Capacitance range: 100 pf to 4.7 mf (E12-values on request) Rated voltages:

Size: px
Start display at page:

Download "Capacitance range: 100 pf to 4.7 mf (E12-values on request) Rated voltages:"

Transcription

1 WIMA FKP 1 Polypropylene (PP) Capacitors for Pulse Applications with Metal Foil Electrodes and Metallized Internal Series Connection in PCM 1 mm to. mm. Capacitances from 100 pf to 4.7 mf. Rated Voltages from 400 VC to 6000 VC. Special Features Extremely high pulse duty Self-healing Internal series connection Very low dissipation factor Negative capacitance change versus temperature According to RoHS 011/6/EU Typical Applications For high pulse and high frequency applications e.g. Switch mode power supplies Converters in drives and power electronics eflection systems in monitors and TV-sets Electronic ballasts Construction ielectric: Polypropylene (PP) film Capacitor electrodes: Aluminium foil and double-sided metallized plastic film Internal construction: Plastic film Metal foil electrode Electrode carrier plastic film metallized on both sides Metal contact layer (schoopage) Terminating wire Electrical ata Capacitance range: 100 pf to 4.7 mf (E1-values on request) Rated voltages: 400 VC, 630 VC, 80 VC, 1000 VC, 10 VC, 1600 VC, 000 VC, 4000 VC, 6000 VC Capacitance tolerances: ±0%, ±10%, ±% (other tolerances are available subject to special enquiry) Operating temperature range: + C to C Climatic test category: /100/6 in accordance with IEC Test voltage: U r, sec / 6 kv: PCM < U r, sec, PCM U r, sec. ielectric absorption: 0.0 % issipation factors at +0+ C: tan d Insulation resistance at +0+ C: C T 0.1 mf: 1 x 10 M C 0.1 mf: sec (M x mf) Measuring voltage: 100 V/1 min. Voltage derating: A voltage derating factor of 1.3 % per K must be applied from +8+ C for C voltages and from +7+ C for AC voltages Reliability: Operational life hours Failure rate 1 fit (0. x U r and 40+ C) at f C 0.1 mf 0.1 mf P C 1.0 mf C 1.0 mf 1 k x10-4 x 10-4 x k 6 x x k 10 x 10-4 Maximum pulse rise time: for pulses equal to the rated voltage Capacitance max. pulse rise time V/msec at T A < 40) C pf/mf 400 VC 630 VC 80 VC 1000 VC 10 VC 1600 VC 000 VC 4000 VC 6000 VC Encapsulation: Solvent-resistant, flame-retardant plastic case with epoxy resin seal, UL 94 V-0 Terminations: Tinned wire. Marking: Colour: Red. Marking: Black. Mechanical Tests Pull test on pins: d T 0.8 l: 10 N in direction of pins d > 0.8 l: 0 N in direction of pins according to IEC Vibration: 6 hours at and 0.7 mm displacement amplitude or 10 g in accordance with IEC Low air density: 1kPa = 10 mbar in accordance with IEC Bump test: 4000 bumps at 390 m/sec in accordance with IEC Packing Available taped and reeled up to and including case size 1 x 6 x 31. / PCM 7. mm. etailed taping information and graphs at the end of the catalogue. For further details and graphs please refer to Technical Information. 7

2 WIMA FKP 1 Continuation General ata Capacitance 400 VC/0 VAC* 630 VC/400 VAC* W H L PCM** Part number W H L PCM** Part number 1000 pf FKP1G011004B FKP1J011004B FKP1G01104B FKP1J01104B FKP1G0104B FKP1J0104B FKP1G013304B FKP1J013304B FKP1G014704B FKP1J014704B FKP1G016804B FKP1J016804C 0.01 mf FKP1G01004B FKP1J FKP1J0100A FKP1G0104C FKP1J0104F FKP1J010B FKP1G FKP1J FKP1G00A FKP1G03304F FKP1J0330F FKP1G0330B FKP1G FKP1J0470H FKP1J04706A FKP1G0680F FKP1J06806B FKP1J06807A 0.1 mf FKP1G03100H FKP1J FKP1G031006A FKP1J031007B FKP1G03106B FKP1J03107C FKP1G FKP1J FKP1G0307B FKP1G033307C FKP1J033307F FKP1G034707E FKP1J034707G FKP1G036807F FKP1J036807H 1.0 mf FKP1G041007G FKP1J041007J FKP1G04107I FKP1J04107K FKP1J04109F FKP1G0407J 4 7. FKP1J0409H FKP1G043309F FKP1G044709J * AC voltages: f T 1000 ; 1.4 x U rms + UC T U r New values ** PCM = Printed circuit module = pin spacing ims. in mm. The values of the WIMA FKP 4 range according to main catalogue 01 are still available on request. Ionisation inception level in isolated cases may be lower than admissible rated AC voltage. Part number completeion: Version code: -pin = 00 4-pin = 4 Tolerance: 0 % = M 10 % = K % = J Packing: bulk = S Pin length: 6- = S Taped version see page 148. Rights reserved to amend design data without prior notification. Continuation page 74 73

3 WIMA FKP 41 Continuation General ata Capacitance 80 VC/40 VAC* 1000 VC/600 VAC* W H L PCM** Part number W H L PCM** Part number 1000 pf FKP1M011004B FKP1O111004B FKP1M01104B FKP1O11104B FKP1M0104B FKP1O1104B FKP1M013304B FKP1O113304B FKP1M014704C FKP1O114704C FKP1M FKP1O mf FKP1M01004F FKP1O11004F FKP1M0100B FKP1O1100B FKP1M010B FKP1O110B FKP1M00F FKP1O10F FKP1M0330H FKP1O1330H FKP1M03306A FKP1O13306A FKP1M04706B FKP1O14706B FKP1M FKP1O FKP1M06807B FKP1O16807B 0.1 mf FKP1M031007C FKP1O131007C FKP1M FKP1O FKP1M0307F FKP1O1307F FKP1M033307G FKP1O133307G FKP1M034707I FKP1O134707I FKP1M036807J FKP1O136807J 1.0 mf FKP1M041007K FKP1O141007K FKP1M041009F FKP1O141009F FKP1M04109H 4 7. FKP1O14109H, 4 6 7, FKP1M0409J 4 6 7, FKP1O1409J * AC voltages: f T 1000 ; 1.4 x U rms + UC T U r New range and values ** PCM = Printed circuit module = pin spacing ims. in mm. Ionisation inception level in isolated cases may be lower than admissible rated AC voltage. Part number completion: Version code: -pin = 00 4-pin = 4 Tolerance: 0 % = M 10 % = K % = J Packing: bulk = S Pin length: 6- = S Taped version see page pin version 4-pin version pin P d PCM pin c pin c W PCM b P d c Rights reserved to amend design data without prior notification Continuation page 7 74

4 WIMA FKP 4 1 Continuation General ata Capacitance 10 VC/600 VAC* 1600 VC/60 VAC* W H L PCM** Part number W H L PCM** Part number 100 pf FKP1T001004B FKP1T00104B FKP1T0004B FKP1T003304B FKP1T004704B FKP1T006804B 1000 pf FKP1R011004B FKP1T011004C FKP1T01100A FKP1R01104B FKP1T FKP1T0110A FKP1R0104B FKP1T0104F FKP1T010A FKP1R013304C FKP1T01330B FKP1R FKP1T FKP1R016804F FKP1T01680F FKP1R01680A 0.01 mf FKP1R FKP1T0100H FKP1R010F FKP1T0106B FKP1R00H FKP1T006B FKP1R03306B FKP1T FKP1R03307A FKP1T03307C FKP1R FKP1T04707C FKP1R04707B FKP1R06807B FKP1T mf FKP1R FKP1T031007E FKP1R03107E FKP1T03107G FKP1R0307F FKP1T0307H FKP1R033307H FKP1T033307I FKP1R034707I FKP1T034707K FKP1R036807K FKP1T036809F 1.0 mf FKP1R041009F 4 7. FKP1T041009H FKP1R04109J * AC voltages: f T 1000 ; 1.4 x U rms + UC T U r New values ** PCM = Printed circuit module = pin spacing ims. in mm. Ionisation inception level in isolated cases may be lower than admissible rated AC voltage. Part number completion: Version code: -pin = 00 4-pin = 4 Tolerance: 0 % = M 10 % = K % = J Packing: bulk = S Pin length: 6- = S Taped version see page 148. Rights reserved to amend design data without prior notification Continuation page 76 7

5 WIMA FKP 4 1 Continuation General ata Capacitance 000 VC/700 VACZ* 4000 VC/700 VAC* W H L PCM** Part number W H L PCM** Part number 100 pf FKP1U001004B FKP1U00104B FKP1U0004B FKP1U003304C FKP1U004704C FKP1X00470A FKP1U006804C FKP1X00680A 1000 pf FKP1U FKP1X01100A FKP1U01100A FKP1U0110B FKP1X FKP1U FKP1X010F FKP1U FKP1X01330H FKP1U01470F FKP1X014706B FKP1U01680H FKP1X mf FKP1U01006B FKP1X01006F FKP1U FKP1X0107C FKP1U006F FKP1X007E FKP1U007C FKP1U03307C FKP1X03307G FKP1U04707E FKP1X04707H FKP1U06807F FKP1X06807I 0.1 mf FKP1U031007G FKP1X031007J FKP1U03107H FKP1X03107K FKP1U0307J 4 7. FKP1X0309H FKP1U033307K FKP1U034709H FKP1U036809J * AC voltages: f T 1000 ; 1.4 x U rms + UC T U r New values ** PCM = Printed circuit module = pin spacing ims. in mm. Ionisation inception level in isolated cases may be lower than admissible rated AC voltage. -pin version 4-pin version Part number completion: Version code: -pin = 00 4-pin = 4 Tolerance: 0 % = M 10 % = K % = J Packing: bulk = S Pin length: 6- = S Taped version see page 148. pin P d PCM pin c pin c W PCM b P d c Rights reserved to amend design data without prior notificationn. Continuation page 77 76

6 WIMA FKP 41 Continuation General ata Capacitance 6000 VC/700 VAC* W H L PCM** Part number ims. in mm. 470 pf FKP1Y00470A Ionisation inception level in isolated cases may FKP1Y00680A be lower than admissible rated AC voltage pf FKP1Y01100A FKP1Y FKP1Y010H FKP1Y01330H FKP1Y014706B FKP1Y mf FKP1Y01006F FKP1Y0107C FKP1Y007E FKP1Y03307G FKP1Y04707H FKP1Y06807I 0.1 mf FKP1Y031007J FKP1Y03107K FKP1Y0309H * AC voltages: f T 1000 ; 1.4 x U rms + UC T U r New values ** PCM = Printed circuit module = pin spacing Rights reserved to amend design data without prior notificationn. Part number completion: Version code: -pin = 00 4-pin = 4 Tolerance: 0 % = M 10 % = K % = J Packing: bulk = S Pin length: 6- = S Taped version see page 148. Permissible AC voltage in relation to frequency at 10) C internal temperature rise (general guide). V µf 1000 pf 00 pf 0.0 µf V µf 0.1 µf 1000 pf pf µf 00 pf 630 VC µf 0. µf 1600 VC f 106 V pf µf 0. µf 1000 pf 0.0 µf f 106 V µf µf 100 pf 100 pf 0 pf 1000 VC 0.1 µf 000 VC V µf 0.1 µf 1000 pf f 106 V µf 0.1 µf 1000 pf 00 pf f 106 V pf 470 pf 1000 pf 0.0 µf 400 VC 00 pf µf 0. µf 10 VC µf 0. µf 4000 VC 6000 VC f f f

7 Recommendation for Processing and Application of Through-Hole Capacitors Soldering Process Internal temperature of the capacitor must be kept as follows: Polyester: preheating: T max. T 1 C soldering: T max. T 13 C Polypropylene: preheating: T max. T 100 C soldering: T max. T 110 C Single wave soldering Soldering bath temperature: T P 60 C well time: t P sec ouble wave soldering Soldering bath temperature: T P 60 C well time: St P sec ue to different soldering processes and heat requirements the graphs are to be regarded as a recommendation only. WIMA Quality and Environmental Philosophy ISO 9001:008 Certification ISO 9001:008 is an international basic standard of quality assurance systems for all branches of industry. The approval according to ISO 9001:008 of our factories by the infaz (Institut für Auditierung und Zertifizierung) certifies that organisation, equipment and monitoring of quality assurance in our factories correspond to internationally recognized standards. WIMA WPCS The WIMA Process Control System (WPCS) is a quality surveillance and optimization system developed by WIMA. WPCS is a major part of the quality-oriented WIMA production. Points of application during production process: incoming material inspection metallization film inspection schoopage pre-healing pin attachment cast resin preparation/ encapsulation 100% final inspection Testing as per customer requirements WIMA Environmental Policy All WIMA capacitors, irrespective of whether through-hole devices or SM, are made of environmentally friendly materials. Neither during manufacture nor in the product itself any toxic substances are used, e.g. Lead PBB/PBE PCB Arsenic CFC Cadmium Hydrocarbon chloride Mercury Chromium 6+ etc. We merely use pure, recyclable materials for packing our components, such as: carton cardboard adhesive tape made of paper polystyrene We almost completely refrain from using packing materials such as: foamed polystyrene (Styropor ) adhesive tapes made of plastic metal clips RoHS Compliance According to the RoHS irective 011/6/EU certain hazardous substances like e.g. lead, cadmium, mercury must not be used any longer in electronic equipment as of July 1st, 006. For the sake of the environment WIMA has refraind from using such substances since years already. WIMA Kondensatoren sind bleifrei konform RoHS 011/6/EU WIMA capacitors are lead free in accordance with RoHS 011/6/EU Tape for lead-free WIMA capacitors IN EN ISO 14001:004 WIMA s environmental management has been established in accordance with the guidelines of IN EN ISO 14001:004 to optimize the production processes with regard to energy and resources. 1

8 P P P 1 H1 P 1 H t Typical imensions for Taping Configuration P P Vh H1 P 1 W H W0 W1 iagram 1: PCM.//7.mm W 0 F d P 0 d d F P 0 P F P P 0 iagram : PCM10/1mm iagram 3:PCM. and 7.*mm *PCM 7. taping possible withtwo feed holesbetween components imensions for Radial Taping esignation Symbol PCM. taping PCM taping PCM 7. taping PCM 10 taping* PCM 1 taping* PCM. taping PCM 7. taping Carrier tape width W 18.0 p p p p p p p0. Hold-down tape width W for hot-sealing 6.0 for hot-sealing 1.0 for hot-sealing 1.0 for hot-sealing 1.0 for hot-sealing 1.0 for hot-sealing for hot-sealing 1.0 adhesive tape adhesive tape adhesive tape adhesive tape adhesive tape adhesive tape adhesive tape Hole position W p p p p p p p0. Hold-down tape position W 0. to 3.0 max. 0. to 3.0 max. 0. to 3.0 max. 0. to 3.0 max. 0. to 3.0 max. 0. to 3.0 max. 0. to 3.0 max. Feed hole diameter p p p p p p p0. Pitch of component P 1.7 p p p1.0.4 p1.0.4 p p1. 3 * 8.1 p1. or 0.8 p1. cumulative pitch cumulative pitch cumulative pitch cumulative pitch cumulative pitch cumulative pitch cumulative pitch Feed hole pitch P p0.3 error max. 1.7 p0.3 error max. 1.7 p0.3 error max. 1.7 p0.3 error max. 1.7 p0.3 error max. 1.7 p0.3 error max. 1.7 p0.3 error max. 1.0 mm/0 pitch 1.0 mm/0 pitch 1.0 mm/0 pitch 1.0 mm/0 pitch 1.0 mm/0 pitch 1.0 mm/0 pitch 1.0 mm/0 pitch Feed hole centre to pin Hole centre to component centre P 1.1 p p0.7.6 p p0.7. p p0.7.3 p0.7 P 6.3 p p p p p p p1.3 Feed hole centre to bottom 16. p p p p p p p0. H edge of the component 18. p p p p p p p0. Feed hole centre to top H+H H component < H 1 H+H component < H 1 H+H component < H 1 H+H component < H 1 H+H component < H 1 H+H component < H 1 H+H component < H 1 edge of the component 1 3. max. 3. max. 4. to to to to to 4.0 Pin spacing at F. p p p0.8 1 p0.8. p p0.8 upper edge of carrier tape 0. Pin diameter d 0.4 p p p0.0 or ,06 +0,08 +0, p0.0 or Component alignment h p.0 max. p.0 max. p 3.0 max. p 3.0 max. p 3.0 max. p 3.0 max. p 3.0 max. Total tape thickness t 0.7 p p p p p p p0. Package (see also page 149) ROLL/AMMO Unit see details page 10. ims in mm. iameter of pins see General ata. REEL P 360 max. p depending on P 30 p1 B 8 p comp. dimensions * PCM 10 and PCM 1 can be crimped to PCM 7.. Position of components according to PCM 7. (sketch 1). P 0 = 1.7 or 1.0 is possible REEL P 360 max. B P 30 p1 AMMO p 4 p depending P 00 max. 8 p or REEL B 60 p on PCM and P p1 66 p 68 p component dimensions Please clarify customer-specific deviations with the manufacturer. 148

9 Types of Tape Packaging of Capacitors for Automatic Radial Insertion ROLL Packaging AMMO Packaging REEL Packaging 340 max. 370 max. 30± 1 ± max. 00 max. 0 max. 70 max. 340 max. 490 max. BAR COE (Labelling) Labelling of package units in plain text and with alphanumerical Bar Code Scanner decoding of WIMA supplier number Customer s P/O number Customer s part number WIMA confirmation number WIMA part number Lot number ate code Quantity In addition part description of article capacitance value rated voltage dimensions capacitance tolerance packing as well as gross weight and customer s name are indicated in plain text. BARCOE Code max. 340 max. 0 max. B 149

10 Packing Quantities for Capacitors with Radial Pins in PCM. mm to. mm PCM. mm mm 7. mm 10 mm 1 mm. mm pcs. per packing unit Size ROLL REEL AMMO bulk P 360 P x x 370 H16. H18. H16. H18. H16. H18. H16. H18. H16. H18. W H L Codes S N O F I H J A C B B C E F A B C E F G H I J K L M N A B C E F G A FA C FB F G H I B FC C F FE F FF H J FG M A B FH F FI 70* G 94* H 94* I 61* FJ 480* * TPS (Tray-Packing-System). Plate versions may have different packing units. Moulded versions. Rights reserved to amend design data without prior notification. Samples and pre-production needs on request. 10

11 Packing Quantities for Capacitors with Radial Pins in PCM 7. mm to. mm PCM 7. mm 37. mm 48. mm. mm pcs. per packing unit Size ROLL REEL AMMO bulk P 360 P x x 370 H16. H18. H16. H18. H16. H18. H16. H18. H16. H18. W H L Codes S N O F I H J A C B A 67* 460/340* B 49* 380/80* * FK 40* F 34* FL 34* G 198* I 198* FM 16* J 16* A 441* B 37* C 94* * E 14* F 140* G 16* H 11* I 84* J 3* K 8* * E 80* H 84* J * L * * E 60* F * 4 7 9H 0* J 0* * for -inch transport pitches. Moulded versions. Rights reserved to amend design data without prior notification. * TPS (Tray-Packing-System). Plate versions may have different packing units. Samples and pre-production needs on request. Updated data on 11

12 WIMA Part Number System A WIMA part number consists of 18 digits and is composed as follows: Field 1-4: Type description Field - 6: Rated voltage Field 7-10: Capacitance Field 11-1: Size and PCM Field 13-14: Version code (e.g. Snubber versions) Field 1: Capacitance tolerance Field 16: Packing Field 17-18: Pin length (untaped) M K S C A 0 0 M S S MKS 63 VC 0.01 mf. x 6. x % bulk 6 - Type description: Rated voltage: Capacitance: Size: Tolerance: SM-PET = SMT 0 VC = B0 pf = x 3.3 x 3 Size 181 = KA ±0 % = M SM-PEN = SMN 63 VC = C0 47 pf = x 3.3 x 4 Size 181 = KB ±10 % = K SM-PPS = SMI 100 VC = pf = x.1 x 3. Size 0 = QA ± % = J FKP 0 = FKP0 0 VC = F0 10 pf = x.1 x 4. Size 0 = QB ±. % = H MKS 0 = MKS0 400 VC = G0 0 pf = x 6.1 x 3 Size 84 = TA ±1 % = E FKS = FKS 40 VC = H0 330 pf = x 6.1 x Size 84 = TB... FKP = FKP 0 VC = H 470 pf = x 7.6 x Size 4030 = VA FKS 3 = FKS3 600 VC = I0 680 pf = x 10. x 6 Size 040 = XA FKP 3 = FKP VC = J pf = x 13.7 x 7 Size 604 = YA Packing: MKS = MKS 700 VC = K0 100 pf = 110. x 7 x 4.6 PCM. = 0B AMMO H x 340 = A MKP = MKP 800 VC = L0 00 pf = 10 3 x 7. x 4.6 PCM. = 0C AMMO H x 370 = B MKS 4 = MKS4 80 VC = M pf = x 6. x 7. PCM = 1A AMMO H x 340 = C MKP 4C = MKPC 900 VC = N0 = x 7. x 7. PCM = 1B AMMO H x 370 = MKP 4 = MKP VC = O pf = x 7 x 10 PCM 7. = A REEL H = F MKP 10 = MKP VC = P mf = x 8. x 10 PCM 7. = B REEL H = H FKP 1 = FKP1 100 VC = Q0 0.0 mf = 0 3 x 9 x 13 PCM 10 = 3A REEL H = I MKP-X = MKX 10 VC = R mf = x 9 x 13 PCM 10 = 3C REEL H = J MKP-X1 R = MKX1 100 VC = S0 0.1 mf = 3100 x 11 x 18 PCM 1 = 4B ROLL H16. = N MKP-Y = MKY 1600 VC = T0 0. mf = 30 6 x 1. x 18 PCM 1 = 4C ROLL H18. = O MP 3-X = MPX 000 VC = U mf = 3470 x 14 x 6. PCM. = A BLISTER W1 180 = P MP 3-X1 = MPX1 00 VC = V0 1 mf = x 1 x 6. PCM. = B BLISTER W1 330 = Q MP 3-Y = MPY 3000 VC = W0. mf = 40 9 x 19 x 31. PCM 7. = 6A BLISTER W = R MP 3R-Y = MPRY 4000 VC = X0 4.7 mf = x1 x 31. PCM 7. = 6B BLISTER W4 330 = T MKP 4F = MKPF 6000 VC = Y0 10 mf = x 19 x 41. PCM 37. = 7A Bulk/TPS Standard = S Snubber MKP = SNMP 0 VAC = 0W mf = 0 11 x x 41. PCM 37. = 7B... Snubber FKP = SNFP 7 VAC = 1W 47 mf = x 31 x 6 PCM 48. = 8 GTO MKP = GTOM 300 VAC = W 100 mf = 6100 x 4 x 7 PCM. = 9 C-LINK MKP 3 = CP3 30 VAC = AW 0 mf = C-LINK MKP 4 = CP4 30 VAC = BW 1000 mf = 7100 C-LINK MKP 4S = CPS 440 VAC = 4W 100 mf = 710 C-LINK MKP = CP 00 VAC = W... Version code: Pin length (untaped) C-LINK MKP 6 = CP6... Standard = ±0. = C9 C-LINK HC = CHC Version A1 = 1A 6 - = S C-LINK HY = CHY Version A1.1.1 = 1B 16 ±1 = P1 Version A = A Pin length (taped) none = 00 The data on this page is not complete and serves only to explain the part number system. Part number information is listed on the pages of the respective WIMA range. 146

Capacitance range: 100 pf to 0.22 mf (E12-values on request) Rated voltages:

Capacitance range: 100 pf to 0.22 mf (E12-values on request) Rated voltages: WIMA FKP 1 Polypropylene (PP) Capacitors for Pulse Applications with Metal Foil Electrodes, Schoopage Contacts, ouble-sided Metallization and Self-Healing Internal Series Connection for Highest Current

More information

Reference frequency 1 khz in accordance with IEC Maximum pulse rise time: Mechanical Tests

Reference frequency 1 khz in accordance with IEC Maximum pulse rise time: Mechanical Tests Factor WIMA MKP 4C NEW Compact Type: Metallized Polypropylene (PP)- Capacitors in PCM 0 mm to. mm. Capacitances from 0.068 mf to. mf. Rated Voltages from 40 VC to 630 VC. Special Features Very compact

More information

Capacitance range: 0.01 mf to 2.2 mf Rated voltages: 630 VDC 1000 VDC 1600 VDC 2000 VDC 3000 VDC 4000 VDC

Capacitance range: 0.01 mf to 2.2 mf Rated voltages: 630 VDC 1000 VDC 1600 VDC 2000 VDC 3000 VDC 4000 VDC WIMA Snubber FKP Snubber FKP Capacitors for High Pulse Applications with Metal Foil Electrodes, Schoopage Contacts and Self-Healing Internal Series Connection Special Features High pulse duty Self-healing

More information

Capacitance range: 0.01 mf to 2.2 mf Rated voltages: 630 VDC 1000 VDC 1600 VDC 2000 VDC 3000 VDC 4000 VDC

Capacitance range: 0.01 mf to 2.2 mf Rated voltages: 630 VDC 1000 VDC 1600 VDC 2000 VDC 3000 VDC 4000 VDC WIMA Snubber FKP Snubber FKP Capacitors for High Pulse Applications with Metal Foil Electrodes, Schoopage Contacts and Self-Healing Internal Series Connection Special Features High pulse duty Self-healing

More information

at f C 20 mf 20 mf < C T 50 mf C > 50 mf 1 khz 3 x x x 10-4 Mounting Recommendation

at f C 20 mf 20 mf < C T 50 mf C > 50 mf 1 khz 3 x x x 10-4 Mounting Recommendation GTO MKP Capacitors for Pulse Applications with Internal Series Connection Special Features Pulse duty construction Self-healing Cylindrical capacitor body with axial screw and thread connections size M6

More information

Capacitance range: mf to 25 mf Rated voltages: mf 250 VDC 400 VDC 630 VDC 1000 VDC 1600 VDC 2000 VDC 3000 VDC

Capacitance range: mf to 25 mf Rated voltages: mf 250 VDC 400 VDC 630 VDC 1000 VDC 1600 VDC 2000 VDC 3000 VDC WIMA Snubber MKP Snubber MKP Capacitors for Pulse Applications with ouble-sided Metallized Electrodes, Schoopage Contacts and Internal Series Connection Special Features Pulse duty construction Self-healing

More information

Dip Solder Test/Processing

Dip Solder Test/Processing IMA SM-PEN Metallize Polyethylene-Naphthalate (PEN) SM Film Capacitors with Box Encapsulation. Capacitances from 0.01 mf to 1.0 mf. Rate Voltages from 63 VC to 400 VC. Size Coes from 1812 to 2824. Special

More information

Metallized Polypropylene Film Capacitor Related Document: IEC

Metallized Polypropylene Film Capacitor Related Document: IEC MKP 184 Metallized Polypropylene Film Capacitor Related Document: IEC 6084-16 MAIN APPLICATIONS: High voltage, high current and high pulse operations, deflection circuits in TV sets (S-correction and fly-back

More information

Metallized Polypropylene Film Capacitor Related Document: IEC

Metallized Polypropylene Film Capacitor Related Document: IEC Related Document: IEC 6084-16 MKP 184 Dimensions in millimeters 40.0 ±.0 L 40.0 ±.0 Max. MAIN APPLICATIONS High voltage, high current and high pulse operations, deflection circuits in TV sets (S-correction

More information

WIMA SuperCap C. Double-Layer Capacitors in Cylindrical Metal Case with very High Capacitances in the Farad Range. Typical Applications

WIMA SuperCap C. Double-Layer Capacitors in Cylindrical Metal Case with very High Capacitances in the Farad Range. Typical Applications WIMA SuperCap C ouble-layer Capacitors in Cylindrical Metal Case with very High Capacitances in the Farad Range Special Features Storage capacitors with very high capacitance values of 110 F and 200 F

More information

MADE IN GERMANY Film Capacitors for Electronic Equipment

MADE IN GERMANY Film Capacitors for Electronic Equipment http://www.wima.com MAE IN GERMANY Film Capacitors for Electronic Equipment Edition 016 Content SM Plastic Film Capacitors Size Codes 181 to 604 Subminiature Capacitors PCM. mm Film/Foil Capacitors PCM

More information

U 250 VDC 100 V 1 x 10 4 M 3000 sec (M x mf)

U 250 VDC 100 V 1 x 10 4 M 3000 sec (M x mf) IMA SM-PET Metallize Polyester (PET) SM Film Capacitors with Box Encapsulation. Capacitances from 0.01 mf to 6.8 mf. Rate Voltages from 63 VC to 1000 VC. Size Coes from 1812 to 6054. Special Features Size

More information

Metallized Polypropylene Film Capacitor Related Document: IEC

Metallized Polypropylene Film Capacitor Related Document: IEC Metallized Polypropylene Film Capacitor Related Document: IEC 6084-6 MKP 84 L Max. Dimensions in millimeters W Max. Marking FEATURES Product is completely lead (Pb)-free Product is RoHS-compliant 0.6 pcm

More information

AC and Pulse Film/Foil Capacitors Radial Potted Type

AC and Pulse Film/Foil Capacitors Radial Potted Type KP186 AC and Pulse Film/Foil Capacitors Radial Potted Type FEATURES Material categorization: For definitions of compliance please see www.vishay.com/doc?9991 APPLICATIONS High voltage, very high current

More information

Capacitors for Use in Electronics

Capacitors for Use in Electronics Capacitors for Use in Electronics Capacitors 1 Contents General information on Iskra Capacitors for use in electronics Type Construction of capacitors Class Page KFU polyester capacitors (KT) 13 KEU metallized

More information

Double Metallized Polypropylene Film Capacitor Radial AC and Pulse Capacitor

Double Metallized Polypropylene Film Capacitor Radial AC and Pulse Capacitor End of Life September 018 - Alternative Device: MMKP8 Double Metallized Polypropylene Film Capacitor Radial AC and Pulse Capacitor FEATURES Material categorization: for definitions of compliance please

More information

Capacitors. Typical electrical characteristics of metallized polyester capacitors KEU. Type KEU Metallized polyester capacitors

Capacitors. Typical electrical characteristics of metallized polyester capacitors KEU. Type KEU Metallized polyester capacitors Capacitors Type KEU Metallized polyester capacitors As a dielectric high quality polyester film with good electrical properties is used. Electrodes of capacitor are vacuum metallized aluminium. The thickness

More information

Metallized Polypropylene Capacitor, Mini-Version (-M) Related Document: CECC

Metallized Polypropylene Capacitor, Mini-Version (-M) Related Document: CECC MKP 840.../...-M Metallized Polypropylene Capacitor, Mini-Version (-M) Related Document: CECC 00 0.6 pcm ± 0.4 Dimensions in millimeters MAIN APPLICATIONS High frequency and pulse operations. Deflection

More information

1 x 10 4 M U 250 VDC 100 V. Dip Solder Test/Processing

1 x 10 4 M U 250 VDC 100 V. Dip Solder Test/Processing IMA SM-PET Metallize Polyester (PET) SM Film Capacitors with Box Encapsulation Special Features Size coes 1812, 2220, 2824, 4030, 5040 an 6054 with PET an encapsulate Operating temperature up to 100 C

More information

1 x 10 4 M (mean value: 5 x 10 4 M ) Measuring time: 1 min. Dissipation factors at +20) C: tan d U 250 VDC 100 V

1 x 10 4 M (mean value: 5 x 10 4 M ) Measuring time: 1 min. Dissipation factors at +20) C: tan d U 250 VDC 100 V IMA SM-PEN Metallize Polyethylene-Naphthalate (PEN) SM Film Capacitors with Box Encapsulation Special Features Size coes 1812, 2220, 2824, 4030, 5040 an 6054 with PEN an encapsulate Operating temperature

More information

Applications. Capacitance Code (pf) First two digits represent significant figures. Third digit specifies number of zeros.

Applications. Capacitance Code (pf) First two digits represent significant figures. Third digit specifies number of zeros. AC Line EMI Suppression and RC Networks P409 Series, Integrated Resistor, Metallized Impregnated Paper, Class X2, 275 VAC Overview Applications The P409 Series is constructed of multilayer metallized paper

More information

Applications. Capacitance Code (pf) First two digits represent significant figures. Third digit specifies number of zeros.

Applications. Capacitance Code (pf) First two digits represent significant figures. Third digit specifies number of zeros. AC Line EMI Suppression and RC Networks P410 Series, Integrated Resistor, Metallized Impregnated Paper, Class X1, 300 VAC Overview Applications The P410 Series is constructed of multilayer metallized paper

More information

Metallized Polyester Film Capacitor Related Document: IEC

Metallized Polyester Film Capacitor Related Document: IEC Metallized Polyester Film Capacitor Related Document: IEC 6084- MKT 8 Dimensions in millimeters Ø d FEATURES Product is completely lead (Pb)-free Product is RoHS compliant 40.0 ±.0 L 40.0 ±.0 Max. d D

More information

Varistors to

Varistors to FEATURES Zinc oxide disc, epoxy coated Straight leads Straight leads with flange (2322 592 and 593 series only) Kinked leads. APPLICATION Suppression of transients. DESCRIPTION The varistors consist of

More information

Metallized Polyester Film Capacitors (MKT-S)

Metallized Polyester Film Capacitors (MKT-S) Metallized Polyester Film Capacitors (MKT-S) Series/Type: B32538 The following products presented in this data sheet are being withdrawn. Ordering Code Substitute Product Date of Withdrawal Deadline Last

More information

Resin-Molded, Radial-Lead Solid Tantalum Capacitors

Resin-Molded, Radial-Lead Solid Tantalum Capacitors Resin-Molded, Radial-Lead Solid Tantalum Capacitors PERFORMANCE CHARACTERISTICS Operating Temperature: - 55 C to +25 C (above 85 C, voltage derating is required) Capacitance Range: 0. μf to 3 μf Capacitance

More information

R.46. X2 CLASS (IEC ) - MKP Series SELF-HEALING PROPERTIES 09/

R.46. X2 CLASS (IEC ) - MKP Series SELF-HEALING PROPERTIES 09/ Loose Taped X CLASS (IEC 60384-4) - MKP Series Typical applications: interference suppression and «across-the-line» applications. Suitable for use in situations where failure of the capacitor would not

More information

Resin-Molded, Radial-Lead Solid Tantalum Capacitors

Resin-Molded, Radial-Lead Solid Tantalum Capacitors Resin-Molded, Radial-Lead Solid Tantalum Capacitors PERFORMANCE CHARACTERISTICS Operating Temperature: -55 C to +25 C (above 85 C, voltage derating is required) Capacitance Range: 0. μf to 3 μf Capacitance

More information

AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC

AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC FEATURES Complying with IEC 60384-14 4 th edition Can pass 10 kv pulses (10 per polarity) Withstands 85 / 85 / 1000 h test Reduced

More information

Interference suppression film capacitors MKP 336 1

Interference suppression film capacitors MKP 336 1 MKP RADIAL POTTED TYPE PITCH /15/22.5/27.5 mm l b h lt P d t CBA196 Fig.1 Simplified outlines. FEATURES to 27.5 mm lead pitch Supplied loose in box and taped on reel Consists of a low-inductive wound cell

More information

Metallized polyester film capacitors MKT 470

Metallized polyester film capacitors MKT 470 MKT RADIAL POTTED TYPE PITCH 5 mm CBA141 Fig.1 Simplified outlines. FEATURES Low-inductive wound cell of metallized (PETP) film Potted with epoxy resin in a flame-retardant case Radial leads of solder-coated

More information

Zinc Oxide Varistors. VE/VF Types for Heavy Duty Applications ( P Series ) FEATURES PARTICULAR CHARACTERISTICS 18 TPC

Zinc Oxide Varistors. VE/VF Types for Heavy Duty Applications ( P Series ) FEATURES PARTICULAR CHARACTERISTICS 18 TPC VE/VF Types for Heavy Duty Applications ( P Series ) FEATURES P Series are especially dedicated to heavy duty applications encountered in the AC power network. Higher surge current and energy ratings provide

More information

Metallized Polyester PCMT 369 film capacitors

Metallized Polyester PCMT 369 film capacitors MKT RADIAL LACQUERED CAPACITORS (Dipped Type) Pitch 10.0/15.0/22.5/27.5 mm (reduced pitch ; 7.5mm) QUICK REFERENCE DATA Capacitance range (E12 series) Capacitance tolerance Rated voltage V Rdc Climatic

More information

AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type

AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type FEATURES 5 mm to 37.5 mm lead pitch Material categorization: for definitions of compliance please see www.vishay.com/doc?9992

More information

Snubber MMKP 386 AC and pulse double metallized film capacitor

Snubber MMKP 386 AC and pulse double metallized film capacitor Page 1 of 19 VISHAY BCcomponents Snubber MMKP 386 AC and pulse double metallized film capacitor File under TPD sheet 190, HQN-384-17/110 Page 2 of 19 Pb AC and Pulse Double Metallized polypropylene MMKP

More information

AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type

AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type FEATURES 7.5 mm to 37.5 mm lead pitch Material categorization: for definitions of compliance please see /doc?99912 APPLICATIONS

More information

MKP.g. 1.0 Rated Values and Operational Data

MKP.g. 1.0 Rated Values and Operational Data Applications DC and AC voltages Professional Applications Tuned circuits, filters, timers Integrators, S/H Coupling / decoupling, audio Instrumentation Main Characteristics Dry film-foil based technology

More information

AC and Pulse PCMP 384 Double Side Metallized Polypropylene film Capacitors

AC and Pulse PCMP 384 Double Side Metallized Polypropylene film Capacitors MMKP RADIAL POTTED CAPACITORS Pitch 10.0/15.0/22.5mm ( reduced pitch 7.5mm) QUICK REFERENCE DATA Capacitance range (E24 series) Capacitance tolerance Rated voltage (DC) Climatic category Rated temperature

More information

DATA SHEET. Radial series Leaded ceramic multilayer capacitors. BCE Sud Passive Components Oct 16

DATA SHEET. Radial series Leaded ceramic multilayer capacitors. BCE Sud Passive Components Oct 16 DATA SEET File under BCE Sud Passive Components, 2003 Oct 16 BCE Sud Passive Components A former part of Philips Components FEATURES Very high capacitance per unit volume Low cost. APPLICATIONS These conformally

More information

Funkentstör-Kondensatoren der Klasse X2

Funkentstör-Kondensatoren der Klasse X2 STÖRSCHUTZ-KONDENSATOREN Funkentstör-Kondensatoren der Klasse X2 TECHNICAL TERMS EXPLANATION Rated capacitance Capacitance referred to 1 khz, 20 +-1ºC, 65+-2% of relative humidity and 96+- 10 kpa. In case

More information

WCAP-FTXX Film Capacitors

WCAP-FTXX Film Capacitors A Dimensions: [mm] B Recommended hole pattern: [mm] D1 Electrical Properties: Properties Test conditions Value Unit Tol. Capacitance 1 V/ 1 khz ± 0.2 khz C 0.1000 µf ± 10% Rated voltage U R 310 V (AC)

More information

Plastic Film Capacitors. Metallized Polypropylene Film Capacitor E C W F D E C W F D

Plastic Film Capacitors. Metallized Polypropylene Film Capacitor E C W F D E C W F D Metallized Polypropylene Film Capacitor Type : ECWFD Non-inductive construction using metalized Polypropylene film with flame retardant epoxy resin coating. Features Small size Excellent frequency characteristics

More information

Polystyrene capacitors. ACOA Srl S.S. 24 km 16, ALPIGNANO (Torino) - Italy - Tel Fax

Polystyrene capacitors. ACOA Srl S.S. 24 km 16, ALPIGNANO (Torino) - Italy - Tel Fax Polystyrene capacitors ACOA Srl S.S. 24 km 16,2-10091 ALPIGNANO (Torino) - Italy - Tel. +39.011.9784411 - Fax +39.011.9785250 www.acoa-capacitors.it DIELECTRIC POLYSTYRENE FILM FOIL (KS) Series PLB/1 PLB/3

More information

Multilayer Ceramic Capacitors Leaded Capacitors. Packaging. Internal coding. Capacitance tolerance

Multilayer Ceramic Capacitors Leaded Capacitors. Packaging. Internal coding. Capacitance tolerance Leaded Capacitors Leaded Ordering code system B37979N 1 100 K 0 54 Packaging 51 ^ cardboard tape, reel packing (360-mm reel) 54 ^ Ammo packing (standard) 00 ^ bulk Internal coding Capacitance tolerance

More information

AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC

AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC AC Line Rated Ceramic Disc Capacitors Class X1, 760 V AC, Class Y1, 500 V AC FEATURES Complying with IEC 60384-14 4 th edition High reliability Vertical (inline) kinked or straight leads Singlelayer AC

More information

Characteristics Climatic Category 40/105/56 (IEC 61071)

Characteristics Climatic Category 40/105/56 (IEC 61071) Polypropylene Film Capacitors for Snubber Applications Features - 105 C - Very low dissipation factor - Highest peak pulse capability - Double-sided metallized electrodes - Internal series connection -

More information

Recommended Land Pattern: [mm]

Recommended Land Pattern: [mm] Dimensions: [mm] Recommended Land Pattern: [mm] Electrical Properties: Properties Test conditions Value Unit Tol. Capacitance 1 V/ 1 khz ± 0.2 khz C 150 nf ±10% Rated Voltage U R 310 V (AC) max. Rated

More information

MKP-X2 TECHNICAL TERMS EXPLANATION

MKP-X2 TECHNICAL TERMS EXPLANATION TECHNICAL TERMS EXPLANATION Rated capacitance Capacitance referred to 1 khz, 20 +-1ºC, 65+-2% of relative humidity and 96+- 10 kpa. In case of doubt please refer to IEC 60068-1, sub-clause 5.2. Capacitance

More information

DC Film Capacitors MKT Axial Type

DC Film Capacitors MKT Axial Type MKT181 DC Film Capacitors MKT Axial Type FEATURES Supplied loose in box, taped on ammopack or reel Material categorization: For definitions of compliance please see www.vishay.com/doc?9991 APPLICATIONS

More information

DC Film Capacitors MKT Radial Potted Type

DC Film Capacitors MKT Radial Potted Type DC Film Capacitors MKT Radial Potted Type MKT80 FEATURES AEC-Q00 qualified (rev. D) for PCM. mm (for larger available components on request) High temperature capabilities, up to 0 C Capacitance up to 60

More information

CCDSeries FEATURES ORDERING CODE CCD B 101 K H 7 2 (1) (2) (3) (4) (5) (6) (7) (8) (9) Safety Standard Recognized Ceramic Capacitors

CCDSeries FEATURES ORDERING CODE CCD B 101 K H 7 2 (1) (2) (3) (4) (5) (6) (7) (8) (9) Safety Standard Recognized Ceramic Capacitors CCDSeries Configuration FEATURES Complying with IEC60384-14 4 th Edition Class X1Y1 and Class X1Y2 Dielectric Strength: AC2600V (r.m.s) for X1Y2 and AC4000V (r.m.s) for X1Y1 High Releability Coated With

More information

Solid Tantalum Chip Capacitors TANTAMOUNT, Low Profile, Conformal Coated, Maximum CV

Solid Tantalum Chip Capacitors TANTAMOUNT, Low Profile, Conformal Coated, Maximum CV Solid Tantalum Chip Capacitors TANTAMOUNT, Low Profile, Conformal Coated, Maximum CV FEATURES New case size offerings. 2mm height Terminations: Tin (2) standard. Low ESR 8mm, 12mm tape and reel packaging

More information

Characteristics Climatic Category 40/85/56 (IEC 61071) Operating Temperature. 700 ~ 2000 VDC Capacitance Range 0,2 ~ 7,5 µf Capacitance Tolerance

Characteristics Climatic Category 40/85/56 (IEC 61071) Operating Temperature. 700 ~ 2000 VDC Capacitance Range 0,2 ~ 7,5 µf Capacitance Tolerance Polypropylene Film Capacitors for Snubber Applications Features - Very low dissipation factor - Highest peak pulse capability - Double-sided metallized electrodes - Internal series connection - Metal sprayed

More information

Ceramic Disc DC Capacitors Class 2, Low Loss 500 V, 1 kv, 2 kv and 3 kv

Ceramic Disc DC Capacitors Class 2, Low Loss 500 V, 1 kv, 2 kv and 3 kv Ceramic Disc DC Capacitors Class 2, tangent line D SH FEATURES High reliability Low losses High capacitance in small size Kinked leads Compliant to RoHS directive 2002/95/EC F Capacitors with inside kink

More information

Ceramic Disc Capacitors Class 1, 3 kv DC

Ceramic Disc Capacitors Class 1, 3 kv DC S Series Ceramic Disc Capacitors D D FEATURES Low losses High stability Tangent line SH Tangent line SH High capacitance in small size Kinked (preferred) or straight leads Compliant to RoHS directive 2002/095/EC

More information

DC Film Capacitors MKT Axial Type

DC Film Capacitors MKT Axial Type MKT 181 Ø d FEATURES Supplied loose in box, taped on ammopack or reel RoHS compliant L 40.0 ±.0 40.0 ±.0 Max. Dimensions in mm D Max. ENCAPSULATION Plastic-wrapped, epoxy resin sealed, flame retardant

More information

High-ohmic/high-voltage resistors

High-ohmic/high-voltage resistors FEATURES These resistors meet the safety requirements of: UL1676 (range 510 kω to 11 MΩ) EN60065 BS60065 (U.K.) NFC 92-130 (France) VDE 0860 (Germany) High pulse loading capability Small size. APPLICATIONS

More information

AC and Pulse Metallized Polypropylene Film Capacitors MKP Axial Type

AC and Pulse Metallized Polypropylene Film Capacitors MKP Axial Type Vishay Roederstein AC and Pulse Metallized Polypropylene Film Capacitors FEATURES Supplied loose in box, taped on ammopack or reel available on request l t APPLICATIONS High current and high pulse operations

More information

Class 1, 100 V (DC) (flanged types) Miniature ceramic plate capacitors

Class 1, 100 V (DC) (flanged types) Miniature ceramic plate capacitors FEATURES High-frequency circuits Temperature compensating High stability Space saving. APPLICATIONS In a great variety of electronic circuits, e.g. in filters and tuning circuits where high stability and/or

More information

EMI Suppression PCRC 420 film capacitors (RC unit)

EMI Suppression PCRC 420 film capacitors (RC unit) MKP RADIAL POTTED CAPACITORS Pitch 15.0/17.5 mm P = 15.0 / 17.5mm QUICK REFERENCE DATA Capacitance value Capacitance tolerance Resistance value Resistance tolerance Rated (AC) voltage 50 to 60 Hz Climatic

More information

Applications. Capacitance Code (pf)

Applications. Capacitance Code (pf) General Purpose, Pulse and DC Transient Suppression PME261 Metallized Impregnated Paper, 10.2 25.4 mm Lead Spacing, 400 1,000 VDC Overview Applications The PME261 is multilayer metallized paper, encapsulated

More information

4 400 VDC VDC H ±3 % J ±5 % 40 C to +105 C 400 VDC, 630 VDC

4 400 VDC VDC H ±3 % J ±5 % 40 C to +105 C 400 VDC, 630 VDC Plastic Film Capacitors Metallized Polypropylene Film Capacitor Type: ECWF(L) Designed for high frequency and current applications. Features Small size Excellent frequency characteristics Low loss 8 C,

More information

Precision Leaded Resistors

Precision Leaded Resistors FEATURES Approved according to CECC 40101-806 Advanced thin film technology Low TC: ± 15 to Precision tolerance of value: ± 0.1 % and ± 0.25 % Superior overall : class 0.05 Wide precision range: 10 to

More information

Characteristics Climatic Category 40/105/56 (IEC 61071)

Characteristics Climatic Category 40/105/56 (IEC 61071) Polypropylene Film Capacitors for Snubber Applications Features - Very low dissipation factor - High peak pulse capability - Plates for direct IGBT connection - Self-healing - 105 C CBB 165 IS Series Applications

More information

Applications C28 4 A C A 4300 AL 0 J. Terminal Style

Applications C28 4 A C A 4300 AL 0 J. Terminal Style C8, Cylindrical Plastic Case, Segmented Film 40 VAC/470 VAC Overview The C8 capacitor is a polypropylene metallized segmented film capacitor with a cylindrical, plastic can-type design filled with resin.

More information

Characteristics Climatic Category 40/105/56 (IEC 61071) Operating Temperature. 850 ~ 1200 VDC Capacitance Range 0,33 ~ 3,0 µf Capacitance Tolerance

Characteristics Climatic Category 40/105/56 (IEC 61071) Operating Temperature. 850 ~ 1200 VDC Capacitance Range 0,33 ~ 3,0 µf Capacitance Tolerance Polypropylene Film Capacitors for Snubber Applications Features - 105 C - Very low dissipation factor - High peak pulse capability - Metal sprayed contacts for low ESL - Plates for direct IGBT connection

More information

Film Capacitors. Metallized Polyester Film Capacitors (MKT) Series/Type: B32593, B32594 Date: December 2018

Film Capacitors. Metallized Polyester Film Capacitors (MKT) Series/Type: B32593, B32594 Date: December 2018 Film Capacitors Metallized Polyester Film Capacitors (MKT) Series/Type: B32593, B32594 Date: December 2018 TDK Electronics AG 2018. Reproduction, publication and dissemination of this publication, enclosures

More information

Metallized Polypropylene film capacitor PCMP 371

Metallized Polypropylene film capacitor PCMP 371 MKP RADIAL POTTED CAPACITORS Pitch 22.5/27.5 mm QUICK REFERENCE DATA Capacitance range Capacitance tolerance Rated voltage (AC) Rated Frequency Climatic category Temperature range Reference specification

More information

Applications R66 E D 3100 AA 7A J. Capacitance Code (pf) digits represent significant figures. First digit specifies the number of zeros to be added.

Applications R66 E D 3100 AA 7A J. Capacitance Code (pf) digits represent significant figures. First digit specifies the number of zeros to be added. R66, Radial, 7.5 mm Lead Spacing, 50 630 VDC (Automotive Grade) Overview The R66 Series is constructed of metallized polyester film (wound or stacked technology) with radial leads of tinned wire. Radial

More information

Axial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 50 V DC, 100 V DC, 200 V DC

Axial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 50 V DC, 100 V DC, 200 V DC Axial Leaded Multilayer Ceramic Capacitors for Automotive Applications Class 1 and Class 2, 50 V DC, 100 V DC, 200 V DC FEATURES AEC-Q200 qualified with PPAP available High reliability MLCC insert with

More information

Metallized Polyester Film Capacitors MKT Radial Potted Type

Metallized Polyester Film Capacitors MKT Radial Potted Type www.vishay.com Metallized Polyester Film Capacitors MKT Radial Potted Type FEATURES 7.5 mm lead pitch Supplied loose in box and taped on reel or ammopack Material categorization: for definitions of compliance

More information

50 TZV 1500 M JDE VB 18X21.5

50 TZV 1500 M JDE VB 18X21.5 EXTENDED BASE FEATURES: VB- VIBRATION BASE AEC-Q200 SURFACE MOUNT ROHS COMPLIANT APPLICATIONS: AUTOMOTIVE POWER INDUSTRIAL SPEC: VALUE: MPN :50 TZV 1500 M JDE VB 18X21.5 VDC 50 CAPACITANCE 1500μF +/- 20%

More information

POE INTERNATIONAL CORPORATION. SPECIFICATION OF MULTI-LAYER RADIAL-LEADED TYPE CAPACITOR Ver: 8 Page: 1

POE INTERNATIONAL CORPORATION. SPECIFICATION OF MULTI-LAYER RADIAL-LEADED TYPE CAPACITOR Ver: 8 Page: 1 SPECIFICATION OF MULTI-LAYER RADIAL-LEADED TYPE CAPACITOR Ver: 8 Page:. Scope: Its specification applies to Radial Series Ceramic Capacitor. 2.How to order: CODE: U RD2 R 02 K T Rated Voltage Code:U =

More information

AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type

AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type FEATURES 7.5 mm to 37.5 mm lead pitch; 7.5 mm bent back pitch Low contact resistance Low loss dielectric Small dimensions

More information

0.5 (.020) (.051) 0.2 (.008) min 0.2 (.008) min

0.5 (.020) (.051) 0.2 (.008) min 0.2 (.008) min With Nickel Barrier Termination NB 12 - NB 20 Chip thermistors are high quality and low cost devices especially developed for surface mounting applications. They are widely used for temperature compensation

More information

TPC Suppressor Capacitors Classes X & Y A KYOCERA GROUP COMPANY

TPC Suppressor Capacitors Classes X & Y A KYOCERA GROUP COMPANY Suppressor Capacitors Classes X & Y A KYOCERA GROUP COMPANY Contents General Technical Information on Interference Suppression..... 2 Ordering Code......................................... 3 QX Series

More information

Capacitance Cap. Tol. Suffix construction. Rated voltage 450 VDC

Capacitance Cap. Tol. Suffix construction. Rated voltage 450 VDC Metallized Polypropylene Film Capacitors Type:ECWFD Plastic Film Capacitors Non-inductive construction using metalized Polypropylene film with flame retardant epoxy resin coating. Features Small size Excellent

More information

Applications. Capacitance Tolerance G = ±2% J = ±5%

Applications. Capacitance Tolerance G = ±2% J = ±5% Surface Mount Metallized PPS Film Capacitor LDB, Unencapsulated Stacked Chip, Size 1206 1812, 16 and 50 VDC Overview Polyphenylene sulphide (PPS) film capacitor for surface mounting. Applications Typical

More information

Standard Metal Film Leaded Resistors

Standard Metal Film Leaded Resistors Standard Metal Film Leaded Resistors A homogeneous film of metal alloy is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned connecting leads of

More information

COPAL ELECTRONICS. F T T V 5 k Ω ( ) SINGLE TURN CERMET TRIMMERS FEATURES PART NUMBER DESIGNATION

COPAL ELECTRONICS. F T T V 5 k Ω ( ) SINGLE TURN CERMET TRIMMERS FEATURES PART NUMBER DESIGNATION SINGLE TURN INTERNAL STRUCTURE 4 5 8 6 FEATURES Lead-free soldering, Cadmium-free Nominal resistance tolerance ± 0 % O ring sealed and washable Suitable for automatic insertion and automatic adjustment

More information

Interference Suppression Film Capacitor - Class X1 Radial MKP 440 V AC - Standard Across the Line

Interference Suppression Film Capacitor - Class X1 Radial MKP 440 V AC - Standard Across the Line Interference Suppression Film Capacitor - Class X1 Radial MKP 440 V AC - Standard Across the Line FEATURES 15 mm to 27.5 mm lead pitch 440 V rated AC voltage Material categorization: For definitions of

More information

Metallized Polyester PCMT 365/366/367 film capacitors

Metallized Polyester PCMT 365/366/367 film capacitors Metallized Polyester PCMT 365/366/367 MKT RADIAL LACQUERED CAPACITORS (Dipped Type) - Orange Pitch 5.0/7.5mm 365 366 367 QUICK REFERENCE DATA acitance range (E12 series) 0.001 to 1.0μF acitance tolerance,

More information

Applications C9T S 5 M D 6137 AAR X. Internal Connection. Terminal Style. M = Screw clamp Terminal

Applications C9T S 5 M D 6137 AAR X. Internal Connection. Terminal Style. M = Screw clamp Terminal Overview Polypropylene metallized film with cylindrical aluminium can type filled with resin, 3 phase delta connection and safety device FPU. Applications Typical applications power factor correction.

More information

Electromagnetic Interference Suppression Capacitors Class X2 305/310VAC TECHNICAL SPECIFICATION. Metallized Polypropylene Film Capacitors (MKP)

Electromagnetic Interference Suppression Capacitors Class X2 305/310VAC TECHNICAL SPECIFICATION. Metallized Polypropylene Film Capacitors (MKP) Electromagnetic Interference Suppression Capacitors Class X2 305/310VAC ISKRA, d.d. Type: KNB1580 Issue: April 2018 PE ISKRA KONDENZATORJI d.d., Vajdova ulica 71, 8333 Semič, SLOVENIA Phone: +386 738 49

More information

DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, X5R

DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, X5R DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 100 µf RoHS compliant Product Specification Product specification 2 Surface-Mount

More information

Applications C4 4 U Q G T F 8 S K. Terminals Code. Capacitance Code (pf)

Applications C4 4 U Q G T F 8 S K. Terminals Code. Capacitance Code (pf) Overview The C44U series is a polypropylene segmented metallized film capacitor with a cylindrical, aluminium can-type design filled with resin. It uses screw terminals and a plastic deck. Applications

More information

FrelTec GmbH. Metal Film Resistor

FrelTec GmbH. Metal Film Resistor GmbH Mathildenstr. 10A 82319 Starnberg Germany Metal Film Resistor 10/5/2010 1/21 Freltec GmbH www.freltec.com SPECIFICATION Part Number 052 012 * N * J * TB * E * 1 * _ * _ * Type 052 : Metal Film Resistor

More information

Suppressor film capacitor Highlight and Application in Series with the main

Suppressor film capacitor Highlight and Application in Series with the main Suppressor film capacitor Highlight and Application in Series with the main April 2007 Paola Bettacchi - Product Manager 1 Film capacitor : main features and performances Process flow charts Self-healing

More information

SINGLE TURN CERMET TRIMMERS

SINGLE TURN CERMET TRIMMERS SINGLE TURN INTERNAL STRUCTURE 4 5!0 9 8 6 FEATURES Lead-free soldering, Cadmium-free Various configurations to choose from Wide variety (4 types) O ring sealed and washable 4 5 6 8 9!0 Part name Housing

More information

DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, X5R

DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, X5R DATA SHEET SURFACE-MOUNT CERAMIC MULTILAYER CAPACITORS General purpose & High capacitance Class 2, 6.3 V TO 50 V 10 nf to 100 µf RoHS compliant Product Specification Product specification 2 Surface-Mount

More information

High Ohmic/High Voltage Resistors

High Ohmic/High Voltage Resistors High Ohmic/High Voltage Resistors VR68 A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper wires are welded

More information

Metallized Polyester Film Capacitors MKT Radial Potted Types

Metallized Polyester Film Capacitors MKT Radial Potted Types www.vishay.com Metallized Polyester Film Capacitors MKT Radial Potted Types FEATURES Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS Blocking, bypassing,

More information

1000 to pf (E3 series) Dielectric material K2000 K5000 K14000 Rated DC voltage 100 V 100 V 63 V Tolerance on capacitance ±10% 20/+50% 20/+80%

1000 to pf (E3 series) Dielectric material K2000 K5000 K14000 Rated DC voltage 100 V 100 V 63 V Tolerance on capacitance ±10% 20/+50% 20/+80% , Class 2, 63,, V and 1 V (DC) handbook, 4 columns FEATURES General purpose Coupling and decoupling Space saving. APPLICATIONS In electronic circuits where non-linear change of capacitance with temperature

More information

Metallized Polypropylene Film Capacitor DC-Link Capacitor MKP Type

Metallized Polypropylene Film Capacitor DC-Link Capacitor MKP Type Metallized Polypropylene Film Capacitor DC-Link Capacitor MKP Type FEATURES Slim line, low building height Very long useful life time: Up to 100 000 h at U NDC and 70 C High ripple current capability,

More information

Recommended Hole Pattern: [mm]

Recommended Hole Pattern: [mm] Dimensions: [mm] Recommended Hole Pattern: [mm] Electrical Properties: Properties Test conditions Value Unit Tol. Capacitance 1 V/ 1 khz ± 0.2 khz C 680 nf ±10% Rated Voltage U R 400 V (DC) Insulation

More information

Applications. Impregnated paper ensures excellent stability and reliability Capacitance range: µf

Applications. Impregnated paper ensures excellent stability and reliability Capacitance range: µf AC Line EMI Suppression and RC Networks PMR209 Series Impregnated Paper, Class X2, 250 VAC Overview Applications The PMR209 Series is constructed of multilayer metallized paper encapsulated and impregnated

More information

DATA SHEET General Purpose Thick Film Chip Resistor CR Series

DATA SHEET General Purpose Thick Film Chip Resistor CR Series Towards Excellence in Quality, Service & Innovation DATA SHEET General Purpose Thick Film Chip Resistor 1% TO 5%, TCR -200 TO +600 SIZE: 01005/0201/0402/0603/0805/1206/1210/2010/2512 RoHs Compliant Jan

More information

Specification KWT803-S

Specification KWT803-S Specification KWT803-S Drawn SSC Approval CUSTOMER Approval Contents 1. Description 2. Absolute Maximum Ratings 3. Electro-Optical Characteristics 4. Characteristic Graph 5. Reliability Test Item and Condition

More information

High Operating Temperature Radial Leaded Multilayer Ceramic Capacitors for Automotive Applications, 50 V DC, 100 V DC, 200 V DC

High Operating Temperature Radial Leaded Multilayer Ceramic Capacitors for Automotive Applications, 50 V DC, 100 V DC, 200 V DC High Operating Temperature Radial eaded Multilayer Ceramic Capacitors for Automotive Applications, 5 V DC, 1 V DC, 2 V DC FEATURES AEC-Q2 qualified with PPAP available High reliability MCC insert with

More information

AC and Pulse PCMP 389 Metallized Polypropylene film capacitors

AC and Pulse PCMP 389 Metallized Polypropylene film capacitors MKP RADIAL POTTED CAPACITORS Pitch 10.0/15.0/22.5/27.5mm (reduced pitch 7.5mm) QUICK REFERENCE DATA Capacitance range (E24 series) Capacitance tolerance Rated voltage (DC) Climatic category Temperature

More information