Effect of functionally graded materials on resonances of rotating beams

Size: px
Start display at page:

Download "Effect of functionally graded materials on resonances of rotating beams"

Transcription

1 Proceedings of the IMAC-XXVIII February 1 4, 21, Jacksonville, Florida USA 21 Society for Experimental Mechanics Inc. Effect of functionally graded materials on resonances of rotating beams Arnaldo J. Mazzei, Jr. Department of Mechanical Engineering C. S. Mott Engineering and Science Center Kettering University 17 West Third Avenue Flint MI, 4854, USA Richard A. Scott Department of Mechanical Engineering University of Michigan G44 W. E. Lay Automotive Laboratory 1231 Beal Avenue Ann Arbor MI, 4819, USA NOMENCLATURE A, area of the beam cross section acmn,,,, constant numerical parameters b hub radius E, Young s modulus ( E, E, b E - distinct values of Young s modulus for different FGM cases) t Ft (), system generalized external forcing I, area moment of inertia of the beam cross section J, mass moment of inertia of the beam and hub about nn 3 K, system generalized stiffness L, beam length L, Lagrangian M, system generalized mass r, distance from hub of a generic point P on the beam (undeformed configuration) R, O beam cross section radius T, kinetic energy t, time V, potential energy V, a potential energy due to axial elongation V, s potential energy due to bending x, longitudinal coordinate (along aa 1 ) w, beam deflection in the aa 2 direction a 1, a 2, a 3 A P acceleration of a generic point P on the beam n 1, n 2, n 3 R P position of a generic point P on the beam V P velocity of a generic point P on the beam β1, λσ,, constant numerical parameters 1 η, function of time θ, hub angular position ρ, mass density ( ρ, ρ, b ρ - distinct values of mass density for different FGM cases) t

2 τ () t, external moment υ, Poisson s ratio ϕ, spatial function ω n, fundamental frequency of the beam Ω, angular velocity of the hub ( Ω = dddd dddd ), derivative with respect to time ( dd dddd ), derivative with respect to longitudinal coordinate ( dd dddd ABSTRACT Radially rotating beams attached to a rigid stem occur in several important engineering applications, such as helicopter and turbine blades and certain aerospace applications. In most studies the beams have been treated as homogeneous. Here, with a goal of system improvement, non-homogeneous beams made of functionally graded materials are explored. Effects on natural frequency and coupling between rigid and elastic motions are investigated. Euler-Bernoulli theory, with Young s modulus and density varying in a power law fashion, together with an axial stiffening effect, are employed. The equations of motion are derived using a variational method and an assumed mode approach. Results for the homogenous and non-homogeneous cases are treated and compared. Preliminary results show that allowing the Young s modulus and the density to vary by approximately 2.15 and 1.15 times, respectively, gives an increase of 28% in the lowest bending natural frequency of the beam, an encouraging trend. INTRODUCTION Rotating machinery form an important part of engineering and radially rotating beams constitute a major category of such systems. For instance, rotor blades, propellers and turbines fall into this category. For vibration control, it is important to identify possible system resonances and, if required and possible, change these values. Extensive work on these types of problems has been done in the aerospace literature. Comprehensive reviews can be found in the papers of Kane and Ryan [1] and Haering et al. [2]. They, and others, showed that at high speeds the rotating structure can be prone to instabilities. It is assumed here that the rotational speeds are small enough that no instabilities are encountered. There are numerous works on vibrations of radially rotating beams (uniform beams, beams including pre-twisted and tapered beams). Two classes of problems arise, namely, prescribed motions and prescribed torques. Earlier studies on the former type of problem can be found in the texts by Putter and Manor [3], Hoa [4], Hodges and Rutkwoski [5] and Hodges [6]. Putter and Manor used a finite element approach to obtain the natural frequencies and mode shapes of the beam, including shearing forces, rotary inertia and varying centrifugal forces. Hoa also utilized a finite element approach for the same objective, but effects of root radius, setting angle and tip mass were included. Hodges used asymptotic expansions to obtain an approximate value for the fundamental frequency of a uniform beam and Hodges and Rutkwoski used a finite element approach to calculate the eigenvalues and eigenvectors of the beam including different hub radii, tapered beams and beams with discontinuities. Kojima [7] investigated the transient flexural vibrations of a beam / mass system attached to a rotating rigid body. The prescribed torque problem has been studied by, for example, Yigit et al. [8], a work which the current closely follows. In that work the flexural motion of a rotating beam was investigated by using a specified torque profile to drive the rotating body (so that the rigid body motion was not known a priori). Lee et al. [9] presented experimental results confirming that centrifugal effects cannot be neglected, even at first order, when modeling these systems. Models utilizing a Timoshenko beam type approach (other than Euler-Bernoulli) are also numerous. See, for example, the work of Lin and Hsiao [1] which investigates the effect of Coriolis force on the natural frequencies of the rotating beam. More involved models including base excitation can be found in references [11] and [12].

3 The fundamental frequency of rotating beams with pre-twist was investigated by, for example, Hu et al. ([13]). The role of Functionally Graded Materials (FGM - see for instance reference [14]) in radially rotating beams has not been fully investigated. Librescu et al. [15], in a prescribed motion problem, studied the effects of material variation through the beam thickness on the eigenfrequencies of the system. In the present work a prescribed torque problem is investigated with material properties varying along the length of the beam. The possibility of changing the fundamental frequency of vibration of a cantilever radially rotating beam is investigated. The approach includes changing the material of the beam from a homogeneous type to a FGM while keeping the physical dimensions of the beam constant. A one-term Galerkin approach is utilized and the investigation is conducted using numerical simulation. Preliminary results, using linearized versions of the equations of motion, indicate that, in the case of a beam made of Aluminum / Silicon Carbide, the fundamental frequency can be increased by approximately 28% when compared to a pure aluminum beam. This change was obtained by the use of a material that shows a Young s modulus increase of about 2.15 times over the length of the beam. The density increase is about 1.15 times. MODELING Figure 1 shows a beam with length attached to a rigid hub of radius bb. The hub rotates radially with angular velocity Ω and is subjected to an external moment ττ(tt). A set of mutually perpendicular unit vectors aa 1, aa 2 and aa 3 is attached to the undeformed configuration of the beam. A second set of mutually perpendicular unit vectors, nn 1, nn 2 and nn 3 is assumed to be the inertial reference frame. The vector nn 3 is the axis of rotation for the hub and remains parallel to aa 3 during motion. ΘΘ is the angle between the vector nn 1 and aa 1 and defines the angular position of the hub with respect to the inertial frame. Note that Ω = dddd dddd. For rotation on the plane, the position, velocity and acceleration of point P on the deformed configuration of the beam are given, respectively, by: RR pp = (bb + rr)aa 1 + wwaa 2 VV pp = wwθθ aa 1 + [(bb + rr)θθ + ww] aa 2 AA pp = [2ww θθ +(bb + rr)θθ 2 + wwθθ ] aa 1 + [ww + (bb + rr)θθ wwθθ 2 ] aa 2 (1) (2) (3) The kinetic energy of the beam can be computed from (note rr = xx ): TT = 1 2 ρρ(xx)aa 2 + 2θθ (bb + xx) + θθ 2 [(bb + xx) 2 + ww 2 ] dddd JJ 2 θθ (4) The potential energy of the system comes from two parts. The first part is caused by the bending elastic strain. Using Euler-Bernoulli beam theory, this can be calculated by: VV ss = 1 2 EE(xx)II ww ( 2 xx 2 )2 dddd (5)

4 Rotating cantilever beam v Rigid hub P ττ(tt) Figure 1 Rotating cantilever beam The second part is due to the centrifugal force acting on the beam, which causes axial elongation (see, for example, reference [12]). It is given by: The total potential energy is obtained from: VV aa = 1 ( 2 )2 ρρ(xx)aa[θθ 2 (bb + xx) + 2θθ + wwθθ ] dddd dddd xx (6) VV = VV ss + VV aa. (7) To derive the equations of motion an assumed mode approach is adopted. The following form for the one-mode approximation is assumed for the elastic form. ww(xx, tt) = φφ(xx)ηη(tt) (8) where φφ(xx) is a spatial function that satisfies the geometric boundary conditions at the clamped end of the beam.

5 The Lagrangian [16] can then be written as: L = TT VV = 1 2 ρρ(xx)aa φφ2 ηη 2 + 2θθ φφηη (bb + xx) + θθ 2 [(bb + xx) 2 + φφ 2 ηη 2 ] dddd JJθθ EE(xx)IIφφ"2 ηη 2 + φφ 2 ηη 2 ρρ(xx)aa[θθ 2 (bb + xx) + 2θθ φφηη + φφφφθθ ] dddd dddd xx (9) In a prescribed motion problem, θθ is known a priori and then one equation of motion is obtained from (9). When a torque is prescribed θθ is a generalized coordinate and two coupled non-linear equations of motion are obtained. Solutions to these equations are computationally intensive and, to obtain preliminary results, simplified versions of the equations are utilized in the following. From the Lagrangian, linearized 1 equations of motion can be obtained as follows. ρρ (xx)aaφφ 2 dddd ηη + ρρ ρρ (xx)aaaa(bb + xx)dddd θθ + EE(xx)IIφφ" 2 dddd ηη = (xx)aaaa(bb + xx)dddd ηη + JJ + ρρ (xx)aa(bb + xx) 2 dddd θθ = ττ(tt) (1) (11) Note that here, as done in reference [8], the rotation of the hub is not assumed to be prescribed. Next equation (11) is solved for θθ and the result is substituted into equation (1). This leads to: MMηη + KKKK = FF(tt) (12) where MM = ρρ(xx)aaφφ 2 dddd ρρ(xx)aaaa(bb + xx)dddd 2 JJ + ρρ(xx)aa(bb + xx) 2 dddd, KK = EE(xx)IIφφ" 2 dddd, FF(tt) = ρρ(xx)aaaa(bb + xx)dddd ττ(tt) JJ + ρρ(xx)aa(bb + xx) 2 dddd It follows from equation (12) that the fundamental frequency is: ωω nn = KK MM (13) 1 2 Following Yigit et al [8], terms involving θθ are neglected. With this simplification equation (11) can be solved for θθ and substituted into equation (1).

6 In the preceding, no assumption was made concerning the material type in the derivation of the equations of motion. In the following both homogeneous and non-homogeneous material types are considered. The nonhomogeneous materials utilized here are FGMs. Two different models are employed, one involving power law variations (aluminum / silicon carbide) and another based on a volume fraction approach (aluminum / steel). Results for the fundamental frequency of the FGM beams are compared to those for a pure aluminum beam. FGM I The first FGM model is based on the one described by Chiu and Erdogan [17]. The material is assumed to be isotropic and non-homogeneous with properties given by: x x ( ) = ( + 1) m, ρ( x) = ρ( a + 1) n L Ex E a L (14) where a, m and n are arbitrary real constants with a > 1. E and ρ are the Young s modulus and mass density at x =. In the sequel the FGM utilized is a composite made from aluminum and silicon carbide. The properties of the material are given in Table 1 and are taken from reference [17]. Aluminum / Silicon Carbide E ( GPa ) ρ ( kg / m ) 271. a m 1. n υ.33 Table 1 Material properties for Al / SiC FGM Note that in this model Poisson s ratio is taken to be a constant. FGM II The second FGM model is developed by assuming that its composition is derived from of a mixture of two materials, with the material variation given by a power-law gradient (see, for instance, reference [18]). The effective material properties of the beam are given by: x λ x Ex ( ) = Eb + ( Et Eb)( ) L, ρ( x) = ρb + ( ρt ρb)( ) L λ (15) where λλ is a non-negative constant describing the volume fraction, which can be determined experimentally ([18]). The subscripts bb and tt refer to the value of the parameter at xx = and xx =, respectively. These values are the ones for the pure materials involved in the composition of the FGM and are obtained from tables or manufacturer s specifications. Also, Poisson s ratio varies slightly but it is usually taken to be constant.

7 NUMERICAL RESULTS For the numerical simulations, the beam is taken to have a circular cross section with a radius given by RR = 1127 mm. The length of the beam is =.896 mm and the radius of the hub is bb =.5 mm. Also, initially, the mass moments of inertia of the rigid and flexible parts are taken to be related in the following manner: JJ = (.5)( ρρ(xx)aa(bb + xx) 2 dddd) (this corresponds to an inertia ratio of.5). The spatial function chosen to be used in equation (12) is the first mode shape of a non-rotating cantilever beam (see, for example, [19]): CC(cosh(ββ 1 xx) cos(ββ 1 xx) σσ 1 [sinh(ββ 1 xx) sin(ββ 1 xx)]) where CC is a constant, ββ 1 = and σσ 1 = (sinh(ββ 1 ) sin(ββ 1 )) (cosh(ββ 1 ) + cos(ββ 1 ) ). (16) Homogeneous material beam For the homogeneous material, aluminum was chosen. The properties are: 3 ρ = 271 Kg/m. 2 E =.71e11 N/m and In this case the fundamental frequency of the rotating beam, given by equation (13), is ωω nn = HHHH. Note that, if one assumes prescribed motion (θθ = constant) the frequency would be ωω nn = 22.5 HHHH. This is the fundamental frequency of a cantilever beam with the dimensions given in this example. The higher frequency obtained via equation (13) shows the stiffening effect that the rotation produces. Figure 2 Fundamental frequency variation of homogeneous beam as a function of the inertia ratio Figure 2 shows the variation of the fundamental frequency, for this case, as a function of the inertia ratio. It is seen that as the inertia ratio increases the fundamental frequency decreases substantially.

8 FGM I beam For a beam made of Aluminum / Silicon Carbide, the fundamental frequency is ωω nn = 47.4HHHH. When compared to the pure aluminum beam, this result shows a frequency increase of about 28%. The variation of this frequency as a function of the inertia ratio is shown in Figure 3. As in the previous case, inertia ratio increase causes a decrease in the frequency. Figure 3 Fundamental frequency variation of FGM I beam as a function of inertia ratio FGM II beam Next the Aluminum / Steel case is considered. The beam is assumed to be aluminum rich at xx = and steel rich at xx =. Poisson s ratio is taken to be constant: υυ =.33 and λλ = 1 is used. The fundamental frequency for this case is ωω nn = HHHH, which shows a frequency decrease of about 25% when compared to the pure aluminum beam. The frequency variation as a function of the inertia ratio is shown in Figure 4. Equation (12) also allows for a comparison of the generalized masses for each case. By computing the masses, the following observations can be made. The aluminum / steel beam is 2.5 times heavier than the aluminum one. On the other hand the aluminum / silicon carbide beam is only 11% heavier than its aluminum counterpart. Clearly these results show the advantages of using FGM I, when the objective sought is to increase the fundamental frequency of the system while minimizing overall weight gain.

9 Figure 4 Fundamental frequency variation of FGM II beam as a function of inertia ratio CONCLUSIONS The use of FGM for radially rotating cantilever beams can change the fundamental frequency of vibration significantly. For a beam made of aluminum / steel, the frequency decreases by approximately 25% when compared to an aluminum one. This is followed by an increase of 2.5 times in overall weight. The Young s modulus increase is about 3 times over the length of the beam and the density increase is approximately 2.9 times. For this case the use of such FGM may not be practical, or desirable, for the application at hand. For a beam made of aluminum / silicon carbide, the frequency can be increased by approximately 28% when compared to an aluminum beam. This is achieved by the use of a material where the Young s modulus increases about 2.15 times over the length of the beam, whereas density increases about 1.15 times. These changes are considered reasonable. Moreover, these results are achieved with only an 11% increase in weight when compared to an aluminum beam. Here these are considered encouraging results warranting further investigation. REFERENCES [1] Kane, T. R.; Ryan, R. R. and Banerjee, A. K., Dynamics of a cantilever beam attached to a moving base, Journal of Guidance, Control and Dynamics, vol. 1, pp , [2] Haering, W. J.; Ryan, R. R. and Scott, R. A., New formulation for flexible beams undergoing large overall plane motion, Journal of Guidance, Control and Dynamics, vol. 17, pp , [3] Putter, S. and Manor, H., Natural frequencies of radial rotating beams, Journal of Sound and Vibration, vol. 56, pp , [4] Hoa, S. V., Vibration of a rotating beam with tip mass, Journal of Sound and Vibration, vol. 67, pp , [5] Hodges, D. H. and Rutkowski, M. J., Free-vibration analysis of rotating beams by a variable-order finiteelement method, AIAA Journal, vol. 19, pp , [6] Hodges, D. H., An approximate formula for the fundamental frequency of a uniform rotating beam clamped off the axis of rotation, Journal of Sound and Vibration, vol. 77, pp , 1981.

10 [7] Kojima, H., Transient vibrations of a beam / mass system fixed to a rotating body, Journal of sound and vibration, vol. 17, pp , [8] Yigit, A.; Scott, R. A. and Ulsoy, A. G., Flexural Motion of a Radially Rotating Beam Attached to a Rigid Body, Journal of Sound and Vibration, vol. 121, pp , [9] Lee, C. L.; Al-Salem, M. F. and Woehrle, T. G., Natural frequency measurements for rotating spanwise uniform cantilever beams, Journal of Sound and Vibration, vol. 24, pp , 21. [1] Lin, S. C. and Hsiao, K. M., Vibration analysis of a rotating Timoshenko beam, Journal of Sound and Vibration, vol. 24, pp , 21. [11] Hyun, S. H. and Yoo, H. H., Dynamic modelling and stability analysis of axially oscillating cantilever beams, Journal of Sound and Vibration, vol. 228, pp , [12] Tan, T. H.; Lee, H. P. and Leng, G. S. B., Dynamic stability of radially rotating beam subjected to base excitation, Computer methods in applied mechanics and engineering, vol. 146, pp , [13] Hu, X. X.; Sakiyama, T.; Matsuda, H. and Morita, C., Fundamental vibration of rotating cantilever blades with pre-twist, Journal of Sound and Vibration, vol. 271, pp , 24. [14] Miyamoto, Y.; Kaysser, W. A.; Rabin, B. H.; Kawasaki, A. and Ford, R. G., Functionally graded materials: design, processing and applications, 1st ed: Springer, [15] Librescu, L.; Oh, S.-Y.; Song, O. and Kang, H.-S., Dynamics of advanced rotating blades made of functionally graded materials and operating in high-temperature field, Journal of Engineering Mathematics, vol. 61, pp. 1-16, 28. [16] Greenwood, D. T., Principles of Dynamics, Second ed. Englewood Cliffs, N. J.: Prentice-Hall, Inc., [17] Chiu, T.-C. and Erdogan, F., One-dimensional wave propagation in a functionally graded elastic medium, Journal of Sound and Vibration, vol. 222, pp , [18] Li, X.-F., A unified approach for analyzing static and dynamic behaviors of functionally graded Timoshenko and Euler-Bernoulli beams, Journal of Sound and Vibration, vol. 318, pp , 28. [19] Meirovitch, L., Fundamentals of Vibrations: McGraw-Hill, 21.

Structural Dynamics Lecture Eleven: Dynamic Response of MDOF Systems: (Chapter 11) By: H. Ahmadian

Structural Dynamics Lecture Eleven: Dynamic Response of MDOF Systems: (Chapter 11) By: H. Ahmadian Structural Dynamics Lecture Eleven: Dynamic Response of MDOF Systems: (Chapter 11) By: H. Ahmadian ahmadian@iust.ac.ir Dynamic Response of MDOF Systems: Mode-Superposition Method Mode-Superposition Method:

More information

Free Vibrations of Timoshenko Beam with End Mass in the Field of Centrifugal Forces

Free Vibrations of Timoshenko Beam with End Mass in the Field of Centrifugal Forces Mechanics and Mechanical Engineering Vol. 18, No. 1 2014) 37 51 c Lodz University of Technology Free Vibrations of Timoshenko Beam with End Mass in the Field of Centrifugal Forces A. I. Manevich V. Yu.

More information

TECHNICAL NOTE AUTOMATIC GENERATION OF POINT SPRING SUPPORTS BASED ON DEFINED SOIL PROFILES AND COLUMN-FOOTING PROPERTIES

TECHNICAL NOTE AUTOMATIC GENERATION OF POINT SPRING SUPPORTS BASED ON DEFINED SOIL PROFILES AND COLUMN-FOOTING PROPERTIES COMPUTERS AND STRUCTURES, INC., FEBRUARY 2016 TECHNICAL NOTE AUTOMATIC GENERATION OF POINT SPRING SUPPORTS BASED ON DEFINED SOIL PROFILES AND COLUMN-FOOTING PROPERTIES Introduction This technical note

More information

Advanced Structural Analysis EGF Section Properties and Bending

Advanced Structural Analysis EGF Section Properties and Bending Advanced Structural Analysis EGF316 3. Section Properties and Bending 3.1 Loads in beams When we analyse beams, we need to consider various types of loads acting on them, for example, axial forces, shear

More information

BENDING VIBRATIONS OF ROTATING NON-UNIFORM COMPOSITE TIMOSHENKO BEAMS WITH AN ELASTICALLY RESTRAINED ROOT

BENDING VIBRATIONS OF ROTATING NON-UNIFORM COMPOSITE TIMOSHENKO BEAMS WITH AN ELASTICALLY RESTRAINED ROOT BENDING VIBRATIONS OF ROTATING NON-UNIFORM COMPOSITE TIMOSHENKO BEAMS WITH AN EASTICAY RESTRAINED ROOT Sen Yung ee and Jin Tang Yang Department of Mechanical Engineering, National Cheng Kung University,

More information

Mechanics of Materials II. Chapter III. A review of the fundamental formulation of stress, strain, and deflection

Mechanics of Materials II. Chapter III. A review of the fundamental formulation of stress, strain, and deflection Mechanics of Materials II Chapter III A review of the fundamental formulation of stress, strain, and deflection Outline Introduction Assumtions and limitations Axial loading Torsion of circular shafts

More information

Presented By: EAS 6939 Aerospace Structural Composites

Presented By: EAS 6939 Aerospace Structural Composites A Beam Theory for Laminated Composites and Application to Torsion Problems Dr. BhavaniV. Sankar Presented By: Sameer Luthra EAS 6939 Aerospace Structural Composites 1 Introduction Composite beams have

More information

Lecture 15 Strain and stress in beams

Lecture 15 Strain and stress in beams Spring, 2019 ME 323 Mechanics of Materials Lecture 15 Strain and stress in beams Reading assignment: 6.1 6.2 News: Instructor: Prof. Marcial Gonzalez Last modified: 1/6/19 9:42:38 PM Beam theory (@ ME

More information

NONLINEAR VIBRATIONS OF ROTATING 3D TAPERED BEAMS WITH ARBITRARY CROSS SECTIONS

NONLINEAR VIBRATIONS OF ROTATING 3D TAPERED BEAMS WITH ARBITRARY CROSS SECTIONS COMPDYN 2013 4 th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering M. Papadrakakis, V. Papadopoulos, V. Plevris (eds.) Kos Island, Greece, 12 14 June

More information

Study & Analysis of A Cantilever Beam with Non-linear Parameters for Harmonic Response

Study & Analysis of A Cantilever Beam with Non-linear Parameters for Harmonic Response ISSN 2395-1621 Study & Analysis of A Cantilever Beam with Non-linear Parameters for Harmonic Response #1 Supriya D. Sankapal, #2 Arun V. Bhosale 1 sankpal.supriya88@gmail.com 2 arunbhosale@rediffmail.com

More information

Shape Optimization of Revolute Single Link Flexible Robotic Manipulator for Vibration Suppression

Shape Optimization of Revolute Single Link Flexible Robotic Manipulator for Vibration Suppression 15 th National Conference on Machines and Mechanisms NaCoMM011-157 Shape Optimization of Revolute Single Link Flexible Robotic Manipulator for Vibration Suppression Sachindra Mahto Abstract In this work,

More information

COPYRIGHTED MATERIAL. Index

COPYRIGHTED MATERIAL. Index Index A Admissible function, 163 Amplification factor, 36 Amplitude, 1, 22 Amplitude-modulated carrier, 630 Amplitude ratio, 36 Antinodes, 612 Approximate analytical methods, 647 Assumed modes method,

More information

Graduate School of Engineering, Kyoto University, Kyoto daigaku-katsura, Nishikyo-ku, Kyoto, Japan.

Graduate School of Engineering, Kyoto University, Kyoto daigaku-katsura, Nishikyo-ku, Kyoto, Japan. On relationship between contact surface rigidity and harmonic generation behavior in composite materials with mechanical nonlinearity at fiber-matrix interface (Singapore November 2017) N. Matsuda, K.

More information

Appendix C. Modal Analysis of a Uniform Cantilever with a Tip Mass. C.1 Transverse Vibrations. Boundary-Value Problem

Appendix C. Modal Analysis of a Uniform Cantilever with a Tip Mass. C.1 Transverse Vibrations. Boundary-Value Problem Appendix C Modal Analysis of a Uniform Cantilever with a Tip Mass C.1 Transverse Vibrations The following analytical modal analysis is given for the linear transverse vibrations of an undamped Euler Bernoulli

More information

A NEW FLEXIBLE BODY DYNAMIC FORMULATION FOR BEAM STRUCIUGS UNDERGOING LARGE OVERALL MOTION

A NEW FLEXIBLE BODY DYNAMIC FORMULATION FOR BEAM STRUCIUGS UNDERGOING LARGE OVERALL MOTION A NEW FLEXBLE BODY DYNAMC FORMULATON FOR BEAM STRUCUGS UNDERGONG LARGE OVERALL MOTON W. J. Haering Senior Project Engineer General Motors Corporation Warren, Michigan R. R. Ryan' Executive Vice President

More information

Stress analysis of functionally graded discs under mechanical and thermal loads

Stress analysis of functionally graded discs under mechanical and thermal loads Indian Journal of Engineering & Materials Sciences Vol. 8, April 0, pp. -8 Stress analysis of functionally graded discs under mechanical and thermal loads Hasan Çallioğlu, Metin Sayer* & Ersin Demir Department

More information

Mechanical Design in Optical Engineering

Mechanical Design in Optical Engineering Torsion Torsion: Torsion refers to the twisting of a structural member that is loaded by couples (torque) that produce rotation about the member s longitudinal axis. In other words, the member is loaded

More information

Some effects of large blade deflections on aeroelastic stability

Some effects of large blade deflections on aeroelastic stability 47th AIAA Aerospace Sciences Meeting Including The New Horizons Forum and Aerospace Exposition 5-8 January 29, Orlando, Florida AIAA 29-839 Some effects of large blade deflections on aeroelastic stability

More information

A new cantilever beam-rigid-body MEMS gyroscope: mathematical model and linear dynamics

A new cantilever beam-rigid-body MEMS gyroscope: mathematical model and linear dynamics Proceedings of the International Conference on Mechanical Engineering and Mechatronics Toronto, Ontario, Canada, August 8-10 2013 Paper No. XXX (The number assigned by the OpenConf System) A new cantilever

More information

Dynamic Model of a Badminton Stroke

Dynamic Model of a Badminton Stroke ISEA 28 CONFERENCE Dynamic Model of a Badminton Stroke M. Kwan* and J. Rasmussen Department of Mechanical Engineering, Aalborg University, 922 Aalborg East, Denmark Phone: +45 994 9317 / Fax: +45 9815

More information

Introduction to Continuous Systems. Continuous Systems. Strings, Torsional Rods and Beams.

Introduction to Continuous Systems. Continuous Systems. Strings, Torsional Rods and Beams. Outline of Continuous Systems. Introduction to Continuous Systems. Continuous Systems. Strings, Torsional Rods and Beams. Vibrations of Flexible Strings. Torsional Vibration of Rods. Bernoulli-Euler Beams.

More information

Advanced Vibrations. Distributed-Parameter Systems: Exact Solutions (Lecture 10) By: H. Ahmadian

Advanced Vibrations. Distributed-Parameter Systems: Exact Solutions (Lecture 10) By: H. Ahmadian Advanced Vibrations Distributed-Parameter Systems: Exact Solutions (Lecture 10) By: H. Ahmadian ahmadian@iust.ac.ir Distributed-Parameter Systems: Exact Solutions Relation between Discrete and Distributed

More information

FREE VIBRATION ANALYSIS OF THIN CYLINDRICAL SHELLS SUBJECTED TO INTERNAL PRESSURE AND FINITE ELEMENT ANALYSIS

FREE VIBRATION ANALYSIS OF THIN CYLINDRICAL SHELLS SUBJECTED TO INTERNAL PRESSURE AND FINITE ELEMENT ANALYSIS FREE VIBRATION ANALYSIS OF THIN CYLINDRICAL SHELLS SUBJECTED TO INTERNAL PRESSURE AND FINITE ELEMENT ANALYSIS J. Kandasamy 1, M. Madhavi 2, N. Haritha 3 1 Corresponding author Department of Mechanical

More information

ScienceDirect. The Stability of a Precessing and Nutating Viscoelastic Beam with a Tip Mass

ScienceDirect. The Stability of a Precessing and Nutating Viscoelastic Beam with a Tip Mass Available online at www.sciencedirect.com ScienceDirect Procedia Engineering 144 (2016 ) 68 76 12th International Conference on Vibration Problems, ICOVP 2015 The Stability of a Precessing and Nutating

More information

0000. Finite element modeling of a wind turbine blade

0000. Finite element modeling of a wind turbine blade ArticleID: 16033; Draft date: 2015-07-27 0000. Finite element modeling of a wind turbine blade Mohammad Sheibani 1, Ali Akbar Akbari 2 Department of Mechanical Engineering, Ferdowsi University of Mashhad,

More information

CO-ROTATIONAL DYNAMIC FORMULATION FOR 2D BEAMS

CO-ROTATIONAL DYNAMIC FORMULATION FOR 2D BEAMS COMPDYN 011 ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering M. Papadrakakis, M. Fragiadakis, V. Plevris (eds.) Corfu, Greece, 5-8 May 011 CO-ROTATIONAL

More information

EFFECTS OF PRETWIST AND PRESETTING ANGLES ON FREE VIBRATION OF ELASTICALLY TAILORED ROTATING THIN-WALLED BEAMS

EFFECTS OF PRETWIST AND PRESETTING ANGLES ON FREE VIBRATION OF ELASTICALLY TAILORED ROTATING THIN-WALLED BEAMS ICAS 2002 CONGRESS EFFECTS OF PRETWIST AND PRESETTING ANGLES ON FREE VIBRATION OF ELASTICALLY TAILORED ROTATING THIN-WALLED BEAMS S-Y Oh, L. Librescu and O. Song Virginia Polytechnic Institute and State

More information

Shafts: Torsion of Circular Shafts Reading: Crandall, Dahl and Lardner 6.2, 6.3

Shafts: Torsion of Circular Shafts Reading: Crandall, Dahl and Lardner 6.2, 6.3 M9 Shafts: Torsion of Circular Shafts Reading: Crandall, Dahl and Lardner 6., 6.3 A shaft is a structural member which is long and slender and subject to a torque (moment) acting about its long axis. We

More information

Mechanics of Inflatable Fabric Beams

Mechanics of Inflatable Fabric Beams Copyright c 2008 ICCES ICCES, vol.5, no.2, pp.93-98 Mechanics of Inflatable Fabric Beams C. Wielgosz 1,J.C.Thomas 1,A.LeVan 1 Summary In this paper we present a summary of the behaviour of inflatable fabric

More information

Analytical Strip Method for Thin Isotropic Cylindrical Shells

Analytical Strip Method for Thin Isotropic Cylindrical Shells IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) e-issn: 2278-1684,p-ISSN: 2320-334X, Volume 14, Issue 4 Ver. III (Jul. Aug. 2017), PP 24-38 www.iosrjournals.org Analytical Strip Method for

More information

CHAPTER THREE SYMMETRIC BENDING OF CIRCLE PLATES

CHAPTER THREE SYMMETRIC BENDING OF CIRCLE PLATES CHAPTER THREE SYMMETRIC BENDING OF CIRCLE PLATES * Governing equations in beam and plate bending ** Solution by superposition 1.1 From Beam Bending to Plate Bending 1.2 Governing Equations For Symmetric

More information

MECHANICS OF MATERIALS

MECHANICS OF MATERIALS 2009 The McGraw-Hill Companies, Inc. All rights reserved. Fifth SI Edition CHAPTER 3 MECHANICS OF MATERIALS Ferdinand P. Beer E. Russell Johnston, Jr. John T. DeWolf David F. Mazurek Torsion Lecture Notes:

More information

The Design of a Multiple Degree of Freedom Flexure Stage with Tunable Dynamics for Milling Experimentation

The Design of a Multiple Degree of Freedom Flexure Stage with Tunable Dynamics for Milling Experimentation The Design of a Multiple Degree of Freedom Flexure Stage with Tunable Dynamics for Milling Experimentation Mark A. Rubeo *, Kadir Kiran *, and Tony L. Schmitz The University of North Carolina at Charlotte,

More information

Finite element model for vibration analysis of pre-twisted Timoshenko beam

Finite element model for vibration analysis of pre-twisted Timoshenko beam Journal of Sound and Vibration 273 (24) 741 754 JOURNAL OF SOUND AND VIBRATION www.elsevier.com/locate/jsvi Finite element model for vibration analysis of pre-twisted Timoshenko beam B. Yardimoglu*, T.

More information

ME 475 Modal Analysis of a Tapered Beam

ME 475 Modal Analysis of a Tapered Beam ME 475 Modal Analysis of a Tapered Beam Objectives: 1. To find the natural frequencies and mode shapes of a tapered beam using FEA.. To compare the FE solution to analytical solutions of the vibratory

More information

D : SOLID MECHANICS. Q. 1 Q. 9 carry one mark each.

D : SOLID MECHANICS. Q. 1 Q. 9 carry one mark each. GTE 2016 Q. 1 Q. 9 carry one mark each. D : SOLID MECHNICS Q.1 single degree of freedom vibrating system has mass of 5 kg, stiffness of 500 N/m and damping coefficient of 100 N-s/m. To make the system

More information

DYNAMICS OF FLEXIBLE BEAMS UNDERGOING OVERALL MOTIONS

DYNAMICS OF FLEXIBLE BEAMS UNDERGOING OVERALL MOTIONS Journal of Sound and Vibration (1995) 181(), 61 78 DYNAMICS OF FEXIBE BEAMS UNDERGOING OVERA MOTIONS H. H. YOO Department of Mechanical Design and Production Engineering, Hanyang University, Haengdang-Dong

More information

Wave Motion. Chapter 14 of Essential University Physics, Richard Wolfson, 3 rd Edition

Wave Motion. Chapter 14 of Essential University Physics, Richard Wolfson, 3 rd Edition Wave Motion Chapter 14 of Essential University Physics, Richard Wolfson, 3 rd Edition 1 Waves: propagation of energy, not particles 2 Longitudinal Waves: disturbance is along the direction of wave propagation

More information

1653. Effect of cut-out on modal properties of edge cracked temperature-dependent functionally graded plates

1653. Effect of cut-out on modal properties of edge cracked temperature-dependent functionally graded plates 1653. Effect of cut-out on modal properties of edge cracked temperature-dependent functionally graded plates A. Shahrjerdi 1, T. Ezzati 2 1 Department of Mechanical Engineering, Malayer University, Malayer

More information

Dynamics and control of mechanical systems

Dynamics and control of mechanical systems Dynamics and control of mechanical systems Date Day 1 (03/05) - 05/05 Day 2 (07/05) Day 3 (09/05) Day 4 (11/05) Day 5 (14/05) Day 6 (16/05) Content Review of the basics of mechanics. Kinematics of rigid

More information

MODIFIED HYPERBOLIC SHEAR DEFORMATION THEORY FOR STATIC FLEXURE ANALYSIS OF THICK ISOTROPIC BEAM

MODIFIED HYPERBOLIC SHEAR DEFORMATION THEORY FOR STATIC FLEXURE ANALYSIS OF THICK ISOTROPIC BEAM MODIFIED HYPERBOLIC SHEAR DEFORMATION THEORY FOR STATIC FLEXURE ANALYSIS OF THICK ISOTROPIC BEAM S. Jasotharan * and I.R.A. Weerasekera University of Moratuwa, Moratuwa, Sri Lanka * E-Mail: jasos91@hotmail.com,

More information

Free vibration and dynamic instability analyses of doubly-tapered rotating laminated composite beams

Free vibration and dynamic instability analyses of doubly-tapered rotating laminated composite beams Free vibration and dynamic instability analyses of doubly-tapered rotating laminated composite beams Saemul Seraj A thesis in the Department of Mechanical and Industrial Engineering Presented in Partial

More information

Analysis on propulsion shafting coupled torsional-longitudinal vibration under different applied loads

Analysis on propulsion shafting coupled torsional-longitudinal vibration under different applied loads Analysis on propulsion shafting coupled torsional-longitudinal vibration under different applied loads Qianwen HUANG 1 ; Jia LIU 1 ; Cong ZHANG 1,2 ; inping YAN 1,2 1 Reliability Engineering Institute,

More information

Analysis of thin plate structures using the absolute nodal coordinate formulation

Analysis of thin plate structures using the absolute nodal coordinate formulation 345 Analysis of thin plate structures using the absolute nodal coordinate formulation K Dufva 1 and A A Shabana 2 1 Department of Mechanical Engineering, Lappeenranta University of echnology, Lappeenranta,

More information

A consistent dynamic finite element formulation for a pipe using Euler parameters

A consistent dynamic finite element formulation for a pipe using Euler parameters 111 A consistent dynamic finite element formulation for a pipe using Euler parameters Ara Arabyan and Yaqun Jiang Department of Aerospace and Mechanical Engineering, University of Arizona, Tucson, AZ 85721,

More information

Measurement Techniques for Engineers. Motion and Vibration Measurement

Measurement Techniques for Engineers. Motion and Vibration Measurement Measurement Techniques for Engineers Motion and Vibration Measurement Introduction Quantities that may need to be measured are velocity, acceleration and vibration amplitude Quantities useful in predicting

More information

NONLINEAR ANALYSIS OF A FUNCTIONALLY GRADED BEAM RESTING ON THE ELASTIC NONLINEAR FOUNDATION

NONLINEAR ANALYSIS OF A FUNCTIONALLY GRADED BEAM RESTING ON THE ELASTIC NONLINEAR FOUNDATION Journal of Theoretical and Applied Mechanics, Sofia, 2014, vol. 44, No. 2, pp. 71 82 NONLINEAR ANALYSIS OF A FUNCTIONALLY GRADED BEAM RESTING ON THE ELASTIC NONLINEAR FOUNDATION M. Arefi Department of

More information

A Study on the Tube of Integral Propeller Shaft for the Rear-wheel Drive Automobile Using Carbon Composite Fiber

A Study on the Tube of Integral Propeller Shaft for the Rear-wheel Drive Automobile Using Carbon Composite Fiber A Study on the Tube of Integral Propeller Shaft for the Rear-wheel Drive Automobile Using Carbon Composite Fiber Kibong Han Mechatronics Department, Jungwon University, 85 Munmu-ro, Goesan-gun, South Korea.

More information

3 2 6 Solve the initial value problem u ( t) 3. a- If A has eigenvalues λ =, λ = 1 and corresponding eigenvectors 1

3 2 6 Solve the initial value problem u ( t) 3. a- If A has eigenvalues λ =, λ = 1 and corresponding eigenvectors 1 Math Problem a- If A has eigenvalues λ =, λ = 1 and corresponding eigenvectors 1 3 6 Solve the initial value problem u ( t) = Au( t) with u (0) =. 3 1 u 1 =, u 1 3 = b- True or false and why 1. if A is

More information

SAMCEF For ROTORS. Chapter 1 : Physical Aspects of rotor dynamics. This document is the property of SAMTECH S.A. MEF A, Page 1

SAMCEF For ROTORS. Chapter 1 : Physical Aspects of rotor dynamics. This document is the property of SAMTECH S.A. MEF A, Page 1 SAMCEF For ROTORS Chapter 1 : Physical Aspects of rotor dynamics This document is the property of SAMTECH S.A. MEF 101-01-A, Page 1 Table of Contents rotor dynamics Introduction Rotating parts Gyroscopic

More information

Table of Contents. Preface... 13

Table of Contents. Preface... 13 Table of Contents Preface... 13 Chapter 1. Vibrations of Continuous Elastic Solid Media... 17 1.1. Objective of the chapter... 17 1.2. Equations of motion and boundary conditions of continuous media...

More information

MAAE 2202 A. Come to the PASS workshop with your mock exam complete. During the workshop you can work with other students to review your work.

MAAE 2202 A. Come to the PASS workshop with your mock exam complete. During the workshop you can work with other students to review your work. It is most beneficial to you to write this mock final exam UNDER EXAM CONDITIONS. This means: Complete the exam in 3 hours. Work on your own. Keep your textbook closed. Attempt every question. After the

More information

Manipulator Dynamics (1) Read Chapter 6

Manipulator Dynamics (1) Read Chapter 6 Manipulator Dynamics (1) Read Capter 6 Wat is dynamics? Study te force (torque) required to cause te motion of robots just like engine power required to drive a automobile Most familiar formula: f = ma

More information

ROTATING RING. Volume of small element = Rdθbt if weight density of ring = ρ weight of small element = ρrbtdθ. Figure 1 Rotating ring

ROTATING RING. Volume of small element = Rdθbt if weight density of ring = ρ weight of small element = ρrbtdθ. Figure 1 Rotating ring ROTATIONAL STRESSES INTRODUCTION High centrifugal forces are developed in machine components rotating at a high angular speed of the order of 100 to 500 revolutions per second (rps). High centrifugal force

More information

DYNAMIC CHARACTERSTIC ESTIMATION OF STRUCTURAL MATERIALS BY MODAL ANALYSIS USING ANSYS

DYNAMIC CHARACTERSTIC ESTIMATION OF STRUCTURAL MATERIALS BY MODAL ANALYSIS USING ANSYS DYNAMIC CHARACTERSTIC ESTIMATION OF STRUCTURAL MATERIALS BY MODAL ANALYSIS USING ANSYS Syed Ayesha Yasmeen 1, Anatha Abhijit P 2, Dr.D.Srinivasa Rao 3 1, 2 Graduate Students, 3 Professor, Department of

More information

Rotational Motion. Chapter 10 of Essential University Physics, Richard Wolfson, 3 rd Edition

Rotational Motion. Chapter 10 of Essential University Physics, Richard Wolfson, 3 rd Edition Rotational Motion Chapter 10 of Essential University Physics, Richard Wolfson, 3 rd Edition 1 We ll look for a way to describe the combined (rotational) motion 2 Angle Measurements θθ ss rr rrrrrrrrrrrrrr

More information

202 Index. failure, 26 field equation, 122 force, 1

202 Index. failure, 26 field equation, 122 force, 1 Index acceleration, 12, 161 admissible function, 155 admissible stress, 32 Airy's stress function, 122, 124 d'alembert's principle, 165, 167, 177 amplitude, 171 analogy, 76 anisotropic material, 20 aperiodic

More information

M. Vable Mechanics of Materials: Chapter 5. Torsion of Shafts

M. Vable Mechanics of Materials: Chapter 5. Torsion of Shafts Torsion of Shafts Shafts are structural members with length significantly greater than the largest cross-sectional dimension used in transmitting torque from one plane to another. Learning objectives Understand

More information

VIBRATION ANALYSIS OF EULER AND TIMOSHENKO BEAMS USING DIFFERENTIAL TRANSFORMATION METHOD

VIBRATION ANALYSIS OF EULER AND TIMOSHENKO BEAMS USING DIFFERENTIAL TRANSFORMATION METHOD VIBRATION ANALYSIS OF EULER AND TIMOSHENKO BEAMS USING DIFFERENTIAL TRANSFORMATION METHOD Dona Varghese 1, M.G Rajendran 2 1 P G student, School of Civil Engineering, 2 Professor, School of Civil Engineering

More information

Correspondence should be addressed to Kuo Mo Hsiao,

Correspondence should be addressed to Kuo Mo Hsiao, Mathematical Problems in Engineering Volume 2, Article ID 4655, 29 pages doi:.55/2/4655 Research Article A Corotational Finite Element Method Combined with Floating Frame Method for Large Steady-State

More information

Vibration of Thin Beams by PIM and RPIM methods. *B. Kanber¹, and O. M. Tufik 1

Vibration of Thin Beams by PIM and RPIM methods. *B. Kanber¹, and O. M. Tufik 1 APCOM & ISCM -4 th December, 23, Singapore Vibration of Thin Beams by PIM and RPIM methods *B. Kanber¹, and O. M. Tufik Mechanical Engineering Department, University of Gaziantep, Turkey. *Corresponding

More information

PES Institute of Technology

PES Institute of Technology PES Institute of Technology Bangalore south campus, Bangalore-5460100 Department of Mechanical Engineering Faculty name : Madhu M Date: 29/06/2012 SEM : 3 rd A SEC Subject : MECHANICS OF MATERIALS Subject

More information

Sub. Code:

Sub. Code: Important Instructions to examiners: ) The answers should be examined by key words and not as word-to-word as given in the model answer scheme. ) The model answer and the answer written by candidate may

More information

Modeling and Performance Analysis of a Flywheel Energy Storage System Prince Owusu-Ansah, 1, Hu Yefa, 1, Philip Agyeman, 1 Adam Misbawu 2

Modeling and Performance Analysis of a Flywheel Energy Storage System Prince Owusu-Ansah, 1, Hu Yefa, 1, Philip Agyeman, 1 Adam Misbawu 2 International Conference on Electromechanical Control Technology and Transportation (ICECTT 2015) Modeling and Performance Analysis of a Flywheel Energy Storage System Prince Owusu-Ansah, 1, Hu Yefa, 1,

More information

Analysis of Tensioner Induced Coupling in Serpentine Belt Drive Systems

Analysis of Tensioner Induced Coupling in Serpentine Belt Drive Systems 2008-01-1371 of Tensioner Induced Coupling in Serpentine Belt Drive Systems Copyright 2007 SAE International R. P. Neward and S. Boedo Department of Mechanical Engineering, Rochester Institute of Technology

More information

Iraq Ref. & Air. Cond. Dept/ Technical College / Kirkuk

Iraq Ref. & Air. Cond. Dept/ Technical College / Kirkuk International Journal of Scientific & Engineering Research, Volume 6, Issue 4, April-015 1678 Study the Increasing of the Cantilever Plate Stiffness by Using s Jawdat Ali Yakoob Iesam Jondi Hasan Ass.

More information

Free vibration analysis of beams by using a third-order shear deformation theory

Free vibration analysis of beams by using a third-order shear deformation theory Sādhanā Vol. 32, Part 3, June 2007, pp. 167 179. Printed in India Free vibration analysis of beams by using a third-order shear deformation theory MESUT ŞİMŞEK and TURGUT KOCTÜRK Department of Civil Engineering,

More information

Vibro-Impact Dynamics of a Piezoelectric Energy Harvester

Vibro-Impact Dynamics of a Piezoelectric Energy Harvester Proceedings of the IMAC-XXVIII February 1 4, 1, Jacksonville, Florida USA 1 Society for Experimental Mechanics Inc. Vibro-Impact Dynamics of a Piezoelectric Energy Harvester K.H. Mak *, S. McWilliam, A.A.

More information

Numerical and Analytical Approach of Thermo-Mechanical Stresses in FGM Beams

Numerical and Analytical Approach of Thermo-Mechanical Stresses in FGM Beams Numerical and Analytical Approach of Thermo-Mechanical Stresses in FGM Beams Fatemeh Farhatnia, Gholam-Ali Sharifi and Saeid Rasouli Abstract In this paper, thermo-mechanical stress distribution has been

More information

Torsion of Shafts Learning objectives

Torsion of Shafts Learning objectives Torsion of Shafts Shafts are structural members with length significantly greater than the largest cross-sectional dimension used in transmitting torque from one plane to another. Learning objectives Understand

More information

Coupled bending-bending-torsion vibration of a rotating pre-twisted beam with aerofoil cross-section and flexible root by finite element method

Coupled bending-bending-torsion vibration of a rotating pre-twisted beam with aerofoil cross-section and flexible root by finite element method Shock and Vibration 11 (24) 637 646 637 IOS Press Coupled bending-bending-torsion vibration of a rotating pre-twisted beam with aerofoil cross-section and flexible root by finite element method Bulent

More information

Free vibration and stability of axially functionally graded tapered Euler-Bernoulli beams

Free vibration and stability of axially functionally graded tapered Euler-Bernoulli beams Shock and Vibration 18 211 683 696 683 DOI 1.3233/SAV-21-589 IOS Press Free vibration and stability of axially functionally graded tapered Euler-Bernoulli beams Ahmad Shahba a,b, Reza Attarnejad a,b, and

More information

This equation of motion may be solved either by differential equation method or by graphical method as discussed below:

This equation of motion may be solved either by differential equation method or by graphical method as discussed below: 2.15. Frequency of Under Damped Forced Vibrations Consider a system consisting of spring, mass and damper as shown in Fig. 22. Let the system is acted upon by an external periodic (i.e. simple harmonic)

More information

3 Hours/100 Marks Seat No.

3 Hours/100 Marks Seat No. *17304* 17304 14115 3 Hours/100 Marks Seat No. Instructions : (1) All questions are compulsory. (2) Illustrate your answers with neat sketches wherever necessary. (3) Figures to the right indicate full

More information

The problem of transmitting a torque or rotary motion from one plane to another is frequently encountered in machine design.

The problem of transmitting a torque or rotary motion from one plane to another is frequently encountered in machine design. CHAPER ORSION ORSION orsion refers to the twisting of a structural member when it is loaded by moments/torques that produce rotation about the longitudinal axis of the member he problem of transmitting

More information

Mechanical Engineering Ph.D. Preliminary Qualifying Examination Solid Mechanics February 25, 2002

Mechanical Engineering Ph.D. Preliminary Qualifying Examination Solid Mechanics February 25, 2002 student personal identification (ID) number on each sheet. Do not write your name on any sheet. #1. A homogeneous, isotropic, linear elastic bar has rectangular cross sectional area A, modulus of elasticity

More information

Chapter 4 Analysis of a cantilever

Chapter 4 Analysis of a cantilever Chapter 4 Analysis of a cantilever Before a complex structure is studied performing a seismic analysis, the behaviour of simpler ones should be fully understood. To achieve this knowledge we will start

More information

2044. Dynamics analysis for the clamping mechanisms of a rotary inchworm piezoelectric motor

2044. Dynamics analysis for the clamping mechanisms of a rotary inchworm piezoelectric motor 2044. Dynamics analysis for the clamping mechanisms of a rotary inchworm piezoelectric motor Yongfei Gu 1, Jichun Xing 2 1, 2 School of Mechanical Engineering, Yanshan University, Qinhuangdao, China 1

More information

VIBRATION ANALYSIS OF WINGS WITH TIP-MOUNTED ENGINE

VIBRATION ANALYSIS OF WINGS WITH TIP-MOUNTED ENGINE VIBRATION ANALYSIS OF WINGS WITH TIP-MOUNTED ENGINE by Sabrina Chowdhury Undergraduate Student, Widener University, Chester, Pennsylvania. AIAA Student Member Abstract Vibration analysis was being conducted

More information

CHAPTER 4 DESIGN AND ANALYSIS OF CANTILEVER BEAM ELECTROSTATIC ACTUATORS

CHAPTER 4 DESIGN AND ANALYSIS OF CANTILEVER BEAM ELECTROSTATIC ACTUATORS 61 CHAPTER 4 DESIGN AND ANALYSIS OF CANTILEVER BEAM ELECTROSTATIC ACTUATORS 4.1 INTRODUCTION The analysis of cantilever beams of small dimensions taking into the effect of fringing fields is studied and

More information

Radiation. Lecture40: Electromagnetic Theory. Professor D. K. Ghosh, Physics Department, I.I.T., Bombay

Radiation. Lecture40: Electromagnetic Theory. Professor D. K. Ghosh, Physics Department, I.I.T., Bombay Radiation Zone Approximation We had seen that the expression for the vector potential for a localized cuent distribution is given by AA (xx, tt) = μμ 4ππ ee iiiiii dd xx eeiiii xx xx xx xx JJ (xx ) In

More information

Members Subjected to Torsional Loads

Members Subjected to Torsional Loads Members Subjected to Torsional Loads Torsion of circular shafts Definition of Torsion: Consider a shaft rigidly clamped at one end and twisted at the other end by a torque T = F.d applied in a plane perpendicular

More information

1859. Forced transverse vibration analysis of a Rayleigh double-beam system with a Pasternak middle layer subjected to compressive axial load

1859. Forced transverse vibration analysis of a Rayleigh double-beam system with a Pasternak middle layer subjected to compressive axial load 1859. Forced transverse vibration analysis of a Rayleigh double-beam system with a Pasternak middle layer subjected to compressive axial load Nader Mohammadi 1, Mehrdad Nasirshoaibi 2 Department of Mechanical

More information

Comb resonator design (2)

Comb resonator design (2) Lecture 6: Comb resonator design () -Intro Intro. to Mechanics of Materials School of Electrical l Engineering i and Computer Science, Seoul National University Nano/Micro Systems & Controls Laboratory

More information

STRESS STRAIN AND DEFORMATION OF SOLIDS, STATES OF STRESS

STRESS STRAIN AND DEFORMATION OF SOLIDS, STATES OF STRESS 1 UNIT I STRESS STRAIN AND DEFORMATION OF SOLIDS, STATES OF STRESS 1. Define: Stress When an external force acts on a body, it undergoes deformation. At the same time the body resists deformation. The

More information

Application of piezoelectric actuators to active control of composite spherical caps

Application of piezoelectric actuators to active control of composite spherical caps Smart Mater. Struct. 8 (1999 18. Printed in the UK PII: S964-176(991661-4 Application of piezoelectric actuators to active control of composite spherical caps Victor Birman, Gareth J Knowles and John J

More information

The Effect of the Shaft Diameter and Torsional Stiffness on the Whirling Speed of the Ship Propeller Shafting System

The Effect of the Shaft Diameter and Torsional Stiffness on the Whirling Speed of the Ship Propeller Shafting System Journal of Mechanical Design and Vibration, 2017, Vol. 5, No. 1, 37-42 Available online at http://pubs.sciepub.com/jmdv/5/1/5 Science and Education Publishing DOI:10.12691/jmdv-5-1-5 The Effect of the

More information

142. Determination of reduced mass and stiffness of flexural vibrating cantilever beam

142. Determination of reduced mass and stiffness of flexural vibrating cantilever beam 142. Determination of reduced mass and stiffness of flexural vibrating cantilever beam Tamerlan Omarov 1, Kuralay Tulegenova 2, Yerulan Bekenov 3, Gulnara Abdraimova 4, Algazy Zhauyt 5, Muslimzhan Ibadullayev

More information

Fully Comprehensive Geometrically Non-Linear Dynamic Analysis of Multi-Body Beam Systems with Elastic Couplings

Fully Comprehensive Geometrically Non-Linear Dynamic Analysis of Multi-Body Beam Systems with Elastic Couplings 13 th National Conference on Mechanisms and Machines (NaCoMM7), IISc, Bangalore, India. December 1-13, 7 NaCoMM-7-96 Fully Comprehensive Geometrically Non-Linear Dynamic Analysis of Multi-Body Beam Systems

More information

STATIC RESONANCE IN ROTATING NANOBARS. 1. Introduction

STATIC RESONANCE IN ROTATING NANOBARS. 1. Introduction JOURNAL OF THEORETICAL AND APPLIED MECHANICS 56, 3, pp. 887-891, Warsaw 2018 DOI: 10.15632/jtam-pl.56.3.887 SHORT RESEARCH COMMUNICATION STATIC RESONANCE IN ROTATING NANOBARS Uǧur Güven Yildiz Technical

More information

Regression-Based Neural Network Simulation for Vibration Frequencies of the Rotating Blade

Regression-Based Neural Network Simulation for Vibration Frequencies of the Rotating Blade Regression-Based Neural Network Simulation for Vibration Frequencies of the Rotating Blade Atma Sahu and S. Chakravarty Abstract The aim of this paper is to demonstrate the use of regression-based neural

More information

Free vibration analysis of elastically connected multiple-beams with general boundary conditions using improved Fourier series method

Free vibration analysis of elastically connected multiple-beams with general boundary conditions using improved Fourier series method Free vibration analysis of elastically connected multiple-beams with general boundary conditions using improved Fourier series method Jingtao DU*; Deshui XU; Yufei ZHANG; Tiejun YANG; Zhigang LIU College

More information

Vibration analysis of tapered rotating composite beams using the hierarchical finite element

Vibration analysis of tapered rotating composite beams using the hierarchical finite element Applied and Computational Mechanics 4 (1) 157 17 Vibration analysis of tapered rotating composite beams using the hierarchical finite element R. Ghayour a, M. Ghayour a,, S. Ziaei-Rad a a Department of

More information

4. SHAFTS. A shaft is an element used to transmit power and torque, and it can support

4. SHAFTS. A shaft is an element used to transmit power and torque, and it can support 4. SHAFTS A shaft is an element used to transmit power and torque, and it can support reverse bending (fatigue). Most shafts have circular cross sections, either solid or tubular. The difference between

More information

BEAM DEFLECTION THE ELASTIC CURVE

BEAM DEFLECTION THE ELASTIC CURVE BEAM DEFLECTION Samantha Ramirez THE ELASTIC CURVE The deflection diagram of the longitudinal axis that passes through the centroid of each cross-sectional area of a beam. Supports that apply a moment

More information

Free and forced vibration analysis of FG beam considering temperature dependency of material properties

Free and forced vibration analysis of FG beam considering temperature dependency of material properties Journal of Mechanical Science and Technology 25 (1) (2011) 69~80 wwwspringerlinkcom/content/1738-494x DOI 101007/s12206-010-1015-y Free and forced vibration analysis of FG beam considering temperature

More information

The New Boundary Condition Effect on The Free Vibration Analysis of Micro-beams Based on The Modified Couple Stress Theory

The New Boundary Condition Effect on The Free Vibration Analysis of Micro-beams Based on The Modified Couple Stress Theory International Research Journal of Applied and Basic Sciences 2015 Available online at www.irjabs.com ISSN 2251-838X / Vol, 9 (3): 274-279 Science Explorer Publications The New Boundary Condition Effect

More information

Simulation of Geometrical Cross-Section for Practical Purposes

Simulation of Geometrical Cross-Section for Practical Purposes Simulation of Geometrical Cross-Section for Practical Purposes Bhasker R.S. 1, Prasad R. K. 2, Kumar V. 3, Prasad P. 4 123 Department of Mechanical Engineering, R.D. Engineering College, Ghaziabad, UP,

More information

DYNAMICS OF A SPINNING MEMBRANE

DYNAMICS OF A SPINNING MEMBRANE Preprint AAS 1-601 DYNAMICS OF A SPINNING MEMBRANE Jer-Nan Juang Chung-Han Hung and William K. Wilkie INTRODUCTION A novel approach is introduced to conduct dynamic analysis and system identification of

More information

Chapter 5 Torsion STRUCTURAL MECHANICS: CE203. Notes are based on Mechanics of Materials: by R. C. Hibbeler, 7th Edition, Pearson

Chapter 5 Torsion STRUCTURAL MECHANICS: CE203. Notes are based on Mechanics of Materials: by R. C. Hibbeler, 7th Edition, Pearson STRUCTURAL MECHANICS: CE203 Chapter 5 Torsion Notes are based on Mechanics of Materials: by R. C. Hibbeler, 7th Edition, Pearson Dr B. Achour & Dr Eng. K. El-kashif Civil Engineering Department, University

More information