Bergen Community College Division of Math, Science and Technology Department of Physical Sciences. Course Syllabus PHY 294 Engineering Mechanics

Size: px
Start display at page:

Download "Bergen Community College Division of Math, Science and Technology Department of Physical Sciences. Course Syllabus PHY 294 Engineering Mechanics"

Transcription

1 Bergen Community College Division of Math, Science and Technology Department of Physical Sciences Course Syllabus PHY 294 Engineering Mechanics Semester and year: Course Number: Meeting Times and Locations: Instructor: Office Location: Phone: Office Hours: Address: Course Title and Number: Engineering Mechanics, PHY 294 Prerequisites: Calculus III, MAT 282; Physics I, PHY 280; (or PHY 190) with grades of "C" or better. Course Credits: 4 Course Hours: 4 lecture hours Course Description: Engineering Mechanics is a study of the state of rest or motion of bodies under the action of forces. This course builds a foundation of analytic capability for the solution of a great variety of engineering problems. Topics covered include the statics and dynamics of particles and rigid bodies. Student Learning Outcomes/Behavioral Objectives The student, drawing upon knowledge and skills previously acquired in the prerequisite courses, will begin to synthesize that important material. The student will also demonstrate the following skills: 1. Precise plan the solution to a physical problem by paying strict attention to the very finest of details. 2. Precise use of coordinate systems advantageously in any given problem. 3. Precise use of mathematical symbols, diagrams, graphs, and sketches. 4. Precise use of the laws of statics and dynamics with appropriate mathematics using precise diagrams and critical thinking. Course Grades/Evaluation Methods: The grade for the course is weighted according to the following scheme: 1. Three or more non-cumulative (modular) "hourly" exams and possibly quizzes... 60% 2. Final Exam (Cumulative)... 40% Materials and Supplies: In addition to the required text a pocket-sized calculator (solar cell recommended to avoid battery failure at crucial times) is recommended having advanced mathematical functions. Graphing capability would be advantageous. Required Text: Engineering Mechanics, by J. L. Merriam and L. G. Kraige, John Wiley and Sons, 7th edition, ISBN #: , Vol. I (Statics) , Vol. II (Dynamics) Course Contents: 1. Forces 7. Kinematics of Particles 2. Equilibrium 8. Kinetics of Particles and Systems of Particles 3. Structures 9. Plane Kinematics of Rigid Bodies 4. Distributed Forces 10. Plane Kinetics of Rigid Bodies 5. Friction 11. Introduction to Three-Dimensional Dynamics of 6. Virtual Work Rigid Bodies 12. Vibration and Time Response

2 Text Assignments: READ AND STUDY CHAPTER/SECTION SOLVE PROBLEMS 1 Introduction to Statics 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 2/1 Introduction to Force Systems 2/2 Force 2/3 Rectangular Components (2D) 22, 25 2/4 Moment (2D) 34, 35, 37 2/5 Couple (2D) 61, 62, 72 2/6 Resultants (2D) 80, 81 2/7 Rectangular Components (3D) 102, 107 2/8 Moment and Couple (3D) 121, 125 2/9 Resultants (3D) 140, 141, 145 Computer Problem 169 3/1 Introduction to Equilibrium 3/2 Mechanical System Isolation (2D) 3/3 Equilibrium Conditions (2D) 18, 21, 26, 27, 33 3/4 Equilibrium Conditions (3D) 71, 73, 78, 87, 93 Computer Problem 112 EXAM #1 4/1 Introduction to Structures 4/2 Plane Trusses 4/3 Method of Joints 1, 4, 5, 7, 15 4/4 Method of Sections 29, 34, 41 4/5 Space Trusses 53, 55 4/6 Frames and Machines 75, 77, 83, 86 Computer Problem 139 5/1 Introduction to Distributed Forces 5/2 Center of Mass and Centroids 5/3 Centroids of Lines, Areas, and Volumes 3, 20, 30, 33 5/4 Composite Bodies and Figures; Approximations 63 5/5 Theorems of Pappus 91 5/6 Beams-External Effects 100, 101, 105, 109 5/7 Beams-Internal Effects 129, 131 5/8 Flexible Cables 151 5/9 Fluid Statics 175, 183, 189 Computer Problem 215 6/1 Introduction to Friction 6/2 Types of Friction 6/3 Dry Friction 15, 17, 25, 33, 43 6/4 Wedges 6/5 Screws 51, 52, 59 6/6 Journal Bearings 6/7 Thrust Bearings; Disk Friction 73, 77 6/8 Flexible Belts 6/9 Rolling Resistance 93, 101 Computer Problem 129 7/1 Introduction to Virtual Work 7/2 Work 6, 9, 10, 15, 23

3 7/3 Equilibrium 7/4 Potential Energy and Stability 39, 43, 47, 48 Computer Problem 70 EXAM #2 1 Introduction to Dynamics 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 12 2/1 Introduction to Kinematics of Particles 2/2 Rectilinear Motion 3, 4, 10, 14, 22, 27, 37, 45, 51 2/3 Plane Curvilinear Motion 2/4 Rectangular Coordinates (x-y) 69, 78, 83 2/5 Normal and Tangential Coordinates (n-t) 105, 110, 115, 127 2/6 Polar Coordinates (r- 141, 147, 158 2/7 Space Curvilinear Motion 173, 182 2/8 Relative Motion (Translating Axes) 192, 206 2/9 Constrained Motion of Connected Particles 215, 222 3/1 Introduction to the Kinetics of Particles 3/2 Newton's Second Law 3/3 Equation of Motion and Solution of Problems 3/4 Rectilinear Motion 9, 17, 29, 37, 47 3/5 Curvilinear Motion 57, 59, 62, 78, 89 3/6 Work and Kinetic Energy 110, 114, 116, 126, 141, 142 3/7 Potential Energy 147, 153, 161, 165 3/8 Introduction to Impulse and Momentum 3/9 Linear Impulse and Linear Momentum 181, 193, 203, 218 3/10 Angular Impulse and Angular Momentum 227, 232, 241 3/11 Introduction to Special Applications 3/12 Impact 245, 251, 257 3/13 Central-Force Motion 273, 277, 293 3/14 Relative Motion 305, 309, 315, 318 EXAM #3 4/1 Introduction to Kinetics of Systems of Particles 4/2 Generalized Newton's Second Law 4/3 Work-Energy 4/4 Impulse-Momentum 4/5 Conservation of Energy and Momentum 1, 2, 7, 11, 17 4/6 Steady Mass Flow 34, 37, 45, 49, 64 4/7 Variable Mass 69, 77, 81 5/1 Introduction to Plane Kinematics of

4 Rigid Bodies 5/2 Rotation 3, 5, 11, 20 5/3 Absolute Motion 25, 41 5/4 Relative Velocity 65, 69, 81 5/5 Instantaneous Center of Zero Velocity 97 5/6 Relative Acceleration 121 5/7 Motion Relative to Rotating Axes 153 6/1 Introduction to Plane Kinetics of Rigid Bodies 6/2 General Equations of Motion 6/3 Translation 1, 7, 32 6/4 Fixed-Axis Rotation 41, 47, 67 6/5 General Plane Motion 77, 82, 110 6/6 Work-Energy Relations 123, 129, 137 6/7 Acceleration from Work-Energy; Virtual Work 167, 169 6/8 Impulse-Momentum Equations 188, 191, 203 7/1 Introduction to Three-Dimensional Dynamics of Rigid Bodies 7/2 Translation 7/3 Fixed-Axis Rotation 7/4 Parallel-Plane Motion 7/5 Rotation about a Fixed Point 3, 5, 7, 15 7/6 General Motion 33, 45 7/7 Angular Momentum 7/8 Kinetic Energy 55, 71 7/9 Momentum and Energy Equations of Motion 7/10 Parallel-Plane Motion 75, 79 7/11 Gyroscopic Motion: Steady Precession 101, 105, 120 EXAM #4 8/1 Introduction to Vibration and Time Response 8/2 Free Vibration of Particles 1, 11, 15, 27, 31, 33 8/3 Forced Vibration of Particles 47, 51, 57, 65 8/4 Vibration of Rigid Bodies 73, 81, 93 8/5 Energy Methods 99, 103 FINAL EXAM

5 Bibliography and Supporting Materials: 1. Engineering Mechanics, Combined Statics and Dynamics, by R. C. Hibbeler, Prentice Hall, 8th edition, ISBN # Vector Mechanics for Engineers, Statics and Dynamics, by Ferdinand P. Beer and E. Russell Johnston, Jr., McGraw-Hill Publishing Co., 6th edition, ISBN # Engineering Mechanics, Statics and Dynamics, by I. C. Jong and B. G. Rogers, Saunders College Publishing, ISBN # (Statics) , (Dynamics) Engineering Mechanics, by Andrew Pytel and Jaan Kiusalaas, Brooks/Cole Publishers, 2 nd edition, ISBN # (Statics) , (Dynamics) SERVICES FOR STUDENTS WITH DISABILITIES Bergen Community College aims to create inclusive learning environments where all students have maximum opportunities for success. Any student who feels he or she may need an accommodation based on the impact of a disability should contact the Office of Specialized Services at or via at ossinfo@bergen.edu for assistance. All BCC students enrolled in credit courses are entitled to a WebAdvisor account. With WebAdvisor, you may register online, pay your bill, check your schedule, room assignments, GPA, and find out what courses you need to take. To find out more about WebAdvisor or to sign up online, visit < While there, please make sure you give us your preferred address. You'll find directions how to do this at < 8/9/17

Bergen Community College Division of Math, Science and Technology Department of Physical Sciences. Course Syllabus PHY 291 Physics III

Bergen Community College Division of Math, Science and Technology Department of Physical Sciences. Course Syllabus PHY 291 Physics III Semester and year: Course Number: Meeting Times and Locations: Instructor: Office Location: Phone: Office Hours: Email Address: COURSE TITLE AND NUMBER: PHY-291 Physics III Bergen Community College Division

More information

STATE UNIVERSITY OF NEW YORK COLLEGE OF TECHNOLOGY CANTON, NEW YORK COURSE OUTLINE ENGS STATICS

STATE UNIVERSITY OF NEW YORK COLLEGE OF TECHNOLOGY CANTON, NEW YORK COURSE OUTLINE ENGS STATICS STATE UNIVERSITY OF NEW YORK COLLEGE OF TECHNOLOGY CANTON, NEW YORK COURSE OUTLINE PREPARED BY: ARTHUR HURLBUT, Ph.D. P.E.(October 2006) UPDATED BY: MICHAEL J. NEWTOWN, P.E. (October 2006) REVISED BY:

More information

Bergen Community College Division of Mathematics, Science and Technology Department of Physical Sciences Course Syllabus PHY-186 General Physics I

Bergen Community College Division of Mathematics, Science and Technology Department of Physical Sciences Course Syllabus PHY-186 General Physics I Semester and year: Course Number: Meeting Times and Locations: Bergen Community College Division of Mathematics, Science and Technology Department of Physical Sciences Course Syllabus PHY-186 General Physics

More information

CENTRAL TEXAS COLLEGE SYLLABUS FOR ENGR 2301 Engineering Mechanics - Statics. Semester Hours Credit: 3

CENTRAL TEXAS COLLEGE SYLLABUS FOR ENGR 2301 Engineering Mechanics - Statics. Semester Hours Credit: 3 CENTRAL TEXAS COLLEGE SYLLABUS FOR ENGR 2301 Engineering Mechanics - Statics Semester Hours Credit: 3 I. INTRODUCTION A. ENGR 2301, Engineering Mechanics Statics, is a three-semester hour course that is

More information

STATICS AND DYNAMICS

STATICS AND DYNAMICS ENGINEERING MECHANICS STATICS AND DYNAMICS FOURTEENTH EDITION R. C. HIBBELER PEARSON Hoboken Boston Columbus San Francisco New York Indianapolis London Toronto Sydney Singapore Tokyo Montreal Dubai Madrid

More information

Bergen Community College Division of Mathematics, Science and Technology Department of Physical Sciences. Course Syllabus CHM 112 College Chemistry

Bergen Community College Division of Mathematics, Science and Technology Department of Physical Sciences. Course Syllabus CHM 112 College Chemistry Bergen Community College Division of Mathematics, Science and Technology Department of Physical Sciences Course Syllabus CHM 112 College Chemistry COURSE TITLE: PRE-REQUISITE: TEXTBOOK: CHM 112 College

More information

STATICS Chapter 1 Introductory Concepts

STATICS Chapter 1 Introductory Concepts Contents Preface to Adapted Edition... (v) Preface to Third Edition... (vii) List of Symbols and Abbreviations... (xi) PART - I STATICS Chapter 1 Introductory Concepts 1-1 Scope of Mechanics... 1 1-2 Preview

More information

HOUSTON COMMUNITY COLLEGE COURSE OUTLINE FOR Engineering Statics (ENGR 2301) Fall 2012 Class Number: 24432

HOUSTON COMMUNITY COLLEGE COURSE OUTLINE FOR Engineering Statics (ENGR 2301) Fall 2012 Class Number: 24432 HOUSTON COMMUNITY COLLEGE COURSE OUTLINE FOR Engineering Statics (ENGR 2301) Fall 2012 Class Number: 24432 Time and Location 9:00 AM 01:00 PM, Fridays, HCC Northwest College, Alief Branch, Room Number

More information

Engineering Statics and Dynamics PHYS 170 University Studies Program. Course Outline

Engineering Statics and Dynamics PHYS 170 University Studies Program. Course Outline Engineering Statics and Dynamics PHYS 170 University Studies Program Course Outline COURSE IMPLEMENTATION DATE: 2012 OUTLINE EFFECTIVE DATE: January 2016 COURSE OUTLINE REVIEW DATE: September 2021 GENERAL

More information

ME101: Engineering Mechanics ( )

ME101: Engineering Mechanics ( ) ME101: Engineering Mechanics (3 1 0 8) 2016-2017 (II Semester); Division IV Budhaditya Hazra Room N-307 Department of Civil Engineering budhaditya.hazra@iitg.ernet.in Phone: 258 3334/5334 Web: www.iitg.ernet.in/budhaditya.hazra

More information

SPRING SEMESTER AE 262 DYNAMICS. (02) Dr. Yavuz YAMAN

SPRING SEMESTER AE 262 DYNAMICS. (02) Dr. Yavuz YAMAN 2012-2013 SPRING SEMESTER AE 262 DYNAMICS INSTRUCTOR (01) Dr. Yavuz YAMAN (02) Dr. Yavuz YAMAN TEXTBOOK Vector Mechanics for Engineers DYNAMICS F.P. Beer, E.R. Johnston Jr. and W.E. Clausen Eighth Edition

More information

ENGR 3130: DYNAMICS University of Detroit Mercy Term I,

ENGR 3130: DYNAMICS University of Detroit Mercy Term I, ENGR 3130: DYNAMICS University of Detroit Mercy Term I, 2013-2014 Course Description: The application of kinematics and kinetics to particles and rigid bodies. The course considers fixed and moving reference

More information

Bergen Community College Division of Mathematics, Science and Technology Physical Science Department. Course Syllabus

Bergen Community College Division of Mathematics, Science and Technology Physical Science Department. Course Syllabus 1 Bergen Community College Division of Mathematics, Science and Technology Physical Science Department Course Syllabus CHM-140 General Chemistry I COURSE DESCRIPTION: CHM-140 General Chemistry I is a study

More information

Physical Science and Engineering. Course Information. Course Number: ME 100

Physical Science and Engineering. Course Information. Course Number: ME 100 Physical Science and Engineering Course Number: ME 100 Course Title: Course Information Basic Principles of Mechanics Academic Semester: Fall Academic Year: 2016-2017 Semester Start Date: 8/21/2016 Semester

More information

SYLLABUS FORM WESTCHESTER COMMUNITY COLLEGE Valhalla, NY lo595. l. Course #: PHYSC NAME OF ORIGINATOR /REVISOR: ALENA O CONNOR

SYLLABUS FORM WESTCHESTER COMMUNITY COLLEGE Valhalla, NY lo595. l. Course #: PHYSC NAME OF ORIGINATOR /REVISOR: ALENA O CONNOR SYLLABUS FORM WESTCHESTER COMMUNITY COLLEGE Valhalla, NY lo595 l. Course #: PHYSC 121 2. NAME OF ORIGINATOR /REVISOR: ALENA O CONNOR NAME OF COURSE ENGINEERING PHYSICS 1 WITH LAB 3. CURRENT DATE: SUMMER

More information

Course Syllabus for CIVL 2110 STATICS Spring

Course Syllabus for CIVL 2110 STATICS Spring Course Syllabus for CIVL 2110 STATICS Spring 2016-2017 Instructor: email: ilias@ust.hk Dr. Ilias DIMITRAKOPOULOS room: 3583 tel: 2358-5975: office hours Wed, Fri: 11:00-12:00 Lectures: Wed, Fri 16:30-18:00

More information

University of Macau Department of Electromechanical Engineering MECH102 - Applied Mechanics Syllabus 1 st Semester 2011/2012 Part A Course Outline

University of Macau Department of Electromechanical Engineering MECH102 - Applied Mechanics Syllabus 1 st Semester 2011/2012 Part A Course Outline University of Macau Department of Electromechanical Engineering MECH102 - Applied Mechanics Syllabus 1 st Semester 2011/2012 Part A Course Outline Compulsory course in Electromechanical Engineering Course

More information

INTERNATIONAL ISLAMIC UNIVERSITY MALAYSIA COURSE OUTLINE

INTERNATIONAL ISLAMIC UNIVERSITY MALAYSIA COURSE OUTLINE INTERNATIONAL ISLAMIC UNIVERSITY MALAYSIA COURSE OUTLINE Kulliyyah / Institute Department / Centre Programme Name of Course / Mode Engineering Mechanical Engineering All Engineering programmes Statics

More information

ME 025 Mechanics of Materials

ME 025 Mechanics of Materials ME 025 Mechanics of Materials General Information: Term: 2019 Summer Session Instructor: Staff Language of Instruction: English Classroom: TBA Office Hours: TBA Class Sessions Per Week: 5 Total Weeks:

More information

COLLEGE OF THE DESERT

COLLEGE OF THE DESERT COLLEGE OF THE DESERT Course Code ENGR-011 Course Outline of Record 1. Course Code: ENGR-011 2. a. Long Course Title: Statics b. Short Course Title: STATICS 3. a. Catalog Course Description: This course

More information

CE261 ENGINEERING MECHANICS - DYNAMICS

CE261 ENGINEERING MECHANICS - DYNAMICS CE1 ENGINEERING MECHANICS - DYNAMICS Instructor JORGE A. RAMÍREZ, PH.D. ASSOCIATE PROFESSOR Water Resources, Hydrologic and Environmental Sciences Division Civil Engineering Department A Engineering Bldg.

More information

Upon successful completion of this course, students should be competent to perform the following tasks:

Upon successful completion of this course, students should be competent to perform the following tasks: Course Information Course Prefix/Number: PHY 221 Course Title: University Physics Lecture Hours/Week: 3.0 Lab Hours/Week: 3.0 Credit Hours/Semester: 4.0 VA Statement/Distance Learning Attendance Textbook

More information

Modesto Junior College Course Outline of Record PHYS 101

Modesto Junior College Course Outline of Record PHYS 101 Modesto Junior College Course Outline of Record PHYS 101 I. OVERVIEW The following information will appear in the 2011-2012 catalog PHYS 101 General Physics: Mechanics 5 Units Prerequisite: Satisfactory

More information

COWLEY COLLEGE & Area Vocational Technical School

COWLEY COLLEGE & Area Vocational Technical School COWLEY COLLEGE & Area Vocational Technical School COURSE PROCEDURE FOR PHS 4570 STATICS 3 Credit Hours Student Level: This course is open to students on the college level in either the freshman or sophomore

More information

ENGINEERING MECHANICS: STATICS AND DYNAMICS

ENGINEERING MECHANICS: STATICS AND DYNAMICS ENGINEERING MECHANICS: STATICS AND DYNAMICS Dr. A.K. Tayal ENGINEERING MECHANICS STATICS AND DYNAMICS A.K. Tayal Ph. D. Formerly Professor Department of Mechanical Engineering Delhi College of Engineering

More information

STATICS & DYNAMICS. Engineering Mechanics. Gary L. Gray. Francesco Costanzo. Michael E. Plesha. University of Wisconsin-Madison

STATICS & DYNAMICS. Engineering Mechanics. Gary L. Gray. Francesco Costanzo. Michael E. Plesha. University of Wisconsin-Madison Engineering Mechanics STATICS & DYNAMICS SECOND EDITION Francesco Costanzo Department of Engineering Science and Mechanics Penn State University Michael E. Plesha Department of Engineering Physics University

More information

Bergen Community College Division of Mathematics, Science and Technology Department of Physical Sciences

Bergen Community College Division of Mathematics, Science and Technology Department of Physical Sciences Semester and year: Course Number: Meeting Times and Locations: Instructor: Office Location: Phone: Office Hours: Email Address: Bergen Community College Division of Mathematics, Science and Technology

More information

PELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS CALCULUS III MATH 2110

PELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS CALCULUS III MATH 2110 PELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS CALCULUS III MATH 2110 Class Hours: 4.0 Credit Hours: 4.0 Laboratory Hours: 0.0 Revised: Spring 07 Catalog Course Description: Calculus of

More information

Engineering Statics PHYS 141 University Studies Program. Course Outline

Engineering Statics PHYS 141 University Studies Program. Course Outline Engineering Statics PHYS 141 University Studies Program Course Outline COURSE IMPLEMENTATION DATE: 2012 OUTLINE EFFECTIVE DATE: January 2016 COURSE OUTLINE REVIEW DATE: September 2021 GENERAL COURSE DESCRIPTION:

More information

Upon successful completion of this course, students should be competent to perform the following tasks:

Upon successful completion of this course, students should be competent to perform the following tasks: COURSE PREFIX/NO.: PHY 221 COURSE TITLE: UNIVERSITY PHYSICS LEC HRS/WK: 3.0 LAB HRS/WK: 3.0 CREDIT HRS/SEMESTER: 4.0 Distance Learning Attendance/VA Statement Textbook Information Student Code and Grievance

More information

Course syllabus Engineering Mechanics - Dynamics

Course syllabus Engineering Mechanics - Dynamics Course syllabus Engineering Mechanics - Dynamics COURSE DETAILS Type of study programme Study programme Course title Course code ECTS (Number of credits allocated) Course status Year of study Course Web

More information

0Bergen Community College School of Mathematics, Science and Technology Department of Physical Sciences. Course Syllabus CHM 112 College Chemistry

0Bergen Community College School of Mathematics, Science and Technology Department of Physical Sciences. Course Syllabus CHM 112 College Chemistry 0Bergen Community College School of Mathematics, Science and Technology Department of Physical Sciences Course Syllabus CHM 112 College Chemistry Semester and year: Course Number: Meeting Times and Locations:

More information

PELLISSIPPI STATE COMMUNITY COLLEGE MASTER SYLLABUS NONCALCULUS BASED PHYSICS I PHYS 2010

PELLISSIPPI STATE COMMUNITY COLLEGE MASTER SYLLABUS NONCALCULUS BASED PHYSICS I PHYS 2010 PELLISSIPPI STATE COMMUNITY COLLEGE MASTER SYLLABUS NONCALCULUS BASED PHYSICS I PHYS 2010 Class Hours: 3.0 Credit Hours: 4.0 Laboratory Hours: 3.0 Revised: Spring 2011 Catalog Course Description: This

More information

Physics C: Mechanics

Physics C: Mechanics Physics C: Mechanics 2013 2014 PISCATAWAY TOWNSHIP SCHOOLS COURSE SYLLABUS Mr. Rohan Gokhale rgokhale@pway.org www.piscatawayschools.org/phs Brief Description of Course The AP Physics course is a full

More information

ENGINEERING MECHANICS

ENGINEERING MECHANICS ENGINEERING MECHANICS BASUDEB BHATTACHARYYA Assistant Professor Department of Applied Mechanics Bengal Engineering and Science University Shibpur, Howrah OXJFORD UNIVERSITY PRESS Contents Foreword Preface

More information

Academic Course Description. BHARATH UNIVERSITY Faculty of Engineering and Technology Department of Mechanical Engineering

Academic Course Description. BHARATH UNIVERSITY Faculty of Engineering and Technology Department of Mechanical Engineering BME202 - ENGINEERING MECHANICS Course (catalog) description Academic Course Description BHARATH UNIVERSITY Faculty of Engineering and Technology Department of Mechanical Engineering BME202 - ENGINEERING

More information

ESSEX COUNTY COLLEGE Mathematics and Physics Division PHY 101 College Physics I Course Outline

ESSEX COUNTY COLLEGE Mathematics and Physics Division PHY 101 College Physics I Course Outline ESSEX COUNTY COLLEGE Mathematics and Physics Division PHY 101 College Physics I Course Outline Course Number & Name: PHY 101 College Physics I Credit Hours: 4.0 Contact Hours: 6.0 Lecture/Lab: 6.0 Other:

More information

DEPARTMENT OF MECHANICAL ENGINEERING COURSE DESCRIPTION

DEPARTMENT OF MECHANICAL ENGINEERING COURSE DESCRIPTION DEPARTMENT OF MECHANICAL ENGINEERING COURE DECRIPTION Course Code Course Title : A10302 : ENGINEERING MECHANIC Course tructure : Lectures Tutorials Practical Credits 3 - - 6 Course Coordinator : Dr.D.Govardhan,

More information

PHYSICS 206, Spring 2019

PHYSICS 206, Spring 2019 PHYSICS 206, Spring 2019 Instructor: Gregory Christian Lecture times: TR 9:35 10:50, room MPHY 203 Office: MIST M320 Phone: 979-845-1411 Email: gchristian@tamu.edu Homepage: http://faculty.physics.tamu.edu/christian/teaching.html

More information

Physics 141 Course Information

Physics 141 Course Information Physics 141 Course Information General Physics I - Mechanics Spring 2008 Instructors: Office Hours: Textbook: Online Homework: Disclaimer: Nikos Varelas 2134 SES (312) 996-3415 varelas@uic.edu Charles

More information

SAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ONTARIO COURSE OUTLINE

SAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ONTARIO COURSE OUTLINE SAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ONTARIO COURSE OUTLINE COURSE TITLE: CODE NO. : SEMESTER: 4 PROGRAM: AUTHOR: Aviation Technology - Flight Updated by Douglas McKinnon DATE:

More information

Introduction to Engineering Analysis - ENGR1100 Course Description and Syllabus Tuesday / Friday Sections. Spring '13.

Introduction to Engineering Analysis - ENGR1100 Course Description and Syllabus Tuesday / Friday Sections. Spring '13. Introduction to Engineering Analysis - ENGR1100 Course Description and Syllabus Tuesday / Friday Sections Spring 2013 Back exams, HW solutions, and other useful links can be found at the following website:

More information

San José State University Aerospace Engineering Department AE138: Vector Based Dynamics for Aerospace Applications Fall 2018

San José State University Aerospace Engineering Department AE138: Vector Based Dynamics for Aerospace Applications Fall 2018 San José State University Aerospace Engineering Department AE138: Vector Based Dynamics for Aerospace Applications Fall 2018 Instructor: Office Location: Email: Office Hours: Class Days/Time: Prerequisite:

More information

SAN DIEGO COMMUNITY COLLEGE DISTRICT CITY, MESA, AND MIRAMAR COLLEGES ASSOCIATE DEGREE COURSE OUTLINE

SAN DIEGO COMMUNITY COLLEGE DISTRICT CITY, MESA, AND MIRAMAR COLLEGES ASSOCIATE DEGREE COURSE OUTLINE PHYS 195 CIC Approval: 04/27/2006 BOT APPROVAL: 05/25/2006 STATE APPROVAL: EFFECTIVE TERM: Fall 2006 SECTION I SAN DIEGO COMMUNITY COLLEGE DISTRICT CITY, MESA, AND MIRAMAR COLLEGES ASSOCIATE DEGREE COURSE

More information

Physics 141 Course Information

Physics 141 Course Information Physics 141 Course Information General Physics I - Mechanics Spring 2009 Instructors: Office Hours: Textbook: Online Homework: Disclaimer: Nikos Varelas 2134 SES (312) 996-3415 varelas@uic.edu Adrian Barkan

More information

COWLEY COLLEGE & Area Vocational Technical School COURSE PROCEDURE FOR. GENERAL PHYSICS I PHS Credit Hours

COWLEY COLLEGE & Area Vocational Technical School COURSE PROCEDURE FOR. GENERAL PHYSICS I PHS Credit Hours COWLEY COLLEGE & Area Vocational Technical School COURSE PROCEDURE FOR Student Level: This course is open to students on the college level in the freshman year. Catalog Description: PHS4550 - GENERAL PHYSICS

More information

Uniform Standard for Teaching Foundational Principles in Statics and Dynamics, Momentum Perspective

Uniform Standard for Teaching Foundational Principles in Statics and Dynamics, Momentum Perspective Uniform Standard for Teaching Foundational Principles in Statics and Dynamics, Momentum Perspective C.J. Kobus, Y.P. Chang Department of Mechanical Engineering Oakland University, Rochester, MI 48309 Email:

More information

Montgomery County Community College EGR 203 Engineering Statics 3-2-2

Montgomery County Community College EGR 203 Engineering Statics 3-2-2 Montgomery County Community College EGR 203 Engineering Statics 3-2-2 COURSE DESCRIPTION: This course describes the mechanical behavior of materials and systems in equilibrium using Newton s laws of motion.

More information

PELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS NONCALCULUS BASED PHYSICS I PHYS 2010

PELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS NONCALCULUS BASED PHYSICS I PHYS 2010 PELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS NONCALCULUS BASED PHYSICS I PHYS 2010 Class Hours: 3.0 Credit Hours: 4.0 Laboratory Hours: 3.0 Date Revised: Spring 01 Catalog Course Description:

More information

AP Physics 1. Course Overview

AP Physics 1. Course Overview Radnor High School Course Syllabus AP Physics 1 Credits: Grade Weighting: Yes Prerequisites: Co-requisites: Length: Format: 1.0 Credit, weighted Honors chemistry or Advanced Chemistry Honors Pre-calculus

More information

AP Physics C Liberty High School, Hillsboro, OR (PCC PHY 211 General Physics (Calculus))

AP Physics C Liberty High School, Hillsboro, OR (PCC PHY 211 General Physics (Calculus)) AP Physics C Liberty High School, Hillsboro, OR (PCC PHY 211 General Physics (Calculus)) ACADEMIC YEAR: 2013 2014 See http://www.pcc.edu/prepare/head-start/dual-credit/calendar.html and http://www.pcc.edu/prepare/head-start/dual-credit/documents/studenthandbook.pdf

More information

PELLISSIPPI STATE COMMUNITY COLLEGE MASTER SYLLABUS

PELLISSIPPI STATE COMMUNITY COLLEGE MASTER SYLLABUS PELLISSIPPI STATE COMMUNITY COLLEGE MASTER SYLLABUS COLLEGE ALGEBRA MATH 1130 Class Hours: 3.0 Credit Hours: 3.0 Laboratory Hours: 0.0 Date Revised: Fall 2017 Catalog Course Description: This course is

More information

Co-requisite: University Physics Lab I (PHYS 3013) Requisite: Calculus (MATH 3051 or equivalent)

Co-requisite: University Physics Lab I (PHYS 3013) Requisite: Calculus (MATH 3051 or equivalent) UNIVERSITY OF PUERTO RICO RIO PIEDRAS CAMPUS COLLEGE OF NATURAL SCIENCES DEPARTMENT OF PHYSICS UNDERGRADUATE PROGRAM Title: University Physics I Code: PHYS 3011 Number of Credits: 3 Co-requisite: University

More information

FENG CHIA UNIVERSITY

FENG CHIA UNIVERSITY FENG CHIA UNIVERSITY Fundamentals of Physics I (With Lab) PHYS114, Summer 2018 (May14-Jun15) Lecturer: TBA E-mail: TBA Time: Monday through Friday Contact hours: 60 (50 minutes each) Credits: 4 Office

More information

Department of Mechanical Engineering Course plan

Department of Mechanical Engineering Course plan Faculty of Engineering & Technology, SRM University, Kattankulathur 603203 School of Mechanical Engineering Department of Mechanical Engineering Course plan Course code : ME1002 Date : 19 th December 2013

More information

Mechanics of Material 11/29/2017. General Information

Mechanics of Material 11/29/2017. General Information General Information Assistant Lecturer: Asmaa Ab. Mustafa Email : asmaa.abdulmajeed@ishik.edu.iq Department : Civil Engineering Course Title : Engineering Mechanics I Code : Credit : 2 Office Hour : Monday

More information

Modesto Junior College Course Outline of Record PHYS 142

Modesto Junior College Course Outline of Record PHYS 142 Modesto Junior College Course Outline of Record PHYS 142 I. OVERVIEW The following information will appear in the 2011-2012 catalog PHYS 142 Mechanics, Heat, & Waves 5 Units Formerly listed as: PHYS -

More information

ENGINEERING MECHANICS

ENGINEERING MECHANICS ENGINEERING MECHANICS ENGINEERING MECHANICS (In SI Units) For BE/B.Tech. Ist YEAR Strictly as per the latest syllabus prescribed by Mahamaya Technical University, Noida By Dr. R.K. BANSAL B.Sc. Engg.

More information

AP Physics C : Mechanics Course Syllabus Instructor: Mr. Ronald J. Maniglia

AP Physics C : Mechanics Course Syllabus Instructor: Mr. Ronald J. Maniglia AP Physics C : Mechanics Course Syllabus 2014-2015 Instructor: Mr. Ronald J. Maniglia www.rjmaniglia.org Introduction AP Physics C: Mechanics is an 18-week calculus-based laboratory course concerning kinematics,

More information

BASIC ENGINEERING MECHANICS

BASIC ENGINEERING MECHANICS BASIC ENGINEERING MECHANICS Other titles of interest to engineers An Introduction to Engineering Fluid Mechanics J. A. Fox Principles of Engineering Thermodynamics E. M. Goodger Analysis and Presentation

More information

COURSE OUTLINE General Physics I

COURSE OUTLINE General Physics I Butler Community College Science, Technology, Engineering, and Math Division Robert Carlson Revised Fall 2008 Implemented Spring 2009 Textbook Update Fall 2015 COURSE OUTLINE General Physics I Course Description

More information

EASTERN ARIZONA COLLEGE Physics with Calculus I

EASTERN ARIZONA COLLEGE Physics with Calculus I EASTERN ARIZONA COLLEGE Physics with Calculus I Course Design 2018-2019 Course Information Division Science Course Number PHY 211 (SUN# PHY 1121) Title Physics with Calculus I Credits 5 Developed by Madhuri

More information

ME 022: Thermodynamics

ME 022: Thermodynamics ME 022: Thermodynamics General Information: Term: 2019 Summer Session Instructor: Staff Language of Instruction: English Classroom: TBA Office Hours: TBA Class Sessions Per Week: 5 Total Weeks: 5 Total

More information

Northwestern CT Community College Course Syllabus. Course Title: CALCULUS-BASED PHYSICS I with Lab Course #: PHY 221

Northwestern CT Community College Course Syllabus. Course Title: CALCULUS-BASED PHYSICS I with Lab Course #: PHY 221 Northwestern CT Community College Course Syllabus Course Title: CALCULUS-BASED PHYSICS I with Lab Course #: PHY 221 Course Description: 4 credits (3 class hours and 3 laboratory hours per week) Physics

More information

PELLISSIPPI STATE COMMUNITY COLLEGE MASTER SYLLABUS CALCULUS III MATH 2110

PELLISSIPPI STATE COMMUNITY COLLEGE MASTER SYLLABUS CALCULUS III MATH 2110 PELLISSIPPI STATE COMMUNITY COLLEGE MASTER SYLLABUS CALCULUS III MATH 2110 Class Hours: 4.0 Credit Hours: 4.0 Laboratory Hours: 0.0 Revised: Fall 2012 Catalog Course Description: Calculus of functions

More information

Alabama Department of Postsecondary Education

Alabama Department of Postsecondary Education Adopted: 1980 Reviewed: 1985, 2007 Revised: 1990, 1998, 2001, 2008, 2011 Alabama Department of Postsecondary Education Representing Alabama s Public Two-Year College System Jefferson State Community College

More information

BRAZOSPORT COLLEGE LAKE JACKSON, TEXAS SYLLABUS PHYS MECHANICS AND HEAT

BRAZOSPORT COLLEGE LAKE JACKSON, TEXAS SYLLABUS PHYS MECHANICS AND HEAT BRAZOSPORT COLLEGE LAKE JACKSON, TEXAS SYLLABUS PHYS 2325 - MECHANICS AND HEAT CATALOG DESCRIPTION: PHYS 2325 Mechanics and Heat. CIP 4008015403 A calculus-based approach to the principles of mechanics

More information

Physics 112 for class and recitation WF 10:10 a.m. - 10:40 a.m. or by appointment

Physics 112 for class and recitation WF 10:10 a.m. - 10:40 a.m. or by appointment SYLLABUS (Subject to Modification) PHYS. 4310 Quantum Mechanics Dr. Sandra Quintanilla Office: Physics 309 Spring 2016 email: squintanilla@unt.edu Lecture: MWF 9:00 9:50 a.m. Phone: 565-4739 Recitation:

More information

COURSE OUTLINE. Course Number Course Title Credits MAT251 Calculus III 4

COURSE OUTLINE. Course Number Course Title Credits MAT251 Calculus III 4 COURSE OUTLINE Course Number Course Title Credits MAT251 Calculus III 4 Hours: Lecture/Lab/Other 4 Lecture Co- or Pre-requisite MAT152 with a minimum C grade or better, successful completion of an equivalent

More information

AP Physics C: Mechanics: Syllabus 2

AP Physics C: Mechanics: Syllabus 2 AP Physics C: Mechanics: Syllabus 2 Scoring Components SC1 The course covers instruction in kinematics. 3 SC2 The course covers instruction in Newton s laws of 4 motion. SC3 The course covers instruction

More information

Introduction to Engineering Analysis - ENGR1100 Course Description and Syllabus Monday / Thursday Sections. Fall '10.

Introduction to Engineering Analysis - ENGR1100 Course Description and Syllabus Monday / Thursday Sections. Fall '10. Introduction to Engineering Analysis - ENGR1100 Course Description and Syllabus Monday / Thursday Sections Fall 2010 All course materials are available on the RPI Learning Management System (LMS) website.

More information

Engineering Mechanics Dynamics 7th Edition Si Version

Engineering Mechanics Dynamics 7th Edition Si Version ENGINEERING MECHANICS DYNAMICS 7TH EDITION SI VERSION PDF - Are you looking for engineering mechanics dynamics 7th edition si version Books? Now, you will be happy that at this time engineering mechanics

More information

AP PHYSICS (B) SYLLABUS. Text: Physics, Sixth Edition by Cutnell and Johnson ISBN , Wiley and Sons, 2004 COURSE OVERVIEW

AP PHYSICS (B) SYLLABUS. Text: Physics, Sixth Edition by Cutnell and Johnson ISBN , Wiley and Sons, 2004 COURSE OVERVIEW AP PHYSICS (B) SYLLABUS Text: Physics, Sixth Edition by Cutnell and Johnson ISBN 0471-15183-1, Wiley and Sons, 2004 COURSE OVERVIEW Advanced Placement Physics is an intensive and rigorous college level

More information

COURSE DELIVERY PLAN. Engineering Statics Semester 1

COURSE DELIVERY PLAN. Engineering Statics Semester 1 COURSE DELIVERY PLAN ENT 141 2014/15 Session Engineering Statics Semester 1 Class Schedule (RK24) : Tuesday (2.00pm 4.00pm): BKN6 Thursday (.00pm 4.00pm): BKN6 Tutorial Schedule (RK24) : Monday (11.00am

More information

Mechanics. In the Science Program, Mechanics contributes to the following program goals described in the Exit Profile:

Mechanics. In the Science Program, Mechanics contributes to the following program goals described in the Exit Profile: Mechanics Objectives: 00UR Discipline: Physics Ponderation: 3-2-3 Course Code: 203-NYA-05 Prerequisite: Sec. V Physics 534, Mathematics 536 (or equivalent) Course Credit: 2 2/3 Corequisite: 00UP (Calculus

More information

PELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS MECHANICS & HEAT W/ LAB II PHYS 1320

PELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS MECHANICS & HEAT W/ LAB II PHYS 1320 PELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS MECHANICS & HEAT W/ LAB II PHYS 1320 Class Hours: 3.0 Credit Hours: 4.0 Laboratory Hours: 3.0 Date Revised: Spring 01 Catalog Course Description:

More information

Engineering Mechanics Dynamics 7th Edition Solution Manual Torrent

Engineering Mechanics Dynamics 7th Edition Solution Manual Torrent Engineering Mechanics Dynamics 7th Edition Solution Manual Torrent We have made it easy for you to find a PDF Ebooks without any digging. And by having access to our ebooks online or by storing it on your

More information

CENTRAL TEXAS COLLEGE SYLLABUS FOR MATH 2415 CALCULUS III. Semester Hours Credit: 4

CENTRAL TEXAS COLLEGE SYLLABUS FOR MATH 2415 CALCULUS III. Semester Hours Credit: 4 CENTRAL TEXAS COLLEGE SYLLABUS FOR MATH 2415 CALCULUS III Semester Hours Credit: 4 I. INTRODUCTION A. Calculus III is a continuation course from Calculus II, which includes advanced topics in calculus,

More information

REVIEW. Final Exam. Final Exam Information. Final Exam Information. Strategy for Studying. Test taking strategy. Sign Convention Rules

REVIEW. Final Exam. Final Exam Information. Final Exam Information. Strategy for Studying. Test taking strategy. Sign Convention Rules Final Exam Information REVIEW Final Exam (Print notes) DATE: WEDNESDAY, MAY 12 TIME: 1:30 PM - 3:30 PM ROOM ASSIGNMENT: Toomey Hall Room 199 1 2 Final Exam Information Comprehensive exam covers all topics

More information

Physics 53 Course Syllabus

Physics 53 Course Syllabus Physics 53 Course Syllabus General Course Information Instructor: Robert G. Brown Email address: rgb at phy dot duke dot edu Cell Phone: 919-280-8443 Recitation Instructors: Ying Wu (wu at fel dot duke

More information

Theoretical Mechanics Practicums

Theoretical Mechanics Practicums + ALEKSANDRAS STULGINSKIS UNIVERSITY Faculty of Agricultural Engineering Department of Mechanics Eglė Jotautienė Theoretical Mechanics Practicums KAUNAS - AKADEMIJA 2012 UDK 629.1:631.374 Eglė Jotautienė

More information

Northwestern Connecticut Community College Course Syllabus

Northwestern Connecticut Community College Course Syllabus Northwestern Connecticut Community College Course Syllabus Course Title: Introductory Physics Course #: PHY 110 Course Description: 4 credits (3 class hours and 3 laboratory hours per week) Physics 110

More information

Alabama Department of Postsecondary Education

Alabama Department of Postsecondary Education Adopted: 1980 Reviewed: 1985, 2007, 2011 Revised: 1990, 1998, 2001, 2004, 2008, 2011 Alabama Department of Postsecondary Education Representing Alabama s Public Two-Year College System Jefferson State

More information

SYLLABUS FOR [FALL/SPRING] SEMESTER, 201x

SYLLABUS FOR [FALL/SPRING] SEMESTER, 201x SYLLABUS FOR [FALL/SPRING] SEMESTER, 201x Course Title: College Algebra and Trigonometry Instructor: [Instructor Name] Credit Hours: 5 Office: [Office Location] Course Number: MATH 1340-00x Hours: [Office

More information

SOUTHERN UNIVERSITY and A&M COLLEGE DEPARTMENT OF MATHEMATICS MATH 395 CALCULUS III AND DIFFERENTIAL EQUATIONS FOR JUNIOR ENGINEERING MAJORS

SOUTHERN UNIVERSITY and A&M COLLEGE DEPARTMENT OF MATHEMATICS MATH 395 CALCULUS III AND DIFFERENTIAL EQUATIONS FOR JUNIOR ENGINEERING MAJORS SOUTHERN UNIVERSITY and A&M COLLEGE DEPARTMENT OF MATHEMATICS MATH 395 CALCULUS III AND DIFFERENTIAL EQUATIONS FOR JUNIOR ENGINEERING MAJORS COURSE DESCRIPTION: This course combines selective topics normally

More information

Karadeniz Technical University

Karadeniz Technical University Karadeniz Technical University College of Engineering Department of Mechanical Engineering ME-2005 Dynamics 2018 Fall Semester Instructor: Ömer Necati Cora (Assoc. Prof. Dr.) K.T.Ü Dept. of Mech. Eng.

More information

SAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ONTARIO COURSE OUTLINE

SAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ONTARIO COURSE OUTLINE SAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ONTARIO COURSE OUTLINE COURSE TITLE: CODE NO. : SEMESTER: Two PROGRAM: AUTHOR: Aviation Technology Flight Douglas McKinnon DATE: Jan 2013

More information

STATICS SECOND EDITION

STATICS SECOND EDITION Engineering Mechanics STATICS SECOND EDITION Michael E. Plesha Department of Engineering Physics University of Wisconsin-Madison Gary L. Gray Department of Engineering Science and Mechanics Penn State

More information

Bergen Community College Division of Mathematics, Science and Technology Physical Science Department. Course Syllabus CHM 102 Chemistry in Context

Bergen Community College Division of Mathematics, Science and Technology Physical Science Department. Course Syllabus CHM 102 Chemistry in Context Bergen Community College Division of Mathematics, Science and Technology Physical Science Department Course Syllabus CHM 102 Chemistry in Context COURSE DESCRIPTION: CHM 102 Chemistry in Context is a student-centered

More information

PHYS1021 Stars and Galaxies Summer 2015

PHYS1021 Stars and Galaxies Summer 2015 Professor: Dr. Mark W. Plano Clark Office: Geo/Phys 435 Telephone: (513) 556-0546 Email: Office Hours: Text: Course Description mark.planoclark@uc.edu PHYS1021 Stars and Galaxies Summer 2015 MTWR: 10:00-11:00

More information

SAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ONTARIO COURSE OUTLINE CODE NO. : MCH110 SEMESTER: TWO

SAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ONTARIO COURSE OUTLINE CODE NO. : MCH110 SEMESTER: TWO SAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ONTARIO COURSE OUTLINE COURSE TITLE: APPLIED MECHANICS CODE NO. : SEMESTER: TWO PROGRAM: AUTHOR: DATE: APPROVED: TOTAL CREDITS: PREREQUISITE(S):

More information

PHYS100 General Physics - Mechanics and Thermodynamics Fall

PHYS100 General Physics - Mechanics and Thermodynamics Fall PHYS100 General Physics - Mechanics and Thermodynamics Fall 2014-2015 Assoc. Prof. Dr. O. Özgür Eğilmez Civil Engineering Department Room: A-523 Email: ozgur.egilmez@ieu.edu.tr Phone: (232) 488-8214 Textbook:

More information

Upon completion of the course, the student should be able to:

Upon completion of the course, the student should be able to: Syllabus MAT 106 Calculus I 5 Credit Hours (Lecture) Prerequisites: MAT 105 or Assessment Revision Date: 12/8/2017 Department: Mathematics Course Description: Calculus I is the first in a three-semester

More information

2018 SPRING PHYS 8011 Classical mechanics I (as of Apr. 19/2018) The course syllabus is a general plan for the course; deviations announced to the class by the instructor may be necessary. A FRIENDLY REMINDER:

More information

SAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ONTARIO COURSE OUTLINE CODE NO. : MCH320 SEMESTER: FIVE.

SAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ONTARIO COURSE OUTLINE CODE NO. : MCH320 SEMESTER: FIVE. SAULT COLLEGE OF APPLIED ARTS AND TECHNOLOGY SAULT STE. MARIE, ONTARIO COURSE OUTLINE COURSE TITLE: MACHINE DYNAMICS CODE NO. : SEMESTER: FIVE PROGRAM: AUTHOR: MECHANICAL TECHNOLOGY TOM KATAGIS / KEVIN

More information

TABLE OF CONTENTS. Preface...

TABLE OF CONTENTS. Preface... TABLE OF CONTENTS Preface...................................... xiv 1 Introduction........................................ 1 1.1 Engineering and Statics.............................. 1 1.2 A Brief History

More information

Physics 141: Fall 2013 Course Syllabus

Physics 141: Fall 2013 Course Syllabus Physics 141: Fall 2013 Course Syllabus General Course Information Course Director: Robert G. Brown Email address: rgb at phy dot duke dot edu Cell Phone: 919-280-8443 Recitation Instructors: Stephen Teitsworth

More information

Department: Course Description: Course Competencies: MAT 201 Calculus III Prerequisite: MAT Credit Hours (Lecture) Mathematics

Department: Course Description: Course Competencies: MAT 201 Calculus III Prerequisite: MAT Credit Hours (Lecture) Mathematics Department: Mathematics Course Description: Calculus III is the final course in the three-semester sequence of calculus courses. This course is designed to prepare students to be successful in Differential

More information

Physics Course Syllabus CHS Science Department

Physics Course Syllabus CHS Science Department 1 Physics Course Syllabus CHS Science Department Contact Information: Parents may contact me by phone, email or visiting the school. Teacher: Mr. Joshua Queen Email Address: joshua.queen@ccsd.us or josh.queen@students.ccsd.us

More information

2. a) Explain the equilibrium of i) Concurrent force system, and ii) General force system.

2. a) Explain the equilibrium of i) Concurrent force system, and ii) General force system. Code No: R21031 R10 SET - 1 II B. Tech I Semester Supplementary Examinations Dec 2013 ENGINEERING MECHANICS (Com to ME, AE, AME, MM) Time: 3 hours Max. Marks: 75 Answer any FIVE Questions All Questions

More information