a particle representation Identify forces and draw a Free Body Diagram Solve 1D and 2D
Chapter 4 Dynamics: Newton s Laws of Motion
Chapter 4 Dynamics: Newton s Laws of Motion Force Newton s First Law of Motion Mass Newton s Second Law of Motion Newton s Third Law of Motion Weight the Force of Gravity; and the Normal Force Applications
Chemistry 104 Chapter Two PowerPoint Notes
Measurements in Chemistry Chapter 2 Physical Quantities Measurable physical properties such as height, volume, and temperature are called Physical quantity. A number and a unit of defined size is required
Course Instructor. Home Page. Title Page. Page 2 of 33. Go Back. Full Screen. Close. Quit
Rutgers University Department of Physics & Astronomy 01:750:271 Honors Physics I Lecture 1 Page 1 of 33 Course Instructor Duiliu Emanuel Diaconescu Office: Serrin E358 Phone: 848 445 9054 E-mail: duiliu@physics.rutgers.edu
Newton s Laws and Friction Friction is a Doubled Edge Sword
Newton s Laws and Friction Friction is a Doubled Edge Sword Description This lesson introduces GEARS users to three related concepts, these are: 1.) The nature of forces 2.) Newton s laws of motion 3.)
CE261 ENGINEERING MECHANICS - DYNAMICS
CE1 ENGINEERING MECHANICS - DYNAMICS Instructor JORGE A. RAMÍREZ, PH.D. ASSOCIATE PROFESSOR Water Resources, Hydrologic and Environmental Sciences Division Civil Engineering Department A Engineering Bldg.
CHAPTER 1 INTRODUCTION
CHAPTER 1 INTRODUCTION DEFINITION OF MECHANICS Mechanics may be defined as the physical science which describes and predicts the conditions of rest or motion of bodies under the action of force systems.
Physics: Principles with Applications, 6 th edition
Lecture PowerPoints Chapter 1 Physics: Principles with Applications, 6 th edition Giancoli 2005 Pearson Prentice Hall This work is protected by United States copyright laws and is provided solely for the
Chapter 4. The Laws of Motion
Chapter 4 The Laws of Motion Classical Mechanics Describes the relationship between the motion of objects in our everyday world and the forces acting on them Conditions when Classical Mechanics does not
Phys101 Lecture 1-1. Phys101 Lecture 1
Phys101 Lecture 1 Phys101 Lecture 1-1 Course Info Instructor Michael Chen http://www.sfu.ca/~mxchen Course webpage Office hours (P9442): Mon 12:30-1:20; Tue 11:30-12:20. Webct (the gradebook - check your
Physical Science and Engineering. Course Information. Course Number: ME 100
Physical Science and Engineering Course Number: ME 100 Course Title: Course Information Basic Principles of Mechanics Academic Semester: Fall Academic Year: 2016-2017 Semester Start Date: 8/21/2016 Semester
Reading Quiz. How many years of physics have you had?
Reading Quiz How many years of physics have you had? 1) None 2) One 3) Two or more Physics 201 http://people.virginia.edu/ nl8n/201/ PHYS 201 homepage.htm Go to Toolkit under Materials after every lecture
CENTRAL TEXAS COLLEGE SYLLABUS FOR ENGR 2301 Engineering Mechanics - Statics. Semester Hours Credit: 3
CENTRAL TEXAS COLLEGE SYLLABUS FOR ENGR 2301 Engineering Mechanics - Statics Semester Hours Credit: 3 I. INTRODUCTION A. ENGR 2301, Engineering Mechanics Statics, is a three-semester hour course that is
Lecture PowerPoints. Chapter 8 Physics: Principles with Applications, 6 th edition Giancoli
Lecture PowerPoints Chapter 8 Physics: Principles with Applications, 6 th edition Giancoli 2005 Pearson Prentice Hall This work is protected by United States copyright laws and is provided solely for the
FORCES AND MOTION UNIT TEST. Multiple Choice: Draw a Circle Completely around the ONE BEST answer.
Name: Date: Period: FORCES AND MOTION UNIT TEST Multiple Choice: Draw a Circle Completely around the ONE BEST answer. 1. A force acting on an object does no work if a. a machine is used to move the object.
CE 221: MECHANICS OF SOLIDS I CHAPTER 1: STRESS. Dr. Krisada Chaiyasarn Department of Civil Engineering, Faculty of Engineering Thammasat university
CE 221: MECHANICS OF SOLIDS I CHAPTER 1: STRESS By Dr. Krisada Chaiyasarn Department of Civil Engineering, Faculty of Engineering Thammasat university Agenda Introduction to your lecturer Introduction
AP PHYSICS 1 Learning Objectives Arranged Topically
AP PHYSICS 1 Learning Objectives Arranged Topically with o Big Ideas o Enduring Understandings o Essential Knowledges o Learning Objectives o Science Practices o Correlation to Knight Textbook Chapters
Physics 111. Lecture 22 (Walker: ) Torque Rotational Dynamics Static Equilibrium Oct. 28, 2009
Physics 111 Lecture 22 (Walker: 11.1-3) Torque Rotational Dynamics Static Equilibrium Oct. 28, 2009 Lecture 22 1/26 Torque (τ) We define a quantity called torque which is a measure of twisting effort.
Integrated Physics & Chemistry A
Integrated Physics & Chemistry A Credit by Exam This Credit by Exam can help you prepare for the exam by giving you an idea of what you need to study, review, and learn. To succeed, you should be thoroughly
2018 SPRING PHYS 8011 Classical mechanics I (as of Apr. 19/2018) The course syllabus is a general plan for the course; deviations announced to the class by the instructor may be necessary. A FRIENDLY REMINDER:
1.1 WHAT IS MECHANICS?
H1 1 C H A P T E R Introduction 1 Chapter 1 Introduction 1.1 What Is Mechanics? 1.2 Fundamental Concepts and Principles 1.3 Systems of Units 1.4 Conversion from One System of Units to Another 1.5 Method