CE 6701 Structural Dynamics and Earthquake Engineering Dr. P. Venkateswara Rao

Size: px
Start display at page:

Download "CE 6701 Structural Dynamics and Earthquake Engineering Dr. P. Venkateswara Rao"

Transcription

1 CE 6701 Structural Dynamics and Earthquake Engineering Dr. P. Venkateswara Rao Associate Professor Dept. of Civil Engineering SVCE, Sriperumbudur

2 Difference between static loading and dynamic loading Degree of freedom Idealisation of structure as single degree of freedom system Formulation of Equations of motion of SDOF system D Alemberts principles Effect of damping Free and forced vibration of damped and undamped structures Response to harmonic and periodic forces. Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 2

3 Unit II Multiple Degree of Freedom System Two degree of freedom system Modes of vibrations Formulation of equations of motion of multi degree of freedom (MDOF) system Eigen values and Eigen vectors Response to free and forced vibrations Damped and undamped MDOF system Modal superposition methods. Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 3

4 Unit III Elements of Seismology Elements of Engineering Seismology Causes of Earthquake Plate Tectonic theory Elastic rebound Theory Characteristic of earthquake Estimation of earthquake parameters Magnitude and intensity of earthquakes Spectral Acceleration. Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 4

5 Unit IV Response of Structures to Earthquake Effect of earthquake on different type of structures Behaviour of Reinforced Cement Concrete, Steel and Prestressed Concrete Structure under earthquake loading Pinching effect Bouchinger Effects Evaluation of earthquake forces as per IS: Response Spectra Lessons learnt from past earthquakes. Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 5

6 Unit V Design Methodology Causes of damage Planning considerations / Architectural concepts as per IS: Guidelines for Earthquake resistant design Earthquake resistant design for masonry and Reinforced Cement Concrete buildings Later load analysis Design and detailing as per IS: Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 6

7 References 1. Chopra, A.K., Dynamics of Structures Theory and Applications to Earthquake Engineering, 4th Edition, Pearson Education, Agarwal. P and Shrikhande. M., "Earthquake Resistant Design of Structures", Prentice Hall of India Pvt. Ltd Paz, M. and Leigh.W. Structural Dynamics Theory & Computation, 4th Edition, CBS Publishers & Distributors, Shahdara, Delhi, Damodarasamy, S.R. and Kavitha, S. Basics of Structural dynamics and Aseismic design, PHI Learning Pvt. Ltd., 2012 Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 7

8 References Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 8

9 Vibration: Unit I Theory of Vibrations Motion of a particle or a body or a system of concentrated bodies having been displaced from a position of equilibrium, appearing as an oscillation. Vibration in structural systems may result from environmental sources such as wind, earthquakes and waterways. Earthquakes are most important due to enormous potential for damage to structures and loss of life. On an average every year around 10, 000 people die worldwide due to earthquakes. Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 9

10 Vibration: Unit I Theory of Vibrations Study of repetitive motion of objects relative to a stationary frame of reference or equilibrium position. Vibrations can occur in many directions and results in interaction of many objects. Motion of vibrating system is governed by the law of mechanics, and in particular by Newton s second law of motion (F=ma). Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 10

11 Basic concepts of Vibration: Bodies having mass and elasticity are capable to vibrate. When body particles are displaced by the application of external force, the internal forces in the form of elastic energy present in the body, try to bring it to its original position. At equilibrium position, whole of the elastic energy is converted into kinetic energy and the body continuous to move in in the opposite direction. Whole K.E. is converted into elastic or strain energy and inturn body returns to equilibrium position. This way, vibration motion is repeated continuously and interchange of energy takes place. And hence, any motion repeats itself after an interval of time is called vibration or oscillation. Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 11

12 Dynamic loading: Unit I Theory of Vibrations Dynamics: Study of forces and motions with time dependency. Dynamic load: Load magnitude, direction and position changes with time. Structural response to dynamic loading can be done by two methods: i) Deterministic analysis : Structural response i.e. displacement, acceleration, velocity, stress are known as a function of time. Ii) Non-deterministic analysis : Time variation of of vibration is not completely known. Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 12

13 Comparison of static loading and dynamic loading: i) In static problem: Load is constant with time. W Ex: Weight of a bridge span on bridge pilings. In dynamic problem: Loading and its response varies with time. W (t) Ex: A truck moving across the same bridge span exerts a dynamic load on the pilings. Inertia forces Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 13

14 Comparison of static loading and dynamic loading: ii) In static problem: Response due to static loading is displacement only. W y In dynamic problem: Response due to dynamic loading is displacement, velocity and acceleration. W (t) Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 14

15 Comparison of static loading and dynamic loading: iii) In static problem: Solution of static problem is only one. W y In dynamic problem: Solutions of dynamic problem are infinite and are time dependent. W (t) Dynamic analysis is more complex and time consuming than static analysis Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 15

16 Comparison of static loading and dynamic loading: iv) In static problem: Response calculation is done by static equilibrium. W y In dynamic problem: Response not only depends on load but also depend on inertia forces which oppose the accelerations producing them. Inertia forces are most W (t) important characteristics of a structural dynamic problem. Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 16

17 Causes of dynamic effects: Natural and manmade sources may influence the dynamic effect in the structure. The most common causes are as follows: i) Initial conditions: Initial conditions such as velocity and displacement produce dynamic effect in the system. Ex: Consider a lift moving up or down with an initial velocity. When the lift is suddenly stopped, the cabin begin to vibrate up and down since it posses initial velocity. ii) Applied forces: Some times vibration in the system is produced due to application of external forces. Ex: i) A building subjected to bomb blast or wind forces ii) Machine foundation. iii) Support motions : Structures are often subjected to vibration due to influence of support motions. Ex: Earthquake motion. Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 17

18 Degrees of freedom: Number of coordinates necessary to specify the position or geometry of mass point at any instant during its vibration. All real structures possess infinite number of dynamic degrees of freedom. Hence infinite number of coordinates are necessary to specify the position of the structure completely at any instant of time. Each degree of freedom is having corresponding natural frequency. Therefore, a structure possesses as many natural frequencies as it has the degrees of freedom. For each natural frequency, the structure has its own way of vibration. The vibrating shape is known as characteristic shape or mode of vibration. Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 18

19 Degrees of freedom: Consider a block as shown in figure that is free to move in 3- dimensional space, which may move without rotation in each of the three directions X, Y, Z. These are called the three degrees of translation. The block may also rotate about its own axes, these are called the three degrees of rotation. Thus to define the position of the block in space, we need to define six coordinates, that is three for translation and three for rotation. Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 19

20 Degrees of freedom: Unit I Theory of Vibrations Depending on the independent coordinates required to describe the motion, the vibratory system is divided into the following categories. (i) Single degree of freedom system (SDOF system) (ii) Multiple degree of freedom system (iii) Continuous system. If a single coordinate is sufficient to define the position or geometry of the mass of the system at any instant of time is called single or one degree of freedom system. Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 20

21 Degrees of freedom: Example for SDOF: Unit I Theory of Vibrations k 1 m x x Spring mass system Building frame Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 21

22 Degrees of freedom: Unit I Theory of Vibrations If more than one independent coordinate is required to completely specify the position or geometry of different masses of the system at any instant of time, is called multiple degrees of freedom system. Example for MDOF system: x 1 x 2 k 1 k 2 m 1 m 2 Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 22

23 Degrees of freedom: Unit I Theory of Vibrations If the mass of a system may be considered to be distributed over its entire length as shown in figure, in which the mass is considered to have infinite degrees of freedom, it is referred to as a continuous system. It is also known as distributed system. Example for continuous system: x 3 x 3 x 2 x 1 x 3 Cantilver beam with infinite number of degrees of freedom Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 23

24 F(t) Unit I Theory of Vibrations Mathematical modelling of an SDOF system: K Portal frame x To understand the dynamic behaviour of structure, it is necessary to develop their models under dynamic loads such as earthqukes, wind, blasts etc. Assumptions to develop mathematical model: Total mass is assumed to act at slab level, since mass of columns are less and ignored. The beam/slab is assumed as infinitely rigid, so that the stiffness of the structure is provided by the columns, i.e. flexibility of slab/beam is ignored. Since beams are built monolithically within the columns, the beam column joint can be assumed as rigid as without any rotations at joint. Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 24

25 F(t) Unit I Theory of Vibrations Mathematical modelling of an SDOF system: K Portal frame x The possibility of lateral displacement is due to rigid beam/slab only. The model resulting from the above mentioned assumptions is called as shear building model. c k m x Inertia force, F i = mx Damping force, F D = cx Spring force, F s =kx m FBD F(t) Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 25

26 F(t) Unit I Theory of Vibrations Mathematical modelling of an SDOF system: x Inertia force, F i = mx Damping force, F D = cx Spring force, F s =kx m FBD F(t) m =mass of slab and beam. Energy is stored by mass m in the form of kinetic energy. k represents combined stiffness of two columns for lateral deformation that is elastic restoring force and it stores the potential energy (internal strain energy ) due to columns. Dashpot having damping coefficient c represents the energy dissipation, i.e. frictional characteristics and energy losses of the frame. An execution force F(t) representing the external lateral force. Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 26

27 F(t) Unit I Theory of Vibrations Mathematical modelling of an SDOF system: x Inertia force, F i = mx Damping force, F D = cx Spring force, F s =kx m FBD F(t) Passive (inactive) elements = mass, spring, damper Active element = excitation element, F(t) Since the above dynamic system is divided into independent discrete elements, this model is known as lumped parameter model. Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 27

28 F(t) Unit I Theory of Vibrations Mathematical modelling of an SDOF system: x Inertia force, F i = mx Damping force, F D = cx Spring force, F s =kx m FBD F(t) The elements to determine the dynamic behaviour: i) the inertia force, F i = mx Ii) the restoring force or spring force, F s =kx iii) the damping force, F D = cx iv) the exciting force, F(t) Considering the equilibrium of all forces in X- direction, the govrning equation of motion for the SDOF is, mx + cx + kx = F(t) Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 28

29 Free vibration of undamped SDOF system: x m k Inertia force, F i = mx Spring force, F s =kx m FBD Considering the equilibrium of all forces in X- direction, the governing equation of motion for the SDOF is, F i + F s = 0 mx + kx = 0 Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 29

30 Derivation of equation of motion: Differential equation describing the motion is known as equation of motion. Methods to derive the equation of motion: i) Simple Harmonic Motion method ii) Newton s method iii) Energy method iv) Rayleigh s method v) D Alembert s principle Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 30

31 i). Simple Harmonic motion method: If the acceleration of a particle in a rectilinear motion is always proportional to the distance of the particle from a fixed point on the path and is directed towards the fixed point, then the particle is said to be in SHM. SHM is the simplest form of periodic motion. In differential equation form, SHM is represented as x x (1) Where x is the rectilinear displacement and x is acceleration ( d2 x dt 2) Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 31

32 i). Simple Harmonic motion method: x x (1) The negative sign in Eq.(1) indicates the direction of motion of a particle towards a fixed point which is opposite to the direction of displacement. Let the constant proportionality be ω n 2 which is an unknown parameter. Now Eq.(1) can be rewritten as, x = ω n 2 x x + ω n 2 x = 0 2 This is known as equation of motion and is second order linear differential equation. The constant ω n is yet to be determined by the analysis. Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 32

33 ii). Newton s second law of motion: The equation of motion is just another form of Newton s second law of motion. The rate of change of momentum is proportional to the impressed forces and takes place in the direction in which the force acts. Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 33

34 ii). Newton s second law of motion: Consider a spring mass system of figure which is assumed to move only along the vertical direction. It has only one degree of freedom, because its motion is described by a single coordinate x. = Static deflection m k m W m Static equilibrium position Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 34 x x k ( + x) m W x x

35 ii). Newton s second law of motion: A massless spring of constant stiffness k is shown in Figure. k = W, W = k From the equilibrium position, the load W is pulled down a little by some force and then pulling force is removed. = Static deflection m x k m W m Static equilibrium position x k ( + x) m x x W Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 35

36 ii). Newton s second law of motion: The load W will continue to execute vibration up and down which is called free vibration. Restoring force in X- direction= W k( + x) = k k kx = kx = Static deflection m x k m W m Static equilibrium position x k ( + x) m x x W Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 36

37 ii). Newton s second law of motion: According to Newton s second law, mx = kx mx + kx = 0 x + k x = 0 3 m Compared with Eq.(2) i.e., x + ω 2 n x = 0 2 ω n 2 = k m = Static deflection m x k m W m Static equilibrium position x ω n = k m k ( + x) m x x W Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 37

38 iii). Energy method: Assumption: System is to be conservative one. Conservative system: Total sum of energy is constant at all time. For an undamped system: since there is no friction or damping force, the total energy of the system is partly potential and partly kinetic. K. E + P. E. = constant. The time rate of change of total energy will be zero. d k. E. +P. E. = 0 dt Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 38

39 iii). Energy method: k. E. = 1 2 mv2 = 1 2 mx 2 P. E. = 1 2 kx2 d dt 1 2 mx kx2 = 0 1 m2x x + 1 k2xx = mx + kx = 0 Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 39

40 iv). Rayleigh s method: Assumptions: (1) Maximum K.E. at the equilibrium position is equal to the maximum potential energy at the extreme position. (2). The motion is assumed to be SHM, then x = A sin ω n t Where x is the displacement of the system from its mean position after time t. A is the maximum displacement of the system from equilibrium position to extreme position. Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 40

41 iv). Rayleigh s method: x = A sin ω n t x is maximum when sin ω n t=1 x max = A x = ω n A cos ω nt Velocity x is maximum when cos ω n t = 1 x max = ω n A Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 41

42 iv). Rayleigh s method: So maximum K.E. at the equilibrium position= 1 2 mx max 2 = 1 2 m ω na 2 Maximum P.E. at the extreme position= 1 2 kx max m ω na 2 == 1 k A 2 2 = 1 2 k A 2 ω n 2 = k m ω n = k m Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 42

43 iv). D Alembert s method: To find the solution of a dynamic problem by using the methods of statics. According to Newton s second law, F = ma F ma = 0 This is in the form of an equation of motion of force equilibrium in which sum of a number of force terms equals zero. Hence, if an imaginary force which is equal to ma were applied to the system in the direction opposite to the acceleration, the system could then be considered to be in equilibrium under the action of real force F and the imaginary force ma. The imaginary force ma is known as inertia force and the position of equilibrium is called dynamic equilibrium. Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 43

44 iv). D Alembert s method: D Alemberts principle states that a system may be in dynamic equilibrium by adding to the external forces, an imaginary force, which is commonly known as the inertia force. According to the principle, the transformation of a problem in dynamics may be reduced to one in statics. Consider a spring-mass system in the following Figure. m k x Inertia force, F i = mx Spring force, F s =kx m Spring mass system Dynamic equilibrium Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 44

45 iv). D Alembert s method: Using D Alembert s principle, to bring the body to a dynamic equilibrium position, the inertia force mx is to be added in the direction opposite to the direction of motion. Equilibrium equation is F x = 0 mx kx = 0 mx + kx = 0 mx + kx = 0 x + k m x = 0 ω n 2 = k m ω n = k m Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 45

46 Solution of the equation of motion: The governing differential equation of motion is mx + kx = 0 It is in the form of homogeneous second order linear equation. There are five different solutions for the above equation of motion. 1. x = A cos ω n t 2. x = B sin ω n t 3. x = A cos ω n t + B sin ω n t 4. x = A sin(ω n t + ) 5. x = A cos(ω n t + ) Where A and B are constants depending on their initial condition of the motion. Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 46

47 Solution of the equation of motion: Solution No.1: x = A cos ω n t (1) To determine the constant A, let us use the initial condition by assuming that at time t=0, the displacement x = x 0. Substituting this in the above equation (1), we get x 0 = A cos(ω n 0) x 0 = A Hence the solution, x = x 0 cos ω n t Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 47

48 Solution of the equation of motion: Solution No.2: x = B sin ω n t (2) To determine the constant B, let us use the initial condition by assuming that (i) at time t=0, the displacement x = x 0. (ii) At time t=0, x = x 0 Differentiating equation (2) with respect to time, x = Bω n cos ω n t Applying initial conditions, x 0 = B ω n. B = x 0 ω n Substituting in equation (2), x = x 0 ω n sin ω n t Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 48

49 Solution of the equation of motion: Solution No.3: x = A cos ω n t + B sin ω n t (3) The superposition of the above two solutions is also a solution. The general solution for this second order differential equation is x = x 0 cos ω n t + x 0 ω n sin ω n t Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 49

50 Solution of the equation of motion: Solution No.4: x = A sin(ω n t + ) (4) By expanding sine term x = A sin ω n t cos + A cos ω n t sin (4a) But the general solution is x = x 0 cos ω n t + x 0 ω n sin ω n t By comparing Eq.(4a) with general solution, i.e. comparing coefficient of cos ω n t, x 0 = A sin (5) Comparing coefficient of sin ω n t, x 0 ω n = A cos (6) Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 50

51 Solution of the equation of motion: Solution No.4: x 0 = A sin (5) x 0 ω n = A cos (6) Squaring and adding Eq.(5) and Eq.(6), A 2 sin 2 + A 2 cos 2 = x x 0 2 A = x x 0 2 ω n 2 ω n 2 Dividing Eq.(5) and Eq.(6), A sin = x 0 A cos x 0 ωn Hence the phase angle, = tan 1 x 0ω n x 0 Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 51

52 Solution of the equation of motion: Solution No.5: x = A cos(ω n t + ) (7) By expanding cosine term, we get x = A cos ω n t cos + A sin ω n t sin (7a) But the general solution is x = x 0 cos ω n t + x 0 ω n sin ω n t By comparing Eq.(7a) with general solution, we get x 0 = A cos (8) x 0 ω n = A sin (9) By squaring and adding Eqs. (8) and (9), we get x x 0 2 ω n 2 = A2 cos 2 + A 2 sin 2 Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 52

53 Solution of the equation of motion: Solution No.5: x x 0 2 ω n 2 = A2 cos 2 + A 2 sin 2 A = x x 0 2 ω n 2 Dividing Eq.(9) and Eq.(8), Phase angle, = tan 1 x 0 A sin = ωn A cos x 0 x 0 ω n x 0 Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 53

54 Damped free vibration of SDOF system: Introduction: Without damping force or frictional force the system vibrates indefinitely with a constant amplitude at its natural frequency. But in reality the vibration without decreasing amplitude is never realized. Frictional forces (or) damping forces are always present in any physical system while undergoing motion. The presence of damping forces or frictional forces, form a mechanism through which the mechanical energy of the system (kinetic energy or potential energy) is transformed to other form of energy such as heat energy. This energy transformation mechanism is called a dissipation energy. This is quite complex in nature. Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 54

55 Damped free vibration of SDOF system: What is damping? A phenomenon in which the energy of the system is gradually reduced or the amplitude of the vibration goes on decreasing and finally the vibration of the system is completely eliminated and the system is brought to rest is known as damping. The decreasing rate of amplitude depends upon the amount of damping. The damping is useful to control the amplitude of vibration. Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 55

56 Damped free vibration of SDOF system: Types (or) Nature of damping : Mainly 5types of damping 1. Viscous damping 2. Coulomb damping 3. Structural damping 4. Active damping (or) Negative damping 5. Passive damping Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 56

57 Damped free vibration of SDOF system: 1. Viscous Damping: When a system is made to vibrate in a surrounding viscous medium that is under the control of highly viscous fluid, the damping is called viscous damping. This type of damping is achieved by means of device called hydraulic dashpot. V The main components of viscous damper or dashpot are cylinder, piston and viscous fluid as shown in Figure. Fluid mechanics concepts are to be used here. Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 57

58 Damped free vibration of SDOF system: 1. Viscous Damping: Let us consider that the two plates are separated by fluid film of thickness t as shown in Figure. F t The upper plate is allowed to move parallel to the fixed plate with a velocity x. V The force F required for maintaining this velocity x of the plate is given by F = μa t x (1) = cx c=damping coefficient (N-s/m) Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 58

59 Damped free vibration of SDOF system: 1. Viscous Damping: Viscous damping is a method of converting mechanical vibrational energy of a body into heat energy, in which a piston is attached to the body and is arranged to move through liquid in a cylinder that is attached to a support. Shock absorber is the best example of the viscous damping. Viscous damping is largely used for system modeling since it is linear. V F t Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 59

60 Damped free vibration of SDOF system: 1. Equation of motion for viscous damping: c k m Viscous damping oscillator x Inertia force, F i = mx Damping force, F D = cx Spring force, F s =kx m F. B.D. From FBD, the governing differential equation of motion is, mx + cx + kx = 0 (2) Assuming the solution may be in the form of x = e λt Where λ is a constant to be determined. This exponential function leads to algebraic equation instead of a differential equation. Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 60

61 Damped free vibration of SDOF system: 1. Equation of motion for viscous damping: mx + cx + kx = 0 (2) c m x Inertia force, F i = mx Damping force, F D = cx Spring force, F s =kx k x = e λt x = λe λt x = λ 2 e λt Substituting the values of x, x, x in equation (2) we get, mλ 2 e λt + c λe λt + ke λt = 0 mλ 2 + cλ+k e λt = 0 The non-trivial solution is mλ 2 + cλ+k=0 λ 2 + c m λ+ k m = 0 Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 61 m

62 Coulomb damping: It was named because Charles Augustin de Coulomb carried on research in mechanics. In this damping energy is absorbed constantly through sliding friction, which is developed by relative motion of the two surfaces that slide against each other. Coulomb damping absorbs energy with friction, which converts that kinetic energy into thermal energy or heat. Static and kinetic friction occur in a vibrating system undergoing Coulomb damping. Static friction occurs when two bodies are stationary or undergoing no relative motion. Frictional force, F s = μ s N μ s = coefficient of static friction. Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 62

63 Coulomb damping: Kinetic friction occurs when the two bodies are undergoing relative motion and they are sliding against each other. Frictional force, F k = μ k N μ k = coefficient of dynamic friction EOM for right to left motion, mx = kx + F, for x < 0 EOM for left to right motion, mx = kx F, for x > 0 F Solution for left motion, x = A cos ω n t + B sin ω n t + k F Solution for right motion, x = C cos ω n t + D sin ω n t k Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 63

64 Coulomb damping for first half cycle (0 t T/2): Let us consider the movement of the mass to the left in a Coulomb damping system as shown in figure. The governing differential equation is mx = kx + F mx + kx = F (1) x ω 2 + x = F n k The solution of the above equation can be written as F x = A cos ω n t + B sin ω n t + k Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 64

65 Coulomb damping for first half cycle (0 t T/2): F x = A cos ω n t + B sin ω n t + (2) k x = x c + x p Where x c = A cos ω n t + B sin ω n t = complimentary sulution x p = F k = Partcular integral Where ω n = k m Let us assume the initial condition to determine the constants A and B (i) At t=0; x=x 0 (ii) At t=0; x = 0 x = Aω n sin ω n t + Bω n cos ω n t Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 65

66 Coulomb damping for first half cycle (0 t T/2): x = Aω n sin ω n t + Bω n cos ω n t (3) Applying initial condition (ii) i.e., At t=0; x = 0 in the above equation 0 = Bω n Since ω n 0 B = 0 Applying initial condition (i) i.e., at t=0;x = x 0 x 0 = A + F k A = x 0 F k Hence Equation (2) can be written as x = (x 0 F k ) cos ω F nt +, 0 t T/2 k This solution holds good for half cycle only. Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 66

67 Coulomb damping for first half cycle (0 t T/2): x = (x 0 F k ) cos ω nt + F k, 0 t T/2 (4) We know that, T = 2π ω n For half cycle, T = π ω n When t= π ω n, half cycle is completed. So displacement for half the cycle can be obtained from Eq.(4). t = π ω n ω n t = π Substituting the value of ω n t in Eq.(4), x = (x 0 F k )cosπ + x = (x 0 F k )( 1) + F k F k Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 67

68 Coulomb damping for first half cycle (0 t T/2): x = (x 0 F k )( 1) + F k x = x 0 2 F k This is the amplitude for the left extreme of the body. From this equation it is clear that the initial displacement is reduced by 2F/k. Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 68

69 Coulomb damping for second half cycle (T/2 t T): Let us consider the movement of the mass to the right in a Coulomb damping system as shown in figure. The governing differential equation is mx = kx F mx + kx = F (5) x ω 2 + x = F n k The solution of the above equation can be written as F x = C cos ω n t + D sin ω n t k Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 69

70 Coulomb damping for second half cycle (T/2 t T): F x = C cos ω n t + D sin ω n t (6) k x = x c + x p Where x c = C cos ω n t + D sin ω n t = complimentary sulution x p = F k = Partcular integral Where ω n = k m Let us assume the initial condition to determine the constants C and D (i) At t=0; x=x 0 (ii) At t=0; x = 0 x = Cω n sin ω n t + Dω n cos ω n t Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 70

71 Coulomb damping for second half cycle (T/2 t T): x = Cω n sin ω n t + Dω n cos ω n t (7) Applying initial condition (ii) i.e., At t=0; x = 0 in the above equation 0 = Dω n Since ω n 0 D = 0 Applying initial condition (i) i.e., at t= π ω n ;x = x F k C = x 0 3 F k Hence Equation (2) can be written as x = (x 0 3 F k ) cos ω F nt, T/2 t T k This solution holds good for second half cycle only. Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 71

72 Coulomb damping for second half cycle (T/2 t T): x = (x 0 3 F k ) cos ω nt We know that, T = 2π ω n F k, T/2 t T (8) When t= 2π, second half cycle is completed. So displacement for the ω n second half the cycle can be obtained from Eq.(8). t = 2π ω n ω n t varies from π to 2π Substituting the value of ω n t in Eq.(4), x = (x 0 3 F k )cos2π x = (x 0 4 F k ) F k Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 72

73 Coulomb damping for second half cycle (T/2 t T): x = x 0 2 F k x = x 0 4 F k In the first half cycle the initial displacement is reduced by 2F/k. In the second half cycle when the body moves to the right, the initial displacement will be reduced by 2F/k. So in one complete cycle, the amplitude reduces by 4F/k. But the natural frequency of the system remains unchanged in coulomb damping. Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 73

74 Coulomb damping for second half cycle (T/2 t T): Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 74

75 Example 1: Unit I Theory of Vibrations A cantilever beam AB of length L is attached to a spring k and mass M as shown in Figure. (i) form the equation of motion and (ii) Find an expression for the frequency of motion. m L k Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 75

76 Solution: Unit I Theory of Vibrations Stiffness due to applied mass M is k b = M = 3EI L 3 L m k This stiffness is parallel to k. Equivalent spring stiffness, k e = k b + k = 3EI L 3 3EI + kl3 = L 3 The differential equation of motion is, mx = k e x + k Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 76

77 Solution: Unit I Theory of Vibrations mx = k e x mx + k e x = 0 3EI + kl3 mx + L 3 x = 0 x + 3EI + kl3 ml 3 x = 0 L m k The frequency of vibration, f = 1 2π k e m f = 1 2π kl 3 + 3EI ml 3 Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 77

78 Example 2: Unit I Theory of Vibrations Find the natural frequency of the system as shown in Figure. Take k 1 = k 2 = 2000 N/m, k 3 = 3000 N and m= 10 kg. m k 1 k 2 m=10 kg k 3 Dr. P.Venkateswara Rao, Associate Professor, SVCE,Sriperumbudur 78

EQUIVALENT SINGLE-DEGREE-OF-FREEDOM SYSTEM AND FREE VIBRATION

EQUIVALENT SINGLE-DEGREE-OF-FREEDOM SYSTEM AND FREE VIBRATION 1 EQUIVALENT SINGLE-DEGREE-OF-FREEDOM SYSTEM AND FREE VIBRATION The course on Mechanical Vibration is an important part of the Mechanical Engineering undergraduate curriculum. It is necessary for the development

More information

The student will experimentally determine the parameters to represent the behavior of a damped oscillatory system of one degree of freedom.

The student will experimentally determine the parameters to represent the behavior of a damped oscillatory system of one degree of freedom. Practice 3 NAME STUDENT ID LAB GROUP PROFESSOR INSTRUCTOR Vibrations of systems of one degree of freedom with damping QUIZ 10% PARTICIPATION & PRESENTATION 5% INVESTIGATION 10% DESIGN PROBLEM 15% CALCULATIONS

More information

Introduction to structural dynamics

Introduction to structural dynamics Introduction to structural dynamics p n m n u n p n-1 p 3... m n-1 m 3... u n-1 u 3 k 1 c 1 u 1 u 2 k 2 m p 1 1 c 2 m2 p 2 k n c n m n u n p n m 2 p 2 u 2 m 1 p 1 u 1 Static vs dynamic analysis Static

More information

STRUCTURAL DYNAMICS BASICS:

STRUCTURAL DYNAMICS BASICS: BASICS: STRUCTURAL DYNAMICS Real-life structures are subjected to loads which vary with time Except self weight of the structure, all other loads vary with time In many cases, this variation of the load

More information

Introduction to Mechanical Vibration

Introduction to Mechanical Vibration 2103433 Introduction to Mechanical Vibration Nopdanai Ajavakom (NAV) 1 Course Topics Introduction to Vibration What is vibration? Basic concepts of vibration Modeling Linearization Single-Degree-of-Freedom

More information

Dr.Vinod Hosur, Professor, Civil Engg.Dept., Gogte Institute of Technology, Belgaum

Dr.Vinod Hosur, Professor, Civil Engg.Dept., Gogte Institute of Technology, Belgaum STRUCTURAL DYNAMICS Dr.Vinod Hosur, Professor, Civil Engg.Dept., Gogte Institute of Technology, Belgaum Overview of Structural Dynamics Structure Members, joints, strength, stiffness, ductility Structure

More information

LANMARK UNIVERSITY OMU-ARAN, KWARA STATE DEPARTMENT OF MECHANICAL ENGINEERING COURSE: MECHANICS OF MACHINE (MCE 322). LECTURER: ENGR.

LANMARK UNIVERSITY OMU-ARAN, KWARA STATE DEPARTMENT OF MECHANICAL ENGINEERING COURSE: MECHANICS OF MACHINE (MCE 322). LECTURER: ENGR. LANMARK UNIVERSITY OMU-ARAN, KWARA STATE DEPARTMENT OF MECHANICAL ENGINEERING COURSE: MECHANICS OF MACHINE (MCE 322). LECTURER: ENGR. IBIKUNLE ROTIMI ADEDAYO SIMPLE HARMONIC MOTION. Introduction Consider

More information

Structural Dynamics Prof. P. Banerji Department of Civil Engineering Indian Institute of Technology, Bombay. Lecture - 1 Introduction

Structural Dynamics Prof. P. Banerji Department of Civil Engineering Indian Institute of Technology, Bombay. Lecture - 1 Introduction Structural Dynamics Prof. P. Banerji Department of Civil Engineering Indian Institute of Technology, Bombay Lecture - 1 Introduction Hello, I am Pradipta Banerji from the department of civil engineering,

More information

Introduction to Vibration. Professor Mike Brennan

Introduction to Vibration. Professor Mike Brennan Introduction to Vibration Professor Mie Brennan Introduction to Vibration Nature of vibration of mechanical systems Free and forced vibrations Frequency response functions Fundamentals For free vibration

More information

Translational Mechanical Systems

Translational Mechanical Systems Translational Mechanical Systems Basic (Idealized) Modeling Elements Interconnection Relationships -Physical Laws Derive Equation of Motion (EOM) - SDOF Energy Transfer Series and Parallel Connections

More information

Structural Dynamics Lecture 4. Outline of Lecture 4. Multi-Degree-of-Freedom Systems. Formulation of Equations of Motions. Undamped Eigenvibrations.

Structural Dynamics Lecture 4. Outline of Lecture 4. Multi-Degree-of-Freedom Systems. Formulation of Equations of Motions. Undamped Eigenvibrations. Outline of Multi-Degree-of-Freedom Systems Formulation of Equations of Motions. Newton s 2 nd Law Applied to Free Masses. D Alembert s Principle. Basic Equations of Motion for Forced Vibrations of Linear

More information

Some Aspects of Structural Dynamics

Some Aspects of Structural Dynamics Appendix B Some Aspects of Structural Dynamics This Appendix deals with some aspects of the dynamic behavior of SDOF and MDOF. It starts with the formulation of the equation of motion of SDOF systems.

More information

Dynamics of structures

Dynamics of structures Dynamics of structures 2.Vibrations: single degree of freedom system Arnaud Deraemaeker (aderaema@ulb.ac.be) 1 Outline of the chapter *One degree of freedom systems in real life Hypothesis Examples *Response

More information

Mathematical Modeling and response analysis of mechanical systems are the subjects of this chapter.

Mathematical Modeling and response analysis of mechanical systems are the subjects of this chapter. Chapter 3 Mechanical Systems A. Bazoune 3.1 INRODUCION Mathematical Modeling and response analysis of mechanical systems are the subjects of this chapter. 3. MECHANICAL ELEMENS Any mechanical system consists

More information

Vibration Control Prof. Dr. S. P. Harsha Department of Mechanical & Industrial Engineering Indian Institute of Technology, Roorkee

Vibration Control Prof. Dr. S. P. Harsha Department of Mechanical & Industrial Engineering Indian Institute of Technology, Roorkee Vibration Control Prof. Dr. S. P. Harsha Department of Mechanical & Industrial Engineering Indian Institute of Technology, Roorkee Module - 1 Review of Basics of Mechanical Vibrations Lecture - 2 Introduction

More information

Step 1: Mathematical Modeling

Step 1: Mathematical Modeling 083 Mechanical Vibrations Lesson Vibration Analysis Procedure The analysis of a vibrating system usually involves four steps: mathematical modeling derivation of the governing uations solution of the uations

More information

Response Analysis for Multi Support Earthquake Excitation

Response Analysis for Multi Support Earthquake Excitation Chapter 5 Response Analysis for Multi Support Earthquake Excitation 5.1 Introduction It is very important to perform the dynamic analysis for the structure subjected to random/dynamic loadings. The dynamic

More information

TOPIC E: OSCILLATIONS SPRING 2019

TOPIC E: OSCILLATIONS SPRING 2019 TOPIC E: OSCILLATIONS SPRING 2019 1. Introduction 1.1 Overview 1.2 Degrees of freedom 1.3 Simple harmonic motion 2. Undamped free oscillation 2.1 Generalised mass-spring system: simple harmonic motion

More information

VTU-NPTEL-NMEICT Project

VTU-NPTEL-NMEICT Project MODULE-II --- SINGLE DOF FREE S VTU-NPTEL-NMEICT Project Progress Report The Project on Development of Remaining Three Quadrants to NPTEL Phase-I under grant in aid NMEICT, MHRD, New Delhi SME Name : Course

More information

A Guide to linear dynamic analysis with Damping

A Guide to linear dynamic analysis with Damping A Guide to linear dynamic analysis with Damping This guide starts from the applications of linear dynamic response and its role in FEA simulation. Fundamental concepts and principles will be introduced

More information

Dynamics of Ocean Structures Prof. Dr. Srinivasan Chandrasekaran Department of Ocean Engineering Indian Institute of Technology, Madras

Dynamics of Ocean Structures Prof. Dr. Srinivasan Chandrasekaran Department of Ocean Engineering Indian Institute of Technology, Madras Dynamics of Ocean Structures Prof. Dr. Srinivasan Chandrasekaran Department of Ocean Engineering Indian Institute of Technology, Madras Module - 1 Lecture - 10 Methods of Writing Equation of Motion (Refer

More information

Contents. Dynamics and control of mechanical systems. Focus on

Contents. Dynamics and control of mechanical systems. Focus on Dynamics and control of mechanical systems Date Day 1 (01/08) Day 2 (03/08) Day 3 (05/08) Day 4 (07/08) Day 5 (09/08) Day 6 (11/08) Content Review of the basics of mechanics. Kinematics of rigid bodies

More information

Structural Dynamics. Spring mass system. The spring force is given by and F(t) is the driving force. Start by applying Newton s second law (F=ma).

Structural Dynamics. Spring mass system. The spring force is given by and F(t) is the driving force. Start by applying Newton s second law (F=ma). Structural Dynamics Spring mass system. The spring force is given by and F(t) is the driving force. Start by applying Newton s second law (F=ma). We will now look at free vibrations. Considering the free

More information

Introduction to Vibration. Mike Brennan UNESP, Ilha Solteira São Paulo Brazil

Introduction to Vibration. Mike Brennan UNESP, Ilha Solteira São Paulo Brazil Introduction to Vibration Mike Brennan UNESP, Ilha Solteira São Paulo Brazil Vibration Most vibrations are undesirable, but there are many instances where vibrations are useful Ultrasonic (very high

More information

Introduction to Continuous Systems. Continuous Systems. Strings, Torsional Rods and Beams.

Introduction to Continuous Systems. Continuous Systems. Strings, Torsional Rods and Beams. Outline of Continuous Systems. Introduction to Continuous Systems. Continuous Systems. Strings, Torsional Rods and Beams. Vibrations of Flexible Strings. Torsional Vibration of Rods. Bernoulli-Euler Beams.

More information

Dynamics of Ocean Structures Prof. Dr. Srinivasan Chandrasekaran Department of Ocean Engineering Indian Institute of Technology, Madras

Dynamics of Ocean Structures Prof. Dr. Srinivasan Chandrasekaran Department of Ocean Engineering Indian Institute of Technology, Madras Dynamics of Ocean Structures Prof. Dr. Srinivasan Chandrasekaran Department of Ocean Engineering Indian Institute of Technology, Madras Module - 01 Lecture - 09 Characteristics of Single Degree - of -

More information

WEEKS 8-9 Dynamics of Machinery

WEEKS 8-9 Dynamics of Machinery WEEKS 8-9 Dynamics of Machinery References Theory of Machines and Mechanisms, J.J.Uicker, G.R.Pennock ve J.E. Shigley, 2011 Mechanical Vibrations, Singiresu S. Rao, 2010 Mechanical Vibrations: Theory and

More information

Dynamics of Machinery

Dynamics of Machinery Dynamics of Machinery Two Mark Questions & Answers Varun B Page 1 Force Analysis 1. Define inertia force. Inertia force is an imaginary force, which when acts upon a rigid body, brings it to an equilibrium

More information

DEVIL PHYSICS THE BADDEST CLASS ON CAMPUS IB PHYSICS

DEVIL PHYSICS THE BADDEST CLASS ON CAMPUS IB PHYSICS DEVIL PHYSICS THE BADDEST CLASS ON CAMPUS IB PHYSICS TSOKOS LESSON 4-1 SIMPLE HARMONIC MOTION Introductory Video: Simple Harmonic Motion IB Assessment Statements Topic 4.1, Kinematics of Simple Harmonic

More information

University of California at Berkeley Structural Engineering Mechanics & Materials Department of Civil & Environmental Engineering Spring 2012 Student name : Doctoral Preliminary Examination in Dynamics

More information

Introduction to Geotechnical Earthquake Engineering

Introduction to Geotechnical Earthquake Engineering Module 1 Introduction to Geotechnical Earthquake Engineering by Dr. Deepankar Choudhury Professor Department of Civil Engineering IIT Bombay, Powai, Mumbai 400 076, India. Email: dc@civil.iitb.ac.in URL:

More information

Explosion Protection of Buildings

Explosion Protection of Buildings Explosion Protection of Buildings Author: Miroslav Mynarz Explosion Protection of Buildings Introduction to the Problems of Determination of Building Structure's Response 3 Classification of actions According

More information

HOMEWORK ANSWERS. Lesson 4.1: Simple Harmonic Motion

HOMEWORK ANSWERS. Lesson 4.1: Simple Harmonic Motion DEVIL PHYSICS HOMEWORK ANSWERS Tsokos, Chapter 3 Test Lesson 4.1: Simple Harmonic Motion 1. Objectives. By the end of this class you should be able to: a) Understand that in simple harmonic motion there

More information

VIBRATION ANALYSIS OF E-GLASS FIBRE RESIN MONO LEAF SPRING USED IN LMV

VIBRATION ANALYSIS OF E-GLASS FIBRE RESIN MONO LEAF SPRING USED IN LMV VIBRATION ANALYSIS OF E-GLASS FIBRE RESIN MONO LEAF SPRING USED IN LMV Mohansing R. Pardeshi 1, Dr. (Prof.) P. K. Sharma 2, Prof. Amit Singh 1 M.tech Research Scholar, 2 Guide & Head, 3 Co-guide & Assistant

More information

Preliminary Examination - Dynamics

Preliminary Examination - Dynamics Name: University of California, Berkeley Fall Semester, 2018 Problem 1 (30% weight) Preliminary Examination - Dynamics An undamped SDOF system with mass m and stiffness k is initially at rest and is then

More information

Dynamics and control of mechanical systems

Dynamics and control of mechanical systems Dynamics and control of mechanical systems Date Day 1 (03/05) - 05/05 Day 2 (07/05) Day 3 (09/05) Day 4 (11/05) Day 5 (14/05) Day 6 (16/05) Content Review of the basics of mechanics. Kinematics of rigid

More information

Chapter 13. Simple Harmonic Motion

Chapter 13. Simple Harmonic Motion Chapter 13 Simple Harmonic Motion Hooke s Law F s = - k x F s is the spring force k is the spring constant It is a measure of the stiffness of the spring A large k indicates a stiff spring and a small

More information

Engineering Science OUTCOME 2 - TUTORIAL 3 FREE VIBRATIONS

Engineering Science OUTCOME 2 - TUTORIAL 3 FREE VIBRATIONS Unit 2: Unit code: QCF Level: 4 Credit value: 5 Engineering Science L/60/404 OUTCOME 2 - TUTORIAL 3 FREE VIBRATIONS UNIT CONTENT OUTCOME 2 Be able to determine the behavioural characteristics of elements

More information

Dynamics of Structures

Dynamics of Structures Dynamics of Structures Elements of structural dynamics Roberto Tomasi 11.05.2017 Roberto Tomasi Dynamics of Structures 11.05.2017 1 / 22 Overview 1 SDOF system SDOF system Equation of motion Response spectrum

More information

Stochastic Dynamics of SDOF Systems (cont.).

Stochastic Dynamics of SDOF Systems (cont.). Outline of Stochastic Dynamics of SDOF Systems (cont.). Weakly Stationary Response Processes. Equivalent White Noise Approximations. Gaussian Response Processes as Conditional Normal Distributions. Stochastic

More information

Modeling Mechanical Systems

Modeling Mechanical Systems Modeling Mechanical Systems Mechanical systems can be either translational or rotational. Although the fundamental relationships for both types are derived from Newton s law, they are different enough

More information

T1 T e c h n i c a l S e c t i o n

T1 T e c h n i c a l S e c t i o n 1.5 Principles of Noise Reduction A good vibration isolation system is reducing vibration transmission through structures and thus, radiation of these vibration into air, thereby reducing noise. There

More information

Modeling and Experimentation: Mass-Spring-Damper System Dynamics

Modeling and Experimentation: Mass-Spring-Damper System Dynamics Modeling and Experimentation: Mass-Spring-Damper System Dynamics Prof. R.G. Longoria Department of Mechanical Engineering The University of Texas at Austin July 20, 2014 Overview 1 This lab is meant to

More information

(Refer Slide Time: 1: 19)

(Refer Slide Time: 1: 19) Mechanical Measurements and Metrology Prof. S. P. Venkateshan Department of Mechanical Engineering Indian Institute of Technology, Madras Module - 4 Lecture - 46 Force Measurement So this will be lecture

More information

Dynamics of Structures: Theory and Analysis

Dynamics of Structures: Theory and Analysis 1. Free vibrations 2. Forced vibrations 3. Transient response 4. Damping mechanisms Dynamics of Structures: Theory and Analysis Steen Krenk Technical University of Denmark 5. Modal analysis I: Basic idea

More information

7. Vibrations DE2-EA 2.1: M4DE. Dr Connor Myant

7. Vibrations DE2-EA 2.1: M4DE. Dr Connor Myant DE2-EA 2.1: M4DE Dr Connor Myant 7. Vibrations Comments and corrections to connor.myant@imperial.ac.uk Lecture resources may be found on Blackboard and at http://connormyant.com Contents Introduction...

More information

Identification Methods for Structural Systems. Prof. Dr. Eleni Chatzi Lecture March, 2016

Identification Methods for Structural Systems. Prof. Dr. Eleni Chatzi Lecture March, 2016 Prof. Dr. Eleni Chatzi Lecture 4-09. March, 2016 Fundamentals Overview Multiple DOF Systems State-space Formulation Eigenvalue Analysis The Mode Superposition Method The effect of Damping on Structural

More information

Oscillations. Oscillations and Simple Harmonic Motion

Oscillations. Oscillations and Simple Harmonic Motion Oscillations AP Physics C Oscillations and Simple Harmonic Motion 1 Equilibrium and Oscillations A marble that is free to roll inside a spherical bowl has an equilibrium position at the bottom of the bowl

More information

18.12 FORCED-DAMPED VIBRATIONS

18.12 FORCED-DAMPED VIBRATIONS 8. ORCED-DAMPED VIBRATIONS Vibrations A mass m is attached to a helical spring and is suspended from a fixed support as before. Damping is also provided in the system ith a dashpot (ig. 8.). Before the

More information

MODAL ANALYSIS OF PLANE FRAMES

MODAL ANALYSIS OF PLANE FRAMES MODAL ANALYSIS OF PLANE FRAMES Mr. Mohammed Siraj Professor, Department of Civil Engineering, Deogiri Institute of Engineering and Management Studies Aurangabad, M.S, India. ABSTRACT In the modal analysis

More information

DEVIL PHYSICS THE BADDEST CLASS ON CAMPUS AP PHYSICS

DEVIL PHYSICS THE BADDEST CLASS ON CAMPUS AP PHYSICS DEVIL PHYSICS THE BADDEST CLASS ON CAMPUS AP PHYSICS LSN 11-1: SIMPLE HARMONIC MOTION LSN 11-: ENERGY IN THE SIMPLE HARMONIC OSCILLATOR LSN 11-3: PERIOD AND THE SINUSOIDAL NATURE OF SHM Introductory Video:

More information

Chapter 15. Oscillatory Motion

Chapter 15. Oscillatory Motion Chapter 15 Oscillatory Motion Part 2 Oscillations and Mechanical Waves Periodic motion is the repeating motion of an object in which it continues to return to a given position after a fixed time interval.

More information

Section 3.7: Mechanical and Electrical Vibrations

Section 3.7: Mechanical and Electrical Vibrations Section 3.7: Mechanical and Electrical Vibrations Second order linear equations with constant coefficients serve as mathematical models for mechanical and electrical oscillations. For example, the motion

More information

In the presence of viscous damping, a more generalized form of the Lagrange s equation of motion can be written as

In the presence of viscous damping, a more generalized form of the Lagrange s equation of motion can be written as 2 MODELING Once the control target is identified, which includes the state variable to be controlled (ex. speed, position, temperature, flow rate, etc), and once the system drives are identified (ex. force,

More information

Chapter 5 Design. D. J. Inman 1/51 Mechanical Engineering at Virginia Tech

Chapter 5 Design. D. J. Inman 1/51 Mechanical Engineering at Virginia Tech Chapter 5 Design Acceptable vibration levels (ISO) Vibration isolation Vibration absorbers Effects of damping in absorbers Optimization Viscoelastic damping treatments Critical Speeds Design for vibration

More information

Chapter 14. Oscillations. Oscillations Introductory Terminology Simple Harmonic Motion:

Chapter 14. Oscillations. Oscillations Introductory Terminology Simple Harmonic Motion: Chapter 14 Oscillations Oscillations Introductory Terminology Simple Harmonic Motion: Kinematics Energy Examples of Simple Harmonic Oscillators Damped and Forced Oscillations. Resonance. Periodic Motion

More information

Module 4: Dynamic Vibration Absorbers and Vibration Isolator Lecture 19: Active DVA. The Lecture Contains: Development of an Active DVA

Module 4: Dynamic Vibration Absorbers and Vibration Isolator Lecture 19: Active DVA. The Lecture Contains: Development of an Active DVA The Lecture Contains: Development of an Active DVA Proof Mass Actutor Application of Active DVA file:///d /chitra/vibration_upload/lecture19/19_1.htm[6/25/2012 12:35:51 PM] In this section, we will consider

More information

Structural Dynamics Lecture Eleven: Dynamic Response of MDOF Systems: (Chapter 11) By: H. Ahmadian

Structural Dynamics Lecture Eleven: Dynamic Response of MDOF Systems: (Chapter 11) By: H. Ahmadian Structural Dynamics Lecture Eleven: Dynamic Response of MDOF Systems: (Chapter 11) By: H. Ahmadian ahmadian@iust.ac.ir Dynamic Response of MDOF Systems: Mode-Superposition Method Mode-Superposition Method:

More information

Final Exam Solution Dynamics :45 12:15. Problem 1 Bateau

Final Exam Solution Dynamics :45 12:15. Problem 1 Bateau Final Exam Solution Dynamics 2 191157140 31-01-2013 8:45 12:15 Problem 1 Bateau Bateau is a trapeze act by Cirque du Soleil in which artists perform aerial maneuvers on a boat shaped structure. The boat

More information

Table of Contents. Preface... 13

Table of Contents. Preface... 13 Table of Contents Preface... 13 Chapter 1. Vibrations of Continuous Elastic Solid Media... 17 1.1. Objective of the chapter... 17 1.2. Equations of motion and boundary conditions of continuous media...

More information

Codal Provisions IS 1893 (Part 1) 2002

Codal Provisions IS 1893 (Part 1) 2002 Abstract Codal Provisions IS 1893 (Part 1) 00 Paresh V. Patel Assistant Professor, Civil Engineering Department, Nirma Institute of Technology, Ahmedabad 38481 In this article codal provisions of IS 1893

More information

CE6701 STRUCTURAL DYNAMICS AND EARTHQUAKE ENGINEERING QUESTION BANK UNIT I THEORY OF VIBRATIONS PART A

CE6701 STRUCTURAL DYNAMICS AND EARTHQUAKE ENGINEERING QUESTION BANK UNIT I THEORY OF VIBRATIONS PART A CE6701 STRUCTURAL DYNAMICS AND EARTHQUAKE ENGINEERING QUESTION BANK UNIT I THEORY OF VIBRATIONS PART A 1. What is mean by Frequency? 2. Write a short note on Amplitude. 3. What are the effects of vibration?

More information

on the figure. Someone has suggested that, in terms of the degrees of freedom x1 and M. Note that if you think the given 1.2

on the figure. Someone has suggested that, in terms of the degrees of freedom x1 and M. Note that if you think the given 1.2 1) A two-story building frame is shown below. The mass of the frame is assumed to be lumped at the floor levels and the floor slabs are considered rigid. The floor masses and the story stiffnesses are

More information

Dynamics of Ocean Structures Prof. Dr. Srinivasan Chandrasekaran Department of Ocean Engineering Indian Institute of Technology, Madras

Dynamics of Ocean Structures Prof. Dr. Srinivasan Chandrasekaran Department of Ocean Engineering Indian Institute of Technology, Madras Dynamics of Ocean Structures Prof. Dr. Srinivasan Chandrasekaran Department of Ocean Engineering Indian Institute of Technology, Madras Module - 1 Lecture - 13 Undamped and Damped Systems II (Refer Slide

More information

International Journal of Advance Engineering and Research Development

International Journal of Advance Engineering and Research Development Scientific Journal of Impact Factor (SJIF): 4.72 International Journal of Advance Engineering and Research Development Volume 4, Issue 11, November -2017 e-issn (O): 2348-4470 p-issn (P): 2348-6406 Study

More information

Dynamic Loads CE 543. Examples. Harmonic Loads

Dynamic Loads CE 543. Examples. Harmonic Loads CE 543 Structural Dynamics Introduction Dynamic Loads Dynamic loads are time-varying loads. (But time-varying loads may not require dynamic analysis.) Dynamics loads can be grouped in one of the following

More information

Another Method to get a Sine Wave. X = A cos θ V = Acc =

Another Method to get a Sine Wave. X = A cos θ V = Acc = LAST NAME FIRST NAME DATE PER CJ Wave Assignment 10.3 Energy & Simple Harmonic Motion Conceptual Questions 3, 4, 6, 7, 9 page 313 6, 7, 33, 34 page 314-316 Tracing the movement of the mass on the end of

More information

Free Vibration of Single-Degree-of-Freedom (SDOF) Systems

Free Vibration of Single-Degree-of-Freedom (SDOF) Systems Free Vibration of Single-Degree-of-Freedom (SDOF) Systems Procedure in solving structural dynamics problems 1. Abstraction/modeling Idealize the actual structure to a simplified version, depending on the

More information

Vibrations Qualifying Exam Study Material

Vibrations Qualifying Exam Study Material Vibrations Qualifying Exam Study Material The candidate is expected to have a thorough understanding of engineering vibrations topics. These topics are listed below for clarification. Not all instructors

More information

Chapter 14 Periodic Motion

Chapter 14 Periodic Motion Chapter 14 Periodic Motion 1 Describing Oscillation First, we want to describe the kinematical and dynamical quantities associated with Simple Harmonic Motion (SHM), for example, x, v x, a x, and F x.

More information

Applications of Second-Order Differential Equations

Applications of Second-Order Differential Equations Applications of Second-Order Differential Equations ymy/013 Building Intuition Even though there are an infinite number of differential equations, they all share common characteristics that allow intuition

More information

International Journal of Emerging Technologies in Computational and Applied Sciences (IJETCAS)

International Journal of Emerging Technologies in Computational and Applied Sciences (IJETCAS) International Association of Scientific Innovation and Research (IASIR) (An Association Unifying the Sciences, Engineering, and Applied Research) International Journal of Emerging Technologies in Computational

More information

BIRLA INSTITUTE OF TECHNOLOGY AND SCIENCE, Pilani Pilani Campus

BIRLA INSTITUTE OF TECHNOLOGY AND SCIENCE, Pilani Pilani Campus First Semester 2017-2018 Instruction Division Course Handout (Part II) Date: 02/08/2017 In addition to Part I (General Handout for all courses appended to the Time Table), this portion gives further specific

More information

MODEL PAPER CLASS XI PHYSICS (GROUP 1) BLUEPRINT Name of chapter (1)

MODEL PAPER CLASS XI PHYSICS (GROUP 1) BLUEPRINT Name of chapter (1) sr. no. MODEL PAPER CLASS XI PHYSICS (GROUP ) BLUEPRINT Name of chapter VSAQ () SA-I (2) SA-II (3) Value based (4) LA(5) Total 70 Physical world and measurement 3 2 Kinematics 2 3,3 5 3 Laws of motion

More information

Chapter a. Spring constant, k : The change in the force per unit length change of the spring. b. Coefficient of subgrade reaction, k:

Chapter a. Spring constant, k : The change in the force per unit length change of the spring. b. Coefficient of subgrade reaction, k: Principles of Soil Dynamics 3rd Edition Das SOLUTIONS MANUAL Full clear download (no formatting errors) at: https://testbankreal.com/download/principles-soil-dynamics-3rd-editiondas-solutions-manual/ Chapter

More information

ME 328 Machine Design Vibration handout (vibrations is not covered in text)

ME 328 Machine Design Vibration handout (vibrations is not covered in text) ME 38 Machine Design Vibration handout (vibrations is not covered in text) The ollowing are two good textbooks or vibrations (any edition). There are numerous other texts o equal quality. M. L. James,

More information

1 Oscillations MEI Conference 2009

1 Oscillations MEI Conference 2009 1 Oscillations MEI Conference 2009 Some Background Information There is a film clip you can get from Youtube of the Tacoma Narrows Bridge called Galloping Gertie. This shows vibrations in the bridge increasing

More information

Chapter 23: Principles of Passive Vibration Control: Design of absorber

Chapter 23: Principles of Passive Vibration Control: Design of absorber Chapter 23: Principles of Passive Vibration Control: Design of absorber INTRODUCTION The term 'vibration absorber' is used for passive devices attached to the vibrating structure. Such devices are made

More information

The Harmonic Oscillator

The Harmonic Oscillator The Harmonic Oscillator Math 4: Ordinary Differential Equations Chris Meyer May 3, 008 Introduction The harmonic oscillator is a common model used in physics because of the wide range of problems it can

More information

1. Multiple Degree-of-Freedom (MDOF) Systems: Introduction

1. Multiple Degree-of-Freedom (MDOF) Systems: Introduction 1. Multiple Degree-of-Freedom (MDOF) Systems: Introduction Lesson Objectives: 1) List examples of MDOF structural systems and state assumptions of the idealizations. 2) Formulate the equation of motion

More information

Oscillatory Motion SHM

Oscillatory Motion SHM Chapter 15 Oscillatory Motion SHM Dr. Armen Kocharian Periodic Motion Periodic motion is motion of an object that regularly repeats The object returns to a given position after a fixed time interval A

More information

INELASTIC SEISMIC DISPLACEMENT RESPONSE PREDICTION OF MDOF SYSTEMS BY EQUIVALENT LINEARIZATION

INELASTIC SEISMIC DISPLACEMENT RESPONSE PREDICTION OF MDOF SYSTEMS BY EQUIVALENT LINEARIZATION INEASTIC SEISMIC DISPACEMENT RESPONSE PREDICTION OF MDOF SYSTEMS BY EQUIVAENT INEARIZATION M. S. Günay 1 and H. Sucuoğlu 1 Research Assistant, Dept. of Civil Engineering, Middle East Technical University,

More information

Differential Equations

Differential Equations Differential Equations A differential equation (DE) is an equation which involves an unknown function f (x) as well as some of its derivatives. To solve a differential equation means to find the unknown

More information

where G is called the universal gravitational constant.

where G is called the universal gravitational constant. UNIT-I BASICS & STATICS OF PARTICLES 1. What are the different laws of mechanics? First law: A body does not change its state of motion unless acted upon by a force or Every object in a state of uniform

More information

Chapter 12 Vibrations and Waves Simple Harmonic Motion page

Chapter 12 Vibrations and Waves Simple Harmonic Motion page Chapter 2 Vibrations and Waves 2- Simple Harmonic Motion page 438-45 Hooke s Law Periodic motion the object has a repeated motion that follows the same path, the object swings to and fro. Examples: a pendulum

More information

DEVIL PHYSICS THE BADDEST CLASS ON CAMPUS IB PHYSICS

DEVIL PHYSICS THE BADDEST CLASS ON CAMPUS IB PHYSICS DEVIL PHYSICS THE BADDEST CLASS ON CAMPUS IB PHYSICS TSOKOS LESSON 4-1 SIMPLE HARMONIC MOTION Introductory Video: Simple Harmonic Motion Essential Idea: A study of oscillations underpins many areas of

More information

Equations. A body executing simple harmonic motion has maximum acceleration ) At the mean positions ) At the two extreme position 3) At any position 4) he question is irrelevant. A particle moves on the

More information

Dynamic Modelling of Mechanical Systems

Dynamic Modelling of Mechanical Systems Dynamic Modelling of Mechanical Systems Dr. Bishakh Bhattacharya Professor, Department of Mechanical Engineering g IIT Kanpur Joint Initiative of IITs and IISc - Funded by MHRD Hints of the Last Assignment

More information

Structural Dynamics A Graduate Course in Aerospace Engineering

Structural Dynamics A Graduate Course in Aerospace Engineering Structural Dynamics A Graduate Course in Aerospace Engineering By: H. Ahmadian ahmadian@iust.ac.ir The Science and Art of Structural Dynamics What do all the followings have in common? > A sport-utility

More information

Lectures Chapter 10 (Cutnell & Johnson, Physics 7 th edition)

Lectures Chapter 10 (Cutnell & Johnson, Physics 7 th edition) PH 201-4A spring 2007 Simple Harmonic Motion Lectures 24-25 Chapter 10 (Cutnell & Johnson, Physics 7 th edition) 1 The Ideal Spring Springs are objects that exhibit elastic behavior. It will return back

More information

MECHANICS OF STRUCTURES SCI 1105 COURSE MATERIAL UNIT - I

MECHANICS OF STRUCTURES SCI 1105 COURSE MATERIAL UNIT - I MECHANICS OF STRUCTURES SCI 1105 COURSE MATERIAL UNIT - I Engineering Mechanics Branch of science which deals with the behavior of a body with the state of rest or motion, subjected to the action of forces.

More information

Lecture 6 mechanical system modeling equivalent mass gears

Lecture 6 mechanical system modeling equivalent mass gears M2794.25 Mechanical System Analysis 기계시스템해석 lecture 6,7,8 Dongjun Lee ( 이동준 ) Department of Mechanical & Aerospace Engineering Seoul National University Dongjun Lee Lecture 6 mechanical system modeling

More information

e jωt = cos(ωt) + jsin(ωt),

e jωt = cos(ωt) + jsin(ωt), This chapter introduces you to the most useful mechanical oscillator model, a mass-spring system with a single degree of freedom. Basic understanding of this system is the gateway to the understanding

More information

Name: Fall 2014 CLOSED BOOK

Name: Fall 2014 CLOSED BOOK Name: Fall 2014 1. Rod AB with weight W = 40 lb is pinned at A to a vertical axle which rotates with constant angular velocity ω =15 rad/s. The rod position is maintained by a horizontal wire BC. Determine

More information

Read textbook CHAPTER 1.4, Apps B&D

Read textbook CHAPTER 1.4, Apps B&D Lecture 2 Read textbook CHAPTER 1.4, Apps B&D Today: Derive EOMs & Linearization undamental equation of motion for mass-springdamper system (1DO). Linear and nonlinear system. Examples of derivation of

More information

Chapter 13 Lecture. Essential University Physics Richard Wolfson 2 nd Edition. Oscillatory Motion Pearson Education, Inc.

Chapter 13 Lecture. Essential University Physics Richard Wolfson 2 nd Edition. Oscillatory Motion Pearson Education, Inc. Chapter 13 Lecture Essential University Physics Richard Wolfson nd Edition Oscillatory Motion Slide 13-1 In this lecture you ll learn To describe the conditions under which oscillatory motion occurs To

More information

Address for Correspondence

Address for Correspondence Research Article EXPERIMENT STUDY OF DYNAMIC RESPONSE OF SOFT STOREY BUILDING MODEL C. S. Sanghvi 1, H S Patil 2 and B J Shah 3 Address for Correspondence 1 Associate Professor, Applied Mechanics Department,

More information

Topic 5 Notes Jeremy Orloff. 5 Homogeneous, linear, constant coefficient differential equations

Topic 5 Notes Jeremy Orloff. 5 Homogeneous, linear, constant coefficient differential equations Topic 5 Notes Jeremy Orloff 5 Homogeneous, linear, constant coefficient differential equations 5.1 Goals 1. Be able to solve homogeneous constant coefficient linear differential equations using the method

More information

Comparison between the visco-elastic dampers And Magnetorheological dampers and study the Effect of temperature on the damping properties

Comparison between the visco-elastic dampers And Magnetorheological dampers and study the Effect of temperature on the damping properties Comparison between the visco-elastic dampers And Magnetorheological dampers and study the Effect of temperature on the damping properties A.Q. Bhatti National University of Sciences and Technology (NUST),

More information

Simple Harmonic Motion

Simple Harmonic Motion Simple Harmonic Motion (FIZ 101E - Summer 2018) July 29, 2018 Contents 1 Introduction 2 2 The Spring-Mass System 2 3 The Energy in SHM 5 4 The Simple Pendulum 6 5 The Physical Pendulum 8 6 The Damped Oscillations

More information