PG-200/PG-208 PRESSURE GAUGES P G G P P
|
|
- Deirdre Simpson
- 5 years ago
- Views:
Transcription
1 Digital 3 1/2 digits monitor Set button for switch output HI or LO (PG-200) (PG-208) Digital 3 1/2 digits Power switch LO setting VR for switch output LO HI setting VR for switch output HI SPAN adjustment VR Zero adjustment VR FEATURES Excellent stability A semiconductor chip is used as pressure a sensing element. State of the art circuit technology guarantees excellent temperature compensation. Low power consumption Approx hours (one year) continuous operation by 3.6 V lithium battery is expected due to the adoption time sharing operation method. Easy reading with a large LD display With pressure switches function Two independent pressure setting points of HI and LO With analog output (0 ~ 1 V) Meets DIN sizes W H D 40 mm PG-200 is for non-corrosive. PG-208 is corrosion resistant due to the use of stainless steel diaphragm. MODEL NUMER DESIGNATION Series name PG-200, PG-208 Rated pressure range Please refer to the LIST OF MODEL NUMERS when placing orders. P G G P P 101:0 ~ 9.81 {0 ~ 0.1 kgf/cm 2 } 0 ~ 10 (When displayed in the unit of Pa) 102:0 ~ 98.1 {0 ~ 1 kgf/cm 2 } 0 ~ 100 (When displayed in the unit of Pa) 103:0 ~ 981 {0 ~ 10 kgf/cm 2 } 0 ~ 1 MPa(When displayed in the unit of Pa) Pressure reference G:Gauge VH:Gauge (Vacuum) AH:Absolute GP:Gauge Pa unit display GMP:Gauge (103 type only) Pa unit display VP:Gauge (Vacuum) Pa unit display AP:Absolute Pa unit display Installation P: Except for PG-208 S: Power lank: 3: (Analog output is available)
2 LIST OF MODEL NUMERS Pa version Pressure reference Gauge Absolute Rated pressure range 0 ~ 10 0 ~ ~ ~ ~ 100 abs abs PG GP-P PG GP-P PG GP-P PG VP-P PG AP-P PG GP-3-P PG GP-3-P PG GP-3-P PG VP-3-P PG AP-3-P PG GP-S PG GP-S PG GP-S PG VP-S PG AP-S For corrosive or liquids PG GP-3-S PG GP-3-S PG GP-3-S PG VP-3-S PG AP-3-S PG GP-S PG GP-S PG VP-S PG GP-3-S PG GP-3-S PG VP-3-S MPa PG GMP-P PG GMP-3-P PG GMP-S For corrosive or liquids PG GMP-3-S PG GMP-S PG GMP-3-S Non SI unit version Pressure reference {kgf/cm 2 } Rated pressure range Gauge Absolute 0 ~ ~ ~ ~ ~ 98.1 abs {0 ~ 1000 mmh2o} {0 ~ 1} {0 ~ 10} {0 ~ mmhg} {0 ~ 735 mmhg abs} mmh2o kgf/cm 2 mmhg A PG G-P A PG G-P A PG G-P A PG VH-P A PG AH-P A PG G-3-P A PG G-3-P A PG G-3-P A PG VH-3-P A PG AH-3-P A PG G-S A PG G-S A PG G-S A PG VH-S A PG AH-S For corrosive or liquids A PG G-3-S A PG G-3-S A PG G-3-S A PG VH-3-S A PG AH-3-S A PG G-S A PG G-S A PG VH-S A PG G-3-S A PG G-3-S A PG VH-3-S : Not available Verify the above model numbers when placing orders. The products marked A are manufactured upon receipt of order basis. <Option> D3.6 V lithium battery Order item: Lithium battery The battery is an expendable item. The first one is provided with the unit. ( )
3 STANDARD SPEIFIATIONS Pa version Unless otherwise specified, the specs are defined at an ambient temperature of 25 ± 5, excitation voltage of 12 V D and battery of 3.6 V D. Item PG-200 PG-208 Pressure reference Model number Rated pressure range Maximum pressure reak-dawn pressure 101GP 102GP Gauge Absolute Gauge 103GP 103GMP 102VP 102AP 102GP 103GP 103GMP 102VP abs abs abs Operating temp., range 0 ~ 50 General specifications ompensated temp. range Operating humidity Storage temp. Gravitational effect (From vertical position to horizontal position) %RH % F.S. Non-corrosive 0 ~ ~ 85(No condensation) 20 ~ 70(Atmospheric pressure, humidity 65 %RH maximum) 1 orrosive /liquids compatible with SUS316 and SUS316L Approx. 0.5 Approx Approx. 0.5 Pressure port M 5 R 1/4(PT 1/4) G 3/8(PF 3/8) Net weight g Approx. 130 Approx. 330 Approx. 390 Power type Lithium battery D 3.6 V (ER6VM) life 9000 h minimum (Selectable by electrical terminals only in case of stand type) onsumption current : 20 ma maximum No. of digits 3 1/2 Display element LD Display Rated display range Display cycle Display accuracy maximum 0.00 ~ ~ (MPa) Approx. 3 times/s ± 0.5 %F.S. ± 2 counts (at 25 ± 5 ) ~ (MPa) Thermal error ZERO SPAN maximum ± 0.1 % F.S./ ± 2 counts ± 0.05 % F.S./ ± 2 counts ± 0.1 % F.S./ ± 2 counts ± 0.05 % Reading/ ± 2 counts Resolution 1 count 1 : will be limited to the ones compatible with Fluoro rubber when an O-ring supplied as an accessary is used and also compatible with the material of the joints.
4 STANDARD SPEIFIATIONS Pa version Unless otherwise specified, the specs are defined at an ambient temperature of 25 ± 5, excitation voltage of 12 V D and battery of 3.6 V D. Item PG-200 PG-208 Model number No. of setting points Switching capacity Residual voltage Output conditions 101GP 102GP 103GP 103GMP 102VP 102AP 102GP 103GP 103GMP 2 points of HI and LO (one point of HI only for the external power supply version) 30 V D 40 ma(npn open collector) 1.2 V D(When current inflow is 40 ma) 102VP Measured press LO set press. LO output ON, Measured press. HI set press. HI output ON. Switch Setting method When the SET button is pressed, HI set pressure is displayed for about 20 seconds first, then LO set pressure is displayed for about 20 seconds. Therefore, high and low pressure settings can be made by VR watching the display. Pressure setting range 0.00 ~ ~ (MPa) ~ (MPa) Switch state indication Indicated by an LD display (HI or LO) when the switch output is ON. Response Approx. 100 ms Switching hysteresis 2 Analog voltage output Additional function 4 counts 以下 4 counts maximum Voltage output: 0 ~ 1 V, Accuracy: ± 1 %F.S. (at 25 ± 5 ), Load: 1 kω minimum Low battery indication (LO AT) Accessories (for panel type only) Attachements : Half union (for a tube of φ 6 0.D.), and arb fitting (for a tube of φ 4 I.D.), one piece each. ( only) 2 : Available only for external power type.
5 STANDARD SPEIFIATIONS Non SI unit version Unless otherwise specified, the specs are defined at an ambient temperature of 25 ± 5, excitation voltage of 12 V D and battery of 3.6 V D. Item PG-200 PG-208 Pressure reference Model number Rated pressure range {kgf/cm 2 } Maximum pressure {kgf/cm 2 } reak-dawn pressure {kgf/cm 2 } Operating temp., range Gauge Absolute Gauge 101G 102G 103G 102VH 102AH 102G 103G 102VH abs {1000 mmh2o} {1} {10} { 735 mmhg} {735 mmhg abs} {1} {10} { 735 mmhg} abs {2000 mmh2o} {2} {15} {1471 mmhg} {1471 mmhg abs} {2} {20} {1471 mmhg} abs {5000 mmh2o} {5} {20} {3678 mmhg} {3678 mmhg abs} {3} {30} {2206 mmhg} 0 ~ 50 General specifications ompensated temp. range Operating humidity Storage temp. Gravitational effect (From vertical position to horizontal position) %RH % F.S. Non-corrosive 0 ~ ~ 85(No condensation) 20 ~ 70(Atmospheric pressure, humidity 65 %RH maximum) 1 orrosive /liquids compatible with SUS316 and SUS316L Approx. 0.5 Approx Approx. 0.5 Pressure port M 5 R 1/4(PT 1/4) G 3/8(PF 3/8) Net weight g Approx. 130 Approx. 330 Approx. 390 Power type Lithium battery D 3.6 V (ER6VM) life 9000 h minimum (Selectable by electrical treminals only in case of stand type) onsumption current : 20 ma maximum No. of digits 3 1/2 Display element LD Rated display range mmh2o.000 ~ ~ ~ 735 kgf/cm 2 kgf/cm 2 2 mmhg 000 ~ mmhg.000 ~ ~ ~ 735 kgf/cm 2 kgf/cm 2 2 mmhg Display Display cycle Display accuracy maximum Approx. 3 times/s ± 0.5 %F.S. ± 2 counts (at 25 ± 5 ) Thermal error ZERO SPAN maximum ± 0.1 % F.S./ ± 2 counts ± 0.05 % F.S./ ± 2 counts ± 0.1 % F.S./ ± 2 counts ± 0.05 % Reading/ ± 2 counts Resolution 1 count 1 : will be limited to the ones compatible with Fluoro rubber when an O-ring supplied as an accessary is used and also compatible with the material of the joints. 2 : Measurement can be made up to mmhg for 102VH and up to 760 mmhg for 102AH (Accuracy not guaranteed beyond the rated pressure.).
6 STANDARD SPEIFIATIONS Non SI unit version Unless otherwise specified, the specs are defined at an ambient temperature of 25 ± 5, excitation voltage of 12 V D and battery of 3.6 V D. Item PG-200 PG-208 Model number No. of setting points Switching capacity Residual voltage Output conditions 101G 102G 103G 102VH 102AH 102G 103G 102VH 2 points of HI and LO (one point of HI only for the external power supply version) 30 V D 40 ma(npn open collector) 1.2 V D(When current inflow is 40 ma) Measured press LO set press. LO output ON, Measured press. HI set press. HI output ON. Switch Setting method When the SET button is pressed, HI set pressure is displayed for about 20 seconds first, then LO set pressure is displayed for about 20 seconds. Therefore, high and low pressure settings can be made by VR watching the display. Pressure setting range Switch state indication Response 000 ~ ~ ~ ~ ~ ~ Indicated by an LD display (HI or LO) when the switch output is ON. Approx. 100 ms 000 ~ Switching hysteresis 4 Analog voltage output Additional function 4 counts maximum Voltage output: 0 ~ 1 V, Accuracy: ± 1 %F.S. (at 25 ± 5 ), Load: 1 kω minimum Low battery indication (LO AT) Accessories (for panel type only) Attachements : Half union (for a tube of φ 6 0.D.), and arb fitting (for a tube of φ 4 I.D.), one piece each. ( only) 3 : Pressure setting can be made up to 760 mmhg for 102VH and up to 760 mmhg for 102AH (Accuracy not guaranteed beyond the rated pressure.). 4 : Available only for external power type. ENVIRONMENTAL HARATERISTIS Test item Test conditions Permissible change Vibration Shock Pressure cycling Moisture resistance Amplitude 1.5 mm P-P, 10 ~ 55 Hz, 3 directions for 2 hours each (packed) 98.1 m/s 2, 3 directions for 3 times each (packed) 10 6 cycles 0 ~ Rated pressure 40, 90 ~ 95 %RH, 240 hrs. Pressure indication, switch setting and analog output (zero and span) variation: ± 1 %F.S. maximum each. (Note: No analog output for the battery type.)
7 M OUTLINE DIMENSIONS Unless otherwise specified, tolerance : ± 0.5 (Unit: mm) PG-200 (40) ATT LH PRESSURE GAUGE OPAL ELETRONIS 19 M 5 depth 5 Pressure port 15 Panel cut dimension Panel cut (1~2.5 mm) Panel board thickness <PG-200 > Electrical connection type Voltage output PG Electrical terminals are located inside. ATT LH PRESSURE GAUGE OPAL ELETRONIS YL X YH ORD ONNETION5~ V10 O10 ~ V ± R 1/4 (PT 1/4) 13.5 ± 1 Use connecting wires AWG Pressure port 26 or thinner one. M 5 depth 6 19 M 5 Electrical connection D E F type Grommet φ 7 Voltage output D5 ~ 10 V D10 ~ 24 V should be connected to proper terminals depending on the voltage.
8 ~ ~ OUTLINE DIMENSIONS Unless otherwise specified, tolerance : ± 0.5 (Unit: mm) PG-208 For corrosive or liquids Electrical terminals are located inside. ATT ORD ONNETION 311 PRESSURE GAUGE OPAL ELETRONIS Pressure port SUS 316 YL X YH 5 10 V O M V Diaphragm (SUS 316L) G 3/8 (PF 3/8) 28.5 SUS Use connecting wires AWG 26 or thinner one. O ring (Fluoro rubber) (P 18) 27 Electrical connection D E F type Voltage output Grommet φ 7 D5 ~ 10 V D10 ~ 24 V should be connected to proper terminals depending on voltage. Extra care should be taken with the diaphragm part. Do not touch the diaphragm directly to avoid damaging the diaphragm. INSIDE OF A PANEL Digital 3 1/2 digits Low battery indication ATT Polarity L H SW output indication POWER SET LO HI SPAN ZERP ON Decimal point Power SW Set SW LO setting VR HI setting VR ZERO adjustment VR SPAN adjustment VR INTERNAL ELETRIAL SHEMATIS type type Power supply circuit Pressure Sensor Main circuit Pressure Sensor Main circuit Voltage output LD LD Pressure indication Pressure indication No as to.
PG-100 HANDY MANOMETER COPAL ELECTRONICS FEATURES MODEL NUMBER DESIGNATION P G G P. marking Compatible with EMC directive
HANDY MANOMETER Power button Hold button marking Compatible with EMC directive Digital 3 1/2 digits Zero adjustment VR FEATURES Excellent stability State of the art sensor and circuit technology guarantees
More informationFitting PS P - B - R2
INTERNAL STRUCTURE PS86 (G 3/8) 2 3 FEATURES Solidstate pressure switch with no mechanical moving parts Isolated output via a photo-coupler Switching pressure adjustable and hysteresis band adjustable
More informationPressure. 1 Fitting PA R - N R2
INTERNAL STRUCTURE (R 1/4) 4 1 2 3 FEATURES High corrosion resistance and drip-proof construction port attachment made of Proven IP-65 grade gauge body (IP-65 in accordance with IEC) Standard product provides
More informationE8EB-N0C2B E8EB-N0B2B
Slim Sensor CSM DS_E 1 Ideal for Workpiece Position and Original Checking The to 1 kpa model can be used for workpiece position checking. The to 1MPa model is ideal for original pressure checking. Degree
More informationPTF30 Series. Features. Ordering information. G 6 N N F8 (0 to 5 kgf/cm 2 ) PTF30
eries Features Best pressure transmission solution for small and middle sized project such as indoor heating and air conditioning, water and sewer, or incinerator, etc. Improves noise resistance and minimize
More informationPressure transmitters for industrial applications MBS 32 and MBS 33
Data sheet Pressure transmitters for industrial applications MBS 32 and MBS 33 The standard pressure transmitters MBS 32 and MBS 33 are designed for use in almost all industrial applications, and offer
More informationDS 300. Electronic Pressure Switch. with IO-Link interface. Stainless Steel Sensor. accuracy according to IEC 60770: 0.35 % FSO.
DS 00 Electronic Pressure Switch with IO-Link interface Stainless Steel Sensor accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 00 mbar up to 0... 600 bar Digital output signal IO-Link
More informationDigital display Pressure range ON/OFF output Linear output Model No Positive pressure 0 to 98 kpa (0 to 1 kgf/cm 2 ) NPN open collector o 1 to o5
Pressure Sensor E8CC with Built-in Microcomputer and Digital Display and New E8CB General-purpose Model Withstands a of 490 kpa (5 kgf/cm 2 ) and highly reliable. Incorporates a two-turn adjuster ensuring
More informationBase S C T B
OPAL ELETRONIS ROTARY ODED SWITHES S-00/2000 RoHS compatible INTERNAL STRUTURE S-00 / 2000 series 4 2 3 6 FEATURES Lead-free soldering Fine click with metallic spring Low profile of 3.9 mm makes perfect
More informationED 701 General Industry Pressure Transmitter
ED 701 General Industry Pressure Transmitter Standard industrial process connections Complete range of electrical connections 4... 20 ma and Voltage outputs Accuracy: 0.1%, 0.2% and 0.4% FS Quick response
More informationProximity Sensor Ideal for High Temperatures and Cleaning Processes. Applicable to 120 C
ASH & ALAIN INDIA PVT LTD S-00, F.I.E.E., Okhla Industrial Area, Phase-ii, New Delhi-000(India) Tel : 0-797575 Fax : 0-79757 E-mail : sales@ashalain.com Proximity Ideal for High Temperatures and Cleaning
More informationSafety Precautions WARNING If critical situations that could lead to user s death or serious injury is assumed by mishandling of the product.
Safety Precautions Observe the following notices to ensure personal safety or to prevent accidents. To ensure that you use this product correctly, read this User s Manual thoroughly before use. Make sure
More informationElectromagnetic Flowmeter
Overview Flokal B.V. smart electromagnetic flow meter is hallmarked by its high performance and reliability that are based on successful, field-proven technology. It s being widely used in industries such
More informationDMP 331. Industrial Pressure Transmitter for Low Pressure. Stainless Steel Sensor
DMP Industrial Pressure Transmitter for Low Pressure Stainless Steel Sensor accuracy according to IEC 60770: : 0.5 % FSO option: 0.5 / 0. % FSO Nominal pressure from 0... 00 mbar up to 0... 60 bar Output
More informationApplicable Fluid. Accuracy. Flow Rate Range. Fluid Temperature. Fluid Viscosity. Connection Size. Flange Rating. Housing. Material. Blade.
TOKICO TURINE METER GS-F211E- Overview Turbine meter has an excellent performance with its distinctive structure. Comparing with the flow meter using other method, it has compact and lighter design and
More informationSPECIFICATION. Messrs. DATE 20 June, 2013 No. V AP4, AG4 Pressure Sensor
DATE 20 June, 2013 No. Messrs. SPECIFICATION Model: AP4, AG4 Pressure Sensor Project: Distributor: Preliminary Edition rev. 1.00 This document has a possibility to be revised without notice. Reference:
More informationCS-32 ROTARY SELECTOR SWITCHES (SMD) C S Z E T A FEATURES PART NUMBER DESIGNATION
ROTARY SELETOR SWITHES (SMD) S-3 RoHS compliant INTERNAL STRUTURE Part name Material Flammability FEATURES Wiper over Housing Terminal pin Base element Multi metal alloy Stainless steel (SUS 34) Epoxy
More informationST-32 SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) S T E T A ( 1 2 ) FEATURES PART NUMBER DESIGNATION
SURFACE MOUNT CERMET TRIMMERS (SINGLE TURN) ST- RoHS compliant INTERNAL STRUCTURE 7 6 5 4 9 8 FEATURES 4 5 6 7 8 9 Part name Wiper Cover Housing Terminal pin Base element O ring Rotor Electrode Resistive
More informationProsperity Dielectrics Co., Ltd. 1 ACS-1045 Rev15
1. DESCRIPTION MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. WTC high
More informationOperating Instructions for Digital Manometer. Model: MAN-SD
Operating Instructions for Digital Manometer Model: MAN-SD 1. Contents 1. Contents...2 2. Note...3 3. Instrument Inspection...3 4. Regulation Use...4 5. Operating Principle...4 6. Mechanical Connection...5
More informationCALYS 80P. Field pressure calibrator with high accuracy 0.01%
Field pressure calibrator with high accuracy 0.01% CALYS 80P is a field pressure calibrator within CALYS range with high accuracy of 0.01%. Description CALYS 80P is a field pressure calibrator within CALYS
More informationDS 200P. Electronic Pressure Switch. Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm
Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm accuracy according to IEC 600: standard: 0. % FSO option: 0. % FSO Nominal pressure from 0... 00 mbar up to 0... 0 bar
More informationC V S T B T 1 0 ( )
SLIDE SINGLE SWITCHES TURN WIREWOUND ( mm TRIMMERS PITCH) -6/- -T 6 FEATURES Lowest profile design of. mm Fine pitch of mm Easy motion with knob height of 0. mm 6 Part Part name name Material Material
More informationOPERATION MANUAL. Acceleration, Velocity RMS measurement, Metric & Imperial unit PEN VIBRATION METER Model : PVB-820
Acceleration, Velocity RMS measurement, Metric & Imperial unit PEN VIBRATION METER Model : PVB-820 Your purchase of this PEN VIBRATION METER marks a step forward for you into the field of precision measurement.
More informationSMD Switch SI-C3436A General specification. Soldering conditions Reflow Soldering condition. Standard Reel Dimensions (mm) Packing specification
SMD Switch SI - C3436A - 7017 Features External Dimensions : 3.4mm x 3.6mm, Height 0.70mm Suitable for thinner and lighter portable devices Suitable for water proof devices Reflow soldering Package With
More informationDMP 331Pi. Precision Pressure Transmitter. pressure ports and process connections with flush welded stainless steel diaphragm
DMP Pi Precision Pressure Transmitter pressure ports and process connections with flush welded stainless steel diaphragm accuracy according to IEC 600: 0, % FSO Nominal pressure from 0... 00 mbar up to
More informationDMP 331P. Industrial Pressure Transmitter. Process Connections With Flush Welded Stainless Steel Diaphragm
DMP P Industrial Pressure Transmitter Process Connections With Flush Welded Stainless Steel accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO Nominal pressure from 0... 00 mbar up
More informationDMP 331Pi. Precision Pressure Transmitter. pressure ports and process connections with flush welded stainless steel diaphragm
DMP Pi Precision Pressure Transmitter pressure ports and process connections with flush welded stainless steel diaphragm accuracy according to IEC 600: 0, % FSO Nominal pressure from 0... 00 mbar up to
More informationLow Differential Pressure Gage
Low Differential Pressure Gage NEW Manostar Gage Panel installation compact type Low Differential Pressure Gage RoHS compliant Utility model registration No.2027772 Compact and lightweight type Even when
More informationCALYS 120 IS. ATEX documenting multifunction calibrator with high accuracy 0.006%
ATEX documenting multifunction calibrator with high accuracy 0.006% is the top instrument of our range of ATEX documenting multifunction calibrators. Description is the top instrument of our range of ATEX
More informationCS Series. Capacitance Type. Type. Proximity Sensor. Features
INFORMATI Series Features Capacitance Type - Metal cylinder/resin cylinder/square type - Non-metal objects such as wood, paper, plastic and water can be detected. - The operating distance is adjustable
More informationConfigurations: Dimension (mm) A (max) Item IRS IRS
Configurations: FEATURES Magnetically shielded construction. Compact and thin. Put the electrode with ferrite core directly, a small surface area allow a high mounting. Shielding Drum Choke for good in
More informationPressure Transmitter ED 701
Pressure Transmitter ED 701 Hygienic and industrial process connections Zero setting function Accuracy < 0.1% FS Quick response time < 25 ms High long-term stability Excellent repeatability Active compensation
More informationall stainless steel transducer multimedia compatibility
all stainless steel transducer multimedia compatibility High-Performance Silicon technology LARGE INVENTORY Fast Shipment! 0-0.07 to 0-690 bar 100 mv, 0 to 5 V, and 4 to 20 ma Outputs U 1, 2 & 5 psi Low
More informationFreescale Semiconductor
Freescale Semiconductor Pressure Rev 14, 10/2008 + 10 kpa Uncompensated Silicon Pressure The series silicon piezoresistive pressure sensors provide a very accurate and linear voltage output, directly proportional
More informationSmartec Pressure Sensor (bridge output)
DATASHEET Pressure sensor family 1/5 Smartec Pressure Sensor (bridge output) Features * Commercial grade * DIP version for high volume production * Gauge or absolute pressure * Resistive bridge technology
More informationPascal ET is an handheld multifunction calibrator for the measurement and simulation of the following parameters: - pressure
DATASHEET Pascal ET Pascal ET is an handheld multifunction calibrator for the measurement and simulation of the following parameters: - pressure - electrical signals (ma, mv, V, ) - temperature (TC and
More informationTel: Fax: PRODUCT INFORMATION
PRODUCT INFORMATION Part Numbers CEM-OB6027E-354G-PAHC01-00-0 Revision 1-2016 Type Compliance Condenser Microphone RoHS, Lead Free ISO 9001:2000 REACH: SUBSTANCE OF VERY HIGH CONCERN (SVHC) This product
More informationSD-1000/2000 ROTARY CODED SWITCHES S D T B FEATURES PART NUMBER DESIGNATION. Please refer to the LIST OF PART NUMBERS when placing orders.
SD-00/2000 RoHS compliant INTERNAL STRUCTURE SD-00 / 2000 series Part name Material Flammability FEATURES Housing Polyphenylenesulphide UL9V-0 Metallic spring O ring Insert rotor Base Stainless (SUS 30)
More informationType Plunger Height x pitch Operating force (OF) Without ground terminal Flat type 4.3 x 6.5 mm General 0.98 N (100 gf) B3F-6000 B3F-6100
Mechanical Key Switch (Ral) B3F- Taped Ral Switches Automatic mounting possible via general- ral taped component inserters. Conform to EIAJ RC 1008A Electronic Component Taping Dimensions. The same snap-action
More informationPURCHASE OF LAB EQUIPMENTS FOR CHEMISTRY [Kindly enclose a signed copy of this document along with the TENDER Document]
T.K.M. COLLEGE OF ARTS & SCIENCE KOLLAM, Kerala 6900, INDIA www.tkmcas.ac.in Tender No 20/FIST/ ITEMS PURCHASE OF LAB EQUIPMENTS FOR CHEMISTRY [Kindly enclose a signed copy of this document along with
More informationMicrowave Multilayer SMD Ceramic Capacitor 0201 to 0805 Sizes (6.3V to 500V), NP0 Dielectric, (MCRF)Series
Description: MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. WTC RF series
More informationTechnical Data Sheet Silicon Planar PIN Photodiode
Technical Data Sheet Silicon Planar PIN Photodiode Features Daylight filter High sensitivity Low capacitance Short switching time Wide temperature range Small package Pb free The product itself will remain
More informationCOPAL ELECTRONICS. F T T V 5 k Ω ( ) SINGLE TURN CERMET TRIMMERS FEATURES PART NUMBER DESIGNATION
SINGLE TURN INTERNAL STRUCTURE 4 5 8 6 FEATURES Lead-free soldering, Cadmium-free Nominal resistance tolerance ± 0 % O ring sealed and washable Suitable for automatic insertion and automatic adjustment
More informationOPERATION MANUAL. Acceleration, Velocity RMS measurement, Metric & Imperial unit PEN VIBRATION METER Model : PVB-820
Acceleration, Velocity RMS measurement, Metric & Imperial unit PEN VIBRATION METER Model : PVB-820 Your purchase of this PEN VIBRATION METER marks a step forward for you into the field of precision measurement.
More informationPilot operated 2 port solenoid valve (general purpose valve) Standard specifications NC (normally closed) type C C. 2 /s) Starting
21/22 Series (general purpose valve) 21/22 Series NC (normally closed) type, NO (normally open) type Port size: Rc1 1/4 to Rc2, 32 to 50 flange iaphragm structure JIS symbol 21: Common specifications Item
More informationPRODUCT SPECIFICATION
Page 1 Page 2 1.0 SCOPE. This specification covers performance, tests and quality requirements for the SIM Card Connector SIM 2055 (Receiver Type, 6-Pin, SMT, 1.8 & 2.2mm Profiles). 2.0 PRODUCT NAME AND
More informationLow Inductance Ceramic Capacitor (LICC)
Low Inductance Ceramic Capacitor (LICC) LICC(Low Inductance Ceramic Capacitor) is a kind of MLCC that is used for decoupling in High Speed IC. The termination shape of LICC is different from that of MLCC.
More informationEN: This Datasheet is presented by the manufacturer. Please visit our website for pricing and availability at ore.hu.
EN: This Datasheet is presented by the manufacturer. Please visit our website for pricing and availability at www.hest ore.hu. Description: MLCC consists of a conducting material and electrodes. To manufacture
More informationMULTILAYER CERAMIC CAPACITORS
MULTILAYER CERAMIC CAPACITORS 1. INTRODUCTION MLCC Consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic
More informationOpen-mode Design Capacitors
Open-mode Design Capacitors HOW TO ORDER OP 32 B 103 K 201 C T Series Size Dielectric Capacitance Tolerance Rated voltage Termination Packaging OP=Open-mode 21=0805 (2012) 31=1206 (3216) B=X7R Two significant
More informationSTATIC GAS MONITOR Type SGM/DEW Revision A of 20 aprile 2016
APPLICATIONS Moisture monitoring of air or gas (SF6) Suitable for indoor or outdoor Industrial, medical or aerospace fields HIGHLIGHTS High voltage circuit breakers commonly used for distribution and transmission
More informationRelative pressure transmitter type 520
Relative pressure transmitter type 520 Pressure range The compact type 520 pressure transmitter is based upon the Huba Control developed thick film technology where the pressure measuring cell is fully
More informationAcceleration/Velocity/Displacement VIBRATION METER
Acceleration/Velocity/Displacement VIBRATION METER Model : VB-8220 Your purchase of this VIBRATION METER marks a step forward for you into the field of precision measurement. Although this METER is a complex
More informationMetal Oxide Varistor:TVM-B Series
Features. RoHS & Halogen Free (HF) compliant. EIA size: 040 ~ 0 3. Operating voltage: 5.5Vdc ~ 85Vdc 4. High surge suppress capability 5. Bidirectional and symmetrical V/I characteristics 6. Multilayer
More informationNTC Thermistor:TSM Series
Features. RoHS & Halogen Free (HF) compliant. EIA size: 00, 00, 00, 080. Highly reliable structure. Operating temperature range: -0 ~+. Wide resistance range. Cost effective. Agency recognition: UL / cul
More informationIndustrial Pressure Transmitter
ECT 87 Industrial Pressure Transmitter Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for measurement of and temperature. The economical transmitter
More informationMULTILAYER CERAMIC CAPACITORS High Q / Low ESR Series (HH) 0201 to 0805 Sizes NP0 Dielectric Halogen Free & RoHS Compliance
MULTILAYER CERAMIC CAPACITORS High Q / Low ESR Series (HH) 0201 to 0805 Sizes NP0 Dielectric Halogen Free & RoHS Compliance *Contents in this sheet are subject to change without prior notice. Page 1 of
More informationSPECIFICATION. 1. Scope This specification applies ferrite Chip common mode filters C3-2012F-Series to be delivered to user.
C C3-202F-Series. Scope This specification applies C3-202F-Series to be delivered to user. 2. Product Identification C3-202 F - 900-2P - T () (2) (3) (4) (5) (6) () Product name (2) Shapes and dimensions
More informationMULTILAYER CERAMIC CAPACITORS General Purpose Series (10V to 100V) 0402 to 1812 Sizes NP0, X7R & Y5V Dielectrics RoHS Compliance
MULTILAYER CERAMIC CAPACITORS General Purpose Series (10V to 100V) 0402 to 1812 Sizes NP0, X7R & Y5V Dielectrics RoHS Compliance *Contents in this sheet are subject to change without prior notice. Page
More informationAll part numbers in the coding below start with "TC-" and end with "203"
1. Scope: This specification for approval relates to 2. Type designation: The type designation shall be in the following form : All part numbers in the coding below start with "TC-" and end with "203"
More informationCoriolis Mass Flowmeter. (MCM Series) 100% Customer Satisfaction MAXIFLO TM. Coriolis Mass Flowmeter Series MCM
MAXIFO TM Features MaxiFlo Coriolis Mass Flowmeter series MCM is a mass flow meter that measures mass flow, density and temperature of liquids, slurries and gases. And it even measures oil content in water.
More informationThe Ordering Code for various standard model Recorders with an AC supply and without any additional options are as follows:
The basic PC software is supplied free with the recorder. There is an additional charge for the extensive Data Acquisition Software supplied with communication of RS-232/422/485 or Ethernet. The Ordering
More informationAcceleration, Velocity, Separate probe VIBRATION METER Model : VB-8202
Acceleration, Velocity, Separate probe VIBRATION METER Model : VB-8202 Your purchase of this VIBRATION METER marks a step forward for you into the field of precision measurement. Although this METER is
More informationChip Inductors. LCCM Series Chip Common Mode Filter FEATURES CONSTRUCTION
FEATURES Small wire wound chip inductor with ferrite core and 2 common mode lines. Highly effective in noise suppression High common-mode impedance at noise band an low differential mode impedance at signal
More informationLow-Voltage Analog Temperature Sensors in SC70 and SOT23 Packages
19-2040; Rev 1; 6/01 Low-Voltage Analog Temperature Sensors General Description The precision, low-voltage, analog output temperature sensors are available in 5-pin SC70 and SOT23 packages. The devices
More informationS-7000 ROTARY CODED SWITCHES (SMD) S E T A FEATURES PART NUMBER DESIGNATION. Please refer to the LIST OF PART NUMBERS when placing orders.
S- RoHS compliant INTERNL STRUCTURE Part name Material lammability ETURES Cover Stainless steel (SUS ) O ring Rotor Spacer Moving contact ixed contact Silicone rubber Polyphenylenesulphide Stainless steel
More informationULTRA OVAL Meter Sizes:39, 41, 45, 50, 52, 53 w/unfactored Pulse Generator (NPG60A)
ULTRA OVAL Meter Sizes:9, 4, 45, 50, 5, 5 w/unfactored Pulse Generator (NPG60A) GENERAL SPECIFICATION GS.No.GBU0--E GENERAL ULTRA OVAL MODEL 9, 4, and45 provides extensive capability as a highly dependable
More informationSC-1000/2000 ROTARY CODED SWITCHES S C T B FEATURES PART NUMBER DESIGNATION. Please refer to the LIST OF PART NUMBERS when placing orders.
SC-00/2000 RoHS compliant INTERNAL STRUCTURE SC-00 / 2000 series 4 2 3 6 7 5 FEATURES Part name Material Flammability Housing Metallic spring O ring Insert rotor Polyphenylenesulphide Stainless (SUS 30)
More informationFT-63 SINGLE TURN CERMET TRIMMERS. F T E T V 5 k Ω ( ) FEATURES PART NUMBER DESIGNATION. RoHS compliant
SINGLE TURN FT-6 RoHS compliant INTERNAL STRUCTURE 4 5 8 6 FEATURES RoHS compliant Resistance tolerance ± 0 % O ring sealed (Washable: Refer to 68) Suitable for automatic insertion and automatic adjust
More informationSafety Certificated Capacitors X2/Y3
Safety Certificated Capacitors X2/Y3 HOW TO ORER S3 42 N 100 J 202 L T Series Size ielectric Capacitance Tolerance Rated voltage Termination Packaging S3=X2/Y3 42=1808 (4520) 43=1812 (4532) N=NP0 (C0G)
More informationPressure Display Controller
MODEL DW Display Controller Low The Model DW pressure controller accurately monitors and controls very low pressures. It combines in one enclosure a low pressure transducer, a digital display and two alarms
More informationISOCON-6. 24V AC or DC POWERED ISOLATING SIGNAL CONVERTER
ISOCON-6 24V AC or DC POWERED ISOLATING SIGNAL CONVERTER Whilst every effort has been taken to ensure the accuracy of this document, we accept no responsibility for damage, injury, loss or expense resulting
More informationMULTILAYER CERAMIC CAPACITORS Low Profile Series 0402 to 1210 Sizes X7R, X5R & Y5V Dielectrics Halogen Free & RoHS Compliance
MULILAYER CERAMIC CAPACIORS Low Profile Series 0402 to 1210 Sizes X7R, X5R & Y5V s Halogen Free & RoHS Compliance *Contents in this sheet are subject to change without prior notice. Page 1 of 9 ASC_ Low
More informationNo Item Code Description Series Reference. Thickness. M B min (mm) T (mm) code. See Thickness Specification Reference Table below
FEATURE A wide selection of sized is available (0201 to 2225) High capacitance in given case size Capacitor with lead-free termination (pure Tin) RoHS and HALOGEN compliant. Application: DC to DC converter.
More informationSolenoid valves Type EVUL
Data sheet Solenoid valves EVUL EVUL solenoid valves are designed to fit into compact refrigeration systems. Available in servo operated versions they can be applied in liquid, suction, and hot gas lines.
More informationTHERMOCOUPLE CHARACTERISTICS TRAINER
THERMOCOUPLE CHARACTERISTICS TRAINER (Model No : ) User Manual Version 2.0 Technical Clarification /Suggestion : / Technical Support Division, Vi Microsystems Pvt. Ltd., Plot No :75,Electronics Estate,
More informationMultilayer Ceramic Capacitors High Capacitance Series
Applications: Description: MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used.
More informationThermal-Magnetic Circuit Breaker 2210-S2..
Thermal-Magnetic Circuit Breaker -S.. Description One, two and three pole thermal-magnetic circuit breakers with trip free mechanism and toggle actuation (S-type TM CBE to EN 6094/IEC 94). Designed for
More informationHigh Q / Low ESR Multilayer SMD Ceramic Capacitor 0402, 0603 & 0805 Sizes, NP0 Dielectric, (MCHH)Series
Description: MLCC consists of a conducting material and electrodes. To manufacture a chip-type SMT and achieve miniaturization, high density and high efficiency, ceramic condensers are used. WTC HH series
More informationMULTILAYER CERAMIC CAPACITORS Microwave Series (RF) to 1111 Sizes (6.3V to 1500V) NP0 Dielectric Halogen Free & RoHS Compliance
MULTILAYER CERAMIC CAPACITORS Microwave Series (RF) 01005 to 1111 Sizes (6.3V to 1500V) NP0 Dielectric Halogen Free & RoHS Compliance *Contents in this sheet are subject to change without prior notice.
More information35P-3 HH 3 HH 2 35P-3. f32 f40. f50 f63. f80 f100. Switch Set. Type Standard type Switch Set
f f f f f f Kind of piston seal U seal Slipper Seal U seal Slipper Seal Nominal pressure. MPa Maximum allowable pressure. MPa Proof test pressure MPa Minimum operating pressure. MPa or less Working speed
More informationTechnical Data Sheet Silicon PIN Photodiode
Technical Data Sheet Silicon PIN Photodiode Features Fast response time High photo sensitivity Small junction capacitance Pb free The product itself will remain within RoHS compliant version. Descriptions
More information200 kpa On-Chip Temperature Compensated Silicon Pressure Sensors
Freescale Semiconductor Data Sheet: Technical Data Pressure Document Number: Rev 8, 10/2012 200 kpa On-Chip Temperature Compensated Silicon Pressure The devices series are silicon piezoresistive pressure
More informationThermal-Magnetic Circuit Breaker 2210-S2...
Thermal-Magnetic Circuit Breaker 0-S... Description One, two and three pole thermal-magnetic circuit breakers with trip free mechanism and toggle actuation (S-type TM CBE to EN 60934/IEC 934). Designed
More informationThermal-Magnetic Circuit Breaker 2210-S2...
Description One, two and three pole thermal-magnetic circuit breakers with trip free mechanism and toggle actuation (S-type TM CBE to EN 6094/IEC 94). Designed for panel or plug-in mounting. Available
More informationSilicon Temperature Sensors KT 100 KT 110 KT 130 KT 210 KT 230. KTY 11-x KTY 13-x KTY 21-x KTY 23-x KTY 19-6 KTY 16-6
Silicon Temperature Sensors KT 100 KT 110 KT 130 KT 210 KT 230 KTY 16-6 KTY 10-x KTY 11-x KTY 13-x KTY 21-x KTY 23-x KTY 19-6 Features Temperature dependent resistor with positive temperature coefficient
More informationTechnical Data Sheet 3mm Silicon PIN Photodiode T-1
Technical Data Sheet 3mm Silicon PIN Photodiode T- Features Fast response time High photo sensitivity Small junction capacitance Descriptions is a high speed and high sensitive PIN photodiode in a standard
More informationIndustrial Pressure Transmitter
ECT 87 Industrial Pressure Transmitter Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for measurement of and temperature. The economical transmitter
More informationOPERATION MANUAL. 3 in 1, IR, Type K/J/R/E/T, Pt 100 ohm THERMOMETER. Model : TM-2000
3 in 1, IR, Type K/J/R/E/T, Pt 100 ohm THERMOMETER Model : TM-2000 Your purchase of this THERMOMETER marks a step forward for you into the field of precision measurement. Although this THERMOMETER is a
More informationProduct Data Sheet PD-0037-B
Product Data Sheet PD-0037-B 3M Shielded Compact Ribbon (SCR) Connector 3M Shielded Compact Ribbon (SCR) Boardmount Right Angle 36110-2220 XX 3 Electronic Solutions Division Page: 1 of 12 Table of Contents
More informationEAPL4040WA1. SMD Side View LEDs PRELIMINARY. Features. Applications.
SMD Side View LEDs PRELIMINARY Features Fluorescence Type High Luminous Intensity High Efficiency Pb-free. The product itself will remain within RoHS compliant version. ESD protection. Applications OA
More information2W, 2816, SL Type Low Resistance Chip Resistor (Lead / Halogen Free)
2W, 2816, SL Type (Lead / Halogen Free) 1. Scope This specification applies to 4.2mm x 7.1mm size 2W, fixed metal foil current sensing resistors used in electronic equipment. 2. Features / Applications
More informationPREJECTION INDUSTRIAL CORP. 百泉工業股份有限公司
: 1 OF 11 1. Features High performance (Isat) realized by metal dust core. Performance low resistance,high current rating. Low loss realized with low DCR. Frequency range : up to (1.0 MHz). 100% lead (pb)
More informationTHM80X Series Feature Application. Temperature & Humidity / Flow Measuring Specialist
THM80X Series Feature Application IP67 protection degree, rugged aluminum case, fit in variety harsh environment Capable of temperature compensation Linear adjustment temperature & humidity by computer,
More informationMULTILAYER CERAMIC CAPACITORS Low Inductance Series 0612 Size, 50V X7R Dielectric Halogen Free & RoHS Compliance
MULTILAYER CERAMIC CAPACITORS Low Inductance Series 0612 Size, 50V X7R Dielectric Halogen Free & RoHS Compliance *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_Low
More informationhandbook, 050/052 4 columns smaller
4/5 PED-ST FEATURES Polarized aluminium electrolytic capacitors, non-solid Large types, cylindrical aluminium case, insulated with a blue sleeve Also available in bolt version (PED-STB) Pressure relief
More informationMULTILAYER CERAMIC CAPACITORS Open-Mode Series (50V to 630V) 0805 to 1812 Sizes X7R Dielectric Halogen Free & RoHS Compliance
MULTILAYER CERAMIC CAPACITORS Open-Mode Series (50V to 630V) 0805 to 1812 Sizes X7R Dielectric Halogen Free & RoHS Compliance *Contents in this sheet are subject to change without prior notice. Page 1
More information473 Dew Point Hygrometer
gh Performance Chilled Hygrometer With Cable Mounted Measuring Heads ghly precise chilled mirror dew point technology Cable mounted dew point and temperature measurement Aspirated and direct insertion
More informationCeramic PTC Thermistor: PPL Series
Features. RoHS compliant 2. Leaded type 3. Voltage rating: 270V ac ~500V ac 4. Resistance range:0~000ω 5. Stable over a long time 6. Operating temperature range: -20 ~ +85 C (V=V max ) -40 ~ +25 C (V=0)
More information