Rogue Resources Channel Sampling Returns Up to 99.9% SiO2 on Same Quartzite Unit G, 1.4 Km from Last Reported High Grade Results

Transcription

1 Suite W. Georgia Street P.O. Box 11144, Royal Centre Vancouver, BC V6E 3P3 Telephone: September 2, 2015 TSX-V: RRS Rogue Resources Channel Sampling Returns Up to 99.9% SiO2 on Same Quartzite Unit G, 1.4 Km from Last Reported High Grade Results FIVE NEW CHANNEL ASSAY RESULTS FROM TOTAL OF 14 QUARTZITE CHANNELS RECEIVED NEW ASSAYS INCLUDE SAMPLES SITES 1.4 KM EAST OF FIRST SAMPLE SITES ON QUARTZITE UNIT G ASSAYS ON NEWLY DISCOVERED QUARTZITE UNIT H RECEIVED TEN OF TWENTY FIVE PHASE ONE DRILL HOLES COMPLETED VANCOUVER, B.C. Rogue Resources Inc. (TSX-V: RRS) ( Rogue or the Company ) is pleased to announce that assay results from an additional five of fourteen channel sample units comprising 256 samples have been received on the Lac de la Grosse Femelle silica project ( Femelle ) located approximately 42 kilometers ( km ) north of Baie-Saint Paul, Québec, and 4 km northeast of Sitec s operating silica mine. Two new assay results, R9 and R10, are from channel sample sites located up to 1.4 km east of Channels R6 and R7, located on the same G quartzite unit (News Release, August 20, 2015). Newly reported as well is Channel R8 located 50 meters ( m ) east-northeast of R7 on the same unit. The replication of assays over a strike length of 1.4 km on surface is considered indicative of the continuity of high purity silica trends that are contained within the G quartzite unit. Channel R13, 20.7 m long and located on the newly discovered zone H, returned assays from 8 of 12 samples submitted over an accumulated width of 13.7 m with silica purity ranging from 99.0% to 99.9% SiO2. Further sampling and drilling is warranted and will take place in the vicinity of Channel R13. Channel R12, located on the southern edge of the contact with quartzite zone H, returned assays that indicate it is outside of the quartzite unit. The Company is also pleased to announce that 10 of the 25 drill holes planned for Phase One have been completed. In addition to providing core that will be assayed to prove up consistency of silica purity, the drill program is designed to provide the depth of the quartzite units as the width and length are already known visually from surface. To view a drill and channel sampling location map click on the link below:

2 It is extremely encouraging to have high purity silica assays on the eastern portion of the same G quartzite unit that replicate the assays of channels located 1.4 km to the west. Equally gratifying is the silica purity reported in assays from Channel R13 located in the newly discovered zone H where 75% of the 12 samples submitted recorded silica purity of 99.0 to 99.9% SiO2, commented Company President and CEO John de Jong. "Drilling, which is progressing on time and on budget, will help define the quartzite units length, width and depth, and also the consistency of high purity silica throughout the units. All of this information will be utilized as we prepare for a resource calculation early in Channel Sample Results Channel samples, R1 R14, consisting of 256 samples totaling m of channelling were delivered to SGS Laboratories in Québec City, Québec. Assay results for 85 samples over m from channels R8, R9, R10, on the G quartzite unit and R12 and R13 on the newly discovered quartzite unit H have been received. The results of the other 7 channel sample results are still pending. Channel R8A Details: Located on west side of G quartzite unit, 50 m east-northeast of R7 47 samples submitted Total channel sampling length 86.3 m 28.3 m comprising 15 of 47 samples in 3 sequences returned assays of SiO2 (99.0% to 99.8% SiO2) Sequences of Assayed Silica Oxide Contents (Over 99.0% SiO2) o Sequence 1: 16 m 4 m interval assayed between 99.1% to 99.5% SiO2 2 m interval assayed 99.0% SiO2 4 m interval assayed between 99.0% to 99.6% SiO2 o Sequence 2: 16 m 12.0 m (six samples assayed between 99.1% to 99.8% SiO2) 2.0 m interval assayed 99.7% SiO2 o Sequence 3: 4.3 m 3 intervals of 1m to 2m wide assayed between 99.1% to 99.5% SiO2 The higher silica content and purity is contained in quartzites that are white, coarse grain, crystalline, and massive with occasional minor pink staining (oxidation) in some areas.

3 Table #1 - Channel R8 Hole ID Sample From To Width XRF21u Cr2O3 XRF21u XRF21u XRF21u XRF21u XRF21u XRF21u XRF21u XRF21u GRA8 R8A < R8A R8A < R8A R8A < R8A < 0.01 < R8A < R8A R8A < R8A < R8A R8B < < R8B R8B R8B < R8B R8B R8B R8B R8B R8B < R8B < R8B R8B R8B < R8B R8B < R8B < R8B R8B R8B < R8B R8B < R8B R8B R8B R8B R8B <

4 R8B R8B R8B R8B R8B < R8B R8B R8B R8B Channel 9 Details Located 1.28 km east-northeast of channel R8 on the main quartzite zone G Total channel sample length 34 m 10 of 21 samples returned assays ranging between 99.0% to 99.9% SiO2 over combined width of 17 m Sequence of Assayed Silica Oxide Contents (Over 99.0% SiO2) o Sequence 1: 17 m 2.0 m interval assayed 99.0% SiO m interval (six samples assaying between 99.0% to 99.9% SiO2) 4.5 m interval assayed 99.2% The high purity quartzites are white, coarse, crystalline, massive and occasionally light pink Table #2 - Channel R9 Hole ID Sample From To Width XRF21u Cr2O3 XRF21u XRF21u XRF21u XRF21u XRF21u XRF21u XRF21u XRF21u GRA8 R9A R9A R9A R9A R9A R9A R9A R9A R9A R9A R9A R9A R9A R9A R9A R9A < < < <

5 R9A R9A R9A R9A R9A Channel R10 Details: Located 1.34 km east-northeast of channel R8 on the main quartzite zone G. Total channel sample length 10 m 3 samples of 6 collected returned assays ranging between 99.0% to 99.6% SiO2 over combined width of 5.1 m Sequences of Assayed Silica Oxide Contents (Over 99.0% SiO2) o Sequence 1: 5.1 m 2 m interval assayed 99.6% 1.3 m interval assayed 99.6% SiO2 1.8 m interval assayed 99.0% SiO2 The higher silica content and purity was in quartzites that were white, coarse grain, crystalline, hard and massive with minor buff staining (oxidation). Table #3 - Channel R10 Hole ID Sample From To Width XRF21u Cr2O3 XRF21u XRF21u XRF21u XRF21u XRF21u XRF21u XRF21u XRF21u GRA8 R10A R10A R10A R10A R10B R10B < Channel R12 Details: Located 200 m north-northeast of the main quartzite zone G Samples collected are in the para gneisses at the southern edge of the contact and are just outside of the quartzite unit

6 Table #4 - Channel R12 Hole ID Sample From To Width XRF21u Cr2O3 XRF21u XRF21u XRF21u XRF21u XRF21u XRF21u XRF21u XRF21u GRA8 R12A R12A R12A R12A R12A Channel R13 Details: Newly discovered quartzite unit located 200 m north-northeast of the main quartzite zone G Total channel sample length 20.7 m 8 of 12 samples (75%) returned assays ranging between 99.0% to 99.9% SiO2 over combined width of 13.7 m Sequences of Assayed Silica Oxide Contents (Over 99.0% SiO2) o Sequence 1: 13.7 m 4 m interval assayed 99.0 to 99.4% SiO2 6.0 m interval assayed between 99.5 to 99.9% SiO2 3.0 m interval assayed between 99.3 to 99.5% SiO2 0.7 m interval assayed 99.0% SiO2 Further sampling of this quartzite unit at intervals 9 m and 14 m west-southwest of Channel 13 will be undertaken shortly along with planned additional drilling. The higher silica content and purity is in quartzites that are white, coarse grain, crystalline, hard and massive with no discolouration. Table #5- Channel R13 Hole ID Sample From To Width XRF21u Cr2O3 XRF21u XRF21u XRF21u XRF21u XRF21u XRF21u XRF21u XRF21u GRA8 R13A R13A R13A R13A R13A R13A R13A < < <

7 R13A R13A R13A R13A R13A < < Table 6. Channel Location, Length and Sample Units. Channel UTM-E UTM-N Loc Z Length Samples Date DR_DMY R /07/2015 R /07/2015 R /07/2015 R /07/2015 R /07/2015 R /07/2015 R /06/2015 R /07/2015 R /07/2015 R /07/2015 R /07/2015 R /07/2015 R /07/2015 R /07/2015 Total Drilling Update Of the 25 drill holes planned for Phase One drilling, 10 have been completed. All 23 drill pads have been prepared to date. Drilling is designed to test the extent of quartzite units G and the newly discovered H quartzite unit, including their purity, depth, width, and the length of extensions below surface. Drilling takes place 24 hours per day and both Phase One and Phase Two programs are scheduled to be completed by mid-to-late November. Pending results, the Company may increase the initial 5,000 m drill program. As part of the Company s commitment to preserve the local fauna and forest, remediation of each drill site and access point takes place immediately upon leaving the location and as the project progresses. To view a photo of the drill location of drill holes GF15-6 and GF15-7 on top of the quartzite G unit with Sitec s Upper Silica Pit (Bexy) in distance, click on the link below: To view a photo of the drill working on site click on the link below:

8 Table 7. Diamond Drill Holes Completed to Date, Phase One DDH ID UTM E UTM N Elev Line North Bearing Dip Drilled Zone Date Start m Length Drilled Zone E GF15-1 A W 100S Q-E 08/08/2015 GF15-2 A W 80S Q-E 10/08/2015 GF15-3 A W 80S Q-E 12/08/2015 GF15-5 A W 25N Q-E 18/08/2015 GF15-6 A W 15N Q-E 20/08/2015 GF15-7 A W 15N Q-E 22/08/2015 GF15-8 A W 15N Q-E 25/08/2015 GF15-9 A W 8N Q-E 27/08/2015 GF15-10 A W 43N Q-E 29/08/2015 Zone H Ext GF15-4 A E 361N Q-H 15/08/2015 Total Drilled Table 8. Planned Drill Holes Yet To Be Drilled, Phase 1 DDH ID UTM E UTM N Line Northing Bearing Dip Planned Length Zone E L2W W 30N L1W-25 L W 50N L0W-26 M W 50N Zone H Extension L1E-7DDH E E 398N L2E-5DDH F E 392N L4E-3DDH H E 325N L5E-8DDH I E 298N Zone G L4E-2DDH E 15N L5E-16DDH E 25N L6E-17DDH E 43N L7E-18DDH E 32N L8E-19DDH A E 60N L9E-13DDH B E 72N L10E-14DDH C E 100N L11E-20DDH D E 90N Total Zone Q-E Q-E Q-E Q-H Q-H Q-H Q-H About Rogue Resources Inc.

9 With its diverse portfolio of properties, all in good standing, the Company has the ability to focus its efforts and finances on the project that demonstrates the greatest market potential for return. The recent investment of $382 M by the Québec provincial government in Grupo FerroAtlantica, one of the world's largest silicon metal producers, to build a silicon metal plant located near our silica property is a great foundational point to launch this silica rich quartzite property. The Femelle Project is located approximately 42 km north of Baie-Saint Paul, situated on the St. Lawrence River, and is 4 km northeast of the Mine Sitec silica mine, in operation for over fifty years. Access to the project is via a paved highway and well maintained forestry access roads. Qualified Person The Lac de la Grosse Femelle exploration project is under the direct supervision of Eddy Canova, P Geo., and Senior Vice-President of the Company, a Qualified Persons ("QP") as defined by National Instrument The Company's QP has approved the scientific and technical content of this release. On Behalf of Rogue Resources Inc. John de Jong CEO & President For additional information regarding this news release please contact: John de Jong CEO/President (604) john@rogueresources.ca Sean Budnick Investor Relations Montréal, QC (514) Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this news release. Cautionary Note Regarding Forward-Looking Statements: Certain disclosures in this release constitute forward-looking statements, including timing of completion of exploration work. In making the forward-looking statements in this release, the Company has applied certain factors and assumptions that are based on the Company's current beliefs as well as assumptions made by and information currently available to the Company, including that the Company is able to obtain any government or other regulatory approvals, that the Company is able to procure personnel, equipment and supplies required for its exploration and development activities in sufficient quantities and on a timely basis and that actual results are consistent with management's expectations. Although the Company considers these assumptions to be reasonable based on information currently available to it, they may prove to be incorrect, and the forward-looking statements in this release are subject to numerous risks, uncertainties and other factors that may cause future results to differ materially from those expressed or implied in such forward-looking statements. Such risk factors include, among others, those matters identified in its continuous disclosure filings, including its most recently filed MD&A. Readers are cautioned not to place undue reliance on forward-looking statements. The Company does not intend, and expressly disclaims any intention or obligation to, update or revise any forward-looking statements whether as a result of new information, future events or otherwise, except as required by law.