Chapter 12 Elastic Stability of Columns
|
|
- Mercy Banks
- 5 years ago
- Views:
Transcription
1 Chapter 12 Elastic Stability of Columns Axial compressive loads can cause a sudden lateral deflection (Buckling) For columns made of elastic-perfectly plastic materials, P cr Depends primarily on E and I Independent of s yield and s ult For columns made of elastic strainhardening material, P cr Will also depend on the inelastic stress-strain behavior 1 Ideal column Perfectly straight Load lies exactly along central longitudinal axis Weightless Free of residual stresses Not subject to a bending moment or a lateral force 2 1
2 1. Introduce some basic concepts of column buckling 2. Physical description of the elastic buckling of columns a. For a range of lateral deflections b. For both ideal and imperfect slender columns 3. Derive Euler formula for a pin-pin column 4. Examine the effect of constraints 5. Investigate Local Buckling of thin-wall flanges of elastic columns with open cross sections Introduction to the Concept of Column Buckling When an initially straight, slender column with pinned ends is subject to a compressive load P, failure occurs by elastic buckling when P = P cr P cr = π2 EI L 2 (12.1) When an ideal column has P < P cr, Column remains straight A lateral force will cause the beam to move laterally, but beam will return to straight position upon removal of the force Stable Equilibrium When an ideal column has P = P cr, Column can be freely moved laterally and remain displaced after removal of the lateral load Neutral Equilibrium When an ideal column has P > P cr Unstable 4 2
3 Magnitude of the buckling load is a function of the boundary conditions Buckling is governed by the SMALLEST area moment of inertia Real materials experience: plastic collapse or fracture (unrestrained lateral displacements) jamming in assembly (restrained lateral displacements) Deflection Response of Columns to Compressive Loads Elastic Buckling of an Ideal Slender Column Consider a straight slender pinned-end column made of a homogeneous material Load the column to P cr Lateral deflection is represented by Curve 0AB in Fig. 12.3a Fig Relation between load and lateral deflection for columns 6 3
4 P cr = π2 EI, σ L 2 cr = P cr A = π2 E L r where r is the radius of gyration (r 2 = I/A) L/r is the slenderness ratio For elastic behavior, s cr < s yield 2 (12.2) Fig Relation between load and lateral deflection for columns 7 Large Deflections Southwell (1941) showed that a very slender column can sustain a load greater than P cr in a bent position Provided the average s < s yield The load-deflection response is similar to curves BCD For a real column, the s yield is exceeded at some value C due to axial and bending stresses Fig Relation between load and lateral deflection for columns 8 4
5 By elementary beam theory: M x = EI R(x) (12.4) From calculus: 1 R = ± d2y dx 2 1+ dy dx 2 3/2 ± d2 y dx 2 (12.5) From Eqs and 12.5: M x By Eqs (M x by EI: where = ±EI d2 y dx 2 (12.6) = Py) and 12.6 after dividing d 2 y dx 2 + k2 y = 0 (12.7) k 2 = P EI (12.8) Fig Column with pinned ends The Euler Formula for Columns with Pinned Ends Five methods: 1. Equilibrium 2. Imperfection 3. Energy 4. Snap through (more significant in buckling of shells than of beams) 5. Vibration (beyond scope of course) The Equilibrium Method By equilibrium of moments about Point A: M A = 0 = M x + Py M x = Py (12.3) Eq represents a state of neutral equilibrium Fig. 12.4/5 Column with pinned 10 ends and FBD of lower portion 5
6 Fig Sign convention for internal moment. (a) Positive moment taken CW. (b) Positive moment taken CCW. 11 The b.c. s associated with Eq are: y = 0, for x = 0, L (12.9) For arbitrary values of k, Eq s and 12.9 admit only the trivial solution y = 0. However, nontrivial solutions exist for specific values (eigenvalues) of k. The general solutions to Eq. 12.7: y = A sin kx + B cos kx (12.10) where A and B are constants determined from the boundary conditions in Eq Thus, from Eq : A sin kl = 0, B = 0 (12.11) For a nontrivial solution (A 0), Eq requires that kl = 0, 2 or: k = P EI = nπ, n = 1, 2, 3, L For each value of n, by Eq , there exists a nontrivial solution (eigenfunction): y = A n sin nπx L (12.13) 12 6
7 From Eq , the corresponding Euler loads are: P = n2 π 2 EI L 2, n = 1, 2, 3, (12.14) The minimum P occurs for n = 1. This load is the smallest load for which a nontrivial solution is possible the critical load for the column. By 12.12/12.14, with n = 1: P = π2 EI L 2 = P cr (12.15) Euler formula for buckling of a column with pinned ends. The buckled shape of the column is determined from Eq with n = 1 : y = A 1 sin πx (12.16) L But, A 1 is indeterminate. The maximum amplitude of the buckled column cannot be determined by this approach. A 1 must be determined by the theory of elasticity Higher Buckling Loads; n >1 Higher buckling loads than P cr are possible if the lower modes are constrained By Eq for n=2 P = 4 π2 EI L 2 By Eq for n=2 P = 9 π2 EI L 2 In general: P = n 2 π2 EI L 2 = 4P cr, σ cr(2) = P A = 4 π2 E L r = 9P cr, σ cr(3) = P A = 9 π2 E L r = n 2 P cr, σ cr(n0) = P A = n2 π2 E 2 2 (12.17) (12.18) L r 2 (12.19) In practice, n=1 is the most significant. Fig Buckling modes: n=1, 2,
8
9
10 Imperfect Slender Columns Real columns nearly always possess deviations from ideal conditions Unless a column is extremely slender, it will fail by yielding or fracture before failing by large lateral deflections An imperfect column may be considered as a perfect column with an eccentricity, e For small e, 0 B FG represents the Load-d curve (max load close to P cr ) For large e, 0 B IJ represents the Load-d curve (max load can be much lower than P cr ) Fig Relation between load and lateral deflection for columns 20 10
11 Failure of Columns of Intermediate Slenderness Ratio The load-d relations for columns of intermediate slender ratios are represented by the curves in Fig. 12.3c For such columns, a condition of instability is associated with Points B, F and I At these points, inelastic strain occurs and is followed, after only a small increase in load, by instability collapse at relatively small lateral deflections Fig Relation between load and lateral deflection for columns 21 Which Type of Failure Occurs? Two potential types of failures 1. Failure by excessive deflection before plastic collapse or fracture 2. Failure by plastic collapse or fracture Pure analytical approach is difficult Empirical methods are usually used in conjunction with analysis to develop workable design criteria Fig Relation between load and lateral deflection for columns 22 11
12 The Imperfection Method Acknowledge that a real column is usually loaded eccentrically, e Hence, the Imperfection Method is a generalization of the Equilibrium Method By equilibrium of moments about Point A M A = 0 = M x + Pe x L + Py M x = Pe x L Py Fig Eccentrically loaded pinned-end columns 23 M x = Pe x L Py (12.20) Recall, 12.6: M x = ±EI d2 y dx 2 Thus, M x = +EI d2 y = Pe x Py (12.20) dx 2 L Dividing by EI and recalling: k 2 = P EI gives: d 2 y + dx 2 k2 y = k2 ex L (12.21) The b.c. s are: y = 0 for x = 0, L (12.22) Giving the general solution of Eq : y = A sin kx + B cos kx ex (12.23) L where A and B are constants determined by the boundary conditions. Hence, from Eq. s and 12.23: y = e sin(kx) sin(kl) x L (12.24) 24 12
13 Rewriting 12.24: y = e sin(kx) sin(kl) x L (12.24) As the load P increases, the deflection of the column increases When sin(kl) = 0 for kl=np, n=1,2,3,, y The Imperfection Method gives the same result as the Equilibrium Method The Energy Method The Energy Method is based on the first law of thermodynamics The work that external forces perform on a system plus the heat energy that flows into the system equals the increase in internal energy of the system plus the increase in the kinetic energy of the system: δw + δh = δu + δk (12.25) For column buckling, assuming an adiabatic system δh = 0 If beam is disturbed laterally, then it may vibrate, but δk << δw Implies δw = δu (12.26) Can solve the problem using the Rayleigh method by reducing the problem to a single DOF, e.g. y(x) = A sin(p x / L) A more general form is to use a Fourier series: y x = a n sin nπx (12.27) L Eq satisfies the BCs x=0 and x=l 26 13
14
15 (12.33)
16 Determine the Euler load for the column shown in Figure 12.8c. See the discussion on the imperfection method in Section Fig. 12.8c
17 Euler Buckling of Columns with Linear Elastic End Constraints Consider a straight elastic column with linear elastic end constraints Apply an axial force P The potential energy of the column-spring system is (12.34) The displaced equilibrium position of the column is given by the principle of stationary potential energy Fig Elastic column with linear elastic end constraints 34 17
18 By Eq , set dv=0 Eq is the Euler equation for the column Eq are the BCs (Includes both the natural (e.g. y =0 implies no moment at a pin) and forced (specified, e.g. y=0 at ends) BCs) 35 (12.40) 36 18
19 If any of the end displacements (y 1,y 2 ) and the end slopes (y 1, y 2 ) of the column are forced (given), then they are not arbitrary and the associated variations must vanish These specified conditions are called forced BCs (also called geometric, kinematic, or essential BCs) e.g., for pinned ends y 1 x=0 and y 2 x=l Therefore, dy 1 =dy 2 =0 Then the last two of Eqs are identically satisfied The first two of Eqs yield the natural (unforced) BCs for the pinned ends Because y 1 and y 2 and hence dy 1 and dy 2 are arbitrary (i.e. nonzero) Also for the pinned ends K 1 =K 2 =0 Therefore, Eqs give the natural BCs (because EI>0) y 1 = y 2 = 0 (12.42) Eqs , and yield B = C = D = 0 and A sin KL = 0, i.e. the result P cr =p 2 EI/L 2 37 For specific values of K 1, K 2, k 1 and k 2 that are neither zero nor infinity The buckling load is obtained by setting the determinate D of the coefficients A, B, C and D in Eq Usually must be solved numerically 38 19
20
21
22
23 12.5 Local Buckling of Columns Consider a column that is formed with several thin-wall parts e.g., a channel, an angle or a wide-flange I-beam Depending on the relative cross-sectional dimensions of a flange or web Such a column may fail by local buckling of the flange or web, before it fails as an Euler column 45 Consider the example If the ratio t/b is relatively large, the column buckles as an Euler column (global buckling) If t/b is relatively small, the column fails by buckling or wrinkling, or more generally, Local Buckling 46 23
24 Local buckling of a compressed thin-wall column may not cause immediate collapse of the column. However, It alters the stress distribution in the system Reduces the compressive stiffness of the column Generally leads to collapse at loads lower than the Euler P cr In the design of columns in building structures using hot-rolled steel, local buckling is controlled by selecting cross sections with t/b ratios s.t. the critical stress for local buckling will exceed the s yield of the material Therefore, local buckling will not occur before the material yields Local buckling is controlled in cold-formed steel members by the use of effective widths of the various compression elements (i.e., leg of an angle or flange of a channel) which will account for the relatively small t/b ratio. These effective widths are then used to compute effective (reduced) crosssection properties, A, I and so forth
25 Fig Buckling loads for local buckling and Euler buckling for columns made of 245 TR aluminum (E=74.5 GPa)
26
27
Mechanical Design in Optical Engineering
OPTI Buckling Buckling and Stability: As we learned in the previous lectures, structures may fail in a variety of ways, depending on the materials, load and support conditions. We had two primary concerns:
More informationEMA 3702 Mechanics & Materials Science (Mechanics of Materials) Chapter 10 Columns
EMA 370 Mechanics & Materials Science (Mechanics of Materials) Chapter 10 Columns Columns Introduction Columns are vertical prismatic members subjected to compressive forces Goals: 1. Study the stability
More informationneeded to buckle an ideal column. Analyze the buckling with bending of a column. Discuss methods used to design concentric and eccentric columns.
CHAPTER OBJECTIVES Discuss the behavior of columns. Discuss the buckling of columns. Determine the axial load needed to buckle an ideal column. Analyze the buckling with bending of a column. Discuss methods
More informationCritical Load columns buckling critical load
Buckling of Columns Buckling of Columns Critical Load Some member may be subjected to compressive loadings, and if these members are long enough to cause the member to deflect laterally or sideway. To
More informationCompression Members. ENCE 455 Design of Steel Structures. III. Compression Members. Introduction. Compression Members (cont.)
ENCE 455 Design of Steel Structures III. Compression Members C. C. Fu, Ph.D., P.E. Civil and Environmental Engineering Department University of Maryland Compression Members Following subjects are covered:
More informationENCE 455 Design of Steel Structures. III. Compression Members
ENCE 455 Design of Steel Structures III. Compression Members C. C. Fu, Ph.D., P.E. Civil and Environmental Engineering Department University of Maryland Compression Members Following subjects are covered:
More informationMODULE C: COMPRESSION MEMBERS
MODULE C: COMPRESSION MEMBERS This module of CIE 428 covers the following subjects Column theory Column design per AISC Effective length Torsional and flexural-torsional buckling Built-up members READING:
More informationUnit III Theory of columns. Dr.P.Venkateswara Rao, Associate Professor, Dept. of Civil Engg., SVCE, Sriperumbudir
Unit III Theory of columns 1 Unit III Theory of Columns References: Punmia B.C.,"Theory of Structures" (SMTS) Vol II, Laxmi Publishing Pvt Ltd, New Delhi 2004. Rattan.S.S., "Strength of Materials", Tata
More informationSECTION 7 DESIGN OF COMPRESSION MEMBERS
SECTION 7 DESIGN OF COMPRESSION MEMBERS 1 INTRODUCTION TO COLUMN BUCKLING Introduction Elastic buckling of an ideal column Strength curve for an ideal column Strength of practical column Concepts of effective
More informationStructural Mechanics Column Behaviour
Structural Mechanics Column Behaviour 008/9 Dr. Colin Caprani, 1 Contents 1. Introduction... 3 1.1 Background... 3 1. Stability of Equilibrium... 4. Buckling Solutions... 6.1 Introduction... 6. Pinned-Pinned
More information7.5 Elastic Buckling Columns and Buckling
7.5 Elastic Buckling The initial theory of the buckling of columns was worked out by Euler in 1757, a nice example of a theory preceding the application, the application mainly being for the later invented
More informationLecture Slides. Chapter 4. Deflection and Stiffness. The McGraw-Hill Companies 2012
Lecture Slides Chapter 4 Deflection and Stiffness The McGraw-Hill Companies 2012 Chapter Outline Force vs Deflection Elasticity property of a material that enables it to regain its original configuration
More informationto introduce the principles of stability and elastic buckling in relation to overall buckling, local buckling
to introduce the principles of stability and elastic buckling in relation to overall buckling, local buckling In the case of elements subjected to compressive forces, secondary bending effects caused by,
More information9.1 Introduction to bifurcation of equilibrium and structural
Module 9 Stability and Buckling Readings: BC Ch 14 earning Objectives Understand the basic concept of structural instability and bifurcation of equilibrium. Derive the basic buckling load of beams subject
More informationChapter 4 Deflection and Stiffness
Chapter 4 Deflection and Stiffness Asst. Prof. Dr. Supakit Rooppakhun Chapter Outline Deflection and Stiffness 4-1 Spring Rates 4-2 Tension, Compression, and Torsion 4-3 Deflection Due to Bending 4-4 Beam
More informationUnit 18 Other Issues In Buckling/Structural Instability
Unit 18 Other Issues In Buckling/Structural Instability Readings: Rivello Timoshenko Jones 14.3, 14.5, 14.6, 14.7 (read these at least, others at your leisure ) Ch. 15, Ch. 16 Theory of Elastic Stability
More informationME 354, MECHANICS OF MATERIALS LABORATORY COMPRESSION AND BUCKLING
ME 354, MECHANICS OF MATERIALS LABATY COMPRESSION AND BUCKLING PURPOSE 01 January 2000 / mgj The purpose of this exercise is to study the effects of end conditions, column length, and material properties
More informationLaboratory 4 Topic: Buckling
Laboratory 4 Topic: Buckling Objectives: To record the load-deflection response of a clamped-clamped column. To identify, from the recorded response, the collapse load of the column. Introduction: Buckling
More informationInfluence of residual stresses in the structural behavior of. tubular columns and arches. Nuno Rocha Cima Gomes
October 2014 Influence of residual stresses in the structural behavior of Abstract tubular columns and arches Nuno Rocha Cima Gomes Instituto Superior Técnico, Universidade de Lisboa, Portugal Contact:
More informationDesign of Steel Structures Prof. S.R.Satish Kumar and Prof. A.R.Santha Kumar
5.4 Beams As stated previousl, the effect of local buckling should invariabl be taken into account in thin walled members, using methods described alread. Laterall stable beams are beams, which do not
More informationCOLUMNS: BUCKLING (DIFFERENT ENDS)
COLUMNS: BUCKLING (DIFFERENT ENDS) Buckling of Long Straight Columns Example 4 Slide No. 1 A simple pin-connected truss is loaded and supported as shown in Fig. 1. All members of the truss are WT10 43
More informationMarch 24, Chapter 4. Deflection and Stiffness. Dr. Mohammad Suliman Abuhaiba, PE
Chapter 4 Deflection and Stiffness 1 2 Chapter Outline Spring Rates Tension, Compression, and Torsion Deflection Due to Bending Beam Deflection Methods Beam Deflections by Superposition Strain Energy Castigliano
More informationMechanics of Materials Primer
Mechanics of Materials rimer Notation: A = area (net = with holes, bearing = in contact, etc...) b = total width of material at a horizontal section d = diameter of a hole D = symbol for diameter E = modulus
More information7.6 Stress in symmetrical elastic beam transmitting both shear force and bending moment
7.6 Stress in symmetrical elastic beam transmitting both shear force and bending moment à It is more difficult to obtain an exact solution to this problem since the presence of the shear force means that
More informationAccordingly, the nominal section strength [resistance] for initiation of yielding is calculated by using Equation C-C3.1.
C3 Flexural Members C3.1 Bending The nominal flexural strength [moment resistance], Mn, shall be the smallest of the values calculated for the limit states of yielding, lateral-torsional buckling and distortional
More informationMechanics of Materials II. Chapter III. A review of the fundamental formulation of stress, strain, and deflection
Mechanics of Materials II Chapter III A review of the fundamental formulation of stress, strain, and deflection Outline Introduction Assumtions and limitations Axial loading Torsion of circular shafts
More informationChapter 5 Compression Member
Chapter 5 Compression Member This chapter starts with the behaviour of columns, general discussion of buckling, and determination of the axial load needed to buckle. Followed b the assumption of Euler
More informationChapter 6: Cross-Sectional Properties of Structural Members
Chapter 6: Cross-Sectional Properties of Structural Members Introduction Beam design requires the knowledge of the following. Material strengths (allowable stresses) Critical shear and moment values Cross
More informationUNIT- I Thin plate theory, Structural Instability:
UNIT- I Thin plate theory, Structural Instability: Analysis of thin rectangular plates subject to bending, twisting, distributed transverse load, combined bending and in-plane loading Thin plates having
More informationLecture 15 Strain and stress in beams
Spring, 2019 ME 323 Mechanics of Materials Lecture 15 Strain and stress in beams Reading assignment: 6.1 6.2 News: Instructor: Prof. Marcial Gonzalez Last modified: 1/6/19 9:42:38 PM Beam theory (@ ME
More informationMECHANICS OF MATERIALS
CHTER MECHNICS OF MTERILS 10 Ferdinand. Beer E. Russell Johnston, Jr. Columns John T. DeWolf cture Notes: J. Walt Oler Texas Tech University 006 The McGraw-Hill Companies, Inc. ll rights reserved. Columns
More informationElastic Stability Of Columns
Elastic Stability Of Columns Introduction: Structural members which carry compressive loads may be divided into two broad categories depending on their relative lengths and cross-sectional dimensions.
More informationChapter 7. ELASTIC INSTABILITY Dr Rendy Thamrin; Zalipah Jamellodin
Chapter 7 ESTIC INSTIITY Dr Rendy Thamrin; Zalipah Jamellodin 7. INTRODUCTION TO ESTIC INSTIITY OF COUN ND FRE In structural analysis problem, the aim is to determine a configuration of loaded system,
More information3. BEAMS: STRAIN, STRESS, DEFLECTIONS
3. BEAMS: STRAIN, STRESS, DEFLECTIONS The beam, or flexural member, is frequently encountered in structures and machines, and its elementary stress analysis constitutes one of the more interesting facets
More informationComparison of Euler Theory with Experiment results
Comparison of Euler Theory with Experiment results Limitations of Euler's Theory : In practice the ideal conditions are never [ i.e. the strut is initially straight and the end load being applied axially
More informationPart D: Frames and Plates
Part D: Frames and Plates Plane Frames and Thin Plates A Beam with General Boundary Conditions The Stiffness Method Thin Plates Initial Imperfections The Ritz and Finite Element Approaches A Beam with
More informationMAHALAKSHMI ENGINEERING COLLEGE
MAHALAKSHMI ENGINEERING COLLEGE TIRUCHIRAALLI - 6113. QUESTION WITH ANSWERS DEARTMENT : CIVIL SEMESTER: V SUB.CODE/ NAME: CE 5 / Strength of Materials UNIT 3 COULMNS ART - A ( marks) 1. Define columns
More informationA study of the critical condition of a battened column and a frame by classical methods
University of South Florida Scholar Commons Graduate Theses and Dissertations Graduate School 003 A study of the critical condition of a battened column and a frame by classical methods Jamal A.H Bekdache
More informationOn Nonlinear Buckling and Collapse Analysis using Riks Method
Visit the SIMULIA Resource Center for more customer examples. On Nonlinear Buckling and Collapse Analysis using Riks Method Mingxin Zhao, Ph.D. UOP, A Honeywell Company, 50 East Algonquin Road, Des Plaines,
More informationDesign of Steel Structures Prof. S.R.Satish Kumar and Prof. A.R.Santha Kumar. Local buckling is an extremely important facet of cold formed steel
5.3 Local buckling Local buckling is an extremely important facet of cold formed steel sections on account of the fact that the very thin elements used will invariably buckle before yielding. Thinner the
More informationKarbala University College of Engineering Department of Civil Eng. Lecturer: Dr. Jawad T. Abodi
Chapter 04 Structural Steel Design According to the AISC Manual 13 th Edition Analysis and Design of Compression Members By Dr. Jawad Talib Al-Nasrawi University of Karbala Department of Civil Engineering
More information[8] Bending and Shear Loading of Beams
[8] Bending and Shear Loading of Beams Page 1 of 28 [8] Bending and Shear Loading of Beams [8.1] Bending of Beams (will not be covered in class) [8.2] Bending Strain and Stress [8.3] Shear in Straight
More informationWhere and are the factored end moments of the column and >.
11 LIMITATION OF THE SLENDERNESS RATIO----( ) 1-Nonsway (braced) frames: The ACI Code, Section 6.2.5 recommends the following limitations between short and long columns in braced (nonsway) frames: 1. The
More informationGeneral elastic beam with an elastic foundation
General elastic beam with an elastic foundation Figure 1 shows a beam-column on an elastic foundation. The beam is connected to a continuous series of foundation springs. The other end of the foundation
More informationCHAPTER 5. Beam Theory
CHPTER 5. Beam Theory SangJoon Shin School of Mechanical and erospace Engineering Seoul National University ctive eroelasticity and Rotorcraft Lab. 5. The Euler-Bernoulli assumptions One of its dimensions
More informationCHAPTER 4. ANALYSIS AND DESIGN OF COLUMNS
4.1. INTRODUCTION CHAPTER 4. ANALYSIS AND DESIGN OF COLUMNS A column is a vertical structural member transmitting axial compression loads with or without moments. The cross sectional dimensions of a column
More informationAdvanced Vibrations. Distributed-Parameter Systems: Exact Solutions (Lecture 10) By: H. Ahmadian
Advanced Vibrations Distributed-Parameter Systems: Exact Solutions (Lecture 10) By: H. Ahmadian ahmadian@iust.ac.ir Distributed-Parameter Systems: Exact Solutions Relation between Discrete and Distributed
More informationCH. 4 BEAMS & COLUMNS
CH. 4 BEAMS & COLUMNS BEAMS Beams Basic theory of bending: internal resisting moment at any point in a beam must equal the bending moments produced by the external loads on the beam Rx = Cc + Tt - If the
More information202 Index. failure, 26 field equation, 122 force, 1
Index acceleration, 12, 161 admissible function, 155 admissible stress, 32 Airy's stress function, 122, 124 d'alembert's principle, 165, 167, 177 amplitude, 171 analogy, 76 anisotropic material, 20 aperiodic
More informationWORCESTER POLYTECHNIC INSTITUTE
WORCETER OLYTECHNIC INTITUTE MECHANICAL ENGINEERING DEARTMENT DGN OF MACHINE ELEMENT ME-330, B 018 Lecture 08-09 November 018 Examples w Eccentric load Concentric load w Examples Vestas V80-.0 MWatt Installing
More informationBEAM DEFLECTION THE ELASTIC CURVE
BEAM DEFLECTION Samantha Ramirez THE ELASTIC CURVE The deflection diagram of the longitudinal axis that passes through the centroid of each cross-sectional area of a beam. Supports that apply a moment
More informationNYIT Instructors: Alfred Sanabria and Rodrigo Suarez
NYIT Instructors: Alfred Sanabria and Rodrigo Suarez Massive stone columns, used from Stonehenge to Ancient Greece were stabilized by their own work With steel and concrete technology columns have become
More informationENG2000 Chapter 7 Beams. ENG2000: R.I. Hornsey Beam: 1
ENG2000 Chapter 7 Beams ENG2000: R.I. Hornsey Beam: 1 Overview In this chapter, we consider the stresses and moments present in loaded beams shear stress and bending moment diagrams We will also look at
More informationCivil. Engineering INELASTIC BENDING CAPACITY IN COLD-FORMED STEEL MEMBERS Annual Stability Conference New Orleans, Louisiana
Civil Engineering at JOHNS HOPKINS UNIVERSITY at JOHNS HOPKINS UNIVERSITY INELASTIC BENDING CAPACITY IN COLD-FORMED STEEL MEMBERS 2007 Annual Stability Conference New Orleans, Louisiana April 2007 Y.Shifferaw
More informationChapter 8 Structural Design and Analysis. Strength and stiffness 5 types of load: Tension Compression Shear Bending Torsion
Chapter 8 Structural Design and Analysis 1 Strength and stiffness 5 types of load: Tension Compression Shear Bending Torsion Normal Stress Stress is a state when a material is loaded. For normal forces
More informationENG1001 Engineering Design 1
ENG1001 Engineering Design 1 Structure & Loads Determine forces that act on structures causing it to deform, bend, and stretch Forces push/pull on objects Structures are loaded by: > Dead loads permanent
More informationPES Institute of Technology
PES Institute of Technology Bangalore south campus, Bangalore-5460100 Department of Mechanical Engineering Faculty name : Madhu M Date: 29/06/2012 SEM : 3 rd A SEC Subject : MECHANICS OF MATERIALS Subject
More informationCivil Engineering Design (1) Design of Reinforced Concrete Columns 2006/7
Civil Engineering Design (1) Design of Reinforced Concrete Columns 2006/7 Dr. Colin Caprani, Chartered Engineer 1 Contents 1. Introduction... 3 1.1 Background... 3 1.2 Failure Modes... 5 1.3 Design Aspects...
More informationD : SOLID MECHANICS. Q. 1 Q. 9 carry one mark each.
GTE 2016 Q. 1 Q. 9 carry one mark each. D : SOLID MECHNICS Q.1 single degree of freedom vibrating system has mass of 5 kg, stiffness of 500 N/m and damping coefficient of 100 N-s/m. To make the system
More informationChapter 5 Elastic Strain, Deflection, and Stability 1. Elastic Stress-Strain Relationship
Chapter 5 Elastic Strain, Deflection, and Stability Elastic Stress-Strain Relationship A stress in the x-direction causes a strain in the x-direction by σ x also causes a strain in the y-direction & z-direction
More informationtwo structural analysis (statics & mechanics) APPLIED ACHITECTURAL STRUCTURES: DR. ANNE NICHOLS SPRING 2017 lecture STRUCTURAL ANALYSIS AND SYSTEMS
APPLIED ACHITECTURAL STRUCTURES: STRUCTURAL ANALYSIS AND SYSTEMS DR. ANNE NICHOLS SPRING 2017 lecture two structural analysis (statics & mechanics) Analysis 1 Structural Requirements strength serviceability
More informationDesign of Beams (Unit - 8)
Design of Beams (Unit - 8) Contents Introduction Beam types Lateral stability of beams Factors affecting lateral stability Behaviour of simple and built - up beams in bending (Without vertical stiffeners)
More informationLecture 8. Stress Strain in Multi-dimension
Lecture 8. Stress Strain in Multi-dimension Module. General Field Equations General Field Equations [] Equilibrium Equations in Elastic bodies xx x y z yx zx f x 0, etc [2] Kinematics xx u x x,etc. [3]
More informationShafts: Torsion of Circular Shafts Reading: Crandall, Dahl and Lardner 6.2, 6.3
M9 Shafts: Torsion of Circular Shafts Reading: Crandall, Dahl and Lardner 6., 6.3 A shaft is a structural member which is long and slender and subject to a torque (moment) acting about its long axis. We
More informationStructural Dynamics Lecture Eleven: Dynamic Response of MDOF Systems: (Chapter 11) By: H. Ahmadian
Structural Dynamics Lecture Eleven: Dynamic Response of MDOF Systems: (Chapter 11) By: H. Ahmadian ahmadian@iust.ac.ir Dynamic Response of MDOF Systems: Mode-Superposition Method Mode-Superposition Method:
More informationNUMERICAL EVALUATION OF THE ROTATIONAL CAPACITY OF STEEL BEAMS AT ELEVATED TEMPERATURES
8 th GRACM International Congress on Computational Mechanics Volos, 12 July 15 July 2015 NUMERICAL EVALUATION OF THE ROTATIONAL CAPACITY OF STEEL BEAMS AT ELEVATED TEMPERATURES Savvas Akritidis, Daphne
More informationCompression Members Columns II
Compression Members Columns II 1. Introduction. Main aspects related to the derivation of typical columns buckling lengths for. Analysis of imperfections, leading to the derivation of the Ayrton-Perry
More informationMECHANICS LAB AM 317 EXP 5 COLUMN BEHAVIOR BUCKLING
MECHANICS LAB AM 317 EX 5 COLUMN BEHAVIOR BUCKLING I. OBJECTIVES I.1 To determine the effect the slenderness ratio has on the load carrying capacity of columns of varying lengths. I. To observe short,
More informationIntroduction to Finite Element Method
Introduction to Finite Element Method Dr. Rakesh K Kapania Aerospace and Ocean Engineering Department Virginia Polytechnic Institute and State University, Blacksburg, VA AOE 524, Vehicle Structures Summer,
More informationUNIT IV FLEXIBILTY AND STIFFNESS METHOD
SIDDHARTH GROUP OF INSTITUTIONS :: PUTTUR Siddharth Nagar, Narayanavanam Road 517583 QUESTION BANK (DESCRIPTIVE) Subject with Code : SA-II (13A01505) Year & Sem: III-B.Tech & I-Sem Course & Branch: B.Tech
More informationFailure in Flexure. Introduction to Steel Design, Tensile Steel Members Modes of Failure & Effective Areas
Introduction to Steel Design, Tensile Steel Members Modes of Failure & Effective Areas MORGAN STATE UNIVERSITY SCHOOL OF ARCHITECTURE AND PLANNING LECTURE VIII Dr. Jason E. Charalambides Failure in Flexure!
More informationFinite Element Modelling with Plastic Hinges
01/02/2016 Marco Donà Finite Element Modelling with Plastic Hinges 1 Plastic hinge approach A plastic hinge represents a concentrated post-yield behaviour in one or more degrees of freedom. Hinges only
More informationFLEXIBILITY METHOD FOR INDETERMINATE FRAMES
UNIT - I FLEXIBILITY METHOD FOR INDETERMINATE FRAMES 1. What is meant by indeterminate structures? Structures that do not satisfy the conditions of equilibrium are called indeterminate structure. These
More information4.MECHANICAL PROPERTIES OF MATERIALS
4.MECHANICAL PROPERTIES OF MATERIALS The diagram representing the relation between stress and strain in a given material is an important characteristic of the material. To obtain the stress-strain diagram
More informationAvailable online at ScienceDirect. Procedia IUTAM 13 (2015 ) 82 89
Available online at www.sciencedirect.com ScienceDirect Procedia IUTAM 13 (215 ) 82 89 IUTAM Symposium on Dynamical Analysis of Multibody Systems with Design Uncertainties The importance of imperfections
More informationCE6306 STRENGTH OF MATERIALS TWO MARK QUESTIONS WITH ANSWERS ACADEMIC YEAR
CE6306 STRENGTH OF MATERIALS TWO MARK QUESTIONS WITH ANSWERS ACADEMIC YEAR 2014-2015 UNIT - 1 STRESS, STRAIN AND DEFORMATION OF SOLIDS PART- A 1. Define tensile stress and tensile strain. The stress induced
More informationQUESTION BANK SEMESTER: III SUBJECT NAME: MECHANICS OF SOLIDS
QUESTION BANK SEMESTER: III SUBJECT NAME: MECHANICS OF SOLIDS UNIT 1- STRESS AND STRAIN PART A (2 Marks) 1. Define longitudinal strain and lateral strain. 2. State Hooke s law. 3. Define modular ratio,
More informationCHAPTER 4: BENDING OF BEAMS
(74) CHAPTER 4: BENDING OF BEAMS This chapter will be devoted to the analysis of prismatic members subjected to equal and opposite couples M and M' acting in the same longitudinal plane. Such members are
More informationFlexural-Torsional Buckling of General Cold-Formed Steel Columns with Unequal Unbraced Lengths
Proceedings of the Annual Stability Conference Structural Stability Research Council San Antonio, Texas, March 21-24, 2017 Flexural-Torsional Buckling of General Cold-Formed Steel Columns with Unequal
More informationM15e Bending of beams
Fakultät für Physik und Geowissenschaften Physikalisches Grundpraktikum M5e Bending of beams Tasks. Determine Young s modulus E for two metal rods of different material but of the same crosssectional form
More informationQUESTION BANK DEPARTMENT: CIVIL SEMESTER: III SUBJECT CODE: CE2201 SUBJECT NAME: MECHANICS OF SOLIDS UNIT 1- STRESS AND STRAIN PART A
DEPARTMENT: CIVIL SUBJECT CODE: CE2201 QUESTION BANK SEMESTER: III SUBJECT NAME: MECHANICS OF SOLIDS UNIT 1- STRESS AND STRAIN PART A (2 Marks) 1. Define longitudinal strain and lateral strain. 2. State
More informationBasic principles of steel structures. Dr. Xianzhong ZHAO
Basic principles of steel structures Dr. Xianzhong ZHAO.zhao@mail.tongji.edu.cn www.sals.org.cn 1 Introduction Resistance of cross-section Compression members Outlines Overall stabilit of uniform (solid
More informationVirtual Work and Variational Principles
Virtual Work and Principles Mathematically, the structural analysis problem is a boundary value problem (BVP). Forces, displacements, stresses, and strains are connected and computed within the framework
More informationAutomatic Scheme for Inelastic Column Buckling
Proceedings of the World Congress on Civil, Structural, and Environmental Engineering (CSEE 16) Prague, Czech Republic March 30 31, 2016 Paper No. ICSENM 122 DOI: 10.11159/icsenm16.122 Automatic Scheme
More informationε t increases from the compressioncontrolled Figure 9.15: Adjusted interaction diagram
CHAPTER NINE COLUMNS 4 b. The modified axial strength in compression is reduced to account for accidental eccentricity. The magnitude of axial force evaluated in step (a) is multiplied by 0.80 in case
More informationLocal Buckling. Local Buckling in Columns. Buckling is not to be viewed only as failure of the entire member
Local Buckling MORGAN STATE UNIVERSITY SCHOOL OF ARCHITECTURE AND PLANNING LECTURE V Dr. Jason E. Charalamides Local Buckling in Columns Buckling is not to e viewed only as failure of the entire memer
More informationClearly the passage of an eigenvalue through to the positive real half plane leads to a qualitative change in the phase portrait, i.e.
Bifurcations We have already seen how the loss of stiffness in a linear oscillator leads to instability. In a practical situation the stiffness may not degrade in a linear fashion, and instability may
More informationTHE COLLAPSE LOAD IN SUBMARINE PIPELINES UNDER COMPRESSIVE LOAD AND INTERNAL PRESSURE
SDSS Rio 010 STABILITY AND DUCTILITY OF STEEL STRUCTURES E. Batista,. Vellasco, L. de Lima (Eds.) Rio de Janeiro, Brazil, September 8-10, 010 THE COLLASE LOAD IN SUBMARINE IELINES UNDER COMRESSIVE LOAD
More informationComb resonator design (2)
Lecture 6: Comb resonator design () -Intro Intro. to Mechanics of Materials School of Electrical l Engineering i and Computer Science, Seoul National University Nano/Micro Systems & Controls Laboratory
More informationDownloaded from Downloaded from / 1
PURWANCHAL UNIVERSITY III SEMESTER FINAL EXAMINATION-2002 LEVEL : B. E. (Civil) SUBJECT: BEG256CI, Strength of Material Full Marks: 80 TIME: 03:00 hrs Pass marks: 32 Candidates are required to give their
More informationMECE 3321: Mechanics of Solids Chapter 6
MECE 3321: Mechanics of Solids Chapter 6 Samantha Ramirez Beams Beams are long straight members that carry loads perpendicular to their longitudinal axis Beams are classified by the way they are supported
More informationSUMMARY FOR COMPRESSION MEMBERS. Determine the factored design loads (AISC/LRFD Specification A4).
SUMMARY FOR COMPRESSION MEMBERS Columns with Pinned Supports Step 1: Step : Determine the factored design loads (AISC/LRFD Specification A4). From the column tables, determine the effective length KL using
More informationStructural Analysis Laboratory. Michael Storaker, Sam Davey and Rhys Witt. JEE 332 Structural Analysis. 4 June 2012.
Structural Analysis Laboratory Michael Storaker, Sam Davey and Rhys Witt JEE 332 Structural Analysis 4 June 2012 Lecturer/Tutor Shinsuke Matsuarbara 1 Contents Statically Indeterminate Structure Objective...
More informationCIV 207 Winter For practice
CIV 07 Winter 009 Assignment #10 Friday, March 0 th Complete the first three questions. Submit your work to Box #5 on the th floor of the MacDonald building by 1 noon on Tuesday March 31 st. No late submissions
More informationCHAPTER 14 BUCKLING ANALYSIS OF 1D AND 2D STRUCTURES
CHAPTER 14 BUCKLING ANALYSIS OF 1D AND 2D STRUCTURES 14.1 GENERAL REMARKS In structures where dominant loading is usually static, the most common cause of the collapse is a buckling failure. Buckling may
More informationUNIVERSITY OF SASKATCHEWAN ME MECHANICS OF MATERIALS I FINAL EXAM DECEMBER 13, 2008 Professor A. Dolovich
UNIVERSITY OF SASKATCHEWAN ME 313.3 MECHANICS OF MATERIALS I FINAL EXAM DECEMBER 13, 2008 Professor A. Dolovich A CLOSED BOOK EXAMINATION TIME: 3 HOURS For Marker s Use Only LAST NAME (printed): FIRST
More information6. Bending CHAPTER OBJECTIVES
CHAPTER OBJECTIVES Determine stress in members caused by bending Discuss how to establish shear and moment diagrams for a beam or shaft Determine largest shear and moment in a member, and specify where
More informationA HIGHER-ORDER BEAM THEORY FOR COMPOSITE BOX BEAMS
A HIGHER-ORDER BEAM THEORY FOR COMPOSITE BOX BEAMS A. Kroker, W. Becker TU Darmstadt, Department of Mechanical Engineering, Chair of Structural Mechanics Hochschulstr. 1, D-64289 Darmstadt, Germany kroker@mechanik.tu-darmstadt.de,
More informationThis procedure covers the determination of the moment of inertia about the neutral axis.
327 Sample Problems Problem 16.1 The moment of inertia about the neutral axis for the T-beam shown is most nearly (A) 36 in 4 (C) 236 in 4 (B) 136 in 4 (D) 736 in 4 This procedure covers the determination
More informationIntroduction to Continuous Systems. Continuous Systems. Strings, Torsional Rods and Beams.
Outline of Continuous Systems. Introduction to Continuous Systems. Continuous Systems. Strings, Torsional Rods and Beams. Vibrations of Flexible Strings. Torsional Vibration of Rods. Bernoulli-Euler Beams.
More information