Small Signal Zener Diodes

Transcription

1 Small Signal Zener Diodes BZX8-G-Series PRIMARY CHARACTERISTICS PARAMETER ALUE UNIT range nom.. to Test current T ; specification Pulse current Int. construction Single FEATURES Silicon planar Zener diodes The Zener voltages are graded according to the international E standard Standard Zener voltage tolerance is ± %; replace C with B for ± % tolerance AEC-Q qualified available (part number on request) ESD capability according to AEC-Q: Human body model > 8 k Machine model > 8 Base P/N-G - green, commercial grade Material categorization: for definitions of compliance please see ORDERING INFORMATION DEICE NAME ORDERING CODE TAPED UNITS PER REEL MINIMUM ORDER QUANTITY BZX8C-G-8 to BZX8C-G-8 (8 mm tape on " reel) /box BZX8B-G-8 to BZX8B-G-8 BZX8-G-series BZX8C-G-8 to BZX8C-G-8 (8 mm tape on " reel) /box BZX8B-G-8 to BZX8B-G-8 PACKAGE PACKAGE NAME WEIGHT MOLDING COMPOUND FLAMMABILITY RATING SOD- mg UL 9 - MOISTURE SENSITIITY LEEL MSL level (according J-STD-) SOLDERING CONDITIONS 6 C/ s at terminals ABSOLUTE MAXIMUM RATINGS (T amb = C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL ALUE UNIT Power dissipation Device on fiberglass substrate P tot mw Thermal resistance junction to ambient air alid that electrodes are kept at ambient temperature R thja 6 K/W Junction temperature C Storage temperature range T stg -6 to + C Operating temperature range T stg - to + C Rev..6, -Oct-6 Document Number: 8 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

2 BZX8-G-Series ELECTRICAL CHARACTERISTICS (T amb = C, unless otherwise specified) PART NUMBER MARKING CODE ZENER OLTAGE RANGE TEST CURRENT REERSE LEAKAGE CURRENT DYNAMIC RESISTANCE TEMPERATURE COEFFICIENT OF ZENER OLTAGE at T T T I R at R Z Z at T Z ZK at T Z at T μa - / C MIN. NOM. MAX. MAX. TYP. TYP. MIN. MAX. BZX8C-G Y...6 ( ) BZX8C-G Y...9 ( ) 6) BZX8C-G Y ( 9) ( 6) BZX8C-G Y... 8 ( 9) ( 6) BZX8C6-G Y ( 9) ( 6) BZX8C9-G Y ( 9) ( 6) - - BZX8C-G Y..6 8 ( 9) ( 6) BZX8C-G Y8.. ( 8) ( ) - BZX8C-G Y9.8.. ( 6) ( 8) - BZX8C6-G YA..6 6 ( ) 8 ( ) - 6 BZX8C6-G YB ( ) ( ) - BZX8C68-G YC ( ) ( 8) BZX8C-G YD..9 6 ( ) ( 8) BZX8C8-G YE ( ) ( 8) BZX8C9-G YF ( ) ( ) 8 BZX8C-G YG ( ) ( ) 8 BZX8C-G YH ( ) ( ) 9 BZX8C-G YI... 8 ( ) ( ) 6 9 BZX8C-G YK... 8 ( ) ( ) 9 BZX8C-G YL nom. ( ) ( ) 9 BZX8C6-G YM nom. ( ) ( ) 8 9. BZX8C8-G YN nom. ( ) ( ) 8 9. BZX8C-G YO nom. ( ) 6 ( ) 8 BZX8C-G YP.8... nom. ( ) 6 ( ) 8 BZX8C-G YR nom. ( ) 6 ( ) 8 BZX8C-G YS nom. ( 8) 6 ( ) 8 BZX8C-G YT 8... nom. ( 8) ( ) 8 BZX8C-G YU... nom. ( 8) ( ) 8 BZX8C6-G YW nom. ( 9) 8 ( ) BZX8C9-G YX 9... nom. ( ) 8 ( ) BZX8C-G YY 6... nom. ( ) 8 ( ) BZX8C-G YZ... nom. ( ) 8 ( ) BZX8C-G Z 8... nom. 6 ( 8) 8 ( ) 8 BZX8C6-G Z nom. ( ) ( ) BZX8C6-G Z nom. 8 ( ) ( ) BZX8C68-G Z nom. 9 ( ) ( ) BZX8C-G Z 9... nom. 9 ( ) ( ) Rev..6, -Oct-6 Document Number: 8 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

3 BZX8-G-Series ELECTRICAL CHARACTERISTICS (T amb = C, unless otherwise specified) PART NUMBER MARKING CODE ZENER OLTAGE RANGE TEST CURRENT REERSE LEAKAGE CURRENT DYNAMIC RESISTANCE TEMPERATURE COEFFICIENT OF ZENER OLTAGE at T T T I R at R Z Z at T Z ZK at T Z at T μa - / C MIN. NOM. MAX. MAX. TYP. TYP. MIN. MAX. BZX8B-G C... ( ) BZX8B-G C.6.. ( ) 6) BZX8B-G C ( 9) ( 6) BZX8B-G C... 8 ( 9) ( 6) BZX8B6-G C ( 9) ( 6) BZX8B9-G C ( 9) ( 6) - - BZX8B-G C ( 9) ( 6) BZX8B-G C ( 8) ( ) - BZX8B-G C9.. ( 6) ( 8) - BZX8B6-G CA.9.6. ( ) 8 ( ) - 6 BZX8B6-G CB ( ) ( ) - BZX8B68-G CC ( ) ( 8) BZX8B-G CD ( ) ( 8) BZX8B8-G CE ( ) ( 8) BZX8B9-G CF ( ) ( ) 8 BZX8B-G CG ( ) ( ) 8 BZX8B-G CH ( ) ( ) 9 BZX8B-G CI ( ) ( ) 6 9 BZX8B-G CK... 8 ( ) ( ) 9 BZX8B-G CL.... nom. ( ) ( ) 9 BZX8B6-G CM nom. ( ) ( ) 8 9. BZX8B8-G CN nom. ( ) ( ) 8 9. BZX8B-G CO nom. ( ) 6 ( ) 8 BZX8B-G CP.6... nom. ( ) 6 ( ) 8 BZX8B-G CR.... nom. ( ) 6 ( ) 8 BZX8B-G CS nom. ( 8) 6 ( ) 8 BZX8B-G CT nom. ( 8) ( ) 8 BZX8B-G CU..... nom. ( 8) ( ) 8 BZX8B6-G CW nom. ( 9) 8 ( ) 8 BZX8B9-G CX nom. ( ) 8 ( ) BZX8B-G CY nom. ( ) 8 ( ) BZX8B-G CZ nom. ( ) 8 ( ) BZX8B-G D... nom. 6 ( 8) 8 ( ) BZX8B6-G D nom. ( ) ( ) 9 BZX8B6-G D nom. 8 ( ) ( ) 9 BZX8B68-G D nom. 9 ( ) ( ) BZX8B-G D nom. 9 ( ) ( ) Rev..6, -Oct-6 Document Number: 8 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

4 BZX8-G-Series TYPICAL CHARACTERISTICS (T amb = C, unless otherwise specified) I F T J = C T J = C F r zj. 89 T J = C 8 6.8/8. 6. Fig. - Forward Characteristics Fig. - Dynamic Resistance vs. Zener Current mw = C P tot R zj C 89 T amb Fig. - Admissible Power Dissipation vs. Ambient Temperature. 8 Fig. - Dynamic Resistance vs. Zener Current r zj T J = C R zth 8 R zth = R tha x x negative positive at = Fig. - Dynamic Resistance vs. Zener Current Fig. 6 - Thermal Differential Resistance vs. Zener oltage Rev..6, -Oct-6 Document Number: 8 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

5 BZX8-G-Series R zj 8 = C = 9 8 Z at = = 6 8 C 89 Fig. - Dynamic Resistance vs. Zener oltage Fig. - Change of Zener oltage vs. Junction Temperature m/ C = m/ C 8 = 6-8 at =, I = Fig. 8 - Temperature Dependence of Zener oltage vs. Zener oltage at = Fig. - Temperature Dependence of Zener oltage vs. Zener oltage at = C Z = r zth x =. ; = at = Fig. 9 - Change of Zener oltage vs. Junction Temperature Fig. - Change of Zener oltage from Turn-on up to the Point of Thermal Equilibrium vs. Zener voltage Rev..6, -Oct-6 Document Number: 8 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

6 BZX8-G-Series = r zth x = C l z 8 9 = 6 =. Test Current at = Fig. - Change of Zener oltage from Turn-on up to the Point of Thermal Equilibrium vs. Zener voltage Fig. 6 - Breakdown Characteristics l Z = C Test current Fig. - Breakdown Characteristics = C l Z 8 Test current 6 8 Fig. - Breakdown Characteristics Rev..6, -Oct-6 6 Document Number: 8 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

7 BZX8-G-Series PACKAGE DIMENSIONS in millimeters (inches): SOD-. [.6]. [.] - 8 Cathode bar.9 [.].6 [.6]. [.6]. [.8]. [.].8 [.]. [.8]. [.6]. [.]. [.] max..8 [.]. [.98]. [.9]. [.] Footprint recommendation:.8 [.].8 [.] Document no.: S () Created - Date:.August. Rev. 6 - Date:.Sept.6.6 [.6].6 [.] Rev..6, -Oct-6 Document Number: 8 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT

8 Legal Disclaimer Notice ishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. ishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. ishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, ishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on ishay s knowledge of typical requirements that are often placed on ishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify ishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, ishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the ishay product could result in personal injury or death. Customers using or selling ishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized ishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of ishay. Product names and markings noted herein may be trademarks of their respective owners. ISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERED Revision: 8-Feb- Document Number: 9