Chapter 3. Loop and Cut-set Analysis

Size: px
Start display at page:

Download "Chapter 3. Loop and Cut-set Analysis"

Transcription

1 Chapter 3. Loop and Cut-set Analysis By: FARHAD FARADJI, Ph.D. Assistant Professor, Electrical Engineering, K.N. Toosi University of Technology References: Basic Circuit Theory, by Ch. A. Desoer and E. S. Kuh, 1969

2 Chapter Contents 0. Introduction 1. Fundamental theorem of graph theory 2. Loop analysis 3. Cut-set analysis 4. Comments on loop and cut-set analysis 5. Relation between B and Q 6. Summary Electric Circuits 2 Chapter 3. Loop and Cut-set Analysis 2

3 0. Introduction o We have learned to perform systematically: node analysis of any LTI network, mesh analysis for any planar LTI network. o Here, we briefly, discuss 2 generalizations (variations) of these methods: cut-set analysis, loop analysis. o There are 2 reasons for studying loop and cut-set analysis: 1. These methods are much more flexible than mesh and node analysis, 2. They use concepts that are useful for writing state equations. Electric Circuits 2 Chapter 3. Loop and Cut-set Analysis 3

4 Chapter Contents 0. Introduction 1. Fundamental theorem of graph theory 2. Loop analysis 3. Cut-set analysis 4. Comments on loop and cut-set analysis 5. Relation between B and Q 6. Summary Electric Circuits 2 Chapter 3. Loop and Cut-set Analysis 4

5 1. Fundamental theorem of graph theory o Let G be a connected graph and T a subgraph of G. o T is a tree of connected graph G if: 1. subgraph T is connected, 2. it contains all nodes of G, and 3. it contains no loops. o Given a connected graph G and a tree T: branches of T are called tree branches, branches of G not in T are called links (cotree branches, or chords). o If a graph has n t nodes and has a single branch connecting every pair of nodes, then it has trees: when n t = 5, there are 125 trees, when n t = 10, there are 10 8 trees. Electric Circuits 2 Chapter 3. Loop and Cut-set Analysis 5

6 1. Fundamental theorem of graph theory Electric Circuits 2 Chapter 3. Loop and Cut-set Analysis 6

7 1. Fundamental theorem of graph theory THEOREM o Given a connected graph G of n t nodes and b branches, and a tree T of G: 1. There is a unique path along tree between any pair of nodes. 2. There are n t -1 tree branches and b-n t +1 links. 3. Every link of G and unique tree path between its nodes constitute a unique loop (fundamental loop associated with link). 4. Every tree branch of T together with some links defines a unique cut set of G (fundamental cut set associated with tree branch). o For proof, please refer to pages 478 and 479 of book. Electric Circuits 2 Chapter 3. Loop and Cut-set Analysis 7

8 1. Fundamental theorem of graph theory COROLLARY o Suppose: G has n t nodes, b branches, and s separate parts, T 1, T 2,..., T s are trees of each separate part: Set {T 1, T 2,..., T s } is called a forest of G. Forest has n t -s branches, G has b-n t +s links. Remaining statements of theorem are true. Electric Circuits 2 Chapter 3. Loop and Cut-set Analysis 8

9 Chapter Contents 0. Introduction 1. Fundamental theorem of graph theory 2. Loop analysis 3. Cut-set analysis 4. Comments on loop and cut-set analysis 5. Relation between B and Q 6. Summary Electric Circuits 2 Chapter 3. Loop and Cut-set Analysis 9

10 2. Loop analysis 2.1. Two basic facts of loop analysis o Consider a connected graph with b branches and n t nodes. o Pick an arbitrary tree T. o There are n = n t -1 tree branches and l = b-n links. o Number branches as follows: links first from 1 to l, tree branches next from l+1 to b. o Every link defines a fundamental loop: loop formed by link and unique tree path between nodes of that link. Electric Circuits 2 Chapter 3. Loop and Cut-set Analysis 10

11 2. Loop analysis 2.1. Two basic facts of loop analysis o b = 8, n t = 5, n = 4, and l = 4. o To apply KVL to each fundamental loop, we adopt a reference direction for loop which agrees with reference direction of link which defines that fundamental loop: fundamental loop 1 has same orientation as link 1. o KVL equations can be written for 4 fundamental loops in terms of branch voltage. Electric Circuits 2 Chapter 3. Loop and Cut-set Analysis 11

12 2. Loop analysis 2.1. Two basic facts of loop analysis Electric Circuits 2 Chapter 3. Loop and Cut-set Analysis 12

13 2. Loop analysis 2.1. Two basic facts of loop analysis o l linear homogeneous algebraic equations in v 1, v 2,, v b obtained by applying KVL to each fundamental loop constitute a set of l linearly independent equations. o B is an l b matrix called fundamental loop matrix. Electric Circuits 2 Chapter 3. Loop and Cut-set Analysis 13

14 2. Loop analysis 2.1. Two basic facts of loop analysis o Since: each fundamental loop includes one link only, orientations of loop and link are picked to be same, number of links are 1, 2,..., l, tree branches are l +1, l +2,..., b, matrix B has form: o 1 l designates a unit matrix of order l. o F designates a rectangular matrix of l rows and n columns. o Rank of B is l. Electric Circuits 2 Chapter 3. Loop and Cut-set Analysis 14

15 2. Loop analysis 2.1. Two basic facts of loop analysis o KCL implies that any current that comes to a node must leave this node. o Call i 1, i 2,..., i l currents in l links of tree T. o Each of these currents flowing in its respective fundamental loop. o Each tree branch current is superposition of one or more loop currents. Electric Circuits 2 Chapter 3. Loop and Cut-set Analysis 15

16 2. Loop analysis 2.1. Two basic facts of loop analysis Electric Circuits 2 Chapter 3. Loop and Cut-set Analysis 16

17 2. Loop analysis 2.2. Loop analysis for LTI networks o For simplicity, consider a linear time-invariant resistive network with b branches, n t nodes, and one separate part. o Extension to general case is exactly the same as generalization discussed in previous chapter. o A typical branch is shown. o It includes independent sources. o Branch equations are of form: Electric Circuits 2 Chapter 2. Node and Mesh Analyses 17

18 2. Loop analysis 2.2. Loop analysis for LTI networks o Branch equations are written in matrix form as: o R is a diagonal branch resistance matrix of dimension b. o v s and j s are voltage source and current source vectors. Electric Circuits 2 Chapter 3. Loop and Cut-set Analysis 18

19 2. Loop analysis 2.2. Loop analysis for LTI networks o Z l is loop impedance matrix of order l. o e s is loop voltage source vector. o Loop impedance matrix has properties similar to those of mesh impedance matrix discussed in previous chapter. o R is symmetric. o Z l is symmetric. Electric Circuits 2 Chapter 3. Loop and Cut-set Analysis 19

20 2. Loop analysis 2.2. Loop analysis for LTI networks Example: Electric Circuits 2 Chapter 3. Loop and Cut-set Analysis 20

21 2. Loop analysis 2.2. Loop analysis for LTI networks Example: Electric Circuits 2 Chapter 3. Loop and Cut-set Analysis 21

22 2. Loop analysis 2.3. Properties of the loop impedance matrix o Analysis of a resistive network and sinusoidal steady-state analysis of a similar network are very closely related. o Main difference is in the appearance of phasors and impedances. 1. If network has no coupling elements: branch impedance matrix Z b (jω) is diagonal, loop impedance matrix Z l (jω) is symmetric. Electric Circuits 2 Chapter 3. Loop and Cut-set Analysis 22

23 2. Loop analysis 2.3. Properties of the loop impedance matrix 2. If network has no coupling elements, Z l (jω) can be written by inspection: a. z ii is equal to sum of impedances in loop i. z ii is called self-impedance of loop i. b. z ik is equal to plus or minus sum of impedances of branches common to loop i and to loop k. Plus sign applies if, in branches common to loop i and loop k, loop reference directions agree. Minus sign applies when they are opposite. 3. If all current sources are converted, by Thevenin's theorem, into voltage sources, forcing term e si is algebraic sum of all source voltages in loop i. Voltage sources whose reference direction pushes current in i th loop reference direction are assigned a positive sign, others a negative sign. 4. If network is resistive and if all its resistances are positive, det(z l ) > 0. Electric Circuits 2 Chapter 3. Loop and Cut-set Analysis 23

24 Chapter Contents 0. Introduction 1. Fundamental theorem of graph theory 2. Loop analysis 3. Cut-set analysis 4. Comments on loop and cut-set analysis 5. Relation between B and Q 6. Summary Electric Circuits 2 Chapter 3. Loop and Cut-set Analysis 24

25 3. Cut-set analysis 3.1. Two basic facts of cut-set analysis o Cut-set analysis is dual of loop analysis. o First, we pick a tree (T). o Next we number branches; as before, links range from 1 to l, tree-branches range from l+1 to b. o We know that every tree branch defines (for given tree) a unique fundamental cut set. o That cut set is made up: of links and of one tree branch (which defines cut set). Electric Circuits 2 Chapter 3. Loop and Cut-set Analysis 25

26 3. Cut-set analysis 3.1. Two basic facts of cut-set analysis o Let us number cut sets as follows: cut set 1 is associated with tree branch 5, cut set 2 with tree branch 6, etc. o For each fundamental cut set, we adopt a reference direction for cut set which agrees with that of tree branch defining cut set. Electric Circuits 2 Chapter 3. Loop and Cut-set Analysis 26

27 3. Cut-set analysis 3.1. Two basic facts of cut-set analysis o Under these conditions, if we apply KCL to 4 cut sets: Electric Circuits 2 Chapter 3. Loop and Cut-set Analysis 27

28 3. Cut-set analysis 3.1. Two basic facts of cut-set analysis o n linear homogeneous algebraic equations in j 1, j 2,..., j b obtained by applying KCL to each fundamental cut set constitute a set of n linearly independent equations. o KCL equations are of form: o Q = [q ik ] is an n b matrix and called fundamental cut-set matrix: Electric Circuits 2 Chapter 3. Loop and Cut-set Analysis 28

29 3. Cut-set analysis 3.1. Two basic facts of cut-set analysis E is an appropriate n l matrix with elements -1, +1, 0. 1 n is n n unit matrix. Q has a rank n. n fundamental cut-set equations in terms of branch currents are linearly independent. Electric Circuits 2 Chapter 3. Loop and Cut-set Analysis 29

30 3. Cut-set analysis 3.1. Two basic facts of cut-set analysis o From KVL, each branch voltage can be expressed as a linear combination of tree-branch voltages. o For convenience, let us label tree-branch voltages by e 1, e 2,..., e n : Electric Circuits 2 Chapter 3. Loop and Cut-set Analysis 30

31 3. Cut-set analysis 3.2. Cut-set analysis for LTI networks o For case of LTI resistive networks, branch equations are easily written in matrix form: o G is diagonal branch conductance matrix of dimension b. o j s and v s are source vectors. o KCL and KVL are: Electric Circuits 2 Chapter 3. Loop and Cut-set Analysis 31

32 3. Cut-set analysis 3.2. Cut-set analysis for LTI networks o Y q is cut-set admittance matrix. o i s is cut-set current source vector. o In scalar form, cut-set equations are: Electric Circuits 2 Chapter 3. Loop and Cut-set Analysis 32

33 3. Cut-set analysis 3.3. Properties of cut-set admittance matrix For sinusoidal steady-state analysis, cut-set admittance matrix Y q is: 1. If network has no coupling elements: branch admittance matrix Y b (jω) is diagonal, cut-set admittance matrix Y q (jω) is symmetric. 2. If network has no coupling elements, Y q (jω) can be written by inspection: a. y ii is equal to sum of admittances of branches of the i th cut set. b. y ik is equal to sum of all admittances of branches common to cut set i and cut set k when, in branches common to their 2 cut sets, their reference directions agree; otherwise, y ik is negative of that sum. Electric Circuits 2 Chapter 3. Loop and Cut-set Analysis 33

34 3. Cut-set analysis 3.3. Properties of cut-set admittance matrix 3. If all voltage sources are transformed to current sources, i sk is algebraic sum of all current sources in cut set k. Current sources whose reference direction is opposite to that of k th cut set reference direction are assigned a positive sign. All others are assigned a negative sign. 4. If network is resistive and if all its resistances are positive, det(y q ) > 0. Electric Circuits 2 Chapter 3. Loop and Cut-set Analysis 34

35 3. Cut-set analysis 3.3. Properties of cut-set admittance matrix Example: Electric Circuits 2 Chapter 3. Loop and Cut-set Analysis 35

36 Chapter Contents 0. Introduction 1. Fundamental theorem of graph theory 2. Loop analysis 3. Cut-set analysis 4. Comments on loop and cut-set analysis 5. Relation between B and Q 6. Summary Electric Circuits 2 Chapter 3. Loop and Cut-set Analysis 36

37 4. Comments on loop and cut-set analysis o Both loop analysis and cut-set analysis start with choosing a tree for given graph. o Since number of possible trees for a graph is usually large, 2 methods are extremely flexible. o They are more general than mesh analysis and node analysis. o Fundamental loops for particular tree coincide with 4 meshes of graph. o Thus, mesh currents are identical with fundamental loop currents. o Mesh analysis for this particular example is a special case of loop analysis. Electric Circuits 2 Chapter 3. Loop and Cut-set Analysis 37

38 4. Comments on loop and cut-set analysis o Fundamental cut sets for particular tree coincide with sets of branches connected to nodes 1, 2, 3, and 4. o If node 5 is picked as datum (reference) node, tree-branch voltages are identical with node-to-datum voltages. o Node analysis for this particular example is a special case of cut-set analysis. Electric Circuits 2 Chapter 3. Loop and Cut-set Analysis 38

39 4. Comments on loop and cut-set analysis o It should be pointed out that for this graph, meshes are not special cases of fundamental loops. o There exists no tree such that 5 meshes are fundamental loops. o Similarly, in this graph, if node 4 is picked as datum node, there exists no tree which gives tree-branch voltages identical to node-to-datum voltages. Electric Circuits 2 Chapter 3. Loop and Cut-set Analysis 39

40 4. Comments on loop and cut-set analysis o As far as relative advantages of cut-set analysis and loop analysis, conclusion is same as that between mesh analysis and node analysis. o It depends: on graph as well as on kind and number of sources in network. o For example, if number of tree branches (n) is much smaller than number of links (l), cut-set method is usually more efficient. o In previous chapter, duality applied only to planar graphs and planar networks (node and mesh analysis). o Now, duality extends to non planar graphs and networks: For example, cut sets and loops are dual concepts. Electric Circuits 2 Chapter 3. Loop and Cut-set Analysis 40

41 Chapter Contents 0. Introduction 1. Fundamental theorem of graph theory 2. Loop analysis 3. Cut-set analysis 4. Comments on loop and cut-set analysis 5. Relation between B and Q 6. Summary Electric Circuits 2 Chapter 3. Loop and Cut-set Analysis 41

42 5. Relation between B and Q o If we: start with an oriented graph G, pick any one of its trees, say T, write fundamental loop matrix B and fundamental cut-set matrix Q, we should expect to find a very close connection between B and Q. o B tells us which branch is in which fundamental loop. o Q tells us which branch is in which fundamental cut set. o Precise relation between B and Q is stated in following theorem. Electric Circuits 2 Chapter 3. Loop and Cut-set Analysis 42

43 5. Relation between B and Q THEOREM Call B fundamental loop matrix and Q fundamental cut-set matrix of same oriented graph G, and let both matrices pertain to same tree T; then: If we number links from 1 to l and number tree branches from l+1 to b, then: Product of l b matrix B and b n matrix Q T is l n zero matrix. Product of every row of B and every column of Q T is 0. Product of every row of Q by every column of B T is 0. Electric Circuits 2 Chapter 3. Loop and Cut-set Analysis 43

44 5. Relation between B and Q o Relation between B and Q is extremely useful. o Whenever we know one of these matrices, we can write other one by inspection. o Both matrices B and Q are uniquely specified by l n matrix F. Electric Circuits 2 Chapter 3. Loop and Cut-set Analysis 44

45 Chapter Contents 0. Introduction 1. Fundamental theorem of graph theory 2. Loop analysis 3. Cut-set analysis 4. Comments on loop and cut-set analysis 5. Relation between B and Q 6. Summary Electric Circuits 2 Chapter 3. Loop and Cut-set Analysis 45

46 6. Summary o Analogies between 4 methods of analysis deserve to be emphasized: o Each one of connection matrices A, M, Q, and B is of full rank. Electric Circuits 2 Chapter 3. Loop and Cut-set Analysis 46

Basic. Theory. ircuit. Charles A. Desoer. Ernest S. Kuh. and. McGraw-Hill Book Company

Basic. Theory. ircuit. Charles A. Desoer. Ernest S. Kuh. and. McGraw-Hill Book Company Basic C m ш ircuit Theory Charles A. Desoer and Ernest S. Kuh Department of Electrical Engineering and Computer Sciences University of California, Berkeley McGraw-Hill Book Company New York St. Louis San

More information

Chapter 10 Sinusoidal Steady State Analysis Chapter Objectives:

Chapter 10 Sinusoidal Steady State Analysis Chapter Objectives: Chapter 10 Sinusoidal Steady State Analysis Chapter Objectives: Apply previously learn circuit techniques to sinusoidal steady-state analysis. Learn how to apply nodal and mesh analysis in the frequency

More information

Network Topology-2 & Dual and Duality Choice of independent branch currents and voltages: The solution of a network involves solving of all branch currents and voltages. We know that the branch current

More information

Network Graphs and Tellegen s Theorem

Network Graphs and Tellegen s Theorem Networ Graphs and Tellegen s Theorem The concepts of a graph Cut sets and Kirchhoff s current laws Loops and Kirchhoff s voltage laws Tellegen s Theorem The concepts of a graph The analysis of a complex

More information

Chapter 10: Sinusoidal Steady-State Analysis

Chapter 10: Sinusoidal Steady-State Analysis Chapter 10: Sinusoidal Steady-State Analysis 10.1 10.2 10.3 10.4 10.5 10.6 10.9 Basic Approach Nodal Analysis Mesh Analysis Superposition Theorem Source Transformation Thevenin & Norton Equivalent Circuits

More information

Chapter 4. Techniques of Circuit Analysis

Chapter 4. Techniques of Circuit Analysis Chapter 4. Techniques of Circuit Analysis By: FARHAD FARADJI, Ph.D. Assistant Professor, Electrical Engineering, K.N. Toosi University of Technology http://wp.kntu.ac.ir/faradji/electriccircuits1.htm Reference:

More information

Sinusoidal Steady State Analysis (AC Analysis) Part I

Sinusoidal Steady State Analysis (AC Analysis) Part I Sinusoidal Steady State Analysis (AC Analysis) Part I Amin Electronics and Electrical Communications Engineering Department (EECE) Cairo University elc.n102.eng@gmail.com http://scholar.cu.edu.eg/refky/

More information

Preamble. Circuit Analysis II. Mesh Analysis. When circuits get really complex methods learned so far will still work,

Preamble. Circuit Analysis II. Mesh Analysis. When circuits get really complex methods learned so far will still work, Preamble Circuit Analysis II Physics, 8 th Edition Custom Edition Cutnell & Johnson When circuits get really complex methods learned so far will still work, but they can take a long time to do. A particularly

More information

Chapter 10 AC Analysis Using Phasors

Chapter 10 AC Analysis Using Phasors Chapter 10 AC Analysis Using Phasors 10.1 Introduction We would like to use our linear circuit theorems (Nodal analysis, Mesh analysis, Thevenin and Norton equivalent circuits, Superposition, etc.) to

More information

Electric Circuits II Sinusoidal Steady State Analysis. Dr. Firas Obeidat

Electric Circuits II Sinusoidal Steady State Analysis. Dr. Firas Obeidat Electric Circuits II Sinusoidal Steady State Analysis Dr. Firas Obeidat 1 Table of Contents 1 2 3 4 5 Nodal Analysis Mesh Analysis Superposition Theorem Source Transformation Thevenin and Norton Equivalent

More information

Systematic Circuit Analysis (T&R Chap 3)

Systematic Circuit Analysis (T&R Chap 3) Systematic Circuit Analysis (T&R Chap 3) Nodevoltage analysis Using the voltages of the each node relative to a ground node, write down a set of consistent linear equations for these voltages Solve this

More information

Basic Concepts of Graph Theory Cut-set Incidence Matrix Circuit Matrix Cut-set Matrix

Basic Concepts of Graph Theory Cut-set Incidence Matrix Circuit Matrix Cut-set Matrix Basic Concepts of Graph Theory Cut-set Incidence Matrix Circuit Matrix Cut-set Matrix Definition of Graph Definition: In a connected graph G of n nodes (vertices),the subgraph T that satisfies the following

More information

Module 2. DC Circuit. Version 2 EE IIT, Kharagpur

Module 2. DC Circuit. Version 2 EE IIT, Kharagpur Module 2 DC Circuit Lesson 5 Node-voltage analysis of resistive circuit in the context of dc voltages and currents Objectives To provide a powerful but simple circuit analysis tool based on Kirchhoff s

More information

Lecture Notes on DC Network Theory

Lecture Notes on DC Network Theory Federal University, Ndufu-Alike, Ikwo Department of Electrical/Electronics and Computer Engineering (ECE) Faculty of Engineering and Technology Lecture Notes on DC Network Theory Harmattan Semester by

More information

Notes for course EE1.1 Circuit Analysis TOPIC 10 2-PORT CIRCUITS

Notes for course EE1.1 Circuit Analysis TOPIC 10 2-PORT CIRCUITS Objectives: Introduction Notes for course EE1.1 Circuit Analysis 4-5 Re-examination of 1-port sub-circuits Admittance parameters for -port circuits TOPIC 1 -PORT CIRCUITS Gain and port impedance from -port

More information

Massachusetts Institute of Technology Department of Electrical Engineering and Computer Science : Circuits & Electronics Problem Set #1 Solution

Massachusetts Institute of Technology Department of Electrical Engineering and Computer Science : Circuits & Electronics Problem Set #1 Solution Massachusetts Institute of Technology Department of Electrical Engineering and Computer Science 6.2: Circuits & Electronics Problem Set # Solution Exercise. The three resistors form a series connection.

More information

UNIT 4 DC EQUIVALENT CIRCUIT AND NETWORK THEOREMS

UNIT 4 DC EQUIVALENT CIRCUIT AND NETWORK THEOREMS UNIT 4 DC EQUIVALENT CIRCUIT AND NETWORK THEOREMS 1.0 Kirchoff s Law Kirchoff s Current Law (KCL) states at any junction in an electric circuit the total current flowing towards that junction is equal

More information

Chapter 5. Department of Mechanical Engineering

Chapter 5. Department of Mechanical Engineering Source Transformation By KVL: V s =ir s + v By KCL: i s =i + v/r p is=v s /R s R s =R p V s /R s =i + v/r s i s =i + v/r p Two circuits have the same terminal voltage and current Source Transformation

More information

Linear graph theory. Basic definitions of linear graphs

Linear graph theory. Basic definitions of linear graphs Linear graph theory Linear graph theory, a branch of combinatorial mathematics has proved to be a useful tool for the study of large or complex systems. Leonhard Euler wrote perhaps the first paper on

More information

DC STEADY STATE CIRCUIT ANALYSIS

DC STEADY STATE CIRCUIT ANALYSIS DC STEADY STATE CIRCUIT ANALYSIS 1. Introduction The basic quantities in electric circuits are current, voltage and resistance. They are related with Ohm s law. For a passive branch the current is: I=

More information

Notes for course EE1.1 Circuit Analysis TOPIC 4 NODAL ANALYSIS

Notes for course EE1.1 Circuit Analysis TOPIC 4 NODAL ANALYSIS Notes for course EE1.1 Circuit Analysis 2004-05 TOPIC 4 NODAL ANALYSIS OBJECTIVES 1) To develop Nodal Analysis of Circuits without Voltage Sources 2) To develop Nodal Analysis of Circuits with Voltage

More information

EE 3120 Electric Energy Systems Study Guide for Prerequisite Test Wednesday, Jan 18, pm, Room TBA

EE 3120 Electric Energy Systems Study Guide for Prerequisite Test Wednesday, Jan 18, pm, Room TBA EE 3120 Electric Energy Systems Study Guide for Prerequisite Test Wednesday, Jan 18, 2006 6-7 pm, Room TBA First retrieve your EE2110 final and other course papers and notes! The test will be closed book

More information

QUESTION BANK SUBJECT: NETWORK ANALYSIS (10ES34)

QUESTION BANK SUBJECT: NETWORK ANALYSIS (10ES34) QUESTION BANK SUBJECT: NETWORK ANALYSIS (10ES34) NOTE: FOR NUMERICAL PROBLEMS FOR ALL UNITS EXCEPT UNIT 5 REFER THE E-BOOK ENGINEERING CIRCUIT ANALYSIS, 7 th EDITION HAYT AND KIMMERLY. PAGE NUMBERS OF

More information

Chapter 10: Sinusoids and Phasors

Chapter 10: Sinusoids and Phasors Chapter 10: Sinusoids and Phasors 1. Motivation 2. Sinusoid Features 3. Phasors 4. Phasor Relationships for Circuit Elements 5. Impedance and Admittance 6. Kirchhoff s Laws in the Frequency Domain 7. Impedance

More information

Sinusoids and Phasors

Sinusoids and Phasors CHAPTER 9 Sinusoids and Phasors We now begins the analysis of circuits in which the voltage or current sources are time-varying. In this chapter, we are particularly interested in sinusoidally time-varying

More information

Basic Electrical Circuits Analysis ECE 221

Basic Electrical Circuits Analysis ECE 221 Basic Electrical Circuits Analysis ECE 221 PhD. Khodr Saaifan http://trsys.faculty.jacobs-university.de k.saaifan@jacobs-university.de 1 2 Reference: Electric Circuits, 8th Edition James W. Nilsson, and

More information

6. MESH ANALYSIS 6.1 INTRODUCTION

6. MESH ANALYSIS 6.1 INTRODUCTION 6. MESH ANALYSIS INTRODUCTION PASSIVE SIGN CONVENTION PLANAR CIRCUITS FORMATION OF MESHES ANALYSIS OF A SIMPLE CIRCUIT DETERMINANT OF A MATRIX CRAMER S RULE GAUSSIAN ELIMINATION METHOD EXAMPLES FOR MESH

More information

4/27 Friday. I have all the old homework if you need to collect them.

4/27 Friday. I have all the old homework if you need to collect them. 4/27 Friday Last HW: do not need to turn it. Solution will be posted on the web. I have all the old homework if you need to collect them. Final exam: 7-9pm, Monday, 4/30 at Lambert Fieldhouse F101 Calculator

More information

Fall 2011 ME 2305 Network Analysis. Sinusoidal Steady State Analysis of RLC Circuits

Fall 2011 ME 2305 Network Analysis. Sinusoidal Steady State Analysis of RLC Circuits Fall 2011 ME 2305 Network Analysis Chapter 4 Sinusoidal Steady State Analysis of RLC Circuits Engr. Humera Rafique Assistant Professor humera.rafique@szabist.edu.pk Faculty of Engineering (Mechatronics)

More information

BFF1303: ELECTRICAL / ELECTRONICS ENGINEERING. Alternating Current Circuits : Basic Law

BFF1303: ELECTRICAL / ELECTRONICS ENGINEERING. Alternating Current Circuits : Basic Law BFF1303: ELECTRICAL / ELECTRONICS ENGINEERING Alternating Current Circuits : Basic Law Ismail Mohd Khairuddin, Zulkifil Md Yusof Faculty of Manufacturing Engineering Universiti Malaysia Pahang Alternating

More information

Sinusoidal Steady State Analysis (AC Analysis) Part II

Sinusoidal Steady State Analysis (AC Analysis) Part II Sinusoidal Steady State Analysis (AC Analysis) Part II Amin Electronics and Electrical Communications Engineering Department (EECE) Cairo University elc.n102.eng@gmail.com http://scholar.cu.edu.eg/refky/

More information

EE40 KVL KCL. Prof. Nathan Cheung 09/01/2009. Reading: Hambley Chapter 1

EE40 KVL KCL. Prof. Nathan Cheung 09/01/2009. Reading: Hambley Chapter 1 EE40 KVL KCL Prof. Nathan Cheung 09/01/2009 Reading: Hambley Chapter 1 Slide 1 Terminology: Nodes and Branches Node: A point where two or more circuit elements are connected Branch: A path that connects

More information

CHAPTER FOUR CIRCUIT THEOREMS

CHAPTER FOUR CIRCUIT THEOREMS 4.1 INTRODUCTION CHAPTER FOUR CIRCUIT THEOREMS The growth in areas of application of electric circuits has led to an evolution from simple to complex circuits. To handle the complexity, engineers over

More information

MAE140 - Linear Circuits - Fall 14 Midterm, November 6

MAE140 - Linear Circuits - Fall 14 Midterm, November 6 MAE140 - Linear Circuits - Fall 14 Midterm, November 6 Instructions (i) This exam is open book. You may use whatever written materials you choose, including your class notes and textbook. You may use a

More information

In this lecture, we will consider how to analyse an electrical circuit by applying KVL and KCL. As a result, we can predict the voltages and currents

In this lecture, we will consider how to analyse an electrical circuit by applying KVL and KCL. As a result, we can predict the voltages and currents In this lecture, we will consider how to analyse an electrical circuit by applying KVL and KCL. As a result, we can predict the voltages and currents around an electrical circuit. This is a short lecture,

More information

2 NETWORK FORMULATION

2 NETWORK FORMULATION NTWRK FRMUATN NTRDUCTRY RMARKS For performing any power system studies on the digital computer, the first step is to construct a suitable mathematical model of the power system network The mathematical

More information

3.1 Superposition theorem

3.1 Superposition theorem Many electric circuits are complex, but it is an engineer s goal to reduce their complexity to analyze them easily. In the previous chapters, we have mastered the ability to solve networks containing independent

More information

NETWORK ANALYSIS WITH APPLICATIONS

NETWORK ANALYSIS WITH APPLICATIONS NETWORK ANALYSIS WITH APPLICATIONS Third Edition William D. Stanley Old Dominion University Prentice Hall Upper Saddle River, New Jersey I Columbus, Ohio CONTENTS 1 BASIC CIRCUIT LAWS 1 1-1 General Plan

More information

Writing Circuit Equations

Writing Circuit Equations 2 C H A P T E R Writing Circuit Equations Objectives By the end of this chapter, you should be able to do the following: 1. Find the complete solution of a circuit using the exhaustive, node, and mesh

More information

CURRENT SOURCES EXAMPLE 1 Find the source voltage Vs and the current I1 for the circuit shown below SOURCE CONVERSIONS

CURRENT SOURCES EXAMPLE 1 Find the source voltage Vs and the current I1 for the circuit shown below SOURCE CONVERSIONS CURRENT SOURCES EXAMPLE 1 Find the source voltage Vs and the current I1 for the circuit shown below EXAMPLE 2 Find the source voltage Vs and the current I1 for the circuit shown below SOURCE CONVERSIONS

More information

CIRCUIT ANALYSIS TECHNIQUES

CIRCUIT ANALYSIS TECHNIQUES APPENDI B CIRCUIT ANALSIS TECHNIQUES The following methods can be used to combine impedances to simplify the topology of an electric circuit. Also, formulae are given for voltage and current division across/through

More information

Series & Parallel Resistors 3/17/2015 1

Series & Parallel Resistors 3/17/2015 1 Series & Parallel Resistors 3/17/2015 1 Series Resistors & Voltage Division Consider the single-loop circuit as shown in figure. The two resistors are in series, since the same current i flows in both

More information

Chapter 2 Direct Current Circuits

Chapter 2 Direct Current Circuits Chapter 2 Direct Current Circuits 2.1 Introduction Nowadays, our lives are increasingly dependent upon the availability of devices that make extensive use of electric circuits. The knowledge of the electrical

More information

Two-Port Networks Admittance Parameters CHAPTER16 THE LEARNING GOALS FOR THIS CHAPTER ARE THAT STUDENTS SHOULD BE ABLE TO:

Two-Port Networks Admittance Parameters CHAPTER16 THE LEARNING GOALS FOR THIS CHAPTER ARE THAT STUDENTS SHOULD BE ABLE TO: CHAPTER16 Two-Port Networks THE LEARNING GOALS FOR THIS CHAPTER ARE THAT STUDENTS SHOULD BE ABLE TO: Calculate the admittance, impedance, hybrid, and transmission parameter for two-port networks. Convert

More information

ENGG 225. David Ng. Winter January 9, Circuits, Currents, and Voltages... 5

ENGG 225. David Ng. Winter January 9, Circuits, Currents, and Voltages... 5 ENGG 225 David Ng Winter 2017 Contents 1 January 9, 2017 5 1.1 Circuits, Currents, and Voltages.................... 5 2 January 11, 2017 6 2.1 Ideal Basic Circuit Elements....................... 6 3 January

More information

Voltage Dividers, Nodal, and Mesh Analysis

Voltage Dividers, Nodal, and Mesh Analysis Engr228 Lab #2 Voltage Dividers, Nodal, and Mesh Analysis Name Partner(s) Grade /10 Introduction This lab exercise is designed to further your understanding of the use of the lab equipment and to verify

More information

EE 40: Introduction to Microelectronic Circuits Spring 2008: Midterm 2

EE 40: Introduction to Microelectronic Circuits Spring 2008: Midterm 2 EE 4: Introduction to Microelectronic Circuits Spring 8: Midterm Venkat Anantharam 3/9/8 Total Time Allotted : min Total Points:. This is a closed book exam. However, you are allowed to bring two pages

More information

ELEC4612 Power System Analysis Power Flow Analysis

ELEC4612 Power System Analysis Power Flow Analysis ELEC462 Power Sstem Analsis Power Flow Analsis Dr Jaashri Ravishankar jaashri.ravishankar@unsw.edu.au Busbars The meeting point of various components of a PS is called bus. The bus or busbar is a conductor

More information

arxiv: v2 [math-ph] 23 Jun 2014

arxiv: v2 [math-ph] 23 Jun 2014 Note on homological modeling of the electric circuits Eugen Paal and Märt Umbleja arxiv:1406.3905v2 [math-ph] 23 Jun 2014 Abstract Based on a simple example, it is explained how the homological analysis

More information

Basics of Network Theory (Part-I)

Basics of Network Theory (Part-I) Basics of Network Theory (PartI). A square waveform as shown in figure is applied across mh ideal inductor. The current through the inductor is a. wave of peak amplitude. V 0 0.5 t (m sec) [Gate 987: Marks]

More information

Chapter 10: Sinusoidal Steady-State Analysis

Chapter 10: Sinusoidal Steady-State Analysis Chapter 10: Sinusoidal Steady-State Analysis 1 Objectives : sinusoidal functions Impedance use phasors to determine the forced response of a circuit subjected to sinusoidal excitation Apply techniques

More information

Kirchhoff's Laws and Circuit Analysis (EC 2)

Kirchhoff's Laws and Circuit Analysis (EC 2) Kirchhoff's Laws and Circuit Analysis (EC ) Circuit analysis: solving for I and V at each element Linear circuits: involve resistors, capacitors, inductors Initial analysis uses only resistors Power sources,

More information

ECE 1311: Electric Circuits. Chapter 2: Basic laws

ECE 1311: Electric Circuits. Chapter 2: Basic laws ECE 1311: Electric Circuits Chapter 2: Basic laws Basic Law Overview Ideal sources series and parallel Ohm s law Definitions open circuits, short circuits, conductance, nodes, branches, loops Kirchhoff's

More information

ECE2262 Electric Circuits. Chapter 5: Circuit Theorems

ECE2262 Electric Circuits. Chapter 5: Circuit Theorems ECE2262 Electric Circuits Chapter 5: Circuit Theorems 1 Equivalence Linearity Superposition Thevenin s and Norton s Theorems Maximum Power Transfer Analysis of Circuits Using Circuit Theorems 2 5. 1 Equivalence

More information

Physics 116A Notes Fall 2004

Physics 116A Notes Fall 2004 Physics 116A Notes Fall 2004 David E. Pellett Draft v.0.9 Notes Copyright 2004 David E. Pellett unless stated otherwise. References: Text for course: Fundamentals of Electrical Engineering, second edition,

More information

Chapter 9 Balanced Faults, Part II. 9.4 Systematic Fault Analysis Using Bus Impedance Matrix

Chapter 9 Balanced Faults, Part II. 9.4 Systematic Fault Analysis Using Bus Impedance Matrix Chapter 9 Balanced Faults, Part II 9.4 Systematic Fault Analysis Using Bus Impedance Matrix In the previous analysis we employed the Thevenin model and ound the Thevenin voltage and impedance by means

More information

mywbut.com Mesh Analysis

mywbut.com Mesh Analysis Mesh Analysis 1 Objectives Meaning of circuit analysis; distinguish between the terms mesh and loop. To provide more general and powerful circuit analysis tool based on Kirchhoff s voltage law (KVL) only.

More information

Circuit Analysis. by John M. Santiago, Jr., PhD FOR. Professor of Electrical and Systems Engineering, Colonel (Ret) USAF. A Wiley Brand FOR-

Circuit Analysis. by John M. Santiago, Jr., PhD FOR. Professor of Electrical and Systems Engineering, Colonel (Ret) USAF. A Wiley Brand FOR- Circuit Analysis FOR A Wiley Brand by John M. Santiago, Jr., PhD Professor of Electrical and Systems Engineering, Colonel (Ret) USAF FOR- A Wiley Brand Table of Contents. ' : '" '! " ' ' '... ',. 1 Introduction

More information

Designing Information Devices and Systems I Spring 2018 Lecture Notes Note 11

Designing Information Devices and Systems I Spring 2018 Lecture Notes Note 11 EECS 16A Designing Information Devices and Systems I Spring 2018 Lecture Notes Note 11 11.1 Context Our ultimate goal is to design systems that solve people s problems. To do so, it s critical to understand

More information

2 Power System Network Matrices I

2 Power System Network Matrices I Power System Analysis Power System Network Matrices I. INRODUCION he various terms used in Graph heory are presented in this chapter. Formulation of different network matrices are discussed. Primitive

More information

Discussion Question 6A

Discussion Question 6A Discussion Question 6 P212, Week 6 Two Methods for Circuit nalysis Method 1: Progressive collapsing of circuit elements In last week s discussion, we learned how to analyse circuits involving batteries

More information

Consider Figure What is the horizontal axis grid increment?

Consider Figure What is the horizontal axis grid increment? Chapter Outline CHAPER 14 hree-phase Circuits and Power 14.1 What Is hree-phase? Why Is hree-phase Used? 14.2 hree-phase Circuits: Configurations, Conversions, Analysis 14.2.1 Delta Configuration Analysis

More information

Networks and Systems Prof. V. G. K. Murti Department of Electrical Engineering Indian Institute of Technology, Madras

Networks and Systems Prof. V. G. K. Murti Department of Electrical Engineering Indian Institute of Technology, Madras Networks and Systems Prof. V. G. K. Murti Department of Electrical Engineering Indian Institute of Technology, Madras Lecture - 34 Network Theorems (1) Superposition Theorem Substitution Theorem The next

More information

DOWNLOAD PDF AC CIRCUIT ANALYSIS PROBLEMS AND SOLUTIONS

DOWNLOAD PDF AC CIRCUIT ANALYSIS PROBLEMS AND SOLUTIONS Chapter 1 : Resistors in Circuits - Practice â The Physics Hypertextbook In AC circuit analysis, if the circuit has sources operating at different frequencies, Superposition theorem can be used to solve

More information

A~(A'~) = i,(t) (1.34)

A~(A'~) = i,(t) (1.34) GENERAL RESISTIVE CIRCUITS 225 Nonlinear branch equation In vector notation, Eq. (1.31) becomes simply Since the independent current sources do not form cut sets (by assumption), Eq. (1.14) remains valid.

More information

ECE2262 Electric Circuits

ECE2262 Electric Circuits ECE2262 Electric Circuits Equivalence Chapter 5: Circuit Theorems Linearity Superposition Thevenin s and Norton s Theorems Maximum Power Transfer Analysis of Circuits Using Circuit Theorems 1 5. 1 Equivalence

More information

Lecture 3 BRANCHES AND NODES

Lecture 3 BRANCHES AND NODES Lecture 3 Definitions: Circuits, Nodes, Branches Kirchoff s Voltage Law (KVL) Kirchoff s Current Law (KCL) Examples and generalizations RC Circuit Solution 1 Branch: BRANCHES AND NODES elements connected

More information

POLYTECHNIC UNIVERSITY Electrical Engineering Department. EE SOPHOMORE LABORATORY Experiment 2 DC circuits and network theorems

POLYTECHNIC UNIVERSITY Electrical Engineering Department. EE SOPHOMORE LABORATORY Experiment 2 DC circuits and network theorems POLYTECHNIC UNIVERSITY Electrical Engineering Department EE SOPHOMORE LABORATORY Experiment 2 DC circuits and network theorems Modified for Physics 18, Brooklyn College I. Overview of Experiment In this

More information

Chapter 5: Circuit Theorems

Chapter 5: Circuit Theorems Chapter 5: Circuit Theorems This chapter provides a new powerful technique of solving complicated circuits that are more conceptual in nature than node/mesh analysis. Conceptually, the method is fairly

More information

CHAPTER 4. Circuit Theorems

CHAPTER 4. Circuit Theorems CHAPTER 4 Circuit Theorems The growth in areas of application of electrical circuits has led to an evolution from simple to complex circuits. To handle such complexity, engineers over the years have developed

More information

AN APPLICATION OF LINEAR ALGEBRA TO NETWORKS

AN APPLICATION OF LINEAR ALGEBRA TO NETWORKS AN APPLICATION OF LINEAR ALGEBRA TO NETWORKS K. N. RAGHAVAN 1. Statement of the problem Imagine that between two nodes there is a network of electrical connections, as for example in the following picture

More information

Electric Circuit Theory

Electric Circuit Theory Electric Circuit Theory Nam Ki Min nkmin@korea.ac.kr 010-9419-2320 Chapter 11 Sinusoidal Steady-State Analysis Nam Ki Min nkmin@korea.ac.kr 010-9419-2320 Contents and Objectives 3 Chapter Contents 11.1

More information

Designing Information Devices and Systems II Spring 2016 Anant Sahai and Michel Maharbiz Midterm 2

Designing Information Devices and Systems II Spring 2016 Anant Sahai and Michel Maharbiz Midterm 2 EECS 16B Designing Information Devices and Systems II Spring 2016 Anant Sahai and Michel Maharbiz Midterm 2 Exam location: 145 Dwinelle (SIDs ending in 1 and 5) PRINT your student ID: PRINT AND SIGN your

More information

Consider the following generalized simple circuit

Consider the following generalized simple circuit ntroduction to Circuit Analysis Getting Started We analyze circuits for several reasons Understand how they work Learn how to design from other people s work Debug our own designs Troubleshoot circuit

More information

EE 230. Lecture 4. Background Materials

EE 230. Lecture 4. Background Materials EE 230 Lecture 4 Background Materials Transfer Functions Test Equipment in the Laboratory Quiz 3 If the input to a system is a sinusoid at KHz and if the output is given by the following expression, what

More information

Note on homological modeling of the electric circuits

Note on homological modeling of the electric circuits Journal of Physics: Conference Series OPEN ACCESS Note on homological modeling of the electric circuits To cite this article: E Paal and M Umbleja 2014 J. Phys.: Conf. Ser. 532 012022 Related content -

More information

Notes for course EE1.1 Circuit Analysis TOPIC 3 CIRCUIT ANALYSIS USING SUB-CIRCUITS

Notes for course EE1.1 Circuit Analysis TOPIC 3 CIRCUIT ANALYSIS USING SUB-CIRCUITS Notes for course EE1.1 Circuit Analysis 2004-05 TOPIC 3 CIRCUIT ANALYSIS USING SUB-CIRCUITS OBJECTIVES 1) To introduce the Source Transformation 2) To consider the concepts of Linearity and Superposition

More information

Fundamental of Electrical circuits

Fundamental of Electrical circuits Fundamental of Electrical circuits 1 Course Description: Electrical units and definitions: Voltage, current, power, energy, circuit elements: resistors, capacitors, inductors, independent and dependent

More information

UC DAVIS. Circuits I Course Outline

UC DAVIS. Circuits I Course Outline UC DAVIS Circuits I Course Outline ENG 17 Professor Spencer Fall 2010 2041 Kemper Hall Lecture: MWF 4:10-5:00, 1003 Giedt Hall 752-6885 Discussion Section 1: W 1:10-2:00, 55 Roessler CRN: 61417 Discussion

More information

MAE140 Linear Circuits Fall 2016 Final, December 6th Instructions

MAE140 Linear Circuits Fall 2016 Final, December 6th Instructions MAE40 Linear Circuits Fall 206 Final, December 6th Instructions. This exam is open book. You may use whatever written materials you choose, including your class notes and textbook. You may use a handheld

More information

BASIC NETWORK ANALYSIS

BASIC NETWORK ANALYSIS SECTION 1 BASIC NETWORK ANALYSIS A. Wayne Galli, Ph.D. Project Engineer Newport News Shipbuilding Series-Parallel dc Network Analysis......................... 1.1 Branch-Current Analysis of a dc Network......................

More information

Circuits with Capacitor and Inductor

Circuits with Capacitor and Inductor Circuits with Capacitor and Inductor We have discussed so far circuits only with resistors. While analyzing it, we came across with the set of algebraic equations. Hereafter we will analyze circuits with

More information

Circuit Theorems Overview Linearity Superposition Source Transformation Thévenin and Norton Equivalents Maximum Power Transfer

Circuit Theorems Overview Linearity Superposition Source Transformation Thévenin and Norton Equivalents Maximum Power Transfer Circuit Theorems Overview Linearity Superposition Source Transformation Thévenin and Norton Equivalents Maximum Power Transfer J. McNames Portland State University ECE 221 Circuit Theorems Ver. 1.36 1

More information

COOKBOOK KVL AND KCL A COMPLETE GUIDE

COOKBOOK KVL AND KCL A COMPLETE GUIDE 1250 COOKBOOK KVL AND KCL A COMPLETE GUIDE Example circuit: 1) Label all source and component values with a voltage drop measurement (+,- ) and a current flow measurement (arrow): By the passive sign convention,

More information

NETWORK MATRICES. voltages through the branch impedance matrix and branch admittance matrix: ELOOP = ZLOOP ILOOP ILOOP = YLOOP ELOOP (11)

NETWORK MATRICES. voltages through the branch impedance matrix and branch admittance matrix: ELOOP = ZLOOP ILOOP ILOOP = YLOOP ELOOP (11) NETWORK MATRICES 2. FORMATION OF Y BUS AND Z BUS The bus admittance matrix, YBUS plays a very important role in computer aided power system analysis. It can be formed in practice by either of the methods

More information

Delhi Noida Bhopal Hyderabad Jaipur Lucknow Indore Pune Bhubaneswar Kolkata Patna Web: Ph:

Delhi Noida Bhopal Hyderabad Jaipur Lucknow Indore Pune Bhubaneswar Kolkata Patna Web:     Ph: Serial : CH_EE_B_Network Theory_098 Delhi Noida Bhopal Hyderabad Jaipur Lucknow ndore Pune Bhubaneswar Kolkata Patna Web: E-mail: info@madeeasy.in Ph: 0-56 CLASS TEST 08-9 ELECTCAL ENGNEENG Subject : Network

More information

Networks and Systems Prof. V. G. K. Murti Department of Electrical Engineering Indian Institution of Technology, Madras

Networks and Systems Prof. V. G. K. Murti Department of Electrical Engineering Indian Institution of Technology, Madras Networks and Systems Prof. V. G. K. Murti Department of Electrical Engineering Indian Institution of Technology, Madras Lecture - 32 Network Function (3) 2-port networks: Symmetry Equivalent networks Examples

More information

ECE KIRCHHOFF'S LAWS - INVESTIGATION 8 KIRCHHOFF'S VOLTAGE LAW

ECE KIRCHHOFF'S LAWS - INVESTIGATION 8 KIRCHHOFF'S VOLTAGE LAW ECE 109 - KIRCHHOFF'S LAWS - IVESTIGATIO 8 KIRCHHOFF'S VOLTAGE LAW FALL 2006 A.P. FELZER To do "well" on this investigation you must not only get the right answers but must also do neat, complete and concise

More information

Chapter 1W Basic Electromagnetic Concepts

Chapter 1W Basic Electromagnetic Concepts Chapter 1W Basic Electromagnetic Concepts 1W Basic Electromagnetic Concepts 1W.1 Examples and Problems on Electric Circuits 1W.2 Examples on Magnetic Concepts This chapter includes additional examples

More information

Power System Analysis

Power System Analysis Power System Analysis BY A. P U R N A C H A N D E R A S S I S T A N T P R O F E S S O R D E P A R T M E N T O F E E E A C E E N G I N E E R I N G C O L L E G E Course Objectives: 1. To understand and develop

More information

Sinusoidal Steady- State Circuit Analysis

Sinusoidal Steady- State Circuit Analysis Sinusoidal Steady- State Circuit Analysis 9. INTRODUCTION This chapter will concentrate on the steady-state response of circuits driven by sinusoidal sources. The response will also be sinusoidal. For

More information

Notes on the Matrix-Tree theorem and Cayley s tree enumerator

Notes on the Matrix-Tree theorem and Cayley s tree enumerator Notes on the Matrix-Tree theorem and Cayley s tree enumerator 1 Cayley s tree enumerator Recall that the degree of a vertex in a tree (or in any graph) is the number of edges emanating from it We will

More information

Impedance and Admittance Parameters

Impedance and Admittance Parameters 1/31/011 mpedance and Admittance Parameters lecture 1/ mpedance and Admittance Parameters Say we wish to connect the put of one circuit to the input of another. #1 put port input port # The terms input

More information

The equivalent model of a certain op amp is shown in the figure given below, where R 1 = 2.8 MΩ, R 2 = 39 Ω, and A =

The equivalent model of a certain op amp is shown in the figure given below, where R 1 = 2.8 MΩ, R 2 = 39 Ω, and A = The equivalent model of a certain op amp is shown in the figure given below, where R 1 = 2.8 MΩ, R 2 = 39 Ω, and A = 10 10 4. Section Break Difficulty: Easy Learning Objective: Understand how real operational

More information

Chapter 2. Engr228 Circuit Analysis. Dr Curtis Nelson

Chapter 2. Engr228 Circuit Analysis. Dr Curtis Nelson Chapter 2 Engr228 Circuit Analysis Dr Curtis Nelson Chapter 2 Objectives Understand symbols and behavior of the following circuit elements: Independent voltage and current sources; Dependent voltage and

More information

Engineering Fundamentals and Problem Solving, 6e

Engineering Fundamentals and Problem Solving, 6e Engineering Fundamentals and Problem Solving, 6e Chapter 17 Electrical Circuits Chapter Objectives Compute the equivalent resistance of resistors in series and in parallel Apply Ohm s law to a resistive

More information

Enhanced Newton Method Based Radial Distribution System Load Flow Analysis with Extrapolation Techniques

Enhanced Newton Method Based Radial Distribution System Load Flow Analysis with Extrapolation Techniques Enhanced Newton Method Based Radial Distribution System Load Flow Analysis with Extrapolation Techniques Asst. Prof. Dr. Hassan Kuhba Electrical Engineering Department, Engineering College/Baghdad University,

More information

Solution: Based on the slope of q(t): 20 A for 0 t 1 s dt = 0 for 3 t 4 s. 20 A for 4 t 5 s 0 for t 5 s 20 C. t (s) 20 C. i (A) Fig. P1.

Solution: Based on the slope of q(t): 20 A for 0 t 1 s dt = 0 for 3 t 4 s. 20 A for 4 t 5 s 0 for t 5 s 20 C. t (s) 20 C. i (A) Fig. P1. Problem 1.24 The plot in Fig. P1.24 displays the cumulative charge q(t) that has entered a certain device up to time t. Sketch a plot of the corresponding current i(t). q 20 C 0 1 2 3 4 5 t (s) 20 C Figure

More information

AC Circuit Analysis and Measurement Lab Assignment 8

AC Circuit Analysis and Measurement Lab Assignment 8 Electric Circuit Lab Assignments elcirc_lab87.fm - 1 AC Circuit Analysis and Measurement Lab Assignment 8 Introduction When analyzing an electric circuit that contains reactive components, inductors and

More information

Chapter 9 Objectives

Chapter 9 Objectives Chapter 9 Engr8 Circuit Analysis Dr Curtis Nelson Chapter 9 Objectives Understand the concept of a phasor; Be able to transform a circuit with a sinusoidal source into the frequency domain using phasor

More information