Computational Methods, Tools, and Data for Nuclear Analyses of Fusion Technology Systems
|
|
- Joella Byrd
- 6 years ago
- Views:
Transcription
1 International Conference Nuclear Energy for New Europe 2006 Portorož, Slovenia, September 8-2, Computational Methods, Tools, and Data for Nuclear Analyses of Fusion Technology Systems Ulrich Fischer Association FZK-Euratom, Forschungszentrum Karlsruhe Hermann-von-Helmholtz-Platz, D Eggenstein-Leopoldshafen, Germany ABSTRACT An overview is presented of the Research & Development work conducted at Forschungszentrum Karlsruhe in co-operation with other associations in the framework of the European Fusion Technology Programme on the development and qualification of computational tools and data for nuclear analyses of Fusion Technology systems. The focus is on the development of advanced methods and tools based on the Monte Carlo technique for particle transport simulations, and the evaluation and qualification of dedicated nuclear data to satisfy the needs of the ITER and the IFMIF projects. INTRODUCTION The availability of qualified computational tools and nuclear data for the neutron transport simulation and the calculation of relevant nuclear responses is a pre-requisite to enable reliable design calculations for nuclear facilities. A well-qualified nuclear database and validated computational tools are thus required for quality assured neutronics and activation calculations including uncertainty assessments. Accordingly the international efforts in the field of fusion nuclear technology focus on the development and qualification of computational tools and data required for design analyses of the next step fusion devices ITER, the International Thermonuclear Experimental reactor [] and IFMIF, the International Fusion Material Irradiation Facility [2]. The objective of this paper is to present an overview of the related Research & Development work conducted at Forschungszentrum Karlsruhe in co-operation with other associations in the framework of the European Fusion Technology Programme. The focus is on the development of advanced methods and tools based on the Monte Carlo technique for particle transport simulations, and the evaluation and qualification of dedicated nuclear data to satisfy the needs of the ITER and the IFMIF projects. In the following these methods, tools and data are described, various applications examples and results of validation analyses are given. 2 COMPUTATIONAL METHODS AND TOOLS The Monte Carlo method is the standard computational technique for particle transport simulations in fusion technology applications. It allows such a flexible and ease geometry representation that any complex fusion device can be modelled in full 3D geometry without 5.
2 005.2 the need for real approximations. The nuclear interaction cross-sections can be used in continuous energy representations as given in the nuclear data files. The accuracy of the calculation thus is affected only by the statistical uncertainty of the calculation itself and the uncertainties of the underlying nuclear cross section data. To satisfy specific needs for the design and analysis of fusion devices such as ITER dedicated methods and computational tools are required though. 2. Monte Carlo Based 3D Shut-down Dose Rate Calculations For safe operation and maintenance of nuclear fusion facilities it is important to be able to predict the induced activation and the resulting shutdown dose rates. This requires a suitable system of codes, data and interfaces which is capable of simulating both the neutron induced material activation during operation and the decay gamma radiation transport after shutdown in full three-dimensional geometry. Such a system, called the rigorous 2 - step (R2S) system [3], has been developed for shutdown dose rate analyses of ITER. The R2S system is based on the use of the MCNP [4] transport and the FISPACT [5] inventory codes linked through a suitable coupling scheme for the automated routing of decay gamma source and neutron flux spectrum distributions. The R2S approach has been validated on the basis of a benchmark experiment on an ITER shield blanket mock-up performed at the Frascati 4 MeV neutron generator (FNG) [6]. In this experiment, a material assembly made of stainless steel and water-equivalent material has been irradiated with a total of MeV neutrons. The shutdown dose rates have been measured inside a cavity of the assembly at cooling times ranging from h to 20 days after irradiation [7]. Calculated and measured shutdown dose rates are compared in Fig. a. An overall satisfactory agreement was obtained over the considered range of decay times. Further benchmarking was considered necessary by utilizing, as much as possible, a real fusion device with a plasma volume source such as the JET tokamak. Benchmark tests on JET were first made by means of comparison calculations with the direct one step (DS) approach [8]. This method is based on the assumption that a radioactive nuclide generated during irradiation spontaneously emits the associated decay photons. Neutron and decay photon transport then can be treated in one single Monte Carlo calculation run. When calculating the dose rate, correction factors are applied to account for the proper decay rate of a radioactive nuclide. The shut-down dose rates were calculated for different positions inside and outside the vessel and in the torus hall assuming a representative irradiation scenario. The R2S and DS results of this calculational benchmark showed agreement within ± 25 % [9]. This was considered satisfactory taking into account the very different approaches. The outcome of the calculational benchmark suggested a more realistic benchmark exercise on JET. The real irradiation history of D-T and D-D campaigns conducted at JET during the years (DTE ) were used to calculate the shut-down doses at four different locations (positions -4, inside the machine, on the torus hall floor, in contact with the upper coil, in contact with the machine structure) and three different irradiation histories (labelled #, 9 and 5) with different decay times. The two computational procedures gave results that in general agree with the available measurements within a factor 2 to 3 as shown in Figs. b - d. The comparison was constrained, however, by the rather high uncertainties of the available experimental data recorded by the JET Health Physics team as part of the regular monitoring programme under not well defined conditions. It was thus concluded that a dedicated experiment on JET need to be conducted for the benchmarking. This is currently underway.
3 005.3 Calculation / Experiment,20,5,0,05,00 0,95 0,90 0,85 0,80 0,75 Shutdown dose rate 30 h FNG irradiation.95 E+5 neutrons Experimental uncertainty C/E ratio 0 DS R2S Position 2 (floor) 0,70 0,65 R2S calculation (FENDL-2/A+MC) DS calculation (FENDL-2/A) 0, Cooling time [s] Fig. a: FNG irradiation experiment DS R2S Position 3 (upper coil) 0, 9 Irradiation history Fig. b: JET dose rate benchmark (pos. 2) 0 DS R2S 5 Position 4 (structure) C/E ratio C/E ratio 0, 0, 9 5 Irradiation history Fig.c: JET dose rate benchmark (position 3) 0,0 Irradiation history Fig.d: JET dose rate benchmark (position 4) 9 5 Figures a-d: Comparison of calculated (C) and experimental (E) dose rates obtained for the ITER shut down dose rate experiment at FNG and different positions and irradiation histories at JET. 2.2 CAD Interface for the Monte Carlo Code MCNP The Monte Carlo technique enables the use of full and detailed 3D geometry models in neutronics calculations. The manual modelling of a complex geometry with a Monte Carlo code, as it is common practice, is an extensive, time-consuming and error-prone task. A more efficient way is to make use of available CAD geometry data in the Monte Carlo calculations. This can be achieved by converting the CAD data into the semi-algebraic representation used by Monte Carlo codes such as MCNP. Suitable conversion algorithms have been previously developed [0] and have been implemented into an interface programme with a graphical user interface (GUI) called McCAD []. The McCAD interface programme integrates a CAD kernel, a C++ GUI application framework, and the conversion algorithm. The CAD kernel provides core data structures, algorithms, and data exchange interfaces for neutral CAD data files such as IGES and STEP. The GUI framework provides data structures for visualization and user operations. McCad is also capable of generating a CAD geometry model from an MCNP input deck. The typical McCAD processing flow is as follows. A geometry model, suitable for neutron transport calculations, is generated with a CAD system. The suitability is determined by the inherent limitations of MCNP with regard to the geometry representation and the adequacy of the model for the neutron transport with regard to complexity. In particular, the
4 005.4 CAD geometry model must be constructed in the boundary representation (B-rep) with algebraic boundary supports such as planes, quadrics and tori, and no free-form surfaces. The only limitation from the algorithmic point of view is that the model should represent a manifold solid, or a collection or an assembly of solids, described in a B-rep data structure. The CAD model is transferred to the interface via data files in the IGES (version 5.3) or STEP neutral format. Both file formats are able to transform B-rep data structures accurately. McCAD then performs automatically model suitability and error checks, and, if possible, repairs. Suitability checks are limited to geometric properties, i.e., the check if the boundary supports are algebraic. Geometrical and topological errors are checked for gaps and overlaps between boundary entities as well as small boundary entities. The next step is then the conversion of the data which is followed by checks for overlaps among solids and their repair. Finally, the model is completed by voids and output in the standard MCNP syntax. This file can be used directly used by MCNP after completion with other required data such as materials specifications, cross section data, source definition, and tally specifications etc. Successful test applications have been performed for an octant of JET [2] and, more recently, for a 40 degree torus sector of ITER [3] demonstrating the capability for the automated processing of the CAD data and their conversion into a geometry model for Monte Carlo calculations with the MCNP code. Current design applications include the generation and use of MCNP models for the Electron Cyclotron Resonance Heating (ECRH) in the upper port of ITER. As an example, Fig. 2a shows the CAD model of the 40 degree ITER torus sector consisting of all components relevant for the neutronic analyses. Starting from a CAD geometry model provided by the ITER International Team, Garching, this model was elaborated at FZK with the CATIA V5 software following the guidelines for the generation of CAD neutronics models. The converted MCNP model, generated automatically by McCAD, is shown in Fig. 2b in a vertical cut as provided by the MCNP geometry plotter. It is noted that the conversion process does not introduce any approximations. Fig. 2a: CAD model of ITER 40 torus sector (CATIA V5) Fig. 2b: Converted MCNP model (2D radialpoloidal cut by MCNP plotter)
5 005.5 The converted geometry was first checked by means of volume comparison calculations for the CAD and the converted models. The volumes of the CAD model could be well reproduced by stochastic MCNP volume calculations using the converted model thus confirming the proper working of the conversion process. A series of transport calculations was next performed starting with the calculation of the neutron wall loading distribution [3]. Further validation calculations including neutron flux and nuclear heating calculations are currently underway in the frame work of a related ITER benchmark exercise. 2.3 D- Li Neutron Source Generation and Transport Simulation The IFMIF facility will provide an accelerator based D-Li neutron source for high fluence test irradiations of fusion reactor candidate materials. In the IFMIF lithium target, neutrons are generated through the d-li stripping reaction and various other reaction mechanisms. The neutron source generation must be represented accordingly in the neutron transport calculation. The McDeLicious Monte Carlo code [4] was developed along this guideline to simulate in the transport calculation the neutron generation on the basis of evaluated d + 6,7 Li cross sections. A first set of d + 6,7 Li cross section data was evaluated previously in a collaboration of Forschungszentrum Karlsruhe and INPE Obninsk [5]. Tests against thick lithium target experiments showed good agreement for the total and forward neutron yields [6]. Recent measurements of double-differential d+ 6,7 Li cross sections revealed, however, severe deficiencies of the neutron angular distributions and the inability to properly represent the population of residual nucleus excited levels. These results initiated an effort to re-evaluate the d + 6,7 Li cross section data applying a new methodology which takes into account compound nucleus reactions, pre-equilibrium processes, stripping and direct interactions [7]. Fig. 4 shows, as an example, the calculated double-differential neutron emission cross section and its breakdown into the different reaction components for 40 MeV incident deuterons. A series of benchmark calculations was performed with the McDeLicious code to test the new data against experimental thick Lithium target neutron yields. The comparison of measured and calculated forward neutron yields, Fig. 5, shows that McDeLicious with the updated d-li cross section data is well able to reproduce the experimental results over the entire deuteron energy range from threshold up to 40 MeV. The approaches of McDeLi [9], the predecessor to McDeLicious, and the MCNPX code [20] using the ISABEL intra-nuclear cascade model, give significant worse agreement with the experimental neutron yields. d2σ/dω/de [mb/sr MeV] Baba, 03 evaporation preequilibrium stripping level 2 level 3 level 4 level 5 level total Li(d,xn), E d =40 MeV Emitted neutron energy [MeV] θ=0 ο Fig. 4: Measured [8] and evaluated 7 Li(d,xn) double differential neutron emission cross section for 40 MeV deuterons. Neutron Yield, 0 0 /sr/μc Forward Yield (Θ = 0 o ) McDeLicious McDeLi MCNPX - Daruga 68 - Weaver 72 - Goland 75 - Amols 76 - Nelson 77 - Lone 77 - Salmarsh 77 - Johnson 79 - Sugimoto 95 - Bem 02 - Baba 0/ Deuteron Energy [MeV] Fig. 5: Measured and calculated thick lithium target forward neutron yields
6 005.6 The comparison of McDeLicious calculations for neutron angular differential yields using the new d-li evaluation showed that the angular dependence can be satisfactorily predicted over the whole range of measured deuteron energies and secondary neutron angles [7]. The other two approaches show again a worse reproduction of the experimental data set, especially below 20 MeV. The comparison of McDeLicious calculations with measured double-differential thick target neutron yields demonstrates also significant improvements achieved with the updated d-li evaluation. Thus a clear improvement of the prediction accuracy was obtained for the IFMIF neutron source term simulation with McDeLicious employing the new d + 6,7 Li cross section data evaluations. 2.4 Coupled Monte Carlo - Discrete Ordinates Computational Scheme for 3D Shielding Calculations Shielding calculations of advanced nuclear facilities such as the IFMIF neutron source are complicated due to their complex geometries and their large dimensions, including bulk shields of several meters thickness. To better handle such kinds of shielding problems, a dedicated computational approach for coupled Monte Carlo deterministic transport calculations has been developed [2, 22]. The Monte Carlo technique is used to simulate the particle generation and transport in and around the neutron source region involving complex geometries while the discrete ordinates method is used to treat the deep penetration problem in the bulk shield. To enable the coupling of these two different computational methods, a mapping approach has been developed for calculating the discrete ordinates angular flux distribution from the scored data of the Monte Carlo particle tracks crossing a specified surface. The approach has been implemented in an interface programme linking the Monte Carlo code MCNP/McDeLicious and the 3D discrete ordinates code TORT of the DOORS3.2 code package [23]. Fig. 5a: Combined MC/S N geometry model Fig. 5b: Dose rate distribution in the access/maintenance room For IFMIF shielding calculations, this approach enables e. g. the use of the detailed geometry model of the test cell in the Monte Carlo calculation along with a proper representation of the D-Li neutron source through the use of the McDeLicious code with the associated d + Li cross-section data. The geometrical model for the coupled MC/S N
7 005.7 calculation comprises two parts: the test cell with the D-Li neutron source for the Monte Carlo simulation and the maintenance/access room for the S N calculations (Fig. 5a). The thick concrete wall between the test cell and the maintenance/access room is included in both the Monte Carlo and the S N mesh model. The dose rate distribution was assessed across the 3m thick back wall of the test cell and in the maintenance/access room by calculating the neutron and photon flux distributions at IFMIF full power operation. The three-dimensional dose rate distribution obtained for the access/maintenance room is shown in Fig. 5b for the case of a horseshoe-type shield arranged around the test modules. The dose rate is dominated by the neutron radiation and attenuates more than 9 orders of magnitude across the back wall. At the rear of the back wall the dose rate is around 5 μsv/h at maximum which is well below the design limit of 00 μsv/h for work personnel access. 2.5 Monte Carlo Based Sensitivity/Uncertainty Calculations Sensitivity and uncertainty analysis is a powerful means to assess uncertainties of nuclear responses in neutron transport calculations and track down them to specific nuclides, reaction cross-sections and energy ranges. A method to calculate sensitivities of Monte Carlo point detector responses has been previously developed [24] and implemented in a local version of MCNP4C, called MCSEN. This method has been extended to include sensitivities to secondaries angular distributions (SAD) [25]. The Monte Carlo based calculation of uncertainties of nuclear responses in the Test Blanket Modules (TBM) of ITER requires the capability to calculate sensitivities for responses by the track length estimator. Suitable algorithms based on the differential operator method were developed to this end and implemented in MCSEN code. This enables the efficient calculation of sensitivities for neutron fluxes and nuclear responses such as reaction rates in a geometry cell of an arbitrary 3D geometry. Sensitivities can be calculated to reaction cross sections, the material density and secondaries angular distributions. Verification tests were performed by comparing the sensitivities calculated with the track length estimator in a cell and sensitivities calculated by the point detector. In a first real application, a sensitivity/uncertainty analysis was performed for the neutronics experiment on a mock-up of the HCPB (Helium-Cooled Pebble Bed) TBM employing the track length estimator feature of MCSEN [26]. The dominant tritium production from 6 Li, e. g. was shown to be mainly sensitive to the Be cross-sections for the elastic scattering (.7 2. %/%) and the (n,2n) reaction (0.7 %/%). The uncertainties of the total tritium production (TPR) due to uncertainties of the reaction cross-sections are at 4% (2σ confidence level) and are dominated by the 9 Be uncertainties. The total TPR uncertainties including the data uncertainties, the statistical uncertainties of the Monte Carlo calculation and the experimental uncertainties are in the order of 8 to 0 % (2σ), see Table. Table : Total uncertainties (2σ) of expected TPR in the HCPB TBM mock-up Stack Stack 3 Stack 5 Stack 7 Calculation MC calculations 2.6% 2.8% 3.3% 4.2% Data uncertainty 3.5% 4.3% 4.0% 3.5% Calculation + data uncertainty 4.4% 5.2% 5.2% 5.5% Experiment Neutron source uncertainty 6.0% 6.0% 6.0% 6.0% Measurement uncertainty 3.2% 5.% 4.8% 5.2% Total uncertainty (exp. + calc. + data) 8.% 9.4% 9.3% 9.6%
8 NUCLEAR DATA FOR FUSION TECHNOLOGY The nuclear design of fusion devices relies on the results of neutron and photon transport calculations to provide the neutron/photon flux spectra which form the basis for the calculation of nuclear responses of interest when convoluted with related nuclear data. Appropriate and qualified computational simulations are thus required to ensure that the nuclear responses are reliable. These in turn require appropriate computational tools for the neutron transport simulation along with well qualified nuclear data both for the neutron transport and nuclear responses. 3. Nuclear data evaluations and libraries Various efforts have been conducted on the development of dedicated fusion nuclear data libraries, notably in the European Union (European Fusion File, EFF) and in Japan (JENDL-FF, Japanese Evaluated Nuclear Data Library Fusion File), see e. g. [27] for an overview. A major international effort was led by the IAEA/NDS when launching the FENDL (Fusion Evaluated Nuclear Data Library) project [28]. The most recent version of the data library, FENDL-2. [29], has been adopted as current reference data library for ITER design applications. In the frame of the EFF project of European Fusion Programme, general purpose data evaluations have been prepared for 9 Be, 28 Si, 46,47,48,49,50 Ti, nat V, 52 Cr, 56 Fe, and 58, 60 Ni including covariance data up to 20 MeV. These EFF evaluations are included in the Joint Evaluated Fission and Fusion File JEFF-3. [30]. General purpose data evaluations up to 50 MeV were performed for the stable tungsten isotopes 82,83,84,86 W [3] and 8 Ta [32]. These are currently being complemented by covariance data. 3.2 Validation experiments and analyses Testing and validation are essential in the process of assuring the quality assurance of the nuclear data evaluations for application calculations. This is achieved through integral benchmark experiments and their computational analyses both for transport and activation experiments. The current focus of the experimental benchmark effort in the EU is on neutronics TBM mock-ups. The first experiment of this kind has been performed at FNG on a TBM mock-up of the HCPB breeder blanket to check and validate the capability of the neutronic codes and nuclear data to predict its tritium production capability [33]. The mock-up replicates the main characteristics of a breeder insert of the TBM HCPB in ITER. It consists of a stainless steel box with outer dimensions of 3x3x29 cm, filled by alternating layers of breeder material (Li 2 CO 3 ) and neutron multiplier (Be), see Fig. 6 for the MCNP model. The tritium generated during irradiation in a series of Li 2 CO 3 pellets located at different penetration depths in the mock-up was found to be underestimated by the calculations by 5 to 0% on average independent on the nuclear data used, see Figs. 7 a, b for pellet stacks & 2 and 7 & 8 located in the front and the back of the assembly, respectively. The obtained results indicate that design calculations for the tritium breeding ratio (TBR) of fusion power reactors employing a HCPB type breeder blanket are conservative. Thus an additional TBR margin is provided which allows compensating for potential other uncertainties.
9 005.9 pellet position n a Figure 6: MCNP model of the TBM-HCPB mock-up. Vertical cut through the center of the block, showing the two sets of symmetrical detector pellet stacks TUD ENEA Stack /2 EFF.0.05 TUD ENEA Stack 7/8 EFF Calculation/Experiment Calculation/Experiment JAEA n m l i h g f e d c b a Pellet # 0.75 n m l i h g f e d c b a Pellet # Fig. 7a: Pellet stacks & 2 Fig. 7b: Pellet stacks 7 & 8 Figures 7a,b: Ratios of calculated (C) and experimental (E) tritium activities measured in the pellets of stack numbers & 2 and 7 & 8. 4 SUMMARY AND CONCLUSIONS An overview has been presented of the R&D work conducted at Forschungszentrum Karlsruhe in co-operation with other associations in the framework of the European Fusion Technology Programme on the development and qualification of computational tools and data for nuclear analyses of Fusion Technology systems. The focus has been on various advanced methods and tools based on the Monte Carlo technique for particle transport simulations, and the evaluation and qualification of dedicated nuclear data developed to satisfy the needs of the ITER and the IFMIF projects.
10 005.0 ACKNOWLEDGMENTS This work, supported by the European Communities under the contract of Association between EURATOM and Forschungszentrum Karlsruhe, was carried out within the framework of the European Fusion Development Agreement. REFERENCES [] Y. Shimomura, The present status and future prospects of the ITER project, J. Nucl Mat , 5- (2004) [2] IFMIF International Team, IFMIF Comprehensive Design Report, January 2004 [3] Y. Chen, U. Fischer, Rigorous MCNP based shutdown dose rate calculations: Computational scheme, verification calculations and applications to ITER, Fus. Eng. Des (2002), 07-4 [4] J. F. Briesmeister (ed.), MCNP - A General Monte Carlo N-Particle Transport Code, Version 4C, Los Alamos National Laboratory, Report LA-3709-M, April 2000 [5] R. A. Forrest, J-Ch. Sublet, FISPACT 99: User Manual, UKAEA Fusion, Report UKAEA FUS 407, December 998 [6] P. Batistoni, M. Angelone, L. Petrizzi, M. Pillon, Benchmark Experiment for the Validation of Shut-Down Activation and Dose Rate in a Fusion Device, J. Nucl. Sci. Techn., Suppl. 2, p (2002) [7] K. Seidel, Y. Chen, U. Fischer, H. Freiesleben, D. Richter, S. Unholzer, Measurement and Analysis of Dose Rates and Gamma-Ray Fluxes in an ITER Shut-down Dose Rate Experiment, Fus. Eng. and Des (2002), 2-25 [8] H. Iida, D. Valenza, R. Plentada, R., Santoro, Radiation Shielding for ITER to allow for Hands-on Maintenance, J. Nucl. Sci. Techn,. Sup. (March 2000), [9] L. Petrizzi, P. Batistoni, U. Fischer, M. Loughlin, P. Pereslavtsev, R. Villari, Benchmarking of Monte Carlo Based Shutdown Dose Rate Calculations for Applications to JET, Radiation Protection Dosimetry 5(2005), [0] H. Tsige-Tamirat, On the use of CAD geometry for Monte Carlo particle transport, Proc. of the Monte Carlo 2000 conference, Lisbon October 2000, p. 5. [] H. Tsige-Tamirat, U. Fischer, CAD Interface for Monte Carlo Particle Transport Codes. The Monte Carlo Method: Versatility Unbounded in a Dynamic Computing World ; Proc.of the Conf., Chattanooga, Tenn., April 7-2, 2005, La Grange Park, ANS, 2005 [2] H. Tsige-Tamirat, U. Fischer, P. Carman, M. Loughlin, Automatic generation of a JET 3D neutronics model from CAD geometry data for Monte Carlo calculations, Fus. Eng. Des (2005), [3] H. Tsige-Tamirat, U. Fischer, A. Serikov, S. Stickel, Automatic Generation and Validation of an ITER Neutronics Model from CAD Data, 24 th Symposium on Fusion Technology, Warsaw, Poland, September -5, [4] S. P. Simakov, U. Fischer, U. von Möllendorff, I. Schmuck, A. Konobeev, P. Pereslavtsev, Advanced Monte Carlo Procedure for the D-Li Neutron Source Term Based on Evaluated Cross-Section Files, J. Nucl. Mat (2002), [5] A. Konobeev, Yu. Korovin, P. Pereslavtsev, U. Fischer, U. von Möllendorff, Development of Methods for Calculation of Deuteron-Lithium and Neutron-Lithium Cross Sections for Energies up to 50 MeV, Nucl. Sci. Eng. 39 (200),. [6] U. Fischer, S.P. Simakov, U. von Möllendorff, P. Pereslavtsev, P., Bem, P.P.H. Wilson, Validated Computational Tools and Data for IFMIF Neutronic Calculations, AccApp'03 ANS Embedded Topical Meeting, San Diego, CA, June -5, 2003.
11 005. [7] U. Fischer, M. Avrigeanu, P. Pereslavtsev, S.P. Simakov, I. Schmuck, Evaluation and Validation of D-Li Cross-Section Data for the IFMIF Neutron Source Term Simulation, 2th Int. Conf. on Fusion Reactor Materials (ICFRM-2), December 4 9, 2005, Santa Barbara, California, USA (to appear in J. Nucl. Materials). [8] M. Hagiwara, M. Baba, N. Kawata, N. Hirabayashi, T. Itoga., Measurements of Neutron Emission Spectra and the 7Be Production in Li(d,n) and Be(d,n) for 25 and 40 MeV deuterons, JAERI Nuclear Data Symposium, December [9] P.P.H. Wilson, Neutronics of the IFMIF neutron source: Development and Analysis. Report FZKA 628, Karlsruhe 999 [20] L. S. Waters (Ed), MCNPX User s Manual Version 2..5, available from [2] Y. Chen, Coupled Monte Carlo-Discrete Ordinates Computational Scheme for Three- Dimensional Shielding Calculations of Large and Complex Nuclear Facilities, Forschungszentrum Karlsruhe, FZKA 7075, April 2005 [22] Y. Chen, U. Fischer, Program system for three-dimensional coupled Monte Carlo- Deterministic shielding analysis with application to the accelerator-based IFMIF neutron source, Nuclear Instruments and Methods in Physics Research Section A, Volume 55, Issues 2-3 (2005 ), [23] DOORS 3.2, One-, Two- and Three-Dimensional Discrete Ordinates Neutron/Photon Transport Code System, RSICC Computer Code Collection, CCC-650, (998). [24] R. L. Perel, J. J. Wagschal, Y. Yevein, Monte Carlo Calculation of Point-Detector Sensitivities to Material Parameters, Nucl. Sci. Eng., 24 (996), [25] R. L. Perel, Monte Carlo Calculation of Sensitivities to Secondaries Angular Distributions, Nucl. Sci. Eng. 43 (2003), 2-3. [26] D. Leichtle, U. Fischer, I. Kodeli, R. L. Perel et al, Sensitivity and Uncertainty Analyses of the Tritium Production in the HCPB Breeder Blanket Mock-up Experiment, 24th Symposium on Fusion Technology, Warsaw, Poland, September -5, [27] U. Fischer, P. Batistoni, E. Cheng, R. A. Forrest, T. Nishitani, Nuclear Data for Fusion Energy Technologies: Requests, Status and Development Needs, Int. Conf, on Nuclear Data for Science and Technology, Santa Fe, NM, September 26-October, 2004, AIP Conference Proceedings Vol. 769, Melville New York 2005, pp [28] D. Muir, S. Ganesan, FENDL a reference nuclear data library for fusion applications, Int. Conf. Nucl. Dat. Sci. Techn., Jülich, May 3-7, 99. [29] D. L. Aldama, A.Trkov, FENDL-2.: Update of an evaluated nuclear data library for fusion applications, Report INDC(NDS)-467, December [30] A.J. Koning, R. Jacqmin, R. Forrest, O. Bersillon, P. Rullhusen, A. Nouri and M. Kellett, Status of the JEFF nuclear data library, AIP Conf Proc. 769 (2005) 77, Int. Conf. on Nuclear Data for Science and Technology, Santa Fe, 26. Sept. -. Oct. 2004, USA, and NEA Data Bank, JEFF Report 9 (to be published) [3] P. Pereslavtsev, U. Fischer, Evaluation of n + W cross section data up to 50 MeV neutron energy, AIP Conf Proc. 769 (2005) 77, Int. Conf. on Nuclear Data for Science and Technology, Santa Fe, 26. Sept. -. Oct. 2004, USA. [32] P. Pereslavtsev, U. Fischer, Neutron Cross Section Data Evaluation for Ta-8 up to 50 MeV, Nuclear Inst. and Methods in Physics Research, B, Vol 248/2, [33] P. Batistoni et al., Neutronics experiment on a HCPB breeder blanket mock-up, 24 th Symposium on Fusion Technology, Warsaw, Poland, September -5, 2006.
Fusion Neutronics, Nuclear Data, Design & Analyses - Overview of Recent FZK Activities -
Forschungszentrum Karlsruhe Technik und Umwelt Fusion Neutronics, Nuclear Data, Design & Analyses - Overview of Recent FZK Activities - Ulrich Fischer Association FZK-Euratom Forschungszentrum Karlsruhe,
More informationFUSION NEUTRONICS EXPERIMENTS AT FNG: ACHIEVEMENTS IN THE PAST 10 YEARS AND FUTURE PERSPECTIVES
FUSION NEUTRONICS EXPERIMENTS AT FNG: ACHIEVEMENTS IN THE PAST 10 YEARS AND FUTURE PERSPECTIVES presented by Paola Batistoni ENEA Fusion Division Fast Neutron Physics International Workshop & IEA International
More informationProgress in R&D Efforts on Neutronics and Nuclear Data for Fusion Technology Applications
1 FTP/P6-25 Progress in R&D Efforts on Neutronics and Nuclear Data for Fusion Technology Applications U. Fischer 1), P. Batistoni 2), D. Große 1), A. Klix 1), A. Konobeev 1), D. Leichtle 1), R. L Perel
More informationPoS(FNDA2006)093. Fusion neutronics experiments
*,1, M. Angelone 2, P. Batistoni 2, U. Fischer 3, H. Freiesleben 1, A. Klix 1, D. Leichtle 3, M. Pillon 2, E. Pönitz 1+, I. Schäfer 4, S. Unholzer 1 1 TU Dresden, Institut für Kern- und Teilchenphysik,
More informationNeutronic Activation Analysis for ITER Fusion Reactor
Neutronic Activation Analysis for ITER Fusion Reactor Barbara Caiffi 100 Congresso Nazionale SIF 1 Outlook Nuclear Fusion International Thermonuclear Experimental Reactor (ITER) Neutronics Computational
More informationShutdown dose calculations for the IFMIF test facility and the high flux test module
DOI: 10.15669/pnst.4.233 Progress in Nuclear Science and Technology Volume 4 (2014) pp. 233-237 ARTICLE Shutdown dose calculations for the IFMIF test facility and the high flux test module Keitaro Kondo
More informationI. Kodeli 1. INTRODUCTION
Science and Technology of Nuclear Installations Volume 2008, Article ID 659861, 5 pages doi:10.1155/2008/659861 Research Article Use of Nuclear Data Sensitivity and Uncertainty Analysis for the Design
More informationRESEARCH IN THE FIELD OF NEUTRONICS AND NUCLEAR DATA FOR FUSION
International Conference Nuclear Energy in Central Europe 2001 Hoteli Bernardin, Portorož, Slovenia, September 10-13, 2001 www: http://www.drustvo-js.si/port2001/ e-mail: PORT2001@ijs.si tel.:+ 386 1 588
More informationAnalyses of shielding benchmark experiments using FENDL-3 cross-section data starter library for ITER and IFMIF applications
DOI: 10.15669/pnst.4.322 Progress in Nuclear Science and Technology Volume 4 (2014) pp. 322-326 ARTICLE Analyses of shielding benchmark experiments using FENDL-3 cross-section data starter library for
More informationNeutronics Experiments for ITER at JAERI/FNS
Neutronics Experiments for ITER at JAERI/FNS C. Konno 1), F. Maekawa 1), Y. Kasugai 1), Y. Uno 1), J. Kaneko 1), T. Nishitani 1), M. Wada 2), Y. Ikeda 1), H. Takeuchi 1) 1) Japan Atomic Energy Research
More informationIntegral Benchmark Experiments of the Japanese Evaluated Nuclear Data Library (JENDL)-3.3 for the Fusion Reactor Design
1 Integral Benchmark Experiments of the Japanese Evaluated Nuclear Data Library (JENDL)-3.3 for the Fusion Reactor Design T. Nishitani 1), K. Ochiai 1), F. Maekawa 1), K. Shibata 1), M. Wada 2), I. Murata
More informationNeutronics experiments for validation of activation and neutron transport data for fusion application at the DT neutron generator of TU Dresden
Neutronics experiments for validation of activation and neutron transport data for fusion application at the DT neutron generator of TU Dresden A. Klix1, A. Domula2, U. Fischer1, D. Gehre2 1 Karlsruhe
More informationNeutronics experiments for validation of activation and neutron transport data for fusion application at the DT neutron generator of TU Dresden
Neutronics experiments for validation of activation and neutron transport data for fusion application at the DT neutron generator of TU Dresden A. Klix1, A. Domula2, U. Fischer1, D. Gehre2, J. Henniger2,
More informationStatus of TBM Neutronics Experiment
EFFDOC-938 (Task TTMN-002) Paola Batistoni EFF/EAF Meeting NEA Data Bank, Paris, 28 December 2005 - Overview EFF/EAF Meeting, Paris, 28 November 2005 OUTLINE Experiment configuration (dimension, materials
More information(Tandem Collimators for the Tangential GammaRay Spectrometer - KM6T-TC)
2009 Annual Report of the EURATOM-MEdC Association 188 Tandem Collimators System (Tandem Collimators for the Tangential GammaRay Spectrometer - KM6T-TC) S. Soare 1, T. Craciunescu 2, M. Curuia 1, V. Zoita
More informationPublished online: 27 Aug 2014.
This article was downloaded by: [49.50.78.27] On: 26 August 2015, At: 22:51 Publisher: Taylor & Francis Informa Ltd Registered in England and Wales Registered Number: 1072954 Registered office: 5 Howick
More information1 FT/P5-15. Assessment of the Shielding Efficiency of the HCLL Blanket for a DEMOtype Fusion Reactor
1 FT/P5-15 Assessment of the Shielding Efficiency of the HCLL Blanket for a DEMOtype Fusion Reactor J. Jordanova 1), U. Fischer 2), P. Pereslavtsev 2), Y. Poitevin 3), J. F. Salavy 4), A. Li Puma 4), N.
More informationDeuteron activation cross section measurements at the NPI cyclotron
Nuclear Physics Institute Řež EAF 2011 Deuteron activation cross section measurements at the NPI cyclotron E. Šimečková, P. Bém, M. Honusek, J. Mrázek, M. Štefánik, L. Závorka Nuclear Physics Institute
More informationIssues for Neutron Calculations for ITER Fusion Reactor
Introduction Issues for Neutron Calculations for ITER Fusion Reactor Erik Nonbøl and Bent Lauritzen Risø DTU, National Laboratory for Sustainable Energy Roskilde, Denmark Outline 1. Fusion development
More informationMeasurement of 40 MeV Deuteron Induced Reaction on Fe and Ta for Neutron Emission Spectrum and Activation Cross Section
Measurement of 40 MeV Deuteron Induced Reaction on Fe and Ta for Neutron Emission Spectrum and Activation Cross Section Toshiro Itoga, Masayuki Hagiwara, Takuji Oishi, So Kamada, Mamoru Baba Cyclotron
More informationPresent status of fusion neutronics activity and comments to neutron diagnostics for TBM
CBBI-13: Thirteenth International Workshop on Ceramic Breeder Blanket Interactions 30 Nov 2 Dec 2005 Fess Parker DoubleTree Resort Santa Barbara, CA, USA Present status of fusion neutronics activity and
More informationStudy of Impacts on Tritium Breeding Ratio of a Fusion DEMO Reactor
CCFE-PR(17)32 S. Zhen and T.N. Todd Study of Impacts on Tritium Breeding Ratio of a Fusion DEMO Reactor Enquiries about copyright and reproduction should in the first instance be addressed to the Culham
More informationNeutron Testing: What are the Options for MFE?
Neutron Testing: What are the Options for MFE? L. El-Guebaly Fusion Technology Institute University of Wisconsin - Madison http://fti.neep.wisc.edu/uwneutronicscenterofexcellence Contributors: M. Sawan
More informationImpact on the IFMIF irradiation property from the beam profile
Impact on the IFMIF irradiation property from the beam profile K. Kondo, U. Fischer, D. Große, A. Serikov KIT University of the State of Baden-Wuerttemberg and National Research Center of the Helmholtz
More informationTandem Collimators System
EFDA JET R(10)01 S. Soare, T. Craciunescu, M. Curuia and V. Zoita Tandem Collimators System COPYRIGHT ECSC/EEC/EURATOM, LUXEMBOURG 2010 Enquiries about Copyright and reproduction should be addressed to
More informationSINBAD Benchmark Database and FNS/JAEA Liquid Oxygen TOF Experiment Analysis. I. Kodeli Jožef Stefan Institute Ljubljana, Slovenia
SINBAD Benchmark Database and FNS/JAEA Liquid Oxygen TOF Experiment Analysis I. Kodeli Jožef Stefan Institute Ljubljana, Slovenia SG39 Meeting, Nov. 2014 SINBAD - Radiation Shielding Experiments Scope
More informationNeutron streaming studies along JET shielding penetrations
Neutron streaming studies along JET shielding penetrations Ion E. Stamatelatos 1, a, Theodora Vasilopoulou 1, Paola Batistoni 2, Barbara Obryk 3, Sergey Popovichev 4, Jonathan Naish 4, and JET contributors*
More informationNuclear Analysis of the HCLL Blanket Concept for the European DEMO Using the TRIPOLI-4 Monte Carlo Code
EUROFUSION CP(15)06/17 J.-C. Jaboulay et al. Nuclear Analysis of the HCLL Blanket Concept for the European DEMO Using the TRIPOLI-4 Monte Carlo Code 12th International Symposium on Fusion Nuclear Technology
More informationExperiment to validate EAF activation data: Activation on CuCrZr in NPI d-be neutron field
Nuclear Physics Institute Řež Report NPI ASCR Řež EXP(EFDA)-03/00 Experiment to validate EAF activation data: Activation on CuCrZr in NPI d-be neutron field P. Bém, V. Burjan, M. Götz, M. Honusek, J. Hep
More informationBenchmark Test of JENDL High Energy File with MCNP
Benchmark Test of JENDL High Energy File with MCNP Masayuki WADA, Fujio MAEKAWA, Chikara KONNO Intense Neutron Source Laboratory, Department of Materials Science Japan Atomic Energy Research Institute,
More informationACTIVATION ANALYSIS OF DECOMISSIONING OPERATIONS FOR RESEARCH REACTORS
ACTIVATION ANALYSIS OF DECOMISSIONING OPERATIONS FOR RESEARCH REACTORS Hernán G. Meier, Martín Brizuela, Alexis R. A. Maître and Felipe Albornoz INVAP S.E. Comandante Luis Piedra Buena 4950, 8400 San Carlos
More informationNeutronics calculations for the ITER Collective Thomson Scattering Diagnostics
Neutronics calculations for the ITER Collective Thomson Scattering Diagnostics 17 th Meeting on Reactor Physics in the Nordic Countries Göteborg, Sweden May 11-12, 2015 E. Nonbøl 1, E. Klinkby 1, B. Lauritzen
More informationNuclear Data Activities in the IAEA-NDS
Nuclear Data Activities in the IAEA-NDS R.A. Forrest Nuclear Data Section Department of Nuclear Sciences and Applications Outline NRDC NSDD EXFOR International collaboration CRPs DDPs Training Security
More informationFusion/transmutation reactor studies based on the spherical torus concept
FT/P1-7, FEC 2004 Fusion/transmutation reactor studies based on the spherical torus concept K.M. Feng, J.H. Huang, B.Q. Deng, G.S. Zhang, G. Hu, Z.X. Li, X.Y. Wang, T. Yuan, Z. Chen Southwestern Institute
More informationTransmutation of Minor Actinides in a Spherical
1 Transmutation of Minor Actinides in a Spherical Torus Tokamak Fusion Reactor Feng Kaiming Zhang Guoshu Fusion energy will be a long-term energy source. Great efforts have been devoted to fusion research
More informationarxiv: v1 [physics.ins-det] 9 Apr 2018
arxiv:1804.02889v1 [physics.ins-det] 9 Apr 2018 Study of neutron shielding collimators for curved beamlines at the European Spallation Source 1. Introduction V. Santoro 1,2, D. D. DiJulio 1,2, S. Ansell
More informationCalculation of uncertainties on DD, DT n/γ flux at potential irradiation positions (vertical ports) and KN2 U3 by TMC code (L11) Henrik Sjöstrand
Calculation of uncertainties on DD, DT n/γ flux at potential irradiation positions (vertical ports) and KN2 U3 by TMC code (L11) Henrik Sjöstrand Acknowledgements Henrik Sjöstrand and JET Contributors*
More informationTRADE Preliminary comparison of codes for the activation calculation of the water cooling the target
TRADE Preliminary comparison of codes for the activation calculation of the water cooling the target TRADE_TS_8_TR_00_0 (February 2005) A.Stankovsky, C.Petrovich, D.Cepraga, M. Frisoni TABLE OF CONTENTS
More informationNeutronics R&D Needs and Testing In Fusion Test Facility
Neutronics R&D Needs and Testing In Fusion Test Facility M. Youssef UCLA APEX/TBM Meeting, November 3-5, 2003, UCLA Important Nuclear Parameters of Interest To be Tested in TBM and Related Performance
More information3.12 Development of Burn-up Calculation System for Fusion-Fission Hybrid Reactor
3.12 Development of Burn-up Calculation System for Fusion-Fission Hybrid Reactor M. Matsunaka, S. Shido, K. Kondo, H. Miyamaru, I. Murata Division of Electrical, Electronic and Information Engineering,
More informationITER DIAGNOSTIC PORT PLUG DESIGN. N H Balshaw, Y Krivchenkov, G Phillips, S Davis, R Pampin-Garcia
N H Balshaw, Y Krivchenkov, G Phillips, S Davis, R Pampin-Garcia UKAEA, Culham Science Centre, Abingdon, Oxon,OX14 3DB, UK, nick.balshaw@jet.uk Many of the ITER diagnostic systems will be mounted in the
More informationRecent activity of Neutronics related IFMIF
Recent activity of Neutronics related IFMIF Presented by Michinori YAMAUCHI JAERI, Japan IEA International Work Shop on Fusion Neutronics 5 September, 22 Dresden, Germany Contents Neutronics Problems Experimental
More informationVERIFICATION OF MONTE CARLO CALCULATIONS OF THE NEUTRON FLUX IN THE CAROUSEL CHANNELS OF THE TRIGA MARK II REACTOR, LJUBLJANA
International Conference Nuclear Energy for New Europe 2002 Kranjska Gora, Slovenia, September 9-12, 2002 www.drustvo-js.si/gora2002 VERIFATION OF MONTE CARLO CALCULATIONS OF THE NEUTRON FLUX IN THE CAROUSEL
More informationDose Rates Modeling of Pressurized Water Reactor Primary Loop Components with SCALE6.0
ABSTRACT Dose Rates Modeling of Pressurized Water Reactor Primary Loop Components with SCALE6.0 Mario Matijević, Dubravko Pevec, Krešimir Trontl University of Zagreb, Faculty of Electrical Engineering
More informationCharacterization of waste by R2S methodology: SEACAB system. Candan Töre 25/11/2017, RADKOR2017, ANKARA
Characterization of waste by R2S methodology: SEACAB system Candan Töre 25/11/2017, RADKOR2017, ANKARA SEA Ingeniería y Análisis de Blindajes Avda. de Atenas, 75, 106-107 28230 LAS ROZAS (Madrid) Tel:
More informationMCNP CALCULATION OF NEUTRON SHIELDING FOR RBMK-1500 SPENT NUCLEAR FUEL CONTAINERS SAFETY ASSESMENT
MCNP CALCULATION OF NEUTRON SHIELDING FOR RBMK-15 SPENT NUCLEAR FUEL CONTAINERS SAFETY ASSESMENT R. Plukienė 1), A. Plukis 1), V. Remeikis 1) and D. Ridikas 2) 1) Institute of Physics, Savanorių 231, LT-23
More informationCalibration of JET Neutron Detectors at 14 MeV neutron energy
Calibration of JET Neutron Detectors at 14 MeV neutron energy Paola Batistoni, ENEA, Frascati (Italy) EUROfusion WPJET3 Project Leader Neutron Group User s Meeting, NPL, UK, 20.10.2015 Contributors CCFE:
More informationA Project for High Fluence 14 MeV Neutron Source
A Project for High Fluence 14 MeV Neutron Source Mario Pillon 1, Maurizio Angelone 1, Aldo Pizzuto 1, Antonino Pietropaolo 1 1 Associazione ENEA-EURATOM Sulla Fusione, ENEA C.R. Frascati, via E. Fermi,
More informationRadiation safety of the Danish Center for Proton Therapy (DCPT) Lars Hjorth Præstegaard Dept. of Medical Physics, Aarhus University Hospital
Radiation safety of the Danish Center for Proton Therapy (DCPT) Lars Hjorth Præstegaard Dept. of Medical Physics, Aarhus University Hospital Rationale of proton therapy Dose deposition versus depth in
More informationMeasurement of 59 Ni(n, p) 59 Co Reaction Cross-section through Surrogate Technique for Fusion Technology Applications
Measurement of 59 Ni(n, p) 59 Co Reaction Cross-section through Surrogate Technique for Fusion Technology Applications Presented By Jyoti Pandey Department of Physics G.B. Pant University, Pantnagar Uttarakhand,
More informationTritium Transport Modelling: first achievements on ITER Test Blanket Systems simulation and perspectives for DEMO Breeding Blanket
Tritium Transport Modelling: first achievements on ITER Test Blanket Systems simulation and perspectives for DEMO Breeding Blanket I. Ricapito 1), P. Calderoni 1), A. Ibarra 2), C. Moreno 2), Y. Poitevin
More informationNeutronics calculations for the ITER Collective Thomson Scattering Diagnostics
Downloaded from orbit.dtu.dk on: Sep 04, 2018 Neutronics calculations for the ITER Collective Thomson Scattering Diagnostics Nonbøl, Erik; Klinkby, Esben Bryndt; Lauritzen, Bent; Santos, R. Publication
More informationExtension of the MCBEND Monte Carlo Code to Perform Adjoint Calculations using Point Energy Data
Extension of the MCBEND Monte Carlo Code to Perform Adjoint Calculations using Point Energy Data Malcolm Grimstone Abstract In radiation transport calculations there are many situations where the adjoint
More informationSerpent Monte Carlo Neutron Transport Code
Serpent Monte Carlo Neutron Transport Code NEA Expert Group on Advanced Monte Carlo Techniques, Meeting September 17 2012 Jaakko Leppänen / Tuomas Viitanen VTT Technical Research Centre of Finland Outline
More informationFusion Material Transmutation and Activation Analysis Induced by Fast Neutrons
IEA International Workshop on Fusion Neutronics September 5, 2002 - Dresden - Germany Fusion Material Transmutation and Activation Analysis Induced by Fast Neutrons a) Vitenea-IEF radiation transport library
More informationMUSE-4 BENCHMARK CALCULATIONS USING MCNP-4C AND DIFFERENT NUCLEAR DATA LIBRARIES
MUSE-4 BENCHMARK CALCULATIONS USING MCNP-4C AND DIFFERENT NUCLEAR DATA LIBRARIES Nadia Messaoudi and Edouard Mbala Malambu SCK CEN Boeretang 200, B-2400 Mol, Belgium Email: nmessaou@sckcen.be Abstract
More informationNeutrons For Science (NFS) at SPIRAL-2 (Part II: pulsed neutron beam)
Neutrons For Science (NFS) at SPIRAL-2 (Part II: pulsed neutron beam) X. Ledoux 1 and D. Ridikas 2 1) CEA/DIF/DPTA/SPN, BP 12, 91680 Bruyères-le-Châtel, France 2) CEA/DSM/DAPNIA/SPhN, CEA Saclay, 91191
More informationImprovements and developments of physics models in PHITS for radiotherapy and space applications
Improvements and developments of physics models in PHITS for radiotherapy and space applications L. Sihver 1-9, T. Sato 10, S. Hashimoto 10, T. Ogawa 10, K. Niita 11 1 Atominstitut, TU Wien, Austria, 2
More informationBenchmark Tests of Gamma-Ray Production Data in JENDL-3 for Some Important Nuclides
Journal of NUCLEAR SCIENCE and TECFINOLOGY, 27[9], pp. 844~852 (September 1990). TECHNICAL REPORT Benchmark Tests of Gamma-Ray Production Data in JENDL-3 for Some Important Nuclides CAI Shao-huit, Akira
More informationin Cross-Section Data
Sensitivity of Photoneutron Production to Perturbations in Cross-Section Data S. D. Clarke Purdue University, West Lafayette, Indiana S. A. Pozzi University of Michigan, Ann Arbor, Michigan E. Padovani
More informationNeutronics aspects of fusion reactor research
Neutronics aspects of fusion reactor research Axel Klix INSTITUTE FOR NEUTRON PHYSICS AND REACTOR TECHNOLOGY KIT University of the State of Baden-Wuerttemberg and National Research Center of the Helmholtz
More informationNeutronic Evaluation of a Power Plant Conceptual Study considering Different Modelings
1 FTP/P7-25 Neutronic Evaluation of a Power Plant Conceptual Study considering Different Modelings C.E. Velasquez 1,2), C. Pereira 1,2), M.A. Veloso 1,2), A.L.Costa 1,2) 1) Nuclear Engineering Department
More informationThe Lead-Based VENUS-F Facility: Status of the FREYA Project
EPJ Web of Conferences 106, 06004 (2016) DOI: 10.1051/epjconf/201610606004 C Owned by the authors, published by EDP Sciences, 2016 The Lead-Based VENUS-F Facility: Status of the FREYA Project Anatoly Kochetkov
More informationMOx Benchmark Calculations by Deterministic and Monte Carlo Codes
MOx Benchmark Calculations by Deterministic and Monte Carlo Codes G.Kotev, M. Pecchia C. Parisi, F. D Auria San Piero a Grado Nuclear Research Group (GRNSPG), University of Pisa via Diotisalvi 2, 56122
More informationApplication and Validation of Event Generator in the PHITS Code for the Low-Energy Neutron-Induced Reactions
Progress in NUCLEAR SCIENCE and TECHNOLOGY, Vol. 2, pp.931-935 (2011) ARTICLE Application and Validation of Event Generator in the PHITS Code for the Low-Energy Neutron-Induced Reactions Yosuke IWAMOTO
More informationValidation of the Monte Carlo Model Developed to Estimate the Neutron Activation of Stainless Steel in a Nuclear Reactor
Joint International Conference on Supercomputing in Nuclear Applications and Monte Carlo 2010 (SNA + MC2010) Hitotsubashi Memorial Hall, Tokyo, Japan, October 17-21, 2010 Validation of the Monte Carlo
More informationChapter 5: Applications Fission simulations
Chapter 5: Applications Fission simulations 1 Using fission in FISPACT-II FISPACT-II is distributed with a variety of fission yields and decay data, just as incident particle cross sections, etc. Fission
More informationComparison with simulations to experimental data for photoneutron reactions using SPring-8 Injector
Comparison with simulations to experimental data for photoneutron reactions using SPring-8 Injector Yoshihiro Asano 1,* 1 XFEL/SPring-8 Center, RIKEN 1-1 Koto Sayo Hyogo 679-5148, Japan Abstract. Simulations
More informationTechnological and Engineering Challenges of Fusion
Technological and Engineering Challenges of Fusion David Maisonnier and Jim Hayward EFDA CSU Garching (david.maisonnier@tech.efda.org) 2nd IAEA TM on First Generation of FPP PPCS-KN1 1 Outline The European
More informationEstimation of Radioactivity and Residual Gamma-ray Dose around a Collimator at 3-GeV Proton Synchrotron Ring of J-PARC Facility
Estimation of Radioactivity and Residual Gamma-ray Dose around a Collimator at 3-GeV Proton Synchrotron Ring of J-PARC Facility Y. Nakane 1, H. Nakano 1, T. Abe 2, H. Nakashima 1 1 Center for Proton Accelerator
More informationThe Neutron Diagnostic Experiment for Alcator C-Mod
PFC/JA-9-16 The Neutron Diagnostic Experiment for Alcator C-Mod C. L. Fiore, R. S. Granetz Plasma Fusion Center Massachusetts Institute of Technology -Cambridge, MA 2139 May, 199 To be published in Review
More informationHigh Energy Neutron Scattering Benchmark of Monte Carlo Computations
International Conference on Mathematics, Computational Methods & Reactor Physics (M&C 2009) Saratoga Springs, New York, May 3-7, 2009, on CD-ROM, American Nuclear Society, LaGrange Park, IL (2009) High
More informationCALCULATION OF ISOTOPIC COMPOSITION DURING CONTINUOUS IRRADIATION AND SUBSEQUENT DECAY IN BIOLOGICAL SHIELD OF THE TRIGA MARK ΙΙ REACTOR
International Conference Nuclear Energy for New Europe 2002 Kranjska Gora, Slovenia, September 9-12, 2002 www.drustvo-js.si/gora2002 CALCULATION OF ISOTOPIC COMPOSITION DURING CONTINUOUS IRRADIATION AND
More informationEVALUATION OF PWR AND BWR CALCULATIONAL BENCHMARKS FROM NUREG/CR-6115 USING THE TRANSFX NUCLEAR ANALYSIS SOFTWARE
ANS MC2015 - Joint International Conference on Mathematics and Computation (M&C), Supercomputing in Nuclear Applications (SNA) and the Monte Carlo (MC) Method Nashville, Tennessee April 19 23, 2015, on
More informationProvisional scenario of radioactive waste management for DEMO
US-Japan Workshop on Fusion power plants and Related advanced technologies 13-14 March 2014 UCSD, USA Provisional scenario of radioactive waste management for DEMO Youji Someya Japan Atomic Energy Agency,
More informationThe European Activation File: EAF-2005 decay data library
UKAEA FUS 516 EURATOM/UKAEA Fusion The European Activation File: EAF-2005 decay data library R.A. Forrest January 2005 UKAEA EURATOM/UKAEA Fusion Association Culham Science Centre Abingdon Oxfordshire
More informationA Dummy Core for V&V and Education & Training Purposes at TechnicAtome: In and Ex-Core Calculations
A Dummy Core for V&V and Education & Training Purposes at TechnicAtome: In and Ex-Core Calculations S. Nicolas, A. Noguès, L. Manifacier, L. Chabert TechnicAtome, CS 50497, 13593 Aix-en-Provence Cedex
More informationThe Development and Application of One Thermal Hydraulic Program Based on ANSYS for Design of Ceramic Breeder Blanket of CFETR
J Fusion Energ (2015) 34:1088 1093 DOI 10.1007/s10894-015-9923-6 ORIGINAL RESEARCH The Development and Application of One Thermal Hydraulic Program Based on ANSYS for Design of Ceramic Breeder Blanket
More informationTENDL-TMC for dpa and pka
WIR SCHAFFEN WISSEN HEUTE FÜR MORGEN D. Rochman, A.J. Koning, J.C. Sublet, M. Gilbert, H. Sjöstrand, P. Helgesson and H. Ferroukhi TENDL-TMC for dpa and pka Technical Meeting on Uncertainties for Radiation
More informationShielding for Fusion Reactors
Radiation Shielding for Fusion Reactors R. T. Santoro Oak Ridge National Laboratory Oak Ridge, TN 37831-6363 USA Radiation shielding requirements for fusion reactors present different problems than those
More informationComplete activation data libraries for all incident particles, all energies and including covariance data
Complete activation data libraries for all incident particles, all energies and including covariance data Arjan Koning NRG Petten, The Netherlands Workshop on Activation Data EAF 2011 June 1-3 2011, Prague,
More informationRole and Challenges of Fusion Nuclear Science and Technology (FNST) toward DEMO
Role and Challenges of Fusion Nuclear Science and Technology (FNST) toward DEMO Mohamed Abdou Distinguished Professor of Engineering and Applied Science (UCLA) Director, Center for Energy Science & Technology
More informationExcitation functions of residual nuclei production from MeV proton-irradiated 206,207,208,nat Pb and 209 Bi
PRAMANA c Indian Academy of Sciences Vol. 68, No. 2 journal of February 2007 physics pp. 289 295 Excitation functions of residual nuclei production from 40 2600 MeV proton-irradiated 206,207,208,nat Pb
More informationDevelopment of high intensity D T fusion neutron generator HINEG
INTERNATIONAL JOURNAL OF ENERGY RESEARCH Int. J. Energy Res. (2016) Published online in Wiley Online Library (wileyonlinelibrary.com)..3572 Development of high intensity D T fusion neutron generator HINEG
More informationBrief Introduction to: Transport Theory/Monte Carlo Techniques/MCNP
22:54 Neutron Interactions and Applications Brief Introduction to: Transport Theory/Monte Carlo Techniques/MCNP The behavior of individual neutrons and nuclei cannot be predicted. However, the average
More informationMission Elements of the FNSP and FNSF
Mission Elements of the FNSP and FNSF by R.D. Stambaugh PERSISTENT SURVEILLANCE FOR PIPELINE PROTECTION AND THREAT INTERDICTION Presented at FNST Workshop August 3, 2010 In Addition to What Will Be Learned
More informationImproved modelling of the neutron source for neutron activation experiments
Improved modelling of the neutron source for neutron activation experiments Steven Lilley, R Pampin, L Packer Neutronics and Nuclear Data Group NPL Neutron Users Club November 2011 CCFE is the fusion research
More informationOptimization studies of photo-neutron production in high-z metallic targets using high energy electron beam for ADS and transmutation
PRAMANA c Indian Academy of Sciences Vol. 68, No. 2 journal of February 2007 physics pp. 235 241 Optimization studies of photo-neutron production in high-z metallic targets using high energy electron beam
More informationA Monte Carlo Simulation for Estimating of the Flux in a Novel Neutron Activation System using 252 Cf Source
IOSR Journal of Applied Physics (IOSR-JAP) e-issn: 2278-4861.Volume 7, Issue 3 Ver. II (May. - Jun. 2015), PP 80-85 www.iosrjournals.org A Monte Carlo Simulation for Estimating of the Flux in a Novel Neutron
More informationUSA HTR NEUTRONIC CHARACTERIZATION OF THE SAFARI-1 MATERIAL TESTING REACTOR
Proceedings of HTR2008 4 th International Topical Meeting on High Temperature Reactors September 28-October 1, 2008, Washington, D.C, USA HTR2008-58155 NEUTRONIC CHARACTERIZATION OF THE SAFARI-1 MATERIAL
More informationCalculations of Photoneutrons from Varian Clinac Accelerators and Their Transmissions in Materials*
SLAC-PUB-70 Calculations of Photoneutrons from Varian Clinac Accelerators and Their Transmissions in Materials* J. C. Liu, K. R. Kase, X. S. Mao, W. R. Nelson, J. H. Kleck, and S. Johnson ) Stanford Linear
More informationNeutron Activation Cross Sections for Fusion
Neutron Activation Cross Sections for Fusion Adelle Hay The University of York/Culham Centre for Fusion Energy March 30, 2015 Adelle Hay (UoY/CCFE) Neutron activation cross sections March 30, 2015 1 /
More informationPREPARATION OF HEXCALIBER TESTS AND PRELIMINARY THERMO-MECHANICAL ANALYSES
PREPARATION OF HEXCALIBER TESTS AND PRELIMINARY THERMO-MECHANICAL ANALYSES I. Ricapito a, G. Dell Orco b, P. A. Di Maio c, R. Giammusso c, A. Malavasi a, A. Tincani a, G. Vella c a ENEA C.R. Brasimone
More informationConditions Around the Proton Beam Window of the Spallation Neutron Source
Conditions Around the Proton Beam Window of the Spallation Neutron Source Felix C. Difilippo Oak Ridge National Laboratory P.O. Box 2008 Oak Ridge, TN 3783 l-6363 USA Paper to be Presented and Published
More informationReview of nuclear data of major actinides and 56 Fe in JENDL-4.0
Review of nuclear data of major actinides and 56 Fe in JENDL-4.0 Osamu Iwamoto, Nobuyuki Iwamoto Nuclear Data Center, Nuclear Science and Engineering Directorate Japan Atomic Energy Agency Ibaraki, Japan
More informationInteractive Web Accessible Gamma-Spectrum Generator & EasyMonteCarlo Tools
10th Nuclear Science Training Course with NUCLEONICA, Cesme, Turkey, 8-10 October, 2008 1 Interactive Web Accessible Gamma-Spectrum Generator & EasyMonteCarlo Tools A.N. Berlizov ITU - Institute for Transuranium
More informationBrazilian Journal of Physics ISSN: Sociedade Brasileira de Física Brasil
Brazilian Journal of Physics ISSN: 0103-9733 luizno.bjp@gmail.com Sociedade Brasileira de Física Brasil Araújo, Arione; Pereira, Claubia; Fortini Veloso, Maria Auxiliadora; Lombardi Costa, Antonella; Moura
More informationNuclear Data Activities at the IAEA Nuclear Data Section
Nuclear Data Activities at the IAEA Nuclear Data Section Stanislav P. Simakov International Atomic Energy Agency Vienna International Centre P.O. Box 100 A-1400 Vienna, Austria s.simakov@iaea.org ABSTRACT
More informationFusion Development Facility (FDF) Mission and Concept
Fusion Development Facility (FDF) Mission and Concept Presented by R.D. Stambaugh PERSISTENT SURVEILLANCE FOR PIPELINE PROTECTION AND THREAT INTERDICTION University of California Los Angeles FNST Workshop
More informationIAC-08-A MONTE CARLO SIMULATIONS OF ENERGY LOSSES BY SPACE PROTONS IN THE CRATER DETECTOR
IAC-08-A1.4.06 MONTE CARLO SIMULATIONS OF ENERGY LOSSES BY SPACE PROTONS IN THE CRATER DETECTOR Lawrence W. Townsend The University of Tennessee, Knoxville, Tennessee, United States of America ltownsen@tennessee.edu
More information