CE-R14 SERIES 1. PRODUCT APPEARANCE 2. OUTLINE DRAWING SPECIFICATION. Part Number Chip Material Color of Emission Lens Type Viewing Angle

Transcription

1 1 SPECIFICATION CE-R14 SERIES 1. PRODUCT APPEARANCE 2. OUTLINE DRAWING Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25mm (0.01 ) unless otherwised noted. 3. Specifi cations are subject to change without notice. Part Number Chip Material Color of Emission Lens Type Viewing Angle CE-R14 GaN White Yellow Tint 120

2 2 PERFORMANCE PARAMETERS - ABSOLUTE MAXIMUM RATINGS (TA=25 C) ITEM SYMBOL RATING UNIT Power Dissipation P 30.2 W Forward Current I F 1440 ma Reverse Voltage Operating Temperature Storage Temperature Junction Temperature Thermal Resistance V R 30 T opr - 30 ~ + 85 T stg - 40 ~ T jmax 125 RJ-C 3.5 V /W Note: *1. Forward current allows maximum surge current 10ms. *2. Power dissipation and forward current are the values when the LED is used within the range of the derating curve in this data sheet.

3 3 ELECTRICAL-OPTICAL CHARACTERISTICS (Ta=25) ** common PARAMETER SYMBOL CONDITION MIN. TYP. MAX. UNIT Forward Voltage *1 V F I F =720mA V Beam Angle 120 Deg ** Color Temp K ** Color Rendering Index *3 Ra 80 W W 1 W 2 W 3 Luminous Flux *2 Φ lm Luminous Efficiency η I F =720mA lm/w Luminous Flux *2 Φ lm Luminous Efficiency η lm/w Luminous Flux *2 Φ lm Luminous Efficiency η lm/w ** Color Temp K ** Color Rendering Index *3 Ra 80 D D 1 D 2 D 3 Luminous Flux *2 Φ lm Luminous Efficiency η I F =720mA lm/w Luminous Flux *2 Φ lm Luminous Efficiency η lm/w Luminous Flux *2 Φ lm Luminous Efficiency η lm/w ** Color Temp K ** Color Rendering Index *3 Ra 80 C C 1 C 2 C 3 Luminous Flux *2 Φ lm Luminous Efficiency η I F =720mA lm/w Luminous Flux *2 Φ lm Luminous Efficiency η lm/w Luminous Flux *2 Φ lm Luminous Efficiency η lm/w (Note) Parameters is formulated based on shipping samples *1. After 20ms drive, measurement tolerance: ±3% *2. Monitored by ChromeLED 1m integrating sphere, after 20ms drive, measurement tolerance: ±10%. *3. Monitored by ChromeLED 1m integrating sphere, after 20ms drive, measurement tolerance: ±2

4 4 RELIABILITY TEST ITEMS AND TEST CONDITIONS NO. TEST ITEM TEST CONDITIONS RESULT T a = 25, I F = 720 ma 1000 hours(with Al 1 Continuous operation test hours(with Al fin) fin) T a = 80, T j =120, I F = 720 ma 1000 PASS 2 Low temperature storage T a = hours PASS 3 High temperature storage T a = hours PASS 4 Moisture resistance T a =60, 90%RH for 1000 hours PASS T a =-40 30minutes~100 30minutes, 5 Thermal shock PASS 100 cycle FAILURE CRITERIA NO. PARAMETER SYMBOL FAILURE CRITERIA 1 Forward Voltage V F V F > Initial value Luminous Flux Φ Ф < Initial value 0.7

5 5 CHARACTERISITCS DIAGRAM (TYP.)

6 6 CHROMATICITY COORDINATES REGIONAL K 3000K K CHROMATICITY CHROMATICITY COORDINATES COORDINATES Range (Tolerance: x,y ± 0.005) Chromaticity coordinates(if =720mA, Tc= 25) NO.1 NO.2 NO.3 NO.4 NO.5 x y Chromaticity Diagram Note: The tolerance of measurement at our tester is VF±3%, Dv±10%, Chromaticity(x,y)±0.005.

7 TECHNICAL DATA SHEET ATE-R14 SERIES <FOR TOPLIGHT COB MODULE> 7/ K CHROMATICITY COORDINATES (Tolerance: x,y ± 0.005) (IF =720mA, Tc= 25 ) Chromaticity coordinates Range NO.1 NO.2 NO.3 NO.4 NO.5 x y * The percentage of each rank in the shipment shall be determined by TOPLIGHT. Chromaticity Diagram Note: The tolerance of measurement at our tester is VF±3%, Dv±10%, Chromaticity(x,y)± A/3 ATE-R14 SERIES Revision issued in ChROMATiCiTY COORdiNATES REgiONAl k 5000K CHROMATICITY COORDINATES (Tolerance: x,y ± 0.005) (I F =400mA, T c = 25) Range Chromaticity coordinates NO.1 NO.2 NO.3 NO.4 NO.5 x y Chromaticity Diagram Note: The tolerance of measurement at our tester is VF±3%, Dv±10%, Chromaticity(x,y)±0.005.

8 8 CHROMATICITY COORDINATES REGIONAL K 6500K K CHROMATICITY CHROMATICITY COORDINATES COORDINATES (Tolerance: x,y ± 0.005) (IF =720mA, Tc= 25) Range Chromaticity coordinates NO.1 NO.2 NO.3 NO.4 NO.5 x y * The percentage of each rank in the shipment shall be determined by ChromeLED. Chromaticity Diagram Note: The tolerance of measurement at our tester is VF±3%, Dv±10%, Chromaticity(x,y)±0.005.