Using the thermal electrical fluctuation method to investigate molecular mobility in structurally inhomogeneous polymer systems
|
|
- Justina Hubbard
- 6 years ago
- Views:
Transcription
1 Plasticheskie Massy, No.,, pp. 19 Using the thermal electrical fluctuation method to investigate molecular mobility in structurally inhomogeneous polymer systems Yu. V. Zelenev, V. A. Ivanovskii, and D. D. Valgin D. I. Mendeleev Russian Chemico-Technological Institute Selected from International Polymer Science and Technology, 9, No. 9,, reference PM //19; transl. serial no Translation submitted by P. Curtis This work demonstrates the relationship between the intensity of electrical fluctuations and features of the structural organisation of polymer systems of different classes. The results of analysing processes of molecular mobility in the polymers polyvinyl chloride (PVC), polystyrene (PS), polymethyl methacrylate (PMMA), low-density polyethylene (LDPE), polytetrafluoroethylene, natural rubber, and SKMS-1 butadiene methylstyrene rubber and in the copolymer vinylidene fluoride + tetrafluoroethylene (VDF + TFE) have been interpreted in accordance with the theory of temperature transitions in solids, according to which they can be observed after 1. K. An investigation was made of the dependence of the spectral density of the stress of electrical fluctuations on the frequency in the range.1 1. MHz. The thermal electrical fluctuation method was used to determine the physical quantities of polymer systems that are connected with their structural organisation: dielectric characteristics, effective dipole moment, internal pressure. The correlation was shown between the physical characteristics of PVC when modifier MBS is introduced and the thickness-related spectral density of the stresses of electrical fluctuations. Molecular mobility in polymers is due to vibrations of individual groups and fragments of macromolecules which are represented by different subsystems: the set of elements of supermolecular structures, macromolecules of identical or different length, free and combined segments, and different quasiparticles [1]. In a study of molecular motions in polymers of different structure by methods of relaxation spectrometry in wide temperature and frequency ranges it was established that the temperature values at which temperature transitions appear depend considerably on the types of force field and their strengths. With increase in the strength of the force field (as with increase in the frequency of external action), the regions of relaxation that appear are displaced towards higher temperatures, which makes it difficult to assess the true values of the temperature coefficients of the relaxation times and the effective size of the kinetic units. Furthermore, not all temperature transitions can be recorded by existing methods used to study relaxation effects in polymeric materials and systems. It is known [ 4] that the temperatures of the transitions in solids can be placed in the series T i = m T (1) where m is an integer and T = 1. K. Thus, in the range 4 K, up to temperature transitions can appear. However, in real polymers no more than 1 1 are recorded. This is due firstly to the structural inhomogeneity of the polymer systems, and secondly to the insensitivity of the existing methods of relaxation spectrometry that are used for analysis. In this context, to analyse processes of molecular mobility, it is expedient to use methods that make it possible to carry out tests in the absence of any force fields, and that are sensitive to the appearance of as large a number of temperature transitions of the m T series as possible. One such method is the thermal electrical International Polymer Science and Technology, Vol., No., T/1
2 fluctuation method []. Essentially, this method is fairly simple [6]. The material to be investigated is placed between the plates of a primary capacitance pick-off and, as the temperature rises, the change in the mean square stress of electrical fluctuations of the polymer on the clamps of this sensor are measured and recorded. In [6] it was shown that, on the dependences of the mean square stress of electrical fluctuations, U, on time t and temperature T, regions of anomalous change in U are observed, which is due to temperature transitions in the polymer. Here, the value of U can be presented by the following relationship [7]: U U T (t,t) + U ri (t,t), t is t t if = () U T (t,t), t [t is,t if] where U T (t, T) is a component proportional to the intensity of internal friction the mean square stress of thermal electrical fluctuations, and U ri (t, T) is the relaxation component the fluctuations over and above the thermal fluctuations. The latter are due to temperature transitions and appear when new types of motion of the available relaxers (kinetic units) appear. Subscript s stands for the start and subscript f stands for the finish of appearance of the corresponding transition. Table 1 gives the results of experimental investigations of U (t, T) at a frequency f = 1. x 1 Hz in the band f = 1 Hz for polymers of different classes at a heating rate of K/min. It also compares the minimum temperature of appearance of transition according to data of the thermal electrical fluctuation method and the value of T i calculated by means of formula (1). An analysis of the data obtained makes it possible to state the following. In the investigated temperature range 78 4 K, the greatest number of temperature transitions are possessed by a vulcanisate of natural rubber and SKMS-1. The smallest number are possessed by noncrystalline solid polymers PVC, PS, and PMMA. Crystalline LDPE and PTFE lie in an intermediate position in terms of the number of regions of appearance of processes of molecular mobility. Unvulcanised natural rubber has a greater number of transitions than PVC, PS, and PMMA but a smaller number than LDPE and PTFE. Thus, the structural organisation of the polymers has a considerable influence on the number of processes of molecular mobility that appear. Here, polymers possessing a more ordered structure also have a greater number of temperature transitions. Comparison of the temperatures of the series T i = m T with values of T imin indicates that T imin differs from T i in most cases by no more than ±K (Figure 1). This is also due to the structural inhomogeneity of the specimens investigated. Depending on the ordering of the kinetic units within the polymer, unfreezing of each type of their molecular motion (for example, longitudinal or torsional vibrations) can proceed either as entirely independent processes (Figure 1a) or as combined processes (Figure 1b). If a single combined process appears, then the number of possible temperature transitions can be defined as N = (T imax - T imin ) T () where T imin and T imax are the minimum and maximum temperatures of appearance of transitions that are recorded from the variance of the mean square stress of thermal electrical fluctuations of the polymer, and T = 1. K. Table gives the results of analysing fluctograms of U (t, T) of polarised and unpolarised copolymer V F + TFE and assigning the temperature transitions observed to the series n T. It is well known that polarisation leads to ordering of the structure of the polymer. The data in Table and the results of IR spectroscopy [8] confirm the thesis that a greater number of temperature transitions of the series ndt appear in the more ordered structure. The effective activation energy of unfreezing of the mobility of relaxers, determined using the thermal fluctuation method, is equal to [9] E i t f lg t j =. R 1 1 T T f j where R is the universal gas constant, t f and T f are the finish time and temperature of the process being analysed, and t j and T j are the time and temperature corresponding to the middle of the appearance of the jth process of molecular mobility. If the material being investigated is structurally homogeneous, then when it is heated at a constant rate, the temperature transitions will appear in accordance with the series m T. Considering that the processes of unfreezing of the corresponding molecular motions Figure 1 Modifications of the appearance of temperature transitions in polymers on fluctograms of U (t, T): (a) two independent processes; (b) combined process governed by two temperature transitions (4) T/ International Polymer Science and Technology, Vol., No.,
3 Table 1 Calculated data for T, i K m m T PVC Experimental values of minimum temperatures of appearance of processes of molecular mobility ccording to data of thermal electrical fluctuation method T, K PS a imin PMMA LDPE PTFE Natural rubber Vulcanisate Natural rubber SKM S begin at T j and end at T f = m T + 1, where T i = m T = m x 1. K, where T i = m T = m x 1. for W m we will obtain the following relationship: W = m + 69 J/ mol () m m The value of W m with m = corresponds to the energy of zero vibrations of the relaxers (i.e. at T = ). The estimate obtained, W = 69 J/mol, is similar in magnitude to the energy of dipole dipole interaction of atoms 1 ev or 96 J/mol at T = [1]. International Polymer Science and Technology, Vol., No., T/
4 Table m T j = m T, K Unpolarised DF + TFE T, V jmin With account taken of the above, it is possible to propose a scheme of appearance of processes of α-, β-, γ-, and δ-relaxation, and variants of their break-up for non-crystalline and crystalline solid polymers (Figure ) with indication of the values of the energy barriers for the occurrence of different molecular motions. K Polarised DF + TFE T V jmin , K Figure Scheme of appearance of temperature transitions in polymers and variants of break-up of α-, β-, γ-, and δ- relaxation processes Thus, the thermal electrical fluctuation method is extremely informative and sensitive to temperature transitions existing in the polymer. The number of recorded transitions in the polymer system depends on its structural organisation. Structurally inhomogeneous materials have fewer transitions. Each of the processes of α-, β-, γ-, and δ relaxation breaks up into corresponding subprocesses appearing at temperatures of the series m T. A second aspect of using the thermal electrical fluctuation method for analysis of structurally inhomogeneous polymer systems is the determination of their physical properties, which is possible on the basis of measuring the mean square stress of thermal electrical fluctuations U T (t, T). As shown in [, 6], U T (t, T) can be written in the form 8K d f ε UT = T (6) επ D f ( ε ) + ( ε ) where K is the Boltzmann constant, ε is the electrical constant, d is the thickness of the polymer specimen, D is the diameter of the potential electrode of the primary pickoff, f and f are the frequency and band of frequencies of U T measurement, and ε and ε are the dielectric permittivity and coefficient of dielectric losses. With T = const, U T characterises the structural organisation of the polymers. For comparison of polymer systems of different classes in terms of U T, it is necessary to introduce into the examination the thickness-related spectral density of the stress of thermal electrical fluctuations S d UT Sd = V Hz m fd, / (7) As follows from Figure, S d of all the polymers investigated obeys the law 1/f, which confirms the thesis concerning the thermal nature of the processes of electrical fluctuations at a fixed test temperature T = 9 K and the band of frequencies f = 1 Hz. Here, crosslinked polymers (cured epoxy resin ED-4M) have the lowest value compared with all other polymer systems. The highest value of S d is possessed by PVC, which is due to the polarity of this polymer. Of note is the identical nature of change in S d of PVC and in the mechanical characteristics (tensile elastic modulus E t and yield point σ) when modifier MBS is introduced into the polymer (Figure 4). The formation of a three-dimensional structure of the polymer system also has a marked effect on the behaviour of S d. Figure gives comparative characteristics of ED- 4M specimens with increase in the degree of curing: the spectral density S d and the dielectric permittivity ε measured in the normal way (measurements of ε of specimens in a variable electric field were carried out using an E1- instrument and a VR 49 dielectric T/4 International Polymer Science and Technology, Vol., No.,
5 holder). As follows from Figure, ε changes little with increase in the degree of curing, while S d decreases by more than a factor of.. Measurements of U T make it possible to determine the dielectric characteristics ε and ε of polymer systems without exposing the specimen to an external electric field [6]. From the values of ε and ε it is possible to determine the effective dipole moment in polymers by a formula following from the fluctuation dissipation theorem [11] Figure Dependence of thickness-related spectral density of stress of electrical fluctuations S d on frequency for polymers of different structural organisation: 1 PVC; PMMA; PC; 4 PS; ED-4M Figure 4 Dependence of (1) spectral density S d, () tensile elastic modulus E t and () yield point σ on content of modifier MBS in PVC M ε ( 1+ ε )( ε 1) µ eff = KT (8) ρ 4πNA ε where M is the molecular weight of the recurrent unit of the polymer, ρ is density, and N A is Avogadro s constant. The internal pressure ρ was determined according to []. Table gives the results of estimating the physical characteristics of polymer systems of different structural organisation and chemical composition by the thermal electrical fluctuation method. The necessary values of the molecular parameters were taken from [1]. To compare the data obtained, use was made of the results of calculating µ eff by the procedure described in [1]. As follows from Table, ε, ε, and tg δ = ε /ε determined without an external electric field are an order of magnitude greater than the values measured under normal conditions. This indicates the intensity of processes of molecular mobility of relaxers of the polymer system being studied and its polarity. Polyethylene and polystyrene have the lowest values of ε and tg δ. The high values of ε and tg δ for PTFE are caused by a phase transition connected with change in the structure of the elementary cell of the crystal in the temperature region T = 9 K. The magnitude of the effective dipole moment for PVC,.1 D, reflects the dipole moment of the C Cl bond with µ =. D [14]. For PMMA, the obtained value µ eff = 1.89 D may be due to the methyl ether group COOCH, for which there are polar bonds C O with µ = 1.1 D and C=O with µ =.7 D. The obtained values of the internal pressure ρ reflect fairly well the cohesive energy of the polymers being analysed. REFERENCES Figure Change in (1) spectral density S d and () dielectric permittivity ε as function of degree of curing of ED-4M 1. E. N. Zadorina et al., Dokl. Akad. Nauk SSSR, 7, No. 6, 1981, p. 16. Yu. N. Venevtsev et al., Dokl. Akad. Nauk SSSR,, No. 1, 1976, p. 11. V. I. Muromtsev et al., Systems of special temperature points of solids (Eds. Yu. N. Venevtsev and V. I. Muromtsev), Moscow, 1986, p G. A. Lushcheikin, Methods for investigating electrical properties of polymers, Moscow, 1988, p. 11 International Polymer Science and Technology, Vol., No., T/
6 Table P olymer ε ε t g δ µ ef, D µ f e ff, D [14] ρ, MPa PMMA PVC PS PE PTFE Yu. V. Zelenev and V. A. Ivanovskii, Vys. Soed., A, No. 7, 199, p V. A. Ivanovskii, M. Tech. Sci. thesis, Moscow, 1986, 6 pp. 7. Yu. V. Zelenev et al., Vys. Soed., B8, No. 9, 1986, p V. G. Sokolov et al., Vys. Soed., 9, No., 1987, p. 9. Yu. V. Zelenev and V. A. Ivanovskii, Modern methods and instruments for monitoring product quality, Moscow, 1989, p Yu. S. Barash, Van der Waals forces, Moscow, 1988, p. 11. M. M. Bredov et al., Classical electrodynamics, Moscow, 198, p A. A. Askadskii and Yu. I. Matveev, Chemical structure and physical properties ofpolymers, Moscow, 198, 48 pp. 1. D. V. Van Krevelen, Properties and chemical structure of polymers, Moscow, 1976, 416 pp. 14. M. V. Vol kenshtein, Structure and physical properties of molecules, Moscow, 19, p. 4 (No date given) T/6 International Polymer Science and Technology, Vol., No.,
Effect of surface fluorination and sulphonation on the adhesion and tribological properties of polymers
Plasticheskie Massy, No. 8, 2006, pp. 17-19 Effect of surface fluorination and sulphonation on the adhesion and tribological properties of polymers V. G. Nazarov, V. P. Stolyarov, L. A. Evlampieva, and
More informationAssessing the glass transition temperature of nanocomposites based on copolymers of styrene butadiene rubber, polyisoprene, and polybutadiene
Plasticheskie Massy, No. 11-12, 2015, pp. 30 34 Assessing the glass transition temperature of nanocomposites based on copolymers of styrene butadiene rubber, polyisoprene, and polybutadiene T.A. Matseevich,
More informationProperties of polypropylene modified with elastomers
Plasticheskie Massy, No. 5, 2005, pp. 31 34 Properties of polypropylene modified with elastomers G. M. Danilova-Volkovskaya Rostov State Academy of Agricultural Engineering Selected from International
More informationComparative analysis of the relaxation properties of virgin and recycled polypropylene
Plasticheskie Massy, No. 6, 29, pp. 4 45 Comparative analysis of the relaxation properties of virgin and recycled polypropylene A.V. Golovanov, M.N. Popova, 2 V.A. Markov, 2 O.V. Kovriga, 2 and A.A. Askadskii
More informationDetermining the rheological parameters of polyvinyl chloride, with change in temperature taken into account
Plasticheskie Massy, No. 1-2, 2016, pp. 30 33 Determining the rheological parameters of polyvinyl chloride, with change in temperature taken into account A.E. Dudnik, A.S. Chepurnenko, and S.V. Litvinov
More informationMacroscopic phenomena in the molecular mobility of polymers under external force fields
Plast. Massy, 2002, No. 10, p. 14-19 Macroscopic phenomena in the molecular mobility of polymers under external force fields Yu.V. Zelenev*, N.N. Peschanskaya** and V.I. Khromov* * The D.I.Mendeleev RKhTU,
More informationThe effect of an inorganic filler on the properties of high-density polyethylene
Plasticheskie Massy, No. 4, 2012, pp. 10 13 The effect of an inorganic filler on the properties of high-density polyethylene M.M. Kuliev and R.S. Ismaiilova Institute of Radiation Problems, Azerbaidzhan
More informationTOPIC 7. Polymeric materials
Universidad Carlos III de Madrid www.uc3m.es MATERIALS SCIENCE AND ENGINEERING TOPIC 7. Polymeric materials 1. Introduction Definition General characteristics Historic introduction Polymers: Examples 2.
More informationInfluence of the thermodynamic state of bisphenol A and aliphatic epoxy oligomers on the temperature dependences of Newtonian viscosity
Plasticheskie Massy, No. 4, 2009, pp. 34 40 Influence of the thermodynamic state of bisphenol A and aliphatic epoxy oligomers on the temperature dependences of Newtonian viscosity E.F. Kolesnikova, 1 P.G.
More informationRheological and mechanical properties of epoxy composites modified with montmorillonite nanoparticles
Plasticheskie Massy, No. 3, 2011, pp. 56 60 Rheological and mechanical properties of epoxy composites modified with montmorillonite nanoparticles S.O. Il in, 1 I.Yu. Gorbunova, 2 E.P. Plotnikova, 1 and
More informationMATERIALS SCIENCE TEST Part 1: Structure & Synthesis Topics
Fairfax Science Olympiad Tryouts 2018 Name: _ Score: /75 MATERIALS SCIENCE TEST Part 1: Structure & Synthesis Topics In questions 1-6, draw a diagram of the named functional group. Use R to denote the
More informationPHYSICS OF SOLID POLYMERS
PYSIS OF SOLID POLYMERS Professor Goran Ungar WU E, Department of hemical and Biological Engineering Recommended texts: G. Strobl, The Physics of Polymers, Springer 996 (emphasis on physics) U. Gedde,
More informationNE 125 L. Title Page
NE 125 L Title Page Name: Rajesh Swaminathan ID Number: 20194189 Partners Names: Clayton Szata 20193839 Sarvesh Varma 20203153 Experiment Number: 1 Experiment: Date Experiment was Started: Date Experiment
More informationChapter 14: Polymer Structures
Chapter 14: Polymer Structures ISSUES TO ADDRESS... What are the general structural and chemical characteristics of polymer molecules? What are some of the common polymeric materials, and how do they differ
More informationThe vibrational spectroscopy of polymers
D. I. BOWER Reader in Polymer Spectroscopy Interdisciplinary Research Centre in Polymer Science & Technology Department of Physics, University of Leeds W.F. MADDAMS Senior Visiting Fellow Department of
More informationInfluence of functionality of novolac phenol formaldehyde resins on the kinetics of the curing of epoxy resins
Plasticheskie Massy, No. 1, 1, pp. 1 17 Influence of functionality of novolac phenol formaldehyde resins on the kinetics of the curing of epoxy resins Yu. N. Smirnov and V. P. Volkov Institute of Chemical
More informationLecture No. (1) Introduction of Polymers
Lecture No. (1) Introduction of Polymers Polymer Structure Polymers are found in nature as proteins, cellulose, silk or synthesized like polyethylene, polystyrene and nylon. Some natural polymers can also
More informationModelling of viscoelastic properties of a curing adhesive
Computational Methods and Experiments in Materials Characterisation III 241 Modelling of viscoelastic properties of a curing adhesive J. de Vreugd 1, K. M. B. Jansen 1, L. J. Ernst 1 & J. A. C. M. Pijnenburg
More informationMSE 383, Unit 3-3. Joshua U. Otaigbe Iowa State University Materials Science & Engineering Dept.
Dynamic Mechanical Behavior MSE 383, Unit 3-3 Joshua U. Otaigbe Iowa State University Materials Science & Engineering Dept. Scope Why DMA & TTS? DMA Dynamic Mechanical Behavior (DMA) Superposition Principles
More informationHydrocarbon Molecules Polymer Molecules The Chemistry of Polymer Molecules
CHAPTER 14 POLYMER STRUCTURES PROBLEM SOLUTIONS Hydrocarbon Molecules Polymer Molecules The Chemistry of Polymer Molecules 14.1 On the basis of the structures presented in this chapter, sketch repeat unit
More informationChapter 13 - Polymers Introduction
Chapter 13 - Polymers Introduction I. Nomenclature A. Polymer/Macromolecule polymer - nonmetallic material consisting of large molecules composed of many repeating units - from Greek: poly (many) and meros
More informationAnalysis and modelling of dielectric relaxation data using DCALC
Analysis and modelling of dielectric relaxation data using DCALC Michael Wübbenhorst Short course, Lodz, 8 October 2008 Part I dielectric theory, representation of data Schedule 1 st session (8 October
More informationMaterials of Engineering ENGR 151 POLYMER STRUCTURES
Materials of Engineering ENGR 151 POLYMER STRUCTURES LEARNING OBJECTIVES Understand different molecular and crystal structures of polymers What are the general structural and chemical characteristics of
More informationStructure, dynamics and heterogeneity: solid-state NMR of polymers. Jeremy Titman, School of Chemistry, University of Nottingham
Structure, dynamics and heterogeneity: solid-state NMR of polymers Jeremy Titman, School of Chemistry, University of Nottingham Structure, dynamics and heterogeneity Structure Dynamics conformation, tacticity,
More informationGel formation in a centrifugal field
Plasticheskie Massy, No. 4, 2004, pp. 38 41 Gel formation in a centrifugal field L. R. Guseva, K. G. Kostarev, and T. M. Yudina Institute of Continuum Mechanics of the Urals Section of the Russian Academy
More informationMATERIALS SCIENCE POLYMERS
POLYMERS 1) Types of Polymer (a) Plastic Possibly the largest number of different polymeric materials come under the plastic classification. Polyethylene, polypropylene, polyvinyl chloride, polystyrene,
More information2. Amorphous or Crystalline Structurally, polymers in the solid state may be amorphous or crystalline. When polymers are cooled from the molten state
2. Amorphous or Crystalline Structurally, polymers in the solid state may be amorphous or crystalline. When polymers are cooled from the molten state or concentrated from the solution, molecules are often
More informationAtoms, electrons and Solids
Atoms, electrons and Solids Shell model of an atom negative electron orbiting a positive nucleus QM tells that to minimize total energy the electrons fill up shells. Each orbit in a shell has a specific
More informationPOLYMER SCIENCE : lecture 1. Dr. Hanaa J. Alshimary Second class Poly. Eng. Dep. Introduction of Polymers Polymer poly mer Monomer Polymerization
Introduction of Polymers Polymer - The word polymer is the Greek word : poly means many and mer means unit or parts, A Polymer is a large molecule that comprises repeating structural units joined by the
More informationChapter 2: INTERMOLECULAR BONDING (4rd session)
Chapter 2: INTERMOLECULAR BONDING (4rd session) ISSUES TO ADDRESS... Secondary bonding The structure of crystalline solids 1 REVIEW OF PREVIOUS SESSION Bonding forces & energies Interatomic vs. intermolecular
More informationDielectric characteristics of glass fibre reinforced plastics and their components
Plasticheskie Massy, No. 11, 2004, pp. 20 22 Dielectric characteristics of lass fibre reinforced plastics and their components V. I. Sokolov, S. I. Shalunov, I. G. Gurtovnik, L. G. Mikheeva, and I. D.
More informationAn Introduction to Polymer Physics
An Introduction to Polymer Physics David I. Bower Formerly at the University of Leeds (CAMBRIDGE UNIVERSITY PRESS Preface Acknowledgements xii xv 1 Introduction 1 1.1 Polymers and the scope of the book
More informationMechanical properties of polymers: an overview. Suryasarathi Bose Dept. of Materials Engineering, IISc, Bangalore
Mechanical properties of polymers: an overview Suryasarathi Bose Dept. of Materials Engineering, IISc, Bangalore UGC-NRCM Summer School on Mechanical Property Characterization- June 2012 Overview of polymer
More informationDIELECTRIC SPECTROSCOPY. & Comparison With Other Techniques
DIELECTRIC SPECTROSCOPY & Comparison With Other Techniques DIELECTRIC SPECTROSCOPY measures the dielectric and electric properties of a medium as a function of frequency (time) is based on the interaction
More informationStress Relaxation Behaviour of PALFnDPE Composites
Chapter 7 Stress Relaxation Behaviour of PALFnDPE Composites The results presented in this chapter have been communicated for publication to Journal of Reinforced Plastics and Composites. 7.1 Introduction
More informationIn situ Experiments in Material Science:
In situ Experiments in Material Science: Rheo-Saxs, Rheo-Dielectric, Rheo-NMR, In situ-nmr Prof. Dr. M. Wilhelm Institute of Chemical and Polymer Chemistry Manfred.Wilhelm@kit.edu Fourier Transform-Rheology
More informationThe particle size and shape of polyaniline in aqueous solutions of poly-(n-vinylpyrrolidone)
Plasticheskie Massy, No. 1, 2013, pp. 10 14 The particle size and shape of polyaniline in aqueous solutions of poly-(n-vinylpyrrolidone) S.V. Osadchenko, Ya.O. Mezhuev, Yu.V. Korshak, and M.I. Shtil man
More informationEffect of crystallinity on properties. Melting temperature. Melting temperature. Melting temperature. Why?
Effect of crystallinity on properties The morphology of most polymers is semi-crystalline. That is, they form mixtures of small crystals and amorphous material and melt over a range of temperature instead
More information(Refer Slide Time: 00:58)
Nature and Properties of Materials Professor Bishak Bhattacharya Department of Mechanical Engineering Indian Institute of Technology Kanpur Lecture 18 Effect and Glass Transition Temperature In the last
More informationConclusion and Future Work
Chapter 7 7. Chapter 7 and Future Work Chapter 7 Abstract This chapter gives the details of correlations of the spectroscopic investigation results with those available from other studies and also summarizes
More informationFeatures of processes of adhesion of polymer solutions to metallic substrates
Plasticheskie Massy, No. 8, 200, pp. 19 22 Features of processes of adhesion of polymer solutions to metallic substrates M. Yu. Dolomatov and M. Yu. Timofeeva Ufa Technological Service Institute Selected
More informationPolymers and nano-composites
Polymers and nano-composites Michael Wübbenhorst Laboratorium voor Akoestiek en Thermische Fysica, Katholieke Universiteit Leuven Celestijnenlaan 200D, B-3001 Leuven, http://fys.kuleuven.be/atf Tutorial:
More informationChapter 5: Molecular Scale Models for Macroscopic Dynamic Response. Fluctuation-Dissipation Theorem:
G. R. Strobl, Chapter 6 "The Physics of Polymers, 2'nd Ed." Springer, NY, (1997). R. B. Bird, R. C. Armstrong, O. Hassager, "Dynamics of Polymeric Liquids", Vol. 2, John Wiley and Sons (1977). M. Doi,
More informationPOLYMER STRUCTURES ISSUES TO ADDRESS...
POLYMER STRUTURES ISSUES TO ADDRESS... What are the basic microstructural features? ow are polymer properties effected by molecular weight? ow do polymeric crystals accommodate the polymer chain? Melting
More informationBroadband Dielectric Spectroscopy as a Tool for Polymer Analysis
Broadband Dielectric Spectroscopy as a Tool for Polymer Analysis September 13, 2011 Yoshimichi OHKI Waseda University 1 INTRODUCTION Dielectric behavior of a polymer various kinetic motions displacement,
More informationSCH4U Synthesis and Polymers. Synthesis Reactions and Addition and Condensation Polymers
SCH4U Synthesis and Polymers Synthesis Reactions and Addition and Condensation Polymers ADDITION POLYMERS ADDITION POLYMERS A + A + A + A A A A A monomers polymer + + + ethylene (ethene) polyethylene
More informationInternational Polymer Science and Technology
Page 1 of 11 SMITHERS GROUP MENU International Polymer Science and Authors Instructions for Authors Access Logged into International Polymer Science and. Click Here To Logout Back Search Search Journals
More informationAbvanced Lab Course. Dynamical-Mechanical Analysis (DMA) of Polymers
Abvanced Lab Course Dynamical-Mechanical Analysis (DMA) of Polymers M211 As od: 9.4.213 Aim: Determination of the mechanical properties of a typical polymer under alternating load in the elastic range
More informationjournal of August 2006 physics pp
PRAMANA c Indian Academy of Sciences Vol. 67, No. 2 journal of August 2006 physics pp. 375 381 Chain length effect on dynamical structure of poly(vinyl pyrrolidone) polar solvent mixtures in dilute solution
More informationIII. Molecular Structure Chapter Molecular Size Size & Shape
III. Molecular Structure Chapter 3. 3. Molecular Size Size & Shape Molecular Structure (1)Molecular Size & Shape Size : molecular weight molecular weight distribution Shape : branching (2) Molecular Flexibility
More informationInternational Polymer Science and Technology
Page 1 of 14 SMITHERS GROUP MENU International Polymer Science and Authors Instructions for Authors Access Logged into International Polymer Science and. Click Here To Logout Back Search Search Journals
More informationMECHANICAL PROPERTIES OF MATERIALS
1 MECHANICAL PROPERTIES OF MATERIALS Pressure in Solids: Pressure in Liquids: Pressure = force area (P = F A ) 1 Pressure = height density gravity (P = hρg) 2 Deriving Pressure in a Liquid Recall that:
More informationMaterials and Devices in Electrical Engineering
Examination WS 02/03 Materials and Devices in Electrical Engineering Monday 17 th of March, 9:00 11:00, International Department, SR. 203 Notice 1. It is allowed to use any kind of aids (books, scripts,
More informationChapter 6: The Rouse Model. The Bead (friction factor) and Spring (Gaussian entropy) Molecular Model:
G. R. Strobl, Chapter 6 "The Physics of Polymers, 2'nd Ed." Springer, NY, (1997). R. B. Bird, R. C. Armstrong, O. Hassager, "Dynamics of Polymeric Liquids", Vol. 2, John Wiley and Sons (1977). M. Doi,
More informationDielectric Properties of Solids
Dielectric Properties of Solids Electric polarization In an insulator the electrons are so tightly bound that at ordinary temperatures they cannot be dislodged either by thermal vibrations or with ordinary
More informationImprovement of Carbon Nanotubes Dispersivity in Poly(Styrene/Methacrylate) Composites by Chemical Functionalization
OPEN ACCESS http://sciforum.net/conference/ecm-1 Proceedings Paper Improvement of Carbon Nanotubes Dispersivity in Poly(Styrene/Methacrylate) Composites by Chemical Functionalization Fabio Faraguna, Elvira
More informationQuiz 1 Introduction to Polymers
090109 Quiz 1 Introduction to Polymers In class we discussed the definition of a polymer first by comparing polymers with metals and ceramics and then by noting certain properties of polymers that distinguish
More informationRelationship between the Mechanical and Ultrasound Properties of Polymer Materials
ECNDT 006 - We... Relationship between the Mechanical and Ultrasound Properties of Polymer Materials Jarlath MC HUGH, Joachim DÖRING, Wolfgang STARK, BAM, Berlin, Germany Jean Luc GUEY, Imasonic, Besancon,
More informationSteric stabilization. Dispersions in liquids: suspensions, emulsions, and foams ACS National Meeting April 9 10, 2008 New Orleans
Steric stabilization Dispersions in liquids: suspensions, emulsions, and foams ACS National Meeting April 9 10, 2008 New Orleans Rates of flocculation Strength of interparticle forces The time for half
More informationSupporting Information for
Supporting Information for Metal-Catalyzed Transesterification for Healing and Assembling of Thermosets Mathieu Capelot, Damien Montarnal, François Tournilhac, Ludwik Leibler* I. Epoxy-acid and epoxy-anhydride
More informationIntroduction to Engineering Materials ENGR2000 Chapter 14: Polymer Structures. Dr. Coates
Introduction to Engineering Materials ENGR2000 Chapter 14: Polymer Structures Dr. Coates 14.1 Introduction Naturally occurring polymers Wood, rubber, cotton, wool, leather, silk Synthetic polymers Plastics,
More informationMicrowave dielectric relaxation study of poly (methyl methacrylate) and polysulphone in dilute solutions
Indian Journal of Pure & Applied Physics Vol. 44, July 006, pp. 548-553 Microwave dielectric relaxation study of poly (methyl methacrylate) and polysulphone in dilute solutions A Tanwar, K K Gupta, P J
More informationMaterial Chemistry KJM 3100/4100. Synthetic Polymers (e.g., Polystyrene, Poly(vinyl chloride), Poly(ethylene oxide))
Material Chemistry KJM 3100/4100 Lecture 1. Soft Materials: Synthetic Polymers (e.g., Polystyrene, Poly(vinyl chloride), Poly(ethylene oxide)) Biopolymers (e.g., Cellulose derivatives, Polysaccharides,
More informationPart III : M6 Polymeric Materials
16/1/004 Part III : M6 Polymeric Materials Course overview, motivations and objectives Isolated polymer chains Dr James Elliott 1.1 Course overview Two-part course building on Part IB and II First 6 lectures
More informationBROADBAND DIELECTRIC SPECTROSCOPY - BASICS AND SELECTED APPLICATIONS
11.9.16 BROADBAND DIELECTRIC SPECTROSCOPY - BASICS AND SELECTED APPLICATIONS Andreas Schönhals 9 th International Conference on Broadband Dielectric Spectroscopy and its Applications September 11-16, 16
More informationNote: Brief explanation should be no more than 2 sentences.
Her \Hmher UNIVERSITY OF TORONTO FACULTY OF APPLIED SCIENCE AND ENGINEERING FINAL EXAMINATION, April 26, 2017 DURATION: 2 and /2 hrs MSE245 - HiS - Second Year - MSE Organic Material Chemistry & Processing
More informationTransduction Based on Changes in the Energy Stored in an Electrical Field
Lecture 7-1 Transduction Based on Changes in the Energy Stored in an Electrical Field - Electrostriction The electrostrictive effect is a quadratic dependence of strain or stress on the polarization P
More informationQENS in the Energy Domain: Backscattering and Time-of
QENS in the Energy Domain: Backscattering and Time-of of-flight Alexei Sokolov Department of Polymer Science, The University of Akron Outline Soft Matter and Neutron Spectroscopy Using elastic scattering
More informationPolymers are high molecular mass macromolecules composed of repeating structural
Question 15.1: Explain the terms polymer and monomer. Polymers are high molecular mass macromolecules composed of repeating structural units derived from monomers. Polymers have a high molecular mass (10
More informationPeriodic table with the elements associated with commercial polymers in color.
Polymers 1. What are polymers 2. Polymerization 3. Structure features of polymers 4. Thermoplastic polymers and thermosetting polymers 5. Additives 6. Polymer crystals 7. Mechanical properties of polymers
More informationMechanical Properties of Polymers. Scope. MSE 383, Unit 3-1. Joshua U. Otaigbe Iowa State University Materials Science & Engineering Dept.
Mechanical Properties of Polymers Scope MSE 383, Unit 3-1 Joshua U. Otaigbe Iowa State University Materials Science & Engineering Dept. Structure - mechanical properties relations Time-dependent mechanical
More informationThe Effects of Irradiation Technologies on Some Polymers commonly used in SUDs
Engineering Conferences International ECI Digital Archives Single-Use Technologies: Bridging Polymer Science to Biotechnology Applications Proceedings Fall 10-19-2015 The Effects of Irradiation Technologies
More informationAPPLICATIONS OF THERMAL ANALYSIS IN POLYMER AND COMPOSITES CHARACTERIZATION. Wei Xie TA Instruments
APPLICATIONS OF THERMAL ANALYSIS IN POLYMER AND COMPOSITES CHARACTERIZATION Wei Xie TA Instruments Abstract Thermal Analysis is the generic name for a series of measurement techniques traditionally used
More informationPiezo materials. Actuators Sensors Generators Transducers. Piezoelectric materials may be used to produce e.g.: Piezo materials Ver1404
Noliac Group develops and manufactures piezoelectric materials based on modified lead zirconate titanate (PZT) of high quality and tailored for custom specifications. Piezoelectric materials may be used
More informationRheological And Dielectric Characterization of Thermosetting Polymers. Jeffrey Gotro, Ph.D.
Rheological And Dielectric Characterization of Thermosetting Polymers Outline Introduction Oscillatory parallel plate rheometry Dynamic dielectric measurements Simultaneous dynamic mechanical/dielectric
More informationAtomic and molecular interaction forces in biology
Atomic and molecular interaction forces in biology 1 Outline Types of interactions relevant to biology Van der Waals interactions H-bond interactions Some properties of water Hydrophobic effect 2 Types
More informationChapter 6 ELECTRICAL CONDUCTIVITY ANALYSIS
Chapter 6 ELECTRICAL CONDUCTIVITY ANALYSIS CHAPTER-6 6.1 Introduction The suitability and potentiality of a material for device applications can be determined from the frequency and temperature response
More informationStatistical Thermodynamics of DNA Denaturation. processes
Statistical Thermodynamics of DNA Denaturation processes Course: Statistical Thermodynamics Advisor: Prof. Raissa D Souza Spring quarter 2012 By: Sebastian Frey 1 Nomenclature F Free Energy [J] x Coordinate
More informationReal-time UV cure monitoring
Real-time UV cure monitoring - Dielectric and infrared spectroscopy analyses show close linear correlation - Khalid Zahouily, Christian Decker, Erwin Kaisersberger, Michael Gruener. The photopolymerization
More informationScale, structure and behaviour
Scale, structure and behaviour Lecture 2 MTX9100 Nanomaterjalid OUTLINE -How are crystals structured? -Why and how does nanoworld differ from the world we live in? -When does size matter? What is the smallest
More informationCharacterisation of Crosslinks in Vulcanised Rubbers: From Simple to Advanced Techniques
Characterisation of Crosslinks in Vulcanised Rubbers: From Simple to Advanced Techniques K.L. Mok* and A.H. Eng** *Malaysian Rubber Board, Paper Presenter **Malaysian Institute of Chemistry 1 Rubber &
More informationVISCOELASTIC PROPERTIES OF POLYMERS
VISCOELASTIC PROPERTIES OF POLYMERS John D. Ferry Professor of Chemistry University of Wisconsin THIRD EDITION JOHN WILEY & SONS New York Chichester Brisbane Toronto Singapore Contents 1. The Nature of
More informationPIEZOELECTRIC TECHNOLOGY PRIMER
PIEZOELECTRIC TECHNOLOGY PRIMER James R. Phillips Sr. Member of Technical Staff CTS Wireless Components 4800 Alameda Blvd. N.E. Albuquerque, New Mexico 87113 Piezoelectricity The piezoelectric effect is
More informationAtomic Force Microscopy imaging and beyond
Atomic Force Microscopy imaging and beyond Arif Mumtaz Magnetism and Magnetic Materials Group Department of Physics, QAU Coworkers: Prof. Dr. S.K.Hasanain M. Tariq Khan Alam Imaging and beyond Scanning
More informationShear rheology of polymer melts
Shear rheology of polymer melts Dino Ferri dino.ferri@versalis.eni.com Politecnico Alessandria di Milano, 14/06/2002 22 nd October 2014 Outline - Review of some basic rheological concepts (simple shear,
More informationCOMPOSITE MATERIALS. Asst. Prof. Dr. Ayşe KALEMTAŞ
COMPOSITE MATERIALS Office ours: Tuesday, 16:30-17:30 akalemtas@mu.edu.tr, akalemtas@gmail.com Phone: +90 252 211 19 17 Metallurgical and Materials Engineering Department ISSUES TO ADDRESS Polymers Applications
More informationMalleable, Mechanically Strong, and Adaptive Elastomers. Enabled by Interfacial Exchangeable Bonds
Malleable, Mechanically Strong, and Adaptive Elastomers Enabled by Interfacial Exchangeable Bonds Zhenghai Tang, Yingjun Liu, Baochun Guo,*, and Liqun Zhang*, Department of Polymer Materials and Engineering,
More informationChap. 7. Dielectric Materials and Insulation
Chap. 7. Dielectric Materials and Insulation - The parallel plate capacitor with free space as an insulator: - The electric dipole moment for a pair of opposite changes +Q and -Q separated by a finite
More informationInfrared Spectroscopy
Infrared Spectroscopy IR Spectroscopy Used to identify organic compounds IR spectroscopy provides a 100% identification if the spectrum is matched. If not, IR at least provides information about the types
More informationTemperature-Frequency Characteristics of Dielectric Properties of Compositions LDPE + xvol%bi2te3
Open Journal of Organic Polymer Materials, 2016, 6, 25-29 Published Online January 2016 in SciRes. http://www.scirp.org/journal/ojopm http://dx.doi.org/10.4236/ojopm.2016.61003 Temperature-Frequency Characteristics
More informationElectronic materials and components-polymer types
Introduction Electronic materials and components-polymer types Polymer science is a broad field that includes many types of materials which incorporate long chain structures with many repeated units. One
More informationThe functionality of a monomer is the number of binding sites that is/are present in that monomer.
Question 15.1: Explain the terms polymer and monomer. Polymers are high molecular mass macromolecules composed of repeating structural units derived from monomers. Polymers have a high molecular mass (10
More informationLecture contents Review: Few concepts from physics Electric field
1 Lecture contents Review: Few concepts from physics Electric field Coulomb law, Gauss law, Poisson equation, dipole, capacitor Conductors and isolators 1 Electric current Dielectric constant Overview
More informationThe synthesis of polyvinyl chloride and its copolymers with the participation of a binuclear iron complex
Plasticheskie Massy, No. 11, 2012, pp. 12 16 The synthesis of polyvinyl chloride and its copolymers with the participation of a binuclear iron complex M.V. Pavlovskaya, E.S. Kotlova, and D.F. Grishin N.I.
More informationStudies on dielectric properties of a conducting polymer nanocomposite system
Indian Journal of Engineering & Materials Sciences Vol. 15, August 2008, pp. 347-351 Studies on dielectric properties of a conducting polymer nanocomposite system Saumya R Mohapatra, Awalendra K Thakur*
More informationP O L Y M E R S. The Academic Support Daytona State College (Science 106, Page 1 of 25
P O L Y M E R S The Academic Support Center @ Daytona State College (Science 106, Page 1 of 25 POLYMERS Polymers are large, long-chain molecules. found in nature, including cellulose in plants, starches
More informationSTRUCTURAL DYNAMICS AND INTERFACIAL PROPERTIES OF ELASTOMER NANO-COMPOSITES
STRUCTURAL DYNAMICS AND INTERFACIAL PROPERTIES OF ELASTOMER NANO-COMPOSITES M. Klüppel, J. Fritzsche Deutsches Institut für Kautschuktechnologie e.v. Eupener Straße 33, D-30519 Hannover, Germany Manfred.Klueppel@DIKautschuk.de
More informationLecture "Molecular Physics/Solid State physics" Winterterm 2013/2014 Prof. Dr. F. Kremer Outline of the lecture on
Lecture "Molecular Physics/Solid State physics" Winterterm 013/014 Prof. Dr. F. Kremer Outline of the lecture on 7.1.014 The spectral range of Broadband Dielectric Spectroscopy (BDS) (THz -
More informationThermal and UV-curing Behavior of Inks, Adhesives, and Coatings by Photo-, In-situ DEA and DMA.
Thermal and UV-curing Behavior of Inks, Adhesives, and Coatings by Photo-, In-situ DEA and DMA. Dr. Gilles Widawski, Netzsch Instruments North America, Burlington, MA, USA Dr. Stephan Knappe, NETZSCH-Gerätebau
More informationPolymers and Composite Materials
Polymers and omposite Materials Shibu G. Pillai hemical Engineering Department shibu.pillai@nirmauni.ac.in ontents lassification of Polymers Types of polymerization Elastomers/ Rubber Advanced Polymeric
More information