承認書 SPECIFICATION FOR APPROVAL. Commodity: H3528AW32B3Z01. 産品型號 Model No. 客戶名稱 Customer Name. 客戶確認 Check By. 客戶核准並簽章 Authorized By

Transcription

1 承認書 SPECIFICATION FOR APPROVAL Commodity: Outline(L W H): 3.5mm 2.8mm 1.9mm Forward current: 2mA I F 30mA Typical viewing angle 50% Iv: 120 RoHS and REACH-compliant This is a preliminary specification intended for design purposes and subject to change without prior notice. Lens color: yellowish Good thermal dissipation & optical uniformity Qualified according to JEDC moisturevity Level 2a PLEASE PAY ATTENTION TO THE MOISTURE-ABSORBING PROBLEM,AND REFER TO THE OPERATING INSTRUCTIONS FOR THE DETAILS 産品型號 Model No 客戶名稱 Customer Name 客戶確認 Check By 客戶核准並簽章 Authorized By 客戶產品要求範圍 Application Range * 承認蓋章後請寄回承認書一份 Please return the book that stamp admitted a. 蘇州工業園區弘磊光電有限公司.SIP HONGBRIGHT OPTOELECTRONIC CO., LTD 地址 : 蘇州市吳中區興南路 18 號四季工業園 Address: NO.18Xingnan Road. Wuzhong District. Suzhou City. P. R. China. TEL: FAX: octek18@octekled.com Approved By: Checked By: Prepared By: 1 / 年 08 月 08 日

2 Table of Contents Product Code Method.03 Maximum Rating.03 Typical Product Characteristics Range of Bins...04 Color Coordinate Comparison.05 Electronic-optical Characteristics...06 Dimensions..07 Reflow Profile...08 Test Circuit and Handling Precautions 09 Packing Precautions..12 Test Items and Results of Reliability..13 Specification version update resume Update time Part number Remarks 2 / 年 08 月 08 日

3 Product Code Method H A - W32B Z The Company Initials 2 Lead Frame 3 Light Code H:Hongbright 3528(L W): 3.5mm 2.8mm A:Top light 4 Dice Wavelength &Luminous Rank W :White 5 Lap Polarity 6 Zener Code 7 Material Flow Code 3:Vehicle mount Z:Add Zener Material Flow Code Maximum Rating(Ta=25 ) Characteristics Symbol Rating Unit DC Forward Current I F 30 ma Pulse Forward Current*1 I FP 100 ma Reverse Voltage V R 5 V ESD (Classification acc. AEC Q101) ESD HBM Min 4.0 KV Operating Temperature Range T OP -40~+85 Storage Temperature Range T STG -40~+100 Soldering Temperature*2 T SD 260 Notes : *1:Duty 1/10, pulse width 0.1ms *2:The maximum of soldering time is 5 seconds in T SD There is no maximum or typical voltage parameter For other ambient, limited setting of current will be depended on de-rating curves 3 / 年 08 月 08 日

4 Typical Product Characteristics Characteristics Symbol Value Min. Typ. Max. Unit Test condition Forward Voltage V F V IF=10mA Luminous Intensity Iv mcd IF=10mA Color Coordinate X Y IF=10mA Reverse Current IR 10 A VR=5V View Angle 2θ1/2 120 deg IF=10mA Notes: Measurement Errors:Forward Voltage: ±0.1V,Luminous Intensity: ±15%mcd,Color Coordinate: ±0.006 Electrical-Optical Characteristics (Ta=25 C) Range of Bins 1). Forward Voltage Bins (IF=10mA) 2). Intensity Bins (IF=10mA) VF(V) Bin code Min Max c b a A B IV(mcd) Bin code Min Max C D E F G / 年 08 月 08 日

5 Color Coordinate Comparison Bins Code Bins Code ST4 ST3 ST2 HU4 HU3 HU2 HV4 HV3 HV2 RANK X Y X Y X Y X Y X Y X Y X Y X Y X Y / 年 08 月 08 日

6 Electronic-optical Characteristics 1). Relative Spectral Distribution 2). Relative Luminous Intensity.Ambient Temperature Relative Radiant Power (%) Wavelength(nm) Relative Luminous Intensity (%) Ambient Temperature Ta( ) 3). Relative Luminous Intensity.Current 4). Typical Spatial Distribution Relative Luminous Intensity (%) Forward Current(mA) Relative Luminous Intensity (%) Genealogies angle 5). Electrical Characteristics 6). Thermal Design Forward Current IF (ma) Maximum Current (ma) Forward Voltage VF(V) Ambient Temperature Ta( ) 7). Forward Voltage Temperature 8).Light effect VS Current Forward Voltage (%) Light effect (%) Ambient Temperature Ta( ) Forward Current(mA) 6 / 年 08 月 08 日

7 Dimensions RECOMMEND PADLAYOUT All dimensions are in millimeters Tolerance is ±0.25(.010) mm unless otherwise noted. 7 / 年 08 月 08 日

8 Reflow Profile Notes: We recommend the reflow temperature 240 (±5 ).the maximum soldering temperature should be limited to 260 Don t cause stress to the silicone resin while it is exposed to high temperature; Number of reflow process shall be less than 3 times. 8 / 年 08 月 08 日

9 Test Circuit and Handling Precautions Test circuit Handling precautions 1. Over-current-proof Customer must apply resistors for protection; otherwise slight voltage shift will cause big current change (Burn out will happen). 2.Storage 2.1 It is recommended to store the products in the following conditions: Humidity: 60% R.H. Max. Temperature : 5 ~30 (41 ~86 ) 2.2 Shelf life in sealed bag: 3month at <5 ~30 and <30% R.H..After the package is opened, they should be keeping to stored at 60 R.H. in sealed antistatic bags, with reference to the IPC/JEDEC J - STD rules of moisture sensitivity levels. 3.Baking It is suggested to bake before soldering when beyond the standard storage time. The Conditions of baking are as followings: ±3 x(48hrs) and <5%RH, taped reel type ±3 x(3hrs), bulk type 9 / 年 08 月 08 日

10 Packing Feeding Direction (Unit: mm) Dimensions of Reel (Unit: mm) Dimensions of Tape (Unit: mm) Arrangement of Tap NOTES Empty component pockets are sealed with top cover tape The max loss number of SMD is 2pcs The cathode is oriented towards the tape sprocket hole in accordance with ANSI/EIA RS-481 specifications 2,000pcs per reel 10 / 年 08 月 08 日

11 Packing Packaging Specifications Notes: Reeled product (max.2,000) is packed in a sealed moisture-proof bag. Seven bags are packed in an inner box (size: about 238 X 194 X 102 mm) and four inner boxes are in an outer box (size: about 410 X 254 X 229mm). On the label of moisture-poof bag, there should be the information of Part No., Lot No. and quantity number; also the total quantity number should be on inspection request form on outer box. 11 / 年 08 月 08 日

12 Precautions Abnormal situation caused by improper setting of collet To choose the right collet is the key issue in improving the product s quality. LED is different from other electronic components, which is not only about electrical output but also for optical output. This characteristic made LED more fragile in the process of SMT. If the collet s lowering down height is not well set, it will bring damage to the gold wire at the time of collet s picking up and loading which will cause the LED fail to light up, light up now and then or other quality problems How to choose the collet During SMT, please choose the collet that has larger outer diameter than the lighting area of lens, in case that improper position of collet will damage the gold wire inside the LED. Different collets fit for different products, please refer to the following pictures cross out Outer diameter of collet should be larger than the lighting area Other points for attention A. No pressure should be exerted to the epoxy shell of the SMD under high temperature. B. Do not scratch or wipe the lens since the lens and gold wire inside are rather fragile and cross out easy to break. C. LED should be used as soon as possible when being taken out of the original package, and should be stored in anti-moisture and anti-esd package. This usage and handling instruction is only for your reference 12 / 年 08 月 08 日

13 Test Items and Results of Reliability Type Test Item Test Conditions Duration/Cycle Temperature Cycle Thermal Shock min 30 min min min 5sec 80 15min Number of Damaged 100 cycle 0/ cycle 0/22 Environmental Sequence High Humidity Heat Cycle %RH 24hrs/1cycle 10 cycle 0/22 High Temperature Storage T a = hrs 0/22 Humidity Heat Storage T a =60 RH=90% 1000 hrs 0/22 Low Temperature Storage T a = hrs 0/22 Life Test T a =25 I F =20mA 1000 hrs 0/22 Operation Sequence High Temperature Life Test Low Temperature Life Test T a =60 I F =10mA T a =-20 I F =20mA 500 hrs 0/ hrs 0/22 *Criteria for Judging Item Symbol Condition Criteria for Judgment of Pass Min Max Forward Voltage V F I F =20mA ~ USL* Reverse Current I R V R = 5V ~ 10μA Luminous Intensity Iv I F =20mA LSL *2 0.7 ~ Note: USL* 1 : Upper Specification Level LSL* 2 : Lower Specification Level 13 / 年 08 月 08 日