Chapter 10 Solutions

Size: px
Start display at page:

Download "Chapter 10 Solutions"

Transcription

1 Chapter 0 Solutions 0. (a) α ω ω i t.0 rad/s 4.00 rad/s 3.00 s θ ω i t + αt (4.00 rad/s )(3.00 s) 8.0 rad 0. (a) ω ω π rad 365 days π rad 7.3 days *0.3 ω i 000 rad/s α 80.0 rad/s day 4 h day 4 h h 3600 s rad/s h 3600 s rad/s (a) ω ω i + αt [000 (80.0)(0.0)] 00 rad/s 0 ω i + αt t ω i α s 0.4 (a) Let ω h and ω m be the angular speeds of the hour hand and minute hand, so that π rad ω h h π 6 rad/h and ω m π rad/h Then if θ h and θ m are the angular positions of the hour hand and minute hand with respect to the o'clock position, we have θ h ω h t and θ m ω m t For the two hands to coincide, we need θ m θ h + π n, where n is a positive integer. Therefore, we may write ω m t ω h t π n, or πn πn t n ω m ω h π π 6 n h 000 by Harcourt College Publishers. All rights reserved.

2 Chapter 0 Solutions Construct the following table: n t n (h) time (h:min:s) :00:00.09 :05:7.8 :0: :6: :: :7: :3: :38: :43: :49: :54:33 Let θ s and ω s be the angular position and angular speed of the second hand, then ω s π rad/min 0π rad/h and θ s ω s t For all three hands to coincide, we need θ s θ m + πk (k is any positive integer) at any of the times given above. That is, we need ω s t n ω m t n πk, or k ω s ω m π t n 8 π n (3)(4)(59)n to be an integer. This is possible only for n 0 or. Therefore, all three hands coincide only when straight up at o'clock. 0.5 ω i 00 rev.00 min.00 min π rad 60.0 s.00 rev 0π 3 rad/s, ω f 0 (a) t ω f ω i α 0 0π/3.00 s 5.4 s θ ω t ω f + ω i t 0π 6 rad/s 0π s 7.4 rad 6 *0.6 ω i 3600 rev/min rad/s θ 50.0 rev rad and ω f 0 ω f ω i + αθ 0 ( rad/s) + α(3.4 0 rad) α.6 0 rad/s 000 by Harcourt College Publishers. All rights reserved.

3 Chapter 0 Solutions (a) θ t rad ω t 0 dθ t dt t rad/s t 0 α t 0 dω 4.00 rad/s dt t 0 θ t 3.00 s rad ω t 3.00 s dθ t dt t 3.00 s.0 rad/s t 3.00s α t 3.00 s dω 4.00 rad/s dt t 3.00s *0.8 ω 5.00 rev/s 0.0π rad/s We will break the motion into two stages: () an acceleration period and () a deceleration period. While speeding up, θ ω t While slowing down, π rad/s (8.00 s) 40.0π rad θ 0.0π rad/s + 0 ω t (.0 s) 60.0π rad So, θ τotal θ + θ 00π rad 50.0 rev 0.9 θ θ i ω i t + α t and ω ω i + α t are two equations in two unknowns ω i and α. ω i ω α t θ θ i (ω α t)t + α t ωt α t 37.0 rev π rad rev (98.0 rad/s)(3.00 s) α (3.00 s) 3 rad 94 rad (4.50 s )α 000 by Harcourt College Publishers. All rights reserved.

4 4 Chapter 0 Solutions α 6.5 rad 4.50 s 3.7 rad/s 000 by Harcourt College Publishers. All rights reserved.

5 Chapter 0 Solutions 5 *0.0 (a) ω θ t rev π rad day s rad/s t θ ω 07 π rad rad/s s (48 min) *0. Estimate the tire s radius at 0.50 m and miles driven as 0,000 per year. θ s r mi 609 m 0.50 m mi rad yr θ rad rev yr π rad rev.0 07 yr or ~0 7 rev yr *0. Main Rotor: v rω (3.80 m) 450 rev π rad min min rev 60 s 79 m/s v sound v 79 m s 343 m/s 0.5v sound Tail Rotor: v rω (0.50 m) 438 rev π rad min min rev 60 s m/s v sound v m s 343 m/s 0.644v sound 0.3 (a) v rω; ω v r 45.0 m/s 50 m 0.80 rad/s a r v r (45.0 m/s) 50 m 8.0 m/s toward the center of track 0.4 v 36.0 km h h 0 3 m 3600 s km 0.0 m/s ω v r 0.0 m/s 0.50 m 40.0 rad/s 000 by Harcourt College Publishers. All rights reserved.

6 6 Chapter 0 Solutions 0.5 Given r.00 m, α 4.00 rad/s, ω i 0, and θ i rad (a) ω ω i + α t 0 + α t At t.00 s, ω (4.00 rad /s )(.00 s) 8.00 rad/s v rω (.00 m)(8.00 rad/s) 8.00 m/s a r rω (.00 m)(8.00 rad/s) 64.0 m/s a t rα (.00 m)(4.00 rad/s ) 4.00 m/s The magnitude of the total acceleration is: a a r + a t (64.0 m/s ) + (4.00 m/s ) 64. m/s The direction of the total acceleration vector makes an angle φ with respect to the radius to point P: a t φ tan tan a 4.00 r (c) θ θ i + ω i t + α t (.00 rad) + (4.00 rad/s )(.00 s) 9.00 rad 0.6 (a) ω v r 5.0 m/s.00 m 5.0 rad/s ω f ω i + α( θ) α ω f ω i ( θ) (5.0 rad/s) rad/s [(.5 rev)(π rad/rev)] (c) t ω α 5.0 rad/s 39.8 rad/s 0.68 s 0.7 (a) s v t (.0 m/s)(9.00 s) 99.0 m θ s r 99.0 m 0.90 m 34 rad 54.3 rev ω v r.0 m/s 0.90 m 75.9 rad/s. rev/s 000 by Harcourt College Publishers. All rights reserved.

7 Chapter 0 Solutions K A + U A K p + U p (6.00) v p a r P v p 58.8 m /s Radial acceleration at P, g a r v p R 9.4 m/s Tangential acceleration at P, a t g 9.80 m/s 0.9 (a) ω πf π rad 00 rev 60.0 rev/s 6 rad/s v ωr (6 rad/s)( m) 3.77 m/s (c) a r ω r (6) ( ) 60 m/s.6 km/s (d) s θr ω t r (6 rad/s)(.00 s)( m) 0. m 0.0 Just before it starts to skid, F r ma r f mv r µ s n µ s mg µ s v rg ω r g (ω ω i)r g αθr g a tθ g µ s (.70 m/s )(π/) 9.80 m/s *0. (a) x r cos θ (3.00 m) cos (9.00 rad) (3.00 m) cos m y r sin θ (3.00 m) sin (9.00 rad) (3.00 m) sin 56.4 m r xi + yj (.73i +.4j) m This is between 90.0 and 80, so the object is in the second quadrant. The vector r makes an angle of 56 with the positive x-axis or 4.3 with the negative x-axis. 000 by Harcourt College Publishers. All rights reserved.

8 8 Chapter 0 Solutions (d) The direction of motion (i.e., the direction of the velocity vector is at from the positive x axis. The direction of the acceleration vector is at from the positive x axis. m a 56 x (c) v [(4.50 m/s) cos 46 ]i + [(4.50 m/s) sin 46 ]j v (.85i 4.0j) m/s (e) a v r (4.50 m/s) 3.00 m 6.75 m/s directed toward the center or at 336 a (6.75 m/s )(i cos j sin 336 ) (6.5i.78j) m/s (f) F ma (4.00 kg)[(6.5i.78j) m/s ] (4.6i.j) N *0. When completely rewound, the tape is a hollow cylinder with a difference between the inner and outer radii of ~ cm. Let N represent the number of revolutions through which the driving spindle turns in 30 minutes (and hence the number of layers of tape on the spool). We can determine N from: N θ π ω( t) π ( rad/s)(30 min)(60 s/min) π rad/rev 86 rev Then, thickness ~ cm N ~0 cm 0.3 m 4.00 kg, r y 3.00 m; m.00 kg, r y.00 m; m kg, r 3 y m; ω.00 rad/s about the x-axis (a) I x m r + m r + m r (4.00)(3.00) + (.00)(.00) + (3.00)(4.00) I x 9.0 kg m y K R I xω (9.0)(.00) 84 J 4.00 kg y 3.00 m v r ω (3.00)(.00) 6.00 m/s O x v r ω (.00)(.00) 4.00 m/s v 3 r 3 ω (4.00)(.00) 8.00 m/s.00 kg 3.00 kg y -.00 m y m 000 by Harcourt College Publishers. All rights reserved.

9 Chapter 0 Solutions 9 K m v (4.00)(6.00) 7.0 J K m v (.00)(4.00) 6.0 J K 3 m 3v 3 (3.00)(8.00) 96.0 J K K + K + K J I xω 0.4 v 38.0 m/s ω 5 rad/s RATIO Iω mv 5 mr ω mv RATIO 5 ( ) (5) (38.0) (a) I j m j r j y (m) In this case, 3.00 kg kg r r r 3 r 4 r (3.00 m) + (.00 m) 3.0 m I [ 3.0 m] [ ]kg 0 3 x (m) 43 kg m K R Iω (43 kg m )(6.00 rad/s).00 kg 4.00 kg J 0.6 The moment of inertia of a thin rod about an axis through one end is I 3 ML. The total rotational kinetic energy is given as K R I hω h + I mω m, with I h m hl h 3 (60.0 kg)(.70 m) 3 46 kg m, and I m m ml m 3 (00 kg)(4.50 m) kg m 000 by Harcourt College Publishers. All rights reserved.

10 0 Chapter 0 Solutions In addition, ω h (π rad) ( h) h 3600 s rad/s, while ω m (π rad) ( h) h 3600 s rad/s. Therefore, K R (46)( ) + (675)( ) J 0.7 I Mx + m(l x) x di dx Mx m(l x) 0 (for an extremum) ml x M + m M L m d I dx m + M; therefore I is minimum when ml the axis of rotation passes through x M + m x L x which is also the center of mass of the system. The moment of inertia about an axis passing through x is I CM M ml + m m M + m M + m where µ Mm M + m L µl Mm M + m L 0.8 We assume the rods are thin, with radius much less than L. Call the junction of the rods the origin of coordinates, and the axis of rotation the z-axis. For the rod along the y-axis, I 3 ml from the table. For the rod parallel to the z-axis, the parallel-axis theorem gives I mr + m L 4 ml axis of rotation 000 by Harcourt College Publishers. All rights reserved.

11 Chapter 0 Solutions In the rod along the x-axis, the bit of material between x and x + dx has mass (m/l)dx and is at distance r x + (L/) from the axis of rotation. The total rotational inertia is: I total 3 ml + 4 ml + L/ L/ (x + L /4)(m/L)dx 7 ml + m L x 3 3 L/ L/ + ml 4 x L/ L/ 7 ml + ml + ml 4 ml *0.9 Treat the tire as consisting of three parts. The two sidewalls are each treated as a hollow cylinder of inner radius 6.5 cm, outer radius 30.5 cm, and height cm. The tread region is treated as a hollow cylinder of inner radius 30.5 cm, outer radius 33.0 cm, and height 0.0 cm. Use I m(r + R ) for the moment of inertia of a hollow cylinder. Sidewall: m π [(0.305 m) (0.65 m) ] ( m)( kg/m 3 ).44 kg I side (.44 kg) [(0.65 m) + (0.305 m) ] kg m Tread: m π [(0.330 m) (0.305 m) ] (0.00 m)( kg/m 3 ).0 kg I tread (.0 kg) [(0.330 m) + (0.305 m) ]. kg m Entire Tire: I total I side + I tread ( kg m ) +. kg m.8 kg m 0.30 (a) I I CM + MD MR + MR 3 MR I I CM + MD 5 MR + MR 7 5 MR 000 by Harcourt College Publishers. All rights reserved.

12 Chapter 0 Solutions *0.3 Model your body as a cylinder of mass 60.0 kg and circumference 75.0 cm. Then its radius is m π 0.0 m and its moment of inertia is MR (60.0 kg)(0.0 m) 0.43 kg m ~ 0 0 kg m kg m 0.3 τ 0 mg(3r) Tr T Mg sin Mg sin 45.0 T m T 3g 530g 3g 77 kg 500 kg(g) sin 45.0 (530)(9.80) N 3r r 500 kg m θ by Harcourt College Publishers. All rights reserved.

13 Chapter 0 Solutions τ (0.00 m)(.0 N) (0.50 m)(9.00 N) (0.50 m)(0.0 N) 0.0 N 3.55 N m The thirty-degree angle is unnecessary information a O.0 N b 9.00 N Goal Solution G: By simply examining the magnitudes of the forces and their respective lever arms, it appears that the wheel will rotate clockwise, and the net torque appears to be about 5 Nm. O: To find the net torque, we simply add the individual torques, remembering to apply the convention that a torque producing clockwise rotation is negative and a counterclockwise torque is positive. A: τ Fd τ (.0 N)(0.00 m) (0.0 N)(0.50 m) (9.00 N)(0.50 m) τ 3.55 N m The minus sign means perpendicularly into the plane of the paper, or it means clockwise. L: The resulting torque has a reasonable magnitude and produces clockwise rotation as expected. Note that the 30 angle was not required for the solution since each force acted perpendicular to its lever arm. The 0-N force is to the right, but its torque is negative that is, clockwise, just like the torque of the downward 9-N force Resolve the 00 N force into components perpendicular to and parallel to the rod, as F par (00 N) cos N.00 m and 0.0 F perp (00 N) sin N 00 N Torque of F par 0 since its line of action passes through the pivot point. Torque of F perp is τ (83.9 N)(.00 m) 68 N m (clockwise) 000 by Harcourt College Publishers. All rights reserved.

14 4 Chapter 0 Solutions *0.35 The normal force exerted by the ground on each wheel is n mg 4 (500 kg)(9.80 m/s ) 4 The torque of friction can be as large as 3680 N τ max f max r (µ s n)r (0.800)(3680 N)(0.300 m) 88 N m The torque of the axle on the wheel can be equally as large as the light wheel starts to turn without slipping. *0.36 We calculated the maximum torque that can be applied without skidding in Problem 35 to be 88 N m. This same torque is to be applied by the frictional force, f, between the brake pad and the rotor for this wheel. Since the wheel is slipping against the brake pad, we use the coefficient of kinetic friction to calculate the normal force. τ fr (µ k n)r, so n τ µ k r 88 N m (0.500)(0.0 m) N 8.0 kn 0.37 m kg F N (a) τ rf (30.0 m)(0.800 N) 4.0 N m α τ I rf mr 4.0 (0.750)(30.0) rad/s (c) a T α r (0.0356)(30.0).07 m/s *0.38 τ 36.0 N m Iα ω f ω i + α t 0.0 rad/s 0 + α(6.00 s) α rad/s.67 rad/s (a) I τ α 36.0 N m.67 rad/s.6 kg m ω f ω i + α t α(60.0) α 0.67 rad/s τ Iα (.6 kg m)(0.67 rad/s ) 3.60 N m 000 by Harcourt College Publishers. All rights reserved.

15 Chapter 0 Solutions 5 (c) Number of revolutions θ θ i + ω i t + α t During first 6.00 s θ (.67)(6.00) 30. rad During next 60.0 s θ 0.0(60.0) (0.67)(60.0) 99 rad θ total (39 rad) rev π rad 0.39 For m : F y ma y +n m g rev T I, R n m g 9.6 N m f k µ k n 7.06 N T F x ma x 7.06 N + T (.00 kg)a () m For the pulley τ Iα t T R + T R a MR R T + T (0.0 kg) a T + T (5.00 kg)a () n T n f k T T f k n T m g Mg m g 000 by Harcourt College Publishers. All rights reserved.

16 6 Chapter 0 Solutions For m : +n m g cos θ 0 n 6.00 kg(9.80 m/s ) cos N f k µ k n 8.3 N 8.3 N T + m g sin θ m a 8.3 N T N (6.00 kg)a (3) (a) Add equations () () and (3): 7.06 N 8.3 N N (3.0 kg)a a 4.0 N 3.0 kg m/s T.00 kg (0.309 m/s ) N 7.67 N T 7.67 N kg(0.309 m/s ) 9. N 0.40 I mr (00 kg)(0.500 m).5 kg m ω i 50.0 rev/min 5.4 rad/s m n 70.0 N α ω f ω i t rad/s 6.00 s rad/s f µn τ Iα (.5 kg m )( rad/s ) 0.9 N m The magnitude of the torque is given by fr 0.9 N m, where f is the force of friction. Therefore, f 0.9 N m m, and f µ k n yields µ k f n.8 N 70.0 N I MR.80 kg(0.30 m) 0.84 kg m τ Iα (a) F a ( m) 0 N(0.30 m) 0.84 kg m (4.50 rad/s ) F a (0.89 N m N m) m 87 N F b (.80 0 m) 38.4 N m 0.89 N m F b.40 kn 000 by Harcourt College Publishers. All rights reserved.

17 Chapter 0 Solutions We assume the rod is thin. For the compound object I 3 M rodl + 5 M ballr + M ball D I 3.0 kg (0.40 m) kg( m) kg(0.80 m) I.60 kg m (a) K f + U f K i + U i + E Iω M rod g(l/) + M ball g(l + R) + 0 (.60 kg m ) ω.0 kg(9.80 m/s )(0.0 m) kg(9.80 m/s )(0.80 m) (.60 kg m ) ω 56.3 J ω 8.38 rad/s (c) v rω (0.80 m)8.38 rad/s.35 m/s (d) v v i + a(y y i ) v 0 + (9.80 m/s )(0.80 m).34 m/s The speed it attains in swinging is greater by.35/ times 0.43 Choose the zero gravitational potential energy at the level where the masses pass. K f + U gf K i + U gi + E m v + m v + Iω 0 + m gh i + m gh i + 0 ( ) v + v (3.00)R 5.0(9.80)(.50) + 0.0(9.80)(.50) R (6.5 kg) v 73.5 J v.36 m/s 000 by Harcourt College Publishers. All rights reserved.

18 8 Chapter 0 Solutions 0.44 Choose the zero gravitational potential energy at the level where the masses pass. K f + U gf K i + U gi + E m v + m v + Iω 0 + m gh i + m gh i + 0 (m + m ) v + v MR R m g d + m g d m + m + M v (m m )g d v (m m )gd m + m + M 0.45 (a) 50.0 T a F g TR Iα I a R I MR kg m ω 3 kg 50.0 T 5.0 TR I n T T.4 N 0.50 m a m/s v a(y i 0) 9.53 m/s 000 by Harcourt College Publishers. All rights reserved.

19 Chapter 0 Solutions 9 Use conservation of energy: (K + U) i (K + U) f mgh mv + Iω mgh mv + I v R v m + I R v mgh m + I R (50.0 N)(6.00 m) 5.0 kg (0.50) 9.53 m/s Goal Solution G: Since the rotational inertia of the reel will slow the fall of the weight, we should expect the downward acceleration to be less than g. If the reel did not rotate, the tension in the string would be equal to the weight of the object; and if the reel disappeared, the tension would be zero. Therefore, T < mg for the given problem. With similar reasoning, the final speed must be less than if the weight were to fall freely: v f < gy m/s O: We can find the acceleration and tension using the rotational form of Newton s second law. The final speed can be found from the kinematics equation stated above and from conservation of energy. Free-body diagrams will greatly assist in analyzing the forces. A: (a) Use τ Iα to find T and a. First find I for the reel, which we assume to be a uniform disk: I MR 3.00 kg (0.50 m) kg m The forces on the reel are shown, including a normal force exerted by its axle. From the diagram, we can see that the tension is the only unbalanced force causing the reel to rotate. T 6.00 m 50.0 N 000 by Harcourt College Publishers. All rights reserved.

20 0 Chapter 0 Solutions τ Iα becomes n(0) + F g (0) + T(0.50 m) ( kg m )(a/0.50 m) () where we have applied a t rα to the point of contact between string and reel. The falling weight has mass m F g g 50.0 N 9.80 m/s 5.0 kg For this mass, F y ma y becomes +T 50.0 N (5.0 kg)( a) () Note that since we have defined upwards to be positive, the minus sign shows that its acceleration is downward. We now have our two equations in the unknowns T and a for the two linked objects. Substituting T from equation () into equation (), we have: [50.0 N (5.0 kg)a](0.50 m) kg m a 0.50 m.5 N m (.8 kg m)a (0.375 kg m)a.5 N m a(.65 kg m) or a 7.57 m/s and T 50.0 N 5.0 kg(7.57 m/s ).4 N For the motion of the weight, v f v i + a(y f y i ) 0 + (7.57 m/s )(6.00 m) v f 9.53 m/s The work-energy theorem can take account of multiple objects more easily than Newton's second law. Like your bratty cousins, the work-energy theorem keeps growing between visits. Now it reads: (K + K,rot + U g + U g ) i (K + K,rot + U g + U g ) f m gy i + 0 m v f + I ω f Now note that ω v r as the string unwinds from the reel. Making substitutions: 50.0 N(6.00 m) (5.0 kg) v f + ( kg m ) v f 0.50 m 300 N m (5.0 kg) v f + (.50 kg) v f v f (300 N m) 6.60 kg 9.53 m/s L: As we should expect, both methods give the same final speed for the falling object. The acceleration is less than g, and the tension is less than the object s weight as we predicted. Now that we understand the effect of the reel s moment of inertia, this problem solution could be applied to solve other real-world pulley systems with masses that should not be ignored. 000 by Harcourt College Publishers. All rights reserved.

21 Chapter 0 Solutions 0.46 τ θ Iω (5.0 N m)(5.0 π) (0.30 kg m ) ω ω 90 rad/s 30.3 rev/s 0.47 From conservation of energy, I v r + mv mgh I v r mgh mv I mr gh v 0.48 E Iω 3000 π MR 60.0 P E t J/s J t E P J s 0.3 min J/s 0.49 (a) Find the velocity of the CM (K + U) i (K + U) f 0 + mgr Iω Pivot R ω mgr I mgr 3 mr g v CM R 4g 3R Rg 3 v L v CM 4 Rg 3 (c) v CM mgr m Rg 000 by Harcourt College Publishers. All rights reserved.

22 Chapter 0 Solutions *0.50 The moment of inertia of the cylinder is I mr (8.6 kg)(.50 m) 9.8 kg m and the angular acceleration of the merry-go-round is found as α τ I (Fr) I (50.0 N)(.50 m) (9.8 kg m ) 0.87 rad/s At t 3.00 s, we find the angular velocity ω ω i + α t ω 0 + (0.87 rad/s )(3.00 s).45 rad/s and K Iω (9.8 kg m )(.45 rad/s) 76 J 0.5 mg l sin θ 3 ml α α 3 g l sin θ a t 3 g l sin θ r Then 3 g l r > g sin θ t θ a t t θ g sinθ g for r > 3 l About /3 the length of the chimney will have a tangential acceleration greater than g sin θ. *0.5 The resistive force on each ball is R DρAv. Here v rω, where r is the radius of each ball s path. The resistive torque on each ball is τ rr, so the total resistive torque on the three ball system is τ total 3rR. The power required to maintain a constant rotation rate is P τ total ω 3rRω. This required power may be written as P τ total ω 3r [DρA(rω) ]ω (3r 3 DAω 3 )ρ With ω π rad rev 0 3 rev min min 60.0 s 000π 30.0 rad/s, P 3(0.00 m) 3 (0.600)( m )(000π/30.0 s) 3 ρ or P (0.87 m 5 /s 3 )ρ where ρ is the density of the resisting medium. 000 by Harcourt College Publishers. All rights reserved.

23 Chapter 0 Solutions 3 (a) In air, ρ.0 kg/m 3, and P (0.87 m 5 /s 3 )(.0 kg/m 3 ) 0.99 N m/s 0.99 W In water, ρ 000 kg/m 3 and P 87 W 0.53 (a) I MR (.00 kg)( m) kg m α τ I rad/s α ω t t ω α 00 π s θ αt ( rad/s)(.03 s) 64.7 rad 0.3 rev 0.54 For a spherical shell 3 dm r 3 [(4πr dr)ρ]r I di 3 (4πr ) r ρ(r)dr I R 0 3 (4πr4 ) 4..6 r R 0 3 kg m 3 dr 3 4π( ) R π( ) R5 6 I 8π 3 (03 ) R M dm R 4πr 4..6 r 0 R 03 dr 4π R 3 I MR 8π 3 (03 ) R π 0 3 R 3 R by Harcourt College Publishers. All rights reserved.

24 4 Chapter 0 Solutions I 0.330MR 000 by Harcourt College Publishers. All rights reserved.

25 Chapter 0 Solutions (a) W K Iω Iω i I(ω ω i ) where I mr (.00 kg)(0.500 m) 8.00 rad J s t ω 0 α ωr a (8.00 rad/s)(0.500 m).50 m/s.60 s (c) θ θ i + ω i t + αt ; θ i 0; ω i 0 θ αt.50 m/s m (.60 s) 6.40 rad s rθ (0.500 m)(6.40 rad) 3.0 m < 4.00 m Yes 0.56 (a) I mr (00 kg)(0.300 m) 9.00 kg m ω (000 rev/min)( min/60 s)(π rad)/ rev 05 rad/s W K Iω (9.00)(04.7) 49.3 kj (c) ω f 500 rev/min min/60 s(π rad/ rev) 5.4 rad/s K f Iω.3 kj W K.3 kj 49.3 kj 37.0 kj *0.57 α 0.0 rad/s (5.00 rad/s 3 )t dω/dt ω dω t [ t]dt 0.0t.50t ω 65.0 rad/s ω dθ dt 65.0 rad/s (0.0 rad/s )t (.50 rad/s 3 )t (a) At t 3.00 s, ω 65.0 rad/s (0.0 rad/s )(3.00 s) (.50 rad/s 3 )(9.00 s ).5 rad/s 000 by Harcourt College Publishers. All rights reserved.

26 6 Chapter 0 Solutions θ dθ t ω dt t [65.0 rad/s (0.0 rad/s )t (.50 rad/s 3 )t ]dt 0 0 o θ (65.0 rad/s)t (5.00 rad/s )t (0.833 rad/s 3 )t 3 At t 3.00 s, θ (65.0 rad/s)(3.00 s) (5.00 rad/s )9.00 s (0.833 rad/s 3 )7.0 s 3 θ 8 rad 0.58 (a) MK MR, K R MK ML, K L 3 6 (c) MK 5 MR, K R 5 y 0.59 (a) Since only conservative forces act, E 0, so K f + U f K i + U i Iω mg L, where I 3 ml L ω 3g/L pivot x τ Iα so that in the horizontal, mg L ml 3 α α 3g L (c) a x a r rω L ω 3g a y a t rα α L 3g 4 (d) Using Newton's second law, we have R x ma x 3 mg R y mg ma y or R y 4 mg 000 by Harcourt College Publishers. All rights reserved.

27 Chapter 0 Solutions The first drop has a velocity leaving the wheel given by mv i mgh, so v gh (9.80 m/s )(0.540 m) 3.5 m/s The second drop has a velocity given by v gh (9.80 m/s )(0.50 m) 3.6 m/s From ω v r, we find ω v r 3.5 m/s 0.38 m 8.53 rad/s and ω v r 3.6 m/s 0.38 m 8.9 rad/s or α ω ω θ (8.9 rad/s) (8.53 rad/s) 4π 0.3 rad/s 0.6 At the instant it comes off the wheel, the first drop has a velocity v, directed upward. The magnitude of this velocity is found from K i + U gi K f + U gf mv mgh or v gh and the angular velocity of the wheel at the instant the first drop leaves is ω v R gh R Similarly for the second drop: v gh and ω v R gh R The angular acceleration of the wheel is then α ω ω θ gh /R gh /R (π) g(h h ) πr 0.6 Work done Fs (5.57 N)(0.800 m) 4.46 J A and Work K Iω f Iω i (The last term is zero because the top starts from rest.) F Thus, 4.46 J ( kg m ) ω f A 000 by Harcourt College Publishers. All rights reserved.

28 8 Chapter 0 Solutions and from this, ω f 49 rad/s 000 by Harcourt College Publishers. All rights reserved.

29 Chapter 0 Solutions K f Mv f + Iω f : U f Mgh f 0; K i Mv i + Iω i 0 U i (Mgh) i : f µn µmg cos θ; ω v r ; h d sin θ and I mr (a) E E f E i or fd K f + U f K i U i fd Mv f + Iω f Mgh (µmg cos θ)d Mv + (mr /)(v /r )/ Mgd sin θ M + m v Mgd v d 4gd v Mgd sin θ (µmg cos θ)d or (sin θ µ cos θ) (m/) + M M (m + M) (sin θ µ cos θ) / v v i as, v d ad a v d d g M (sin θ µ cos θ) m + M 0.64 (a) E 5 MR (ω ) E 5 ( )( ) π J de dt dt d 5 MR π T 5 MR (π) ( T 3 ) dt dt π 5 MR T dt T dt ( J) s s s de dt J/day (86400 s/day) 000 by Harcourt College Publishers. All rights reserved.

30 30 Chapter 0 Solutions 0.65 θ ωt t θ ω (3.0 /360 ) rev 900 rev/60 s v m 39 m/s s s v θ 3 ω 0.66 (a) Each spoke counts as a thin rod pivoted at one end. d I MR + n mr 3 By the parallel-axis theorem, I MR + nmr 3 + (M + nm)r MR + 4 nmr 3 *0.67 Every particle in the door could be slid straight down into a high-density rod across its bottom, without changing the particle s distance from the rotation axis of the door. Thus, a rod m long with mass 3.0 kg, pivoted about one end, has the same rotational inertia as the door: I 3 ML 3 (3.0 kg)(0.870 m) 5.80 kg m The height of the door is unnecessary data. 000 by Harcourt College Publishers. All rights reserved.

31 Chapter 0 Solutions τ f will oppose the torque causing the motion: τ Iα TR τ f τ f TR Iα () M Now find T, I and α in given or known terms and substitute into equation () F y T mg ma then T m(g a) () R/ R/ m y also y v i t + at a y t (3) and α a R y Rt (4) I M R + R 5 8 MR (5) Substituting (), (3), (4) and (5) into () we find τ f m g y t R 5 8 MR y (Rt ) R m g y t 5 My 4 t 0.69 (a) While decelerating, τ f Iα' (0 000 kg m ).00 rev/min (π rad/rev)( min/60 s) 0.0 s τ f 49 N m While accelerating, τ Iα or τ τ f I( ω/ t) τ 49 N m + (0 000 kg m ) 0.00 rev/min (π rad/rev)( min/60 s).0 s τ N m P τ f ω (49 N m) 0.0 rev min π rad rev min 60 s 439 W ( 0.6 hp) 000 by Harcourt College Publishers. All rights reserved.

32 3 Chapter 0 Solutions 0.70 (a) W K + U R W K f K i + U f U i 0 mv + Iω mgd sin θ kd m k ω (I + mr ) mgd sin θ + kd θ ω mgd sin θ + kd I + mr ω (0.500 kg)(9.80 m/s )(0.00 m)(sin 37.0 ) + (50.0 N/m)(0.00 m).00 kg m + (0.500 kg)(0.300 m) ω rad/s 0.7 (a) m g T m a.00 m/s T m (g a) (0.0 kg)( )m/s 56 N T T T m g sin m a T (5.0 kg)(9.80 sin )m/s 8 N 5.0 kg m 37.0 m 0.0 kg (T T )R Iα I a R I (T T )R a (56 8)N(0.50 m).00 m/s.7 kg m Goal Solution G: In earlier problems, we assumed that the tension in a string was the same on either side of a pulley. Here we see that the moment of inertia changes that assumption, but we should still expect the tensions to be similar in magnitude (about the weight of each mass ~50 N), and T > T for the pulley to rotate clockwise as shown. If we knew the mass of the pulley, we could calculate its moment of inertia, but since we only know the acceleration, it is difficult to estimate I. We at least know that I must have units of kgm, and a 50-cm disk probably has a mass less than 0 kg, so I is probably less than 0.3 kgm. O: For each block, we know its mass and acceleration, so we can use Newton s second law to find the net force, and from it the tension. The difference in the two tensions causes the pulley to rotate, so this net torque and the resulting angular acceleration can be used to find the pulley s moment of inertia. 000 by Harcourt College Publishers. All rights reserved.

33 Chapter 0 Solutions 33 A: (a) Apply F ma to each block to find each string tension. The forces acting on the 5-kg block are its weight, the normal support force from the incline, and T. Taking the positive x axis as directed up the incline, F x ma x yields: (m g) x + T m (+a) (5.0 kg)(9.80 m/s ) sin 37 + T (5.0 kg)(.00 m/s ) T 8 N Similarly for the counterweight, we have F y ma y, or T m g m ( a) T (0.0 kg)(9.80 m/s ) (0.0 kg)(.00 m/s ) So, T 56 N Now for the pulley, τ r(t T ) Iα. We may choose to call clockwise positive. The angular acceleration is α a r.00 m/s 0.50 m 8.00 rad/s τ Iα or (0.50 m)(56 N 8 N) I(8.00 rad/s ) I 9.38 N m 8.00 rad/s.7 kg m L: The tensions are close to the weight of each mass and T > T as expected. However, the moment of inertia for the pulley is about 4 times greater than expected. Unless we made a mistake in solving this problem, our result means that the pulley has a mass of 37.4 kg (about 80 lb), which means that the pulley is probably made of a dense material, like steel. This is certainly not a problem where the mass of the pulley can be ignored since the pulley has more mass than the combination of the two blocks! 0.7 For the board just starting to move, τ Iα mg l cos θ 3 ml α R mg α 3 g l cos θ 000 by Harcourt College Publishers. All rights reserved.

34 34 Chapter 0 Solutions The tangential acceleration of the end is a t lα 3 g cos θ Its vertical component is a y a t cos θ 3 g cos θ If this is greater than g, the board will pull ahead of the ball in falling: (a) 3 g cos θ g cos θ 3 so cos θ 3 and θ 35.3 When θ 35.3 ( cos θ /3), the cup will land underneath the release-point of the ball if r c l cos θ l cos θ cos θ l 3 cos θ (c) When l.00 m, and θ 35.3 (.00 m) r c 3 / m which is (.00 m 0.86 m) 0.84 m from the moving end 0.73 At t 0, ω 3.50 rad/s ω 0 e 0. Thus, ω rad/s At t 9.30 s, ω.00 rad/s ω 0 e σ(9.30 s), yielding σ s (a) α dω dt At t 3.00 s, d(ω 0e σt ) dt ω 0 ( σ)e σt α (3.50 rad/s)( s )e 3.00(6.0 0 ) 0.76 rad/s θ t ω 0 e σt dt ω 0 0 σ [e σt ] ω 0 σ [ e σt ] At t.50 s, 3.50 rad/s θ (6.0 0 )/s [ e (6.0 0 )(.50) ] 8. rad.9 rev 000 by Harcourt College Publishers. All rights reserved.

35 Chapter 0 Solutions 35 (c) As t, θ ω 0 σ ( 3.50 rad/s e ) s 58. rad 9.6 rev 000 by Harcourt College Publishers. All rights reserved.

36 36 Chapter 0 Solutions 0.74 Consider the total weight of each hand to act at the center of gravity (mid-point) of that hand. Then the total torque (taking CCW as positive) of these hands about the center of the clock is given by L h τ m h g L m sin θ h m m g sin θ m g (m hl h sin θ h + m m L m sin θ m ) If we take t 0 at o'clock, then the angular positions of the hands at time t are θ h ω h t, where ω h π 6 rad/h and θ m ω m t, where ω m π rad/h Therefore, τ 4.90 m s [(60.0 kg)(.70 m) sin (πt/6) + (00 kg)(4.50 m) sin πt] or τ 794 N m[sin(πt/6) +.78 sin πt], where t is in hours. (a) (i) At 3:00, t 3.00 h, so τ 794 N m [sin(π/) +.78 sin 6π] 794 N m (ii) At 5:5, t 5 h h 5.5 h, and substitution gives: τ 50 N m (iii) At 6:00, τ 0 N m (iv) At 8:0, τ 60 N m (v) At 9:45, τ 940 N m The total torque is zero at those times when sin(πt/6) +.78 sin πt 0 We proceed numerically, to find 0, ,..., corresponding to the times :00:00 :30:55 :58:9 :3:3 :57:0 :33:5 :56:9 3:33: 3:56:55 4:3:4 4:58:4 5:30:5 6:00:00 6:9:08 7:0:46 7:7:36 8:03:05 8:6:38 9:03:3 9:6:35 0:0:59 0:7:9 :0:4 :9: by Harcourt College Publishers. All rights reserved.

Physics 4A Solutions to Chapter 10 Homework

Physics 4A Solutions to Chapter 10 Homework Physics 4A Solutions to Chapter 0 Homework Chapter 0 Questions: 4, 6, 8 Exercises & Problems 6, 3, 6, 4, 45, 5, 5, 7, 8 Answers to Questions: Q 0-4 (a) positive (b) zero (c) negative (d) negative Q 0-6

More information

a +3bt 2 4ct 3) =6bt 12ct 2. dt 2. (a) The second hand of the smoothly running watch turns through 2π radians during 60 s. Thus,

a +3bt 2 4ct 3) =6bt 12ct 2. dt 2. (a) The second hand of the smoothly running watch turns through 2π radians during 60 s. Thus, 1. a) Eq. 11-6 leads to ω d at + bt 3 ct 4) a +3bt 4ct 3. dt b) And Eq. 11-8 gives α d a +3bt 4ct 3) 6bt 1ct. dt. a) The second hand of the smoothly running watch turns through π radians during 60 s. Thus,

More information

Handout 7: Torque, angular momentum, rotational kinetic energy and rolling motion. Torque and angular momentum

Handout 7: Torque, angular momentum, rotational kinetic energy and rolling motion. Torque and angular momentum Handout 7: Torque, angular momentum, rotational kinetic energy and rolling motion Torque and angular momentum In Figure, in order to turn a rod about a fixed hinge at one end, a force F is applied at a

More information

Chapter 10. Rotation of a Rigid Object about a Fixed Axis

Chapter 10. Rotation of a Rigid Object about a Fixed Axis Chapter 10 Rotation of a Rigid Object about a Fixed Axis Angular Position Axis of rotation is the center of the disc Choose a fixed reference line. Point P is at a fixed distance r from the origin. A small

More information

Translational vs Rotational. m x. Connection Δ = = = = = = Δ = = = = = = Δ =Δ = = = = = 2 / 1/2. Work

Translational vs Rotational. m x. Connection Δ = = = = = = Δ = = = = = = Δ =Δ = = = = = 2 / 1/2. Work Translational vs Rotational / / 1/ Δ m x v dx dt a dv dt F ma p mv KE mv Work Fd / / 1/ θ ω θ α ω τ α ω ω τθ Δ I d dt d dt I L I KE I Work / θ ω α τ Δ Δ c t s r v r a v r a r Fr L pr Connection Translational

More information

Angular velocity and angular acceleration CHAPTER 9 ROTATION. Angular velocity and angular acceleration. ! equations of rotational motion

Angular velocity and angular acceleration CHAPTER 9 ROTATION. Angular velocity and angular acceleration. ! equations of rotational motion Angular velocity and angular acceleration CHAPTER 9 ROTATION! r i ds i dθ θ i Angular velocity and angular acceleration! equations of rotational motion Torque and Moment of Inertia! Newton s nd Law for

More information

Angular Displacement. θ i. 1rev = 360 = 2π rads. = "angular displacement" Δθ = θ f. π = circumference. diameter

Angular Displacement. θ i. 1rev = 360 = 2π rads. = angular displacement Δθ = θ f. π = circumference. diameter Rotational Motion Angular Displacement π = circumference diameter π = circumference 2 radius circumference = 2πr Arc length s = rθ, (where θ in radians) θ 1rev = 360 = 2π rads Δθ = θ f θ i = "angular displacement"

More information

Rotational Motion and Torque

Rotational Motion and Torque Rotational Motion and Torque Introduction to Angular Quantities Sections 8- to 8-2 Introduction Rotational motion deals with spinning objects, or objects rotating around some point. Rotational motion is

More information

Chapter 10. Rotation

Chapter 10. Rotation Chapter 10 Rotation Rotation Rotational Kinematics: Angular velocity and Angular Acceleration Rotational Kinetic Energy Moment of Inertia Newton s nd Law for Rotation Applications MFMcGraw-PHY 45 Chap_10Ha-Rotation-Revised

More information

31 ROTATIONAL KINEMATICS

31 ROTATIONAL KINEMATICS 31 ROTATIONAL KINEMATICS 1. Compare and contrast circular motion and rotation? Address the following Which involves an object and which involves a system? Does an object/system in circular motion have

More information

Rotation. Rotational Variables

Rotation. Rotational Variables Rotation Rigid Bodies Rotation variables Constant angular acceleration Rotational KE Rotational Inertia Rotational Variables Rotation of a rigid body About a fixed rotation axis. Rigid Body an object that

More information

Physics 111. Lecture 23 (Walker: 10.6, 11.1) Conservation of Energy in Rotation Torque March 30, Kinetic Energy of Rolling Object

Physics 111. Lecture 23 (Walker: 10.6, 11.1) Conservation of Energy in Rotation Torque March 30, Kinetic Energy of Rolling Object Physics 111 Lecture 3 (Walker: 10.6, 11.1) Conservation of Energy in Rotation Torque March 30, 009 Lecture 3 1/4 Kinetic Energy of Rolling Object Total kinetic energy of a rolling object is the sum of

More information

Chapter 8 continued. Rotational Dynamics

Chapter 8 continued. Rotational Dynamics Chapter 8 continued Rotational Dynamics 8.4 Rotational Work and Energy Work to accelerate a mass rotating it by angle φ F W = F(cosθ)x x = rφ = Frφ Fr = τ (torque) = τφ r φ s F to x θ = 0 DEFINITION OF

More information

Rotational Dynamics continued

Rotational Dynamics continued Chapter 9 Rotational Dynamics continued 9.4 Newton s Second Law for Rotational Motion About a Fixed Axis ROTATIONAL ANALOG OF NEWTON S SECOND LAW FOR A RIGID BODY ROTATING ABOUT A FIXED AXIS I = ( mr 2

More information

CHAPTER 11. Answer to Checkpoint Questions

CHAPTER 11. Answer to Checkpoint Questions 96 CHAPTER 11 ROTATIONAL MOTION CHAPTER 11 Answer to Checkpoint Questions 1. (b) and (c). (a) and (d) 3. (a) yes; (b) no; (c) yes; (d) yes 4. all tie 5. 1,, 4, 3 6. (a) 1 and 3 tie, 4, then and 5 tie (zero)

More information

are (0 cm, 10 cm), (10 cm, 10 cm), and (10 cm, 0 cm), respectively. Solve: The coordinates of the center of mass are = = = (200 g g g)

are (0 cm, 10 cm), (10 cm, 10 cm), and (10 cm, 0 cm), respectively. Solve: The coordinates of the center of mass are = = = (200 g g g) Rotational Motion Problems Solutions.. Model: A spinning skater, whose arms are outstretched, is a rigid rotating body. Solve: The speed v rω, where r 40 / 0.70 m. Also, 80 rpm (80) π/60 rad/s 6 π rad/s.

More information

Circular Motion, Pt 2: Angular Dynamics. Mr. Velazquez AP/Honors Physics

Circular Motion, Pt 2: Angular Dynamics. Mr. Velazquez AP/Honors Physics Circular Motion, Pt 2: Angular Dynamics Mr. Velazquez AP/Honors Physics Formulas: Angular Kinematics (θ must be in radians): s = rθ Arc Length 360 = 2π rads = 1 rev ω = θ t = v t r Angular Velocity α av

More information

6. Find the net torque on the wheel in Figure about the axle through O if a = 10.0 cm and b = 25.0 cm.

6. Find the net torque on the wheel in Figure about the axle through O if a = 10.0 cm and b = 25.0 cm. 1. During a certain period of time, the angular position of a swinging door is described by θ = 5.00 + 10.0t + 2.00t 2, where θ is in radians and t is in seconds. Determine the angular position, angular

More information

Review questions. Before the collision, 70 kg ball is stationary. Afterward, the 30 kg ball is stationary and 70 kg ball is moving to the right.

Review questions. Before the collision, 70 kg ball is stationary. Afterward, the 30 kg ball is stationary and 70 kg ball is moving to the right. Review questions Before the collision, 70 kg ball is stationary. Afterward, the 30 kg ball is stationary and 70 kg ball is moving to the right. 30 kg 70 kg v (a) Is this collision elastic? (b) Find the

More information

Rotational Kinematics and Dynamics. UCVTS AIT Physics

Rotational Kinematics and Dynamics. UCVTS AIT Physics Rotational Kinematics and Dynamics UCVTS AIT Physics Angular Position Axis of rotation is the center of the disc Choose a fixed reference line Point P is at a fixed distance r from the origin Angular Position,

More information

11-2 A General Method, and Rolling without Slipping

11-2 A General Method, and Rolling without Slipping 11-2 A General Method, and Rolling without Slipping Let s begin by summarizing a general method for analyzing situations involving Newton s Second Law for Rotation, such as the situation in Exploration

More information

Chapter 8 Lecture Notes

Chapter 8 Lecture Notes Chapter 8 Lecture Notes Physics 2414 - Strauss Formulas: v = l / t = r θ / t = rω a T = v / t = r ω / t =rα a C = v 2 /r = ω 2 r ω = ω 0 + αt θ = ω 0 t +(1/2)αt 2 θ = (1/2)(ω 0 +ω)t ω 2 = ω 0 2 +2αθ τ

More information

Chapter 8 continued. Rotational Dynamics

Chapter 8 continued. Rotational Dynamics Chapter 8 continued Rotational Dynamics 8.4 Rotational Work and Energy Work to accelerate a mass rotating it by angle φ F W = F(cosθ)x x = s = rφ = Frφ Fr = τ (torque) = τφ r φ s F to s θ = 0 DEFINITION

More information

AP Physics. Harmonic Motion. Multiple Choice. Test E

AP Physics. Harmonic Motion. Multiple Choice. Test E AP Physics Harmonic Motion Multiple Choice Test E A 0.10-Kg block is attached to a spring, initially unstretched, of force constant k = 40 N m as shown below. The block is released from rest at t = 0 sec.

More information

Quiz Number 4 PHYSICS April 17, 2009

Quiz Number 4 PHYSICS April 17, 2009 Instructions Write your name, student ID and name of your TA instructor clearly on all sheets and fill your name and student ID on the bubble sheet. Solve all multiple choice questions. No penalty is given

More information

We define angular displacement, θ, and angular velocity, ω. What's a radian?

We define angular displacement, θ, and angular velocity, ω. What's a radian? We define angular displacement, θ, and angular velocity, ω Units: θ = rad ω = rad/s What's a radian? Radian is the ratio between the length of an arc and its radius note: counterclockwise is + clockwise

More information

ω avg [between t 1 and t 2 ] = ω(t 1) + ω(t 2 ) 2

ω avg [between t 1 and t 2 ] = ω(t 1) + ω(t 2 ) 2 PHY 302 K. Solutions for problem set #9. Textbook problem 7.10: For linear motion at constant acceleration a, average velocity during some time interval from t 1 to t 2 is the average of the velocities

More information

Chapter 8. Rotational Equilibrium and Rotational Dynamics

Chapter 8. Rotational Equilibrium and Rotational Dynamics Chapter 8 Rotational Equilibrium and Rotational Dynamics Wrench Demo Torque Torque, τ, is the tendency of a force to rotate an object about some axis τ = Fd F is the force d is the lever arm (or moment

More information

Two-Dimensional Rotational Kinematics

Two-Dimensional Rotational Kinematics Two-Dimensional Rotational Kinematics Rigid Bodies A rigid body is an extended object in which the distance between any two points in the object is constant in time. Springs or human bodies are non-rigid

More information

Relating Linear and Angular Kinematics. a rad = v 2 /r = rω 2

Relating Linear and Angular Kinematics. a rad = v 2 /r = rω 2 PH2213 : Advanced Examples from Chapter 10 : Rotational Motion NOTE: these are somewhat advanced examples of how we can apply the methods from this chapter, so are beyond what will be on the final exam

More information

PH1104/PH114S MECHANICS

PH1104/PH114S MECHANICS PH04/PH4S MECHANICS SEMESTER I EXAMINATION 06-07 SOLUTION MULTIPLE-CHOICE QUESTIONS. (B) For freely falling bodies, the equation v = gh holds. v is proportional to h, therefore v v = h h = h h =.. (B).5i

More information

Chapter 12: Rotation of Rigid Bodies. Center of Mass Moment of Inertia Torque Angular Momentum Rolling Statics

Chapter 12: Rotation of Rigid Bodies. Center of Mass Moment of Inertia Torque Angular Momentum Rolling Statics Chapter 1: Rotation of Rigid Bodies Center of Mass Moment of Inertia Torque Angular Momentum Rolling Statics Translational vs Rotational / / 1/ m x v dx dt a dv dt F ma p mv KE mv Work Fd P Fv / / 1/ I

More information

Rotational Kinetic Energy

Rotational Kinetic Energy Lecture 17, Chapter 10: Rotational Energy and Angular Momentum 1 Rotational Kinetic Energy Consider a rigid body rotating with an angular velocity ω about an axis. Clearly every point in the rigid body

More information

Rotation. PHYS 101 Previous Exam Problems CHAPTER

Rotation. PHYS 101 Previous Exam Problems CHAPTER PHYS 101 Previous Exam Problems CHAPTER 10 Rotation Rotational kinematics Rotational inertia (moment of inertia) Kinetic energy Torque Newton s 2 nd law Work, power & energy conservation 1. Assume that

More information

Chapter 8 Lecture. Pearson Physics. Rotational Motion and Equilibrium. Prepared by Chris Chiaverina Pearson Education, Inc.

Chapter 8 Lecture. Pearson Physics. Rotational Motion and Equilibrium. Prepared by Chris Chiaverina Pearson Education, Inc. Chapter 8 Lecture Pearson Physics Rotational Motion and Equilibrium Prepared by Chris Chiaverina Chapter Contents Describing Angular Motion Rolling Motion and the Moment of Inertia Torque Static Equilibrium

More information

Plane Motion of Rigid Bodies: Forces and Accelerations

Plane Motion of Rigid Bodies: Forces and Accelerations Plane Motion of Rigid Bodies: Forces and Accelerations Reference: Beer, Ferdinand P. et al, Vector Mechanics for Engineers : Dynamics, 8 th Edition, Mc GrawHill Hibbeler R.C., Engineering Mechanics: Dynamics,

More information

Chapter 10: Rotation

Chapter 10: Rotation Chapter 10: Rotation Review of translational motion (motion along a straight line) Position x Displacement x Velocity v = dx/dt Acceleration a = dv/dt Mass m Newton s second law F = ma Work W = Fdcosφ

More information

Rotational Motion. Rotational Motion. Rotational Motion

Rotational Motion. Rotational Motion. Rotational Motion I. Rotational Kinematics II. Rotational Dynamics (Netwton s Law for Rotation) III. Angular Momentum Conservation 1. Remember how Newton s Laws for translational motion were studied: 1. Kinematics (x =

More information

Description: Using conservation of energy, find the final velocity of a "yo yo" as it unwinds under the influence of gravity.

Description: Using conservation of energy, find the final velocity of a yo yo as it unwinds under the influence of gravity. Chapter 10 [ Edit ] Overview Summary View Diagnostics View Print View with Answers Chapter 10 Due: 11:59pm on Sunday, November 6, 2016 To understand how points are awarded, read the Grading Policy for

More information

Chap. 10: Rotational Motion

Chap. 10: Rotational Motion Chap. 10: Rotational Motion I. Rotational Kinematics II. Rotational Dynamics - Newton s Law for Rotation III. Angular Momentum Conservation (Chap. 10) 1 Newton s Laws for Rotation n e t I 3 rd part [N

More information

Physics 101 Lecture 12 Equilibrium and Angular Momentum

Physics 101 Lecture 12 Equilibrium and Angular Momentum Physics 101 Lecture 1 Equilibrium and Angular Momentum Ali ÖVGÜN EMU Physics Department www.aovgun.com Static Equilibrium q Equilibrium and static equilibrium q Static equilibrium conditions n Net external

More information

PHYS 111 HOMEWORK #11

PHYS 111 HOMEWORK #11 PHYS 111 HOMEWORK #11 Due date: You have a choice here. You can submit this assignment on Tuesday, December and receive a 0 % bonus, or you can submit this for normal credit on Thursday, 4 December. If

More information

MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question.

MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question. Exam Name MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question. 1) Two men, Joel and Jerry, push against a wall. Jerry stops after 10 min, while Joel is

More information

Name Date Period PROBLEM SET: ROTATIONAL DYNAMICS

Name Date Period PROBLEM SET: ROTATIONAL DYNAMICS Accelerated Physics Rotational Dynamics Problem Set Page 1 of 5 Name Date Period PROBLEM SET: ROTATIONAL DYNAMICS Directions: Show all work on a separate piece of paper. Box your final answer. Don t forget

More information

Physics 201. Professor P. Q. Hung. 311B, Physics Building. Physics 201 p. 1/1

Physics 201. Professor P. Q. Hung. 311B, Physics Building. Physics 201 p. 1/1 Physics 201 p. 1/1 Physics 201 Professor P. Q. Hung 311B, Physics Building Physics 201 p. 2/1 Rotational Kinematics and Energy Rotational Kinetic Energy, Moment of Inertia All elements inside the rigid

More information

Exercise Torque Magnitude Ranking Task. Part A

Exercise Torque Magnitude Ranking Task. Part A Exercise 10.2 Calculate the net torque about point O for the two forces applied as in the figure. The rod and both forces are in the plane of the page. Take positive torques to be counterclockwise. τ 28.0

More information

Test 7 wersja angielska

Test 7 wersja angielska Test 7 wersja angielska 7.1A One revolution is the same as: A) 1 rad B) 57 rad C) π/2 rad D) π rad E) 2π rad 7.2A. If a wheel turns with constant angular speed then: A) each point on its rim moves with

More information

PSI AP Physics I Rotational Motion

PSI AP Physics I Rotational Motion PSI AP Physics I Rotational Motion Multiple-Choice questions 1. Which of the following is the unit for angular displacement? A. meters B. seconds C. radians D. radians per second 2. An object moves from

More information

Textbook Reference: Wilson, Buffa, Lou: Chapter 8 Glencoe Physics: Chapter 8

Textbook Reference: Wilson, Buffa, Lou: Chapter 8 Glencoe Physics: Chapter 8 AP Physics Rotational Motion Introduction: Which moves with greater speed on a merry-go-round - a horse near the center or one near the outside? Your answer probably depends on whether you are considering

More information

Name: Date: Period: AP Physics C Rotational Motion HO19

Name: Date: Period: AP Physics C Rotational Motion HO19 1.) A wheel turns with constant acceleration 0.450 rad/s 2. (9-9) Rotational Motion H19 How much time does it take to reach an angular velocity of 8.00 rad/s, starting from rest? Through how many revolutions

More information

Chapters 10 & 11: Rotational Dynamics Thursday March 8 th

Chapters 10 & 11: Rotational Dynamics Thursday March 8 th Chapters 10 & 11: Rotational Dynamics Thursday March 8 th Review of rotational kinematics equations Review and more on rotational inertia Rolling motion as rotation and translation Rotational kinetic energy

More information

1 MR SAMPLE EXAM 3 FALL 2013

1 MR SAMPLE EXAM 3 FALL 2013 SAMPLE EXAM 3 FALL 013 1. A merry-go-round rotates from rest with an angular acceleration of 1.56 rad/s. How long does it take to rotate through the first rev? A) s B) 4 s C) 6 s D) 8 s E) 10 s. A wheel,

More information

Class XI Chapter 7- System of Particles and Rotational Motion Physics

Class XI Chapter 7- System of Particles and Rotational Motion Physics Page 178 Question 7.1: Give the location of the centre of mass of a (i) sphere, (ii) cylinder, (iii) ring, and (iv) cube, each of uniform mass density. Does the centre of mass of a body necessarily lie

More information

ROTATORY MOTION. ii) iii) iv) W = v) Power = vi) Torque ( vii) Angular momentum (L) = Iω similar to P = mv 1 Iω. similar to F = ma

ROTATORY MOTION. ii) iii) iv) W = v) Power = vi) Torque ( vii) Angular momentum (L) = Iω similar to P = mv 1 Iω. similar to F = ma OTATOY MOTION Synopsis : CICULA MOTION :. In translatory motion, every particle travels the same distance along parallel paths, which may be straight or curved. Every particle of the body has the same

More information

Rotation. Kinematics Rigid Bodies Kinetic Energy. Torque Rolling. featuring moments of Inertia

Rotation. Kinematics Rigid Bodies Kinetic Energy. Torque Rolling. featuring moments of Inertia Rotation Kinematics Rigid Bodies Kinetic Energy featuring moments of Inertia Torque Rolling Angular Motion We think about rotation in the same basic way we do about linear motion How far does it go? How

More information

Physics 12. Unit 5 Circular Motion and Gravitation Part 1

Physics 12. Unit 5 Circular Motion and Gravitation Part 1 Physics 12 Unit 5 Circular Motion and Gravitation Part 1 1. Nonlinear motions According to the Newton s first law, an object remains its tendency of motion as long as there is no external force acting

More information

DYNAMICS MOMENT OF INERTIA

DYNAMICS MOMENT OF INERTIA DYNAMICS MOMENT OF INERTIA S TO SELF ASSESSMENT EXERCISE No.1 1. A cylinder has a mass of 1 kg, outer radius of 0.05 m and radius of gyration 0.03 m. It is allowed to roll down an inclined plane until

More information

AP Physics 1: Rotational Motion & Dynamics: Problem Set

AP Physics 1: Rotational Motion & Dynamics: Problem Set AP Physics 1: Rotational Motion & Dynamics: Problem Set I. Axis of Rotation and Angular Properties 1. How many radians are subtended by a 0.10 m arc of a circle of radius 0.40 m? 2. How many degrees are

More information

Physics 101 Lecture 11 Torque

Physics 101 Lecture 11 Torque Physics 101 Lecture 11 Torque Dr. Ali ÖVGÜN EMU Physics Department www.aovgun.com Force vs. Torque q Forces cause accelerations q What cause angular accelerations? q A door is free to rotate about an axis

More information

Chapter 8 Solutions. The change in potential energy as it moves from A to B is. The change in potential energy in going from A to B is

Chapter 8 Solutions. The change in potential energy as it moves from A to B is. The change in potential energy in going from A to B is Chapter 8 Solutions *8. (a) With our choice for the zero level for potential energy at point B, U B = 0. At point A, the potential energy is given by U A = mgy where y is the vertical height above zero

More information

Physics 2210 Homework 18 Spring 2015

Physics 2210 Homework 18 Spring 2015 Physics 2210 Homework 18 Spring 2015 Charles Jui April 12, 2015 IE Sphere Incline Wording A solid sphere of uniform density starts from rest and rolls without slipping down an inclined plane with angle

More information

ENGINEERING COUNCIL CERTIFICATE LEVEL MECHANICAL AND STRUCTURAL ENGINEERING C105 TUTORIAL 13 - MOMENT OF INERTIA

ENGINEERING COUNCIL CERTIFICATE LEVEL MECHANICAL AND STRUCTURAL ENGINEERING C105 TUTORIAL 13 - MOMENT OF INERTIA ENGINEERING COUNCIL CERTIFICATE LEVEL MECHANICAL AND STRUCTURAL ENGINEERING C15 TUTORIAL 1 - MOMENT OF INERTIA This tutorial covers essential material for this exam. On completion of this tutorial you

More information

= o + t = ot + ½ t 2 = o + 2

= o + t = ot + ½ t 2 = o + 2 Chapters 8-9 Rotational Kinematics and Dynamics Rotational motion Rotational motion refers to the motion of an object or system that spins about an axis. The axis of rotation is the line about which the

More information

Lecture 7 Chapter 10,11

Lecture 7 Chapter 10,11 Lecture 7 Chapter 10,11 Rotation, Inertia, Rolling, Torque, and Angular momentum Demo Demos Summary of Concepts to Cover from chapter 10 Rotation Rotating cylinder with string wrapped around it: example

More information

PHYS 21: Assignment 4 Solutions

PHYS 21: Assignment 4 Solutions PHYS 1: Assignment 4 Solutions Due on Feb 4 013 Prof. Oh Katharine Hyatt 1 Katharine Hyatt PHYS 1 (Prof. Oh ): Assignment 4 Solutions H + R 1.43 We see immediately that there is friction in this problem,

More information

1.1. Rotational Kinematics Description Of Motion Of A Rotating Body

1.1. Rotational Kinematics Description Of Motion Of A Rotating Body PHY 19- PHYSICS III 1. Moment Of Inertia 1.1. Rotational Kinematics Description Of Motion Of A Rotating Body 1.1.1. Linear Kinematics Consider the case of linear kinematics; it concerns the description

More information

PSI AP Physics I Rotational Motion

PSI AP Physics I Rotational Motion PSI AP Physics I Rotational Motion Multiple-Choice questions 1. Which of the following is the unit for angular displacement? A. meters B. seconds C. radians D. radians per second 2. An object moves from

More information

Chapter 9- Static Equilibrium

Chapter 9- Static Equilibrium Chapter 9- Static Equilibrium Changes in Office-hours The following changes will take place until the end of the semester Office-hours: - Monday, 12:00-13:00h - Wednesday, 14:00-15:00h - Friday, 13:00-14:00h

More information

Rotational motion problems

Rotational motion problems Rotational motion problems. (Massive pulley) Masses m and m 2 are connected by a string that runs over a pulley of radius R and moment of inertia I. Find the acceleration of the two masses, as well as

More information

DYNAMICS OF RIGID BODIES

DYNAMICS OF RIGID BODIES DYNAMICS OF RIGID BODIES Measuring angles in radian Define the value of an angle θ in radian as θ = s r, or arc length s = rθ a pure number, without dimension independent of radius r of the circle one

More information

Uniform Circular Motion

Uniform Circular Motion Uniform Circular Motion Motion in a circle at constant angular speed. ω: angular velocity (rad/s) Rotation Angle The rotation angle is the ratio of arc length to radius of curvature. For a given angle,

More information

The acceleration due to gravity g, which varies with latitude and height, will be approximated to 101m1s 2, unless otherwise specified.

The acceleration due to gravity g, which varies with latitude and height, will be approximated to 101m1s 2, unless otherwise specified. The acceleration due to gravity g, which varies with latitude and height, will be approximated to 101m1s 2, unless otherwise specified. F1 (a) The fulcrum in this case is the horizontal axis, perpendicular

More information

Work and kinetic Energy

Work and kinetic Energy Work and kinetic Energy Problem 66. M=4.5kg r = 0.05m I = 0.003kgm 2 Q: What is the velocity of mass m after it dropped a distance h? (No friction) h m=0.6kg mg Work and kinetic Energy Problem 66. M=4.5kg

More information

Physics 207: Lecture 24. Announcements. No labs next week, May 2 5 Exam 3 review session: Wed, May 4 from 8:00 9:30 pm; here.

Physics 207: Lecture 24. Announcements. No labs next week, May 2 5 Exam 3 review session: Wed, May 4 from 8:00 9:30 pm; here. Physics 07: Lecture 4 Announcements No labs next week, May 5 Exam 3 review session: Wed, May 4 from 8:00 9:30 pm; here Today s Agenda ecap: otational dynamics and torque Work and energy with example Many

More information

Chapter 8 - Rotational Dynamics and Equilibrium REVIEW

Chapter 8 - Rotational Dynamics and Equilibrium REVIEW Pagpalain ka! (Good luck, in Filipino) Date Chapter 8 - Rotational Dynamics and Equilibrium REVIEW TRUE/FALSE. Write 'T' if the statement is true and 'F' if the statement is false. 1) When a rigid body

More information

Webreview Torque and Rotation Practice Test

Webreview Torque and Rotation Practice Test Please do not write on test. ID A Webreview - 8.2 Torque and Rotation Practice Test Multiple Choice Identify the choice that best completes the statement or answers the question. 1. A 0.30-m-radius automobile

More information

Relating Translational and Rotational Variables

Relating Translational and Rotational Variables Relating Translational and Rotational Variables Rotational position and distance moved s = θ r (only radian units) Rotational and translational speed d s v = dt v = ω r = ds dt = d θ dt r Relating period

More information

Rotation. I. Kinematics - Angular analogs

Rotation. I. Kinematics - Angular analogs Rotation I. Kinematics - Angular analogs II. III. IV. Dynamics - Torque and Rotational Inertia Work and Energy Angular Momentum - Bodies and particles V. Elliptical Orbits The student will be able to:

More information

Chapter 9-10 Test Review

Chapter 9-10 Test Review Chapter 9-10 Test Review Chapter Summary 9.2. The Second Condition for Equilibrium Explain torque and the factors on which it depends. Describe the role of torque in rotational mechanics. 10.1. Angular

More information

Moment of Inertia Race

Moment of Inertia Race Review Two points, A and B, are on a disk that rotates with a uniform speed about an axis. Point A is closer to the axis than point B. Which of the following is NOT true? 1. Point B has the greater tangential

More information

Physics 201 Midterm Exam 3

Physics 201 Midterm Exam 3 Physics 201 Midterm Exam 3 Information and Instructions Student ID Number: Section Number: TA Name: Please fill in all the information above. Please write and bubble your Name and Student Id number on

More information

Chapter 10.A. Rotation of Rigid Bodies

Chapter 10.A. Rotation of Rigid Bodies Chapter 10.A Rotation of Rigid Bodies P. Lam 7_23_2018 Learning Goals for Chapter 10.1 Understand the equations govern rotational kinematics, and know how to apply them. Understand the physical meanings

More information

Lecture 5 Review. 1. Rotation axis: axis in which rigid body rotates about. It is perpendicular to the plane of rotation.

Lecture 5 Review. 1. Rotation axis: axis in which rigid body rotates about. It is perpendicular to the plane of rotation. PHYSICAL SCIENCES 1 Concepts Lecture 5 Review Fall 017 1. Rotation axis: axis in which rigid body rotates about. It is perpendicular to the plane of rotation.. Angle θ: The angle at which the rigid body

More information

Dynamics of Rotation

Dynamics of Rotation Dynamics of Rotation 1 Dynamic of Rotation Angular velocity and acceleration are denoted ω and α respectively and have units of rad/s and rad/s. Relationship between Linear and Angular Motions We can show

More information

Pleeeeeeeeeeeeeease mark your UFID, exam number, and name correctly. 20 problems 3 problems from exam 2

Pleeeeeeeeeeeeeease mark your UFID, exam number, and name correctly. 20 problems 3 problems from exam 2 Pleeeeeeeeeeeeeease mark your UFID, exam number, and name correctly. 20 problems 3 problems from exam 1 3 problems from exam 2 6 problems 13.1 14.6 (including 14.5) 8 problems 1.1---9.6 Go through the

More information

Chap10. Rotation of a Rigid Object about a Fixed Axis

Chap10. Rotation of a Rigid Object about a Fixed Axis Chap10. Rotation of a Rigid Object about a Fixed Axis Level : AP Physics Teacher : Kim 10.1 Angular Displacement, Velocity, and Acceleration - A rigid object rotating about a fixed axis through O perpendicular

More information

Name (please print): UW ID# score last first

Name (please print): UW ID# score last first Name (please print): UW ID# score last first Question I. (20 pts) Projectile motion A ball of mass 0.3 kg is thrown at an angle of 30 o above the horizontal. Ignore air resistance. It hits the ground 100

More information

Chapter 10: Rotation. Chapter 10: Rotation

Chapter 10: Rotation. Chapter 10: Rotation Chapter 10: Rotation Change in Syllabus: Only Chapter 10 problems (CH10: 04, 27, 67) are due on Thursday, Oct. 14. The Chapter 11 problems (Ch11: 06, 37, 50) will be due on Thursday, Oct. 21 in addition

More information

Non-textbook problem #I: Let s start with a schematic side view of the drawbridge and the forces acting on it: F axle θ

Non-textbook problem #I: Let s start with a schematic side view of the drawbridge and the forces acting on it: F axle θ PHY 309 K. Solutions for Problem set # 10. Non-textbook problem #I: Let s start with a schematic side view of the drawbridge and the forces acting on it: F axle θ T mg The bridgeis shown just asit begins

More information

Question 7.1: Answer. Geometric centre; No

Question 7.1: Answer. Geometric centre; No Question 7.1: Give the location of the centre of mass of a (i) sphere, (ii) cylinder, (iii) ring,, and (iv) cube, each of uniform mass density. Does the centre of mass of a body necessarily lie inside

More information

Chapter 8- Rotational Kinematics Angular Variables Kinematic Equations

Chapter 8- Rotational Kinematics Angular Variables Kinematic Equations Chapter 8- Rotational Kinematics Angular Variables Kinematic Equations Chapter 9- Rotational Dynamics Torque Center of Gravity Newton s 2 nd Law- Angular Rotational Work & Energy Angular Momentum Angular

More information

Topic 1: Newtonian Mechanics Energy & Momentum

Topic 1: Newtonian Mechanics Energy & Momentum Work (W) the amount of energy transferred by a force acting through a distance. Scalar but can be positive or negative ΔE = W = F! d = Fdcosθ Units N m or Joules (J) Work, Energy & Power Power (P) the

More information

Chapter 13: Oscillatory Motions

Chapter 13: Oscillatory Motions Chapter 13: Oscillatory Motions Simple harmonic motion Spring and Hooe s law When a mass hanging from a spring and in equilibrium, the Newton s nd law says: Fy ma Fs Fg 0 Fs Fg This means the force due

More information

Chapter 10: Dynamics of Rotational Motion

Chapter 10: Dynamics of Rotational Motion Chapter 10: Dynamics of Rotational Motion What causes an angular acceleration? The effectiveness of a force at causing a rotation is called torque. QuickCheck 12.5 The four forces shown have the same strength.

More information

FALL TERM EXAM, PHYS 1211, INTRODUCTORY PHYSICS I Monday, 14 December 2015, 6 PM to 9 PM, Field House Gym

FALL TERM EXAM, PHYS 1211, INTRODUCTORY PHYSICS I Monday, 14 December 2015, 6 PM to 9 PM, Field House Gym FALL TERM EXAM, PHYS 111, INTRODUCTORY PHYSICS I Monday, 14 December 015, 6 PM to 9 PM, Field House Gym NAME: STUDENT ID: INSTRUCTION 1. This exam booklet has 13 pages. Make sure none are missing. There

More information

Answers to selected problems from Essential Physics, Chapter 10

Answers to selected problems from Essential Physics, Chapter 10 Answers to selected problems from Essential Physics, Chapter 10 1. (a) The red ones have the same speed as one another. The blue ones also have the same speed as one another, with a value twice the speed

More information

Physics 131: Lecture 21. Today s Agenda

Physics 131: Lecture 21. Today s Agenda Physics 131: Lecture 1 Today s Agenda Rotational dynamics Torque = I Angular Momentum Physics 01: Lecture 10, Pg 1 Newton s second law in rotation land Sum of the torques will equal the moment of inertia

More information

PROBLEM 16.4 SOLUTION

PROBLEM 16.4 SOLUTION PROBLEM 16.4 The motion of the.5-kg rod AB is guided b two small wheels which roll freel in horizontal slots. If a force P of magnitude 8 N is applied at B, determine (a) the acceleration of the rod, (b)

More information

AP Physics C: Rotation II. (Torque and Rotational Dynamics, Rolling Motion) Problems

AP Physics C: Rotation II. (Torque and Rotational Dynamics, Rolling Motion) Problems AP Physics C: Rotation II (Torque and Rotational Dynamics, Rolling Motion) Problems 1980M3. A billiard ball has mass M, radius R, and moment of inertia about the center of mass I c = 2 MR²/5 The ball is

More information

MASSACHUSETTS INSTITUTE OF TECHNOLOGY Physics Department 8.01 Physics I Fall Term 2009 Review Module on Solving N equations in N unknowns

MASSACHUSETTS INSTITUTE OF TECHNOLOGY Physics Department 8.01 Physics I Fall Term 2009 Review Module on Solving N equations in N unknowns MASSACHUSETTS INSTITUTE OF TECHNOLOGY Physics Department 8.01 Physics I Fall Term 2009 Review Module on Solving N equations in N unknowns Most students first exposure to solving N linear equations in N

More information