FG 623 Window Wall. Optional Features Integrates with standard Kawneer windows

Size: px

Start display at page:

Download "FG 623 Window Wall. Optional Features Integrates with standard Kawneer windows"

Patience Higgins
6 years ago
Views:

1 JNURY, 0 FTURS Features FG is an inside glazed system -/" sight line with standard " system depth Optional IsoLock TM lanced pour and debridged thermal break Screw spline and shear block fabrication and joinery Infill options of /" and " Silicone compatible glazing materials for long lasting seals Corner members are available for 0 and applications Incorporates expansion verticals as required FG has been large missile impact and cycle tested FG is for stock length sales Permanodic TM anodized finishes in seven choices Painted finishes in standard and custom choices Optional Features Integrates with standard Kawneer windows Product pplications Ribbon windows Ideal for single and multi-lite punched openings For specific product applications, Consult your Kawneer representative.

2 LNK PG JNURY, 0

3 JNURY, 0 INDX rchitects Most extrusion and window types illustrated in this catalog are standard products for Kawneer. These concepts have been expanded and modified to afford you design freedom. Some miscellaneous details are non-standard and are intended to demonstrate how the system can be modified to expand design flexibility. Please contact your Kawneer representative for further assistance. PICTORIL VIW... NON-THRML FRMING DTILS... THRML FRMING DTILS... CORNR DTILS... WIND LOD/DDLOD CHRTS... - THRML CHRTS... - LWS ND UILDING ND SFTY CODS GOVRNING TH DSIGN ND US OF GLZD NTRNC, WINDOW, ND CURTIN WLL PRODUCTS VRY WIDLY. KWNR DOS NOT CONTROL TH SLCTION OF PRODUCT CONFIGURTIONS, OPRTING HRDWR, OR GLZING MTRILS, ND SSUMS NO RSPONSIILITY THRFOR. Metric (SI) conversion figures are included throughout these details for reference. Numbers in parentheses ( ) are millimeters unless otherwise noted. The following metric (SI ) units are found in these details: m meter cm centimeter mm millimeter s second Pa pascal MPa megapascal

4 PICTORIL VIW JNURY, 0

5 JNURY, 0 NON-THRML FRMING DTILS SCL " = '-0" HD -/" (.) /" SYSTM 0 " () 0 LVTION IS NUMR KYD TO DTILS HD -/" (.) " SYSTM " () INTRMDIT HORIZONTL 0 INTRMDIT HORIZONTL 00 SILL " () SILL " () 0 0 JM -/" (.) MULLION -/" (.) XPNSION MULLION JM -/" (.) MULLION -/" (.) XPNSION MULLION

6 THRML FRMING DTILS JNURY, 0 SCL " = '-0" HD LVTION IS NUMR KYD TO DTILS -/" (.) " SYSTM (THRML) " () INTRMDIT HORIZONTL 0 00 SILL 0 0 " () 00 JM -/" (.) MULLION -/" (.) XPNSION MULLION

7 JNURY, 0 CORNR DTILS /" SYSTM " SYSTM (THRML SIMILR) () 0 OUTSID CORNR 0 INSID CORNR () () () OUTSID CORNR INSID CORNR () () () ()

8 WIND LOD / DD LOD CHRTS JNURY, 0 WIND LOD CHRTS Mullions are designed for deflection limitations in accordance with M TIR- of L/ up to '-" and L/0 +/" above '-". These curves are for mullions WITH HORIZONTLS and are based on engineering calculations for stress and deflection. llowable wind load stress for LUMINUM, psi (0 MPa), STL 0,000 psi (0 MPa). Charted curves, in all cases are for the limiting value. Wind load charts contained herein are based upon nominal wind load utilized in allowable stress design. conversion from Load Resistance Factor Design (LRFD) is provided. To convert ultimate wind loads to nominal loads, multiply ultimate wind loads by a factor of 0. per SC/SI. / increase in allowable stress has not been used to develop these curves. For special situations not covered by these curves, contact your Kawneer representative for additional information. DD LOD CHRTS Horizontal or deadload limitations are based upon /" (.), maximum allowable deflection at the center of an intermediate horizontal member. The accompanying charts are calculated for " (.) thick insulating glass or /" (.) thick glass supported on two setting blocks placed at the loading points shown.

9 JNURY, 0 WIND LOD CHRTS WITH HORIZONTLS C D MULLION HIGHT IN MTRS llowable Stress Design Load LRFD Ultimate Design Load = 0 PSF (0) PSF (0) = 0 PSF (0) 0 PSF (00) C = 0 PSF (0) PSF (00) D = 0 PSF (00) PSF (000) = 0 PSF (0) 00 PSF (0) 0 I =.0 ( x 0 ) S =. ( x 0 ) WITHOUT HORIZONTLS C 0.0 D MULLION HIGHT IN MTRS WITH HORIZONTLS WITHOUT HORIZONTLS C D MULLION HIGHT IN MTRS 00 I =. ( x 0 ) S =. ( x 0 ) C.0 D MULLION HIGHT IN MTRS

10 0 WIND LOD CHRTS JNURY, 0 WITH HORIZONTLS C. D MULLION HIGHT IN MTRS llowable Stress Design Load LRFD Ultimate Design Load = 0 PSF (0) PSF (0) = 0 PSF (0) 0 PSF (00) C = 0 PSF (0) PSF (00) D = 0 PSF (00) PSF (000) = 0 PSF (0) 00 PSF (0) 0 I =.0 ( x 0 ) S =. ( x 0 ) WITHOUT HORIZONTLS C D MULLION HIGHT IN MTRS WITH HORIZONTLS C. D MULLION HIGHT IN MTRS 0 / 0 I =. ( x 0 ) S =. ( x 0 )

11 JNURY, 0 WIND LOD CHRTS WITH HORIZONTLS C. 0 D.0..0 MULLION HIGHT IN MTRS llowable Stress Design Load LRFD Ultimate Design Load = 0 PSF (0) PSF (0) = 0 PSF (0) 0 PSF (00) C = 0 PSF (0) PSF (00) D = 0 PSF (00) PSF (000) = 0 PSF (0) 00 PSF (0) 0 / 0 I =.0 ( x 0 ) S =. ( x 0 ) WITH HORIZONTLS C D.0..0 MULLION HIGHT IN MTRS / I =. ( x 0 ) S =. ( x 0 )

12 DD LOD CHRTS JNURY, 0 (" INFILL) WIDTH IN MTRS = / POINT LODING = / POINT LODING 0 0 WIDTH IN FT HIGHT IN FT HIGHT IN MTRS

13 JNURY, 0 Project Specific U-Factor xample Calculation THRML CHRTS '-0" D.L.O. '-" Frame Width '-0" '-0" D.L.O. D.L.O. xample Glass U-Factor = 0. tu/hr x ft x F Total Daylight Opening = (' x ') + (' x ') = ft Total Projected rea = (Total Daylight Opening + Total rea of Framing System) = '-" x '-" =. ft Percent of Glass = (Total Daylight Opening Total Projected rea) = (.)00 = % '-" Frame Height System U-Factor vs Percent of Glass rea 0.0 COG U-Factor XMPL (Not For Design) % 0 0 Vision rea / Total rea % 0 ased on % glass and center of glass U-Factor of 0. System U-Factor is equal to 0. tu/hr x ft x F

14 THRML CHRTS System U-Factor vs Percent of Glass rea JNURY, COG U-Factor System U-Factor (tu/hr x ft x F) Vision rea / Total rea % Notes for System Y-Factor, Shgc and VT charts: For glass values that are not listed, linear interpolation is permitted. Glass properties are base on center of glass values and are obtained from your glass supplier.

15 JNURY, 0 THRML CHRTS COG SHGC System Solar Heat Gain Coefficient (SHGC) vs Percent of Vision rea 0 0 Vision rea / Total rea % (Total Daylight Opening / Projected rea) System SHGC Charts are generated per M 0 Visible Transmittance (VT) vs Percent of Vision rea COG VT System VT Vision rea / Total rea % (Total Daylight Opening / Projected rea)

16 THRML PRFORMNC MTRIX (NFRC SIZ) JNURY, 0 Thermal Transmittance (TU/hr ft F) Glass U-Factor Overall U-Factor NOT: For glass values that are not listed, linear interpolation is permitted.. U-Factors are determined in accordance with NFRC 00.. SHGC and VT values are determined in accordance with NFRC 00.. Glass properties are based on center of glass values and are obtained from your glass supplier.. Overall U-Factor, SHGC, and VT Matricies are based on the standard NFRC specimen size of,000 mm wide by,000 mm high (-/" by -/"). SHGC Matrix Visible Transmittance Glass SHGC Overall Glass U-Factor Glass VT Overall VT

Trifab TM 451UT Framing System 1

Trifab TM 451UT Framing System 1 FRURY, 0 - Trifab TM UT Framing System Kawneer ompany, Inc., 0 Features Trifab TM UT is -/" (.) deep with a " (0.) sightline enter Plane glass applications Flush glazed from either the inside or outside