Second Order Systems
|
|
- Jody Reynolds
- 5 years ago
- Views:
Transcription
1 Second Order Systems independent energy storage elements => Resonance: inertance & capacitance trade energy, kinetic to potential Example: Automobile Suspension x z vertical motions suspension spring shock absorber wheel Xroad(z) Bond Graph
2 Extract State Equations: p = kδ + b v road (t) p δ = v road (t) p coupled st order differential equations Rearrange into standard form: x x + ζω x +ω = f (t) n n Differentiate nd, substitute st & nd into result: δ = d dt v (t) road p = d kδ + b v road (t) dt v (t) road δ = d dt v (t) kδ b road δ p δ + b δ + k δ = d dt v (t) road Compare equations
3 f (t) = d dt v road, ζ = b, = k, ζ = b = System parameters natural frequency damping ratio ζ b k = k Solution by superposition x = omogeneous + x particular Homogeneous differential equation ( set forcing term f(t)=0 ) x x + ζω x +ω = 0 n n Homogeneous solution: = 0, system at rest. Want nonzero. Guess: = Ae λt, A 0
4 Test (substitute): 0 = x h + ζ x h + satisfied if = d (Ae λt ) dt λ + ζ λ + + ζω d(ae λt ) + n (Ae λt ) = Ae λt (λ + ζ λ + ) dt = 0 know as characteristic equation Eigenvalues λ, λ special values of parameter λ that permit nonzero solutions : λ,λ = ζ ± (ζ ) 4 = ζ ± ζ From superposition and = Ae λt, homogeneous solution of form: e λ t + A e λ t Stability: If either λ, λ has positive real part, (λ i = Re λ i + Im λ i, Re λ i >0), Ae λ it will increase indefinitely. System unstable!
5 Eigenvalues: λ,λ = ζ ± ζ Sign of ζ determines character of solutions = Ae λt, via ζ. 3 cases:. ζ > 0, ζ real => both eigenvalues λ, λ real. Solution becomes: e λ t + A e λ t e (ζ ζ )t + A e (ζ + ζ )t Note: ζ ζ > 0, two terms of exponential decay, two time constants τ, = /λ, τ =/ λ. ζ = 0 => ζ = & λ = λ one solution: e λ t e t nd solution ( for nd order system) = A te λ t = A te t Note: x h + x h + = d (A te ωnt ) d(a + ω te ωnt ) dt n dt + (A te t ) = A te t [( )+ ( )+ ] = 0 = + e t + A te t
6 3. ζ < 0 => ζ imaginary complex eigenvalues: j = λ,λ = ζ ± j ζ e (ζ j ζ )t + A e (ζ + j ζ )t = e ζt (A e j ζ t = cosθ + jsinθ Euler s identity: e jθ Let constants be complex: A = (A R + ja I )/, A = (A R ja I )/ Apply: = e ζ t { A R + ja I + A R ja I + A e j ζ t ) [cos( ζ t)+ jsin( ζ t)]+ [cos( ζ t) jsin( ζ t)]} Rearrange: = e ζ t {A R cos( ζ t) A I sin( ζ t)} = e ζt{a R cos(ω d t) A I sin(ω d t)} Damped natural frequency: ω d = ζ
7 Particular Solution Unit step function input f(t) =f o u s (t) u s (t) 0 t Differential equation (t > 0): x + ζ x + x = f o u s (t) = f o Particular solution (guess): x p = C Test: 0 + ζ (0)+ C = f o x p = f o
8 Total solution: x = + x p. x(t) = + x p e λ t + A e λ t + f o. x(t) e t + A te t + f o 3. x(t) = e ζt{a R cos( ζ t) A I sin( ζ t)}+ f o Note: need initial conditions to determine arbitrary constants (A s) Apply: x(0) = 0, x (0) = 0 (initially at rest). 0 = x(0) + A + f o, 0 = x (0) λ + A λ 3. 0 = x(0) = A R + f o 0 = x (0) = ζ A R ζ A I Find constants, solution to step excitation: x(t) = f o f o + ζ ζ e ζt ζ e (ζ + ζ )t ζ + ζ cos( f o t [ (+ t)e ],ζ = ζ t)+ (ζ ζ )t,ζ > ζ e ωn ζ ζ sin(ω ζ t) n,0 ζ <
9 Step Response, Second Order System x f o / ζ = t System to steady state value x ss (t) = f o /. Curve depends on ζ value: small ζ or small damping => oscillation Application to Automobile Suspension: Hit a bump or t = 0: via u s (t) Displacement δ = x => rough ride, especially for small ζ Design choice for ζ?
Vibrations: Second Order Systems with One Degree of Freedom, Free Response
Single Degree of Freedom System 1.003J/1.053J Dynamics and Control I, Spring 007 Professor Thomas Peacock 5//007 Lecture 0 Vibrations: Second Order Systems with One Degree of Freedom, Free Response Single
More informationagree w/input bond => + sign disagree w/input bond => - sign
1 ME 344 REVIEW FOR FINAL EXAM LOCATION: CPE 2.204 M. D. BRYANT DATE: Wednesday, May 7, 2008 9-noon Finals week office hours: May 6, 4-7 pm Permitted at final exam: 1 sheet of formulas & calculator I.
More informationDynamics of structures
Dynamics of structures 1.2 Viscous damping Luc St-Pierre October 30, 2017 1 / 22 Summary so far We analysed the spring-mass system and found that its motion is governed by: mẍ(t) + kx(t) = 0 k y m x x
More informationMath 215/255 Final Exam (Dec 2005)
Exam (Dec 2005) Last Student #: First name: Signature: Circle your section #: Burggraf=0, Peterson=02, Khadra=03, Burghelea=04, Li=05 I have read and understood the instructions below: Please sign: Instructions:.
More informationSystems Analysis and Control
Systems Analysis and Control Matthew M. Peet Illinois Institute of Technology Lecture 8: Response Characteristics Overview In this Lecture, you will learn: Characteristics of the Response Stability Real
More informationIntroduction to Vibration. Mike Brennan UNESP, Ilha Solteira São Paulo Brazil
Introduction to Vibration Mike Brennan UNESP, Ilha Solteira São Paulo Brazil Vibration Most vibrations are undesirable, but there are many instances where vibrations are useful Ultrasonic (very high
More informationIntroduction to Vibration. Professor Mike Brennan
Introduction to Vibration Professor Mie Brennan Introduction to Vibration Nature of vibration of mechanical systems Free and forced vibrations Frequency response functions Fundamentals For free vibration
More informationAPPM 2360: Midterm exam 3 April 19, 2017
APPM 36: Midterm exam 3 April 19, 17 On the front of your Bluebook write: (1) your name, () your instructor s name, (3) your lecture section number and (4) a grading table. Text books, class notes, cell
More informationLab 11 - Free, Damped, and Forced Oscillations
Lab 11 Free, Damped, and Forced Oscillations L11-1 Name Date Partners Lab 11 - Free, Damped, and Forced Oscillations OBJECTIVES To understand the free oscillations of a mass and spring. To understand how
More informationChapter 2: Complex numbers
Chapter 2: Complex numbers Complex numbers are commonplace in physics and engineering. In particular, complex numbers enable us to simplify equations and/or more easily find solutions to equations. We
More informationDynamics of Structures: Theory and Analysis
1. Free vibrations 2. Forced vibrations 3. Transient response 4. Damping mechanisms Dynamics of Structures: Theory and Analysis Steen Krenk Technical University of Denmark 5. Modal analysis I: Basic idea
More information6.003 Homework #6 Solutions
6.3 Homework #6 Solutions Problems. Maximum gain For each of the following systems, find the frequency ω m for which the magnitude of the gain is greatest. a. + s + s ω m = w This system has poles at s
More informationForced Mechanical Vibrations
Forced Mechanical Vibrations Today we use methods for solving nonhomogeneous second order linear differential equations to study the behavior of mechanical systems.. Forcing: Transient and Steady State
More informationEven-Numbered Homework Solutions
-6 Even-Numbered Homework Solutions Suppose that the matric B has λ = + 5i as an eigenvalue with eigenvector Y 0 = solution to dy = BY Using Euler s formula, we can write the complex-valued solution Y
More informationMAT187H1F Lec0101 Burbulla
Spring 2017 Second Order Linear Homogeneous Differential Equation DE: A(x) d 2 y dx 2 + B(x)dy dx + C(x)y = 0 This equation is called second order because it includes the second derivative of y; it is
More informationNotes on the Periodically Forced Harmonic Oscillator
Notes on the Periodically orced Harmonic Oscillator Warren Weckesser Math 38 - Differential Equations 1 The Periodically orced Harmonic Oscillator. By periodically forced harmonic oscillator, we mean the
More informationForced Oscillation and Resonance
Chapter Forced Oscillation and Resonance The forced oscillation problem will be crucial to our understanding of wave phenomena Complex exponentials are even more useful for the discussion of damping and
More informationLaboratory handout 5 Mode shapes and resonance
laboratory handouts, me 34 82 Laboratory handout 5 Mode shapes and resonance In this handout, material and assignments marked as optional can be skipped when preparing for the lab, but may provide a useful
More informationEE 242 EXPERIMENT 8: CHARACTERISTIC OF PARALLEL RLC CIRCUIT BY USING PULSE EXCITATION 1
EE 242 EXPERIMENT 8: CHARACTERISTIC OF PARALLEL RLC CIRCUIT BY USING PULSE EXCITATION 1 PURPOSE: To experimentally study the behavior of a parallel RLC circuit by using pulse excitation and to verify that
More informationDr. Ian R. Manchester
Dr Ian R. Manchester Week Content Notes 1 Introduction 2 Frequency Domain Modelling 3 Transient Performance and the s-plane 4 Block Diagrams 5 Feedback System Characteristics Assign 1 Due 6 Root Locus
More informationChapter 7: Time Domain Analysis
Chapter 7: Time Domain Analysis Samantha Ramirez Preview Questions How do the system parameters affect the response? How are the parameters linked to the system poles or eigenvalues? How can Laplace transforms
More informationLaboratory handouts, ME 340
Laboratory handouts, ME 340 This document contains summary theory, solved exercises, prelab assignments, lab instructions, and report assignments for Lab 4. 2014-2016 Harry Dankowicz, unless otherwise
More informationMEG6007: Advanced Dynamics -Principles and Computational Methods (Fall, 2017) Lecture DOF Modeling of Shock Absorbers. This lecture covers:
MEG6007: Advanced Dynamics -Principles and Computational Methods (Fall, 207) Lecture 4. 2-DOF Modeling of Shock Absorbers This lecture covers: Revisit 2-DOF Spring-Mass System Understand the den Hartog
More informationElectric Circuit Theory
Electric Circuit Theory Nam Ki Min nkmin@korea.ac.kr 010-9419-2320 Chapter 8 Natural and Step Responses of RLC Circuits Nam Ki Min nkmin@korea.ac.kr 010-9419-2320 8.1 Introduction to the Natural Response
More informationSource-Free RC Circuit
First Order Circuits Source-Free RC Circuit Initial charge on capacitor q = Cv(0) so that voltage at time 0 is v(0). What is v(t)? Prof Carruthers (ECE @ BU) EK307 Notes Summer 2018 150 / 264 First Order
More informationThe Phasor Analysis Method For Harmonically Forced Linear Systems
The Phasor Analysis Method For Harmonically Forced Linear Systems Daniel S. Stutts, Ph.D. April 4, 1999 Revised: 10-15-010, 9-1-011 1 Introduction One of the most common tasks in vibration analysis is
More informationGeneral Response of Second Order System
General Response of Second Order System Slide 1 Learning Objectives Learn to analyze a general second order system and to obtain the general solution Identify the over-damped, under-damped, and critically
More informationAPPM 2360: Midterm 3 July 12, 2013.
APPM 2360: Midterm 3 July 12, 2013. ON THE FRONT OF YOUR BLUEBOOK write: (1) your name, (2) your instructor s name, (3) your recitation section number and (4) a grading table. Text books, class notes,
More informationAnswers and Hints to Review Questions for Test (a) Find the general solution to the linear system of differential equations Y = 2 ± 3i.
Answers and Hints to Review Questions for Test 3 (a) Find the general solution to the linear system of differential equations [ dy 3 Y 3 [ (b) Find the specific solution that satisfies Y (0) = (c) What
More informationSeminar 6: COUPLED HARMONIC OSCILLATORS
Seminar 6: COUPLED HARMONIC OSCILLATORS 1. Lagrangian Equations of Motion Let consider a system consisting of two harmonic oscillators that are coupled together. As a model, we will use two particles attached
More informationChapter 8: Frequency Domain Analysis
Chapter 8: Frequency Domain Analysis Samantha Ramirez Preview Questions 1. What is the steady-state response of a linear system excited by a cyclic or oscillatory input? 2. How does one characterize the
More informationMath 304 Answers to Selected Problems
Math Answers to Selected Problems Section 6.. Find the general solution to each of the following systems. a y y + y y y + y e y y y y y + y f y y + y y y + 6y y y + y Answer: a This is a system of the
More informationDifferential Equations
Differential Equations A differential equation (DE) is an equation which involves an unknown function f (x) as well as some of its derivatives. To solve a differential equation means to find the unknown
More informationMCE 366 System Dynamics, Spring Problem Set 2. Solutions to Set 2
MCE 366 System Dynamics, Spring 2012 Problem Set 2 Reading: Chapter 2, Sections 2.3 and 2.4, Chapter 3, Sections 3.1 and 3.2 Problems: 2.22, 2.24, 2.26, 2.31, 3.4(a, b, d), 3.5 Solutions to Set 2 2.22
More informationFinish up undetermined coefficients (on the midterm, on WW3) Physics applications - mass springs (not on midterm, on WW4)
Today Midterm 1 - Jan 31 (one week away!) Finish up undetermined coefficients (on the midterm, on WW3) Physics applications - mass springs (not on midterm, on WW4) Undamped, over/under/critically damped
More information2.010 Fall 2000 Solution of Homework Assignment 7
. Fall Solution of Homework Assignment 7. Control of Hydraulic Servomechanism. We return to the Hydraulic Servomechanism of Problem in Homework Assignment 6 with additional data which permits quantitative
More information2. Determine whether the following pair of functions are linearly dependent, or linearly independent:
Topics to be covered on the exam include: Recognizing, and verifying solutions to homogeneous second-order linear differential equations, and their corresponding Initial Value Problems Recognizing and
More informationThe Harmonic Oscillator
The Harmonic Oscillator Math 4: Ordinary Differential Equations Chris Meyer May 3, 008 Introduction The harmonic oscillator is a common model used in physics because of the wide range of problems it can
More informationChapter 4 Transients. Chapter 4 Transients
Chapter 4 Transients Chapter 4 Transients 1. Solve first-order RC or RL circuits. 2. Understand the concepts of transient response and steady-state response. 1 3. Relate the transient response of first-order
More informationMath 216 Second Midterm 28 March, 2013
Math 26 Second Midterm 28 March, 23 This sample exam is provided to serve as one component of your studying for this exam in this course. Please note that it is not guaranteed to cover the material that
More informationDiscrete Systems. Step response and pole locations. Mark Cannon. Hilary Term Lecture
Discrete Systems Mark Cannon Hilary Term 22 - Lecture 4 Step response and pole locations 4 - Review Definition of -transform: U() = Z{u k } = u k k k= Discrete transfer function: Y () U() = G() = Z{g k},
More informationControl of Manufacturing Processes
Control of Manufacturing Processes Subject 2.830 Spring 2004 Lecture #19 Position Control and Root Locus Analysis" April 22, 2004 The Position Servo Problem, reference position NC Control Robots Injection
More informationExercises Lecture 15
AM1 Mathematical Analysis 1 Oct. 011 Feb. 01 Date: January 7 Exercises Lecture 15 Harmonic Oscillators In classical mechanics, a harmonic oscillator is a system that, when displaced from its equilibrium
More informationChapter 5 Design. D. J. Inman 1/51 Mechanical Engineering at Virginia Tech
Chapter 5 Design Acceptable vibration levels (ISO) Vibration isolation Vibration absorbers Effects of damping in absorbers Optimization Viscoelastic damping treatments Critical Speeds Design for vibration
More informationOrdinary differential equations
Class 11 We will address the following topics Convolution of functions Consider the following question: Suppose that u(t) has Laplace transform U(s), v(t) has Laplace transform V(s), what is the inverse
More informationDamped & forced oscillators
SEISMOLOGY I Laurea Magistralis in Physics of the Earth and of the Environment Damped & forced oscillators Fabio ROMANELLI Dept. Earth Sciences Università degli studi di Trieste romanel@dst.units.it Damped
More informationResonance and response
Chapter 2 Resonance and response Last updated September 20, 2008 In this section of the course we begin with a very simple system a mass hanging from a spring and see how some remarkable ideas emerge.
More information6.003 Homework #6. Problems. Due at the beginning of recitation on October 19, 2011.
6.003 Homework #6 Due at the beginning of recitation on October 19, 2011. Problems 1. Maximum gain For each of the following systems, find the frequency ω m for which the magnitude of the gain is greatest.
More informationCopyright (c) 2006 Warren Weckesser
2.2. PLANAR LINEAR SYSTEMS 3 2.2. Planar Linear Systems We consider the linear system of two first order differential equations or equivalently, = ax + by (2.7) dy = cx + dy [ d x x = A x, where x =, and
More information1. (10 points) Find the general solution to the following second-order differential equation:
Math 307A, Winter 014 Midterm Solutions Page 1 of 8 1. (10 points) Find the general solution to the following second-order differential equation: 4y 1y + 9y = 9t. To find the general solution to this nonhomogeneous
More informationDON T PANIC! If you get stuck, take a deep breath and go on to the next question. Come back to the question you left if you have time at the end.
Math 307, Midterm 2 Winter 2013 Name: Instructions. DON T PANIC! If you get stuck, take a deep breath and go on to the next question. Come back to the question you left if you have time at the end. There
More informationChapter 14 Oscillations. Copyright 2009 Pearson Education, Inc.
Chapter 14 Oscillations Oscillations of a Spring Simple Harmonic Motion Energy in the Simple Harmonic Oscillator Simple Harmonic Motion Related to Uniform Circular Motion The Simple Pendulum The Physical
More informationLOPE3202: Communication Systems 10/18/2017 2
By Lecturer Ahmed Wael Academic Year 2017-2018 LOPE3202: Communication Systems 10/18/2017 We need tools to build any communication system. Mathematics is our premium tool to do work with signals and systems.
More informationSelected Topics in Physics a lecture course for 1st year students by W.B. von Schlippe Spring Semester 2007
Selected Topics in Physics a lecture course for st year students by W.B. von Schlippe Spring Semester 7 Lecture : Oscillations simple harmonic oscillations; coupled oscillations; beats; damped oscillations;
More informationModeling and Experimentation: Mass-Spring-Damper System Dynamics
Modeling and Experimentation: Mass-Spring-Damper System Dynamics Prof. R.G. Longoria Department of Mechanical Engineering The University of Texas at Austin July 20, 2014 Overview 1 This lab is meant to
More informationOutline of parts 1 and 2
to Harmonic Loading http://intranet.dica.polimi.it/people/boffi-giacomo Dipartimento di Ingegneria Civile Ambientale e Territoriale Politecnico di Milano March, 6 Outline of parts and of an Oscillator
More informationLecture 9: Harmonic Loads (Con t)
Lecture 9: Harmonic Loads (Con t) Reading materials: Sections 3.4, 3.5, 3.6 and 3.7 1. Resonance The dynamic load magnification factor (DLF) The peak dynamic magnification occurs near r=1 for small damping
More informationSecond order linear equations
Second order linear equations Samy Tindel Purdue University Differential equations - MA 266 Taken from Elementary differential equations by Boyce and DiPrima Samy T. Second order equations Differential
More informationCircuits with Capacitor and Inductor
Circuits with Capacitor and Inductor We have discussed so far circuits only with resistors. While analyzing it, we came across with the set of algebraic equations. Hereafter we will analyze circuits with
More informationAcoustics-An An Overview. Lecture 1. Vibro-Acoustics. What? Why? How? Lecture 1
Vibro-Acoustics Acoustics-An An Overview 1 Vibro-Acoustics What? Why? How? 2 Linear Non-Linear Force Motion Arbitrary motion Harmonic Motion Mechanical Vibrations Sound (Acoustics) 3 Our heart beat, our
More informationForced Oscillations in a Linear System Problems
Forced Oscillations in a Linear System Problems Summary of the Principal Formulas The differential equation of forced oscillations for the kinematic excitation: ϕ + 2γ ϕ + ω 2 0ϕ = ω 2 0φ 0 sin ωt. Steady-state
More informationMath 216 Second Midterm 16 November, 2017
Math 216 Second Midterm 16 November, 2017 This sample exam is provided to serve as one component of your studying for this exam in this course. Please note that it is not guaranteed to cover the material
More informationC R. Consider from point of view of energy! Consider the RC and LC series circuits shown:
ircuits onsider the R and series circuits shown: ++++ ---- R ++++ ---- Suppose that the circuits are formed at t with the capacitor charged to value. There is a qualitative difference in the time development
More informationMechanics IV: Oscillations
Mechanics IV: Oscillations Chapter 4 of Morin covers oscillations, including damped and driven oscillators in detail. Also see chapter 10 of Kleppner and Kolenkow. For more on normal modes, see any book
More informationA Guide to linear dynamic analysis with Damping
A Guide to linear dynamic analysis with Damping This guide starts from the applications of linear dynamic response and its role in FEA simulation. Fundamental concepts and principles will be introduced
More informationIdentification Methods for Structural Systems. Prof. Dr. Eleni Chatzi Lecture March, 2016
Prof. Dr. Eleni Chatzi Lecture 4-09. March, 2016 Fundamentals Overview Multiple DOF Systems State-space Formulation Eigenvalue Analysis The Mode Superposition Method The effect of Damping on Structural
More informationMATH 24 EXAM 3 SOLUTIONS
MATH 4 EXAM 3 S Consider the equation y + ω y = cosω t (a) Find the general solution of the homogeneous equation (b) Find the particular solution of the non-homogeneous equation using the method of Undetermined
More informationLinear Differential Equations. Problems
Chapter 1 Linear Differential Equations. Problems 1.1 Introduction 1.1.1 Show that the function ϕ : R R, given by the expression ϕ(t) = 2e 3t for all t R, is a solution of the Initial Value Problem x =
More informationEQUIVALENT SINGLE-DEGREE-OF-FREEDOM SYSTEM AND FREE VIBRATION
1 EQUIVALENT SINGLE-DEGREE-OF-FREEDOM SYSTEM AND FREE VIBRATION The course on Mechanical Vibration is an important part of the Mechanical Engineering undergraduate curriculum. It is necessary for the development
More informationUnderstand the existence and uniqueness theorems and what they tell you about solutions to initial value problems.
Review Outline To review for the final, look over the following outline and look at problems from the book and on the old exam s and exam reviews to find problems about each of the following topics.. Basics
More informationFigure XP3.1 (a) Mass in equilibrium, (b) Freebody diagram, (c) Kinematic constraint relation Example Problem 3.1 Figure XP3.1 illustrates a mass m
LECTURE 7. MORE VIBRATIONS ` Figure XP3.1 (a) Mass in equilibrium, (b) Freebody diagram, (c) Kinematic constraint relation Example Problem 3.1 Figure XP3.1 illustrates a mass m that is in equilibrium and
More informationLinear Second Order ODEs
Chapter 3 Linear Second Order ODEs In this chapter we study ODEs of the form (3.1) y + p(t)y + q(t)y = f(t), where p, q, and f are given functions. Since there are two derivatives, we might expect that
More informationControl of Manufacturing Processes
Control of Manufacturing Processes Subject 2.830 Spring 2004 Lecture #18 Basic Control Loop Analysis" April 15, 2004 Revisit Temperature Control Problem τ dy dt + y = u τ = time constant = gain y ss =
More informationDynamic Response. Assoc. Prof. Enver Tatlicioglu. Department of Electrical & Electronics Engineering Izmir Institute of Technology.
Dynamic Response Assoc. Prof. Enver Tatlicioglu Department of Electrical & Electronics Engineering Izmir Institute of Technology Chapter 3 Assoc. Prof. Enver Tatlicioglu (EEE@IYTE) EE362 Feedback Control
More informationPractice Problems For Test 3
Practice Problems For Test 3 Power Series Preliminary Material. Find the interval of convergence of the following. Be sure to determine the convergence at the endpoints. (a) ( ) k (x ) k (x 3) k= k (b)
More informationChapter 3. 1 st Order Sine Function Input. General Solution. Ce t. Measurement System Behavior Part 2
Chapter 3 Measurement System Behavior Part 2 1 st Order Sine Function Input Examples of Periodic: vibrating structure, vehicle suspension, reciprocating pumps, environmental conditions The frequency of
More informationOften, in this class, we will analyze a closed-loop feedback control system, and end up with an equation of the form
ME 32, Spring 25, UC Berkeley, A. Packard 55 7 Review of SLODEs Throughout this section, if y denotes a function (of time, say), then y [k or y (k) denotes the k th derivative of the function y, y [k =
More informationSolutions for homework 5
1 Section 4.3 Solutions for homework 5 17. The following equation has repeated, real, characteristic roots. Find the general solution. y 4y + 4y = 0. The characteristic equation is λ 4λ + 4 = 0 which has
More informationMA 266 Review Topics - Exam # 2 (updated)
MA 66 Reiew Topics - Exam # updated Spring First Order Differential Equations Separable, st Order Linear, Homogeneous, Exact Second Order Linear Homogeneous with Equations Constant Coefficients The differential
More informationReview: transient and steady-state response; DC gain and the FVT Today s topic: system-modeling diagrams; prototype 2nd-order system
Plan of the Lecture Review: transient and steady-state response; DC gain and the FVT Today s topic: system-modeling diagrams; prototype 2nd-order system Plan of the Lecture Review: transient and steady-state
More informationPractice Problems For Test 3
Practice Problems For Test 3 Power Series Preliminary Material. Find the interval of convergence of the following. Be sure to determine the convergence at the endpoints. (a) ( ) k (x ) k (x 3) k= k (b)
More informationChapter 14 Oscillations. Copyright 2009 Pearson Education, Inc.
Chapter 14 Oscillations 14-1 Oscillations of a Spring If an object vibrates or oscillates back and forth over the same path, each cycle taking the same amount of time, the motion is called periodic. The
More informationFirst and Second Order Circuits. Claudio Talarico, Gonzaga University Spring 2015
First and Second Order Circuits Claudio Talarico, Gonzaga University Spring 2015 Capacitors and Inductors intuition: bucket of charge q = Cv i = C dv dt Resist change of voltage DC open circuit Store voltage
More information4.2 Homogeneous Linear Equations
4.2 Homogeneous Linear Equations Homogeneous Linear Equations with Constant Coefficients Consider the first-order linear differential equation with constant coefficients a 0 and b. If f(t) = 0 then this
More informationPhysics 351 Monday, January 22, 2018
Physics 351 Monday, January 22, 2018 Phys 351 Work on this while you wait for your classmates to arrive: Show that the moment of inertia of a uniform solid sphere rotating about a diameter is I = 2 5 MR2.
More informationClassical Mechanics Phys105A, Winter 2007
Classical Mechanics Phys5A, Winter 7 Wim van Dam Room 59, Harold Frank Hall vandam@cs.ucsb.edu http://www.cs.ucsb.edu/~vandam/ Phys5A, Winter 7, Wim van Dam, UCSB Midterm New homework has been announced
More informationMath Lab 9 23 March 2017 unid:
Math 2250-004 Lab 9 23 March 2017 unid: Name: Instructions and due date: Due: 30 March 2017 at the start of lab. If extra paper is necessary, please staple it at the end of the packet. For full credit:
More informationMATH 23 Exam 2 Review Solutions
MATH 23 Exam 2 Review Solutions Problem 1. Use the method of reduction of order to find a second solution of the given differential equation x 2 y (x 0.1875)y = 0, x > 0, y 1 (x) = x 1/4 e 2 x Solution
More information09/29/2009 Reading: Hambley Chapter 5 and Appendix A
EE40 Lec 10 Complex Numbers and Phasors Prof. Nathan Cheung 09/29/2009 Reading: Hambley Chapter 5 and Appendix A Slide 1 OUTLINE Phasors as notation for Sinusoids Arithmetic with Complex Numbers Complex
More informationSystems Analysis and Control
Systems Analysis and Control Matthew M. Peet Arizona State University Lecture 8: Response Characteristics Overview In this Lecture, you will learn: Characteristics of the Response Stability Real Poles
More informationLinear Systems. Chapter Basic Definitions
Chapter 5 Linear Systems Few physical elements display truly linear characteristics. For example the relation between force on a spring and displacement of the spring is always nonlinear to some degree.
More informationNotes for ECE-320. Winter by R. Throne
Notes for ECE-3 Winter 4-5 by R. Throne Contents Table of Laplace Transforms 5 Laplace Transform Review 6. Poles and Zeros.................................... 6. Proper and Strictly Proper Transfer Functions...................
More informationChapter 14 Oscillations
Chapter 14 Oscillations If an object vibrates or oscillates back and forth over the same path, each cycle taking the same amount of time, the motion is called periodic. The mass and spring system is a
More informationLinear Control Systems Solution to Assignment #1
Linear Control Systems Solution to Assignment # Instructor: H. Karimi Issued: Mehr 0, 389 Due: Mehr 8, 389 Solution to Exercise. a) Using the superposition property of linear systems we can compute the
More informationMATH 251 Week 6 Not collected, however you are encouraged to approach all problems to prepare for exam
MATH 51 Week 6 Not collected, however you are encouraged to approach all problems to prepare for exam A collection of previous exams could be found at the coordinator s web: http://www.math.psu.edu/tseng/class/m51samples.html
More informationSTABILITY. Have looked at modeling dynamic systems using differential equations. and used the Laplace transform to help find step and impulse
SIGNALS AND SYSTEMS: PAPER 3C1 HANDOUT 4. Dr David Corrigan 1. Electronic and Electrical Engineering Dept. corrigad@tcd.ie www.sigmedia.tv STABILITY Have looked at modeling dynamic systems using differential
More information4. Complex Oscillations
4. Complex Oscillations The most common use of complex numbers in physics is for analyzing oscillations and waves. We will illustrate this with a simple but crucially important model, the damped harmonic
More informationDynamic Behavior. Chapter 5
1 Dynamic Behavior In analyzing process dynamic and process control systems, it is important to know how the process responds to changes in the process inputs. A number of standard types of input changes
More informationDynamic circuits: Frequency domain analysis
Electronic Circuits 1 Dynamic circuits: Contents Free oscillation and natural frequency Transfer functions Frequency response Bode plots 1 System behaviour: overview 2 System behaviour : review solution
More information12.1. Exponential shift. The calculation (10.1)
62 12. Resonance and the exponential shift law 12.1. Exponential shift. The calculation (10.1) (1) p(d)e = p(r)e extends to a formula for the effect of the operator p(d) on a product of the form e u, where
More information