Technical Data Sheet Top View LEDs

Transcription

1 eatures Super-luminosity chip LED. White SMT package. Built in Red, Green, and Blue chips. Lead frame package with individual 6 pins. Wide viewing angle. Soldering methods: IR reflow soldering. Pb-free. The product itself will remain within RoHS compliant version. Descriptions Due to the package design, has wide viewing angle, and low power consumption. The white LED which was fabricated using blue LEDs and a phosphor, and the phosphor is excited by blue light and emits yellow fluorescence.the mixture of blue light and yellow light results in a white emission. And makes it ideal for light pipe application. Applications Amusement equipment. Information boards. lashlight for digital camera of cellular phone. Device Selection Guide Chip Type Material Emitted Color Resin Color RS AlGaInP Brilliant Red GC InGaN Brilliant Green Water Clear BK InGaN Blue Everlight Electronics Co., Ltd Rev. 1 Page: 1 of 14

2 Package Outline Dimensions Green Red Blue Note: The tolerances unless mentioned is ±.1mm; Unit = mm Everlight Electronics Co., Ltd Rev. 1 Page: 2 of 14

3 Absolute Maximum Ratings (Ta=25 ) Parameter Symbol Rating Unit Reverse Voltage V R 5 V RS orward Current I GC 3 ma BK 3 RS Peak orward Current (Duty 1KHZ) I P GC ma BK RS 12 Power Dissipation Pd GC 1 mw BK 1 Electrostatic Discharge(HBM) ESD V Operating Temperature Topr -4 ~ +85 Storage Temperature Tstg -4~ +9 Soldering Temperature Tsol Reflow Soldering : 26 for sec. Hand Soldering : 3 for 3 sec. Everlight Electronics Co., Ltd Rev. 1 Page: 3 of 14

4 Electro-Optical Characteristics (Ta=25 ) Notes: Parameter Symbol Min. Typ. Max. Unit Condition Luminous Intensity Iv 1.Tolerance of Luminous Intensity: ±11% 2.Tolerance of Dominant Wavelength: ±1 nm 3.Tolerance of orward Voltage: ±.1V RS GC BK mcd Viewing Angle 2θ 1/ deg Peak Wavelength Dominant Wavelength Spectrum Radiation Bandwidth orward Voltage Reverse Current λp λd λ V I R RS GC BK RS GC BK RS GC BK RS GC BK RS GC BK nm nm nm V µa V R =5V Everlight Electronics Co., Ltd Rev. 1 Page: 4 of 14

5 Bin Range of Luminous Intensity Symbol Bin Code Min. Max. Unit Condition U RS U V GC W W mcd S BK T T Bin Range of Dominant Wavelength Symbol Bin Code Min. Max. Unit Condition E RS E E GC X Y nm BK X Y Notes: 1.Tolerance of Luminous Intensity: ±11% 2.Tolerance of Dominant Wavelength: ±1 nm Everlight Electronics Co., Ltd Rev. 1 Page: 5 of 14

6 Bin Range of orward Voltage Symbol Bin Code Min. Max. Unit Condition RS GC V BK Note: Tolerance of orward Voltage: ±.1V Everlight Electronics Co., Ltd Rev. 1 Page: 6 of 14

7 Typical Electro-Optical Characteristics Curves (RS) Relative luminous intensity (%) Relative luminous intensity (%) Spectrum Distribution Wavelength λ (nm) Relative Luminous Intensity vs. Ambient Temperature Ambient Temperature T a( C) orward Current I (ma) Relative luminous intensity (%) orward Current vs. orward Voltage orward Voltage V (volts) Relative Luminous Intensity vs. orward Current f=1khz Duty=1/ orward Current I (ma) orward Current Derating Curve Radiation Diagram 2 3 orward Current I (ma) Ambient Temperature T ( C) a Everlight Electronics Co., Ltd Rev. 1 Page: 7 of 14

8 Typical Electro-Optical Characteristics Curves (GC) Relative luminous intensity (%) Spectrum Distribution Wavelength λ (nm) orward Current I (ma) orward Current vs. orward Voltage orward Voltage V (V) 4. Relative luminous intensity (%) 1-6 Relative Luminous Intensity vs. Ambient Temperature Ambient Temperature T ( C) a 8 Relative luminous intensity (%) 1 Relative Luminous Intensity vs. orward Current f=1khz Duty=1/ 1 2 orward Current I (ma) I (ma) 6 Radiation Diagram 2 3 orward Current Ambient Temperature T ( C) a Everlight Electronics Co., Ltd Rev. 1 Page: 8 of 14

9 Typical Electro-Optical Characteristics Curves (BK) Relative luminous intensity (%) Spectrum Distribution Wavelength λ (nm) orward Current I (ma) orward Current vs. orward Voltage orward Voltage V (V) 4. Relative luminous intensity (%) 1-6 Relative Luminous Intensity vs. Ambient Temperature Ambient Temperature T ( C) a 8 Relative luminous intensity (%) 1 Relative Luminous Intensity vs. orward Current f=1khz Duty=1/ 1 2 orward Current I (ma) I (ma) 6 Radiation Diagram 2 3 orward Current Ambient Temperature T ( C) a Everlight Electronics Co., Ltd Rev. 1 Page: 9 of 14

10 Label Explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank RE: orward Voltage Rank Pb CPN : P N : XXXXXXXXXXXXX XXXXXXXXXXXXX QTY : XXX LOT NO : XXXXXXXXXX EVERLIGHT CAT : XXX HUE : XXX RE : XXX RoHS Reference : XXXXXXXX MADE IN TAIWAN Reel Dimensions Note: Tolerance unless mentioned is ±.1mm; Unit = mm Everlight Electronics Co., Ltd Rev. 1 Page: of 14

11 Carrier Tape Dimensions: Loaded Quantity 8 pcs Per Reel Note: Tolerances unless mentioned is ±.1mm; Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Label Everlight Electronics Co., Ltd Rev. 1 Page: 11 of 14

12 Reliability Test Items and Conditions The reliability of products shall be satisfied with items listed below. Confidence level:9% LTPD:% No. Items Test Condition 1 Reflow Soldering Temp. : 26 ±5 Max. sec. Test Sample Ac/Re Hours/Cycles Size 6 Min. 22 PCS. /1 2 Temperature Cycle 3 Thermal Shock H : + 15min 5 min L : -4 15min H : + 5min sec L : - 5min 3 Cycles 22 PCS. /1 3 Cycles 22 PCS. /1 4 High Temperature Storage Temp. : Hrs. 22 PCS. /1 5 Low Temperature Storage Temp. : -4 Hrs. 22 PCS. /1 6 DC Operating Life I = 2 ma Hrs. 22 PCS. /1 7 High Temperature / High Humidity 85 / 85%RH Hrs. 22 PCS. /1 Everlight Electronics Co., Ltd Rev. 1 Page: 12 of 14

13 Precautions for Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 3 or less and 9%RH or less. 2.3 After opening the package: The LED's floor life is 168 hours under 3 or less and 6% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 6±5 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile Above255 C 3sec.Max. 3 C/sec.Max. Pre-heating 1~2 C 6~12sec. Above 217 C 6~1sec. 26 C Max. sec. Max. 6 C/sec.Max. 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd Rev. 1 Page: 13 of 14

14 4. Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 3 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5. Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Tel: , Office: No 25, Lane 76, Sec 3, Chung Yang Rd, ax: , , Tucheng, Taipei 236, Taiwan, R.O.C Everlight Electronics Co., Ltd Rev. 1 Page: 14 of 14